}
boot_hook_add preinit_main init_hotplug_failsafe
}
boot_hook_add preinit_main init_hotplug_failsafe
init_iface() {
check_module tg3
insmod switch-core
init_iface() {
check_module tg3
insmod switch-core
- check_module switch-robo || check_module switch-adm || {
+ check_module switch-robo || check_module switch-adm || {
check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
} || rmmod switch-core
}
check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
} || rmmod switch-core
}
}
boot_hook_add preinit_main enable_reset_button
}
boot_hook_add preinit_main enable_reset_button
ifconfig eth0 0.0.0.0 down
echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
}
ifconfig eth0 0.0.0.0 down
echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
}
[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
- ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
+ ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
}
}
boot_hook_add failsafe failsafe_ip
}
}
boot_hook_add failsafe failsafe_ip
do_mount_procfs() {
mount none /proc -t proc
}
do_mount_procfs() {
mount none /proc -t proc
}
port_net_echo() {
[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
port_net_echo() {
[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
- if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then
+ if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then
netmsg $pi_broadcast "$1"
fi
}
netmsg $pi_broadcast "$1"
fi
}
preinit_net_echo() {
preinit_ip
preinit_net_echo() {
preinit_ip
[ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && {
echo 1 > /proc/switch/eth0/reset
[ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && {
echo 1 > /proc/switch/eth0/reset
echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
port_net_echo $1
}; done
echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
port_net_echo $1
}; done
echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
preinit_net_echo "Entering Failsafe!\n"
indicate_failsafe_led
}
preinit_net_echo "Entering Failsafe!\n"
indicate_failsafe_led
}