D-Link DAP-1350; Avoid bricking esw config

This is a patch to connect eth0.1 (lan) to the only
ethernet connector available.

D-Link DAP-1350 goes bricked with AA 12.09-beta.

This is because the current esw configuration for the
board connects eth0.2 (wan) to the *ONE and ONLY*
ethernet connector available, preventing initial access
to the board through 192.168.1.1 on eth0.1 after flashing,
effectively bricking the board.

There are things that should be done to make this board
really useful, but for AA 12.09, this one liner is
indispensable.

Signed of by Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33411 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dap-1350.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dap-1350.c
index cd5d6ae..42d3ebe 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dap-1350.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dap-1350.c
@@ -79,7 +79,7 @@ static void __init dap_1350_init(void)
 
        rt305x_register_flash(0);
 
-       rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
+       rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
        rt305x_register_ethernet();
        ramips_register_gpio_leds(-1, ARRAY_SIZE(dap_1350_leds_gpio),
                                  dap_1350_leds_gpio);