ar71xx: rb91x: add SPI device for the serial shift register

The RB91x boards are using a serial shift register
connected to the SPI bus to drive some of the LEDs.

Rework the board setup code to register a SPI device
for that. This makes it possible to use the 'spi-74x164'
driver to control the device.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39703 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
index cb9abf7..0dc2e0f 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
@@ -33,9 +33,9 @@
 #include "common.h"
 #include "dev-eth.h"
 #include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
 #include "dev-nfc.h"
 #include "dev-usb.h"
+#include "dev-spi.h"
 #include "dev-wmac.h"
 #include "machtypes.h"
 #include "pci.h"
@@ -55,6 +55,19 @@
 #define RB91X_LATCH_GPIO_BASE  AR934X_GPIO_COUNT
 #define RB91X_LATCH_GPIO(_x)   (RB91X_LATCH_GPIO_BASE + (_x))
 
+#define RB91X_SSR_GPIO_BASE    (RB91X_LATCH_GPIO_BASE + AR934X_GPIO_COUNT)
+#define RB91X_SSR_GPIO(_x)     (RB91X_SSR_GPIO_BASE + (_x))
+
+#define RB91X_SSR_BIT_LED1             0
+#define RB91X_SSR_BIT_LED2             1
+#define RB91X_SSR_BIT_LED3             2
+#define RB91X_SSR_BIT_LED4             3
+#define RB91X_SSR_BIT_LED5             4
+#define RB91X_SSR_BIT_5                        5
+#define RB91X_SSR_BIT_USB_POWER                6
+#define RB91X_SSR_BIT_PCIE_POWER       7
+
+#define RB91X_GPIO_SSR_STROBE  RB91X_LATCH_GPIO(0)
 #define RB91X_GPIO_NAND_READ   RB91X_LATCH_GPIO(3)
 #define RB91X_GPIO_NAND_RDY    RB91X_LATCH_GPIO(4)
 #define RB91X_GPIO_NLE         RB91X_LATCH_GPIO(11)
@@ -116,6 +129,52 @@ static struct rb91x_nand_platform_data rb711gr100_nand_data __initdata = {
        .gpio_nle = RB91X_GPIO_NLE,
 };
 
+static u8 rb711gr100_ssr_initdata[] __initdata = {
+       BIT(RB91X_SSR_BIT_PCIE_POWER) |
+       BIT(RB91X_SSR_BIT_USB_POWER) |
+       BIT(RB91X_SSR_BIT_5)
+};
+
+static struct gen_74x164_chip_platform_data rb711gr100_ssr_data = {
+       .base = RB91X_SSR_GPIO_BASE,
+       .num_registers = ARRAY_SIZE(rb711gr100_ssr_initdata),
+       .init_data = rb711gr100_ssr_initdata,
+};
+
+static struct ath79_spi_controller_data rb711gr100_spi0_cdata = {
+       .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+       .cs_line = 0,
+       .is_flash = true,
+};
+
+static struct ath79_spi_controller_data rb711gr100_spi1_cdata = {
+       .cs_type = ATH79_SPI_CS_TYPE_GPIO,
+       .cs_line = RB91X_GPIO_SSR_STROBE,
+};
+
+static struct spi_board_info rb711gr100_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "m25p80",
+               .platform_data  = &rb711gr100_spi_flash_data,
+               .controller_data = &rb711gr100_spi0_cdata
+       }, {
+               .bus_num        = 0,
+               .chip_select    = 1,
+               .max_speed_hz   = 10000000,
+               .modalias       = "74x164",
+               .platform_data  = &rb711gr100_ssr_data,
+               .controller_data = &rb711gr100_spi1_cdata
+       }
+};
+
+static struct ath79_spi_platform_data rb711gr100_spi_data __initdata = {
+       .bus_num = 0,
+       .num_chipselect = 2,
+};
+
 static void __init rb711gr100_init_partitions(const struct rb_info *info)
 {
        rb711gr100_spi_partitions[0].size = info->hard_cfg_offs;
@@ -182,7 +241,8 @@ static void __init rb711gr100_setup(void)
        mips_set_machine_name(buf);
 
        rb711gr100_init_partitions(info);
-       ath79_register_m25p80(&rb711gr100_spi_flash_data);
+       ath79_register_spi(&rb711gr100_spi_data, rb711gr100_spi_info,
+                          ARRAY_SIZE(rb711gr100_spi_info));
 
        ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
                                   AR934X_ETH_CFG_SW_ONLY_MODE);

diff --git a/target/linux/ar71xx/patches-3.10/703-MIPS-ath79-add-RB91x-support.patch b/target/linux/ar71xx/patches-3.10/703-MIPS-ath79-add-RB91x-support.patch
index 59679a2..62204a8 100644 (file)
--- a/target/linux/ar71xx/patches-3.10/703-MIPS-ath79-add-RB91x-support.patch
+++ b/target/linux/ar71xx/patches-3.10/703-MIPS-ath79-add-RB91x-support.patch
@@ -18,7 +18,7 @@
 +      bool "MikroTik RouterBOARD 91X support"
 +      select SOC_AR934X
 +      select ATH79_DEV_ETH
-+      select ATH79_DEV_M25P80
++      select ATH79_DEV_SPI
 +      select ATH79_DEV_WMAC
 +      select ATH79_DEV_USB
 +      select ATH79_ROUTERBOOT