--- /dev/null
+From 487b997353e2e3afe9c452b20ff5e4320d76e9c3 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Thu, 2 Oct 2014 12:28:54 +0200
+Subject: [PATCH][RFC] bcma: fill core details for every device
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+We were setting things like dma_dev, IRQ, etc. during core registration
+only. We need such info for cores handled internally (e.g. ChipCommon)
+as well.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/bcma/bcma_private.h | 1 +
+ drivers/bcma/main.c | 9 ++++++---
+ drivers/bcma/scan.c | 1 +
+ 3 files changed, 8 insertions(+), 3 deletions(-)
+
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -24,6 +24,7 @@ struct bcma_bus;
+ /* main.c */
+ bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
+ int timeout);
++void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core);
+ int bcma_bus_register(struct bcma_bus *bus);
+ void bcma_bus_unregister(struct bcma_bus *bus);
+ int __init bcma_bus_early_register(struct bcma_bus *bus,
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -169,10 +169,8 @@ static void bcma_of_fill_device(struct p
+ }
+ #endif /* CONFIG_OF */
+
+-static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
++void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
+ {
+- int err;
+-
+ core->dev.release = bcma_release_core_dev;
+ core->dev.bus = &bcma_bus_type;
+ dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
+@@ -196,6 +194,11 @@ static void bcma_register_core(struct bc
+ case BCMA_HOSTTYPE_SDIO:
+ break;
+ }
++}
++
++static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
++{
++ int err;
+
+ err = device_register(&core->dev);
+ if (err) {
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -505,6 +505,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ bus->nr_cores++;
+ other_core = bcma_find_core_reverse(bus, core->id.id);
+ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1;
++ bcma_prepare_core(bus, core);
+
+ bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+ core->core_index, bcma_device_name(&core->id),
--- /dev/null
+From f3bbc921543ad8098617a5a6a8054fab11878a25 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 1 Oct 2014 00:30:37 +0200
+Subject: [PATCH 1/3] bcma: make it possible to specify a IRQ num in
+ bcma_core_irq()
+
+This moves bcma_core_irq() to main.c and add a extra parameter with a
+number so that we can return different irq number for devices with more
+than one.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/driver_chipcommon.c | 2 +-
+ drivers/bcma/driver_gpio.c | 4 ++--
+ drivers/bcma/driver_mips.c | 11 ++---------
+ drivers/bcma/driver_pci_host.c | 4 ++--
+ drivers/bcma/main.c | 22 ++++++++++++++++++++++
+ include/linux/bcma/bcma.h | 2 ++
+ include/linux/bcma/bcma_driver_mips.h | 4 ++--
+ 7 files changed, 33 insertions(+), 16 deletions(-)
+
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -339,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
+ return;
+ }
+
+- irq = bcma_core_irq(cc->core);
++ irq = bcma_core_irq(cc->core, 0);
+
+ /* Determine the registers of the UARTs */
+ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
+--- a/drivers/bcma/driver_gpio.c
++++ b/drivers/bcma/driver_gpio.c
+@@ -152,7 +152,7 @@ static int bcma_gpio_irq_domain_init(str
+ handle_simple_irq);
+ }
+
+- hwirq = bcma_core_irq(cc->core);
++ hwirq = bcma_core_irq(cc->core, 0);
+ err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
+ cc);
+ if (err)
+@@ -183,7 +183,7 @@ static void bcma_gpio_irq_domain_exit(st
+ return;
+
+ bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
+- free_irq(bcma_core_irq(cc->core), cc);
++ free_irq(bcma_core_irq(cc->core, 0), cc);
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_find_mapping(cc->irq_domain, gpio);
+
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -115,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
+ * If disabled, 5 is returned.
+ * If not supported, 6 is returned.
+ */
+-static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ struct bcma_device *mdev = dev->bus->drv_mips.core;
+ u32 irqflag;
+@@ -133,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
+ return 5;
+ }
+
+-unsigned int bcma_core_irq(struct bcma_device *dev)
+-{
+- unsigned int mips_irq = bcma_core_mips_irq(dev);
+- return mips_irq <= 4 ? mips_irq + 2 : 0;
+-}
+-EXPORT_SYMBOL(bcma_core_irq);
+-
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+ unsigned int oldirq = bcma_core_mips_irq(dev);
+@@ -423,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
+ break;
+ default:
+ list_for_each_entry(core, &bus->cores, list) {
+- core->irq = bcma_core_irq(core);
++ core->irq = bcma_core_irq(core, 0);
+ }
+ bcma_err(bus,
+ "Unknown device (0x%x) found, can not configure IRQs\n",
+--- a/drivers/bcma/driver_pci_host.c
++++ b/drivers/bcma/driver_pci_host.c
+@@ -593,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p
+ pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+
+ /* Fix up interrupt lines */
+- dev->irq = bcma_core_irq(pc_host->pdev->core);
++ dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+
+ readrq = pcie_get_readrq(dev);
+@@ -617,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
+
+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+ pci_ops);
+- return bcma_core_irq(pc_host->pdev->core);
++ return bcma_core_irq(pc_host->pdev->core, 0);
+ }
+ EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -169,6 +169,28 @@ static void bcma_of_fill_device(struct p
+ }
+ #endif /* CONFIG_OF */
+
++unsigned int bcma_core_irq(struct bcma_device *core, int num)
++{
++ struct bcma_bus *bus = core->bus;
++ unsigned int mips_irq;
++
++ switch (bus->hosttype) {
++ case BCMA_HOSTTYPE_PCI:
++ return bus->host_pci->irq;
++ case BCMA_HOSTTYPE_SOC:
++ if (bus->drv_mips.core && num == 0) {
++ mips_irq = bcma_core_mips_irq(core);
++ return mips_irq <= 4 ? mips_irq + 2 : 0;
++ }
++ break;
++ case BCMA_HOSTTYPE_SDIO:
++ return 0;
++ }
++
++ return 0;
++}
++EXPORT_SYMBOL(bcma_core_irq);
++
+ void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
+ {
+ core->dev.release = bcma_release_core_dev;
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -447,4 +447,6 @@ extern u32 bcma_chipco_pll_read(struct b
+ #define BCMA_DMA_TRANSLATION_DMA64_CMT 0x80000000 /* Client Mode Translation for 64-bit DMA */
+ extern u32 bcma_core_dma_translation(struct bcma_device *core);
+
++extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
++
+ #endif /* LINUX_BCMA_H_ */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -43,12 +43,12 @@ struct bcma_drv_mips {
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+ extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+
+-extern unsigned int bcma_core_irq(struct bcma_device *core);
++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+ #else
+ static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+ static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
+
+-static inline unsigned int bcma_core_irq(struct bcma_device *core)
++static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ return 0;
+ }
--- /dev/null
+From 4eb6a1fd46965ed6c3fb9327276eb53a3021eaaa Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 9 Jan 2014 19:40:14 +0100
+Subject: [PATCH 3/3] bcma: get IRQ numbers from dt
+
+It is not possible to auto detect the irq numbers used by the cores on
+an arm SoC. If bcma was registered with device tree it will search for
+some device tree nodes with the irq number and add it to the core
+configuration.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ Documentation/devicetree/bindings/bus/bcma.txt | 21 +++++++++++
+ drivers/bcma/main.c | 52 +++++++++++++++++++++++++-
+ 2 files changed, 72 insertions(+), 1 deletion(-)
+
+--- a/Documentation/devicetree/bindings/bus/bcma.txt
++++ b/Documentation/devicetree/bindings/bus/bcma.txt
+@@ -8,6 +8,11 @@ Required properties:
+
+ The cores on the AXI bus are automatically detected by bcma with the
+ memory ranges they are using and they get registered afterwards.
++Automatic detection of the IRQ number is not working on
++BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
++them manually through device tree. Use an interrupt-map to specify the
++IRQ used by the devices on the bus. The first address is just an index,
++because we do not have any special register.
+
+ The top-level axi bus may contain children representing attached cores
+ (devices). This is needed since some hardware details can't be auto
+@@ -22,6 +27,22 @@ Example:
+ ranges = <0x00000000 0x18000000 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0x000fffff 0xffff>;
++ interrupt-map =
++ /* Ethernet Controller 0 */
++ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* Ethernet Controller 1 */
++ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
++
++ /* PCIe Controller 0 */
++ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+
+ chipcommon {
+ reg = <0x00000000 0x1000>;
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -11,6 +11,7 @@
+ #include <linux/bcma/bcma.h>
+ #include <linux/slab.h>
+ #include <linux/of_address.h>
++#include <linux/of_irq.h>
+
+ MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
+ MODULE_LICENSE("GPL");
+@@ -153,6 +154,46 @@ static struct device_node *bcma_of_find_
+ return NULL;
+ }
+
++static int bcma_of_irq_parse(struct platform_device *parent,
++ struct bcma_device *core,
++ struct of_phandle_args *out_irq, int num)
++{
++ __be32 laddr[1];
++ int rc;
++
++ if (core->dev.of_node) {
++ rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
++ if (!rc)
++ return rc;
++ }
++
++ out_irq->np = parent->dev.of_node;
++ out_irq->args_count = 1;
++ out_irq->args[0] = num;
++
++ laddr[0] = cpu_to_be32(core->addr);
++ return of_irq_parse_raw(laddr, out_irq);
++}
++
++static unsigned int bcma_of_get_irq(struct platform_device *parent,
++ struct bcma_device *core, int num)
++{
++ struct of_phandle_args out_irq;
++ int ret;
++
++ if (!parent || !parent->dev.of_node)
++ return 0;
++
++ ret = bcma_of_irq_parse(parent, core, &out_irq, num);
++ if (ret) {
++ bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
++ ret);
++ return 0;
++ }
++
++ return irq_create_of_mapping(&out_irq);
++}
++
+ static void bcma_of_fill_device(struct platform_device *parent,
+ struct bcma_device *core)
+ {
+@@ -161,12 +202,19 @@ static void bcma_of_fill_device(struct p
+ node = bcma_of_find_child_device(parent, core);
+ if (node)
+ core->dev.of_node = node;
++
++ core->irq = bcma_of_get_irq(parent, core, 0);
+ }
+ #else
+ static void bcma_of_fill_device(struct platform_device *parent,
+ struct bcma_device *core)
+ {
+ }
++static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
++ struct bcma_device *core, int num)
++{
++ return 0;
++}
+ #endif /* CONFIG_OF */
+
+ unsigned int bcma_core_irq(struct bcma_device *core, int num)
+@@ -182,7 +230,9 @@ unsigned int bcma_core_irq(struct bcma_d
+ mips_irq = bcma_core_mips_irq(core);
+ return mips_irq <= 4 ? mips_irq + 2 : 0;
+ }
+- break;
++ if (bus->host_pdev)
++ return bcma_of_get_irq(bus->host_pdev, core, num);
++ return 0;
+ case BCMA_HOSTTYPE_SDIO:
+ return 0;
+ }
+++ /dev/null
-From 6611afa6c49434780096cdf2c1028f0ac277f9bc Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 9 Jan 2014 19:40:14 +0100
-Subject: [PATCH v3 2/2] bcma: get IRQ numbers from dt
-
-It is not possible to auto detect the irq numbers used by the cores on
-an arm SoC. If bcma was registered with device tree it will search for
-some device tree nodes with the irq number and add it to the core
-configuration.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/main.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 48 insertions(+), 1 deletion(-)
-
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -10,6 +10,7 @@
- #include <linux/platform_device.h>
- #include <linux/bcma/bcma.h>
- #include <linux/slab.h>
-+#include <linux/of_irq.h>
- #include <linux/of_address.h>
-
- MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
-@@ -159,8 +160,10 @@ static void bcma_of_fill_device(struct p
- struct device_node *node;
-
- node = bcma_of_find_child_device(parent, core);
-- if (node)
-- core->dev.of_node = node;
-+ if (!node)
-+ return;
-+ core->dev.of_node = node;
-+ core->irq = irq_of_parse_and_map(node, 0);
- }
- #else
- static void bcma_of_fill_device(struct platform_device *parent,
+++ /dev/null
-From 487b997353e2e3afe9c452b20ff5e4320d76e9c3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 2 Oct 2014 12:28:54 +0200
-Subject: [PATCH][RFC] bcma: fill core details for every device
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-We were setting things like dma_dev, IRQ, etc. during core registration
-only. We need such info for cores handled internally (e.g. ChipCommon)
-as well.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/bcma/bcma_private.h | 1 +
- drivers/bcma/main.c | 9 ++++++---
- drivers/bcma/scan.c | 1 +
- 3 files changed, 8 insertions(+), 3 deletions(-)
-
---- a/drivers/bcma/bcma_private.h
-+++ b/drivers/bcma/bcma_private.h
-@@ -24,6 +24,7 @@ struct bcma_bus;
- /* main.c */
- bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
- int timeout);
-+void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core);
- int bcma_bus_register(struct bcma_bus *bus);
- void bcma_bus_unregister(struct bcma_bus *bus);
- int __init bcma_bus_early_register(struct bcma_bus *bus,
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -172,10 +172,8 @@ static void bcma_of_fill_device(struct p
- }
- #endif /* CONFIG_OF */
-
--static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
-+void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
- {
-- int err;
--
- core->dev.release = bcma_release_core_dev;
- core->dev.bus = &bcma_bus_type;
- dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
-@@ -199,6 +197,11 @@ static void bcma_register_core(struct bc
- case BCMA_HOSTTYPE_SDIO:
- break;
- }
-+}
-+
-+static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
-+{
-+ int err;
-
- err = device_register(&core->dev);
- if (err) {
---- a/drivers/bcma/scan.c
-+++ b/drivers/bcma/scan.c
-@@ -505,6 +505,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
- bus->nr_cores++;
- other_core = bcma_find_core_reverse(bus, core->id.id);
- core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1;
-+ bcma_prepare_core(bus, core);
-
- bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
- core->core_index, bcma_device_name(&core->id),
projects / openwrt.git / commitdiff