ar71xx: Buffalo WZR-HP-AG300H LED support

An improved LED support for Buffalo WZR-HP-AG300H.

There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.

[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33294 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 6759cf0..420d690 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -150,6 +150,7 @@ get_status_led() {
        wlae-ag300n)
                status_led="buffalo:green:status"
                ;;
+       wzr-hp-ag300h | \
        wzr-hp-g300nh2)
                status_led="buffalo:red:diag"
                ;;

diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix
new file mode 100644 (file)
index 0000000..1024150
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix
@@ -0,0 +1,51 @@
+#!/bin/sh
+
+# For AR9220 and AR9223, GPIO JTAG must explicit be disabled
+# before LEDs start working. Do this when wifi device is
+# detected.
+
+#
+# $DEVPATH is not valid for some boards (including WZR-HP-AG300H).
+# Manipulate the $DEVPATH to reach the corresponding phyN.
+#
+
+devdir=`dirname $DEVPATH`
+devdir=`dirname $devdir`
+phydir=/sys$devdir/ieee80211
+phyname=`cat $phydir/phy*/name`
+
+if [ -z $phyname -o $ACTION != "add" ]; then exit 0; fi
+
+#
+# ar922x_disable_gpio_jtag():
+#
+# Emulate
+#       REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
+# for AR9220 and AR9223.
+#
+
+ar922x_disable_gpio_jtag()                 
+{                                          
+        local regidx=0x4054               
+        
+       [ -f /sys/kernel/debug/ieee80211/$1/ath9k/regidx ] && {
+               echo $regidx > /sys/kernel/debug/ieee80211/$1/ath9k/regidx
+               regval=`cat /sys/kernel/debug/ieee80211/$1/ath9k/regval`
+               regval=$((regval | 0x20000))
+               echo regval $regval
+               echo $regval > /sys/kernel/debug/ieee80211/$1/ath9k/regval
+        }
+}
+
+if [ $phyname -a $ACTION = "add" ]; then
+
+       . /lib/ar71xx.sh
+       
+       case $(ar71xx_board_name) in
+               wzr-hp-ag300h)
+                       ar922x_disable_gpio_jtag $phyname
+                       ;;
+       esac;
+fi
+
+exit 0

diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
index 5e2548e..0082ffe 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
@@ -165,6 +165,12 @@ wlae-ag300n)
        ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0"
        ;;
 
+wzr-hp-ag300h)
+       ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
+       ucidef_set_led_netdev "router" "ROUTER" "buffalo:green:router" "eth1"
+       ucidef_set_led_usbdev "usb" "USB" "buffalo:green:usb" "1-1"
+       ;;
+
 wzr-hp-g300nh)
        ucidef_set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt"
        ucidef_set_led_netdev "router" "Router" "buffalo:green:router" "eth1"

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c
index 5941d5c..868514c 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c
@@ -75,6 +75,47 @@ static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = {
        },
 };
 
+static struct gpio_led wzrhpag300h_wmac0_leds_gpio[] = {
+        {
+                .name           = "buffalo:amber:band2g",
+                .gpio           = 1,
+                .active_low     = 1,
+       },
+        {
+                .name           = "buffalo:green:usb",
+                .gpio           = 3,
+                .active_low     = 1,
+       },
+        {
+                .name           = "buffalo:green:band2g",
+                .gpio           = 5,
+                .active_low     = 1,
+       },
+};
+
+static struct gpio_led wzrhpag300h_wmac1_leds_gpio[] = {
+        {
+                .name           = "buffalo:green:band5g",
+                .gpio           = 1,
+                .active_low     = 1,
+       },
+        {
+                .name           = "buffalo:green:router",
+                .gpio           = 3,
+                .active_low     = 1,
+       },
+        {
+                .name           = "buffalo:blue:movie_engine",
+                .gpio           = 4,
+                .active_low     = 1,
+       },
+        {
+                .name           = "buffalo:amber:band5g",
+                .gpio           = 5,
+                .active_low     = 1,
+       },
+};
+
 static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = {
        {
                .desc           = "reset",
@@ -111,6 +152,13 @@ static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = {
                .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = 7,
                .active_low     = 1,
+       }, {
+               .desc           = "movie_engine",
+               .type           = EV_KEY,
+               .code           = BTN_7,
+               .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = 8,
+               .active_low     = 1,
        }
 };
 
@@ -150,6 +198,14 @@ static void __init wzrhpag300h_setup(void)
        ath79_register_m25p80_multi(&wzrhpag300h_flash_data);
 
        ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
+
+       ap9x_pci_setup_wmac_led_pin(0, 1);
+       ap9x_pci_setup_wmac_led_pin(1, 5);
+
+       ap9x_pci_setup_wmac_leds(0, wzrhpag300h_wmac0_leds_gpio,
+                               ARRAY_SIZE(wzrhpag300h_wmac0_leds_gpio));
+       ap9x_pci_setup_wmac_leds(1, wzrhpag300h_wmac1_leds_gpio,
+                               ARRAY_SIZE(wzrhpag300h_wmac1_leds_gpio));
 }
 
 MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H",