[lantiq] cleanup basefiles

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34698 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/lantiq/base-files/etc/diag.sh b/target/linux/lantiq/base-files/etc/diag.sh
new file mode 100644 (file)
index 0000000..d0088f5
--- /dev/null
+++ b/target/linux/lantiq/base-files/etc/diag.sh
@@ -0,0 +1,42 @@
+#!/bin/sh
+# Copyright (C) 2012 OpenWrt.org
+
+[ -d /sys/class/leds/power/ ] || return
+
+set_state() {
+       [ -d /sys/class/leds/power1/ ] && {
+
+               case "$1" in
+               preinit)
+                       echo heartbeat >/sys/class/leds/power/trigger
+                       ;;
+               failsafe)
+                       echo none >/sys/class/leds/power/trigger
+                       echo timer >/sys/class/leds/power1/trigger
+                       echo 100 >/sys/class/leds/power1/delay_on
+                       echo 100 >/sys/class/leds/power1/delay_off
+                       ;;
+               done)
+                       echo none >/sys/class/leds/power/trigger
+                       echo none >/sys/class/leds/power1/trigger
+                       echo 1 >/sys/class/leds/power/brightness
+                       ;;
+               esac
+               return
+       }
+
+       case "$1" in
+       preinit)
+               echo heartbeat >/sys/class/leds/power/trigger
+               ;;
+       failsafe)
+               echo timer >/sys/class/leds/power/trigger
+               echo 100 >/sys/class/leds/power/delay_on
+               echo 100 >/sys/class/leds/power/delay_off
+               ;;
+       done)
+               echo none >/sys/class/leds/power/trigger
+               echo 1 >/sys/class/leds/power/brightness
+               ;;
+       esac
+}

diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/button/10-generic.sh b/target/linux/lantiq/base-files/etc/hotplug.d/button/10-generic.sh
index b2fdda2..1d1467a 100644 (file)
--- a/target/linux/lantiq/base-files/etc/hotplug.d/button/10-generic.sh
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/button/10-generic.sh
@@ -7,11 +7,14 @@
 case "${BUTTON}" in
        BTN_0)
                logger "reset pressed"
+               echo "REBOOT" > /dev/console
+               sleep 3
                sync
                reboot
                ;;
        BTN_1)
                logger "factory pressed"
+               echo "FACTORY RESET" > /dev/console
                jffs2_mark_erase "rootfs_data"
                sync
                reboot

diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 1eee55e..e58ca34 100644 (file)
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -23,12 +23,11 @@ rt2x00_eeprom_extract() {
 }
 
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/lantiq.sh
+. /lib/functions/lantiq.sh
 
 case "$FIRMWARE" in
 "RT2860.eeprom" )
-       local board=$(lantiq_board_name)
+       local board=$(lantiq_board_id)
        case $board in
        ARV7525PW|ARV752DPW)
                rt2x00_eeprom_extract "board_config" 1040 272

diff --git a/target/linux/lantiq/base-files/etc/inittab b/target/linux/lantiq/base-files/etc/inittab
index 96afec9..46a1312 100644 (file)
--- a/target/linux/lantiq/base-files/etc/inittab
+++ b/target/linux/lantiq/base-files/etc/inittab
@@ -1,4 +1,3 @@
 ::sysinit:/etc/init.d/rcS S boot
 ::shutdown:/etc/init.d/rcS K stop
 ttyLTQ0::askfirst:/bin/ash --login
-ttyLTQ1::askfirst:/bin/ash --login

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/leds b/target/linux/lantiq/base-files/etc/uci-defaults/leds
index 64b080f..747a715 100755 (executable)
--- a/target/linux/lantiq/base-files/etc/uci-defaults/leds
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/leds
@@ -5,51 +5,21 @@
 #
 
 . /lib/functions/uci-defaults.sh
-. /lib/lantiq.sh
+. /lib/functions/lantiq.sh
 
-board=$(lantiq_board_name)
+[ -e "/sys/class/leds/wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "wifi" "phy0tx"
+[ -e "/sys/class/leds/usb" ] && ucidef_set_led_usbdev "usb" "usb" "usb" "1-1"
+[ -e "/sys/class/leds/dsl" ] &&        ucidef_set_led_netdev "dsl" "dsl" "dsl" "pppoe-wan"
 
-case "$board" in
-ARV4520PW|ARV452CPW)
-       ucidef_set_led_netdev "wifi" "wifi" "soc:blue:wifi" "wlan0"
-       ucidef_set_led_usbdev "usb" "USB" "soc:blue:usb" "1-1"
-       ucidef_set_led_default "fxs1" "fxs1" "soc:blue:fxs1" "1"
-       ucidef_set_led_default "fxs2" "fxs2" "soc:blue:fxs2" "1"
-       ucidef_set_led_default "online" "online" "soc:blue:internet" "1"
-       ;;
-
-ARV7525PW)
-       ucidef_set_led_netdev "wifi" "wifi" "soc:green:wifi" "wlan0"
-       ucidef_set_led_default "fxs1" "fxs1" "soc:green:fxs1" "1"
-       ucidef_set_led_default "fxs2" "fxs2" "soc:green:fxs2" "1"
-       ucidef_set_led_default "dsl" "dsl" "soc:red:dsl" "1"
-       ucidef_set_led_default "online" "online" "soc:green:online" "1"
-       ;;
-
-ARV4525PW)
-       ucidef_set_led_netdev "wifi" "wifi" "soc:green:wifi" "wlan0"
-       ucidef_set_led_default "fxs1" "fxs1" "soc:green:fxs1" "1"
-       ucidef_set_led_default "fxs2" "fxs2" "soc:green:fxs2" "1"
-       ucidef_set_led_default "dsl" "dsl" "soc:green:dsl" "1"
-       ucidef_set_led_default "online" "online" "soc:green:online" "1"
-       ;;
+for a in `ls /sys/class/leds/`; do
+       grep -q "\[none\]" /sys/class/leds/$a/trigger
+       [ $? -eq 0 ] && ucidef_set_led_default $a $a $a `cat /sys/class/leds/$a/brightness`
+done
 
-GIGASX76X)
-       ucidef_set_led_wlan "wifi" "wifi" "soc:green:wifi" "phy0radio"
-       ucidef_set_led_netdev "online" "online" "soc:green:online" "pppoe-wan"
-       ucidef_set_led_usbdev "usb" "USB" "soc:green:usb" "1-1"
-       ;;
+board=$(lantiq_board_id)
 
-ARV4519PW)
-       ucidef_set_led_wlan "wifi" "wifi" "soc:green:wifi" "phy0radio"
-       ucidef_set_led_netdev "internet" "internet" "soc:green:internet" "pppoe-wan"
-       ucidef_set_led_usbdev "usb" "USB" "soc:green:usb" "1-1"
-       ;;
-
-ARV7518PW)
-       ucidef_set_led_wlan "wifi" "wifi" "soc:green:wifi" "phy0radio"
-       ucidef_set_led_netdev "internet" "internet" "soc:green:internet" "pppoe-wan"
-       ucidef_set_led_usbdev "usb" "USB" "soc:green:usb" "1-1"
+case "$board" in
+*)
        ;;
 esac
 

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/network b/target/linux/lantiq/base-files/etc/uci-defaults/network
index b40134d..e1459b9 100755 (executable)
--- a/target/linux/lantiq/base-files/etc/uci-defaults/network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/network
@@ -12,7 +12,6 @@ set_atm_wan() {
        local payload=$4
        uci batch <<EOF
 set network.atm='atm-bridge'
-set network.atm.unit='0'
 set network.atm.vpi='$vpi'
 set network.atm.vci='$vci'
 set network.atm.encaps='$encaps'
@@ -25,18 +24,8 @@ set network.wan.password='bar'
 EOF
 }
 
-set_adsl() {
-       local fwannex=$1
-       local annex=$2
-       uci batch <<EOF
-set network.adsl='adsl-device'
-set network.adsl.fwannex='$fwannex'
-set network.adsl.annex='$annex'
-EOF
-}
-
 . /lib/functions/uci-defaults.sh
-. /lib/lantiq.sh
+. /lib/functions/lantiq.sh
 
 touch /etc/config/network
 
@@ -47,40 +36,33 @@ vpi=1
 vci=32
 encaps="llc"
 payload="bridged"
-fwannex=$(lantiq_dsl_fwannex)
-board=$(lantiq_board_name)
-dsl=$(lantiq_soc_has_adsl)
+
+board=$(lantiq_board_id)
 
 case "$board" in
-# annex B with adm6996
+# adm6996
 ARV4520PW)
        ucidef_set_interface_lan "eth0.1"
        ucidef_add_switch "eth0" "1" "1"
        ucidef_add_switch_vlan "eth0" "1" "3 2 1 0 5t"
-       set_adsl "b" "b2p"
        ;;
 
 GIGASX76X)
        ucidef_set_interface_lan "eth0.1"
        ucidef_add_switch "eth0" "1" "1"
        ucidef_add_switch_vlan "eth0" "1" "4 3 2 1 5t"
-       set_adsl "b" "b2p"
        ;;
 
-# annex A with ar8316
+# ar8316
 ARV4519PW|ARV7518PW)
        ucidef_set_interface_lan "eth0.1"
        ucidef_add_switch "eth0" "1" "1"
        ucidef_add_switch_vlan "eth0" "1" "0t 2 3 4 5"
-       set_adsl "a" "a2p"
-       ;;
-
-ARV7525PW|ARV4525PW|*)
-       set_adsl "$fwannex" "${fwannex}2p"
        ;;
 esac
 
-[ -z "$dsl" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
+[ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
+
 
 uci commit network
 

diff --git a/target/linux/lantiq/base-files/lib/functions/lantiq.sh b/target/linux/lantiq/base-files/lib/functions/lantiq.sh
new file mode 100644 (file)
index 0000000..ca52d08
--- /dev/null
+++ b/target/linux/lantiq/base-files/lib/functions/lantiq.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+lantiq_board_id() {
+       grep "^system type" /proc/cpuinfo | sed "s/system type.*: \(.*\)/\1/g" | sed "s/.* - \(.*\) - .*/\1/g"
+}
+
+lantiq_board_name() {
+       grep "^system type" /proc/cpuinfo | sed "s/system type.*: \(.*\)/\1/g" | sed "s/.* - \(.*\)/\1/g"
+}

diff --git a/target/linux/lantiq/base-files/lib/lantiq.sh b/target/linux/lantiq/base-files/lib/lantiq.sh
deleted file mode 100644 (file)
index e4f1471..0000000
--- a/target/linux/lantiq/base-files/lib/lantiq.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-lantiq_soc_has_adsl() {
-       ls /lib/modules/*/drv_dsl_cpe_api.ko
-}
-
-lantiq_soc_name() {
-       grep ^system /proc/cpuinfo | sed "s/system type.*: \(.*\)/\1/g"
-}
-
-lantiq_board_name() {
-       grep ^machine /proc/cpuinfo | sed "s/machine.*: \(.*\)/\1/g" | sed "s/\(.*\) - .*/\1/g"
-}
-
-lantiq_dsl_fwannex() {
-       ls /lib/firmware/dsl-fw-*.bin 2> /dev/null | sed "s/.*\([ab]\)\.bin/\1/g"
-}

diff --git a/target/linux/lantiq/base-files/lib/preinit/42_athfix b/target/linux/lantiq/base-files/lib/preinit/42_athfix
index 114aaff..d182fbf 100644 (file)
--- a/target/linux/lantiq/base-files/lib/preinit/42_athfix
+++ b/target/linux/lantiq/base-files/lib/preinit/42_athfix
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-. /lib/lantiq.sh
+. /lib/functions/lantiq.sh
 
 init_atheeprom() {
        local board=$(lantiq_board_name)