rt2x00: merge an rt2800 initialization order fix
authornbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Mon, 9 Sep 2013 17:31:53 +0000 (17:31 +0000)
committernbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Mon, 9 Sep 2013 17:31:53 +0000 (17:31 +0000)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37922 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/kernel/mac80211/patches/300-pending_work.patch
package/kernel/mac80211/patches/301-pending_work-rt2x00.patch
package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch
package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch
package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch
package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch
package/kernel/mac80211/patches/619-rt2x00-change-led-polarity-from-OF.patch

index ca232a0..de70867 100644 (file)
         *init dbgp flags before all
 --- a/drivers/net/wireless/rtlwifi/ps.c
 +++ b/drivers/net/wireless/rtlwifi/ps.c
-@@ -269,6 +269,7 @@ void rtl_ips_nic_on(struct ieee80211_hw
+@@ -269,6 +269,7 @@ void rtl_ips_nic_on(struct ieee80211_hw 
  
        spin_unlock_irqrestore(&rtlpriv->locks.ips_lock, flags);
  }
index 0d80391..353ef74 100644 (file)
@@ -2727,7 +2727,33 @@ Contains the following changes from wireless-testing/master-2013-08-26:
        case RT5390:
                rt2800_init_rfcsr_5390(rt2x00dev);
                break;
-@@ -5456,15 +6711,15 @@ int rt2800_enable_radio(struct rt2x00_de
+@@ -5404,19 +6659,20 @@ int rt2800_enable_radio(struct rt2x00_de
+                    rt2800_init_registers(rt2x00dev)))
+               return -EIO;
++      if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev)))
++              return -EIO;
++
+       /*
+        * Send signal to firmware during boot time.
+        */
+       rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+       rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+-      if (rt2x00_is_usb(rt2x00dev)) {
++      if (rt2x00_is_usb(rt2x00dev))
+               rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
+-              rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
+-      }
++      rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
+       msleep(1);
+-      if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev) ||
+-                   rt2800_wait_bbp_ready(rt2x00dev)))
++      if (unlikely(rt2800_wait_bbp_ready(rt2x00dev)))
+               return -EIO;
+       rt2800_init_bbp(rt2x00dev);
+@@ -5456,15 +6712,15 @@ int rt2800_enable_radio(struct rt2x00_de
        /*
         * Initialize LED control
         */
@@ -2746,7 +2772,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
        rt2800_mcu_request(rt2x00dev, MCU_LED_LED_POLARITY, 0xff,
                           word & 0xff, (word >> 8) & 0xff);
  
-@@ -5560,6 +6815,34 @@ int rt2800_read_eeprom_efuse(struct rt2x
+@@ -5560,6 +6816,34 @@ int rt2800_read_eeprom_efuse(struct rt2x
  }
  EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse);
  
@@ -2781,7 +2807,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
  static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
  {
        struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
-@@ -5578,18 +6861,18 @@ static int rt2800_validate_eeprom(struct
+@@ -5578,18 +6862,18 @@ static int rt2800_validate_eeprom(struct
        /*
         * Start validation of the data that has been read.
         */
@@ -2803,7 +2829,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
                rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word);
        } else if (rt2x00_rt(rt2x00dev, RT2860) ||
                   rt2x00_rt(rt2x00dev, RT2872)) {
-@@ -5598,10 +6881,10 @@ static int rt2800_validate_eeprom(struct
+@@ -5598,10 +6882,10 @@ static int rt2800_validate_eeprom(struct
                 */
                if (rt2x00_get_field16(word, EEPROM_NIC_CONF0_RXPATH) > 2)
                        rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2);
@@ -2816,7 +2842,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
        if (word == 0xffff) {
                rt2x00_set_field16(&word, EEPROM_NIC_CONF1_HW_RADIO, 0);
                rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC, 0);
-@@ -5618,24 +6901,24 @@ static int rt2800_validate_eeprom(struct
+@@ -5618,24 +6902,24 @@ static int rt2800_validate_eeprom(struct
                rt2x00_set_field16(&word, EEPROM_NIC_CONF1_INTERNAL_TX_ALC, 0);
                rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BT_COEXIST, 0);
                rt2x00_set_field16(&word, EEPROM_NIC_CONF1_DAC_TEST, 0);
@@ -2848,7 +2874,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
                rt2x00_eeprom_dbg(rt2x00dev, "Led Mode: 0x%04x\n", word);
        }
  
-@@ -5644,56 +6927,61 @@ static int rt2800_validate_eeprom(struct
+@@ -5644,56 +6928,61 @@ static int rt2800_validate_eeprom(struct
         * lna0 as correct value. Note that EEPROM_LNA
         * is never validated.
         */
@@ -2941,7 +2967,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
  
        return 0;
  }
-@@ -5707,7 +6995,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -5707,7 +6996,7 @@ static int rt2800_init_eeprom(struct rt2
        /*
         * Read EEPROM word for configuration.
         */
@@ -2950,7 +2976,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
  
        /*
         * Identify RF chipset by EEPROM value
-@@ -5717,7 +7005,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -5717,7 +7006,7 @@ static int rt2800_init_eeprom(struct rt2
        if (rt2x00_rt(rt2x00dev, RT3290) ||
            rt2x00_rt(rt2x00dev, RT5390) ||
            rt2x00_rt(rt2x00dev, RT5392))
@@ -2959,7 +2985,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
        else
                rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
  
-@@ -5731,6 +7019,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -5731,6 +7020,7 @@ static int rt2800_init_eeprom(struct rt2
        case RF3021:
        case RF3022:
        case RF3052:
@@ -2967,7 +2993,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
        case RF3290:
        case RF3320:
        case RF3322:
-@@ -5757,7 +7046,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -5757,7 +7047,7 @@ static int rt2800_init_eeprom(struct rt2
        rt2x00dev->default_ant.rx_chain_num =
            rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH);
  
@@ -2976,7 +3002,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
  
        if (rt2x00_rt(rt2x00dev, RT3070) ||
            rt2x00_rt(rt2x00dev, RT3090) ||
-@@ -5810,7 +7099,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -5810,7 +7100,7 @@ static int rt2800_init_eeprom(struct rt2
        /*
         * Read frequency offset and RF programming sequence.
         */
@@ -2985,7 +3011,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
        rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
  
        /*
-@@ -5827,7 +7116,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -5827,7 +7117,7 @@ static int rt2800_init_eeprom(struct rt2
        /*
         * Check if support EIRP tx power limit feature.
         */
@@ -2994,7 +3020,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
  
        if (rt2x00_get_field16(eeprom, EEPROM_EIRP_MAX_TX_POWER_2GHZ) <
                                        EIRP_MAX_TX_POWER_LIMIT)
-@@ -6109,12 +7398,79 @@ static const struct rf_channel rf_vals_5
+@@ -6109,12 +7399,79 @@ static const struct rf_channel rf_vals_5
        {196, 83, 0, 12, 1},
  };
  
@@ -3074,7 +3100,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
        unsigned int i;
        u16 eeprom;
        u32 reg;
-@@ -6149,7 +7505,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -6149,7 +7506,7 @@ static int rt2800_probe_hw_mode(struct r
  
        SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
        SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
@@ -3083,7 +3109,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
                                                   EEPROM_MAC_ADDR_0));
  
        /*
-@@ -6165,7 +7521,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -6165,7 +7522,7 @@ static int rt2800_probe_hw_mode(struct r
        rt2x00dev->hw->max_report_rates = 7;
        rt2x00dev->hw->max_rate_tries = 1;
  
@@ -3092,7 +3118,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
  
        /*
         * Initialize hw_mode information.
-@@ -6200,6 +7556,10 @@ static int rt2800_probe_hw_mode(struct r
+@@ -6200,6 +7557,10 @@ static int rt2800_probe_hw_mode(struct r
                spec->supported_bands |= SUPPORT_BAND_5GHZ;
                spec->num_channels = ARRAY_SIZE(rf_vals_3x);
                spec->channels = rf_vals_3x;
@@ -3103,7 +3129,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
        } else if (rt2x00_rf(rt2x00dev, RF5592)) {
                spec->supported_bands |= SUPPORT_BAND_5GHZ;
  
-@@ -6265,21 +7625,40 @@ static int rt2800_probe_hw_mode(struct r
+@@ -6265,21 +7626,40 @@ static int rt2800_probe_hw_mode(struct r
  
        spec->channels_info = info;
  
@@ -3148,7 +3174,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
                }
        }
  
-@@ -6290,6 +7669,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -6290,6 +7670,7 @@ static int rt2800_probe_hw_mode(struct r
        case RF3022:
        case RF3320:
        case RF3052:
@@ -3156,7 +3182,7 @@ Contains the following changes from wireless-testing/master-2013-08-26:
        case RF3290:
        case RF5360:
        case RF5370:
-@@ -6328,6 +7708,7 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -6328,6 +7709,7 @@ static int rt2800_probe_rt(struct rt2x00
        case RT3352:
        case RT3390:
        case RT3572:
index e2cd4d0..c0829d7 100644 (file)
        rt2800_rfcsr_write(rt2x00dev, 59, 0x00);
        rt2800_rfcsr_write(rt2x00dev, 60, 0x00);
        rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
-@@ -7003,6 +7029,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7004,6 +7030,7 @@ static int rt2800_init_eeprom(struct rt2
         * RT53xx: defined in "EEPROM_CHIP_ID" field
         */
        if (rt2x00_rt(rt2x00dev, RT3290) ||
            rt2x00_rt(rt2x00dev, RT5390) ||
            rt2x00_rt(rt2x00dev, RT5392))
                rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
-@@ -7093,7 +7120,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7094,7 +7121,8 @@ static int rt2800_init_eeprom(struct rt2
        /*
         * Detect if this device has Bluetooth co-existence.
         */
                __set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags);
  
        /*
-@@ -7122,6 +7150,22 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7123,6 +7151,22 @@ static int rt2800_init_eeprom(struct rt2
                                        EIRP_MAX_TX_POWER_LIMIT)
                __set_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags);
  
index 4fc1e0a..212b31e 100644 (file)
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7508,6 +7508,27 @@ static const struct rf_channel rf_vals_3
+@@ -7509,6 +7509,27 @@ static const struct rf_channel rf_vals_3
        {173, 0x61, 0, 9},
  };
  
@@ -28,7 +28,7 @@
  static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
  {
        struct hw_mode_spec *spec = &rt2x00dev->spec;
-@@ -7588,7 +7609,6 @@ static int rt2800_probe_hw_mode(struct r
+@@ -7589,7 +7610,6 @@ static int rt2800_probe_hw_mode(struct r
                   rt2x00_rf(rt2x00dev, RF3022) ||
                   rt2x00_rf(rt2x00dev, RF3290) ||
                   rt2x00_rf(rt2x00dev, RF3320) ||
@@ -36,7 +36,7 @@
                   rt2x00_rf(rt2x00dev, RF5360) ||
                   rt2x00_rf(rt2x00dev, RF5370) ||
                   rt2x00_rf(rt2x00dev, RF5372) ||
-@@ -7596,6 +7616,12 @@ static int rt2800_probe_hw_mode(struct r
+@@ -7597,6 +7617,12 @@ static int rt2800_probe_hw_mode(struct r
                   rt2x00_rf(rt2x00dev, RF5392)) {
                spec->num_channels = 14;
                spec->channels = rf_vals_3x;
@@ -49,7 +49,7 @@
        } else if (rt2x00_rf(rt2x00dev, RF3052)) {
                spec->supported_bands |= SUPPORT_BAND_5GHZ;
                spec->num_channels = ARRAY_SIZE(rf_vals_3x);
-@@ -7768,6 +7794,19 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -7769,6 +7795,19 @@ static int rt2800_probe_rt(struct rt2x00
        return 0;
  }
  
@@ -69,7 +69,7 @@
  int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
  {
        int retval;
-@@ -7797,6 +7836,15 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -7798,6 +7837,15 @@ int rt2800_probe_hw(struct rt2x00_dev *r
        rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
  
        /*
index 1110394..1873b62 100644 (file)
@@ -8,7 +8,7 @@
  
  #include "rt2x00.h"
  #include "rt2800lib.h"
-@@ -7796,13 +7797,14 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -7797,13 +7798,14 @@ static int rt2800_probe_rt(struct rt2x00
  
  int rt2800_probe_clk(struct rt2x00_dev *rt2x00dev)
  {
index 223d46a..6acc70e 100644 (file)
        case RT5390:
                rt2800_init_rfcsr_5390(rt2x00dev);
                break;
-@@ -6901,6 +7005,12 @@ static int rt2800_validate_eeprom(struct
+@@ -6902,6 +7006,12 @@ static int rt2800_validate_eeprom(struct
                rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RF_TYPE, RF2820);
                rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
                rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word);
        } else if (rt2x00_rt(rt2x00dev, RT2860) ||
                   rt2x00_rt(rt2x00dev, RT2872)) {
                /*
-@@ -7034,6 +7144,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7035,6 +7145,8 @@ static int rt2800_init_eeprom(struct rt2
            rt2x00_rt(rt2x00dev, RT5390) ||
            rt2x00_rt(rt2x00dev, RT5392))
                rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
        else
                rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
  
-@@ -7051,6 +7163,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7052,6 +7164,7 @@ static int rt2800_init_eeprom(struct rt2
        case RF3290:
        case RF3320:
        case RF3322:
        case RF5360:
        case RF5370:
        case RF5372:
-@@ -7617,7 +7730,8 @@ static int rt2800_probe_hw_mode(struct r
+@@ -7618,7 +7731,8 @@ static int rt2800_probe_hw_mode(struct r
                   rt2x00_rf(rt2x00dev, RF5392)) {
                spec->num_channels = 14;
                spec->channels = rf_vals_3x;
                spec->num_channels = 14;
                if (spec->clk_is_20mhz)
                        spec->channels = rf_vals_xtal20mhz_3x;
-@@ -7742,6 +7856,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -7743,6 +7857,7 @@ static int rt2800_probe_hw_mode(struct r
        case RF3052:
        case RF3053:
        case RF3290:
        case RF5360:
        case RF5370:
        case RF5372:
-@@ -7780,6 +7895,7 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -7781,6 +7896,7 @@ static int rt2800_probe_rt(struct rt2x00
        case RT3390:
        case RT3572:
        case RT3593:
index 05d5f11..a81d6c9 100644 (file)
@@ -8,7 +8,7 @@
  
  #include "rt2x00.h"
  #include "rt2800lib.h"
-@@ -7252,6 +7253,17 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7253,6 +7254,17 @@ static int rt2800_init_eeprom(struct rt2
        rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
        rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);