ar71xx: fix ap152 support

- ethernet gigabit pll
- switch configuration
- sysupgrade

Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48187 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 6b6c6a4..190b693 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -23,6 +23,7 @@ ubnt-unifi-outdoor)
        ;;
 
 ap132 |\
+ap152 |\
 wlr8100)
        ucidef_add_switch "switch0" \
                "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"

diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index e662524..1f6eaf2 100755 (executable)
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -184,6 +184,7 @@ platform_check_image() {
        ap136-020 | \
        ap135-020 | \
        ap147-010 | \
+       ap152 | \
        ap96 | \
        bxu2000n-2-a1 | \
        db120 | \

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c
index a1eb06b..e669325 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c
@@ -132,7 +132,6 @@ static void __init ap152_setup(void)
        ath79_eth0_data.duplex = DUPLEX_FULL;
        ath79_eth0_data.phy_mask = BIT(0);
        ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-       ath79_eth0_pll_data.pll_1000 = 0x06000000;
 
        ath79_register_eth(0);
 }