ramips: change ethernet napi interrupt sequence

when open device. first ready napi software rx.
then enable hardware interrupt.
final start software tx queue to send data.

Signed-off-by: michael lee <igvtee@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45894 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c
index 60c3c91..bef715b 100644 (file)
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c
@@ -1153,7 +1153,6 @@ static int fe_open(struct net_device *dev)
                goto err_out;
 
        spin_lock_irqsave(&priv->page_lock, flags);
-       napi_enable(&priv->rx_napi);
 
        val = FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN;
        if (priv->flags & FE_FLAG_RX_2B_OFFSET)
@@ -1169,8 +1168,9 @@ static int fe_open(struct net_device *dev)
        if (priv->soc->has_carrier && priv->soc->has_carrier(priv))
                netif_carrier_on(dev);
 
-       netif_start_queue(dev);
+       napi_enable(&priv->rx_napi);
        fe_int_enable(priv->soc->tx_int | priv->soc->rx_int);
+       netif_start_queue(dev);
 
        return 0;
 
@@ -1185,15 +1185,14 @@ static int fe_stop(struct net_device *dev)
        unsigned long flags;
        int i;
 
-       fe_int_disable(priv->soc->tx_int | priv->soc->rx_int);
-
        netif_tx_disable(dev);
+       fe_int_disable(priv->soc->tx_int | priv->soc->rx_int);
+       napi_disable(&priv->rx_napi);
 
        if (priv->phy)
                priv->phy->stop(priv);
 
        spin_lock_irqsave(&priv->page_lock, flags);
-       napi_disable(&priv->rx_napi);
 
        fe_reg_w32(fe_reg_r32(FE_REG_PDMA_GLO_CFG) &
                     ~(FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN),