[cns3xxx]: split the i2c patch, merge the retry fixup
authorkaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Mon, 12 Nov 2012 08:21:38 +0000 (08:21 +0000)
committerkaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Mon, 12 Nov 2012 08:21:38 +0000 (08:21 +0000)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34167 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/cns3xxx/files/drivers/i2c/busses/i2c-cns3xxx.c [new file with mode: 0644]
target/linux/cns3xxx/patches-3.3/050-cns3xxx_i2c_controller.patch
target/linux/cns3xxx/patches-3.3/440-i2c_retry.patch [deleted file]

diff --git a/target/linux/cns3xxx/files/drivers/i2c/busses/i2c-cns3xxx.c b/target/linux/cns3xxx/files/drivers/i2c/busses/i2c-cns3xxx.c
new file mode 100644 (file)
index 0000000..f578eac
--- /dev/null
@@ -0,0 +1,396 @@
+/*
+ * Cavium CNS3xxx I2C Host Controller
+ *
+ * Copyright 2010 Cavium Network
+ * Copyright 2012 Gateworks Corporation
+ *               Chris Lang <clang@gateworks.com>
+ *               Tim Harvey <tharvey@gateworks.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <mach/pm.h>
+#include <mach/cns3xxx.h>
+
+/*
+ * We need the memory map
+ */
+
+
+#define MISC_MEM_MAP_VALUE(reg_offset) (*((uint32_t volatile *)(CNS3XXX_MISC_BASE_VIRT + reg_offset)))
+#define MISC_IOCDB_CTRL                                MISC_MEM_MAP_VALUE(0x020)
+
+#define I2C_MEM_MAP_ADDR(x)         (CNS3XXX_SSP_BASE_VIRT + x)
+#define I2C_MEM_MAP_VALUE(x)        (*((unsigned int volatile*)I2C_MEM_MAP_ADDR(x)))
+
+#define I2C_CONTROLLER_REG                    I2C_MEM_MAP_VALUE(0x20)
+#define I2C_TIME_OUT_REG                      I2C_MEM_MAP_VALUE(0x24)
+#define I2C_SLAVE_ADDRESS_REG                 I2C_MEM_MAP_VALUE(0x28)
+#define I2C_WRITE_DATA_REG                    I2C_MEM_MAP_VALUE(0x2C)
+#define I2C_READ_DATA_REG                     I2C_MEM_MAP_VALUE(0x30)
+#define I2C_INTERRUPT_STATUS_REG              I2C_MEM_MAP_VALUE(0x34)
+#define I2C_INTERRUPT_ENABLE_REG              I2C_MEM_MAP_VALUE(0x38)
+#define I2C_TWI_OUT_DLY_REG                                                    I2C_MEM_MAP_VALUE(0x3C)
+
+#define I2C_BUS_ERROR_FLAG     (0x1)
+#define I2C_ACTION_DONE_FLAG   (0x2)
+
+#define CNS3xxx_I2C_ENABLE()          (I2C_CONTROLLER_REG) |= ((unsigned int)0x1 << 31)
+#define CNS3xxx_I2C_DISABLE()         (I2C_CONTROLLER_REG) &= ~((unsigned int)0x1 << 31)
+#define CNS3xxx_I2C_ENABLE_INTR()     (I2C_INTERRUPT_ENABLE_REG) |= 0x03
+#define CNS3xxx_I2C_DISABLE_INTR()    (I2C_INTERRUPT_ENABLE_REG) &= 0xfc
+
+#define TWI_TIMEOUT         (10*HZ)
+#define I2C_100KHZ          100000
+#define I2C_200KHZ          200000
+#define I2C_300KHZ          300000
+#define I2C_400KHZ          400000
+
+#define CNS3xxx_I2C_CLK     I2C_100KHZ
+
+#define STATE_DONE             1
+#define STATE_ERROR            2
+
+struct cns3xxx_i2c {
+       struct device           *dev;
+       void __iomem            *base;          /* virtual */
+       wait_queue_head_t       wait;
+       struct i2c_adapter      adap;
+       struct i2c_msg          *msg;
+       u8                      state;          /* see STATE_ */
+       u8                      error;          /* see TWI_STATUS register */
+       int                     rd_wr_len;
+       u8                      *buf;
+};
+
+static u32 cns3xxx_i2c_func(struct i2c_adapter *adap)
+{
+       return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static int
+cns3xxx_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg)
+{
+       struct cns3xxx_i2c *i2c = i2c_get_adapdata(adap);
+       int i, j;
+       u8 buf[1] = { 0 };
+
+       if (msg->len == 0) {
+               /*
+                *      We are probably doing a probe for a device here,
+                *      so set the length to one, and data to 0
+                */
+               msg->len = 1;
+               i2c->buf = buf;
+       } else {
+               i2c->buf = msg->buf;
+       }
+
+       if (msg->flags & I2C_M_TEN) {
+               printk
+                       ("%s:%d: Presently the driver does not handle extended addressing\n",
+                               __FUNCTION__, __LINE__);
+               return -EINVAL;
+       }
+       i2c->msg = msg;
+
+       for (i = 0; i < msg->len; i++) {
+               if (msg->len - i >= 4)
+                       i2c->rd_wr_len = 3;
+               else
+                       i2c->rd_wr_len = msg->len - i - 1;
+
+               // Set Data Width       and TWI_EN
+               I2C_CONTROLLER_REG = 0x80000000 | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
+
+               // Clear Write Reg
+               I2C_WRITE_DATA_REG = 0;
+
+               // Set the slave address
+               I2C_SLAVE_ADDRESS_REG = (msg->addr << 1);
+
+               // Are we Writing
+               if (!(msg->flags & I2C_M_RD)) {
+                       I2C_CONTROLLER_REG |= (1 << 4);
+                       if (i != 0) {
+                               /*
+                                * We need to set the address in the first byte.
+                                * The base address is going to be in buf[0] and then
+                                * it needs to be incremented by i - 1.
+                                */
+                               i2c->buf--;
+                               *i2c->buf = buf[0] + i - 1;
+
+                               if (i2c->rd_wr_len < 3) {
+                                       i += i2c->rd_wr_len;
+                                       i2c->rd_wr_len++;
+                                       I2C_CONTROLLER_REG = 0x80000000 | (1 << 4) | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
+                               } else {
+                                       i += i2c->rd_wr_len - 1;
+                               }
+                       } else {
+                               i += i2c->rd_wr_len;
+                               buf[0] = *i2c->buf;
+                       }
+                       for (j = 0; j <= i2c->rd_wr_len; j++) {
+                               I2C_WRITE_DATA_REG |= ((*i2c->buf++) << (8 * j));
+                       }
+               } else {
+                       i += i2c->rd_wr_len;
+               }
+
+               // Start the Transfer
+               i2c->state = 0;         // Clear out the State
+               i2c->error = 0;
+               I2C_CONTROLLER_REG |= (1 << 6);
+
+               if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
+                               (i2c->state == STATE_DONE), TWI_TIMEOUT)) {
+                       if (i2c->state == STATE_ERROR) {
+                               dev_dbg(i2c->dev, "controller error: 0x%2x", i2c->error);
+                               return -EAGAIN; // try again
+                       }
+               } else {
+                       dev_err(i2c->dev, "controller timed out "
+                               "waiting for start condition to finish\n");
+                       return -ETIMEDOUT;
+               }
+       }
+       return 0;
+}
+
+static int
+cns3xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+       int i;
+       int ret;
+       for (i = 0; i < num; i++)
+       {
+               ret = cns3xxx_i2c_xfer_msg(adap, &msgs[i]);
+               if (ret < 0) {
+                       return ret;
+               }
+       }
+       return num;
+}
+
+
+static struct i2c_algorithm cns3xxx_i2c_algo = {
+       .master_xfer = cns3xxx_i2c_xfer,
+       .functionality = cns3xxx_i2c_func,
+};
+
+static struct i2c_adapter cns3xxx_i2c_adapter = {
+       .owner = THIS_MODULE,
+       .algo = &cns3xxx_i2c_algo,
+       .algo_data = NULL,
+       .nr = 0,
+       .name = "CNS3xxx I2C 0",
+       .retries = 5,
+};
+
+static void cns3xxx_i2c_adapter_init(struct cns3xxx_i2c *i2c)
+{
+        cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
+        cns3xxx_pwr_power_up(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
+        cns3xxx_pwr_soft_rst(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
+
+       /* Disable the I2C */
+       I2C_CONTROLLER_REG = 0; /* Disabled the I2C */
+
+       //enable SCL and SDA which share pin with GPIOB_PIN_EN(0x18)
+       //GPIOB[12]: SCL
+       //GPIOB[13]: SDA
+       (*(u32*)(CNS3XXX_MISC_BASE_VIRT+0x18)) |= ((1<<12)|(1<<13));
+
+       MISC_IOCDB_CTRL &= ~0x300;
+       MISC_IOCDB_CTRL |= 0x300; //21mA...
+
+       /* Check the Reg Dump when testing */
+       I2C_TIME_OUT_REG =
+           ((((((cns3xxx_cpu_clock()*(1000000/8)) / (2 * CNS3xxx_I2C_CLK)) -
+               1) & 0x3FF) << 8) | (1 << 7) | 0x7F);
+       I2C_TWI_OUT_DLY_REG |= 0x3;
+
+       /* Enable The Interrupt */
+       CNS3xxx_I2C_ENABLE_INTR();
+
+       /* Clear Interrupt Status (0x2 | 0x1) */
+       I2C_INTERRUPT_STATUS_REG |= (I2C_ACTION_DONE_FLAG | I2C_BUS_ERROR_FLAG);
+
+       /* Enable the I2C Controller */
+       CNS3xxx_I2C_ENABLE();
+}
+
+static irqreturn_t cns3xxx_i2c_isr(int irq, void *dev_id)
+{
+       struct cns3xxx_i2c *i2c = dev_id;
+       int i;
+       uint32_t stat = I2C_INTERRUPT_STATUS_REG;
+
+       /* Clear Interrupt */
+       I2C_INTERRUPT_STATUS_REG |= 0x1;
+
+       if (stat & I2C_BUS_ERROR_FLAG) {
+               i2c->state = STATE_ERROR;
+               i2c->error = (I2C_INTERRUPT_STATUS_REG & 0xff00)>>8;
+       } else {
+               if (i2c->msg->flags & I2C_M_RD) {
+                       for (i = 0; i <= i2c->rd_wr_len; i++)
+                       {
+                               *i2c->buf++ = ((I2C_READ_DATA_REG >> (8 * i)) & 0xff);
+                       }
+               }
+               i2c->state = STATE_DONE;
+       }
+       wake_up(&i2c->wait);
+       return IRQ_HANDLED;
+}
+
+static int __devinit cns3xxx_i2c_probe(struct platform_device *pdev)
+{
+       struct cns3xxx_i2c *i2c;
+       struct resource *res, *res2;
+       int ret;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res) {
+               printk("%s: IORESOURCE_MEM not defined \n", __FUNCTION__);
+               return -ENODEV;
+       }
+
+       res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+       if (!res2) {
+               printk("%s: IORESOURCE_IRQ not defined \n", __FUNCTION__);
+               return -ENODEV;
+       }
+
+       i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
+       if (!i2c)
+               return -ENOMEM;
+
+       if (!request_mem_region(res->start, res->end - res->start + 1,
+                               pdev->name)) {
+               dev_err(&pdev->dev, "Memory region busy\n");
+               ret = -EBUSY;
+               goto request_mem_failed;
+       }
+
+       i2c->dev = &pdev->dev;
+       i2c->base = ioremap(res->start, res->end - res->start + 1);
+       if (!i2c->base) {
+               dev_err(&pdev->dev, "Unable to map registers\n");
+               ret = -EIO;
+               goto map_failed;
+       }
+
+       cns3xxx_i2c_adapter_init(i2c);
+
+       init_waitqueue_head(&i2c->wait);
+       ret = request_irq(res2->start, cns3xxx_i2c_isr, 0, pdev->name, i2c);
+       if (ret) {
+               dev_err(&pdev->dev, "Cannot claim IRQ\n");
+               goto request_irq_failed;
+       }
+
+       platform_set_drvdata(pdev, i2c);
+       i2c->adap = cns3xxx_i2c_adapter;
+       i2c_set_adapdata(&i2c->adap, i2c);
+       i2c->adap.dev.parent = &pdev->dev;
+
+       /* add i2c adapter to i2c tree */
+       ret = i2c_add_numbered_adapter(&i2c->adap);
+       if (ret) {
+               dev_err(&pdev->dev, "Failed to add adapter\n");
+               goto add_adapter_failed;
+       }
+
+       return 0;
+
+      add_adapter_failed:
+       free_irq(res2->start, i2c);
+      request_irq_failed:
+       iounmap(i2c->base);
+      map_failed:
+       release_mem_region(res->start, res->end - res->start + 1);
+      request_mem_failed:
+       kfree(i2c);
+
+       return ret;
+}
+
+static int __devexit cns3xxx_i2c_remove(struct platform_device *pdev)
+{
+       struct cns3xxx_i2c *i2c = platform_get_drvdata(pdev);
+       struct resource *res;
+
+       /* disable i2c logic */
+       CNS3xxx_I2C_DISABLE_INTR();
+       CNS3xxx_I2C_DISABLE();
+       /* remove adapter & data */
+       i2c_del_adapter(&i2c->adap);
+       platform_set_drvdata(pdev, NULL);
+
+       res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+       if (res)
+               free_irq(res->start, i2c);
+
+       iounmap(i2c->base);
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (res)
+               release_mem_region(res->start, res->end - res->start + 1);
+
+       kfree(i2c);
+
+       return 0;
+}
+
+#ifdef CONFIG_PM
+#warning "CONFIG_PM defined: suspend and resume not implemented"
+#define cns3xxx_i2c_suspend    NULL
+#define cns3xxx_i2c_resume     NULL
+#else
+#define cns3xxx_i2c_suspend    NULL
+#define cns3xxx_i2c_resume     NULL
+#endif
+
+static struct platform_driver cns3xxx_i2c_driver = {
+       .probe = cns3xxx_i2c_probe,
+       .remove = cns3xxx_i2c_remove,
+       .suspend = cns3xxx_i2c_suspend,
+       .resume = cns3xxx_i2c_resume,
+       .driver = {
+               .owner = THIS_MODULE,
+               .name = "cns3xxx-i2c",
+       },
+};
+
+static int __init cns3xxx_i2c_init(void)
+{
+       return platform_driver_register(&cns3xxx_i2c_driver);
+}
+
+static void __exit cns3xxx_i2c_exit(void)
+{
+       platform_driver_unregister(&cns3xxx_i2c_driver);
+}
+
+module_init(cns3xxx_i2c_init);
+module_exit(cns3xxx_i2c_exit);
+
+MODULE_AUTHOR("Cavium Networks");
+MODULE_DESCRIPTION("Cavium CNS3XXX I2C Controller");
+MODULE_LICENSE("GPL");
index 1677cf3..df7ceac 100644 (file)
  obj-$(CONFIG_SCx200_ACB)      += scx200_acb.o
  obj-$(CONFIG_SCx200_I2C)      += scx200_i2c.o
  
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-cns3xxx.c
-@@ -0,0 +1,387 @@
-+/*
-+ * Cavium CNS3xxx I2C Host Controller
-+ *
-+ * Copyright 2010 Cavium Network
-+ * Copyright 2011 Gateworks Corporation
-+ *              Chris Lang <clang@gateworks.com>
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <asm/io.h>
-+#include <linux/wait.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
-+#include <linux/slab.h>
-+#include <mach/pm.h>
-+#include <mach/cns3xxx.h>
-+
-+/*
-+ * We need the memory map
-+ */
-+
-+
-+#define MISC_MEM_MAP_VALUE(reg_offset)        (*((uint32_t volatile *)(CNS3XXX_MISC_BASE_VIRT + reg_offset)))
-+#define MISC_IOCDB_CTRL                               MISC_MEM_MAP_VALUE(0x020)
-+
-+#define I2C_MEM_MAP_ADDR(x)         (CNS3XXX_SSP_BASE_VIRT + x)
-+#define I2C_MEM_MAP_VALUE(x)        (*((unsigned int volatile*)I2C_MEM_MAP_ADDR(x)))
-+
-+#define I2C_CONTROLLER_REG                    I2C_MEM_MAP_VALUE(0x20)
-+#define I2C_TIME_OUT_REG                      I2C_MEM_MAP_VALUE(0x24)
-+#define I2C_SLAVE_ADDRESS_REG                 I2C_MEM_MAP_VALUE(0x28)
-+#define I2C_WRITE_DATA_REG                    I2C_MEM_MAP_VALUE(0x2C)
-+#define I2C_READ_DATA_REG                     I2C_MEM_MAP_VALUE(0x30)
-+#define I2C_INTERRUPT_STATUS_REG              I2C_MEM_MAP_VALUE(0x34)
-+#define I2C_INTERRUPT_ENABLE_REG              I2C_MEM_MAP_VALUE(0x38)
-+#define I2C_TWI_OUT_DLY_REG                                                   I2C_MEM_MAP_VALUE(0x3C)
-+
-+#define I2C_BUS_ERROR_FLAG     (0x1)
-+#define I2C_ACTION_DONE_FLAG   (0x2)
-+
-+#define CNS3xxx_I2C_ENABLE()          (I2C_CONTROLLER_REG) |= ((unsigned int)0x1 << 31)
-+#define CNS3xxx_I2C_DISABLE()         (I2C_CONTROLLER_REG) &= ~((unsigned int)0x1 << 31)
-+#define CNS3xxx_I2C_ENABLE_INTR()     (I2C_INTERRUPT_ENABLE_REG) |= 0x03
-+#define CNS3xxx_I2C_DISABLE_INTR()    (I2C_INTERRUPT_ENABLE_REG) &= 0xfc
-+
-+#define TWI_TIMEOUT         (10*HZ)
-+#define I2C_100KHZ          100000
-+#define I2C_200KHZ          200000
-+#define I2C_300KHZ          300000
-+#define I2C_400KHZ          400000
-+
-+#define CNS3xxx_I2C_CLK     I2C_100KHZ
-+
-+#define STATE_DONE            1
-+#define STATE_ERROR           2
-+
-+struct cns3xxx_i2c {
-+      void __iomem *base;
-+      wait_queue_head_t wait;
-+      struct i2c_adapter adap;
-+      struct i2c_msg *msg;
-+      int state;              /* see STATE_ */
-+      int rd_wr_len;
-+      u8 *buf;
-+};
-+
-+static u32 cns3xxx_i2c_func(struct i2c_adapter *adap)
-+{
-+      return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static int
-+cns3xxx_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg)
-+{
-+      struct cns3xxx_i2c *i2c = i2c_get_adapdata(adap);
-+      int i, j;
-+      u8 buf[1] = { 0 };
-+
-+      if (msg->len == 0) {
-+              /*
-+               *      We are probably doing a probe for a device here,
-+               *      so set the length to one, and data to 0
-+               */
-+              msg->len = 1;
-+              i2c->buf = buf;
-+      } else {
-+              i2c->buf = msg->buf;
-+      }
-+
-+      if (msg->flags & I2C_M_TEN) {
-+              printk
-+                      ("%s:%d: Presently the driver does not handle extended addressing\n",
-+                              __FUNCTION__, __LINE__);
-+              return -EINVAL;
-+      }
-+      i2c->msg = msg;
-+
-+      for (i = 0; i < msg->len; i++) {
-+              if (msg->len - i >= 4)
-+                      i2c->rd_wr_len = 3;
-+              else
-+                      i2c->rd_wr_len = msg->len - i - 1;
-+
-+              // Set Data Width       and TWI_EN
-+              I2C_CONTROLLER_REG = 0x80000000 | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
-+
-+              // Clear Write Reg
-+              I2C_WRITE_DATA_REG = 0;
-+
-+              // Set the slave address
-+              I2C_SLAVE_ADDRESS_REG = (msg->addr << 1);
-+
-+              // Are we Writing
-+              if (!(msg->flags & I2C_M_RD)) {
-+                      I2C_CONTROLLER_REG |= (1 << 4);
-+                      if (i != 0) {
-+                              /*
-+                               * We need to set the address in the first byte.
-+                               * The base address is going to be in buf[0] and then
-+                               * it needs to be incremented by i - 1.
-+                               */
-+                              i2c->buf--;
-+                              *i2c->buf = buf[0] + i - 1;
-+
-+                              if (i2c->rd_wr_len < 3) {
-+                                      i += i2c->rd_wr_len;
-+                                      i2c->rd_wr_len++;
-+                                      I2C_CONTROLLER_REG = 0x80000000 | (1 << 4) | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
-+                              } else {
-+                                      i += i2c->rd_wr_len - 1;
-+                              }
-+                      } else {
-+                              i += i2c->rd_wr_len;
-+                              buf[0] = *i2c->buf;
-+                      }
-+                      for (j = 0; j <= i2c->rd_wr_len; j++) {
-+                              I2C_WRITE_DATA_REG |= ((*i2c->buf++) << (8 * j));
-+                      }
-+              } else {
-+                      i += i2c->rd_wr_len;
-+              }
-+
-+              // Start the Transfer
-+              i2c->state = 0;         // Clear out the State
-+              I2C_CONTROLLER_REG |= (1 << 6);
-+
-+              if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
-+                              (i2c->state == STATE_DONE), TWI_TIMEOUT)) {
-+                      if (i2c->state == STATE_ERROR) {
-+                              return -EIO;
-+                      }
-+              } else {
-+                      return -ETIMEDOUT;
-+              }
-+      }
-+      return 0;
-+}
-+
-+static int
-+cns3xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
-+{
-+      int i;
-+      int ret;
-+      for (i = 0; i < num; i++)
-+      {
-+              ret = cns3xxx_i2c_xfer_msg(adap, &msgs[i]);
-+              if (ret < 0) {
-+                      return ret;
-+              }
-+      }
-+      return num;
-+}
-+
-+
-+static struct i2c_algorithm cns3xxx_i2c_algo = {
-+      .master_xfer = cns3xxx_i2c_xfer,
-+      .functionality = cns3xxx_i2c_func,
-+};
-+
-+static struct i2c_adapter cns3xxx_i2c_adapter = {
-+      .owner = THIS_MODULE,
-+      .algo = &cns3xxx_i2c_algo,
-+      .algo_data = NULL,
-+      .nr = 0,
-+      .name = "CNS3xxx I2C 0",
-+      .retries = 5,
-+};
-+
-+static void cns3xxx_i2c_adapter_init(struct cns3xxx_i2c *i2c)
-+{
-+        cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
-+        cns3xxx_pwr_power_up(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
-+        cns3xxx_pwr_soft_rst(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
-+
-+      /* Disable the I2C */
-+      I2C_CONTROLLER_REG = 0; /* Disabled the I2C */
-+
-+      //enable SCL and SDA which share pin with GPIOB_PIN_EN(0x18)
-+      //GPIOB[12]: SCL
-+      //GPIOB[13]: SDA
-+      (*(u32*)(CNS3XXX_MISC_BASE_VIRT+0x18)) |= ((1<<12)|(1<<13));
-+
-+      MISC_IOCDB_CTRL &= ~0x300;
-+      MISC_IOCDB_CTRL |= 0x300; //21mA...
-+
-+      /* Check the Reg Dump when testing */
-+      I2C_TIME_OUT_REG =
-+          ((((((cns3xxx_cpu_clock()*(1000000/8)) / (2 * CNS3xxx_I2C_CLK)) -
-+              1) & 0x3FF) << 8) | (1 << 7) | 0x7F);
-+      I2C_TWI_OUT_DLY_REG |= 0x3;
-+
-+      /* Enable The Interrupt */
-+      CNS3xxx_I2C_ENABLE_INTR();
-+
-+      /* Clear Interrupt Status (0x2 | 0x1) */
-+      I2C_INTERRUPT_STATUS_REG |= (I2C_ACTION_DONE_FLAG | I2C_BUS_ERROR_FLAG);
-+
-+      /* Enable the I2C Controller */
-+      CNS3xxx_I2C_ENABLE();
-+}
-+
-+static irqreturn_t cns3xxx_i2c_isr(int irq, void *dev_id)
-+{
-+      struct cns3xxx_i2c *i2c = dev_id;
-+      int i;
-+      uint32_t stat = I2C_INTERRUPT_STATUS_REG;
-+
-+      /* Clear Interrupt */
-+      I2C_INTERRUPT_STATUS_REG |= 0x1;
-+
-+      if (stat & I2C_BUS_ERROR_FLAG) {
-+              i2c->state = STATE_ERROR;
-+      } else {
-+              if (i2c->msg->flags & I2C_M_RD) {
-+                      for (i = 0; i <= i2c->rd_wr_len; i++)
-+                      {
-+                              *i2c->buf++ = ((I2C_READ_DATA_REG >> (8 * i)) & 0xff);
-+                      }
-+              }
-+              i2c->state = STATE_DONE;
-+      }
-+      wake_up(&i2c->wait);
-+      return IRQ_HANDLED;
-+}
-+
-+static int __devinit cns3xxx_i2c_probe(struct platform_device *pdev)
-+{
-+      struct cns3xxx_i2c *i2c;
-+      struct resource *res, *res2;
-+      int ret;
-+
-+      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+      if (!res) {
-+              printk("%s: IORESOURCE_MEM not defined \n", __FUNCTION__);
-+              return -ENODEV;
-+      }
-+
-+      res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+      if (!res2) {
-+              printk("%s: IORESOURCE_IRQ not defined \n", __FUNCTION__);
-+              return -ENODEV;
-+      }
-+
-+      i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
-+      if (!i2c)
-+              return -ENOMEM;
-+
-+      if (!request_mem_region(res->start, res->end - res->start + 1,
-+                              pdev->name)) {
-+              dev_err(&pdev->dev, "Memory region busy\n");
-+              ret = -EBUSY;
-+              goto request_mem_failed;
-+      }
-+
-+      i2c->base = ioremap(res->start, res->end - res->start + 1);
-+      if (!i2c->base) {
-+              dev_err(&pdev->dev, "Unable to map registers\n");
-+              ret = -EIO;
-+              goto map_failed;
-+      }
-+
-+      cns3xxx_i2c_adapter_init(i2c);
-+
-+      init_waitqueue_head(&i2c->wait);
-+      ret = request_irq(res2->start, cns3xxx_i2c_isr, 0, pdev->name, i2c);
-+      if (ret) {
-+              dev_err(&pdev->dev, "Cannot claim IRQ\n");
-+              goto request_irq_failed;
-+      }
-+
-+      platform_set_drvdata(pdev, i2c);
-+      i2c->adap = cns3xxx_i2c_adapter;
-+      i2c_set_adapdata(&i2c->adap, i2c);
-+      i2c->adap.dev.parent = &pdev->dev;
-+
-+      /* add i2c adapter to i2c tree */
-+      ret = i2c_add_numbered_adapter(&i2c->adap);
-+      if (ret) {
-+              dev_err(&pdev->dev, "Failed to add adapter\n");
-+              goto add_adapter_failed;
-+      }
-+
-+      return 0;
-+
-+      add_adapter_failed:
-+      free_irq(res2->start, i2c);
-+      request_irq_failed:
-+      iounmap(i2c->base);
-+      map_failed:
-+      release_mem_region(res->start, res->end - res->start + 1);
-+      request_mem_failed:
-+      kfree(i2c);
-+
-+      return ret;
-+}
-+
-+static int __devexit cns3xxx_i2c_remove(struct platform_device *pdev)
-+{
-+      struct cns3xxx_i2c *i2c = platform_get_drvdata(pdev);
-+      struct resource *res;
-+
-+      /* disable i2c logic */
-+      CNS3xxx_I2C_DISABLE_INTR();
-+      CNS3xxx_I2C_DISABLE();
-+      /* remove adapter & data */
-+      i2c_del_adapter(&i2c->adap);
-+      platform_set_drvdata(pdev, NULL);
-+
-+      res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+      if (res)
-+              free_irq(res->start, i2c);
-+
-+      iounmap(i2c->base);
-+
-+      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+      if (res)
-+              release_mem_region(res->start, res->end - res->start + 1);
-+
-+      kfree(i2c);
-+
-+      return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+#warning "CONFIG_PM defined: suspend and resume not implemented"
-+#define cns3xxx_i2c_suspend   NULL
-+#define cns3xxx_i2c_resume    NULL
-+#else
-+#define cns3xxx_i2c_suspend   NULL
-+#define cns3xxx_i2c_resume    NULL
-+#endif
-+
-+static struct platform_driver cns3xxx_i2c_driver = {
-+      .probe = cns3xxx_i2c_probe,
-+      .remove = cns3xxx_i2c_remove,
-+      .suspend = cns3xxx_i2c_suspend,
-+      .resume = cns3xxx_i2c_resume,
-+      .driver = {
-+              .owner = THIS_MODULE,
-+              .name = "cns3xxx-i2c",
-+      },
-+};
-+
-+static int __init cns3xxx_i2c_init(void)
-+{
-+      return platform_driver_register(&cns3xxx_i2c_driver);
-+}
-+
-+static void __exit cns3xxx_i2c_exit(void)
-+{
-+      platform_driver_unregister(&cns3xxx_i2c_driver);
-+}
-+
-+module_init(cns3xxx_i2c_init);
-+module_exit(cns3xxx_i2c_exit);
-+
-+MODULE_AUTHOR("Cavium Networks");
-+MODULE_DESCRIPTION("Cavium CNS3XXX I2C Controller");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/cns3xxx/patches-3.3/440-i2c_retry.patch b/target/linux/cns3xxx/patches-3.3/440-i2c_retry.patch
deleted file mode 100644 (file)
index 707de82..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/drivers/i2c/busses/i2c-cns3xxx.c
-+++ b/drivers/i2c/busses/i2c-cns3xxx.c
-@@ -2,8 +2,9 @@
-  * Cavium CNS3xxx I2C Host Controller
-  *
-  * Copyright 2010 Cavium Network
-- * Copyright 2011 Gateworks Corporation
-+ * Copyright 2012 Gateworks Corporation
-  *              Chris Lang <clang@gateworks.com>
-+ *        Tim Harvey <tharvey@gateworks.com>
-  *
-  * This file is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License, Version 2, as
-@@ -63,13 +64,15 @@
- #define STATE_ERROR           2
- struct cns3xxx_i2c {
--      void __iomem *base;
--      wait_queue_head_t wait;
--      struct i2c_adapter adap;
--      struct i2c_msg *msg;
--      int state;              /* see STATE_ */
--      int rd_wr_len;
--      u8 *buf;
-+      struct device           *dev;
-+      void __iomem            *base;          /* virtual */
-+      wait_queue_head_t       wait;
-+      struct i2c_adapter      adap;
-+      struct i2c_msg          *msg;
-+      u8                      state;          /* see STATE_ */
-+      u8                      error;          /* see TWI_STATUS register */
-+      int                     rd_wr_len;
-+      u8                      *buf;
- };
- static u32 cns3xxx_i2c_func(struct i2c_adapter *adap)
-@@ -150,14 +153,18 @@ cns3xxx_i2c_xfer_msg(struct i2c_adapter
-               // Start the Transfer
-               i2c->state = 0;         // Clear out the State
-+              i2c->error = 0;
-               I2C_CONTROLLER_REG |= (1 << 6);
-               if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
-                               (i2c->state == STATE_DONE), TWI_TIMEOUT)) {
-                       if (i2c->state == STATE_ERROR) {
--                              return -EIO;
-+                              dev_dbg(i2c->dev, "controller error: 0x%2x", i2c->error);
-+                              return -EAGAIN; // try again
-                       }
-               } else {
-+                      dev_err(i2c->dev, "controller timed out "
-+                              "waiting for start condition to finish\n");
-                       return -ETIMEDOUT;
-               }
-       }
-@@ -238,6 +245,7 @@ static irqreturn_t cns3xxx_i2c_isr(int i
-       if (stat & I2C_BUS_ERROR_FLAG) {
-               i2c->state = STATE_ERROR;
-+              i2c->error = (I2C_INTERRUPT_STATUS_REG & 0xff00)>>8;
-       } else {
-               if (i2c->msg->flags & I2C_M_RD) {
-                       for (i = 0; i <= i2c->rd_wr_len; i++)
-@@ -280,6 +288,7 @@ static int __devinit cns3xxx_i2c_probe(s
-               goto request_mem_failed;
-       }
-+      i2c->dev = &pdev->dev;
-       i2c->base = ioremap(res->start, res->end - res->start + 1);
-       if (!i2c->base) {
-               dev_err(&pdev->dev, "Unable to map registers\n");