--- /dev/null
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=mipsel
+BOARD:=rb1xx
+BOARDNAME:=Microtik RouterBoard 1xx
+FEATURES:=squashfs jffs2 broken
+
+define Target/Description
+ Build firmware images for ADMTek ADM5120 based boards
+ (e.g : RouterBoard RB1xx (111,112,133,153)
+endef
+
+include $(INCLUDE_DIR)/kernel-build.mk
+
+# include the profiles
+-include profiles/*.mk
+
+$(eval $(call BuildKernel))
--- /dev/null
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
+CONFIG_ADM5120_GPIO=y
+CONFIG_ADM5120_NR_UARTS=2
+CONFIG_BASE_SMALL=0
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_BLK_DEV_CF_MIPS is not set
+CONFIG_CIFS_DEBUG2=y
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CMDLINE="console=ttyS0,115200 rootfs=jffs2,squashfs init=/etc/preinit"
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_DDB5477 is not set
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_ELF_CORE=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FS_MBCACHE=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_ACL=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_GEN_RTC is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_48 is not set
+# CONFIG_I2C is not set
+# CONFIG_IDE is not set
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_INPUT=y
+# CONFIG_INPUT_EVDEV is not set
+CONFIG_IPV6_MIP6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NETBIOS_NS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JOLIET is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_VR41XX is not set
+CONFIG_MII=m
+# CONFIG_MINIX_FS is not set
+CONFIG_MINI_FO=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ADM5120=y
+CONFIG_MIPS_ADM5120_ENET=y
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_EV64120 is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_MTX1 is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MIPS_VPE_LOADER is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_ADM5120 is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_MYLOADER_PARTS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_RB500=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_KEY=y
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PARTITION_ADVANCED is not set
+# CONFIG_PCIPCWATCHDOG is not set
+CONFIG_PCI_ADM5120=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_RTC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_ADM5120=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USB is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+CONFIG_YAFFS_DOES_ECC=y
+CONFIG_YAFFS_ECC_WRONG_ORDER=y
+CONFIG_YAFFS_FS=y
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_YAFFS_YAFFS1=y
+CONFIG_YAFFS_YAFFS2=y
--- /dev/null
+#
+# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
+#
+
+obj-y := setup.o prom.o irq.o memory.o mipsIRQ.o adm5120_info.o
+
+EXTRA_AFLAGS := $(CFLAGS)
--- /dev/null
+/*
+ * $Id$
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <adm5120_info.h>
+#include <adm5120_defs.h>
+#include <adm5120_switch.h>
+#include <myloader.h>
+
+/* boot loaders specific definitions */
+#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE from other bootloaders */
+
+struct adm5120_info adm5120_info = {
+ .cpu_speed = CPU_SPEED_175,
+ .cpu_package = CPU_PACKAGE_PQFP,
+ .boot_loader = BOOT_LOADER_UNKNOWN,
+ .board_type = BOARD_TYPE_UNKNOWN
+};
+
+static char *boot_loader_names[BOOT_LOADER_LAST+1] = {
+ [BOOT_LOADER_UNKNOWN] = "Unknown",
+ [BOOT_LOADER_CFE] = "CFE",
+ [BOOT_LOADER_UBOOT] = "U-Boot",
+ [BOOT_LOADER_MYLOADER] = "MyLoader"
+};
+
+/*
+ * CPU settings detection
+ */
+#define CODE_GET_PC(c) ((c) & CODE_PC_MASK)
+#define CODE_GET_REV(c) (((c) >> CODE_REV_SHIFT) & CODE_REV_MASK)
+#define CODE_GET_PK(c) (((c) >> CODE_PK_SHIFT) & CODE_PK_MASK)
+#define CODE_GET_CLKS(c) (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK)
+#define CODE_GET_NAB(c) (((c) & CODE_NAB) != 0)
+
+static void __init detect_cpu_info(void)
+{
+ uint32_t *reg;
+ uint32_t code;
+ uint32_t clks;
+
+ reg = (uint32_t *)KSEG1ADDR(ADM5120_SWITCH_BASE+SWITCH_REG_CODE);
+ code = *reg;
+
+ clks = CODE_GET_CLKS(code);
+
+ adm5120_info.product_code = CODE_GET_PC(code);
+ adm5120_info.revision = CODE_GET_REV(code);
+
+ adm5120_info.cpu_speed = CPU_SPEED_175;
+ if (clks & 1)
+ adm5120_info.cpu_speed += 25000000;
+ if (clks & 2)
+ adm5120_info.cpu_speed += 50000000;
+
+ adm5120_info.cpu_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
+ CPU_PACKAGE_BGA : CPU_PACKAGE_PQFP;
+
+ adm5120_info.nand_boot = CODE_GET_NAB(code);
+
+}
+
+/*
+ * Boot loader detection routines
+ */
+static int __init detect_cfe(void)
+{
+ /*
+ * This method only works, when we are booted directly from the CFE.
+ */
+ uint32_t cfe_handle = (uint32_t) fw_arg0;
+ uint32_t cfe_a1_val = (uint32_t) fw_arg1;
+ uint32_t cfe_entry = (uint32_t) fw_arg2;
+ uint32_t cfe_seal = (uint32_t) fw_arg3;
+
+ /* Check for CFE by finding the CFE magic number */
+ if (cfe_seal != CFE_EPTSEAL) {
+ /* We are not booted from CFE */
+ return 0;
+ }
+
+ /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 SoC */
+ if (cfe_a1_val != 0) {
+ return 0;
+ }
+
+ /* The cfe_handle, and the cfe_entry must be kernel mode addresses */
+ if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) {
+ return 0;
+ }
+
+ return 1;
+}
+
+static int __init detect_uboot(void)
+{
+ /* FIXME: not yet implemented */
+ return 0;
+}
+
+static int __init detect_myloader(void)
+{
+ struct mylo_system_params *sysp;
+ struct mylo_board_params *boardp;
+ struct mylo_partition_table *parts;
+
+ sysp = (struct mylo_system_params *)(MYLO_MIPS_SYS_PARAMS);
+ boardp = (struct mylo_board_params *)(MYLO_MIPS_BOARD_PARAMS);
+ parts = (struct mylo_partition_table *)(MYLO_MIPS_PARTITIONS);
+
+ /* Check for some magic numbers */
+ if ((sysp->magic != MYLO_MAGIC_SYS_PARAMS) ||
+ (boardp->magic != MYLO_MAGIC_BOARD_PARAMS) ||
+ (parts->magic != MYLO_MAGIC_PARTITIONS))
+ return 0;
+
+ return 1;
+}
+
+static int __init detect_routerboot(void)
+{
+ /* FIXME: not yet implemented */
+ return 0;
+}
+
+static int __init detect_bootloader(void)
+{
+ if (detect_cfe())
+ return BOOT_LOADER_CFE;
+
+ if (detect_uboot())
+ return BOOT_LOADER_UBOOT;
+
+ if (detect_myloader())
+ return BOOT_LOADER_MYLOADER;
+
+ if (detect_routerboot())
+ return BOOT_LOADER_ROUTERBOOT;
+
+ return BOOT_LOADER_UNKNOWN;
+}
+
+/*
+ * Board detection
+ */
+static void __init detect_board_type(void)
+{
+ /* FIXME: not yet implemented */
+}
+
+void __init adm5120_info_show(void)
+{
+ printk("ADM%04X%s revision %d, running at %ldMHz\n",
+ adm5120_info.product_code,
+ (adm5120_info.cpu_package == CPU_PACKAGE_BGA) ? "" : "P",
+ adm5120_info.revision,
+ (adm5120_info.cpu_speed / 1000000)
+ );
+ printk("Boot loader is: %s\n", boot_loader_names[adm5120_info.boot_loader]);
+ printk("Booted from : %s flash\n", adm5120_info.nand_boot ? "NAND" : "NOR");
+}
+
+void __init adm5120_info_init(void)
+{
+ detect_cpu_info();
+ adm5120_info.boot_loader = detect_bootloader();
+ detect_board_type();
+
+ adm5120_info_show();
+}
--- /dev/null
+/*
+ * Copyright (C) ADMtek Incorporated.
+ * Creator : daniell@admtek.com.tw
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000, 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2001 Ralf Baechle
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/pm.h>
+
+#include <asm/irq.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/gdb-stub.h>
+#include <asm/irq_cpu.h>
+
+#define MIPS_CPU_TIMER_IRQ 7
+
+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
+extern irq_desc_t irq_desc[];
+extern asmlinkage void mipsIRQ(void);
+
+int mips_int_lock(void);
+void mips_int_unlock(int);
+
+unsigned int mips_counter_frequency;
+
+#define ADM5120_INTC_REG(reg) (*(volatile u32 *)(KSEG1ADDR(0x12200000+(reg))))
+#define ADM5120_INTC_STATUS ADM5120_INTC_REG(0x00)
+#define ADM5120_INTC_ENABLE ADM5120_INTC_REG(0x08)
+#define ADM5120_INTC_DISABLE ADM5120_INTC_REG(0x0c)
+#define ADM5120_IRQ_MAX 9
+#define ADM5120_IRQ_MASK 0x3ff
+
+void adm5120_hw0_irqdispatch(struct pt_regs *regs)
+{
+ unsigned long intsrc;
+ int i;
+
+ intsrc = ADM5120_INTC_STATUS & ADM5120_IRQ_MASK;
+
+ for (i = 0; intsrc; intsrc >>= 1, i++)
+ if (intsrc & 0x1)
+ do_IRQ(i);
+ else
+ spurious_interrupt();
+}
+
+void mips_timer_interrupt(struct pt_regs *regs)
+{
+ write_c0_compare(read_c0_count()+ mips_counter_frequency/HZ);
+ ll_timer_interrupt(MIPS_CPU_TIMER_IRQ);
+}
+
+/* Main interrupt dispatcher */
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+ unsigned int cp0_cause = read_c0_cause() & read_c0_status();
+
+ if (cp0_cause & CAUSEF_IP7) {
+ mips_timer_interrupt( regs);
+ } else if (cp0_cause & CAUSEF_IP2) {
+ adm5120_hw0_irqdispatch( regs);
+ }
+}
+
+void enable_adm5120_irq(unsigned int irq)
+{
+ int s;
+
+ /* Disable all interrupts (FIQ/IRQ) */
+ s = mips_int_lock();
+
+ if ((irq < 0) || (irq > ADM5120_IRQ_MAX))
+ goto err_exit;
+
+ ADM5120_INTC_ENABLE = (1<<irq);
+
+err_exit:
+
+ /* Restore the interrupts states */
+ mips_int_unlock(s);
+}
+
+
+void disable_adm5120_irq(unsigned int irq)
+{
+ int s;
+
+ /* Disable all interrupts (FIQ/IRQ) */
+ s = mips_int_lock();
+
+ if ((irq < 0) || (irq > ADM5120_IRQ_MAX))
+ goto err_exit;
+
+ ADM5120_INTC_DISABLE = (1<<irq);
+
+err_exit:
+ /* Restore the interrupts states */
+ mips_int_unlock(s);
+}
+
+unsigned int startup_adm5120_irq(unsigned int irq)
+{
+ enable_adm5120_irq(irq);
+ return 0;
+}
+
+void shutdown_adm5120_irq(unsigned int irq)
+{
+ disable_adm5120_irq(irq);
+}
+
+static inline void ack_adm5120_irq(unsigned int irq_nr)
+{
+ ADM5120_INTC_DISABLE = (1 << irq_nr);
+}
+
+
+static void end_adm5120_irq(unsigned int irq_nr)
+{
+ ADM5120_INTC_ENABLE = (1 << irq_nr);
+}
+
+static hw_irq_controller adm5120_irq_type = {
+ .typename = "MIPS",
+ .startup = startup_adm5120_irq,
+ .shutdown = shutdown_adm5120_irq,
+ .enable = enable_adm5120_irq,
+ .disable = disable_adm5120_irq,
+ .ack = ack_adm5120_irq,
+ .end = end_adm5120_irq,
+ .set_affinity = NULL,
+};
+
+
+void __init arch_init_irq(void)
+{
+ int i;
+
+ for (i = 0; i <= ADM5120_IRQ_MAX; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 1;
+ irq_desc[i].chip = &adm5120_irq_type;
+ }
+}
--- /dev/null
+/*****************************************************************************
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2003 ADMtek Incorporated.
+ * daniell@admtek.com.tw
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *****************************************************************************/
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/pfn.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm-mips/mips-boards/prom.h>
+
+extern char *prom_getenv(char *envname);
+
+#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
+
+#define ADM5120_MEMCTRL 0x1200001c
+#define ADM5120_MEMCTRL_SDRAM_MASK 0x7
+
+static const unsigned long adm_sdramsize[] __initdata = {
+ 0x0, /* Reserved */
+ 0x0400000, /* 4Mb */
+ 0x0800000, /* 8Mb */
+ 0x1000000, /* 16Mb */
+ 0x4000000, /* 64Mb */
+ 0x8000000, /* 128Mb */
+};
+
+/* determined physical memory size, not overridden by command line args */
+unsigned long physical_memsize = 0L;
+
+struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+
+struct prom_pmemblock * __init prom_getmdesc(void)
+{
+ char *memsize_str;
+ unsigned int memsize;
+ char cmdline[CL_SIZE], *ptr;
+
+ memsize_str = prom_getenv("memsize");
+
+ if (!memsize_str)
+ {
+ prom_printf("memsize not set in boot prom, set to default (8Mb)\n");
+ physical_memsize = 0x00800000;
+ }
+ else
+#ifdef DEBUG
+ prom_printf("prom_memsize = %s\n", memsize_str);
+#endif
+ physical_memsize = simple_strtol(memsize_str, NULL, 0);
+
+ /* Check the command line for a memsize directive that overrides
+ * the physical/default amount */
+ strcpy(cmdline, arcs_cmdline);
+ ptr = strstr(cmdline, "memsize=");
+ if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+ ptr = strstr(ptr, " memsize=");
+
+ if (ptr)
+ memsize = memparse(ptr + 8, &ptr);
+ else
+ memsize = physical_memsize;
+
+ memset(mdesc, 0, sizeof(mdesc));
+
+ mdesc[0].type = BOOT_MEM_RAM;
+ mdesc[0].base = CPHYSADDR(PFN_ALIGN(&_end));
+ mdesc[0].size = memsize - mdesc[0].base;
+
+ return &mdesc[0];
+}
+
+void __init prom_meminit(void)
+{
+ struct prom_pmemblock *p;
+
+ p = prom_getmdesc();
+
+ while (p->size)
+ {
+ long type;
+ unsigned long base, size;
+ base = p->base;
+ type = p->type,
+ size = p->size;
+ add_memory_region(base, size, type);
+ p++;
+ }
+}
+
+#if 0
+void __init prom_meminit(void)
+{
+ unsigned long base = CPHYSADDR(PFN_ALIGN(&_end));
+ unsigned long size;
+
+ u32 memctrl = *(u32*)KSEG1ADDR(ADM5120_MEMCTRL);
+ size = adm_sdramsize[memctrl & ADM5120_MEMCTRL_SDRAM_MASK];
+ add_memory_region(base, size-base, BOOT_MEM_RAM);
+}
+#endif
+
+unsigned long __init prom_free_prom_memory(void)
+{
+ /* We do not have to prom memory to free */
+ return 0;
+}
--- /dev/null
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Interrupt exception dispatch code.
+ *
+ */
+#include <linux/autoconf.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+#define STATUS_IE 0x00000001
+
+/* A lot of complication here is taken away because:
+ *
+ * 1) We handle one interrupt and return, sitting in a loop and moving across
+ * all the pending IRQ bits in the cause register is _NOT_ the answer, the
+ * common case is one pending IRQ so optimize in that direction.
+ *
+ * 2) We need not check against bits in the status register IRQ mask, that
+ * would make this routine slow as hell.
+ *
+ * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
+ * between like BSD spl() brain-damage.
+ *
+ * Furthermore, the IRQs on the MIPS board look basically (barring software
+ * IRQs which we don't use at all and all external interrupt sources are
+ * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ * MIPS IRQ Source
+ * -------- ------
+ * 0 Software (ignored)
+ * 1 Software (ignored)
+ * 2 Combined hardware interrupt (hw0)
+ * 3 Hardware (ignored)
+ * 4 Hardware (ignored)
+ * 5 Hardware (ignored)
+ * 6 Hardware (ignored)
+ * 7 R4k timer (what we use)
+ *
+ * Note: On the SEAD board thing are a little bit different.
+ * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
+ * wired to UART1.
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ---- R4k Timer
+ * Lowest ---- Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+ .text
+ .set noreorder
+ .set noat
+ .align 5
+
+NESTED(mipsIRQ, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+
+ mfc0 s0, CP0_CAUSE
+ mfc0 s1, CP0_STATUS
+ and s0, s0, s1
+
+ /* First we check for r4k counter/timer IRQ. */
+ andi a0, s0, CAUSEF_IP7
+ beq a0, zero, 1f
+ nop
+
+ move a0, sp
+ jal mips_timer_interrupt
+ nop
+
+ j ret_from_irq
+ nop
+
+1:
+ andi a0, s0, CAUSEF_IP2
+ beq a0, zero, 1f
+ nop
+
+ move a0, sp
+ jal adm5120_hw0_irqdispatch
+ nop
+1:
+ j ret_from_irq
+ nop
+
+END(mipsIRQ)
+
+
+LEAF(mips_int_lock)
+ .set noreorder
+ mfc0 v0, CP0_STATUS
+ li v1, ~STATUS_IE
+ and v1, v1, v0
+ mtc0 v1, CP0_STATUS
+ j ra
+ and v0, v0, STATUS_IE
+ .set reorder
+END(mips_int_lock)
+
+
+LEAF(mips_int_unlock)
+ mfc0 v0, CP0_STATUS
+ and a0, a0, STATUS_IE
+ or v0, v0, a0
+ mtc0 v0, CP0_STATUS
+ j ra
+ nop
+END(mips_int_unlock)
+
--- /dev/null
+/*****************************************************************************
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2003 ADMtek Incorporated.
+ * daniell@admtek.com.tw
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ *****************************************************************************/
+
+#include <linux/init.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <adm5120_info.h>
+
+void setup_prom_printf(int);
+void prom_printf(char *, ...);
+void prom_meminit(void);
+
+#define ADM5120_ENVC 1
+
+char *adm5120_envp[2*ADM5120_ENVC] = {"memsize","0x001000000"};
+
+#define READCSR(r) *(volatile unsigned long *)(0xB2600000+(r))
+#define WRITECSR(r,v) *(volatile unsigned long *)(0xB2600000+(r)) = v
+
+#define UART_DR_REG 0x00
+#define UART_FR_REG 0x18
+#define UART_TX_FIFO_FULL 0x20
+
+int putPromChar(char c)
+{
+ WRITECSR(UART_DR_REG, c);
+ while ( (READCSR(UART_FR_REG) & UART_TX_FIFO_FULL) );
+ return 0;
+}
+
+/*
+ * Ugly prom_printf used for debugging
+ */
+
+void prom_printf(char *fmt, ...)
+{
+ va_list args;
+ int l;
+ char *p, *buf_end;
+ char buf[1024];
+
+ va_start(args, fmt);
+ l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
+ va_end(args);
+
+ buf_end = buf + l;
+
+ for (p = buf; p < buf_end; p++) {
+ /* Crude cr/nl handling is better than none */
+ if (*p == '\n')
+ putPromChar('\r');
+ putPromChar(*p);
+ }
+}
+
+char *prom_getenv(char *envname)
+{
+ int i, index=0;
+
+ i = strlen(envname);
+
+ printk(KERN_INFO "GETENV: envname is %s\n", envname);
+
+ while(index < (2*ADM5120_ENVC)) {
+ if(strncmp(envname, adm5120_envp[index], i) == 0) {
+ printk(KERN_INFO "GETENV: returning %s\n", adm5120_envp[index+1]);
+ return(adm5120_envp[index+1]);
+ }
+ index += 2;
+ }
+
+ printk(KERN_INFO "GETENV: not found.\n");
+ return(NULL);
+}
+
+
+/*
+ * initialize the prom module.
+ */
+void __init prom_init(void)
+{
+ /* you should these macros defined in include/asm/bootinfo.h */
+ mips_machgroup = MACH_GROUP_ADM_GW;
+ mips_machtype = MACH_ADM_GW_5120;
+
+ adm5120_info_init();
+
+ /* init command line, register a default kernel command line */
+ strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit");
+
+ /* init memory map */
+ prom_meminit();
+}
--- /dev/null
+/*
+ * Copyright (C) ADMtek Incorporated.
+ * Creator : daniell@admtek.com.tw
+ * Copyright 1999, 2000 MIPS Technologies, Inc.
+ * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/reboot.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <adm5120_info.h>
+
+#define ADM5120_SOFTRESET 0x12000004
+#define STATUS_IE 0x00000001
+#define ALLINTS (IE_IRQ0 | IE_IRQ5 | STATUS_IE)
+
+void mips_time_init(void);
+
+extern unsigned int mips_counter_frequency;
+
+void adm5120_restart(char *command)
+{
+ *(u32*)KSEG1ADDR(ADM5120_SOFTRESET)=1;
+}
+
+
+void adm5120_halt(void)
+{
+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+ while (1);
+}
+
+
+void adm5120_power_off(void)
+{
+ adm5120_halt();
+}
+
+void __init adm5120_time_init(void)
+{
+ mips_counter_frequency = adm5120_info.cpu_speed >> 1;
+}
+
+void __init plat_timer_setup(struct irqaction *irq)
+{
+ /* to generate the first timer interrupt */
+ write_c0_compare(read_c0_count()+ mips_counter_frequency/HZ);
+ clear_c0_status(ST0_BEV);
+ set_c0_status(ALLINTS);
+}
+
+void __init plat_mem_setup(void)
+{
+ printk(KERN_INFO "ADM5120 board setup\n");
+
+ board_time_init = adm5120_time_init;
+ //board_timer_setup = mips_timer_setup;
+
+ _machine_restart = adm5120_restart;
+ _machine_halt = adm5120_halt;
+ pm_power_off = adm5120_power_off;
+
+ set_io_port_base(KSEG1);
+}
+
+const char *get_system_type(void)
+{
+ return "ADM5120 Board";
+}
+
+static struct resource adm5120_hcd_resources[] = {
+ [0] = {
+ .start = 0x11200000,
+ .end = 0x11200084,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x3,
+ .end = 0x3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device adm5120hcd_device = {
+ .name = "adm5120-hcd",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(adm5120_hcd_resources),
+ .resource = adm5120_hcd_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &adm5120hcd_device,
+};
+
+static int __init adm5120_init(void)
+{
+ return platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+subsys_initcall(adm5120_init);
--- /dev/null
+/*
+ * Copyright (C) ADMtek Incorporated.
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ */
+
+#include <linux/autoconf.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <adm5120_defs.h>
+
+volatile u32* pci_config_address_reg = (volatile u32*)KSEG1ADDR(ADM5120_PCICFG_ADDR);
+volatile u32* pci_config_data_reg = (volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA);
+
+#define PCI_ENABLE 0x80000000
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t *val)
+{
+ *pci_config_address_reg = ((bus->number & 0xff) << 0x10) |
+ ((devfn & 0xff) << 0x08) | (where & 0xfc) | PCI_ENABLE;
+ switch (size) {
+ case 1:
+ *val = ((*pci_config_data_reg)>>((where&3)<<3))&0xff;
+ break;
+ case 2:
+ *val = ((*pci_config_data_reg)>>((where&3)<<3))&0xffff;
+ break;
+ default:
+ *val = (*pci_config_data_reg);
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t val)
+{
+ *pci_config_address_reg = ((bus->number & 0xff) << 0x10) |
+ ((devfn & 0xff) << 0x08) | (where & 0xfc) | PCI_ENABLE;
+ switch (size) {
+ case 1:
+ *(volatile u8 *)(((int)pci_config_data_reg) +
+ (where & 3)) = val;
+ break;
+ case 2:
+ *(volatile u16 *)(((int)pci_config_data_reg) +
+ (where & 2)) = (val);
+ break;
+ default:
+ *pci_config_data_reg = (val);
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops adm5120_pci_ops = {
+ .read = pci_config_read,
+ .write = pci_config_write,
+};
--- /dev/null
+/*
+ * Copyright (C) ADMtek Incorporated.
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ */
+
+#include <linux/autoconf.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <adm5120_info.h>
+#include <adm5120_defs.h>
+
+extern struct pci_ops adm5120_pci_ops;
+
+#define PCI_CMM_IOACC_EN 0x1
+#define PCI_CMM_MEMACC_EN 0x2
+#define PCI_CMM_MASTER_EN 0x4
+#define PCI_CMM_DEF \
+ (PCI_CMM_IOACC_EN | PCI_CMM_MEMACC_EN | PCI_CMM_MASTER_EN)
+
+#define PCI_DEF_CACHE_LINE_SZ 4
+
+
+struct resource pci_io_resource = {
+ .name = "ADM5120 PCI I/O",
+ .start = ADM5120_PCIIO_BASE,
+ .end = ADM5120_PCICFG_ADDR-1,
+ .flags = IORESOURCE_IO
+};
+
+struct resource pci_mem_resource = {
+ .name = "ADM5120 PCI MEM",
+ .start = ADM5120_PCIMEM_BASE,
+ .end = ADM5120_PCIIO_BASE-1,
+ .flags = IORESOURCE_MEM
+};
+
+static struct pci_controller adm5120_controller = {
+ .pci_ops = &adm5120_pci_ops,
+ .io_resource = &pci_io_resource,
+ .mem_resource = &pci_mem_resource,
+};
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (slot < 2 || slot > 4)
+ return -1;
+ return slot + 4;
+}
+
+static void adm5120_pci_fixup(struct pci_dev *dev)
+{
+ if (dev->devfn == 0) {
+ pci_write_config_word(dev, PCI_COMMAND, PCI_CMM_DEF);
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+ PCI_DEF_CACHE_LINE_SZ);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, adm5120_pci_fixup);
+
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+static int __init adm5120_pci_setup(void)
+{
+ int pci_bios;
+
+ pci_bios = adm5120_has_pci();
+
+ printk("adm5120: system has %sPCI BIOS\n", pci_bios ? "" : "no ");
+ if (pci_bios == 0)
+ return 1;
+
+ /* Avoid ISA compat ranges. */
+ PCIBIOS_MIN_IO = 0x00000000;
+ PCIBIOS_MIN_MEM = 0x00000000;
+
+ /* Set I/O resource limits. */
+ ioport_resource.end = 0x1fffffff;
+ iomem_resource.end = 0xffffffff;
+
+ register_pci_controller(&adm5120_controller);
+ return 0;
+}
+
+subsys_initcall(adm5120_pci_setup);
--- /dev/null
+/*
+ * ADM5120 LED (GPIO) driver
+ *
+ * Copyright (C) Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ */
+
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+
+#define LED_MINOR 151
+#define GPIO_IO ((unsigned long *)0xb20000b8)
+
+static ssize_t adm5120_led_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ unsigned char val;
+
+ if (!len || get_user(val, data))
+ return -EFAULT;
+ *GPIO_IO=(*GPIO_IO & 0x00ffffff) | (val<<24);
+ return 1;
+}
+
+static struct file_operations adm5120_led_fops = {
+ .owner = THIS_MODULE,
+ .write = adm5120_led_write,
+};
+
+static struct miscdevice adm5120_led_device = {
+ LED_MINOR,
+ "led",
+ &adm5120_led_fops,
+};
+
+static int __init adm5120_led_init(void)
+{
+ printk(KERN_INFO "ADM5120 LED & GPIO driver\n");
+ if (misc_register(&adm5120_led_device)) {
+ printk(KERN_WARNING "Couldn't register device %d\n", LED_MINOR);
+ return -EBUSY;
+ }
+ return 0;
+}
+
+static void __exit adm5120_led_exit(void)
+{
+ misc_deregister(&adm5120_led_device);
+}
+
+module_init(adm5120_led_init);
+module_exit(adm5120_led_exit);
+
+MODULE_DESCRIPTION("ADM5120 LED and GPIO driver");
+MODULE_AUTHOR("Jeroen Vreeken");
+MODULE_LICENSE("GPL");
--- /dev/null
+#include <linux/init.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/bootinfo.h>
+#ifdef CONFIG_MIPS_ADM5120
+#include <asm/mach-adm5120/adm5120_defs.h>
+#endif
+
+#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000))
+
+#define GPIOF 0x050000
+#define GPIOC 0x050004
+#define GPIOD 0x050008
+
+#define GPIO_RDY (1 << 0x08)
+#define GPIO_WPX (1 << 0x09)
+#define GPIO_ALE (1 << 0x0a)
+#define GPIO_CLE (1 << 0x0b)
+
+#define DEV2BASE 0x010020
+
+#define LO_WPX (1 << 0)
+#define LO_ALE (1 << 1)
+#define LO_CLE (1 << 2)
+#define LO_CEX (1 << 3)
+#define LO_FOFF (1 << 5)
+#define LO_SPICS (1 << 6)
+#define LO_ULED (1 << 7)
+
+#define MEM32(x) *((volatile unsigned *) (x))
+
+
+/* RouterBoard RB1xx specific definitions */
+#define SMEM1(x) (*((volatile unsigned char *) (KSEG1ADDR(ADM5120_SRAM1_BASE) + x)))
+
+#define NAND_RW_REG 0x0 //data register
+#define NAND_SET_CEn 0x1 //CE# low
+#define NAND_CLR_CEn 0x2 //CE# high
+#define NAND_CLR_CLE 0x3 //CLE low
+#define NAND_SET_CLE 0x4 //CLE high
+#define NAND_CLR_ALE 0x5 //ALE low
+#define NAND_SET_ALE 0x6 //ALE high
+#define NAND_SET_SPn 0x7 //SP# low (use spare area)
+#define NAND_CLR_SPn 0x8 //SP# high (do not use spare area)
+#define NAND_SET_WPn 0x9 //WP# low
+#define NAND_CLR_WPn 0xA //WP# high
+#define NAND_STS_REG 0xB //Status register
+
+static void __iomem *p_nand;
+
+#ifdef CONFIG_MIKROTIK_RB500
+extern void changeLatchU5(unsigned char orMask, unsigned char nandMask);
+
+static int rb500_dev_ready(struct mtd_info *mtd)
+{
+ return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
+}
+
+/*
+ * hardware specific access to control-lines
+ *
+ * ctrl:
+ * NAND_CLE: bit 2 -> bit 3
+ * NAND_ALE: bit 3 -> bit 2
+ */
+static void rbmips_hwcontrol500(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ unsigned char orbits, nandbits;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+
+ orbits = (ctrl & NAND_CLE) << 1;
+ orbits |= (ctrl & NAND_ALE) >> 1;
+
+ nandbits = (~ctrl & NAND_CLE) << 1;
+ nandbits |= (~ctrl & NAND_ALE) >> 1;
+
+ changeLatchU5(orbits, nandbits);
+ }
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
+
+}
+#endif
+
+#ifdef CONFIG_MIPS_ADM5120
+static int rb100_dev_ready(struct mtd_info *mtd)
+{
+ return SMEM1(NAND_STS_REG) & 0x80; /* found out by experiment */
+}
+
+static void rbmips_hwcontrol100(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE)
+ SMEM1(ctrl) = 0x01;
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
+}
+#endif
+
+
+static struct mtd_partition partition_info[] = {
+ {
+ name:"RouterBoard NAND Boot",
+ offset:0,
+ size:4 * 1024 * 1024},
+ {
+ name:"RouterBoard NAND Main",
+ offset:MTDPART_OFS_NXTBLK,
+ size:MTDPART_SIZ_FULL}
+};
+
+static struct mtd_info rmtd;
+static struct nand_chip rnand;
+
+static unsigned init_ok = 0;
+
+unsigned get_rbnand_block_size(void)
+{
+ if (init_ok)
+ return rmtd.writesize;
+ else
+ return 0;
+}
+
+EXPORT_SYMBOL(get_rbnand_block_size);
+
+int __init rbmips_init(void)
+{
+ memset(&rmtd, 0, sizeof(rmtd));
+ memset(&rnand, 0, sizeof(rnand));
+
+#ifdef CONFIG_MIKROTIK_RB500
+ printk("RB500 nand\n");
+ changeLatchU5(LO_WPX | LO_FOFF | LO_CEX,
+ LO_ULED | LO_ALE | LO_CLE);
+ rnand.cmd_ctrl = rbmips_hwcontrol500;
+
+ rnand.dev_ready = rb500_dev_ready;
+ rnand.IO_ADDR_W = (unsigned char *)
+ KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE));
+ rnand.IO_ADDR_R = rnand.IO_ADDR_W;
+#endif
+
+#ifdef CONFIG_MIPS_ADM5120
+ printk("RB100 nand\n");
+ /* enable NAND flash */
+ MEM32(0xB2000064) = 0x100;
+ /* boot done */
+ MEM32(0xB2000008) = 0x1;
+ SMEM1(NAND_SET_SPn) = 0x01;
+ SMEM1(NAND_CLR_WPn) = 0x01;
+ rnand.IO_ADDR_R = (unsigned char *)KSEG1ADDR(ADM5120_SRAM1_BASE);
+ rnand.IO_ADDR_W = rnand.IO_ADDR_R;
+ rnand.cmd_ctrl = rbmips_hwcontrol100;
+ rnand.dev_ready = rb100_dev_ready;
+#endif
+ p_nand = (void __iomem *) ioremap((void *) 0x18a20000, 0x1000);
+ if (!p_nand) {
+ printk("RBnand Unable ioremap buffer");
+ return -ENXIO;
+ }
+ rnand.ecc.mode = NAND_ECC_SOFT;
+ rnand.chip_delay = 25;
+ rnand.options |= NAND_NO_AUTOINCR;
+ rmtd.priv = &rnand;
+
+#ifdef CONFIG_MIKROTIK_RB500
+ int *b;
+
+ b = (int *) KSEG1ADDR(0x18010020);
+ printk("dev2base 0x%08x mask 0x%08x c 0x%08x tc 0x%08x\n", b[0],
+ b[1], b[2], b[3]);
+#endif
+
+ if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)
+ && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
+ printk("RBxxx nand device not found");
+ iounmap((void *) p_nand);
+ return -ENXIO;
+ }
+
+ add_mtd_partitions(&rmtd, partition_info, 2);
+ init_ok = 1;
+ return 0;
+}
+
+module_init(rbmips_init);
--- /dev/null
+/*
+ * ADM5120 built in ethernet switch driver
+ *
+ * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ *
+ * Inspiration for this driver came from the original ADMtek 2.4
+ * driver, Copyright ADMtek Inc.
+ */
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <asm/mipsregs.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include "adm5120sw.h"
+
+#include "adm5120_info.h"
+
+MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
+MODULE_DESCRIPTION("ADM5120 ethernet switch driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * The ADM5120 uses an internal matrix to determine which ports
+ * belong to which VLAN.
+ * The default generates a VLAN (and device) for each port
+ * (including MII port) and the CPU port is part of all of them.
+ *
+ * Another example, one big switch and everything mapped to eth0:
+ * 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00
+ */
+static unsigned char vlan_matrix[SW_DEVS] = {
+ 0x41, 0x42, 0x44, 0x48, 0x50, 0x60
+};
+
+static int adm5120_nrdevs;
+
+static struct net_device *adm5120_devs[SW_DEVS];
+static struct adm5120_dma
+ adm5120_dma_txh_v[ADM5120_DMA_TXH] __attribute__((aligned(16))),
+ adm5120_dma_txl_v[ADM5120_DMA_TXL] __attribute__((aligned(16))),
+ adm5120_dma_rxh_v[ADM5120_DMA_RXH] __attribute__((aligned(16))),
+ adm5120_dma_rxl_v[ADM5120_DMA_RXL] __attribute__((aligned(16))),
+ *adm5120_dma_txh,
+ *adm5120_dma_txl,
+ *adm5120_dma_rxh,
+ *adm5120_dma_rxl;
+static struct sk_buff
+ *adm5120_skb_rxh[ADM5120_DMA_RXH],
+ *adm5120_skb_rxl[ADM5120_DMA_RXL],
+ *adm5120_skb_txh[ADM5120_DMA_TXH],
+ *adm5120_skb_txl[ADM5120_DMA_TXL];
+static int adm5120_rxhi = 0;
+static int adm5120_rxli = 0;
+/* We don't use high priority tx for now */
+/*static int adm5120_txhi = 0;*/
+static int adm5120_txli = 0;
+static int adm5120_txhit = 0;
+static int adm5120_txlit = 0;
+static int adm5120_if_open = 0;
+
+static inline void adm5120_set_reg(unsigned int reg, unsigned long val)
+{
+ *(volatile unsigned long*)(SW_BASE+reg) = val;
+}
+
+static inline unsigned long adm5120_get_reg(unsigned int reg)
+{
+ return *(volatile unsigned long*)(SW_BASE+reg);
+}
+
+static inline void adm5120_rxfixup(struct adm5120_dma *dma,
+ struct sk_buff **skbl, int num)
+{
+ int i;
+
+ /* Resubmit the entire ring */
+ for (i=0; i<num; i++) {
+ dma[i].status = 0;
+ dma[i].cntl = 0;
+ dma[i].len = ADM5120_DMA_RXSIZE;
+ dma[i].data = ADM5120_DMA_ADDR(skbl[i]->data) |
+ ADM5120_DMA_OWN | (i==num-1 ? ADM5120_DMA_RINGEND : 0);
+ }
+}
+
+static inline void adm5120_rx(struct adm5120_dma *dma, struct sk_buff **skbl,
+ int *index, int num)
+{
+ struct sk_buff *skb, *skbn;
+ struct adm5120_sw *priv;
+ struct net_device *dev;
+ int port, vlan, len;
+
+ while (!(dma[*index].data & ADM5120_DMA_OWN)) {
+ port = (dma[*index].status & ADM5120_DMA_PORTID);
+ port >>= ADM5120_DMA_PORTSHIFT;
+ for (vlan = 0; vlan < adm5120_nrdevs; vlan++) {
+ if ((1<<port) & vlan_matrix[vlan])
+ break;
+ }
+ if (vlan == adm5120_nrdevs)
+ vlan = 0;
+ dev = adm5120_devs[vlan];
+ skb = skbl[*index];
+ len = (dma[*index].status & ADM5120_DMA_LEN);
+ len >>= ADM5120_DMA_LENSHIFT;
+ len -= ETH_FCS;
+
+ priv = netdev_priv(dev);
+ if (len <= 0 || len > ADM5120_DMA_RXSIZE ||
+ dma[*index].status & ADM5120_DMA_FCSERR) {
+ priv->stats.rx_errors++;
+ skbn = NULL;
+ } else {
+ skbn = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
+ if (skbn) {
+ skb_put(skb, len);
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ dev->last_rx = jiffies;
+ priv->stats.rx_packets++;
+ priv->stats.rx_bytes+=len;
+ skb_reserve(skbn, 2);
+ skbl[*index] = skbn;
+ } else {
+ printk(KERN_INFO "%s recycling!\n", dev->name);
+ }
+ }
+
+ dma[*index].status = 0;
+ dma[*index].cntl = 0;
+ dma[*index].len = ADM5120_DMA_RXSIZE;
+ dma[*index].data = ADM5120_DMA_ADDR(skbl[*index]->data) |
+ ADM5120_DMA_OWN |
+ (num-1==*index ? ADM5120_DMA_RINGEND : 0);
+ if (num == ++*index)
+ *index = 0;
+ if (skbn)
+ netif_rx(skb);
+ }
+}
+
+static inline void adm5120_tx(struct adm5120_dma *dma, struct sk_buff **skbl,
+ int *index, int num)
+{
+ while((dma[*index].data & ADM5120_DMA_OWN) == 0 && skbl[*index]) {
+ dev_kfree_skb_irq(skbl[*index]);
+ skbl[*index] = NULL;
+ if (++*index == num)
+ *index = 0;
+ }
+}
+
+static irqreturn_t adm5120_sw_irq(int irq, void *dev_id)
+{
+ unsigned long intreg;
+
+ adm5120_set_reg(ADM5120_INT_MASK,
+ adm5120_get_reg(ADM5120_INT_MASK) | ADM5120_INTHANDLE);
+
+ intreg = adm5120_get_reg(ADM5120_INT_ST);
+ adm5120_set_reg(ADM5120_INT_ST, intreg);
+
+ if (intreg & ADM5120_INT_RXH)
+ adm5120_rx(adm5120_dma_rxh, adm5120_skb_rxh, &adm5120_rxhi,
+ ADM5120_DMA_RXH);
+ if (intreg & ADM5120_INT_HFULL)
+ adm5120_rxfixup(adm5120_dma_rxh, adm5120_skb_rxh,
+ ADM5120_DMA_RXH);
+ if (intreg & ADM5120_INT_RXL)
+ adm5120_rx(adm5120_dma_rxl, adm5120_skb_rxl, &adm5120_rxli,
+ ADM5120_DMA_RXL);
+ if (intreg & ADM5120_INT_LFULL)
+ adm5120_rxfixup(adm5120_dma_rxl, adm5120_skb_rxl,
+ ADM5120_DMA_RXL);
+ if (intreg & ADM5120_INT_TXH)
+ adm5120_tx(adm5120_dma_txh, adm5120_skb_txh, &adm5120_txhit,
+ ADM5120_DMA_TXH);
+ if (intreg & ADM5120_INT_TXL)
+ adm5120_tx(adm5120_dma_txl, adm5120_skb_txl, &adm5120_txlit,
+ ADM5120_DMA_TXL);
+
+ adm5120_set_reg(ADM5120_INT_MASK,
+ adm5120_get_reg(ADM5120_INT_MASK) & ~ADM5120_INTHANDLE);
+
+ return IRQ_HANDLED;
+}
+
+static void adm5120_set_vlan(char *matrix)
+{
+ unsigned long val;
+
+ val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
+ adm5120_set_reg(ADM5120_VLAN_GI, val);
+ val = matrix[4] + (matrix[5]<<8);
+ adm5120_set_reg(ADM5120_VLAN_GII, val);
+}
+
+static int adm5120_sw_open(struct net_device *dev)
+{
+ if (!adm5120_if_open++)
+ adm5120_set_reg(ADM5120_INT_MASK,
+ adm5120_get_reg(ADM5120_INT_MASK) & ~ADM5120_INTHANDLE);
+ netif_start_queue(dev);
+ return 0;
+}
+
+static int adm5120_sw_stop(struct net_device *dev)
+{
+ netif_stop_queue(dev);
+ if (!--adm5120_if_open)
+ adm5120_set_reg(ADM5120_INT_MASK,
+ adm5120_get_reg(ADM5120_INT_MASK) | ADM5120_INTMASKALL);
+ return 0;
+}
+
+static int adm5120_sw_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct adm5120_dma *dma = adm5120_dma_txl;
+ struct sk_buff **skbl = adm5120_skb_txl;
+ struct adm5120_sw *priv = netdev_priv(dev);
+ int *index = &adm5120_txli;
+ int num = ADM5120_DMA_TXL;
+ int trigger = ADM5120_SEND_TRIG_L;
+
+ dev->trans_start = jiffies;
+ if (dma[*index].data & ADM5120_DMA_OWN) {
+ dev_kfree_skb(skb);
+ priv->stats.tx_dropped++;
+ return 0;
+ }
+
+ dma[*index].data = ADM5120_DMA_ADDR(skb->data) | ADM5120_DMA_OWN;
+ if (*index == num-1)
+ dma[*index].data |= ADM5120_DMA_RINGEND;
+ dma[*index].status =
+ ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << ADM5120_DMA_LENSHIFT) |
+ (0x1 << priv->port);
+ dma[*index].len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+ priv->stats.tx_packets++;
+ priv->stats.tx_bytes += skb->len;
+ skbl[*index]=skb;
+
+ if (++*index == num)
+ *index = 0;
+ adm5120_set_reg(ADM5120_SEND_TRIG, trigger);
+
+ return 0;
+}
+
+static void adm5120_tx_timeout(struct net_device *dev)
+{
+ netif_wake_queue(dev);
+}
+
+static struct net_device_stats *adm5120_sw_stats(struct net_device *dev)
+{
+ return &((struct adm5120_sw *)netdev_priv(dev))->stats;
+}
+
+static void adm5120_set_multicast_list(struct net_device *dev)
+{
+ struct adm5120_sw *priv = netdev_priv(dev);
+ int portmask;
+
+ portmask = vlan_matrix[priv->port] & 0x3f;
+
+ if (dev->flags & IFF_PROMISC)
+ adm5120_set_reg(ADM5120_CPUP_CONF,
+ adm5120_get_reg(ADM5120_CPUP_CONF) &
+ ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL));
+ else
+ adm5120_set_reg(ADM5120_CPUP_CONF,
+ adm5120_get_reg(ADM5120_CPUP_CONF) |
+ (portmask << ADM5120_DISUNSHIFT));
+
+ if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
+ dev->mc_count)
+ adm5120_set_reg(ADM5120_CPUP_CONF,
+ adm5120_get_reg(ADM5120_CPUP_CONF) &
+ ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL));
+ else
+ adm5120_set_reg(ADM5120_CPUP_CONF,
+ adm5120_get_reg(ADM5120_CPUP_CONF) |
+ (portmask << ADM5120_DISMCSHIFT));
+}
+
+static void adm5120_write_mac(struct net_device *dev)
+{
+ struct adm5120_sw *priv = netdev_priv(dev);
+ unsigned char *mac = dev->dev_addr;
+
+ adm5120_set_reg(ADM5120_MAC_WT1,
+ mac[2] | (mac[3]<<8) | (mac[4]<<16) | (mac[5]<<24));
+ adm5120_set_reg(ADM5120_MAC_WT0, (priv->port<<3) |
+ (mac[0]<<16) | (mac[1]<<24) | ADM5120_MAC_WRITE | ADM5120_VLAN_EN);
+
+ while (!(adm5120_get_reg(ADM5120_MAC_WT0) & ADM5120_MAC_WRITE_DONE));
+}
+
+static int adm5120_sw_set_mac_address(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ adm5120_write_mac(dev);
+ return 0;
+}
+
+static int adm5120_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ int err;
+ struct adm5120_sw_info info;
+ struct adm5120_sw *priv = netdev_priv(dev);
+
+ switch(cmd) {
+ case SIOCGADMINFO:
+ info.magic = 0x5120;
+ info.ports = adm5120_nrdevs;
+ info.vlan = priv->port;
+ err = copy_to_user(rq->ifr_data, &info, sizeof(info));
+ if (err)
+ return -EFAULT;
+ break;
+ case SIOCSMATRIX:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ err = copy_from_user(vlan_matrix, rq->ifr_data,
+ sizeof(vlan_matrix));
+ if (err)
+ return -EFAULT;
+ adm5120_set_vlan(vlan_matrix);
+ break;
+ case SIOCGMATRIX:
+ err = copy_to_user(rq->ifr_data, vlan_matrix,
+ sizeof(vlan_matrix));
+ if (err)
+ return -EFAULT;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+static void adm5120_dma_tx_init(struct adm5120_dma *dma, struct sk_buff **skb,
+ int num)
+{
+ memset(dma, 0, sizeof(struct adm5120_dma)*num);
+ dma[num-1].data |= ADM5120_DMA_RINGEND;
+ memset(skb, 0, sizeof(struct skb*)*num);
+}
+
+static void adm5120_dma_rx_init(struct adm5120_dma *dma, struct sk_buff **skb,
+ int num)
+{
+ int i;
+
+ memset(dma, 0, sizeof(struct adm5120_dma)*num);
+ for (i=0; i<num; i++) {
+ skb[i] = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
+ if (!skb[i]) {
+ i=num;
+ break;
+ }
+ skb_reserve(skb[i], 2);
+ dma[i].data = ADM5120_DMA_ADDR(skb[i]->data) | ADM5120_DMA_OWN;
+ dma[i].cntl = 0;
+ dma[i].len = ADM5120_DMA_RXSIZE;
+ dma[i].status = 0;
+ }
+ dma[i-1].data |= ADM5120_DMA_RINGEND;
+}
+
+static int __init adm5120_sw_init(void)
+{
+ int i, err;
+ struct net_device *dev;
+
+ err = request_irq(SW_IRQ, adm5120_sw_irq, 0, "ethernet switch", NULL);
+ if (err)
+ goto out;
+
+ /* MII port? */
+ if (adm5120_get_reg(ADM5120_CODE) & ADM5120_CODE_PQFP)
+ adm5120_nrdevs = 5;
+ /* CFE based devices only have two enet ports */
+ else if (adm5120_info.boot_loader == BOOT_LOADER_CFE)
+ adm5120_nrdevs = 2;
+ else
+ adm5120_nrdevs = 6;
+
+ adm5120_set_reg(ADM5120_CPUP_CONF,
+ ADM5120_DISCCPUPORT | ADM5120_CRC_PADDING |
+ ADM5120_DISUNALL | ADM5120_DISMCALL);
+ adm5120_set_reg(ADM5120_PORT_CONF0, ADM5120_ENMC | ADM5120_ENBP);
+
+ adm5120_set_reg(ADM5120_PHY_CNTL2, adm5120_get_reg(ADM5120_PHY_CNTL2) |
+ ADM5120_AUTONEG | ADM5120_NORMAL | ADM5120_AUTOMDIX);
+ adm5120_set_reg(ADM5120_PHY_CNTL3, adm5120_get_reg(ADM5120_PHY_CNTL3) |
+ ADM5120_PHY_NTH);
+
+ adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL);
+ adm5120_set_reg(ADM5120_INT_ST, ADM5120_INTMASKALL);
+
+ adm5120_dma_txh = (void *)KSEG1ADDR((u32)adm5120_dma_txh_v);
+ adm5120_dma_txl = (void *)KSEG1ADDR((u32)adm5120_dma_txl_v);
+ adm5120_dma_rxh = (void *)KSEG1ADDR((u32)adm5120_dma_rxh_v);
+ adm5120_dma_rxl = (void *)KSEG1ADDR((u32)adm5120_dma_rxl_v);
+
+ adm5120_dma_tx_init(adm5120_dma_txh, adm5120_skb_txh, ADM5120_DMA_TXH);
+ adm5120_dma_tx_init(adm5120_dma_txl, adm5120_skb_txl, ADM5120_DMA_TXL);
+ adm5120_dma_rx_init(adm5120_dma_rxh, adm5120_skb_rxh, ADM5120_DMA_RXH);
+ adm5120_dma_rx_init(adm5120_dma_rxl, adm5120_skb_rxl, ADM5120_DMA_RXL);
+ adm5120_set_reg(ADM5120_SEND_HBADDR, KSEG1ADDR(adm5120_dma_txh));
+ adm5120_set_reg(ADM5120_SEND_LBADDR, KSEG1ADDR(adm5120_dma_txl));
+ adm5120_set_reg(ADM5120_RECEIVE_HBADDR, KSEG1ADDR(adm5120_dma_rxh));
+ adm5120_set_reg(ADM5120_RECEIVE_LBADDR, KSEG1ADDR(adm5120_dma_rxl));
+
+ adm5120_set_vlan(vlan_matrix);
+
+ for (i=0; i<adm5120_nrdevs; i++) {
+ adm5120_devs[i] = alloc_etherdev(sizeof(struct adm5120_sw));
+ if (!adm5120_devs[i]) {
+ err = -ENOMEM;
+ goto out_int;
+ }
+
+ dev = adm5120_devs[i];
+ SET_MODULE_OWNER(dev);
+ memset(netdev_priv(dev), 0, sizeof(struct adm5120_sw));
+ ((struct adm5120_sw*)netdev_priv(dev))->port = i;
+ dev->base_addr = SW_BASE;
+ dev->irq = SW_IRQ;
+ dev->open = adm5120_sw_open;
+ dev->hard_start_xmit = adm5120_sw_tx;
+ dev->stop = adm5120_sw_stop;
+ dev->get_stats = adm5120_sw_stats;
+ dev->set_multicast_list = adm5120_set_multicast_list;
+ dev->do_ioctl = adm5120_do_ioctl;
+ dev->tx_timeout = adm5120_tx_timeout;
+ dev->watchdog_timeo = ETH_TX_TIMEOUT;
+ dev->set_mac_address = adm5120_sw_set_mac_address;
+ /* HACK alert!!! In the original admtek driver it is asumed
+ that you can read the MAC addressess from flash, but edimax
+ decided to leave that space intentionally blank...
+ */
+ memcpy(dev->dev_addr, "\x00\x50\xfc\x11\x22\x01", 6);
+ dev->dev_addr[5] += i;
+ adm5120_write_mac(dev);
+
+ if ((err = register_netdev(dev))) {
+ free_netdev(dev);
+ goto out_int;
+ }
+ printk(KERN_INFO "%s: ADM5120 switch port%d\n", dev->name, i);
+ }
+ adm5120_set_reg(ADM5120_CPUP_CONF,
+ ADM5120_CRC_PADDING | ADM5120_DISUNALL | ADM5120_DISMCALL);
+
+ return 0;
+
+out_int:
+ /* Undo everything that did succeed */
+ for (; i; i--) {
+ unregister_netdev(adm5120_devs[i-1]);
+ free_netdev(adm5120_devs[i-1]);
+ }
+ free_irq(SW_IRQ, NULL);
+out:
+ printk(KERN_ERR "ADM5120 Ethernet switch init failed\n");
+ return err;
+}
+
+static void __exit adm5120_sw_exit(void)
+{
+ int i;
+
+ for (i = 0; i < adm5120_nrdevs; i++) {
+ unregister_netdev(adm5120_devs[i]);
+ free_netdev(adm5120_devs[i-1]);
+ }
+
+ free_irq(SW_IRQ, NULL);
+
+ for (i = 0; i < ADM5120_DMA_RXH; i++) {
+ if (!adm5120_skb_rxh[i])
+ break;
+ kfree_skb(adm5120_skb_rxh[i]);
+ }
+ for (i = 0; i < ADM5120_DMA_RXL; i++) {
+ if (!adm5120_skb_rxl[i])
+ break;
+ kfree_skb(adm5120_skb_rxl[i]);
+ }
+}
+
+module_init(adm5120_sw_init);
+module_exit(adm5120_sw_exit);
--- /dev/null
+/*
+ * Defines for ADM5120 built in ethernet switch driver
+ *
+ * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ *
+ * Values come from ADM5120 datasheet and original ADMtek 2.4 driver,
+ * Copyright ADMtek Inc.
+ */
+
+#ifndef _INCLUDE_ADM5120SW_H_
+#define _INCLUDE_ADM5120SW_H_
+
+#define SW_BASE KSEG1ADDR(0x12000000)
+#define SW_DEVS 6
+#define SW_IRQ 9
+
+#define ETH_TX_TIMEOUT HZ/4
+#define ETH_FCS 4;
+
+#define ADM5120_CODE 0x00 /* CPU description */
+#define ADM5120_CODE_PQFP 0x20000000 /* package type */
+#define ADM5120_CPUP_CONF 0x24 /* CPU port config */
+#define ADM5120_DISCCPUPORT 0x00000001 /* disable cpu port */
+#define ADM5120_CRC_PADDING 0x00000002 /* software crc */
+#define ADM5120_DISUNSHIFT 9
+#define ADM5120_DISUNALL 0x00007e00 /* disable unknown from all */
+#define ADM5120_DISMCSHIFT 16
+#define ADM5120_DISMCALL 0x003f0000 /* disable multicast from all */
+#define ADM5120_PORT_CONF0 0x28
+#define ADM5120_ENMC 0x00003f00 /* Enable MC routing (ex cpu) */
+#define ADM5120_ENBP 0x003f0000 /* Enable Back Pressure */
+#define ADM5120_VLAN_GI 0x40 /* VLAN settings */
+#define ADM5120_VLAN_GII 0x44
+#define ADM5120_SEND_TRIG 0x48
+#define ADM5120_SEND_TRIG_L 0x00000001
+#define ADM5120_SEND_TRIG_H 0x00000002
+#define ADM5120_MAC_WT0 0x58
+#define ADM5120_MAC_WRITE 0x00000001
+#define ADM5120_MAC_WRITE_DONE 0x00000002
+#define ADM5120_VLAN_EN 0x00000040
+#define ADM5120_MAC_WT1 0x5c
+#define ADM5120_PHY_CNTL2 0x7c
+#define ADM5120_AUTONEG 0x0000001f /* Auto negotiate */
+#define ADM5120_NORMAL 0x01f00000 /* PHY normal mode */
+#define ADM5120_AUTOMDIX 0x3e000000 /* Auto MDIX */
+#define ADM5120_PHY_CNTL3 0x80
+#define ADM5120_PHY_NTH 0x00000400
+#define ADM5120_INT_ST 0xb0
+#define ADM5120_INT_RXH 0x0000004
+#define ADM5120_INT_RXL 0x0000008
+#define ADM5120_INT_HFULL 0x0000010
+#define ADM5120_INT_LFULL 0x0000020
+#define ADM5120_INT_TXH 0x0000001
+#define ADM5120_INT_TXL 0x0000002
+#define ADM5120_INT_MASK 0xb4
+#define ADM5120_INTMASKALL 0x1FDEFFF /* All interrupts */
+#define ADM5120_INTHANDLE (ADM5120_INT_RXH | ADM5120_INT_RXL | \
+ ADM5120_INT_HFULL | ADM5120_INT_LFULL | \
+ ADM5120_INT_TXH | ADM5120_INT_TXL)
+#define ADM5120_SEND_HBADDR 0xd0
+#define ADM5120_SEND_LBADDR 0xd4
+#define ADM5120_RECEIVE_HBADDR 0xd8
+#define ADM5120_RECEIVE_LBADDR 0xdc
+
+struct adm5120_dma {
+ u32 data;
+ u32 cntl;
+ u32 len;
+ u32 status;
+} __attribute__ ((packed));
+
+#define ADM5120_DMA_MASK 0x01ffffff
+#define ADM5120_DMA_OWN 0x80000000 /* buffer owner */
+#define ADM5120_DMA_RINGEND 0x10000000 /* Last in DMA ring */
+
+#define ADM5120_DMA_ADDR(ptr) ((u32)(ptr) & ADM5120_DMA_MASK)
+#define ADM5120_DMA_PORTID 0x00007000
+#define ADM5120_DMA_PORTSHIFT 12
+#define ADM5120_DMA_LEN 0x07ff0000
+#define ADM5120_DMA_LENSHIFT 16
+#define ADM5120_DMA_FCSERR 0x00000008
+
+#define ADM5120_DMA_TXH 16
+#define ADM5120_DMA_TXL 64
+#define ADM5120_DMA_RXH 16
+#define ADM5120_DMA_RXL 8
+
+#define ADM5120_DMA_RXSIZE 1550
+#define ADM5120_DMA_EXTRA 20
+
+struct adm5120_sw {
+ int port;
+ struct net_device_stats stats;
+};
+
+#define SIOCSMATRIX SIOCDEVPRIVATE
+#define SIOCGMATRIX SIOCDEVPRIVATE+1
+#define SIOCGADMINFO SIOCDEVPRIVATE+2
+
+struct adm5120_sw_info {
+ u16 magic;
+ u16 ports;
+ u16 vlan;
+};
+
+#endif /* _INCLUDE_ADM5120SW_H_ */
--- /dev/null
+/*
+ * Serial driver for ADM5120 SoC
+ *
+ * Derived from drivers/serial/uart00.c
+ * Copyright 2001 Altera Corporation
+ *
+ * Some pieces are derived from the ADMtek 2.4 serial driver.
+ * Copyright (C) ADMtek Incorporated, 2003
+ * daniell@admtek.com.tw
+ * Which again was derived from drivers/char/serial.c
+ * Copyright (C) Linus Torvalds et al.
+ *
+ * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/console.h>
+
+#define ADM5120_UART_BASE0 0x12600000
+#define ADM5120_UART_BASE1 0x12800000
+#define ADM5120_UART_SIZE 0x20
+
+#define ADM5120_UART_IRQ0 1
+#define ADM5120_UART_IRQ1 2
+
+#define ADM5120_UART_REG(base, reg) \
+ (*(volatile u32 *)KSEG1ADDR((base)+(reg)))
+
+#define ADM5120_UARTCLK_FREQ 62500000
+#define ADM5120_UART_BAUDDIV(rate) ((unsigned long)(ADM5120_UARTCLK_FREQ/(16*(rate)) - 1))
+
+#define ADM5120_UART_BAUD115200 ADM5120_UART_BAUDDIV(115200)
+
+#define ADM5120_UART_DATA 0x00
+#define ADM5120_UART_RS 0x04
+#define ADM5120_UART_LCR_H 0x08
+#define ADM5120_UART_LCR_M 0x0c
+#define ADM5120_UART_LCR_L 0x10
+#define ADM5120_UART_CR 0x14
+#define ADM5120_UART_FR 0x18
+#define ADM5120_UART_IR 0x1c
+
+#define ADM5120_UART_FE 0x01
+#define ADM5120_UART_PE 0x02
+#define ADM5120_UART_BE 0x04
+#define ADM5120_UART_OE 0x08
+#define ADM5120_UART_ERR 0x0f
+#define ADM5120_UART_FIFO_EN 0x10
+#define ADM5120_UART_EN 0x01
+#define ADM5120_UART_TIE 0x20
+#define ADM5120_UART_RIE 0x50
+#define ADM5120_UART_IE 0x78
+#define ADM5120_UART_CTS 0x01
+#define ADM5120_UART_DSR 0x02
+#define ADM5120_UART_DCD 0x04
+#define ADM5120_UART_TXFF 0x20
+#define ADM5120_UART_TXFE 0x80
+#define ADM5120_UART_RXFE 0x10
+#define ADM5120_UART_BRK 0x01
+#define ADM5120_UART_PEN 0x02
+#define ADM5120_UART_EPS 0x04
+#define ADM5120_UART_STP2 0x08
+#define ADM5120_UART_W5 0x00
+#define ADM5120_UART_W6 0x20
+#define ADM5120_UART_W7 0x40
+#define ADM5120_UART_W8 0x60
+#define ADM5120_UART_MIS 0x01
+#define ADM5120_UART_RIS 0x02
+#define ADM5120_UART_TIS 0x04
+#define ADM5120_UART_RTIS 0x08
+
+static void adm5120ser_stop_tx(struct uart_port *port)
+{
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_TIE;
+}
+
+static void adm5120ser_irq_rx(struct uart_port *port)
+{
+ struct tty_struct *tty = port->info->tty;
+ unsigned int status, ch, rds, flg, ignored = 0;
+
+ status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+ while (!(status & ADM5120_UART_RXFE)) {
+ /*
+ * We need to read rds before reading the
+ * character from the fifo
+ */
+ rds = ADM5120_UART_REG(port->iobase, ADM5120_UART_RS);
+ ch = ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA);
+ port->icount.rx++;
+
+ if (tty->low_latency)
+ tty_flip_buffer_push(tty);
+
+ flg = TTY_NORMAL;
+
+ /*
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ if (rds & ADM5120_UART_ERR)
+ goto handle_error;
+ if (uart_handle_sysrq_char(port, ch))
+ goto ignore_char;
+
+ error_return:
+ tty_insert_flip_char(tty, ch, flg);
+
+ ignore_char:
+ status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+ }
+ out:
+ tty_flip_buffer_push(tty);
+ return;
+
+ handle_error:
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_RS) = 0xff;
+ if (rds & ADM5120_UART_BE) {
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ goto ignore_char;
+ } else if (rds & ADM5120_UART_PE)
+ port->icount.parity++;
+ else if (rds & ADM5120_UART_FE)
+ port->icount.frame++;
+ if (rds & ADM5120_UART_OE)
+ port->icount.overrun++;
+
+ if (rds & port->ignore_status_mask) {
+ if (++ignored > 100)
+ goto out;
+ goto ignore_char;
+ }
+ rds &= port->read_status_mask;
+
+ if (rds & ADM5120_UART_BE)
+ flg = TTY_BREAK;
+ else if (rds & ADM5120_UART_PE)
+ flg = TTY_PARITY;
+ else if (rds & ADM5120_UART_FE)
+ flg = TTY_FRAME;
+
+ if (rds & ADM5120_UART_OE) {
+ /*
+ * CHECK: does overrun affect the current character?
+ * ASSUMPTION: it does not.
+ */
+ tty_insert_flip_char(tty, ch, flg);
+ ch = 0;
+ flg = TTY_OVERRUN;
+ }
+#ifdef CONFIG_MAGIC_SYSRQ
+ port->sysrq = 0;
+#endif
+ goto error_return;
+}
+
+static void adm5120ser_irq_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+ int count;
+
+ if (port->x_char) {
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
+ port->x_char;
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ adm5120ser_stop_tx(port);
+ return;
+ }
+
+ count = port->fifosize >> 1;
+ do {
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
+ xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ adm5120ser_stop_tx(port);
+}
+
+static void adm5120ser_irq_modem(struct uart_port *port)
+{
+ unsigned int status;
+
+ status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+
+ if (status & ADM5120_UART_DCD)
+ uart_handle_dcd_change(port, status & ADM5120_UART_DCD);
+
+ if (status & ADM5120_UART_DSR)
+ port->icount.dsr++;
+
+ if (status & ADM5120_UART_CTS)
+ uart_handle_cts_change(port, status & ADM5120_UART_CTS);
+
+ wake_up_interruptible(&port->info->delta_msr_wait);
+}
+
+static irqreturn_t adm5120ser_irq(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ unsigned long ir = ADM5120_UART_REG(port->iobase, ADM5120_UART_IR);
+
+ if (ir & (ADM5120_UART_RIS | ADM5120_UART_RTIS))
+ adm5120ser_irq_rx(port);
+ if (ir & ADM5120_UART_TIS)
+ adm5120ser_irq_tx(port);
+ if (ir & ADM5120_UART_MIS) {
+ adm5120ser_irq_modem(port);
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_IR) = 0xff;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int adm5120ser_tx_empty(struct uart_port *port)
+{
+ unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+ return (fr & ADM5120_UART_TXFE) ? TIOCSER_TEMT : 0;
+}
+
+static void adm5120ser_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static unsigned int adm5120ser_get_mctrl(struct uart_port *port)
+{
+ unsigned int result = 0;
+ unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+
+ if (fr & ADM5120_UART_CTS)
+ result |= TIOCM_CTS;
+ if (fr & ADM5120_UART_DSR)
+ result |= TIOCM_DSR;
+ if (fr & ADM5120_UART_DCD)
+ result |= TIOCM_CAR;
+ return result;
+}
+
+static void adm5120ser_start_tx(struct uart_port *port)
+{
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |= ADM5120_UART_TIE;
+}
+
+static void adm5120ser_stop_rx(struct uart_port *port)
+{
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_RIE;
+}
+
+static void adm5120ser_enable_ms(struct uart_port *port)
+{
+}
+
+static void adm5120ser_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned long flags;
+ unsigned long lcrh;
+
+ spin_lock_irqsave(&port->lock, flags);
+ lcrh = ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H);
+ if (break_state == -1)
+ lcrh |= ADM5120_UART_BRK;
+ else
+ lcrh &= ~ADM5120_UART_BRK;
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int adm5120ser_startup(struct uart_port *port)
+{
+ int ret;
+
+ ret = request_irq(port->irq, adm5120ser_irq, 0, "ADM5120 UART", port);
+ if (ret) {
+ printk(KERN_ERR "Couldn't get irq %d\n", port->irq);
+ return ret;
+ }
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) |=
+ ADM5120_UART_FIFO_EN;
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |=
+ ADM5120_UART_EN | ADM5120_UART_IE;
+ return 0;
+}
+
+static void adm5120ser_shutdown(struct uart_port *port)
+{
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_IE;
+ free_irq(port->irq, port);
+}
+
+static void adm5120ser_set_termios(struct uart_port *port,
+ struct termios *termios, struct termios *old)
+{
+ unsigned int baud, quot, lcrh;
+ unsigned long flags;
+
+ termios->c_cflag |= CREAD;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ lcrh = ADM5120_UART_FIFO_EN;
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcrh |= ADM5120_UART_W5;
+ break;
+ case CS6:
+ lcrh |= ADM5120_UART_W6;
+ break;
+ case CS7:
+ lcrh |= ADM5120_UART_W7;
+ break;
+ default:
+ lcrh |= ADM5120_UART_W8;
+ break;
+ }
+ if (termios->c_cflag & CSTOPB)
+ lcrh |= ADM5120_UART_STP2;
+ if (termios->c_cflag & PARENB) {
+ lcrh |= ADM5120_UART_PEN;
+ if (!(termios->c_cflag & PARODD))
+ lcrh |= ADM5120_UART_EPS;
+ }
+
+ spin_lock_irqsave(port->lock, flags);
+
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = ADM5120_UART_OE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= ADM5120_UART_BE;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= ADM5120_UART_BE;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns to (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= ADM5120_UART_OE;
+ }
+
+ quot = ADM5120_UART_BAUD115200;
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_L) = quot & 0xff;
+ ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_M) = quot >> 8;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *adm5120ser_type(struct uart_port *port)
+{
+ return port->type == PORT_ADM5120 ? "ADM5120" : NULL;
+}
+
+static void adm5120ser_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_ADM5120;
+}
+
+static void adm5120ser_release_port(struct uart_port *port)
+{
+ release_mem_region(port->iobase, ADM5120_UART_SIZE);
+}
+
+static int adm5120ser_request_port(struct uart_port *port)
+{
+ return request_mem_region(port->iobase, ADM5120_UART_SIZE,
+ "adm5120-uart") != NULL ? 0 : -EBUSY;
+}
+
+static struct uart_ops adm5120ser_ops = {
+ .tx_empty = adm5120ser_tx_empty,
+ .set_mctrl = adm5120ser_set_mctrl,
+ .get_mctrl = adm5120ser_get_mctrl,
+ .stop_tx = adm5120ser_stop_tx,
+ .start_tx = adm5120ser_start_tx,
+ .stop_rx = adm5120ser_stop_rx,
+ .enable_ms = adm5120ser_enable_ms,
+ .break_ctl = adm5120ser_break_ctl,
+ .startup = adm5120ser_startup,
+ .shutdown = adm5120ser_shutdown,
+ .set_termios = adm5120ser_set_termios,
+ .type = adm5120ser_type,
+ .config_port = adm5120ser_config_port,
+ .release_port = adm5120ser_release_port,
+ .request_port = adm5120ser_request_port,
+};
+
+static void adm5120console_put(const char c)
+{
+ while ((ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_FR) &
+ ADM5120_UART_TXFF) != 0);
+ ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_DATA) = c;
+}
+
+static void adm5120console_write(struct console *con, const char *s,
+ unsigned int count)
+{
+ while (count--) {
+ if (*s == '\n')
+ adm5120console_put('\r');
+ adm5120console_put(*s);
+ s++;
+ }
+}
+
+static int __init adm5120console_setup(struct console *con, char *options)
+{
+ /* Set to 115200 baud, 8N1 and enable FIFO */
+ ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_L) =
+ ADM5120_UART_BAUD115200 & 0xff;
+ ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_M) =
+ ADM5120_UART_BAUD115200 >> 8;
+ ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_H) =
+ ADM5120_UART_W8 | ADM5120_UART_FIFO_EN;
+ /* Enable port */
+ ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_CR) =
+ ADM5120_UART_EN;
+
+ return 0;
+}
+
+static struct uart_driver adm5120ser_reg;
+
+static struct console adm5120_serconsole = {
+ .name = "ttyS",
+ .write = adm5120console_write,
+ .device = uart_console_device,
+ .setup = adm5120console_setup,
+ .flags = CON_PRINTBUFFER,
+ .cflag = B115200 | CS8 | CREAD,
+ .index = 0,
+ .data = &adm5120ser_reg,
+};
+
+static int __init adm5120console_init(void)
+{
+ register_console(&adm5120_serconsole);
+ return 0;
+}
+
+console_initcall(adm5120console_init);
+
+
+static struct uart_port adm5120ser_ports[] = {
+ {
+ .iobase = ADM5120_UART_BASE0,
+ .irq = ADM5120_UART_IRQ0,
+ .uartclk = ADM5120_UARTCLK_FREQ,
+ .fifosize = 16,
+ .ops = &adm5120ser_ops,
+ .line = 0,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ },
+#if (CONFIG_ADM5120_NR_UARTS > 1)
+ {
+ .iobase = ADM5120_UART_BASE1,
+ .irq = ADM5120_UART_IRQ1,
+ .uartclk = ADM5120_UARTCLK_FREQ,
+ .fifosize = 16,
+ .ops = &adm5120ser_ops,
+ .line = 1,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ },
+#endif
+};
+
+static struct uart_driver adm5120ser_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyS",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = CONFIG_ADM5120_NR_UARTS,
+ .cons = &adm5120_serconsole,
+};
+
+static int __init adm5120ser_init(void)
+{
+ int ret, i;
+
+ ret = uart_register_driver(&adm5120ser_reg);
+ if (!ret) {
+ for (i = 0; i < CONFIG_ADM5120_NR_UARTS; i++)
+ uart_add_one_port(&adm5120ser_reg, &adm5120ser_ports[i]);
+ }
+
+ return ret;
+}
+
+__initcall(adm5120ser_init);
--- /dev/null
+/*
+ * HCD driver for ADM5120 SoC
+ *
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *
+ * Based on the ADMtek 2.4 driver
+ * (C) Copyright 2003 Junius Chen <juniusc@admtek.com.tw>
+ * Which again was based on the ohci and uhci drivers.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
+
+#include "../core/hcd.h"
+
+MODULE_DESCRIPTION("ADM5120 USB Host Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
+
+#define ADMHCD_REG_CONTROL 0x00
+#define ADMHCD_REG_INTSTATUS 0x04
+#define ADMHCD_REG_INTENABLE 0x08
+#define ADMHCD_REG_HOSTCONTROL 0x10
+#define ADMHCD_REG_FMINTERVAL 0x18
+#define ADMHCD_REG_FMNUMBER 0x1c
+#define ADMHCD_REG_LSTHRESH 0x70
+#define ADMHCD_REG_RHDESCR 0x74
+#define ADMHCD_REG_PORTSTATUS0 0x78
+#define ADMHCD_REG_PORTSTATUS1 0x7c
+#define ADMHCD_REG_HOSTHEAD 0x80
+
+
+#define ADMHCD_NUMPORTS 2
+
+#define ADMHCD_HOST_EN 0x00000001 /* Host enable */
+#define ADMHCD_SW_INTREQ 0x00000002 /* request software int */
+#define ADMHCD_SW_RESET 0x00000008 /* Reset */
+
+#define ADMHCD_INT_TD 0x00100000 /* TD completed */
+#define ADMHCD_INT_SW 0x20000000 /* software interrupt */
+#define ADMHCD_INT_FATAL 0x40000000 /* Fatal interrupt */
+#define ADMHCD_INT_ACT 0x80000000 /* Interrupt active */
+
+#define ADMHCD_STATE_RST 0x00000000 /* bus state reset */
+#define ADMHCD_STATE_RES 0x00000001 /* bus state resume */
+#define ADMHCD_STATE_OP 0x00000002 /* bus state operational */
+#define ADMHCD_STATE_SUS 0x00000003 /* bus state suspended */
+#define ADMHCD_DMA_EN 0x00000004 /* enable dma engine */
+
+#define ADMHCD_NPS 0x00000020 /* No Power Switch */
+#define ADMHCD_LPSC 0x04000000 /* Local power switch change */
+
+#define ADMHCD_CCS 0x00000001 /* current connect status */
+#define ADMHCD_PES 0x00000002 /* port enable status */
+#define ADMHCD_PSS 0x00000004 /* port suspend status */
+#define ADMHCD_POCI 0x00000008 /* port overcurrent indicator */
+#define ADMHCD_PRS 0x00000010 /* port reset status */
+#define ADMHCD_PPS 0x00000100 /* port power status */
+#define ADMHCD_LSDA 0x00000200 /* low speed device attached */
+#define ADMHCD_CSC 0x00010000 /* connect status change */
+#define ADMHCD_PESC 0x00020000 /* enable status change */
+#define ADMHCD_PSSC 0x00040000 /* suspend status change */
+#define ADMHCD_OCIC 0x00080000 /* overcurrent change*/
+#define ADMHCD_PRSC 0x00100000 /* reset status change */
+
+
+struct admhcd_ed {
+ /* Don't change first four, they used for DMA */
+ u32 control;
+ struct admhcd_td *tail;
+ struct admhcd_td *head;
+ struct admhcd_ed *next;
+ /* the rest is for the driver only: */
+ struct admhcd_td *cur;
+ struct usb_host_endpoint *ep;
+ struct urb *urb;
+ struct admhcd_ed *real;
+} __attribute__ ((packed));
+
+#define ADMHCD_ED_EPSHIFT 7 /* Shift for endpoint number */
+#define ADMHCD_ED_INT 0x00000800 /* Is this an int endpoint */
+#define ADMHCD_ED_SPEED 0x00002000 /* Is it a high speed dev? */
+#define ADMHCD_ED_SKIP 0x00004000 /* Skip this ED */
+#define ADMHCD_ED_FORMAT 0x00008000 /* Is this an isoc endpoint */
+#define ADMHCD_ED_MAXSHIFT 16 /* Shift for max packet size */
+
+struct admhcd_td {
+ /* Don't change first four, they are used for DMA */
+ u32 control;
+ u32 buffer;
+ u32 buflen;
+ struct admhcd_td *next;
+ /* the rest is for the driver only: */
+ struct urb *urb;
+ struct admhcd_td *real;
+} __attribute__ ((packed));
+
+#define ADMHCD_TD_OWN 0x80000000
+#define ADMHCD_TD_TOGGLE 0x00000000
+#define ADMHCD_TD_DATA0 0x01000000
+#define ADMHCD_TD_DATA1 0x01800000
+#define ADMHCD_TD_OUT 0x00200000
+#define ADMHCD_TD_IN 0x00400000
+#define ADMHCD_TD_SETUP 0x00000000
+#define ADMHCD_TD_ISO 0x00010000
+#define ADMHCD_TD_R 0x00040000
+#define ADMHCD_TD_INTEN 0x00010000
+
+static int admhcd_td_err[16] = {
+ 0, /* No */
+ -EREMOTEIO, /* CRC */
+ -EREMOTEIO, /* bit stuff */
+ -EREMOTEIO, /* data toggle */
+ -EPIPE, /* stall */
+ -ETIMEDOUT, /* timeout */
+ -EPROTO, /* pid err */
+ -EPROTO, /* unexpected pid */
+ -EREMOTEIO, /* data overrun */
+ -EREMOTEIO, /* data underrun */
+ -ETIMEDOUT, /* 1010 */
+ -ETIMEDOUT, /* 1011 */
+ -EREMOTEIO, /* buffer overrun */
+ -EREMOTEIO, /* buffer underrun */
+ -ETIMEDOUT, /* 1110 */
+ -ETIMEDOUT, /* 1111 */
+};
+
+#define ADMHCD_TD_ERRMASK 0x38000000
+#define ADMHCD_TD_ERRSHIFT 27
+
+#define TD(td) ((struct admhcd_td *)(((u32)(td)) & ~0xf))
+#define ED(ed) ((struct admhcd_ed *)(((u32)(ed)) & ~0xf))
+
+struct admhcd {
+ u32 base;
+ u32 dma_en;
+ spinlock_t lock;
+ unsigned long flags;
+};
+
+#define hcd_to_admhcd(hcd) ((struct admhcd *)(hcd)->hcd_priv)
+
+static char hcd_name[] = "adm5120-hcd";
+
+static u32 admhcd_reg_get(struct admhcd *ahcd, int reg)
+{
+ return *(volatile u32 *)KSEG1ADDR(ahcd->base+reg);
+}
+
+static void admhcd_reg_set(struct admhcd *ahcd, int reg, u32 val)
+{
+ *(volatile u32 *)KSEG1ADDR(ahcd->base+reg) = val;
+}
+
+static void admhcd_lock(struct admhcd *ahcd)
+{
+ spin_lock_irqsave(&ahcd->lock, ahcd->flags);
+ ahcd->dma_en = admhcd_reg_get(ahcd, ADMHCD_REG_HOSTCONTROL) &
+ ADMHCD_DMA_EN;
+ admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
+}
+
+static void admhcd_unlock(struct admhcd *ahcd)
+{
+ admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL,
+ ADMHCD_STATE_OP | ahcd->dma_en);
+ spin_unlock_irqrestore(&ahcd->lock, ahcd->flags);
+}
+
+static struct admhcd_td *admhcd_td_alloc(struct admhcd_ed *ed, struct urb *urb)
+{
+ struct admhcd_td *tdn, *td;
+
+ tdn = kmalloc(sizeof(struct admhcd_td), GFP_ATOMIC);
+ if (!tdn)
+ return NULL;
+ tdn->real = tdn;
+ tdn = (struct admhcd_td *)KSEG1ADDR(tdn);
+ memset(tdn, 0, sizeof(struct admhcd_td));
+ if (ed->cur == NULL) {
+ ed->cur = tdn;
+ ed->head = tdn;
+ ed->tail = tdn;
+ td = tdn;
+ } else {
+ /* Supply back the old tail and link in new td as tail */
+ td = TD(ed->tail);
+ TD(ed->tail)->next = tdn;
+ ed->tail = tdn;
+ }
+ td->urb = urb;
+
+ return td;
+}
+
+static void admhcd_td_free(struct admhcd_ed *ed, struct urb *urb)
+{
+ struct admhcd_td *td, **tdp;
+
+ if (urb == NULL)
+ ed->control |= ADMHCD_ED_SKIP;
+ tdp = &ed->cur;
+ td = ed->cur;
+ do {
+ if (td->urb == urb)
+ break;
+ tdp = &td->next;
+ td = TD(td->next);
+ } while (td);
+ while (td && td->urb == urb) {
+ *tdp = TD(td->next);
+ kfree(td->real);
+ td = *tdp;
+ }
+}
+
+/* Find an endpoint's descriptor, if needed allocate a new one and link it
+ in the DMA chain
+ */
+static struct admhcd_ed *admhcd_get_ed(struct admhcd *ahcd,
+ struct usb_host_endpoint *ep, struct urb *urb)
+{
+ struct admhcd_ed *hosthead;
+ struct admhcd_ed *found = NULL, *ed = NULL;
+ unsigned int pipe = urb->pipe;
+
+ admhcd_lock(ahcd);
+ hosthead = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
+ if (hosthead) {
+ for (ed = hosthead;; ed = ED(ed->next)) {
+ if (ed->ep == ep) {
+ found = ed;
+ break;
+ }
+ if (ED(ed->next) == hosthead)
+ break;
+ }
+ }
+ if (!found) {
+ found = kmalloc(sizeof(struct admhcd_ed), GFP_ATOMIC);
+ if (!found)
+ goto out;
+ memset(found, 0, sizeof(struct admhcd_ed));
+ found->real = found;
+ found->ep = ep;
+ found = (struct admhcd_ed *)KSEG1ADDR(found);
+ found->control = usb_pipedevice(pipe) |
+ (usb_pipeendpoint(pipe) << ADMHCD_ED_EPSHIFT) |
+ (usb_pipeint(pipe) ? ADMHCD_ED_INT : 0) |
+ (urb->dev->speed == USB_SPEED_FULL ? ADMHCD_ED_SPEED : 0) |
+ (usb_pipeisoc(pipe) ? ADMHCD_ED_FORMAT : 0) |
+ (usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)) << ADMHCD_ED_MAXSHIFT);
+ /* Alloc first dummy td */
+ admhcd_td_alloc(found, NULL);
+ if (hosthead) {
+ found->next = hosthead;
+ ed->next = found;
+ } else {
+ found->next = found;
+ admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)found);
+ }
+ }
+out:
+ admhcd_unlock(ahcd);
+ return found;
+}
+
+static struct admhcd_td *admhcd_td_fill(u32 control, struct admhcd_td *td,
+ dma_addr_t data, int len)
+{
+ td->buffer = data;
+ td->buflen = len;
+ td->control = control;
+ return TD(td->next);
+}
+
+static void admhcd_ed_start(struct admhcd *ahcd, struct admhcd_ed *ed)
+{
+ struct admhcd_td *td = ed->cur;
+
+ if (ed->urb)
+ return;
+ if (td->urb) {
+ ed->urb = td->urb;
+ while (1) {
+ td->control |= ADMHCD_TD_OWN;
+ if (TD(td->next)->urb != td->urb) {
+ td->buflen |= ADMHCD_TD_INTEN;
+ break;
+ }
+ td = TD(td->next);
+ }
+ }
+ ed->head = TD(ed->head);
+ ahcd->dma_en |= ADMHCD_DMA_EN;
+}
+
+static irqreturn_t adm5120hcd_irq(int irq, void *ptr, struct pt_regs *regs)
+{
+ struct usb_hcd *hcd = (struct usb_hcd *)ptr;
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ u32 intstatus;
+
+ intstatus = admhcd_reg_get(ahcd, ADMHCD_REG_INTSTATUS);
+ if (intstatus & ADMHCD_INT_FATAL) {
+ admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_FATAL);
+ //
+ }
+ if (intstatus & ADMHCD_INT_SW) {
+ admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_SW);
+ //
+ }
+ if (intstatus & ADMHCD_INT_TD) {
+ struct admhcd_ed *ed, *head;
+
+ admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_TD);
+
+ head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
+ ed = head;
+ if (ed) do {
+ /* Is it a finished TD? */
+ if (ed->urb && !(ed->cur->control & ADMHCD_TD_OWN)) {
+ struct admhcd_td *td;
+ int error;
+
+ td = ed->cur;
+ error = (td->control & ADMHCD_TD_ERRMASK) >>
+ ADMHCD_TD_ERRSHIFT;
+ ed->urb->status = admhcd_td_err[error];
+ admhcd_td_free(ed, ed->urb);
+ // Calculate real length!!!
+ ed->urb->actual_length = ed->urb->transfer_buffer_length;
+ ed->urb->hcpriv = NULL;
+ usb_hcd_giveback_urb(hcd, ed->urb);
+ ed->urb = NULL;
+ }
+ admhcd_ed_start(ahcd, ed);
+ ed = ED(ed->next);
+ } while (ed != head);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int admhcd_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep,
+ struct urb *urb, int mem_flags)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ struct admhcd_ed *ed;
+ struct admhcd_td *td;
+ int size = 0, i, zero = 0, ret = 0;
+ unsigned int pipe = urb->pipe, toggle = 0;
+ dma_addr_t data = (dma_addr_t)urb->transfer_buffer;
+ int data_len = urb->transfer_buffer_length;
+
+ ed = admhcd_get_ed(ahcd, ep, urb);
+ if (!ed)
+ return -ENOMEM;
+
+ switch(usb_pipetype(pipe)) {
+ case PIPE_CONTROL:
+ size = 2;
+ case PIPE_INTERRUPT:
+ case PIPE_BULK:
+ default:
+ size += urb->transfer_buffer_length / 4096;
+ if (urb->transfer_buffer_length % 4096)
+ size++;
+ if (size == 0)
+ size++;
+ else if (urb->transfer_flags & URB_ZERO_PACKET &&
+ !(urb->transfer_buffer_length %
+ usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)))) {
+ size++;
+ zero = 1;
+ }
+ break;
+ case PIPE_ISOCHRONOUS:
+ size = urb->number_of_packets;
+ break;
+ }
+
+ admhcd_lock(ahcd);
+ /* Remember the first td */
+ td = admhcd_td_alloc(ed, urb);
+ if (!td) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ /* Allocate additionall tds first */
+ for (i = 1; i < size; i++) {
+ if (admhcd_td_alloc(ed, urb) == NULL) {
+ admhcd_td_free(ed, urb);
+ ret = -ENOMEM;
+ goto out;
+ }
+ }
+
+ if (usb_gettoggle(urb->dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)))
+ toggle = ADMHCD_TD_TOGGLE;
+ else {
+ toggle = ADMHCD_TD_DATA0;
+ usb_settoggle(urb->dev, usb_pipeendpoint(pipe),
+ usb_pipeout(pipe), 1);
+ }
+
+ switch(usb_pipetype(pipe)) {
+ case PIPE_CONTROL:
+ td = admhcd_td_fill(ADMHCD_TD_SETUP | ADMHCD_TD_DATA0,
+ td, (dma_addr_t)urb->setup_packet, 8);
+ while (data_len > 0) {
+ td = admhcd_td_fill(ADMHCD_TD_DATA1
+ | ADMHCD_TD_R |
+ (usb_pipeout(pipe) ?
+ ADMHCD_TD_OUT : ADMHCD_TD_IN), td,
+ data, data_len % 4097);
+ data_len -= 4096;
+ }
+ admhcd_td_fill(ADMHCD_TD_DATA1 | (usb_pipeout(pipe) ?
+ ADMHCD_TD_IN : ADMHCD_TD_OUT), td,
+ data, 0);
+ break;
+ case PIPE_INTERRUPT:
+ case PIPE_BULK:
+ //info ok for interrupt?
+ i = 0;
+ while(data_len > 4096) {
+ td = admhcd_td_fill((usb_pipeout(pipe) ?
+ ADMHCD_TD_OUT :
+ ADMHCD_TD_IN | ADMHCD_TD_R) |
+ (i ? ADMHCD_TD_TOGGLE : toggle), td,
+ data, 4096);
+ data += 4096;
+ data_len -= 4096;
+ i++;
+ }
+ td = admhcd_td_fill((usb_pipeout(pipe) ?
+ ADMHCD_TD_OUT : ADMHCD_TD_IN) |
+ (i ? ADMHCD_TD_TOGGLE : toggle), td, data, data_len);
+ i++;
+ if (zero)
+ admhcd_td_fill((usb_pipeout(pipe) ?
+ ADMHCD_TD_OUT : ADMHCD_TD_IN) |
+ (i ? ADMHCD_TD_TOGGLE : toggle), td, 0, 0);
+ break;
+ case PIPE_ISOCHRONOUS:
+ for (i = 0; i < urb->number_of_packets; i++) {
+ td = admhcd_td_fill(ADMHCD_TD_ISO |
+ ((urb->start_frame + i) & 0xffff), td,
+ data + urb->iso_frame_desc[i].offset,
+ urb->iso_frame_desc[i].length);
+ }
+ break;
+ }
+ urb->hcpriv = ed;
+ admhcd_ed_start(ahcd, ed);
+out:
+ admhcd_unlock(ahcd);
+ return ret;
+}
+
+static int admhcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ struct admhcd_ed *ed;
+
+ admhcd_lock(ahcd);
+
+ ed = urb->hcpriv;
+ if (ed && ed->urb != urb)
+ admhcd_td_free(ed, urb);
+
+ admhcd_unlock(ahcd);
+ return 0;
+}
+
+static void admhcd_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ struct admhcd_ed *ed, *edt, *head;
+
+ admhcd_lock(ahcd);
+
+ head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
+ if (!head)
+ goto out;
+ for (ed = head; ED(ed->next) != head; ed = ED(ed->next))
+ if (ed->ep == ep)
+ break;
+ if (ed->ep != ep)
+ goto out;
+ while (ed->cur)
+ admhcd_td_free(ed, ed->cur->urb);
+ if (head == ed) {
+ if (ED(ed->next) == ed) {
+ admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0);
+ ahcd->dma_en = 0;
+ goto out_free;
+ }
+ head = ED(ed->next);
+ for (edt = head; ED(edt->next) != head; edt = ED(edt->next));
+ edt->next = ED(ed->next);
+ admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)ed->next);
+ goto out_free;
+ }
+ for (edt = head; edt->next != ed; edt = edt->next);
+ edt->next = ed->next;
+out_free:
+ kfree(ed->real);
+out:
+ admhcd_unlock(ahcd);
+}
+
+static int admhcd_get_frame_number(struct usb_hcd *hcd)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+
+ return admhcd_reg_get(ahcd, ADMHCD_REG_FMNUMBER) & 0x0000ffff;
+}
+
+static int admhcd_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ int port;
+
+ *buf = 0;
+ for (port = 0; port < ADMHCD_NUMPORTS; port++) {
+ if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4) &
+ (ADMHCD_CSC | ADMHCD_PESC | ADMHCD_PSSC | ADMHCD_OCIC |
+ ADMHCD_PRSC))
+ *buf |= (1 << (port + 1));
+ }
+ return !!*buf;
+}
+
+static __u8 root_hub_hub_des[] = {
+ 0x09, /* __u8 bLength; */
+ 0x29, /* __u8 bDescriptorType; Hub-descriptor */
+ 0x02, /* __u8 bNbrPorts; */
+ 0x0a, 0x00, /* __u16 wHubCharacteristics; */
+ 0x01, /* __u8 bPwrOn2pwrGood; 2ms */
+ 0x00, /* __u8 bHubContrCurrent; 0mA */
+ 0x00, /* __u8 DeviceRemovable; */
+ 0xff, /* __u8 PortPwrCtrlMask; */
+};
+
+static int admhcd_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ int retval = 0, len;
+ unsigned int port = wIndex -1;
+
+ switch (typeReq) {
+
+ case GetHubStatus:
+ *(__le32 *)buf = cpu_to_le32(0);
+ break;
+ case GetPortStatus:
+ if (port >= ADMHCD_NUMPORTS)
+ goto err;
+ *(__le32 *)buf = cpu_to_le32(
+ admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4));
+ break;
+ case SetHubFeature: /* We don't implement these */
+ case ClearHubFeature:
+ switch (wValue) {
+ case C_HUB_OVER_CURRENT:
+ case C_HUB_LOCAL_POWER:
+ break;
+ default:
+ goto err;
+ }
+ case SetPortFeature:
+ if (port >= ADMHCD_NUMPORTS)
+ goto err;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_PSS);
+ break;
+ case USB_PORT_FEAT_RESET:
+ if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4)
+ & ADMHCD_CCS) {
+ admhcd_reg_set(ahcd,
+ ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_PRS | ADMHCD_CSC);
+ mdelay(50);
+ admhcd_reg_set(ahcd,
+ ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_PES | ADMHCD_CSC);
+ }
+ break;
+ case USB_PORT_FEAT_POWER:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_PPS);
+ break;
+ default:
+ goto err;
+ }
+ break;
+ case ClearPortFeature:
+ if (port >= ADMHCD_NUMPORTS)
+ goto err;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_CCS);
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_PESC);
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_POCI);
+ break;
+ case USB_PORT_FEAT_C_SUSPEND:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_PSSC);
+ case USB_PORT_FEAT_POWER:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_LSDA);
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_CSC);
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_OCIC);
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+ ADMHCD_PRSC);
+ break;
+ default:
+ goto err;
+ }
+ break;
+ case GetHubDescriptor:
+ len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
+ memcpy(buf, root_hub_hub_des, len);
+ break;
+ default:
+err:
+ retval = -EPIPE;
+ }
+
+ return retval;
+}
+
+static struct hc_driver adm5120_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "ADM5120 HCD",
+ .hcd_priv_size = sizeof(struct admhcd),
+ .flags = HCD_USB11,
+ .urb_enqueue = admhcd_urb_enqueue,
+ .urb_dequeue = admhcd_urb_dequeue,
+ .endpoint_disable = admhcd_endpoint_disable,
+ .get_frame_number = admhcd_get_frame_number,
+ .hub_status_data = admhcd_hub_status_data,
+ .hub_control = admhcd_hub_control,
+};
+
+static int __init adm5120hcd_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+ struct admhcd *ahcd;
+ struct usb_device *udev;
+ int err = 0;
+
+ if (!request_mem_region(pdev->resource[0].start,
+ pdev->resource[0].end - pdev->resource[0].start, hcd_name)) {
+ pr_debug("couldn't request mem\n");
+ err = -EBUSY;
+ goto out;
+ }
+
+ //hcd = usb_create_hcd(&adm5120_hc_driver, pdev, pdev->bus_id);
+ if (!hcd)
+ goto out_mem;
+
+ ahcd = hcd_to_admhcd(hcd);
+ dev_set_drvdata(pdev, ahcd);
+ hcd->self.controller = pdev;
+ //hcd->self.bus_name = pdev->bus_id;
+ hcd->irq = pdev->resource[1].start;
+ hcd->regs = (void *)pdev->resource[0].start;
+ hcd->product_desc = hcd_name;
+ ahcd->base = pdev->resource[0].start;
+
+ if (request_irq(pdev->resource[1].start, adm5120hcd_irq, 0, hcd_name,
+ hcd)) {
+ pr_debug("couldn't request irq\n");
+ err = -EBUSY;
+ goto out_hcd;
+ }
+
+ //err = usb_register_bus(&hcd->self);
+ //if (err < 0)
+ // goto out_irq;
+
+ spin_lock_init(&ahcd->lock);
+
+ admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0);
+ mdelay(10);
+ admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_SW_RESET);
+ while (admhcd_reg_get(ahcd, ADMHCD_REG_CONTROL) & ADMHCD_SW_RESET)
+ mdelay(1);
+
+ admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_HOST_EN);
+ admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0x00000000);
+ admhcd_reg_set(ahcd, ADMHCD_REG_FMINTERVAL, 0x20002edf);
+ admhcd_reg_set(ahcd, ADMHCD_REG_LSTHRESH, 0x628);
+ admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE,
+ ADMHCD_INT_ACT | ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD);
+ admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS,
+ ADMHCD_INT_ACT | ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD);
+ admhcd_reg_set(ahcd, ADMHCD_REG_RHDESCR, ADMHCD_NPS | ADMHCD_LPSC);
+ admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
+
+ udev = usb_alloc_dev(NULL, &hcd->self, 0);
+ if (!udev) {
+ err = -ENOMEM;
+ goto out_bus;
+ }
+
+ udev->speed = USB_SPEED_FULL;
+ hcd->state = HC_STATE_RUNNING;
+
+ //err = hcd_register_root(udev, hcd);
+ //if (err != 0) {
+ // usb_put_dev(udev);
+ // goto out_dev;
+ //}
+
+ return 0;
+
+out_dev:
+ usb_put_dev(udev);
+out_bus:
+ //usb_deregister_bus(&hcd->self);
+out_irq:
+ free_irq(pdev->resource[1].start, hcd);
+out_hcd:
+ usb_put_hcd(hcd);
+out_mem:
+ release_mem_region(pdev->resource[0].start,
+ pdev->resource[0].end - pdev->resource[0].start);
+out:
+ return err;
+}
+
+static int __init_or_module adm5120hcd_remove(struct platform_device *pdev)
+{
+ device_init_wakeup(&pdev->dev, 0);
+}
+
+static struct platform_driver adm5120hcd_driver = {
+ .probe = adm5120hcd_probe,
+ .remove = adm5120hcd_remove,
+ .driver = {
+ .name = "adm5120-hcd",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init adm5120hcd_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ return platform_driver_register(&adm5120hcd_driver);
+}
+
+static void __exit adm5120hcd_exit(void)
+{
+ platform_driver_unregister(&adm5120hcd_driver);
+}
+
+module_init(adm5120hcd_init);
+module_exit(adm5120hcd_exit);
--- /dev/null
+/*
+ * $Id$
+ *
+ * ADM5120 SoC definitions
+ *
+ * This file defines some constants specific to the ADM5120 SoC
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+#ifndef _ADM5120_DEFS_H
+#define _ADM5120_DEFS_H
+
+#define ADM5120_SDRAM0_BASE 0x00000000
+#define ADM5120_SDRAM1_BASE 0x01000000
+#define ADM5120_SRAM1_BASE 0x10000000
+#define ADM5120_MPMC_BASE 0x11000000
+#define ADM5120_USBC_BASE 0x11200000
+#define ADM5120_PCIMEM_BASE 0x11400000
+#define ADM5120_PCIIO_BASE 0x11500000
+#define ADM5120_PCICFG_ADDR 0x115FFFF0
+#define ADM5120_PCICFG_DATA 0x115FFFF8
+#define ADM5120_SWITCH_BASE 0x12000000
+#define ADM5120_INTC_BASE 0x12200000
+#define ADM5120_UART0_BASE 0x12600000
+#define ADM5120_UART1_BASE 0x12800000
+#define ADM5120_SRAM0_BASE 0x1FC00000
+
+#define ADM5120_MPMC_SIZE 0x1000
+#define ADM5120_USBC_SIZE 0x84
+#define ADM5120_PCIMEM_SIZE (ADM5120_PCIIO_BASE - ADM5120_PCIMEM_BASE)
+#define ADM5120_PCIIO_SIZE (ADM5120_PCICFG_ADDR - ADM5120_PCIIO_BASE)
+#define ADM5120_PCICFG_SIZE 0x10
+#define ADM5120_SWITCH_SIZE 0x114
+#define ADM5120_INTC_SIZE 0x28
+#define ADM5120_UART_SIZE 0x20
+
+#define ADM5120_CLK_175 175000000
+#define ADM5120_CLK_200 200000000
+#define ADM5120_CLK_225 225000000
+#define ADM5120_CLK_250 250000000
+
+#define ADM5120_UART_CLOCK 62500000
+
+#endif /* _ADM5120_DEFS_H */
--- /dev/null
+/*
+ * $Id$
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _ADM5120_INFO_H
+#define _ADM5120_INFO_H
+
+#include <linux/types.h>
+
+struct adm5120_info {
+ unsigned int product_code;
+ unsigned int revision;
+ unsigned int cpu_package;
+ unsigned int nand_boot;
+ unsigned long cpu_speed;
+ unsigned int boot_loader;
+ unsigned int board_type;
+ unsigned int num_iface;
+};
+
+#define CPU_SPEED_175 175000000
+#define CPU_SPEED_200 200000000
+#define CPU_SPEED_225 225000000
+#define CPU_SPEED_250 250000000
+
+#define CPU_PACKAGE_PQFP 0
+#define CPU_PACKAGE_BGA 1
+
+#define BOOT_LOADER_UNKNOWN 0
+#define BOOT_LOADER_CFE 1
+#define BOOT_LOADER_UBOOT 2
+#define BOOT_LOADER_MYLOADER 3
+#define BOOT_LOADER_ROUTERBOOT 4
+#define BOOT_LOADER_LAST 4
+
+#define BOARD_TYPE_UNKNOWN 0
+#define BOARD_TYPE_WP54G_WRT 1
+#define BOARD_TYPE_WP54G 2
+#define BOARD_TYPE_WP54AG 3
+#define BOARD_TYPE_WPP54G 4
+#define BOARD_TYPE_WPP54AG 5
+#define BOARD_TYPE_NP28G 6
+#define BOARD_TYPE_NP28GHS 7
+#define BOARD_TYPE_NP27G 8
+#define BOARD_TYPE_WP54Gv1C 9
+#define BOARD_TYPE_RB_111 10
+#define BOARD_TYPE_RB_112 11
+#define BOARD_TYPE_RB_133 12
+#define BOARD_TYPE_RB_133C 13
+#define BOARD_TYPE_RB_150 14
+#define BOARD_TYPE_RB_153 15
+#define BOART_TYPE_LAST 15
+
+extern struct adm5120_info adm5120_info;
+extern void adm5120_info_init(void);
+
+static inline int adm5120_has_pci(void)
+{
+ return (adm5120_info.cpu_package == CPU_PACKAGE_BGA);
+}
+
+#endif /* _ADM5120_INFO_H */
--- /dev/null
+/*
+ * ADM5120 ethernet switch definitions
+ *
+ * This header file defines the hardware registers of the ADM5120 SoC
+ * built-in Ethernet switch.
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _ADM5120_SWITCH_H
+#define _ADM5120_SWITCH_H
+
+#define BITMASK(len) ((1 << (len))-1)
+#define ONEBIT(at) (1 << (at))
+
+/* Switch register offsets */
+#define SWITCH_REG_CODE 0x0000
+#define SWITCH_REG_SOFT_RESET 0x0004
+#define SWITCH_REG_MEMCTRL 0x001C
+#define SWITCH_REG_CPUP_CONF 0x0024
+#define SWITCH_REG_PORT_CONF0 0x0028
+#define SWITCH_REG_PORT_CONF1 0x002C
+#define SWITCH_REG_PORT_CONF2 0x0030
+#define SWITCH_REG_VLAN_G1 0x0040
+#define SWITCH_REG_VLAN_G2 0x0044
+#define SWITCH_REG_SEND_TRIG 0x0048
+#define SWITCH_REG_MAC_WT0 0x0058
+#define SWITCH_REG_MAC_WT1 0x005C
+#define SWITCH_REG_PHY_CNTL0 0x0068
+#define SWITCH_REG_PHY_CNTL1 0x006C
+#define SWITCH_REG_PHY_CNTL2 0x007C
+#define SWITCH_REG_PHY_CNTL3 0x0080
+#define SWITCH_REG_PRI_CNTL 0x0084
+#define SWITCH_REG_INT_STATUS 0x00B0
+#define SWITCH_REG_INT_MASK 0x00B4
+#define SWITCH_REG_GPIO_CONF0 0x00B8
+#define SWITCH_REG_GPIO_CONF2 0x00BC
+#define SWITCH_REG_WDOG0 0x00C0
+#define SWITCH_REG_WDOG1 0x00C4
+#define SWITCH_REG_PHY_CNTL4 0x00A0
+
+#define SWITCH_REG_SEND_HBADDR 0x00D0
+#define SWITCH_REG_SEND_LBADDR 0x00D4
+#define SWITCH_REG_RECV_HBADDR 0x00D8
+#define SWITCH_REG_RECV_LBADDR 0x00DC
+
+#define SWITCH_REG_TIMER_INT 0x00F0
+#define SWITCH_REG_TIMER 0x00F4
+
+#define SWITCH_REG_PORT0_LED 0x0100
+#define SWITCH_REG_PORT1_LED 0x0104
+#define SWITCH_REG_PORT2_LED 0x0108
+#define SWITCH_REG_PORT3_LED 0x010C
+#define SWITCH_REG_PORT4_LED 0x0110
+
+/* CODE register bits */
+#define CODE_PC_MASK BITMASK(16) /* Product Code */
+#define CODE_REV_SHIFT 16
+#define CODE_REV_MASK BITMASK(4) /* Product Revision */
+#define CODE_CLKS_SHIFT 20
+#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */
+#define CODE_CLKS_175 0 /* 175 MHz */
+#define CODE_CLKS_200 1 /* 200 MHz */
+#define CODE_CLKS_225 2 /* 225 MHz */
+#define CODE_CLKS_250 3 /* 250 MHz */
+#define CODE_NAB ONEBIT(24) /* NAND boot */
+#define CODE_PK_MASK BITMASK(1) /* Package type */
+#define CODE_PK_SHIFT 29
+#define CODE_PK_BGA 0 /* BGA package */
+#define CODE_PK_PQFP 1 /* PQFP package */
+
+
+#endif /* _ADM5120_SWITCH_H */
--- /dev/null
+/*
+ * Copyright (C) 2006,2007 Gabor Juhos
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _MYLOADER_H_
+#define _MYLOADER_H_
+
+/*
+ * Firmware file format:
+ *
+ * <header>
+ * [<block descriptor 0>]
+ * ...
+ * [<block descriptor n>]
+ * <null block descriptor>
+ * [<block data 0>]
+ * ...
+ * [<block data n>]
+ *
+ *
+ */
+
+/* Myloader specific magic numbers */
+#define MYLO_MAGIC_FIRMWARE 0x4C594D00
+#define MYLO_MAGIC_20021103 0x20021103
+#define MYLO_MAGIC_20021107 0x20021107
+
+#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107
+#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103
+#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103
+
+/*
+ * Addresses of the data structures provided by MyLoader
+ */
+#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */
+#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */
+#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */
+#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */
+
+/* Vendor ID's (seems to be same as the PCI vendor ID's) */
+#define VENID_COMPEX 0x11F6
+
+/* Devices based on the ADM5120 */
+#define DEVID_COMPEX_NP27G 0x0078
+#define DEVID_COMPEX_NP28G 0x044C
+#define DEVID_COMPEX_NP28GHS 0x044E
+#define DEVID_COMPEX_WP54Gv1C 0x0514
+#define DEVID_COMPEX_WP54G 0x0515
+#define DEVID_COMPEX_WP54AG 0x0546
+#define DEVID_COMPEX_WPP54AG 0x0550
+#define DEVID_COMPEX_WPP54G 0x0555
+
+/* Devices based on the IXP422 */
+#define DEVID_COMPEX_WP18 0x047E
+#define DEVID_COMPEX_NP18A 0x0489
+
+/* Other devices */
+#define DEVID_COMPEX_NP26G8M 0x03E8
+#define DEVID_COMPEX_NP26G16M 0x03E9
+
+struct mylo_fw_header {
+ uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */
+ uint32_t crc; /* CRC of the whole firmware */
+ uint32_t res0; /* unknown/unused */
+ uint32_t res1; /* unknown/unused */
+ uint16_t vid; /* vendor ID */
+ uint16_t did; /* device ID */
+ uint16_t svid; /* sub vendor ID */
+ uint16_t sdid; /* sub device ID */
+ uint32_t rev; /* device revision */
+ uint32_t fwhi; /* FIXME: firmware version high? */
+ uint32_t fwlo; /* FIXME: firmware version low? */
+ uint32_t flags; /* firmware flags */
+};
+
+#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */
+#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */
+
+struct mylo_fw_blockdesc {
+ uint32_t type; /* block type */
+ uint32_t addr; /* relative address to flash start */
+ uint32_t dlen; /* size of block data in bytes */
+ uint32_t blen; /* total size of block in bytes */
+};
+
+#define FW_DESC_TYPE_UNUSED 0
+#define FW_DESC_TYPE_USED 1
+
+struct mylo_partition {
+ uint16_t flags; /* partition flags */
+ uint16_t type; /* type of the partition */
+ uint32_t addr; /* relative address of the partition from the
+ flash start */
+ uint32_t size; /* size of the partition in bytes */
+ uint32_t param; /* if this is the active partition, the
+ MyLoader load code to this address */
+};
+
+#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition,
+ * MyLoader loads firmware from here */
+#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */
+#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */
+#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM
+ * before decompression */
+#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */
+
+#define PARTITION_TYPE_FREE 0
+#define PARTITION_TYPE_USED 1
+
+#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the
+ partition table */
+
+struct mylo_partition_table {
+ uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */
+ uint32_t res0; /* unknown/unused */
+ uint32_t res1; /* unknown/unused */
+ uint32_t res2; /* unknown/unused */
+ struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
+};
+
+struct mylo_partition_header {
+ uint32_t len; /* length of the partition data */
+ uint32_t crc; /* CRC value of the partition data */
+};
+
+struct mylo_system_params {
+ uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */
+ uint32_t res0;
+ uint32_t res1;
+ uint32_t mylo_ver;
+ uint16_t vid; /* Vendor ID */
+ uint16_t did; /* Device ID */
+ uint16_t svid; /* Sub Vendor ID */
+ uint16_t sdid; /* Sub Device ID */
+ uint32_t rev; /* device revision */
+ uint32_t fwhi;
+ uint32_t fwlo;
+ uint32_t tftp_addr;
+ uint32_t prog_start;
+ uint32_t flash_size; /* Size of boot FLASH in bytes */
+ uint32_t dram_size; /* Size of onboard RAM in bytes */
+};
+
+
+struct mylo_eth_addr {
+ uint8_t mac[6];
+ uint8_t csum[2];
+};
+
+#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address
+ in the board parameters */
+
+struct mylo_board_params {
+ uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */
+ uint32_t res0;
+ uint32_t res1;
+ uint32_t res2;
+ struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
+};
+
+#endif /* _MYLOADER_H_*/
--- /dev/null
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+LOADADDR = 0x81000000 # RAM start + 16M
+KERNEL_ENTRY = 0x80101000
+RAMSIZE = 0x00100000 # 1MB
+IMAGE_COPY = 1
+
+LOADER_MAKEOPTS= \
+ KDIR=$(KDIR) \
+ LOADADDR=$(LOADADDR) \
+ KERNEL_ENTRY=$(KERNEL_ENTRY) \
+ RAMSIZE=$(RAMSIZE) \
+ IMAGE_COPY=$(IMAGE_COPY)
+
+#define Build/Compile
+# $(CC) -o $(STAGING_DIR)/bin/patch-cmdline $(PLATFORM_DIR)/src/patch-cmdline.c
+#endef
+
+define Build/Clean
+ $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean
+endef
+
+define Image/Prepare
+ cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+ $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile
+endef
+
+define Image/BuildKernel
+ $(CP) $(KDIR)/loader.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux
+endef
+
+define Image/cmdline/jffs2-64k
+block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit
+endef
+
+define Image/cmdline/jffs2-128k
+block2mtd.block2mtd=/dev/cfa2,131072 root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit
+endef
+
+define Image/cmdline/ext2
+root=/dev/cfa2 rootfstype=ext2 init=/etc/preinit
+endef
+
+define Image/Build
+ #$(STAGING_DIR)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/$(1))) '
+ ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin 4 $(KDIR)/vmlinux.elf $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+endef
+
+$(eval $(call BuildImage))
--- /dev/null
+#!/usr/bin/env bash
+OUTPUT="$1"
+KERNELSIZE="$2"
+KERNELIMAGE="$3"
+ROOTFSSIZE="$4"
+ROOTFSIMAGE="$5"
+
+rm -f "$OUTPUT"
+
+# create partition table
+set `ptgen -o "$OUTPUT" -h 16 -s 32 -t 0x27 -p ${KERNELSIZE}m -t 0x83 -p ${ROOTFSSIZE}m`
+
+KERNELOFFSET="$(($1 / 512))"
+ROOTFSOFFSET="$(($2 / 512))"
+
+dd if="$KERNELIMAGE" of="$OUTPUT" bs=512 conv=notrunc seek="$KERNELOFFSET"
+dd if="$ROOTFSIMAGE" of="$OUTPUT" bs=512 conv=notrunc seek="$ROOTFSOFFSET"
--- /dev/null
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# $Id: Makefile 4439 2006-08-04 17:14:36Z nbd $
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME := lzma-loader
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+$(PKG_BUILD_DIR)/.prepared:
+ mkdir $(PKG_BUILD_DIR)
+ $(CP) ./src/* $(PKG_BUILD_DIR)/
+ touch $@
+
+$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared
+ $(MAKE) -C $(PKG_BUILD_DIR) CC="$(TARGET_CC)" \
+ LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)"
+
+download:
+prepare: $(PKG_BUILD_DIR)/.prepared
+compile: $(PKG_BUILD_DIR)/loader.gz
+install:
+
+ifneq ($(TARGET),)
+install: compile
+ $(CP) $(PKG_BUILD_DIR)/loader.gz $(PKG_BUILD_DIR)/loader.elf $(TARGET)/
+endif
+
+clean:
+ rm -rf $(PKG_BUILD_DIR)
--- /dev/null
+/*
+ LzmaDecode.c
+ LZMA Decoder
+
+ LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
+ http://www.7-zip.org/
+
+ LZMA SDK is licensed under two licenses:
+ 1) GNU Lesser General Public License (GNU LGPL)
+ 2) Common Public License (CPL)
+ It means that you can select one of these two licenses and
+ follow rules of that license.
+
+ SPECIAL EXCEPTION:
+ Igor Pavlov, as the author of this code, expressly permits you to
+ statically or dynamically link your code (or bind by name) to the
+ interfaces of this file without subjecting your linked code to the
+ terms of the CPL or GNU LGPL. Any modifications or additions
+ to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#ifndef Byte
+#define Byte unsigned char
+#endif
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+typedef struct _CRangeDecoder
+{
+ Byte *Buffer;
+ Byte *BufferLim;
+ UInt32 Range;
+ UInt32 Code;
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *InCallback;
+ int Result;
+ #endif
+ int ExtraBytes;
+} CRangeDecoder;
+
+Byte RangeDecoderReadByte(CRangeDecoder *rd)
+{
+ if (rd->Buffer == rd->BufferLim)
+ {
+ #ifdef _LZMA_IN_CB
+ UInt32 size;
+ rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size);
+ rd->BufferLim = rd->Buffer + size;
+ if (size == 0)
+ #endif
+ {
+ rd->ExtraBytes = 1;
+ return 0xFF;
+ }
+ }
+ return (*rd->Buffer++);
+}
+
+/* #define ReadByte (*rd->Buffer++) */
+#define ReadByte (RangeDecoderReadByte(rd))
+
+void RangeDecoderInit(CRangeDecoder *rd,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback
+ #else
+ Byte *stream, UInt32 bufferSize
+ #endif
+ )
+{
+ int i;
+ #ifdef _LZMA_IN_CB
+ rd->InCallback = inCallback;
+ rd->Buffer = rd->BufferLim = 0;
+ #else
+ rd->Buffer = stream;
+ rd->BufferLim = stream + bufferSize;
+ #endif
+ rd->ExtraBytes = 0;
+ rd->Code = 0;
+ rd->Range = (0xFFFFFFFF);
+ for(i = 0; i < 5; i++)
+ rd->Code = (rd->Code << 8) | ReadByte;
+}
+
+#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code;
+#define RC_FLUSH_VAR rd->Range = range; rd->Code = code;
+#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; }
+
+UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits)
+{
+ RC_INIT_VAR
+ UInt32 result = 0;
+ int i;
+ for (i = numTotalBits; i > 0; i--)
+ {
+ /* UInt32 t; */
+ range >>= 1;
+
+ result <<= 1;
+ if (code >= range)
+ {
+ code -= range;
+ result |= 1;
+ }
+ /*
+ t = (code - range) >> 31;
+ t &= 1;
+ code -= range & (t - 1);
+ result = (result + result) | (1 - t);
+ */
+ RC_NORMALIZE
+ }
+ RC_FLUSH_VAR
+ return result;
+}
+
+int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd)
+{
+ UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob;
+ if (rd->Code < bound)
+ {
+ rd->Range = bound;
+ *prob += (kBitModelTotal - *prob) >> kNumMoveBits;
+ if (rd->Range < kTopValue)
+ {
+ rd->Code = (rd->Code << 8) | ReadByte;
+ rd->Range <<= 8;
+ }
+ return 0;
+ }
+ else
+ {
+ rd->Range -= bound;
+ rd->Code -= bound;
+ *prob -= (*prob) >> kNumMoveBits;
+ if (rd->Range < kTopValue)
+ {
+ rd->Code = (rd->Code << 8) | ReadByte;
+ rd->Range <<= 8;
+ }
+ return 1;
+ }
+}
+
+#define RC_GET_BIT2(prob, mi, A0, A1) \
+ UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \
+ if (code < bound) \
+ { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \
+ else \
+ { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \
+ RC_NORMALIZE
+
+#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;)
+
+int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
+{
+ int mi = 1;
+ int i;
+ #ifdef _LZMA_LOC_OPT
+ RC_INIT_VAR
+ #endif
+ for(i = numLevels; i > 0; i--)
+ {
+ #ifdef _LZMA_LOC_OPT
+ CProb *prob = probs + mi;
+ RC_GET_BIT(prob, mi)
+ #else
+ mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd);
+ #endif
+ }
+ #ifdef _LZMA_LOC_OPT
+ RC_FLUSH_VAR
+ #endif
+ return mi - (1 << numLevels);
+}
+
+int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
+{
+ int mi = 1;
+ int i;
+ int symbol = 0;
+ #ifdef _LZMA_LOC_OPT
+ RC_INIT_VAR
+ #endif
+ for(i = 0; i < numLevels; i++)
+ {
+ #ifdef _LZMA_LOC_OPT
+ CProb *prob = probs + mi;
+ RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i))
+ #else
+ int bit = RangeDecoderBitDecode(probs + mi, rd);
+ mi = mi + mi + bit;
+ symbol |= (bit << i);
+ #endif
+ }
+ #ifdef _LZMA_LOC_OPT
+ RC_FLUSH_VAR
+ #endif
+ return symbol;
+}
+
+Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd)
+{
+ int symbol = 1;
+ #ifdef _LZMA_LOC_OPT
+ RC_INIT_VAR
+ #endif
+ do
+ {
+ #ifdef _LZMA_LOC_OPT
+ CProb *prob = probs + symbol;
+ RC_GET_BIT(prob, symbol)
+ #else
+ symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
+ #endif
+ }
+ while (symbol < 0x100);
+ #ifdef _LZMA_LOC_OPT
+ RC_FLUSH_VAR
+ #endif
+ return symbol;
+}
+
+Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte)
+{
+ int symbol = 1;
+ #ifdef _LZMA_LOC_OPT
+ RC_INIT_VAR
+ #endif
+ do
+ {
+ int bit;
+ int matchBit = (matchByte >> 7) & 1;
+ matchByte <<= 1;
+ #ifdef _LZMA_LOC_OPT
+ {
+ CProb *prob = probs + ((1 + matchBit) << 8) + symbol;
+ RC_GET_BIT2(prob, symbol, bit = 0, bit = 1)
+ }
+ #else
+ bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd);
+ symbol = (symbol << 1) | bit;
+ #endif
+ if (matchBit != bit)
+ {
+ while (symbol < 0x100)
+ {
+ #ifdef _LZMA_LOC_OPT
+ CProb *prob = probs + symbol;
+ RC_GET_BIT(prob, symbol)
+ #else
+ symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
+ #endif
+ }
+ break;
+ }
+ }
+ while (symbol < 0x100);
+ #ifdef _LZMA_LOC_OPT
+ RC_FLUSH_VAR
+ #endif
+ return symbol;
+}
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
+
+int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState)
+{
+ if(RangeDecoderBitDecode(p + LenChoice, rd) == 0)
+ return RangeDecoderBitTreeDecode(p + LenLow +
+ (posState << kLenNumLowBits), kLenNumLowBits, rd);
+ if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0)
+ return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid +
+ (posState << kLenNumMidBits), kLenNumMidBits, rd);
+ return kLenNumLowSymbols + kLenNumMidSymbols +
+ RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd);
+}
+
+#define kNumStates 12
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+#ifdef _LZMA_OUT_READ
+
+typedef struct _LzmaVarState
+{
+ CRangeDecoder RangeDecoder;
+ Byte *Dictionary;
+ UInt32 DictionarySize;
+ UInt32 DictionaryPos;
+ UInt32 GlobalPos;
+ UInt32 Reps[4];
+ int lc;
+ int lp;
+ int pb;
+ int State;
+ int PreviousIsMatch;
+ int RemainLen;
+} LzmaVarState;
+
+int LzmaDecoderInit(
+ unsigned char *buffer, UInt32 bufferSize,
+ int lc, int lp, int pb,
+ unsigned char *dictionary, UInt32 dictionarySize,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback
+ #else
+ unsigned char *inStream, UInt32 inSize
+ #endif
+ )
+{
+ LzmaVarState *vs = (LzmaVarState *)buffer;
+ CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+ UInt32 i;
+ if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
+ return LZMA_RESULT_NOT_ENOUGH_MEM;
+ vs->Dictionary = dictionary;
+ vs->DictionarySize = dictionarySize;
+ vs->DictionaryPos = 0;
+ vs->GlobalPos = 0;
+ vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
+ vs->lc = lc;
+ vs->lp = lp;
+ vs->pb = pb;
+ vs->State = 0;
+ vs->PreviousIsMatch = 0;
+ vs->RemainLen = 0;
+ dictionary[dictionarySize - 1] = 0;
+ for (i = 0; i < numProbs; i++)
+ p[i] = kBitModelTotal >> 1;
+ RangeDecoderInit(&vs->RangeDecoder,
+ #ifdef _LZMA_IN_CB
+ inCallback
+ #else
+ inStream, inSize
+ #endif
+ );
+ return LZMA_RESULT_OK;
+}
+
+int LzmaDecode(unsigned char *buffer,
+ unsigned char *outStream, UInt32 outSize,
+ UInt32 *outSizeProcessed)
+{
+ LzmaVarState *vs = (LzmaVarState *)buffer;
+ CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+ CRangeDecoder rd = vs->RangeDecoder;
+ int state = vs->State;
+ int previousIsMatch = vs->PreviousIsMatch;
+ Byte previousByte;
+ UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+ UInt32 nowPos = 0;
+ UInt32 posStateMask = (1 << (vs->pb)) - 1;
+ UInt32 literalPosMask = (1 << (vs->lp)) - 1;
+ int lc = vs->lc;
+ int len = vs->RemainLen;
+ UInt32 globalPos = vs->GlobalPos;
+
+ Byte *dictionary = vs->Dictionary;
+ UInt32 dictionarySize = vs->DictionarySize;
+ UInt32 dictionaryPos = vs->DictionaryPos;
+
+ if (len == -1)
+ {
+ *outSizeProcessed = 0;
+ return LZMA_RESULT_OK;
+ }
+
+ while(len > 0 && nowPos < outSize)
+ {
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ len--;
+ }
+ if (dictionaryPos == 0)
+ previousByte = dictionary[dictionarySize - 1];
+ else
+ previousByte = dictionary[dictionaryPos - 1];
+#else
+
+int LzmaDecode(
+ Byte *buffer, UInt32 bufferSize,
+ int lc, int lp, int pb,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback,
+ #else
+ unsigned char *inStream, UInt32 inSize,
+ #endif
+ unsigned char *outStream, UInt32 outSize,
+ UInt32 *outSizeProcessed)
+{
+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+ CProb *p = (CProb *)buffer;
+ CRangeDecoder rd;
+ UInt32 i;
+ int state = 0;
+ int previousIsMatch = 0;
+ Byte previousByte = 0;
+ UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+ UInt32 nowPos = 0;
+ UInt32 posStateMask = (1 << pb) - 1;
+ UInt32 literalPosMask = (1 << lp) - 1;
+ int len = 0;
+ if (bufferSize < numProbs * sizeof(CProb))
+ return LZMA_RESULT_NOT_ENOUGH_MEM;
+ for (i = 0; i < numProbs; i++)
+ p[i] = kBitModelTotal >> 1;
+ RangeDecoderInit(&rd,
+ #ifdef _LZMA_IN_CB
+ inCallback
+ #else
+ inStream, inSize
+ #endif
+ );
+#endif
+
+ *outSizeProcessed = 0;
+ while(nowPos < outSize)
+ {
+ int posState = (int)(
+ (nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ & posStateMask);
+ #ifdef _LZMA_IN_CB
+ if (rd.Result != LZMA_RESULT_OK)
+ return rd.Result;
+ #endif
+ if (rd.ExtraBytes != 0)
+ return LZMA_RESULT_DATA_ERROR;
+ if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0)
+ {
+ CProb *probs = p + Literal + (LZMA_LIT_SIZE *
+ (((
+ (nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+ if (state < 4) state = 0;
+ else if (state < 10) state -= 3;
+ else state -= 6;
+ if (previousIsMatch)
+ {
+ Byte matchByte;
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ matchByte = dictionary[pos];
+ #else
+ matchByte = outStream[nowPos - rep0];
+ #endif
+ previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte);
+ previousIsMatch = 0;
+ }
+ else
+ previousByte = LzmaLiteralDecode(probs, &rd);
+ outStream[nowPos++] = previousByte;
+ #ifdef _LZMA_OUT_READ
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #endif
+ }
+ else
+ {
+ previousIsMatch = 1;
+ if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1)
+ {
+ if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0)
+ {
+ if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0)
+ {
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos;
+ #endif
+ if (
+ (nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ == 0)
+ return LZMA_RESULT_DATA_ERROR;
+ state = state < 7 ? 9 : 11;
+ #ifdef _LZMA_OUT_READ
+ pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ previousByte = dictionary[pos];
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #else
+ previousByte = outStream[nowPos - rep0];
+ #endif
+ outStream[nowPos++] = previousByte;
+ continue;
+ }
+ }
+ else
+ {
+ UInt32 distance;
+ if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0)
+ distance = rep1;
+ else
+ {
+ if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0)
+ distance = rep2;
+ else
+ {
+ distance = rep3;
+ rep3 = rep2;
+ }
+ rep2 = rep1;
+ }
+ rep1 = rep0;
+ rep0 = distance;
+ }
+ len = LzmaLenDecode(p + RepLenCoder, &rd, posState);
+ state = state < 7 ? 8 : 11;
+ }
+ else
+ {
+ int posSlot;
+ rep3 = rep2;
+ rep2 = rep1;
+ rep1 = rep0;
+ state = state < 7 ? 7 : 10;
+ len = LzmaLenDecode(p + LenCoder, &rd, posState);
+ posSlot = RangeDecoderBitTreeDecode(p + PosSlot +
+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
+ kNumPosSlotBits), kNumPosSlotBits, &rd);
+ if (posSlot >= kStartPosModelIndex)
+ {
+ int numDirectBits = ((posSlot >> 1) - 1);
+ rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits);
+ if (posSlot < kEndPosModelIndex)
+ {
+ rep0 += RangeDecoderReverseBitTreeDecode(
+ p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd);
+ }
+ else
+ {
+ rep0 += RangeDecoderDecodeDirectBits(&rd,
+ numDirectBits - kNumAlignBits) << kNumAlignBits;
+ rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd);
+ }
+ }
+ else
+ rep0 = posSlot;
+ rep0++;
+ }
+ if (rep0 == (UInt32)(0))
+ {
+ /* it's for stream version */
+ len = -1;
+ break;
+ }
+ if (rep0 > nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ {
+ return LZMA_RESULT_DATA_ERROR;
+ }
+ len += kMatchMinLen;
+ do
+ {
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ previousByte = dictionary[pos];
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #else
+ previousByte = outStream[nowPos - rep0];
+ #endif
+ outStream[nowPos++] = previousByte;
+ len--;
+ }
+ while(len > 0 && nowPos < outSize);
+ }
+ }
+
+ #ifdef _LZMA_OUT_READ
+ vs->RangeDecoder = rd;
+ vs->DictionaryPos = dictionaryPos;
+ vs->GlobalPos = globalPos + nowPos;
+ vs->Reps[0] = rep0;
+ vs->Reps[1] = rep1;
+ vs->Reps[2] = rep2;
+ vs->Reps[3] = rep3;
+ vs->State = state;
+ vs->PreviousIsMatch = previousIsMatch;
+ vs->RemainLen = len;
+ #endif
+
+ *outSizeProcessed = nowPos;
+ return LZMA_RESULT_OK;
+}
--- /dev/null
+/*
+ LzmaDecode.h
+ LZMA Decoder interface
+
+ LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
+ http://www.7-zip.org/
+
+ LZMA SDK is licensed under two licenses:
+ 1) GNU Lesser General Public License (GNU LGPL)
+ 2) Common Public License (CPL)
+ It means that you can select one of these two licenses and
+ follow rules of that license.
+
+ SPECIAL EXCEPTION:
+ Igor Pavlov, as the author of this code, expressly permits you to
+ statically or dynamically link your code (or bind by name) to the
+ interfaces of this file without subjecting your linked code to the
+ terms of the CPL or GNU LGPL. Any modifications or additions
+ to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs,
+ but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+#ifndef UInt32
+#ifdef _LZMA_UINT32_IS_ULONG
+#define UInt32 unsigned long
+#else
+#define UInt32 unsigned int
+#endif
+#endif
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb unsigned short
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+#define LZMA_RESULT_NOT_ENOUGH_MEM 2
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+ int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+/*
+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
+bufferSize += 100 in case of _LZMA_OUT_READ
+by default CProb is unsigned short,
+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
+*/
+
+#ifdef _LZMA_OUT_READ
+int LzmaDecoderInit(
+ unsigned char *buffer, UInt32 bufferSize,
+ int lc, int lp, int pb,
+ unsigned char *dictionary, UInt32 dictionarySize,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback
+ #else
+ unsigned char *inStream, UInt32 inSize
+ #endif
+);
+#endif
+
+int LzmaDecode(
+ unsigned char *buffer,
+ #ifndef _LZMA_OUT_READ
+ UInt32 bufferSize,
+ int lc, int lp, int pb,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback,
+ #else
+ unsigned char *inStream, UInt32 inSize,
+ #endif
+ #endif
+ unsigned char *outStream, UInt32 outSize,
+ UInt32 *outSizeProcessed);
+
+#endif
--- /dev/null
+#
+# Makefile for Broadcom BCM947XX boards
+#
+# Copyright 2001-2003, Broadcom Corporation
+# All Rights Reserved.
+#
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# Copyright 2004 Manuel Novoa III <mjn3@codepoet.org>
+# Modified to support bzip'd kernels.
+# Of course, it would be better to integrate bunzip capability into CFE.
+#
+# Copyright 2005 Oleg I. Vdovikin <oleg@cs.msu.su>
+# Cleaned up, modified for lzma support, removed from kernel
+#
+
+TEXT_START := 0x80001000
+BZ_TEXT_START := 0x80300000
+
+OBJCOPY := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
+
+CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
+ -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
+ -ffunction-sections -pipe -mlong-calls -fno-common \
+ -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
+CFLAGS += -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB
+
+ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START)
+
+SEDFLAGS := s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/
+
+OBJECTS := head.o data.o
+
+all: loader.gz loader.elf
+
+# Don't build dependencies, this may die if $(CC) isn't gcc
+dep:
+
+install:
+
+loader.gz: loader
+ gzip -nc9 $< > $@
+
+loader.elf: loader.o
+ cp $< $@
+
+loader: loader.o
+ $(OBJCOPY) $< $@
+
+loader.o: loader.lds $(OBJECTS)
+ $(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS)
+
+loader.lds: loader.lds.in Makefile
+ @sed "$(SEDFLAGS)" < $< > $@
+
+data.o: data.lds decompress.image
+ $(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips
+
+data.lds:
+ @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@
+
+decompress.image: decompress
+ $(OBJCOPY) $< $@
+
+decompress: decompress.lds decompress.o LzmaDecode.o
+ $(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o
+
+decompress.lds: decompress.lds.in Makefile
+ @sed "$(SEDFLAGS)" < $< > $@
+
+mrproper: clean
+
+clean:
+ rm -f loader.gz loader decompress *.lds *.o *.image
--- /dev/null
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+The code is intended to decompress kernel, being compressed using lzma utility
+build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory
+
+decompressor code expects that your .trx file consist of three partitions:
+
+1) decompressor itself (this is gziped code which pmon/cfe will extract and run
+on boot-up instead of real kernel)
+2) LZMA compressed kernel (both streamed and regular modes are supported now)
+3) Root filesystem
+
+Please be sure to apply the following patch for use this new trx layout (it will
+allow using both new and old trx files for root filesystem lookup code)
+
+--- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300
++++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300
+@@ -221,7 +221,9 @@
+ /* Try looking at TRX header for rootfs offset */
+ if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+ bcm947xx_parts[1].offset = off;
+- if (le32_to_cpu(trx->offsets[1]) > off)
++ if (le32_to_cpu(trx->offsets[2]) > off)
++ off = le32_to_cpu(trx->offsets[2]);
++ else if (le32_to_cpu(trx->offsets[1]) > off)
+ off = le32_to_cpu(trx->offsets[1]);
+ continue;
+ }
+
+
+Revision history:
+ 0.02 Initial release
+ 0.03 Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual
+ output size to decoder (stream mode compressed input is not
+ a requirement anymore)
+ 0.04 Reordered functions using lds script
--- /dev/null
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Please note, this was code based on the bunzip2 decompressor code
+ * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left
+ * is an idea and part of original vendor code
+ *
+ *
+ * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com>
+ * pass actual output size to decoder (stream mode
+ * compressed input is not a requirement anymore)
+ *
+ * 24-Apr-2005 Oleg I. Vdovikin
+ * reordered functions using lds script, removed forward decl
+ *
+ * 24-Mar-2007 Gabor Juhos
+ * pass original values of the a0,a1,a2,a3 registers to the kernel
+ *
+ */
+
+#include "LzmaDecode.h"
+
+#define BCM4710_FLASH 0x1fc00000 /* Flash */
+
+#define KSEG0 0x80000000
+#define KSEG1 0xa0000000
+
+#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
+
+#define Index_Invalidate_I 0x00
+#define Index_Writeback_Inv_D 0x01
+
+#define cache_unroll(base,op) \
+ __asm__ __volatile__( \
+ ".set noreorder;\n" \
+ ".set mips3;\n" \
+ "cache %1, (%0);\n" \
+ ".set mips0;\n" \
+ ".set reorder\n" \
+ : \
+ : "r" (base), \
+ "i" (op));
+
+static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
+{
+ unsigned long start = KSEG0;
+ unsigned long end = (start + size);
+
+ while(start < end) {
+ cache_unroll(start,Index_Invalidate_I);
+ start += lsize;
+ }
+}
+
+static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
+{
+ unsigned long start = KSEG0;
+ unsigned long end = (start + size);
+
+ while(start < end) {
+ cache_unroll(start,Index_Writeback_Inv_D);
+ start += lsize;
+ }
+}
+
+#define TRX_MAGIC 0x30524448 /* "HDR0" */
+
+struct trx_header {
+ unsigned int magic; /* "HDR0" */
+ unsigned int len; /* Length of file including header */
+ unsigned int crc32; /* 32-bit CRC from flag_version to end of file */
+ unsigned int flag_version; /* 0:15 flags, 16:31 version */
+ unsigned int offsets[3]; /* Offsets of partitions from start of header */
+};
+
+/* beyound the image end, size not known in advance */
+extern unsigned char workspace[];
+
+unsigned int offset;
+unsigned char *data;
+
+typedef void (*kernel_entry)(unsigned long reg_a0, unsigned long reg_a1,
+ unsigned long reg_a2, unsigned long reg_a3);
+
+/* flash access should be aligned, so wrapper is used */
+/* read byte from the flash, all accesses are 32-bit aligned */
+static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
+{
+ static unsigned int val;
+
+ if (((unsigned int)offset % 4) == 0) {
+ val = *(unsigned int *)data;
+ data += 4;
+ }
+
+ *bufferSize = 1;
+ *buffer = ((unsigned char *)&val) + (offset++ & 3);
+
+ return LZMA_RESULT_OK;
+}
+
+static __inline__ unsigned char get_byte(void)
+{
+ unsigned char *buffer;
+ UInt32 fake;
+
+ return read_byte(0, &buffer, &fake), *buffer;
+}
+
+/* should be the first function */
+void entry(unsigned long reg_a0, unsigned long reg_a1,
+ unsigned long reg_a2, unsigned long reg_a3,
+ unsigned long icache_size, unsigned long icache_lsize,
+ unsigned long dcache_size, unsigned long dcache_lsize)
+{
+ unsigned int i; /* temp value */
+ unsigned int lc; /* literal context bits */
+ unsigned int lp; /* literal pos state bits */
+ unsigned int pb; /* pos state bits */
+ unsigned int osize; /* uncompressed size */
+
+ ILzmaInCallback callback;
+ callback.Read = read_byte;
+
+ uart_write_str("decompress kernel ... ");
+
+ /* look for trx header, 32-bit data access */
+ for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH));
+ ((struct trx_header *)data)->magic != TRX_MAGIC; data += 65536);
+
+ /* compressed kernel is in the partition 0 or 1 */
+ if (((struct trx_header *)data)->offsets[1] > 65536)
+ data += ((struct trx_header *)data)->offsets[0];
+ else
+ data += ((struct trx_header *)data)->offsets[1];
+
+ offset = 0;
+
+ /* lzma args */
+ i = get_byte();
+ lc = i % 9, i = i / 9;
+ lp = i % 5, pb = i / 5;
+
+ /* skip rest of the LZMA coder property */
+ for (i = 0; i < 4; i++)
+ get_byte();
+
+ /* read the lower half of uncompressed size in the header */
+ osize = ((unsigned int)get_byte()) +
+ ((unsigned int)get_byte() << 8) +
+ ((unsigned int)get_byte() << 16) +
+ ((unsigned int)get_byte() << 24);
+
+ /* skip rest of the header (upper half of uncompressed size) */
+ for (i = 0; i < 4; i++)
+ get_byte();
+
+ /* decompress kernel */
+ if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback,
+ (unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK)
+ {
+ blast_dcache(dcache_size, dcache_lsize);
+ blast_icache(icache_size, icache_lsize);
+
+ /* Jump to load address */
+ uart_write_str("ok\r\n");
+ ((kernel_entry) LOADADDR)(reg_a0, reg_a1, reg_a2, reg_a3);
+ }
+ uart_write_str("failed\r\n");
+ while (1 );
+}
+
+/* *********************************************************************
+ *
+ * ADM5120 UART driver File: dev_adm_uart.c
+ *
+ * This is a console device driver for an ADM5120 UART
+ *
+ *********************************************************************
+ *
+ * Copyright 2006
+ * Compex Systems. All rights reserved.
+ *
+ ********************************************************************* */
+
+#define READCSR(r) *(volatile UInt32 *)(0xB2600000+(r))
+#define WRITECSR(r,v) *(volatile UInt32 *)(0xB2600000+(r)) = v
+
+#define UART_DR_REG 0x00
+#define UART_FR_REG 0x18
+#define UART_TX_FIFO_FULL 0x20
+
+int uart_write(int val)
+{
+ WRITECSR(UART_DR_REG, val);
+ while ( (READCSR(UART_FR_REG) & UART_TX_FIFO_FULL) );
+ return 0;
+}
+
+int uart_write_str(char * str)
+{
+ while ( *str != 0 ) {
+ uart_write ( *str++ );
+ }
+ return 0;
+}
+
+int uart_write_hex(int val)
+{
+ int i;
+ int tmp;
+
+ uart_write_str("0x");
+ for ( i=0 ; i<8 ; i++ ) {
+ tmp = (val >> ((7-i) * 4 )) & 0xf;
+ tmp = tmp < 10 ? (tmp + '0') : (tmp + 'A' - 10);
+ uart_write(tmp);
+ }
+ uart_write_str("\r\n");
+ return 0;
+}
+
--- /dev/null
+OUTPUT_ARCH(mips)
+ENTRY(entry)
+SECTIONS {
+ . = BZ_TEXT_START;
+ .text : {
+ *(.text.entry)
+ *(.text)
+ *(.rodata)
+ }
+
+ .data : {
+ *(.data)
+ }
+
+ .bss : {
+ *(.bss)
+ }
+
+ workspace = .;
+}
--- /dev/null
+/* Copyright 2007 Gabor Juhos */
+/* keep original values of the a0,a1,a2,a3 registers */
+/* cache manipulation adapted from Broadcom code */
+/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */
+/* cache manipulation adapted from Broadcom code */
+/* idea taken from original bunzip2 decompressor code */
+/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */
+/* Licensed under the linux kernel's version of the GPL.*/
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#define KSEG0 0x80000000
+
+#define C0_CONFIG $16
+#define C0_TAGLO $28
+#define C0_TAGHI $29
+
+#define CONF1_DA_SHIFT 7 /* D$ associativity */
+#define CONF1_DA_MASK 0x00000380
+#define CONF1_DA_BASE 1
+#define CONF1_DL_SHIFT 10 /* D$ line size */
+#define CONF1_DL_MASK 0x00001c00
+#define CONF1_DL_BASE 2
+#define CONF1_DS_SHIFT 13 /* D$ sets/way */
+#define CONF1_DS_MASK 0x0000e000
+#define CONF1_DS_BASE 64
+#define CONF1_IA_SHIFT 16 /* I$ associativity */
+#define CONF1_IA_MASK 0x00070000
+#define CONF1_IA_BASE 1
+#define CONF1_IL_SHIFT 19 /* I$ line size */
+#define CONF1_IL_MASK 0x00380000
+#define CONF1_IL_BASE 2
+#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
+#define CONF1_IS_MASK 0x01c00000
+#define CONF1_IS_BASE 64
+
+#define Index_Invalidate_I 0x00
+#define Index_Writeback_Inv_D 0x01
+
+ .text
+ LEAF(startup)
+ .set noreorder
+
+ /* Copy decompressor code to the right place */
+ li t0, BZ_TEXT_START
+
+ la t1, code_start
+ la t2, code_stop
+$L1:
+ lw t3, 0(t1)
+ sw t3, 0(t0)
+ add t1, 4
+ blt t1, t2, $L1
+ add t0, 4
+
+ /* At this point we need to invalidate dcache and */
+ /* icache before jumping to new code */
+
+1: /* Get cache sizes */
+ .set mips32
+ mfc0 s0,C0_CONFIG,1
+ .set mips0
+
+ li s1,CONF1_DL_MASK
+ and s1,s0
+ beq s1,zero,nodc
+ nop
+
+ srl s1,CONF1_DL_SHIFT
+ li t0,CONF1_DL_BASE
+ sll s1,t0,s1 /* s1 has D$ cache line size */
+
+ li s2,CONF1_DA_MASK
+ and s2,s0
+ srl s2,CONF1_DA_SHIFT
+ addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */
+
+ li t0,CONF1_DS_MASK
+ and t0,s0
+ srl t0,CONF1_DS_SHIFT
+ li s3,CONF1_DS_BASE
+ sll s3,s3,t0 /* s3 has D$ sets per way */
+
+ multu s2,s3 /* sets/way * associativity */
+ mflo t0 /* total cache lines */
+
+ multu s1,t0 /* D$ linesize * lines */
+ mflo s2 /* s2 is now D$ size in bytes */
+
+ /* Initilize the D$: */
+ mtc0 zero,C0_TAGLO
+ mtc0 zero,C0_TAGHI
+
+ li t0,KSEG0 /* Just an address for the first $ line */
+ addu t1,t0,s2 /* + size of cache == end */
+
+ .set mips3
+1: cache Index_Writeback_Inv_D,0(t0)
+ .set mips0
+ bne t0,t1,1b
+ addu t0,s1
+
+nodc:
+ /* Now we get to do it all again for the I$ */
+
+ move s3,zero /* just in case there is no icache */
+ move s4,zero
+
+ li t0,CONF1_IL_MASK
+ and t0,s0
+ beq t0,zero,noic
+ nop
+
+ srl t0,CONF1_IL_SHIFT
+ li s3,CONF1_IL_BASE
+ sll s3,t0 /* s3 has I$ cache line size */
+
+ li t0,CONF1_IA_MASK
+ and t0,s0
+ srl t0,CONF1_IA_SHIFT
+ addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */
+
+ li t0,CONF1_IS_MASK
+ and t0,s0
+ srl t0,CONF1_IS_SHIFT
+ li s5,CONF1_IS_BASE
+ sll s5,t0 /* s5 has I$ sets per way */
+
+ multu s4,s5 /* sets/way * associativity */
+ mflo t0 /* s4 is now total cache lines */
+
+ multu s3,t0 /* I$ linesize * lines */
+ mflo s4 /* s4 is cache size in bytes */
+
+ /* Initilize the I$: */
+ mtc0 zero,C0_TAGLO
+ mtc0 zero,C0_TAGHI
+
+ li t0,KSEG0 /* Just an address for the first $ line */
+ addu t1,t0,s4 /* + size of cache == end */
+
+ .set mips3
+1: cache Index_Invalidate_I,0(t0)
+ .set mips0
+ bne t0,t1,1b
+ addu t0,s3
+
+noic:
+ li t0, BZ_TEXT_START
+
+ addiu sp, -32 /* reserve stack for parameters */
+#if 0
+ sw a0, 0(sp)
+ sw a1, 4(sp)
+ sw a2, 8(sp)
+ sw a3, 12(sp)
+#endif
+ sw s3, 16(sp) /* icache line size */
+ sw s4, 20(sp) /* icache size */
+ sw s1, 24(sp) /* dcache line size */
+ jr t0
+ sw s2, 28(sp) /* dcache size */
+
+ .set reorder
+ END(startup)
--- /dev/null
+OUTPUT_ARCH(mips)
+ENTRY(startup)
+SECTIONS {
+ . = TEXT_START;
+ .text : {
+ *(.text)
+ *(.rodata)
+ }
+
+ .data : {
+ *(.data)
+ }
+
+ .bss : {
+ *(.bss)
+ }
+}
--- /dev/null
+diff -urN linux-2.6.19.2/arch/mips/Kconfig linux-2.6.19.2.new/arch/mips/Kconfig
+--- linux-2.6.19.2/arch/mips/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2.new/arch/mips/Kconfig 2007-01-23 14:49:38.000000000 +0100
+@@ -12,6 +12,18 @@
+ prompt "System type"
+ default SGI_IP22
+
++config MIPS_ADM5120
++ bool "Support for ADM5120 SoC"
++ select SYS_HAS_CPU_MIPS32_R1
++ select DMA_NONCOHERENT
++ select HW_HAS_PCI
++ select SYS_SUPPORTS_LITTLE_ENDIAN
++ select SYS_SUPPORTS_32BIT_KERNEL
++
++config PCI_ADM5120
++ bool "Add PCI control support for ADM5120"
++ depends on MIPS_ADM5120 && PCI
++
+ config MIPS_MTX1
+ bool "4G Systems MTX-1 board"
+ select DMA_NONCOHERENT
+diff -urN linux-2.6.19.2/arch/mips/Makefile linux-2.6.19.2.new/arch/mips/Makefile
+--- linux-2.6.19.2/arch/mips/Makefile 2007-01-23 14:02:57.000000000 +0100
++++ linux-2.6.19.2.new/arch/mips/Makefile 2007-01-23 14:49:39.000000000 +0100
+@@ -165,6 +165,14 @@
+ load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
+
+ #
++# ADMtek 5120
++#
++
++core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/
++cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120
++load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80101000
++
++#
+ # Common Alchemy Au1x00 stuff
+ #
+ core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
+diff -urN linux-2.6.19.2/arch/mips/pci/Makefile linux-2.6.19.2.new/arch/mips/pci/Makefile
+--- linux-2.6.19.2/arch/mips/pci/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2.new/arch/mips/pci/Makefile 2007-01-23 14:49:40.000000000 +0100
+@@ -53,3 +53,4 @@
+ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
+ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
+ obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
++obj-$(CONFIG_PCI_ADM5120) += ops-adm5120.o pci-adm5120.o
+diff -urN linux-2.6.19.2/include/asm-mips/bootinfo.h linux-2.6.19.2.new/include/asm-mips/bootinfo.h
+--- linux-2.6.19.2/include/asm-mips/bootinfo.h 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2.new/include/asm-mips/bootinfo.h 2007-01-23 14:49:40.000000000 +0100
+@@ -212,6 +212,12 @@
+ #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
+ #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
+
++/*
++ * Valid machtype for group ADMtek
++ */
++#define MACH_GROUP_ADM_GW 23
++#define MACH_ADM_GW_5120 0
++
+ #define CL_SIZE COMMAND_LINE_SIZE
+
+ const char *get_system_type(void);
--- /dev/null
+diff -urN linux-2.6.19.2/drivers/mtd/maps/Kconfig linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig
+--- linux-2.6.19.2/drivers/mtd/maps/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig 2007-01-23 01:13:39.000000000 +0100
+@@ -622,5 +622,10 @@
+
+ This selection automatically selects the map_ram driver.
+
++config MTD_ADM5120
++ tristate "Map driver for ADMtek ADM5120 boards"
++ depends on MIPS_ADM5120
++ select MTD_CFI_AMDSTD
++
+ endmenu
+
+diff -urN linux-2.6.19.2/drivers/mtd/maps/Makefile linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile
+--- linux-2.6.19.2/drivers/mtd/maps/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile 2007-01-23 01:20:52.000000000 +0100
+@@ -43,6 +43,7 @@
+ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
+ obj-$(CONFIG_MTD_PCI) += pci.o
+ obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
++obj-$(CONFIG_MTD_ADM5120) += adm5120_mtd.o
+ obj-$(CONFIG_MTD_LASAT) += lasat.o
+ obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
+ obj-$(CONFIG_MTD_EDB7312) += edb7312.o
--- /dev/null
+diff -urN linux-2.6.19.2/drivers/net/Kconfig linux-2.6.19.2-adm5120/drivers/net/Kconfig
+--- linux-2.6.19.2/drivers/net/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/net/Kconfig 2007-01-23 01:13:39.000000000 +0100
+@@ -450,6 +450,10 @@
+ If you have an Alchemy Semi AU1X00 based system
+ say Y. Otherwise, say N.
+
++config MIPS_ADM5120_ENET
++ tristate "MIPS ADM5120 Ethernet switch support"
++ depends on NET_ETHERNET && MIPS_ADM5120
++
+ config NET_SB1250_MAC
+ tristate "SB1250 Ethernet support"
+ depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
+diff -urN linux-2.6.19.2/drivers/net/Makefile linux-2.6.19.2-adm5120/drivers/net/Makefile
+--- linux-2.6.19.2/drivers/net/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/net/Makefile 2007-01-23 01:13:39.000000000 +0100
+@@ -164,6 +164,7 @@
+ # This is also a 82596 and should probably be merged
+ obj-$(CONFIG_LP486E) += lp486e.o
+
++obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
+ obj-$(CONFIG_ETH16I) += eth16i.o
+ obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
+ obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
--- /dev/null
+diff -urN linux-2.6.19.2/drivers/serial/Kconfig linux-2.6.19.2-adm5120/drivers/serial/Kconfig
+--- linux-2.6.19.2/drivers/serial/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/serial/Kconfig 2007-01-23 01:13:39.000000000 +0100
+@@ -246,6 +246,22 @@
+
+ comment "Non-8250 serial port support"
+
++config SERIAL_ADM5120
++ bool "ADM5120 serial port support"
++ depends on MIPS_ADM5120
++ select SERIAL_CORE
++ select SERIAL_CORE_CONSOLE
++ help
++ Driver for the on chip UARTs on the ADM5120 SoC
++
++config ADM5120_NR_UARTS
++ int "Maximum number of ADM5120 serial ports"
++ depends on SERIAL_ADM5120
++ default "2"
++ ---help---
++ Set this to the number of serial ports you want the driver to
++ support.
++
+ config SERIAL_AMBA_PL010
+ tristate "ARM AMBA PL010 serial port support"
+ depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
+diff -urN linux-2.6.19.2/drivers/serial/Makefile linux-2.6.19.2-adm5120/drivers/serial/Makefile
+--- linux-2.6.19.2/drivers/serial/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/serial/Makefile 2007-01-23 01:21:45.000000000 +0100
+@@ -20,6 +20,7 @@
+ obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
+ obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
+ obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
++obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
+ obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
+ obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
+ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
+diff -urN linux-2.6.19.2/include/linux/serial_core.h linux-2.6.19.2-adm5120/include/linux/serial_core.h
+--- linux-2.6.19.2/include/linux/serial_core.h 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/include/linux/serial_core.h 2007-01-23 01:13:39.000000000 +0100
+@@ -133,6 +133,9 @@
+ #define PORT_S3C2412 73
+
+
++/* ADMtek ADM5120 SoC */
++#define PORT_ADM5120 68
++
+ #ifdef __KERNEL__
+
+ #include <linux/compiler.h>
--- /dev/null
+diff -urN linux-2.6.19.2/drivers/usb/core/hub.c linux-2.6.19.2-adm5120/drivers/usb/core/hub.c
+--- linux-2.6.19.2/drivers/usb/core/hub.c 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/core/hub.c 2007-01-23 01:13:39.000000000 +0100
+@@ -2156,6 +2156,8 @@
+ USB_DT_DEVICE << 8, 0,
+ buf, GET_DESCRIPTOR_BUFSIZE,
+ (i ? USB_CTRL_GET_TIMEOUT : 1000));
++printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
++buf->bDescriptorType, USB_DT_DEVICE);
+ switch (buf->bMaxPacketSize0) {
+ case 8: case 16: case 32: case 64: case 255:
+ if (buf->bDescriptorType ==
+diff -urN linux-2.6.19.2/drivers/usb/host/Kconfig linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig
+--- linux-2.6.19.2/drivers/usb/host/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig 2007-01-23 01:13:39.000000000 +0100
+@@ -192,3 +192,6 @@
+ To compile this driver as a module, choose M here: the
+ module will be called "sl811_cs".
+
++config USB_ADM5120_HCD
++ tristate "ADM5120 HCD support"
++ depends on USB && MIPS_ADM5120
+diff -urN linux-2.6.19.2/drivers/usb/host/Makefile linux-2.6.19.2-adm5120/drivers/usb/host/Makefile
+--- linux-2.6.19.2/drivers/usb/host/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/host/Makefile 2007-01-23 01:13:39.000000000 +0100
+@@ -16,3 +16,4 @@
+ obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
+ obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
+ obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o
++obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
+diff -urN linux-2.6.19.2/drivers/usb/Kconfig linux-2.6.19.2-adm5120/drivers/usb/Kconfig
+--- linux-2.6.19.2/drivers/usb/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/Kconfig 2007-01-23 01:13:39.000000000 +0100
+@@ -91,8 +91,6 @@
+
+ source "drivers/usb/net/Kconfig"
+
+-source "drivers/usb/mon/Kconfig"
+-
+ comment "USB port drivers"
+ depends on USB
+
+diff -urN linux-2.6.19.2/drivers/usb/Makefile linux-2.6.19.2-adm5120/drivers/usb/Makefile
+--- linux-2.6.19.2/drivers/usb/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/usb/Makefile 2007-01-23 01:22:18.000000000 +0100
+@@ -17,6 +17,7 @@
+ obj-$(CONFIG_USB_U132_HCD) += host/
+ obj-$(CONFIG_ETRAX_USB_HOST) += host/
+ obj-$(CONFIG_USB_OHCI_AT91) += host/
++obj-$(CONFIG_USB_ADM5120_HCD) += host/
+
+ obj-$(CONFIG_USB_ACM) += class/
+ obj-$(CONFIG_USB_PRINTER) += class/
--- /dev/null
+diff -urN linux-2.6.19.2/drivers/char/Kconfig linux-2.6.19.2-adm5120/drivers/char/Kconfig
+--- linux-2.6.19.2/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/char/Kconfig 2007-01-23 01:13:39.000000000 +0100
+@@ -1034,7 +1034,9 @@
+ The mmtimer device allows direct userspace access to the
+ Altix system timer.
+
+-source "drivers/char/tpm/Kconfig"
++config ADM5120_GPIO
++ tristate "ADM5120 GPIO"
++ depends on MIPS_ADM5120
+
+ config TELCLOCK
+ tristate "Telecom clock driver for MPBL0010 ATCA SBC"
+diff -urN linux-2.6.19.2/drivers/char/Makefile linux-2.6.19.2-adm5120/drivers/char/Makefile
+--- linux-2.6.19.2/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-adm5120/drivers/char/Makefile 2007-01-23 01:20:01.000000000 +0100
+@@ -90,6 +90,7 @@
+ obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
+ obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
+ obj-$(CONFIG_TELCLOCK) += tlclk.o
++obj-$(CONFIG_ADM5120_GPIO) += adm5120_gpio.o
+
+ obj-$(CONFIG_WATCHDOG) += watchdog/
+ obj-$(CONFIG_MWAVE) += mwave/
--- /dev/null
+diff -Nur linux-2.6.19.2/drivers/mtd/Kconfig.old linux-2.6.19.2/drivers/mtd/Kconfig
+--- linux-2.6.19.2/drivers/mtd/Kconfig.old 2007-03-25 08:13:02.000000000 +0200
++++ linux-2.6.19.2/drivers/mtd/Kconfig 2007-03-26 13:37:47.000000000 +0200
+@@ -157,6 +157,22 @@
+ for your particular device. It won't happen automatically. The
+ 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
+
++config MTD_MYLOADER_PARTS
++ tristate "MyLoader partition parsing"
++ depends on MIPS_ADM5120 && MTD_PARTITIONS
++ ---help---
++ MyLoader is a bootloader which allows the user to define partitions
++ in flash devices, by putting a table in the second erase block
++ on the device, similar to a partition table. This table gives the
++ offsets and lengths of the user defined partitions.
++
++ If you need code which can detect and parse these tables, and
++ register MTD 'partitions' corresponding to each image detected,
++ enable this option.
++
++ You will still need the parsing functions to be called by the driver
++ for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+ depends on MTD
+
+diff -Nur linux-2.6.19.2/drivers/mtd/Makefile.old linux-2.6.19.2/drivers/mtd/Makefile
+--- linux-2.6.19.2/drivers/mtd/Makefile.old 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2/drivers/mtd/Makefile 2007-03-26 13:28:23.000000000 +0200
+@@ -12,6 +12,7 @@
+ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR) += mtdchar.o
--- /dev/null
+--- linux-2.6.19.2/drivers/mtd/chips/Kconfig.old 2007-01-11 03:10:36.000000000 +0800
++++ linux-2.6.19.2/drivers/mtd/chips/Kconfig 2007-03-29 14:43:32.000000000 +0800
+@@ -199,6 +199,14 @@
+ provides support for one of those command sets, used on chips
+ including the AMD Am29LV320.
+
++config MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT
++ bool "Force bottom boot for Macronix flash chips"
++ depends on MTD_CFI_AMDSTD
++ help
++ Some Macronix flash chips have wrong CFI info, and the driver may
++ detect the type incorrectly. Select this if the chip part number
++ ends with BTC.
++
+ config MTD_CFI_STAA
+ tristate "Support for ST (Advanced Architecture) flash chips"
+ depends on MTD_GEN_PROBE
+--- linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c.old 2007-03-22 16:14:56.000000000 +0800
++++ linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c 2007-03-29 14:07:28.000000000 +0800
+@@ -320,6 +320,11 @@
+ cfi_tell_features(extp);
+ #endif
+
++#ifdef CONFIG_MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT
++ extp->TopBottom = 2;
++ bootloc = extp->TopBottom;
++#endif
++
+ bootloc = extp->TopBottom;
+ if ((bootloc != 2) && (bootloc != 3)) {
+ printk(KERN_WARNING "%s: CFI does not contain boot "
--- /dev/null
+diff -urN linux.old/drivers/block/Kconfig linux.dev/drivers/block/Kconfig
+--- linux.old/drivers/block/Kconfig 2006-10-26 02:43:39.000000000 +0200
++++ linux.dev/drivers/block/Kconfig 2006-10-26 00:11:14.000000000 +0200
+@@ -456,4 +456,12 @@
+ This driver provides Support for ATA over Ethernet block
+ devices like the Coraid EtherDrive (R) Storage Blade.
+
++config BLK_DEV_CF_MIPS
++ bool "CF slot of RB532 board"
++ depends on MIKROTIK_RB500 || MIPS_ADM5120
++ default y
++ help
++ The Routerboard 532 has a CF slot on it. Enable the special block
++ device driver for it.
++
+ endmenu
+diff -urN linux.old/drivers/block/Makefile linux.dev/drivers/block/Makefile
+--- linux.old/drivers/block/Makefile 2006-06-18 03:49:35.000000000 +0200
++++ linux.dev/drivers/block/Makefile 2006-10-26 02:44:10.000000000 +0200
+@@ -29,4 +29,5 @@
+ obj-$(CONFIG_VIODASD) += viodasd.o
+ obj-$(CONFIG_BLK_DEV_SX8) += sx8.o
+ obj-$(CONFIG_BLK_DEV_UB) += ub.o
++obj-$(CONFIG_BLK_DEV_CF_MIPS) += rb500/
+
+diff -urN linux.old/drivers/block/rb500/ata.c linux.dev/drivers/block/rb500/ata.c
+--- linux.old/drivers/block/rb500/ata.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/block/rb500/ata.c 2006-10-26 00:11:14.000000000 +0200
+@@ -0,0 +1,485 @@
++/* CF-mips driver
++ This is a block driver for the direct (mmaped) interface to the CF-slot,
++ found in Routerboard.com's RB532 board
++ See SDK provided from routerboard.com.
++
++ Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6.
++ Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org>
++
++ This work is redistributed under the terms of the GNU General Public License.
++*/
++
++#include <linux/kernel.h> /* printk() */
++#include <linux/module.h> /* module to be loadable */
++#include <linux/delay.h>
++#include <linux/sched.h>
++#include <linux/pci.h>
++#include <linux/ioport.h> /* request_mem_region() */
++#include <asm/unaligned.h> /* ioremap() */
++#include <asm/io.h> /* ioremap() */
++#include <asm/rc32434/rb.h>
++
++#include "ata.h"
++
++#define REQUEST_MEM_REGION 0
++#define DEBUG 1
++
++#if DEBUG
++#define DEBUGP printk
++#else
++#define DEBUGP(format, args...)
++#endif
++
++#define SECS 1000000 /* unit for wait_not_busy() is 1us */
++
++unsigned cf_head = 0;
++unsigned cf_cyl = 0;
++unsigned cf_spt = 0;
++unsigned cf_sectors = 0;
++static unsigned cf_block_size = 1;
++static void *baddr = 0;
++
++#define DBUF32 ((volatile u32 *)((unsigned long)dev->baddr | ATA_DBUF_OFFSET))
++
++
++static void cf_do_tasklet(unsigned long dev_l);
++
++
++static inline void wareg(u8 val, unsigned reg, struct cf_mips_dev* dev)
++{
++ writeb(val, dev->baddr + ATA_REG_OFFSET + reg);
++}
++
++static inline u8 rareg(unsigned reg, struct cf_mips_dev* dev)
++{
++ return readb(dev->baddr + ATA_REG_OFFSET + reg);
++}
++
++static inline int get_gpio_bit(gpio_func ofs, struct cf_mips_dev *dev)
++{
++ return (gpio_get(ofs) >> dev->pin) & 1;
++}
++
++static inline void set_gpio_bit(int bit, gpio_func ofs, struct cf_mips_dev *dev)
++{
++ gpio_set(ofs, (1 << dev->pin), ((bit & 1) << dev->pin));
++}
++
++static inline int cfrdy(struct cf_mips_dev *dev)
++{
++ return get_gpio_bit(DATA, dev);
++}
++
++static inline void prepare_cf_irq(struct cf_mips_dev *dev)
++{
++ set_gpio_bit(1, ILEVEL, dev); /* interrupt on cf ready (not busy) */
++ set_gpio_bit(0, ISTAT, dev); /* clear interrupt status */
++}
++
++static inline int cf_present(struct cf_mips_dev* dev)
++{
++ /* TODO: read and configure CIS into memory mapped mode
++ * TODO: parse CISTPL_CONFIG on CF+ cards to get base address (0x200)
++ * TODO: maybe adjust power saving setting for Hitachi Microdrive
++ */
++ int i;
++
++ /* setup CFRDY GPIO as input */
++ set_gpio_bit(0, FUNC, dev);
++ set_gpio_bit(0, CFG, dev);
++
++ for (i = 0; i < 0x10; ++i) {
++ if (rareg(i,dev) != 0xff)
++ return 1;
++ }
++ return 0;
++}
++
++static inline int is_busy(struct cf_mips_dev *dev)
++{
++ return !cfrdy(dev);
++}
++
++static int wait_not_busy(int to_us, int wait_for_busy,struct cf_mips_dev *dev)
++{
++ int us_passed = 0;
++ if (wait_for_busy && !is_busy(dev)) {
++ /* busy must appear within 400ns,
++ * but it may dissapear before we see it
++ * => must not wait for busy in a loop
++ */
++ ndelay(400);
++ }
++
++ do {
++ if (us_passed)
++ udelay(1); /* never reached in async mode */
++ if (!is_busy(dev)) {
++ if (us_passed > 1 * SECS) {
++ printk(KERN_WARNING "cf-mips: not busy ok (after %dus)"
++ ", status 0x%02x\n", us_passed, (unsigned) rareg(ATA_REG_ST,dev));
++ }
++ return CF_TRANS_OK;
++ }
++ if (us_passed == 1 * SECS) {
++ printk(KERN_WARNING "cf-mips: wait not busy %dus..\n", to_us);
++ }
++ if (dev->async_mode) {
++ dev->to_timer.expires = jiffies + (to_us * HZ / SECS);
++ dev->irq_enable_time = jiffies;
++ prepare_cf_irq(dev);
++ if (is_busy(dev)) {
++ add_timer(&dev->to_timer);
++ enable_irq(dev->irq);
++ return CF_TRANS_IN_PROGRESS;
++ }
++ continue;
++ }
++ ++us_passed;
++ } while (us_passed < to_us);
++
++ printk(KERN_ERR "cf-mips: wait not busy timeout (%dus)"
++ ", status 0x%02x, state %d\n",
++ to_us, (unsigned) rareg(ATA_REG_ST,dev), dev->tstate);
++ return CF_TRANS_FAILED;
++}
++
++static irqreturn_t cf_irq_handler(int irq, void *dev_id)
++{
++ /* While tasklet has not disabled irq, irq will be retried all the time
++ * because of ILEVEL matching GPIO pin status => deadlock.
++ * To avoid this, we change ILEVEL to 0.
++ */
++ struct cf_mips_dev *dev=dev_id;
++
++ set_gpio_bit(0, ILEVEL, dev);
++ set_gpio_bit(0, ISTAT, dev);
++
++ del_timer(&dev->to_timer);
++ tasklet_schedule(&dev->tasklet);
++ return IRQ_HANDLED;
++}
++
++static int do_reset(struct cf_mips_dev *dev)
++{
++ printk(KERN_INFO "cf-mips: resetting..\n");
++
++ wareg(ATA_REG_DC_SRST, ATA_REG_DC,dev);
++ udelay(1); /* FIXME: how long should we wait here? */
++ wareg(0, ATA_REG_DC,dev);
++
++ return wait_not_busy(30 * SECS, 1,dev);
++}
++
++static int set_multiple(struct cf_mips_dev *dev)
++{
++ if (dev->block_size <= 1)
++ return CF_TRANS_OK;
++
++ wareg(dev->block_size, ATA_REG_SC,dev);
++ wareg(ATA_REG_DH_BASE | ATA_REG_DH_LBA, ATA_REG_DH,dev);
++ wareg(ATA_CMD_SET_MULTIPLE, ATA_REG_CMD,dev);
++
++ return wait_not_busy(10 * SECS, 1,dev);
++}
++
++static int set_cmd(struct cf_mips_dev *dev)
++{
++ //DEBUGP(KERN_INFO "cf-mips: ata cmd 0x%02x\n", dev->tcmd);
++ // sector_count should be <=24 bits..
++ BUG_ON(dev->tsect_start>=0x10000000);
++ // This way, it addresses 2^24 * 512 = 128G
++
++ if (dev->tsector_count) {
++ wareg(dev->tsector_count & 0xff, ATA_REG_SC,dev);
++ wareg(dev->tsect_start & 0xff, ATA_REG_SN,dev);
++ wareg((dev->tsect_start >> 8) & 0xff, ATA_REG_CL,dev);
++ wareg((dev->tsect_start >> 16) & 0xff, ATA_REG_CH,dev);
++ }
++ wareg(((dev->tsect_start >> 24) & 0x0f) | ATA_REG_DH_BASE | ATA_REG_DH_LBA,
++ ATA_REG_DH,dev); /* select drive on all commands */
++ wareg(dev->tcmd, ATA_REG_CMD,dev);
++ return wait_not_busy(10 * SECS, 1,dev);
++}
++
++static int do_trans(struct cf_mips_dev *dev)
++{
++ int res;
++ unsigned st;
++ int transfered;
++
++ //printk("do_trans: %d sectors left\n",dev->tsectors_left);
++ while (dev->tsectors_left) {
++ transfered = 0;
++
++ st = rareg(ATA_REG_ST,dev);
++ if (!(st & ATA_REG_ST_DRQ)) {
++ printk(KERN_ERR "cf-mips: do_trans without DRQ (status 0x%x)!\n", st);
++ if (st & ATA_REG_ST_ERR) {
++ int errId = rareg(ATA_REG_ERR,dev);
++ printk(KERN_ERR "cf-mips: %s error, status 0x%x, errid 0x%x\n",
++ (dev->tread ? "read" : "write"), st, errId);
++ }
++ return CF_TRANS_FAILED;
++ }
++ do { /* Fill/read the buffer one block */
++ u32 *qbuf, *qend;
++ qbuf = (u32 *)dev->tbuf;
++ qend = qbuf + CF_SECT_SIZE / sizeof(u32);
++ if (dev->tread) {
++ while (qbuf!=qend)
++ put_unaligned(*DBUF32,qbuf++);
++ //*(qbuf++) = *DBUF32;
++ }
++ else {
++ while(qbuf!=qend)
++ *DBUF32 = get_unaligned(qbuf++);
++ }
++
++ dev->tsectors_left--;
++ dev->tbuf += CF_SECT_SIZE;
++ dev->tbuf_size -= CF_SECT_SIZE;
++ transfered++;
++ } while (transfered != dev->block_size && dev->tsectors_left > 0);
++
++ res = wait_not_busy(10 * SECS, 1,dev);
++ if (res != CF_TRANS_OK)
++ return res;
++ };
++
++ st = rareg(ATA_REG_ST,dev);
++ if (st & (ATA_REG_ST_DRQ | ATA_REG_ST_DWF | ATA_REG_ST_ERR)) {
++ if (st & ATA_REG_ST_DRQ) {
++ printk(KERN_ERR "cf-mips: DRQ after all %d sectors are %s"
++ ", status 0x%x\n", dev->tsector_count, (dev->tread ? "read" : "written"), st);
++ } else if (st & ATA_REG_ST_DWF) {
++ printk(KERN_ERR "cf-mips: write fault, status 0x%x\n", st);
++ } else {
++ int errId = rareg(ATA_REG_ERR,dev);
++ printk(KERN_ERR "cf-mips: %s error, status 0x%x, errid 0x%x\n",
++ (dev->tread ? "read" : "write"), st, errId);
++ }
++ return CF_TRANS_FAILED;
++ }
++ return CF_TRANS_OK;
++}
++
++static int cf_do_state(struct cf_mips_dev *dev)
++{
++ int res;
++ switch (dev->tstate) { /* fall through everywhere */
++ case TS_IDLE:
++ dev->tstate = TS_READY;
++ if (is_busy(dev)) {
++ dev->tstate = TS_AFTER_RESET;
++ res = do_reset(dev);
++ if (res != CF_TRANS_OK)
++ break;
++ }
++ case TS_AFTER_RESET:
++ if (dev->tstate == TS_AFTER_RESET) {
++ dev->tstate = TS_READY;
++ res = set_multiple(dev);
++ if (res != CF_TRANS_OK)
++ break;
++ }
++ case TS_READY:
++ dev->tstate = TS_CMD;
++ res = set_cmd(dev);
++ if (res != CF_TRANS_OK)
++ break;;
++ case TS_CMD:
++ dev->tstate = TS_TRANS;
++ case TS_TRANS:
++ res = do_trans(dev);
++ break;
++ default:
++ printk(KERN_ERR "cf-mips: BUG: unknown tstate %d\n", dev->tstate);
++ return CF_TRANS_FAILED;
++ }
++ if (res != CF_TRANS_IN_PROGRESS)
++ dev->tstate = TS_IDLE;
++ return res;
++}
++
++static void cf_do_tasklet(unsigned long dev_l)
++{
++ struct cf_mips_dev* dev=(struct cf_mips_dev*) dev_l;
++ int res;
++
++ disable_irq(dev->irq);
++
++ if (dev->tstate == TS_IDLE)
++ return; /* can happen when irq is first registered */
++
++#if 0
++ DEBUGP(KERN_WARNING "cf-mips: not busy ok (tasklet) status 0x%02x\n",
++ (unsigned) rareg(ATA_REG_ST,dev));
++#endif
++
++ res = cf_do_state(dev);
++ if (res == CF_TRANS_IN_PROGRESS)
++ return;
++ cf_async_trans_done(dev,res);
++}
++
++static void cf_async_timeout(unsigned long dev_l)
++{
++ struct cf_mips_dev* dev=(struct cf_mips_dev*) dev_l;
++ disable_irq(dev->irq);
++ /* Perhaps send abort to the device? */
++ printk(KERN_ERR "cf-mips: wait not busy timeout (%lus)"
++ ", status 0x%02x, state %d\n",
++ jiffies - dev->irq_enable_time, (unsigned) rareg(ATA_REG_ST,dev), dev->tstate);
++ dev->tstate = TS_IDLE;
++ cf_async_trans_done(dev,CF_TRANS_FAILED);
++}
++
++int cf_do_transfer(struct cf_mips_dev* dev,sector_t sector, unsigned long nsect,
++ char* buffer, int is_write)
++{
++ BUG_ON(dev->tstate!=TS_IDLE);
++ if (nsect > ATA_MAX_SECT_PER_CMD) {
++ printk(KERN_WARNING "cf-mips: sector count %lu out of range\n",nsect);
++ return CF_TRANS_FAILED;
++ }
++ if (sector + nsect > dev->sectors) {
++ printk(KERN_WARNING "cf-mips: sector %lu out of range\n",sector);
++ return CF_TRANS_FAILED;
++ }
++ dev->tbuf = buffer;
++ dev->tbuf_size = nsect*512;
++ dev->tsect_start = sector;
++ dev->tsector_count = nsect;
++ dev->tsectors_left = dev->tsector_count;
++ dev->tread = (is_write)?0:1;
++
++ dev->tcmd = (dev->block_size == 1 ?
++ (is_write ? ATA_CMD_WRITE_SECTORS : ATA_CMD_READ_SECTORS) :
++ (is_write ? ATA_CMD_WRITE_MULTIPLE : ATA_CMD_READ_MULTIPLE));
++
++ return cf_do_state(dev);
++}
++
++static int do_identify(struct cf_mips_dev *dev)
++{
++ u16 sbuf[CF_SECT_SIZE >> 1];
++ int res;
++ char tstr[17]; //serial
++ BUG_ON(dev->tstate!=TS_IDLE);
++ dev->tbuf = (char *) sbuf;
++ dev->tbuf_size = CF_SECT_SIZE;
++ dev->tsect_start = 0;
++ dev->tsector_count = 0;
++ dev->tsectors_left = 1;
++ dev->tread = 1;
++ dev->tcmd = ATA_CMD_IDENTIFY_DRIVE;
++
++ DEBUGP(KERN_INFO "cf-mips: identify drive..\n");
++ res = cf_do_state(dev);
++ if (res == CF_TRANS_IN_PROGRESS) {
++ printk(KERN_ERR "cf-mips: BUG: async identify cmd\n");
++ return CF_TRANS_FAILED;
++ }
++ if (res != CF_TRANS_OK)
++ return 0;
++
++ dev->head = sbuf[3];
++ dev->cyl = sbuf[1];
++ dev->spt = sbuf[6];
++ dev->sectors = ((unsigned long) sbuf[7] << 16) | sbuf[8];
++ dev->dtype=sbuf[0];
++ memcpy(tstr,&sbuf[12],16);
++ tstr[16]=0;
++ printk(KERN_INFO "cf-mips: %s detected, C/H/S=%d/%d/%d sectors=%u (%uMB) Serial=%s\n",
++ (sbuf[0] == 0x848A ? "CF card" : "ATA drive"), dev->cyl, dev->head,
++ dev->spt, dev->sectors, dev->sectors >> 11,tstr);
++ return 1;
++}
++
++static void init_multiple(struct cf_mips_dev * dev)
++{
++ int res;
++ DEBUGP(KERN_INFO "cf-mips: detecting block size\n");
++
++ dev->block_size = 128; /* max block size = 128 sectors (64KB) */
++ do {
++ wareg(dev->block_size, ATA_REG_SC,dev);
++ wareg(ATA_REG_DH_BASE | ATA_REG_DH_LBA, ATA_REG_DH,dev);
++ wareg(ATA_CMD_SET_MULTIPLE, ATA_REG_CMD,dev);
++
++ res = wait_not_busy(10 * SECS, 1,dev);
++ if (res != CF_TRANS_OK) {
++ printk(KERN_ERR "cf-mips: failed to detect block size: busy!\n");
++ dev->block_size = 1;
++ return;
++ }
++ if ((rareg(ATA_REG_ST,dev) & ATA_REG_ST_ERR) == 0)
++ break;
++ dev->block_size /= 2;
++ } while (dev->block_size > 1);
++
++ printk(KERN_INFO "cf-mips: multiple sectors = %d\n", dev->block_size);
++}
++
++int cf_init(struct cf_mips_dev *dev)
++{
++ tasklet_init(&dev->tasklet,cf_do_tasklet,(unsigned long)dev);
++ dev->baddr = ioremap_nocache((unsigned long)dev->base, CFDEV_BUF_SIZE);
++ if (!dev->baddr) {
++ printk(KERN_ERR "cf-mips: cf_init: ioremap for (%lx,%x) failed\n",
++ (unsigned long) dev->base, CFDEV_BUF_SIZE);
++ return -EBUSY;
++ }
++
++ if (!cf_present(dev)) {
++ printk(KERN_WARNING "cf-mips: cf card not present\n");
++ iounmap(dev->baddr);
++ return -ENODEV;
++ }
++
++ if (do_reset(dev) != CF_TRANS_OK) {
++ printk(KERN_ERR "cf-mips: cf reset failed\n");
++ iounmap(dev->baddr);
++ return -EBUSY;
++ }
++
++ if (!do_identify(dev)) {
++ printk(KERN_ERR "cf-mips: cf identify failed\n");
++ iounmap(dev->baddr);
++ return -EBUSY;
++ }
++
++/* set_apm_level(ATA_APM_WITH_STANDBY); */
++ init_multiple(dev);
++
++ init_timer(&dev->to_timer);
++ dev->to_timer.function = cf_async_timeout;
++ dev->to_timer.data = (unsigned long)dev;
++
++ prepare_cf_irq(dev);
++ if (request_irq(dev->irq, cf_irq_handler, 0, "CF Mips", dev)) {
++ printk(KERN_ERR "cf-mips: failed to get irq\n");
++ iounmap(dev->baddr);
++ return -EBUSY;
++ }
++ /* Disable below would be odd, because request will enable, and the tasklet
++ will disable it itself */
++ //disable_irq(dev->irq);
++
++ dev->async_mode = 1;
++
++ return 0;
++}
++
++void cf_cleanup(struct cf_mips_dev *dev)
++{
++ iounmap(dev->baddr);
++ free_irq(dev->irq, NULL);
++#if REQUEST_MEM_REGION
++ release_mem_region((unsigned long)dev->base, CFDEV_BUF_SIZE);
++#endif
++}
++
++
++/*eof*/
+diff -urN linux.old/drivers/block/rb500/ata.h linux.dev/drivers/block/rb500/ata.h
+--- linux.old/drivers/block/rb500/ata.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/block/rb500/ata.h 2006-10-26 00:11:14.000000000 +0200
+@@ -0,0 +1,143 @@
++/* CF-mips driver
++ This is a block driver for the direct (mmaped) interface to the CF-slot,
++ found in Routerboard.com's RB532 board
++ See SDK provided from routerboard.com.
++
++ Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6.
++ Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org>
++
++ This work is redistributed under the terms of the GNU General Public License.
++*/
++
++#ifndef __CFMIPS_ATA_H__
++#define __CFMIPS_ATA_H__
++
++#include <linux/interrupt.h>
++
++#define CFG_DC_DEV1 (void*)0xb8010010
++#define CFG_DC_DEVBASE 0x0
++#define CFG_DC_DEVMASK 0x4
++#define CFG_DC_DEVC 0x8
++#define CFG_DC_DEVTC 0xC
++
++#define CFDEV_BUF_SIZE 0x1000
++#define ATA_CIS_OFFSET 0x200
++#define ATA_REG_OFFSET 0x800
++#define ATA_DBUF_OFFSET 0xC00
++
++#define ATA_REG_FEAT 0x1
++#define ATA_REG_SC 0x2
++#define ATA_REG_SN 0x3
++#define ATA_REG_CL 0x4
++#define ATA_REG_CH 0x5
++#define ATA_REG_DH 0x6
++#define ATA_REG_DH_BASE 0xa0
++#define ATA_REG_DH_LBA 0x40
++#define ATA_REG_DH_DRV 0x10
++#define ATA_REG_CMD 0x7
++#define ATA_REG_ST 0x7
++#define ATA_REG_ST_BUSY 0x80
++#define ATA_REG_ST_RDY 0x40
++#define ATA_REG_ST_DWF 0x20
++#define ATA_REG_ST_DSC 0x10
++#define ATA_REG_ST_DRQ 0x08
++#define ATA_REG_ST_CORR 0x04
++#define ATA_REG_ST_ERR 0x01
++#define ATA_REG_ERR 0xd
++#define ATA_REG_DC 0xe
++#define ATA_REG_DC_IEN 0x02
++#define ATA_REG_DC_SRST 0x04
++
++#define ATA_CMD_READ_SECTORS 0x20
++#define ATA_CMD_WRITE_SECTORS 0x30
++#define ATA_CMD_EXEC_DRIVE_DIAG 0x90
++#define ATA_CMD_READ_MULTIPLE 0xC4
++#define ATA_CMD_WRITE_MULTIPLE 0xC5
++#define ATA_CMD_SET_MULTIPLE 0xC6
++#define ATA_CMD_IDENTIFY_DRIVE 0xEC
++#define ATA_CMD_SET_FEATURES 0xEF
++
++#define ATA_FEATURE_ENABLE_APM 0x05
++#define ATA_FEATURE_DISABLE_APM 0x85
++#define ATA_APM_DISABLED 0x00
++#define ATA_APM_MIN_POWER 0x01
++#define ATA_APM_WITH_STANDBY 0x7f
++#define ATA_APM_WITHOUT_STANDBY 0x80
++#define ATA_APM_MAX_PERFORMANCE 0xfe
++
++#define CF_SECT_SIZE 0x200
++/* That is the ratio CF_SECT_SIZE/512 (the kernel sector size) */
++#define CF_KERNEL_MUL 1
++#define ATA_MAX_SECT_PER_CMD 0x100
++
++#define CF_TRANS_FAILED 0
++#define CF_TRANS_OK 1
++#define CF_TRANS_IN_PROGRESS 2
++
++
++enum trans_state {
++ TS_IDLE = 0,
++ TS_AFTER_RESET,
++ TS_READY,
++ TS_CMD,
++ TS_TRANS
++};
++
++//
++// #if DEBUG
++// static unsigned long busy_time;
++// #endif
++
++/** Struct to hold the cfdev
++Actually, all the data here only has one instance. However, for
++reasons of programming conformity, it is passed around as a pointer
++*/
++struct cf_mips_dev {
++ void *base; /* base address for I/O */
++ void *baddr; /* remapped address */
++
++ int pin; /* gpio pin */
++ int irq; /* gpio irq */
++
++ unsigned head;
++ unsigned cyl;
++ unsigned spt;
++ unsigned sectors;
++
++ unsigned short block_size;
++ unsigned dtype ; // ATA or CF
++ struct request_queue *queue;
++ struct gendisk *gd;
++
++ /* Transaction state */
++ enum trans_state tstate;
++ char *tbuf;
++ unsigned long tbuf_size;
++ sector_t tsect_start;
++ unsigned tsector_count;
++ unsigned tsectors_left;
++ int tread;
++ unsigned tcmd;
++ int async_mode;
++ unsigned long irq_enable_time;
++
++ struct request *active_req; /* A request is being carried out. Is that different from tstate? */
++ int users;
++ struct timer_list to_timer;
++ struct tasklet_struct tasklet;
++
++ /** This lock ensures that the requests to this device are all done
++ atomically. Transfers can run in parallel, requests are all queued
++ one-by-one */
++ spinlock_t lock;
++};
++
++int cf_do_transfer(struct cf_mips_dev* dev,sector_t sector, unsigned long nsect,
++ char* buffer, int is_write);
++int cf_init(struct cf_mips_dev* dev);
++void cf_cleanup(struct cf_mips_dev* dev);
++
++void cf_async_trans_done(struct cf_mips_dev* dev, int result);
++// void *cf_get_next_buf(unsigned long *buf_size);
++
++#endif
+diff -urN linux.old/drivers/block/rb500/bdev.c linux.dev/drivers/block/rb500/bdev.c
+--- linux.old/drivers/block/rb500/bdev.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/block/rb500/bdev.c 2006-10-26 00:11:14.000000000 +0200
+@@ -0,0 +1,339 @@
++/* CF-mips driver
++ This is a block driver for the direct (mmaped) interface to the CF-slot,
++ found in Routerboard.com's RB532 board
++ See SDK provided from routerboard.com.
++
++ Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6.
++ Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org>
++
++ This work is redistributed under the terms of the GNU General Public License.
++*/
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/time.h>
++#include <linux/wait.h>
++#include <linux/fs.h>
++#include <linux/genhd.h>
++#include <linux/blkdev.h>
++#include <linux/blkpg.h>
++#include <linux/hdreg.h>
++#include <linux/platform_device.h>
++
++#include <asm/uaccess.h>
++#include <asm/io.h>
++
++#include <asm/rc32434/rb.h>
++
++#ifdef DEBUG
++#define DEBUGP printk
++#define DLEVEL 1
++#else
++#define DEBUGP(format, args...)
++#define DLEVEL 0
++#endif
++
++#define CF_MIPS_MAJOR 13
++#define MAJOR_NR CF_MIPS_MAJOR
++#define CF_MAX_PART 16 /* max 15 partitions */
++
++#include "ata.h"
++
++//extern struct block_device_operations cf_bdops;
++
++// static struct hd_struct cf_parts[CF_MAX_PART];
++// static int cf_part_sizes[CF_MAX_PART];
++// static int cf_hsect_sizes[CF_MAX_PART];
++// static int cf_max_sectors[CF_MAX_PART];
++// static int cf_blksize_sizes[CF_MAX_PART];
++
++// static spinlock_t lock = SPIN_LOCK_UNLOCKED;
++
++// volatile int cf_busy = 0;
++
++static struct request *active_req = NULL;
++
++static int cf_open (struct inode *, struct file *);
++static int cf_release (struct inode *, struct file *);
++static int cf_ioctl (struct inode *, struct file *, unsigned, unsigned long);
++
++static void cf_request(request_queue_t * q);
++static int cf_transfer(const struct request *req);
++
++/*long (*unlocked_ioctl) (struct file *, unsigned, unsigned long);
++long (*compat_ioctl) (struct file *, unsigned, unsigned long);*/
++// int (*direct_access) (struct block_device *, sector_t, unsigned long *);
++// int (*media_changed) (struct gendisk *);
++// int (*revalidate_disk) (struct gendisk *);
++
++static struct block_device_operations cf_bdops = {
++ .owner = THIS_MODULE,
++ .open = cf_open,
++ .release = cf_release,
++ .ioctl = cf_ioctl,
++ .media_changed = NULL,
++ .unlocked_ioctl = NULL,
++ .revalidate_disk = NULL,
++ .compat_ioctl = NULL,
++ .direct_access = NULL
++};
++
++
++int cf_mips_probe(struct platform_device *pdev)
++{
++ struct gendisk* cf_gendisk=NULL;
++ struct cf_device *cdev = (struct cf_device *) pdev->dev.platform_data;
++ struct cf_mips_dev *dev;
++ struct resource *r;
++ int reg_result;
++
++ reg_result = register_blkdev(MAJOR_NR, "cf-mips");
++ if (reg_result < 0) {
++ printk(KERN_WARNING "cf-mips: can't get major %d\n", MAJOR_NR);
++ return reg_result;
++ }
++
++ dev = (struct cf_mips_dev *)kmalloc(sizeof(struct cf_mips_dev),GFP_KERNEL);
++ if (!dev)
++ goto out_err;
++ memset(dev, 0, sizeof(struct cf_mips_dev));
++ cdev->dev = dev;
++
++ dev->pin = cdev->gpio_pin;
++ dev->irq = platform_get_irq_byname(pdev, "cf_irq");
++ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cf_membase");
++ dev->base = (void *) r->start;
++
++ if (cf_init(dev)) goto out_err;
++ printk("init done");
++
++ spin_lock_init(&dev->lock);
++ dev->queue = blk_init_queue(cf_request,&dev->lock);
++ if (!dev->queue){
++ printk(KERN_ERR "cf-mips: no mem for queue\n");
++ goto out_err;
++ }
++ blk_queue_max_sectors(dev->queue,ATA_MAX_SECT_PER_CMD);
++
++ /* For memory devices, it is always better to avoid crossing segments
++ inside the same request. */
++/* if (dev->dtype==0x848A){
++ printk(KERN_INFO "Setting boundary for cf to 0x%x",(dev->block_size*512)-1);
++ blk_queue_segment_boundary(dev->queue, (dev->block_size*512)-1);
++ }*/
++
++ dev->gd = alloc_disk(CF_MAX_PART);
++ cf_gendisk = dev->gd;
++ cdev->gd = dev->gd;
++ if (!cf_gendisk) goto out_err; /* Last of these goto's */
++
++ cf_gendisk->major = MAJOR_NR;
++ cf_gendisk->first_minor = 0;
++ cf_gendisk->queue=dev->queue;
++ BUG_ON(cf_gendisk->minors != CF_MAX_PART);
++ strcpy(cf_gendisk->disk_name,"cfa");
++ cf_gendisk->fops = &cf_bdops;
++ cf_gendisk->flags = 0 ; /* is not yet GENHD_FL_REMOVABLE */
++ cf_gendisk->private_data=dev;
++
++ set_capacity(cf_gendisk,dev->sectors * CF_KERNEL_MUL);
++
++ /* Let the disk go live */
++ add_disk(cf_gendisk);
++#if 0
++ result = cf_init();
++
++ /* default cfg for all partitions */
++ memset(cf_parts, 0, sizeof (cf_parts[0]) * CF_MAX_PART);
++ memset(cf_part_sizes, 0, sizeof (cf_part_sizes[0]) * CF_MAX_PART);
++ for (i = 0; i < CF_MAX_PART; ++i) {
++ cf_hsect_sizes[i] = CF_SECT_SIZE;
++ cf_max_sectors[i] = ATA_MAX_SECT_PER_CMD;
++ cf_blksize_sizes[i] = BLOCK_SIZE;
++ }
++
++ /* setup info for whole disk (partition 0) */
++ cf_part_sizes[0] = cf_sectors / 2;
++ cf_parts[0].nr_sects = cf_sectors;
++
++ blk_size[MAJOR_NR] = cf_part_sizes;
++ blksize_size[MAJOR_NR] = cf_blksize_sizes;
++ max_sectors[MAJOR_NR] = cf_max_sectors;
++ hardsect_size[MAJOR_NR] = cf_hsect_sizes;
++ read_ahead[MAJOR_NR] = 8; /* (4kB) */
++
++ blk_init_queue(BLK_DEFAULT_QUEUE(MAJOR_NR), DEVICE_REQUEST);
++
++ add_gendisk(&cf_gendisk);
++#endif
++// printk(KERN_INFO "cf-mips partition check: \n");
++// register_disk(cf_gendisk, MKDEV(MAJOR_NR, 0), CF_MAX_PART,
++// &cf_bdops, dev->sectors);
++ return 0;
++
++out_err:
++ if (dev->queue){
++ blk_cleanup_queue(dev->queue);
++ }
++ if (reg_result) {
++ unregister_blkdev(MAJOR_NR, "cf-mips");
++ return reg_result;
++ }
++ if (dev){
++ cf_cleanup(dev);
++ kfree(dev);
++ }
++ return 1;
++}
++
++static int
++cf_mips_remove(struct platform_device *pdev)
++{
++ struct cf_device *cdev = (struct cf_device *) pdev->dev.platform_data;
++ struct cf_mips_dev *dev = (struct cf_mips_dev *) cdev->dev;
++
++ unregister_blkdev(MAJOR_NR, "cf-mips");
++ blk_cleanup_queue(dev->queue);
++
++ del_gendisk(dev->gd);
++ cf_cleanup(dev);
++ return 0;
++}
++
++
++static struct platform_driver cf_driver = {
++ .driver.name = "rb500-cf",
++ .probe = cf_mips_probe,
++ .remove = cf_mips_remove,
++};
++
++static int __init cf_mips_init(void)
++{
++ printk(KERN_INFO "cf-mips module loaded\n");
++ return platform_driver_register(&cf_driver);
++}
++
++static void cf_mips_cleanup(void)
++{
++ platform_driver_unregister(&cf_driver);
++ printk(KERN_INFO "cf-mips module removed\n");
++}
++
++module_init(cf_mips_init);
++module_exit(cf_mips_cleanup);
++
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_BLOCKDEV_MAJOR(CF_MIPS_MAJOR);
++
++
++static int cf_open(struct inode *inode, struct file *filp)
++{
++ struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data;
++ int minor = MINOR(inode->i_rdev);
++
++ if (minor >= CF_MAX_PART)
++ return -ENODEV;
++ //DEBUGP(KERN_INFO "cf-mips module opened, minor %d\n", minor);
++ spin_lock(&dev->lock);
++ dev->users++;
++ spin_unlock(&dev->lock);
++ filp->private_data=dev;
++
++ /* dirty workaround to set CFRDY GPIO as an input when some other
++ program sets it as an output */
++ gpio_set(CFG, (1 << dev->pin), 0);
++ return 0; /* success */
++}
++
++static int cf_release(struct inode *inode, struct file *filp)
++{
++ int minor = MINOR(inode->i_rdev);
++ struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data;
++ spin_lock(&dev->lock);
++ dev->users--;
++ spin_unlock(&dev->lock);
++ return 0;
++}
++
++static int cf_ioctl(struct inode *inode, struct file *filp,
++ unsigned int cmd, unsigned long arg)
++{
++ unsigned minor = MINOR(inode->i_rdev);
++ struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data;
++
++ DEBUGP(KERN_INFO "cf_ioctl cmd %u\n", cmd);
++ switch (cmd) {
++ case BLKRRPART: /* re-read partition table */
++ if (!capable(CAP_SYS_ADMIN))
++ return -EACCES;
++ printk(KERN_INFO "cf-mips partition check: \n");
++ register_disk(dev->gd);
++ return 0;
++
++ case HDIO_GETGEO:
++ {
++ struct hd_geometry geo;
++ geo.cylinders = dev->cyl;
++ geo.heads = dev->head;
++ geo.sectors = dev->spt;
++ geo.start = (*dev->gd->part)[minor].start_sect;
++ if (copy_to_user((void *) arg, &geo, sizeof (geo)))
++ return -EFAULT;
++ }
++ return 0;
++ }
++
++ return -EINVAL; /* unknown command */
++}
++
++static void cf_request(request_queue_t * q)
++{
++ struct cf_mips_dev* dev;
++
++ struct request * req;
++ int status;
++
++ /* We could have q->queuedata = dev , but haven't yet. */
++ if (active_req)
++ return;
++
++ while ((req=elv_next_request(q))!=NULL){
++ dev=req->rq_disk->private_data;
++ status=cf_transfer(req);
++ if (status==CF_TRANS_IN_PROGRESS){
++ active_req=req;
++ return;
++ }
++ end_request(req,status);
++ }
++}
++
++static int cf_transfer(const struct request *req)
++{
++ struct cf_mips_dev* dev=req->rq_disk->private_data;
++
++ if (!blk_fs_request(req)){
++ if (printk_ratelimit())
++ printk(KERN_WARNING "cf-mips: skipping non-fs request 0x%x\n",req->cmd[0]);
++ return CF_TRANS_FAILED;
++ }
++
++ return cf_do_transfer(dev,req->sector,req->current_nr_sectors,req->buffer,rq_data_dir(req));
++}
++
++void cf_async_trans_done(struct cf_mips_dev * dev,int result)
++{
++ struct request *req;
++
++ spin_lock(&dev->lock);
++ req=active_req;
++ active_req=NULL;
++ end_request(req,result);
++ spin_unlock(&dev->lock);
++
++ spin_lock(&dev->lock);
++ cf_request(dev->queue);
++ spin_unlock(&dev->lock);
++}
++
+diff -urN linux.old/drivers/block/rb500/Makefile linux.dev/drivers/block/rb500/Makefile
+--- linux.old/drivers/block/rb500/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/block/rb500/Makefile 2006-10-26 00:11:14.000000000 +0200
+@@ -0,0 +1,3 @@
++## Makefile for the RB532 CF port
++
++obj-y += bdev.o ata.o
--- /dev/null
+diff -urN linux.old/drivers/mtd/nand/Kconfig linux.dev/drivers/mtd/nand/Kconfig
+--- linux.old/drivers/mtd/nand/Kconfig 2006-11-29 22:57:37.000000000 +0100
++++ linux.dev/drivers/mtd/nand/Kconfig 2006-12-14 04:38:51.000000000 +0100
+@@ -75,6 +75,12 @@
+ help
+ Support for NAND flash on Technologic Systems TS-7250 platform.
+
++config MTD_NAND_RB500
++ tristate "NAND Flash device on RB500 board"
++ depends on MTD_NAND
++ help
++ Support for NAND flash on RB500 platform.
++
+ config MTD_NAND_IDS
+ tristate
+
+diff -urN linux.old/drivers/mtd/nand/Makefile linux.dev/drivers/mtd/nand/Makefile
+--- linux.old/drivers/mtd/nand/Makefile 2006-11-29 22:57:37.000000000 +0100
++++ linux.dev/drivers/mtd/nand/Makefile 2006-12-14 04:38:51.000000000 +0100
+@@ -9,6 +9,7 @@
+ obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
+ obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
+ obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
++obj-$(CONFIG_MTD_NAND_RB500) += rbmipsnand.o
+ obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
+ obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
+ obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
--- /dev/null
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Atheros
+ NAME:=Atheros WiFi (default)
+ PACKAGES:=kmod-madwifi
+endef
+
+define Profile/Atheros/Description
+ Package set compatible with hardware using Atheros WiFi cards
+endef
+$(eval $(call Profile,Atheros))
+
--- /dev/null
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Texas
+ NAME:=Texas Instruments WiFi
+ PACKAGES:=kmod-acx
+endef
+
+define Profile/Texas/Description
+ Package set compatible with hardware using Texas Instruments WiFi cards
+endef
+$(eval $(call Profile,Texas))
+
--- /dev/null
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/None
+ NAME:=No WiFi
+ PACKAGES:=
+endef
+
+define Profile/None/Description
+ Package set without WiFi support
+endef
+$(eval $(call Profile,None))
+
projects / openwrt.git / commitdiff