brcm63xx: add support for BCM963269BHR board

Add kernel support for the BCM963269BHR board, USB and Ethernet switch,
LEDs and buttons are working.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39363 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/brcm63xx/patches-3.10/557-board_bcm963269bhr.patch b/target/linux/brcm63xx/patches-3.10/557-board_bcm963269bhr.patch
new file mode 100644 (file)
index 0000000..8fcd420
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.10/557-board_bcm963269bhr.patch
@@ -0,0 +1,88 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -4221,6 +4221,75 @@ static struct board_info __initdata boar
+ #endif
+ 
+ /*
++ * known 63268/63269 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_63268
++static struct board_info __initdata board_963269bhr = {
++      .name                           = "963269BHR",
++      .expected_cpu_id                = 0x63268,
++
++      .has_uart0                      = 1,
++
++      .has_pci                        = 1,
++
++      .has_ehci0                      = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "port1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "port4",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "963629BHR:green:usb1",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "963629BHR:green:usb2",
++                      .gpio           = 10,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 32,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++#endif
++
++/*
+  * all boards
+  */
+ static const struct board_info __initconst *bcm963xx_boards[] = {
+@@ -4303,6 +4372,9 @@ static const struct board_info __initcon
+       &board_96368mvwg,
+       &board_96368mvngr,
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_63268
++      &board_963269bhr,
++#endif
+ };
+ 
+ /*

diff --git a/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
index bfe7f9b..5d3bc21 100644 (file)
--- a/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
+++ b/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
@@ -8,7 +8,7 @@
  #include <linux/spi/spi.h>
  #include <linux/spi/spi_gpio.h>
  #include <linux/spi/74x164.h>
-@@ -4310,7 +4311,7 @@ static const struct board_info __initcon
+@@ -4382,7 +4383,7 @@ static const struct board_info __initcon
   * bcm4318 WLAN work
   */
  #ifdef CONFIG_SSB_PCIHOST
@@ -17,7 +17,7 @@
        .revision               = 0x02,
        .board_rev              = 0x17,
        .country_code           = 0x0,
-@@ -4330,6 +4331,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -4402,6 +4403,7 @@ static struct ssb_sprom bcm63xx_sprom =
        .boardflags_lo          = 0x2848,
        .boardflags_hi          = 0x0000,
  };