lantiq: use new image build process for brnImages

LZMA compress the kernel without dictionary, otherwise brnboot fails to
uncompress the kernel.

The filesystem parameter of mkbrncmdline was dropped since the used
filesystem isn't exported in the kernel build step and at least in my
tests everything works without the parameter. If the parameter is
required for some reason, the static keyword "squashfs" can be used.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49241 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index 6bad91b..f779a1b 100644 (file)
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -39,12 +39,6 @@ define PatchKernelLzma
        $(call CompressLzma,$(KDIR)/vmlinux$(2)-$(1).tmp,$(KDIR)/vmlinux$(2)-$(1).lzma)
 endef
 
-define MkBrnImage
-       mkbrncmdline -i $(KDIR)/vmlinux-$(5) -o $(KDIR)/vmlinux-$(5)-brn BRN-BOOT $(7)
-       $(call CompressLzma,$(KDIR)/vmlinux-$(5)-brn,$(KDIR)/vmlinux-$(5)-brn.lzma)
-       mkbrnimg -s $(1) -m $(2) -p $(3) -o $(4) $(KDIR)/vmlinux-$(5)-brn.lzma $(KDIR)/root.$(6)
-endef
-
 define MkImageLzma
        mkimage -A mips -O linux -T kernel -a 0x80002000 -C lzma \
                -e 0x80002000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
@@ -61,7 +55,6 @@ endef
 define Image/Build/squashfs
        cat $(KDIR)/uImage-$(2) $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image
        $(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image)
-       $(if $(3),$(call MkBrnImage,$(3),$(4),$(5),$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(3)-brnImage,$(2),$(1),$(6)))
 endef
 
 define Image/BuildNAND/squashfs
@@ -268,6 +261,14 @@ define Build/mktplinkfw2
                -o $@
 endef
 
+define Build/mkbrncmdline
+   mkbrncmdline -i $@ -o $@.new BRN-BOOT
+   mv $@.new $@
+endef
+
+define Build/mkbrnimg
+   mkbrnimg -s $(SIGNATURE) -m $(MAGIC) -p $(CRC32_POLY) -o $@ $(word 1,$^) $(word 2,$^)
+endef
 
 # Shared device definition: applies to every defined device
 define Device/Default
@@ -291,6 +292,13 @@ define Device/lantiqTpLink
   IMAGE/tplink := mktplinkfw2
 endef
 
+define Device/lantiqBrnImage
+  KERNEL := kernel-bin | append-dtb | mkbrncmdline | lzma-no-dict
+  IMAGES := factory.bin
+  IMAGE/factory.bin := mkbrnimg
+endef
+DEVICE_VARS += SIGNATURE MAGIC CRC32_POLY
+
 define lantiqTpLink
   define Device/$(1)
     $$(Device/lantiqTpLink)
@@ -310,6 +318,17 @@ define lantiqImage
   TARGET_DEVICES += $(1)
 endef
 
+define lantiqBrnImage
+  define Device/$(1)
+    $$(Device/lantiqBrnImage)
+    DEVICE_PROFILE := $(1)
+    DEVICE_DTS := $(1)
+    SIGNATURE := $(2)
+    MAGIC := $(3)
+    CRC32_POLY := $(4)
+  endef
+  TARGET_DEVICES += $(1)
+endef
 
 ifeq ($(CONFIG_TARGET_lantiq_falcon),y)
 
@@ -404,14 +423,9 @@ $(eval $(call lantiqTpLink,TDW8970,TD-W8970v1))
 $(eval $(call lantiqTpLink,TDW8980,TD-W8980v1))
 $(eval $(call lantiqTpLink,VR200v,ArcherVR200V))
 $(eval $(call lantiqImage,VGV7510KW22NOR))
-
-Image/BuildKernel/Profile/VGV7510KW22BRN=$(call Image/BuildKernel/Template,VGV7510KW22BRN,$(1))
-Image/Build/Profile/VGV7510KW22BRN=$(call Image/Build/$(1),$(1),VGV7510KW22BRN,BRNDA6431,0x12345678,0x04c11db7,$(1))
-
+$(eval $(call lantiqBrnImage,VGV7510KW22BRN,BRNDA6431,0x12345678,0x04c11db7))
 $(eval $(call lantiqImage,VGV7519NOR))
-
-Image/BuildKernel/Profile/VGV7519BRN=$(call Image/BuildKernel/Template,VGV7519BRN,$(1))
-Image/Build/Profile/VGV7519BRN=$(call Image/Build/$(1),$(1),VGV7519BRN,5D00008000,0x12345678,0x2083b8ed,$(1))
+$(eval $(call lantiqBrnImage,VGV7519BRN,5D00008000,0x12345678,0x2083b8ed))
 
 define Image/Prepare
        $(call Image/Prepare/Profile,$(PROFILE))