PKG_NAME:=mac80211
-PKG_VERSION:=2015-03-09
-PKG_RELEASE:=3
+PKG_VERSION:=2015-06-22
+PKG_RELEASE:=1
PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
PKG_BACKPORT_VERSION:=
-PKG_MD5SUM:=6d4b04e4ce8a1f54dabfb04f4709453c
+PKG_MD5SUM:=352b2b46d36a72aadc96161a3cefdb1c
PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.bz2
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
@set -e ; test -f .local-symbols || ( \
echo "/--------------" ;\
echo "| You shouldn't run make in the backports tree, but only in" ;\
-@@ -60,56 +62,60 @@ mrproper:
+@@ -60,57 +62,61 @@ mrproper:
echo "| (that isn't currently running.)" ;\
echo "\\--" ;\
false)
- done \
- ) > Kconfig.kernel ;\
- kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) kernelversion | \
-- sed 's/^\(\(3\|2\.6\)\.[0-9]\+\).*/\1/;t;d') ;\
+- sed 's/^\(\([3-4]\|2\.6\)\.[0-9]\+\).*/\1/;t;d') ;\
- test "$$kver" != "" || echo "Kernel version parse failed!" ;\
- test "$$kver" != "" ;\
- kvers="$$(seq 14 39 | sed 's/^/2.6./')" ;\
-- kvers="$$kvers $$(seq 0 99 | sed 's/^/3./')" ;\
+- kvers="$$kvers $$(seq 0 19 | sed 's/^/3./')" ;\
+- kvers="$$kvers $$(seq 0 99 | sed 's/^/4./')" ;\
- print=0 ;\
- for v in $$kvers ; do \
- if [ "$$print" = "1" ] ; then \
+
+Kconfig.versions: Kconfig.kernel
+ @kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) kernelversion | \
-+ sed 's/^\(\(3\|2\.6\)\.[0-9]\+\).*/\1/;t;d') ;\
++ sed 's/^\(\([3-4]\|2\.6\)\.[0-9]\+\).*/\1/;t;d') ;\
+ test "$$kver" != "" || echo "Kernel version parse failed!" ;\
+ test "$$kver" != "" ;\
+ kvers="$$(seq 14 39 | sed 's/^/2.6./')" ;\
-+ kvers="$$kvers $$(seq 0 99 | sed 's/^/3./')" ;\
++ kvers="$$kvers $$(seq 0 19 | sed 's/^/3./')" ;\
++ kvers="$$kvers $$(seq 0 99 | sed 's/^/4./')" ;\
+ print=0 ;\
+ for v in $$kvers ; do \
+ if [ "$$print" = "1" ] ; then \
--- a/backport-include/linux/debugfs.h
+++ b/backport-include/linux/debugfs.h
-@@ -3,6 +3,7 @@
- #include_next <linux/debugfs.h>
+@@ -4,6 +4,7 @@
#include <linux/version.h>
+ #include <linux/device.h>
#include <generated/utsrelease.h>
+#include <linux/device.h>
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
-@@ -1858,6 +1858,13 @@ void ieee80211_remove_interfaces(struct
+@@ -1916,6 +1916,13 @@ void ieee80211_remove_interfaces(struct
}
mutex_unlock(&local->iflist_mtx);
unregister_netdevice_many(&unreg_list);
+++ /dev/null
---- a/backport-include/asm/barrier.h
-+++ b/backport-include/asm/barrier.h
-@@ -1,9 +1,9 @@
--#ifndef __BACKPORT_ASM_GENERIC_BARRIER_H
--#define __BACKPORT_ASM_GENERIC_BARRIER_H
-+#ifndef __BACKPORT_ASM_BARRIER_H
-+#define __BACKPORT_ASM_BARRIER_H
- #include_next <asm/barrier.h>
-
- #ifndef dma_rmb
- #define dma_rmb() rmb()
- #endif
-
--#endif /* __BACKPORT_ASM_GENERIC_BARRIER_H */
-+#endif /* __BACKPORT_ASM_BARRIER_H */
+++ /dev/null
---- /dev/null
-+++ b/include/uapi/linux/mpls.h
-@@ -0,0 +1,34 @@
-+#ifndef _UAPI_MPLS_H
-+#define _UAPI_MPLS_H
-+
-+#include <linux/types.h>
-+#include <asm/byteorder.h>
-+
-+/* Reference: RFC 5462, RFC 3032
-+ *
-+ * 0 1 2 3
-+ * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
-+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+ * | Label | TC |S| TTL |
-+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+ *
-+ * Label: Label Value, 20 bits
-+ * TC: Traffic Class field, 3 bits
-+ * S: Bottom of Stack, 1 bit
-+ * TTL: Time to Live, 8 bits
-+ */
-+
-+struct mpls_label {
-+ __be32 entry;
-+};
-+
-+#define MPLS_LS_LABEL_MASK 0xFFFFF000
-+#define MPLS_LS_LABEL_SHIFT 12
-+#define MPLS_LS_TC_MASK 0x00000E00
-+#define MPLS_LS_TC_SHIFT 9
-+#define MPLS_LS_S_MASK 0x00000100
-+#define MPLS_LS_S_SHIFT 8
-+#define MPLS_LS_TTL_MASK 0x000000FF
-+#define MPLS_LS_TTL_SHIFT 0
-+
-+#endif /* _UAPI_MPLS_H */
+++ /dev/null
---- a/drivers/bcma/driver_pci.c
-+++ b/drivers/bcma/driver_pci.c
-@@ -282,39 +282,6 @@ void bcma_core_pci_power_save(struct bcm
- }
- EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
-
--int bcma_core_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
-- bool enable)
--{
-- struct pci_dev *pdev;
-- u32 coremask, tmp;
-- int err = 0;
--
-- if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
-- /* This bcma device is not on a PCI host-bus. So the IRQs are
-- * not routed through the PCI core.
-- * So we must not enable routing through the PCI core. */
-- goto out;
-- }
--
-- pdev = bus->host_pci;
--
-- err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
-- if (err)
-- goto out;
--
-- coremask = BIT(core->core_index) << 8;
-- if (enable)
-- tmp |= coremask;
-- else
-- tmp &= ~coremask;
--
-- err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
--
--out:
-- return err;
--}
--EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
--
- static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
- {
- u32 w;
---- a/drivers/bcma/host_pci.c
-+++ b/drivers/bcma/host_pci.c
-@@ -351,3 +351,37 @@ void bcma_host_pci_down(struct bcma_bus
- bcma_core_pci_down(&bus->drv_pci[0]);
- }
- EXPORT_SYMBOL_GPL(bcma_host_pci_down);
-+
-+/* See also si_pci_setup */
-+int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
-+ bool enable)
-+{
-+ struct pci_dev *pdev;
-+ u32 coremask, tmp;
-+ int err = 0;
-+
-+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
-+ /* This bcma device is not on a PCI host-bus. So the IRQs are
-+ * not routed through the PCI core.
-+ * So we must not enable routing through the PCI core. */
-+ goto out;
-+ }
-+
-+ pdev = bus->host_pci;
-+
-+ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
-+ if (err)
-+ goto out;
-+
-+ coremask = BIT(core->core_index) << 8;
-+ if (enable)
-+ tmp |= coremask;
-+ else
-+ tmp &= ~coremask;
-+
-+ err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
-+
-+out:
-+ return err;
-+}
-+EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl);
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -4866,7 +4866,7 @@ static int b43_wireless_core_init(struct
- switch (dev->dev->bus_type) {
- #ifdef CPTCFG_B43_BCMA
- case B43_BUS_BCMA:
-- bcma_core_pci_irq_ctl(dev->dev->bdev->bus,
-+ bcma_host_pci_irq_ctl(dev->dev->bdev->bus,
- dev->dev->bdev, true);
- bcma_host_pci_up(dev->dev->bdev->bus);
- break;
---- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
-+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
-@@ -4959,7 +4959,7 @@ static int brcms_b_up_prep(struct brcms_
- * Configure pci/pcmcia here instead of in brcms_c_attach()
- * to allow mfg hotswap: down, hotswap (chip power cycle), up.
- */
-- bcma_core_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
-+ bcma_host_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
- true);
-
- /*
--- a/.local-symbols
+++ b/.local-symbols
-@@ -344,40 +344,3 @@ USB_CDC_PHONET=
+@@ -448,43 +448,6 @@ USB_CDC_PHONET=
USB_IPHETH=
USB_SIERRA_NET=
USB_VL600=
-BCMA_BLOCKIO=
-BCMA_HOST_PCI_POSSIBLE=
-BCMA_HOST_PCI=
--BCMA_DRIVER_PCI_HOSTMODE=
-BCMA_HOST_SOC=
-BCMA_DRIVER_PCI=
+-BCMA_DRIVER_PCI_HOSTMODE=
-BCMA_DRIVER_MIPS=
-BCMA_SFLASH=
-BCMA_NFLASH=
-BCMA_DRIVER_GMAC_CMN=
-BCMA_DRIVER_GPIO=
-BCMA_DEBUG=
---- a/Makefile.kernel
-+++ b/Makefile.kernel
-@@ -38,8 +38,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/
- obj-$(CPTCFG_WLAN) += drivers/net/wireless/
- #obj-$(CPTCFG_BT) += net/bluetooth/
- #obj-$(CPTCFG_BT) += drivers/bluetooth/
--obj-$(CPTCFG_SSB) += drivers/ssb/
--obj-$(CPTCFG_BCMA) += drivers/bcma/
- #obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/
- obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/
- #obj-$(CPTCFG_NFC) += net/nfc/
+ NFC=
+ NFC_DIGITAL=
+ NFC_NCI=
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2866,7 +2866,7 @@ static struct ssb_device *b43_ssb_gpio_d
return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
#else
return bus->chipco.dev;
-@@ -4907,7 +4907,7 @@ static int b43_wireless_core_init(struct
+@@ -4903,7 +4903,7 @@ static int b43_wireless_core_init(struct
}
if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
--- a/Kconfig.sources
+++ b/Kconfig.sources
@@ -9,9 +9,6 @@ source "$BACKPORT_DIR/drivers/net/wirele
- #source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig"
+ source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig"
source "$BACKPORT_DIR/drivers/net/usb/Kconfig"
-source "$BACKPORT_DIR/drivers/ssb/Kconfig"
-source "$BACKPORT_DIR/drivers/bcma/Kconfig"
-
- #source "$BACKPORT_DIR/net/nfc/Kconfig"
+ source "$BACKPORT_DIR/net/nfc/Kconfig"
- #source "$BACKPORT_DIR/drivers/media/Kconfig"
+ source "$BACKPORT_DIR/drivers/media/Kconfig"
+--- a/Makefile.kernel
++++ b/Makefile.kernel
+@@ -38,8 +38,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/
+ obj-$(CPTCFG_WLAN) += drivers/net/wireless/
+ obj-$(CPTCFG_BT) += net/bluetooth/
+ obj-$(CPTCFG_BT) += drivers/bluetooth/
+-obj-$(CPTCFG_SSB) += drivers/ssb/
+-obj-$(CPTCFG_BCMA) += drivers/bcma/
+ obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/
+ obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/
+ obj-$(CPTCFG_NFC) += net/nfc/
+++ /dev/null
---- a/backport-include/linux/wait.h
-+++ b/backport-include/linux/wait.h
-@@ -23,7 +23,7 @@ backport_wait_on_bit_io(void *word, int
-
- #endif
-
--#if LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0)
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,12)
- #define WQ_FLAG_WOKEN 0x02
-
- #define wait_woken LINUX_BACKPORT(wait_woken)
---- a/compat/backport-3.19.c
-+++ b/compat/backport-3.19.c
-@@ -15,6 +15,7 @@
- #include <linux/netdevice.h>
- #include <linux/debugfs.h>
-
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,12)
- static inline bool is_kthread_should_stop(void)
- {
- return (current->flags & PF_KTHREAD) && kthread_should_stop();
-@@ -79,6 +80,7 @@ int woken_wake_function(wait_queue_t *wa
- return default_wake_function(wait, mode, sync, key);
- }
- EXPORT_SYMBOL(woken_wake_function);
-+#endif
-
- #ifdef __BACKPORT_NETDEV_RSS_KEY_FILL
- u8 netdev_rss_key[NETDEV_RSS_KEY_LEN];
--- /dev/null
+--- a/net/mac80211/Makefile
++++ b/net/mac80211/Makefile
+@@ -15,9 +15,7 @@ mac80211-y := \
+ michael.o \
+ tkip.o \
+ aes_ccm.o \
+- aes_gcm.o \
+ aes_cmac.o \
+- aes_gmac.o \
+ cfg.o \
+ ethtool.o \
+ rx.o \
+--- a/net/mac80211/aes_gcm.h
++++ b/net/mac80211/aes_gcm.h
+@@ -11,12 +11,28 @@
+
+ #include <linux/crypto.h>
+
+-void ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
+- u8 *data, size_t data_len, u8 *mic);
+-int ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
+- u8 *data, size_t data_len, u8 *mic);
+-struct crypto_aead *ieee80211_aes_gcm_key_setup_encrypt(const u8 key[],
+- size_t key_len);
+-void ieee80211_aes_gcm_key_free(struct crypto_aead *tfm);
++static inline void
++ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
++ u8 *data, size_t data_len, u8 *mic)
++{
++}
++
++static inline int
++ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
++ u8 *data, size_t data_len, u8 *mic)
++{
++ return -EOPNOTSUPP;
++}
++
++static inline struct crypto_aead *
++ieee80211_aes_gcm_key_setup_encrypt(const u8 key[], size_t key_len)
++{
++ return NULL;
++}
++
++static inline void
++ieee80211_aes_gcm_key_free(struct crypto_aead *tfm)
++{
++}
+
+ #endif /* AES_GCM_H */
+--- a/net/mac80211/aes_gmac.h
++++ b/net/mac80211/aes_gmac.h
+@@ -11,10 +11,22 @@
+
+ #include <linux/crypto.h>
+
+-struct crypto_aead *ieee80211_aes_gmac_key_setup(const u8 key[],
+- size_t key_len);
+-int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
+- const u8 *data, size_t data_len, u8 *mic);
+-void ieee80211_aes_gmac_key_free(struct crypto_aead *tfm);
++static inline struct crypto_aead *
++ieee80211_aes_gmac_key_setup(const u8 key[], size_t key_len)
++{
++ return NULL;
++}
++
++static inline int
++ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
++ const u8 *data, size_t data_len, u8 *mic)
++{
++ return -EOPNOTSUPP;
++}
++
++static inline void
++ieee80211_aes_gmac_key_free(struct crypto_aead *tfm)
++{
++}
+
+ #endif /* AES_GMAC_H */
+--- a/net/mac80211/aes_ccm.c
++++ b/net/mac80211/aes_ccm.c
+@@ -19,86 +19,126 @@
+ #include "key.h"
+ #include "aes_ccm.h"
+
+-void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
++static void aes_ccm_prepare(struct crypto_cipher *tfm, u8 *b_0, u8 *aad, u8 *s_0,
++ u8 *a, u8 *b)
++{
++ int i;
++
++ crypto_cipher_encrypt_one(tfm, b, b_0);
++
++ /* Extra Authenticate-only data (always two AES blocks) */
++ for (i = 0; i < AES_BLOCK_SIZE; i++)
++ aad[i] ^= b[i];
++ crypto_cipher_encrypt_one(tfm, b, aad);
++
++ aad += AES_BLOCK_SIZE;
++
++ for (i = 0; i < AES_BLOCK_SIZE; i++)
++ aad[i] ^= b[i];
++ crypto_cipher_encrypt_one(tfm, a, aad);
++
++ /* Mask out bits from auth-only-b_0 */
++ b_0[0] &= 0x07;
++
++ /* S_0 is used to encrypt T (= MIC) */
++ b_0[14] = 0;
++ b_0[15] = 0;
++ crypto_cipher_encrypt_one(tfm, s_0, b_0);
++}
++
++
++void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad,
+ u8 *data, size_t data_len, u8 *mic,
+ size_t mic_len)
+ {
+- struct scatterlist assoc, pt, ct[2];
++ int i, j, last_len, num_blocks;
++ u8 b[AES_BLOCK_SIZE];
++ u8 s_0[AES_BLOCK_SIZE];
++ u8 e[AES_BLOCK_SIZE];
++ u8 *pos, *cpos;
++
++ num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE);
++ last_len = data_len % AES_BLOCK_SIZE;
++ aes_ccm_prepare(tfm, b_0, aad, s_0, b, b);
++
++ /* Process payload blocks */
++ pos = data;
++ cpos = data;
++ for (j = 1; j <= num_blocks; j++) {
++ int blen = (j == num_blocks && last_len) ?
++ last_len : AES_BLOCK_SIZE;
++
++ /* Authentication followed by encryption */
++ for (i = 0; i < blen; i++)
++ b[i] ^= pos[i];
++ crypto_cipher_encrypt_one(tfm, b, b);
++
++ b_0[14] = (j >> 8) & 0xff;
++ b_0[15] = j & 0xff;
++ crypto_cipher_encrypt_one(tfm, e, b_0);
++ for (i = 0; i < blen; i++)
++ *cpos++ = *pos++ ^ e[i];
++ }
+
+- char aead_req_data[sizeof(struct aead_request) +
+- crypto_aead_reqsize(tfm)]
+- __aligned(__alignof__(struct aead_request));
+- struct aead_request *aead_req = (void *) aead_req_data;
+-
+- memset(aead_req, 0, sizeof(aead_req_data));
+-
+- sg_init_one(&pt, data, data_len);
+- sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad));
+- sg_init_table(ct, 2);
+- sg_set_buf(&ct[0], data, data_len);
+- sg_set_buf(&ct[1], mic, mic_len);
+-
+- aead_request_set_tfm(aead_req, tfm);
+- aead_request_set_assoc(aead_req, &assoc, assoc.length);
+- aead_request_set_crypt(aead_req, &pt, ct, data_len, b_0);
+-
+- crypto_aead_encrypt(aead_req);
++ for (i = 0; i < mic_len; i++)
++ mic[i] = b[i] ^ s_0[i];
+ }
+
+-int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
++int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad,
+ u8 *data, size_t data_len, u8 *mic,
+ size_t mic_len)
+ {
+- struct scatterlist assoc, pt, ct[2];
+- char aead_req_data[sizeof(struct aead_request) +
+- crypto_aead_reqsize(tfm)]
+- __aligned(__alignof__(struct aead_request));
+- struct aead_request *aead_req = (void *) aead_req_data;
+-
+- if (data_len == 0)
+- return -EINVAL;
+-
+- memset(aead_req, 0, sizeof(aead_req_data));
+-
+- sg_init_one(&pt, data, data_len);
+- sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad));
+- sg_init_table(ct, 2);
+- sg_set_buf(&ct[0], data, data_len);
+- sg_set_buf(&ct[1], mic, mic_len);
+-
+- aead_request_set_tfm(aead_req, tfm);
+- aead_request_set_assoc(aead_req, &assoc, assoc.length);
+- aead_request_set_crypt(aead_req, ct, &pt, data_len + mic_len, b_0);
++ int i, j, last_len, num_blocks;
++ u8 *pos, *cpos;
++ u8 a[AES_BLOCK_SIZE];
++ u8 b[AES_BLOCK_SIZE];
++ u8 s_0[AES_BLOCK_SIZE];
++
++ num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE);
++ last_len = data_len % AES_BLOCK_SIZE;
++ aes_ccm_prepare(tfm, b_0, aad, s_0, a, b);
++
++ /* Process payload blocks */
++ cpos = data;
++ pos = data;
++ for (j = 1; j <= num_blocks; j++) {
++ int blen = (j == num_blocks && last_len) ?
++ last_len : AES_BLOCK_SIZE;
++
++ /* Decryption followed by authentication */
++ b_0[14] = (j >> 8) & 0xff;
++ b_0[15] = j & 0xff;
++ crypto_cipher_encrypt_one(tfm, b, b_0);
++ for (i = 0; i < blen; i++) {
++ *pos = *cpos++ ^ b[i];
++ a[i] ^= *pos++;
++ }
++ crypto_cipher_encrypt_one(tfm, a, a);
++ }
++
++ for (i = 0; i < mic_len; i++) {
++ if ((mic[i] ^ s_0[i]) != a[i])
++ return -1;
++ }
+
+- return crypto_aead_decrypt(aead_req);
++ return 0;
+ }
+
+-struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[],
+- size_t key_len,
+- size_t mic_len)
++struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[],
++ size_t key_len,
++ size_t mic_len)
+ {
+- struct crypto_aead *tfm;
+- int err;
++ struct crypto_cipher *tfm;
+
+- tfm = crypto_alloc_aead("ccm(aes)", 0, CRYPTO_ALG_ASYNC);
+- if (IS_ERR(tfm))
+- return tfm;
+-
+- err = crypto_aead_setkey(tfm, key, key_len);
+- if (err)
+- goto free_aead;
+- err = crypto_aead_setauthsize(tfm, mic_len);
+- if (err)
+- goto free_aead;
++ tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
++ if (!IS_ERR(tfm))
++ crypto_cipher_setkey(tfm, key, key_len);
+
+ return tfm;
+-
+-free_aead:
+- crypto_free_aead(tfm);
+- return ERR_PTR(err);
+ }
+
+-void ieee80211_aes_key_free(struct crypto_aead *tfm)
++
++void ieee80211_aes_key_free(struct crypto_cipher *tfm)
+ {
+- crypto_free_aead(tfm);
++ crypto_free_cipher(tfm);
+ }
+--- a/net/mac80211/key.h
++++ b/net/mac80211/key.h
+@@ -84,7 +84,7 @@ struct ieee80211_key {
+ * Management frames.
+ */
+ u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_CCMP_PN_LEN];
+- struct crypto_aead *tfm;
++ struct crypto_cipher *tfm;
+ u32 replays; /* dot11RSNAStatsCCMPReplays */
+ } ccmp;
+ struct {
+--- a/net/mac80211/wpa.c
++++ b/net/mac80211/wpa.c
+@@ -304,7 +304,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
+ }
+
+
+-static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *b_0, u8 *aad)
++static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *b_0, u8 *aad,
++ u16 data_len)
+ {
+ __le16 mask_fc;
+ int a4_included, mgmt;
+@@ -334,14 +335,8 @@ static void ccmp_special_blocks(struct s
+ else
+ qos_tid = 0;
+
+- /* In CCM, the initial vectors (IV) used for CTR mode encryption and CBC
+- * mode authentication are not allowed to collide, yet both are derived
+- * from this vector b_0. We only set L := 1 here to indicate that the
+- * data size can be represented in (L+1) bytes. The CCM layer will take
+- * care of storing the data length in the top (L+1) bytes and setting
+- * and clearing the other bits as is required to derive the two IVs.
+- */
+- b_0[0] = 0x1;
++ /* First block, b_0 */
++ b_0[0] = 0x59; /* flags: Adata: 1, M: 011, L: 001 */
+
+ /* Nonce: Nonce Flags | A2 | PN
+ * Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7)
+@@ -349,6 +344,8 @@ static void ccmp_special_blocks(struct s
+ b_0[1] = qos_tid | (mgmt << 4);
+ memcpy(&b_0[2], hdr->addr2, ETH_ALEN);
+ memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN);
++ /* l(m) */
++ put_unaligned_be16(data_len, &b_0[14]);
+
+ /* AAD (extra authenticate-only data) / masked 802.11 header
+ * FC | A1 | A2 | A3 | SC | [A4] | [QC] */
+@@ -460,7 +457,7 @@ static int ccmp_encrypt_skb(struct ieee8
+ return 0;
+
+ pos += IEEE80211_CCMP_HDR_LEN;
+- ccmp_special_blocks(skb, pn, b_0, aad);
++ ccmp_special_blocks(skb, pn, b_0, aad, len);
+ ieee80211_aes_ccm_encrypt(key->u.ccmp.tfm, b_0, aad, pos, len,
+ skb_put(skb, mic_len), mic_len);
+
+@@ -531,7 +528,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee
+ u8 aad[2 * AES_BLOCK_SIZE];
+ u8 b_0[AES_BLOCK_SIZE];
+ /* hardware didn't decrypt/verify MIC */
+- ccmp_special_blocks(skb, pn, b_0, aad);
++ ccmp_special_blocks(skb, pn, b_0, aad, data_len);
+
+ if (ieee80211_aes_ccm_decrypt(
+ key->u.ccmp.tfm, b_0, aad,
+--- a/net/mac80211/aes_ccm.h
++++ b/net/mac80211/aes_ccm.h
+@@ -12,15 +12,15 @@
+
+ #include <linux/crypto.h>
+
+-struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[],
+- size_t key_len,
+- size_t mic_len);
+-void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
++struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[],
++ size_t key_len,
++ size_t mic_len);
++void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad,
+ u8 *data, size_t data_len, u8 *mic,
+ size_t mic_len);
+-int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
++int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad,
+ u8 *data, size_t data_len, u8 *mic,
+ size_t mic_len);
+-void ieee80211_aes_key_free(struct crypto_aead *tfm);
++void ieee80211_aes_key_free(struct crypto_cipher *tfm);
+
+ #endif /* AES_CCM_H */
+--- a/net/mac80211/Kconfig
++++ b/net/mac80211/Kconfig
+@@ -5,8 +5,6 @@ config MAC80211
+ depends on CRYPTO
+ depends on CRYPTO_ARC4
+ depends on CRYPTO_AES
+- select BPAUTO_CRYPTO_CCM
+- depends on CRYPTO_GCM
+ depends on CRC32
+ select BPAUTO_AVERAGE
+ ---help---
+++ /dev/null
-This patch reverts the following commits from wireless-testing:
-
-8ade538bf39b1ee53418528fdacd36b8e65621b9
-56c52da2d554f081e8fce58ecbcf6a40c605b95b
-2b2ba0db1c820d04d5143452d70012cd44d7b578
-00b9cfa3ff38401bd70c34b250ca13e5ea347b4a
-4f031fa9f188b2b0641ac20087d9e16bcfb4e49d
-6e1ee5d2e9e411892b5d84e3ea93e3fc88ac786c
-30ef7ef9672d92ab2cac37f60a31955c118321e7
-f359d3fe832e49eeec2232b2af5a9e3aee6b4862 (only the changes in aes_cmac.{c,h})
-7ec7c4a9a686c608315739ab6a2b0527a240883c
----
-
---- a/include/linux/ieee80211.h
-+++ b/include/linux/ieee80211.h
-@@ -1017,15 +1017,6 @@ struct ieee80211_mmie {
- u8 mic[8];
- } __packed;
-
--/* Management MIC information element (IEEE 802.11w) for GMAC and CMAC-256 */
--struct ieee80211_mmie_16 {
-- u8 element_id;
-- u8 length;
-- __le16 key_id;
-- u8 sequence_number[6];
-- u8 mic[16];
--} __packed;
--
- struct ieee80211_vendor_ie {
- u8 element_id;
- u8 len;
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -1306,8 +1306,8 @@ struct ieee80211_vif *wdev_to_ieee80211_
- * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates
- * that the key is pairwise rather then a shared key.
- * @IEEE80211_KEY_FLAG_SW_MGMT_TX: This flag should be set by the driver for a
-- * CCMP/GCMP key if it requires CCMP/GCMP encryption of management frames
-- * (MFP) to be done in software.
-+ * CCMP key if it requires CCMP encryption of management frames (MFP) to
-+ * be done in software.
- * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver
- * if space should be prepared for the IV, but the IV
- * itself should not be generated. Do not set together with
-@@ -1322,7 +1322,7 @@ struct ieee80211_vif *wdev_to_ieee80211_
- * RX, if your crypto engine can't deal with TX you can also set the
- * %IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW.
- * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the
-- * driver for a CCMP/GCMP key to indicate that is requires IV generation
-+ * driver for a CCMP key to indicate that is requires IV generation
- * only for managment frames (MFP).
- * @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the
- * driver for a key to indicate that sufficient tailroom must always
-@@ -4112,10 +4112,6 @@ void ieee80211_aes_cmac_calculate_k1_k2(
- * reverse order than in packet)
- * @aes_cmac: PN data, most significant byte first (big endian,
- * reverse order than in packet)
-- * @aes_gmac: PN data, most significant byte first (big endian,
-- * reverse order than in packet)
-- * @gcmp: PN data, most significant byte first (big endian,
-- * reverse order than in packet)
- */
- struct ieee80211_key_seq {
- union {
-@@ -4129,12 +4125,6 @@ struct ieee80211_key_seq {
- struct {
- u8 pn[6];
- } aes_cmac;
-- struct {
-- u8 pn[6];
-- } aes_gmac;
-- struct {
-- u8 pn[6];
-- } gcmp;
- };
- };
-
-@@ -4159,7 +4149,7 @@ void ieee80211_get_key_tx_seq(struct iee
- * ieee80211_get_key_rx_seq - get key RX sequence counter
- *
- * @keyconf: the parameter passed with the set key
-- * @tid: The TID, or -1 for the management frame value (CCMP/GCMP only);
-+ * @tid: The TID, or -1 for the management frame value (CCMP only);
- * the value on TID 0 is also used for non-QoS frames. For
- * CMAC, only TID 0 is valid.
- * @seq: buffer to receive the sequence data
-@@ -4195,7 +4185,7 @@ void ieee80211_set_key_tx_seq(struct iee
- * ieee80211_set_key_rx_seq - set key RX sequence counter
- *
- * @keyconf: the parameter passed with the set key
-- * @tid: The TID, or -1 for the management frame value (CCMP/GCMP only);
-+ * @tid: The TID, or -1 for the management frame value (CCMP only);
- * the value on TID 0 is also used for non-QoS frames. For
- * CMAC, only TID 0 is valid.
- * @seq: new sequence data
---- a/net/mac80211/Kconfig
-+++ b/net/mac80211/Kconfig
-@@ -5,8 +5,6 @@ config MAC80211
- depends on CRYPTO
- depends on CRYPTO_ARC4
- depends on CRYPTO_AES
-- select BPAUTO_CRYPTO_CCM
-- depends on CRYPTO_GCM
- depends on CRC32
- select BPAUTO_AVERAGE
- ---help---
---- a/net/mac80211/Makefile
-+++ b/net/mac80211/Makefile
-@@ -15,9 +15,7 @@ mac80211-y := \
- michael.o \
- tkip.o \
- aes_ccm.o \
-- aes_gcm.o \
- aes_cmac.o \
-- aes_gmac.o \
- cfg.o \
- ethtool.o \
- rx.o \
---- a/net/mac80211/aes_ccm.c
-+++ b/net/mac80211/aes_ccm.c
-@@ -2,8 +2,6 @@
- * Copyright 2003-2004, Instant802 Networks, Inc.
- * Copyright 2005-2006, Devicescape Software, Inc.
- *
-- * Rewrite: Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org>
-- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-@@ -19,82 +17,134 @@
- #include "key.h"
- #include "aes_ccm.h"
-
--void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
-- u8 *data, size_t data_len, u8 *mic,
-- size_t mic_len)
-+static void aes_ccm_prepare(struct crypto_cipher *tfm, u8 *scratch, u8 *a)
-+{
-+ int i;
-+ u8 *b_0, *aad, *b, *s_0;
-+
-+ b_0 = scratch + 3 * AES_BLOCK_SIZE;
-+ aad = scratch + 4 * AES_BLOCK_SIZE;
-+ b = scratch;
-+ s_0 = scratch + AES_BLOCK_SIZE;
-+
-+ crypto_cipher_encrypt_one(tfm, b, b_0);
-+
-+ /* Extra Authenticate-only data (always two AES blocks) */
-+ for (i = 0; i < AES_BLOCK_SIZE; i++)
-+ aad[i] ^= b[i];
-+ crypto_cipher_encrypt_one(tfm, b, aad);
-+
-+ aad += AES_BLOCK_SIZE;
-+
-+ for (i = 0; i < AES_BLOCK_SIZE; i++)
-+ aad[i] ^= b[i];
-+ crypto_cipher_encrypt_one(tfm, a, aad);
-+
-+ /* Mask out bits from auth-only-b_0 */
-+ b_0[0] &= 0x07;
-+
-+ /* S_0 is used to encrypt T (= MIC) */
-+ b_0[14] = 0;
-+ b_0[15] = 0;
-+ crypto_cipher_encrypt_one(tfm, s_0, b_0);
-+}
-+
-+
-+void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *scratch,
-+ u8 *data, size_t data_len,
-+ u8 *cdata, u8 *mic)
- {
-- struct scatterlist assoc, pt, ct[2];
-+ int i, j, last_len, num_blocks;
-+ u8 *pos, *cpos, *b, *s_0, *e, *b_0;
-
-- char aead_req_data[sizeof(struct aead_request) +
-- crypto_aead_reqsize(tfm)]
-- __aligned(__alignof__(struct aead_request));
-- struct aead_request *aead_req = (void *) aead_req_data;
--
-- memset(aead_req, 0, sizeof(aead_req_data));
--
-- sg_init_one(&pt, data, data_len);
-- sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad));
-- sg_init_table(ct, 2);
-- sg_set_buf(&ct[0], data, data_len);
-- sg_set_buf(&ct[1], mic, mic_len);
--
-- aead_request_set_tfm(aead_req, tfm);
-- aead_request_set_assoc(aead_req, &assoc, assoc.length);
-- aead_request_set_crypt(aead_req, &pt, ct, data_len, b_0);
-+ b = scratch;
-+ s_0 = scratch + AES_BLOCK_SIZE;
-+ e = scratch + 2 * AES_BLOCK_SIZE;
-+ b_0 = scratch + 3 * AES_BLOCK_SIZE;
-+
-+ num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE);
-+ last_len = data_len % AES_BLOCK_SIZE;
-+ aes_ccm_prepare(tfm, scratch, b);
-+
-+ /* Process payload blocks */
-+ pos = data;
-+ cpos = cdata;
-+ for (j = 1; j <= num_blocks; j++) {
-+ int blen = (j == num_blocks && last_len) ?
-+ last_len : AES_BLOCK_SIZE;
-+
-+ /* Authentication followed by encryption */
-+ for (i = 0; i < blen; i++)
-+ b[i] ^= pos[i];
-+ crypto_cipher_encrypt_one(tfm, b, b);
-+
-+ b_0[14] = (j >> 8) & 0xff;
-+ b_0[15] = j & 0xff;
-+ crypto_cipher_encrypt_one(tfm, e, b_0);
-+ for (i = 0; i < blen; i++)
-+ *cpos++ = *pos++ ^ e[i];
-+ }
-
-- crypto_aead_encrypt(aead_req);
-+ for (i = 0; i < IEEE80211_CCMP_MIC_LEN; i++)
-+ mic[i] = b[i] ^ s_0[i];
- }
-
--int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
-- u8 *data, size_t data_len, u8 *mic,
-- size_t mic_len)
-+
-+int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *scratch,
-+ u8 *cdata, size_t data_len, u8 *mic, u8 *data)
- {
-- struct scatterlist assoc, pt, ct[2];
-- char aead_req_data[sizeof(struct aead_request) +
-- crypto_aead_reqsize(tfm)]
-- __aligned(__alignof__(struct aead_request));
-- struct aead_request *aead_req = (void *) aead_req_data;
--
-- if (data_len == 0)
-- return -EINVAL;
--
-- memset(aead_req, 0, sizeof(aead_req_data));
--
-- sg_init_one(&pt, data, data_len);
-- sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad));
-- sg_init_table(ct, 2);
-- sg_set_buf(&ct[0], data, data_len);
-- sg_set_buf(&ct[1], mic, mic_len);
--
-- aead_request_set_tfm(aead_req, tfm);
-- aead_request_set_assoc(aead_req, &assoc, assoc.length);
-- aead_request_set_crypt(aead_req, ct, &pt, data_len + mic_len, b_0);
-+ int i, j, last_len, num_blocks;
-+ u8 *pos, *cpos, *b, *s_0, *a, *b_0;
-+
-+ b = scratch;
-+ s_0 = scratch + AES_BLOCK_SIZE;
-+ a = scratch + 2 * AES_BLOCK_SIZE;
-+ b_0 = scratch + 3 * AES_BLOCK_SIZE;
-+
-+ num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE);
-+ last_len = data_len % AES_BLOCK_SIZE;
-+ aes_ccm_prepare(tfm, scratch, a);
-+
-+ /* Process payload blocks */
-+ cpos = cdata;
-+ pos = data;
-+ for (j = 1; j <= num_blocks; j++) {
-+ int blen = (j == num_blocks && last_len) ?
-+ last_len : AES_BLOCK_SIZE;
-+
-+ /* Decryption followed by authentication */
-+ b_0[14] = (j >> 8) & 0xff;
-+ b_0[15] = j & 0xff;
-+ crypto_cipher_encrypt_one(tfm, b, b_0);
-+ for (i = 0; i < blen; i++) {
-+ *pos = *cpos++ ^ b[i];
-+ a[i] ^= *pos++;
-+ }
-+ crypto_cipher_encrypt_one(tfm, a, a);
-+ }
-+
-+ for (i = 0; i < IEEE80211_CCMP_MIC_LEN; i++) {
-+ if ((mic[i] ^ s_0[i]) != a[i])
-+ return -1;
-+ }
-
-- return crypto_aead_decrypt(aead_req);
-+ return 0;
- }
-
--struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[],
-- size_t key_len,
-- size_t mic_len)
-+
-+struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[])
- {
-- struct crypto_aead *tfm;
-- int err;
-+ struct crypto_cipher *tfm;
-
-- tfm = crypto_alloc_aead("ccm(aes)", 0, CRYPTO_ALG_ASYNC);
-- if (IS_ERR(tfm))
-- return tfm;
--
-- err = crypto_aead_setkey(tfm, key, key_len);
-- if (!err)
-- err = crypto_aead_setauthsize(tfm, mic_len);
-- if (!err)
-- return tfm;
-+ tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
-+ if (!IS_ERR(tfm))
-+ crypto_cipher_setkey(tfm, key, WLAN_KEY_LEN_CCMP);
-
-- crypto_free_aead(tfm);
-- return ERR_PTR(err);
-+ return tfm;
- }
-
--void ieee80211_aes_key_free(struct crypto_aead *tfm)
-+
-+void ieee80211_aes_key_free(struct crypto_cipher *tfm)
- {
-- crypto_free_aead(tfm);
-+ crypto_free_cipher(tfm);
- }
---- a/net/mac80211/aes_ccm.h
-+++ b/net/mac80211/aes_ccm.h
-@@ -12,15 +12,13 @@
-
- #include <linux/crypto.h>
-
--struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[],
-- size_t key_len,
-- size_t mic_len);
--void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
-- u8 *data, size_t data_len, u8 *mic,
-- size_t mic_len);
--int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
-- u8 *data, size_t data_len, u8 *mic,
-- size_t mic_len);
--void ieee80211_aes_key_free(struct crypto_aead *tfm);
-+struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[]);
-+void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *scratch,
-+ u8 *data, size_t data_len,
-+ u8 *cdata, u8 *mic);
-+int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *scratch,
-+ u8 *cdata, size_t data_len,
-+ u8 *mic, u8 *data);
-+void ieee80211_aes_key_free(struct crypto_cipher *tfm);
-
- #endif /* AES_CCM_H */
---- a/net/mac80211/aes_cmac.c
-+++ b/net/mac80211/aes_cmac.c
-@@ -18,8 +18,8 @@
- #include "key.h"
- #include "aes_cmac.h"
-
-+#define AES_CMAC_KEY_LEN 16
- #define CMAC_TLEN 8 /* CMAC TLen = 64 bits (8 octets) */
--#define CMAC_TLEN_256 16 /* CMAC TLen = 128 bits (16 octets) */
- #define AAD_LEN 20
-
-
-@@ -35,9 +35,9 @@ static void gf_mulx(u8 *pad)
- pad[AES_BLOCK_SIZE - 1] ^= 0x87;
- }
-
--static void aes_cmac_vector(struct crypto_cipher *tfm, size_t num_elem,
-- const u8 *addr[], const size_t *len, u8 *mac,
-- size_t mac_len)
-+
-+static void aes_128_cmac_vector(struct crypto_cipher *tfm, size_t num_elem,
-+ const u8 *addr[], const size_t *len, u8 *mac)
- {
- u8 cbc[AES_BLOCK_SIZE], pad[AES_BLOCK_SIZE];
- const u8 *pos, *end;
-@@ -88,7 +88,7 @@ static void aes_cmac_vector(struct crypt
- for (i = 0; i < AES_BLOCK_SIZE; i++)
- pad[i] ^= cbc[i];
- crypto_cipher_encrypt_one(tfm, pad, pad);
-- memcpy(mac, pad, mac_len);
-+ memcpy(mac, pad, CMAC_TLEN);
- }
-
-
-@@ -107,35 +107,17 @@ void ieee80211_aes_cmac(struct crypto_ci
- addr[2] = zero;
- len[2] = CMAC_TLEN;
-
-- aes_cmac_vector(tfm, 3, addr, len, mic, CMAC_TLEN);
-+ aes_128_cmac_vector(tfm, 3, addr, len, mic);
- }
-
--void ieee80211_aes_cmac_256(struct crypto_cipher *tfm, const u8 *aad,
-- const u8 *data, size_t data_len, u8 *mic)
--{
-- const u8 *addr[3];
-- size_t len[3];
-- u8 zero[CMAC_TLEN_256];
--
-- memset(zero, 0, CMAC_TLEN_256);
-- addr[0] = aad;
-- len[0] = AAD_LEN;
-- addr[1] = data;
-- len[1] = data_len - CMAC_TLEN_256;
-- addr[2] = zero;
-- len[2] = CMAC_TLEN_256;
--
-- aes_cmac_vector(tfm, 3, addr, len, mic, CMAC_TLEN_256);
--}
-
--struct crypto_cipher *ieee80211_aes_cmac_key_setup(const u8 key[],
-- size_t key_len)
-+struct crypto_cipher * ieee80211_aes_cmac_key_setup(const u8 key[])
- {
- struct crypto_cipher *tfm;
-
- tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
- if (!IS_ERR(tfm))
-- crypto_cipher_setkey(tfm, key, key_len);
-+ crypto_cipher_setkey(tfm, key, AES_CMAC_KEY_LEN);
-
- return tfm;
- }
---- a/net/mac80211/aes_cmac.h
-+++ b/net/mac80211/aes_cmac.h
-@@ -11,12 +11,9 @@
-
- #include <linux/crypto.h>
-
--struct crypto_cipher *ieee80211_aes_cmac_key_setup(const u8 key[],
-- size_t key_len);
-+struct crypto_cipher * ieee80211_aes_cmac_key_setup(const u8 key[]);
- void ieee80211_aes_cmac(struct crypto_cipher *tfm, const u8 *aad,
- const u8 *data, size_t data_len, u8 *mic);
--void ieee80211_aes_cmac_256(struct crypto_cipher *tfm, const u8 *aad,
-- const u8 *data, size_t data_len, u8 *mic);
- void ieee80211_aes_cmac_key_free(struct crypto_cipher *tfm);
-
- #endif /* AES_CMAC_H */
---- a/net/mac80211/aes_gcm.c
-+++ /dev/null
-@@ -1,95 +0,0 @@
--/*
-- * Copyright 2014-2015, Qualcomm Atheros, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/types.h>
--#include <linux/crypto.h>
--#include <linux/err.h>
--#include <crypto/aes.h>
--
--#include <net/mac80211.h>
--#include "key.h"
--#include "aes_gcm.h"
--
--void ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
-- u8 *data, size_t data_len, u8 *mic)
--{
-- struct scatterlist assoc, pt, ct[2];
--
-- char aead_req_data[sizeof(struct aead_request) +
-- crypto_aead_reqsize(tfm)]
-- __aligned(__alignof__(struct aead_request));
-- struct aead_request *aead_req = (void *)aead_req_data;
--
-- memset(aead_req, 0, sizeof(aead_req_data));
--
-- sg_init_one(&pt, data, data_len);
-- sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad));
-- sg_init_table(ct, 2);
-- sg_set_buf(&ct[0], data, data_len);
-- sg_set_buf(&ct[1], mic, IEEE80211_GCMP_MIC_LEN);
--
-- aead_request_set_tfm(aead_req, tfm);
-- aead_request_set_assoc(aead_req, &assoc, assoc.length);
-- aead_request_set_crypt(aead_req, &pt, ct, data_len, j_0);
--
-- crypto_aead_encrypt(aead_req);
--}
--
--int ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
-- u8 *data, size_t data_len, u8 *mic)
--{
-- struct scatterlist assoc, pt, ct[2];
-- char aead_req_data[sizeof(struct aead_request) +
-- crypto_aead_reqsize(tfm)]
-- __aligned(__alignof__(struct aead_request));
-- struct aead_request *aead_req = (void *)aead_req_data;
--
-- if (data_len == 0)
-- return -EINVAL;
--
-- memset(aead_req, 0, sizeof(aead_req_data));
--
-- sg_init_one(&pt, data, data_len);
-- sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad));
-- sg_init_table(ct, 2);
-- sg_set_buf(&ct[0], data, data_len);
-- sg_set_buf(&ct[1], mic, IEEE80211_GCMP_MIC_LEN);
--
-- aead_request_set_tfm(aead_req, tfm);
-- aead_request_set_assoc(aead_req, &assoc, assoc.length);
-- aead_request_set_crypt(aead_req, ct, &pt,
-- data_len + IEEE80211_GCMP_MIC_LEN, j_0);
--
-- return crypto_aead_decrypt(aead_req);
--}
--
--struct crypto_aead *ieee80211_aes_gcm_key_setup_encrypt(const u8 key[],
-- size_t key_len)
--{
-- struct crypto_aead *tfm;
-- int err;
--
-- tfm = crypto_alloc_aead("gcm(aes)", 0, CRYPTO_ALG_ASYNC);
-- if (IS_ERR(tfm))
-- return tfm;
--
-- err = crypto_aead_setkey(tfm, key, key_len);
-- if (!err)
-- err = crypto_aead_setauthsize(tfm, IEEE80211_GCMP_MIC_LEN);
-- if (!err)
-- return tfm;
--
-- crypto_free_aead(tfm);
-- return ERR_PTR(err);
--}
--
--void ieee80211_aes_gcm_key_free(struct crypto_aead *tfm)
--{
-- crypto_free_aead(tfm);
--}
---- a/net/mac80211/aes_gcm.h
-+++ /dev/null
-@@ -1,22 +0,0 @@
--/*
-- * Copyright 2014-2015, Qualcomm Atheros, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#ifndef AES_GCM_H
--#define AES_GCM_H
--
--#include <linux/crypto.h>
--
--void ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
-- u8 *data, size_t data_len, u8 *mic);
--int ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad,
-- u8 *data, size_t data_len, u8 *mic);
--struct crypto_aead *ieee80211_aes_gcm_key_setup_encrypt(const u8 key[],
-- size_t key_len);
--void ieee80211_aes_gcm_key_free(struct crypto_aead *tfm);
--
--#endif /* AES_GCM_H */
---- a/net/mac80211/aes_gmac.c
-+++ /dev/null
-@@ -1,84 +0,0 @@
--/*
-- * AES-GMAC for IEEE 802.11 BIP-GMAC-128 and BIP-GMAC-256
-- * Copyright 2015, Qualcomm Atheros, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/types.h>
--#include <linux/crypto.h>
--#include <linux/err.h>
--#include <crypto/aes.h>
--
--#include <net/mac80211.h>
--#include "key.h"
--#include "aes_gmac.h"
--
--#define GMAC_MIC_LEN 16
--#define GMAC_NONCE_LEN 12
--#define AAD_LEN 20
--
--int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
-- const u8 *data, size_t data_len, u8 *mic)
--{
-- struct scatterlist sg[3], ct[1];
-- char aead_req_data[sizeof(struct aead_request) +
-- crypto_aead_reqsize(tfm)]
-- __aligned(__alignof__(struct aead_request));
-- struct aead_request *aead_req = (void *)aead_req_data;
-- u8 zero[GMAC_MIC_LEN], iv[AES_BLOCK_SIZE];
--
-- if (data_len < GMAC_MIC_LEN)
-- return -EINVAL;
--
-- memset(aead_req, 0, sizeof(aead_req_data));
--
-- memset(zero, 0, GMAC_MIC_LEN);
-- sg_init_table(sg, 3);
-- sg_set_buf(&sg[0], aad, AAD_LEN);
-- sg_set_buf(&sg[1], data, data_len - GMAC_MIC_LEN);
-- sg_set_buf(&sg[2], zero, GMAC_MIC_LEN);
--
-- memcpy(iv, nonce, GMAC_NONCE_LEN);
-- memset(iv + GMAC_NONCE_LEN, 0, sizeof(iv) - GMAC_NONCE_LEN);
-- iv[AES_BLOCK_SIZE - 1] = 0x01;
--
-- sg_init_table(ct, 1);
-- sg_set_buf(&ct[0], mic, GMAC_MIC_LEN);
--
-- aead_request_set_tfm(aead_req, tfm);
-- aead_request_set_assoc(aead_req, sg, AAD_LEN + data_len);
-- aead_request_set_crypt(aead_req, NULL, ct, 0, iv);
--
-- crypto_aead_encrypt(aead_req);
--
-- return 0;
--}
--
--struct crypto_aead *ieee80211_aes_gmac_key_setup(const u8 key[],
-- size_t key_len)
--{
-- struct crypto_aead *tfm;
-- int err;
--
-- tfm = crypto_alloc_aead("gcm(aes)", 0, CRYPTO_ALG_ASYNC);
-- if (IS_ERR(tfm))
-- return tfm;
--
-- err = crypto_aead_setkey(tfm, key, key_len);
-- if (!err)
-- return tfm;
-- if (!err)
-- err = crypto_aead_setauthsize(tfm, GMAC_MIC_LEN);
--
-- crypto_free_aead(tfm);
-- return ERR_PTR(err);
--}
--
--void ieee80211_aes_gmac_key_free(struct crypto_aead *tfm)
--{
-- crypto_free_aead(tfm);
--}
---- a/net/mac80211/aes_gmac.h
-+++ /dev/null
-@@ -1,20 +0,0 @@
--/*
-- * Copyright 2015, Qualcomm Atheros, Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#ifndef AES_GMAC_H
--#define AES_GMAC_H
--
--#include <linux/crypto.h>
--
--struct crypto_aead *ieee80211_aes_gmac_key_setup(const u8 key[],
-- size_t key_len);
--int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
-- const u8 *data, size_t data_len, u8 *mic);
--void ieee80211_aes_gmac_key_free(struct crypto_aead *tfm);
--
--#endif /* AES_GMAC_H */
---- a/net/mac80211/cfg.c
-+++ b/net/mac80211/cfg.c
-@@ -162,13 +162,8 @@ static int ieee80211_add_key(struct wiph
- return -EINVAL;
- break;
- case WLAN_CIPHER_SUITE_CCMP:
-- case WLAN_CIPHER_SUITE_CCMP_256:
- case WLAN_CIPHER_SUITE_AES_CMAC:
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
- break;
- default:
- cs = ieee80211_cs_get(local, params->cipher, sdata->vif.type);
-@@ -353,7 +348,6 @@ static int ieee80211_get_key(struct wiph
- params.seq_len = 6;
- break;
- case WLAN_CIPHER_SUITE_CCMP:
-- case WLAN_CIPHER_SUITE_CCMP_256:
- pn64 = atomic64_read(&key->u.ccmp.tx_pn);
- seq[0] = pn64;
- seq[1] = pn64 >> 8;
-@@ -365,35 +359,10 @@ static int ieee80211_get_key(struct wiph
- params.seq_len = 6;
- break;
- case WLAN_CIPHER_SUITE_AES_CMAC:
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- pn64 = atomic64_read(&key->u.aes_cmac.tx_pn);
- seq[0] = pn64;
- seq[1] = pn64 >> 8;
- seq[2] = pn64 >> 16;
-- seq[3] = pn64 >> 24;
-- seq[4] = pn64 >> 32;
-- seq[5] = pn64 >> 40;
-- params.seq = seq;
-- params.seq_len = 6;
-- break;
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
-- pn64 = atomic64_read(&key->u.aes_gmac.tx_pn);
-- seq[0] = pn64;
-- seq[1] = pn64 >> 8;
-- seq[2] = pn64 >> 16;
-- seq[3] = pn64 >> 24;
-- seq[4] = pn64 >> 32;
-- seq[5] = pn64 >> 40;
-- params.seq = seq;
-- params.seq_len = 6;
-- break;
-- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
-- pn64 = atomic64_read(&key->u.gcmp.tx_pn);
-- seq[0] = pn64;
-- seq[1] = pn64 >> 8;
-- seq[2] = pn64 >> 16;
- seq[3] = pn64 >> 24;
- seq[4] = pn64 >> 32;
- seq[5] = pn64 >> 40;
---- a/net/mac80211/debugfs_key.c
-+++ b/net/mac80211/debugfs_key.c
-@@ -94,33 +94,17 @@ static ssize_t key_tx_spec_read(struct f
- key->u.tkip.tx.iv16);
- break;
- case WLAN_CIPHER_SUITE_CCMP:
-- case WLAN_CIPHER_SUITE_CCMP_256:
- pn = atomic64_read(&key->u.ccmp.tx_pn);
- len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
- (u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24),
- (u8)(pn >> 16), (u8)(pn >> 8), (u8)pn);
- break;
- case WLAN_CIPHER_SUITE_AES_CMAC:
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- pn = atomic64_read(&key->u.aes_cmac.tx_pn);
- len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
- (u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24),
- (u8)(pn >> 16), (u8)(pn >> 8), (u8)pn);
- break;
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
-- pn = atomic64_read(&key->u.aes_gmac.tx_pn);
-- len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
-- (u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24),
-- (u8)(pn >> 16), (u8)(pn >> 8), (u8)pn);
-- break;
-- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
-- pn = atomic64_read(&key->u.gcmp.tx_pn);
-- len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
-- (u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24),
-- (u8)(pn >> 16), (u8)(pn >> 8), (u8)pn);
-- break;
- default:
- return 0;
- }
-@@ -150,7 +134,6 @@ static ssize_t key_rx_spec_read(struct f
- len = p - buf;
- break;
- case WLAN_CIPHER_SUITE_CCMP:
-- case WLAN_CIPHER_SUITE_CCMP_256:
- for (i = 0; i < IEEE80211_NUM_TIDS + 1; i++) {
- rpn = key->u.ccmp.rx_pn[i];
- p += scnprintf(p, sizeof(buf)+buf-p,
-@@ -161,7 +144,6 @@ static ssize_t key_rx_spec_read(struct f
- len = p - buf;
- break;
- case WLAN_CIPHER_SUITE_AES_CMAC:
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- rpn = key->u.aes_cmac.rx_pn;
- p += scnprintf(p, sizeof(buf)+buf-p,
- "%02x%02x%02x%02x%02x%02x\n",
-@@ -169,26 +151,6 @@ static ssize_t key_rx_spec_read(struct f
- rpn[3], rpn[4], rpn[5]);
- len = p - buf;
- break;
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
-- rpn = key->u.aes_gmac.rx_pn;
-- p += scnprintf(p, sizeof(buf)+buf-p,
-- "%02x%02x%02x%02x%02x%02x\n",
-- rpn[0], rpn[1], rpn[2],
-- rpn[3], rpn[4], rpn[5]);
-- len = p - buf;
-- break;
-- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
-- for (i = 0; i < IEEE80211_NUM_TIDS + 1; i++) {
-- rpn = key->u.gcmp.rx_pn[i];
-- p += scnprintf(p, sizeof(buf)+buf-p,
-- "%02x%02x%02x%02x%02x%02x\n",
-- rpn[0], rpn[1], rpn[2],
-- rpn[3], rpn[4], rpn[5]);
-- }
-- len = p - buf;
-- break;
- default:
- return 0;
- }
-@@ -205,23 +167,12 @@ static ssize_t key_replays_read(struct f
-
- switch (key->conf.cipher) {
- case WLAN_CIPHER_SUITE_CCMP:
-- case WLAN_CIPHER_SUITE_CCMP_256:
- len = scnprintf(buf, sizeof(buf), "%u\n", key->u.ccmp.replays);
- break;
- case WLAN_CIPHER_SUITE_AES_CMAC:
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- len = scnprintf(buf, sizeof(buf), "%u\n",
- key->u.aes_cmac.replays);
- break;
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
-- len = scnprintf(buf, sizeof(buf), "%u\n",
-- key->u.aes_gmac.replays);
-- break;
-- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
-- len = scnprintf(buf, sizeof(buf), "%u\n", key->u.gcmp.replays);
-- break;
- default:
- return 0;
- }
-@@ -238,15 +189,9 @@ static ssize_t key_icverrors_read(struct
-
- switch (key->conf.cipher) {
- case WLAN_CIPHER_SUITE_AES_CMAC:
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- len = scnprintf(buf, sizeof(buf), "%u\n",
- key->u.aes_cmac.icverrors);
- break;
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
-- len = scnprintf(buf, sizeof(buf), "%u\n",
-- key->u.aes_gmac.icverrors);
-- break;
- default:
- return 0;
- }
---- a/net/mac80211/key.c
-+++ b/net/mac80211/key.c
-@@ -24,8 +24,6 @@
- #include "debugfs_key.h"
- #include "aes_ccm.h"
- #include "aes_cmac.h"
--#include "aes_gmac.h"
--#include "aes_gcm.h"
-
-
- /**
-@@ -164,13 +162,7 @@ static int ieee80211_key_enable_hw_accel
- case WLAN_CIPHER_SUITE_WEP104:
- case WLAN_CIPHER_SUITE_TKIP:
- case WLAN_CIPHER_SUITE_CCMP:
-- case WLAN_CIPHER_SUITE_CCMP_256:
- case WLAN_CIPHER_SUITE_AES_CMAC:
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
-- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
- /* all of these we can do in software - if driver can */
- if (ret == 1)
- return 0;
-@@ -394,26 +386,7 @@ ieee80211_key_alloc(u32 cipher, int idx,
- * Initialize AES key state here as an optimization so that
- * it does not need to be initialized for every packet.
- */
-- key->u.ccmp.tfm = ieee80211_aes_key_setup_encrypt(
-- key_data, key_len, IEEE80211_CCMP_MIC_LEN);
-- if (IS_ERR(key->u.ccmp.tfm)) {
-- err = PTR_ERR(key->u.ccmp.tfm);
-- kfree(key);
-- return ERR_PTR(err);
-- }
-- break;
-- case WLAN_CIPHER_SUITE_CCMP_256:
-- key->conf.iv_len = IEEE80211_CCMP_256_HDR_LEN;
-- key->conf.icv_len = IEEE80211_CCMP_256_MIC_LEN;
-- for (i = 0; seq && i < IEEE80211_NUM_TIDS + 1; i++)
-- for (j = 0; j < IEEE80211_CCMP_256_PN_LEN; j++)
-- key->u.ccmp.rx_pn[i][j] =
-- seq[IEEE80211_CCMP_256_PN_LEN - j - 1];
-- /* Initialize AES key state here as an optimization so that
-- * it does not need to be initialized for every packet.
-- */
-- key->u.ccmp.tfm = ieee80211_aes_key_setup_encrypt(
-- key_data, key_len, IEEE80211_CCMP_256_MIC_LEN);
-+ key->u.ccmp.tfm = ieee80211_aes_key_setup_encrypt(key_data);
- if (IS_ERR(key->u.ccmp.tfm)) {
- err = PTR_ERR(key->u.ccmp.tfm);
- kfree(key);
-@@ -421,12 +394,8 @@ ieee80211_key_alloc(u32 cipher, int idx,
- }
- break;
- case WLAN_CIPHER_SUITE_AES_CMAC:
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- key->conf.iv_len = 0;
-- if (cipher == WLAN_CIPHER_SUITE_AES_CMAC)
-- key->conf.icv_len = sizeof(struct ieee80211_mmie);
-- else
-- key->conf.icv_len = sizeof(struct ieee80211_mmie_16);
-+ key->conf.icv_len = sizeof(struct ieee80211_mmie);
- if (seq)
- for (j = 0; j < IEEE80211_CMAC_PN_LEN; j++)
- key->u.aes_cmac.rx_pn[j] =
-@@ -436,51 +405,13 @@ ieee80211_key_alloc(u32 cipher, int idx,
- * it does not need to be initialized for every packet.
- */
- key->u.aes_cmac.tfm =
-- ieee80211_aes_cmac_key_setup(key_data, key_len);
-+ ieee80211_aes_cmac_key_setup(key_data);
- if (IS_ERR(key->u.aes_cmac.tfm)) {
- err = PTR_ERR(key->u.aes_cmac.tfm);
- kfree(key);
- return ERR_PTR(err);
- }
- break;
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
-- key->conf.iv_len = 0;
-- key->conf.icv_len = sizeof(struct ieee80211_mmie_16);
-- if (seq)
-- for (j = 0; j < IEEE80211_GMAC_PN_LEN; j++)
-- key->u.aes_gmac.rx_pn[j] =
-- seq[IEEE80211_GMAC_PN_LEN - j - 1];
-- /* Initialize AES key state here as an optimization so that
-- * it does not need to be initialized for every packet.
-- */
-- key->u.aes_gmac.tfm =
-- ieee80211_aes_gmac_key_setup(key_data, key_len);
-- if (IS_ERR(key->u.aes_gmac.tfm)) {
-- err = PTR_ERR(key->u.aes_gmac.tfm);
-- kfree(key);
-- return ERR_PTR(err);
-- }
-- break;
-- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
-- key->conf.iv_len = IEEE80211_GCMP_HDR_LEN;
-- key->conf.icv_len = IEEE80211_GCMP_MIC_LEN;
-- for (i = 0; seq && i < IEEE80211_NUM_TIDS + 1; i++)
-- for (j = 0; j < IEEE80211_GCMP_PN_LEN; j++)
-- key->u.gcmp.rx_pn[i][j] =
-- seq[IEEE80211_GCMP_PN_LEN - j - 1];
-- /* Initialize AES key state here as an optimization so that
-- * it does not need to be initialized for every packet.
-- */
-- key->u.gcmp.tfm = ieee80211_aes_gcm_key_setup_encrypt(key_data,
-- key_len);
-- if (IS_ERR(key->u.gcmp.tfm)) {
-- err = PTR_ERR(key->u.gcmp.tfm);
-- kfree(key);
-- return ERR_PTR(err);
-- }
-- break;
- default:
- if (cs) {
- size_t len = (seq_len > MAX_PN_LEN) ?
-@@ -502,24 +433,10 @@ ieee80211_key_alloc(u32 cipher, int idx,
-
- static void ieee80211_key_free_common(struct ieee80211_key *key)
- {
-- switch (key->conf.cipher) {
-- case WLAN_CIPHER_SUITE_CCMP:
-- case WLAN_CIPHER_SUITE_CCMP_256:
-+ if (key->conf.cipher == WLAN_CIPHER_SUITE_CCMP)
- ieee80211_aes_key_free(key->u.ccmp.tfm);
-- break;
-- case WLAN_CIPHER_SUITE_AES_CMAC:
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
-+ if (key->conf.cipher == WLAN_CIPHER_SUITE_AES_CMAC)
- ieee80211_aes_cmac_key_free(key->u.aes_cmac.tfm);
-- break;
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
-- ieee80211_aes_gmac_key_free(key->u.aes_gmac.tfm);
-- break;
-- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
-- ieee80211_aes_gcm_key_free(key->u.gcmp.tfm);
-- break;
-- }
- kzfree(key);
- }
-
-@@ -826,7 +743,6 @@ void ieee80211_get_key_tx_seq(struct iee
- seq->tkip.iv16 = key->u.tkip.tx.iv16;
- break;
- case WLAN_CIPHER_SUITE_CCMP:
-- case WLAN_CIPHER_SUITE_CCMP_256:
- pn64 = atomic64_read(&key->u.ccmp.tx_pn);
- seq->ccmp.pn[5] = pn64;
- seq->ccmp.pn[4] = pn64 >> 8;
-@@ -836,7 +752,6 @@ void ieee80211_get_key_tx_seq(struct iee
- seq->ccmp.pn[0] = pn64 >> 40;
- break;
- case WLAN_CIPHER_SUITE_AES_CMAC:
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- pn64 = atomic64_read(&key->u.aes_cmac.tx_pn);
- seq->ccmp.pn[5] = pn64;
- seq->ccmp.pn[4] = pn64 >> 8;
-@@ -845,26 +760,6 @@ void ieee80211_get_key_tx_seq(struct iee
- seq->ccmp.pn[1] = pn64 >> 32;
- seq->ccmp.pn[0] = pn64 >> 40;
- break;
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
-- pn64 = atomic64_read(&key->u.aes_gmac.tx_pn);
-- seq->ccmp.pn[5] = pn64;
-- seq->ccmp.pn[4] = pn64 >> 8;
-- seq->ccmp.pn[3] = pn64 >> 16;
-- seq->ccmp.pn[2] = pn64 >> 24;
-- seq->ccmp.pn[1] = pn64 >> 32;
-- seq->ccmp.pn[0] = pn64 >> 40;
-- break;
-- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
-- pn64 = atomic64_read(&key->u.gcmp.tx_pn);
-- seq->gcmp.pn[5] = pn64;
-- seq->gcmp.pn[4] = pn64 >> 8;
-- seq->gcmp.pn[3] = pn64 >> 16;
-- seq->gcmp.pn[2] = pn64 >> 24;
-- seq->gcmp.pn[1] = pn64 >> 32;
-- seq->gcmp.pn[0] = pn64 >> 40;
-- break;
- default:
- WARN_ON(1);
- }
-@@ -887,7 +782,6 @@ void ieee80211_get_key_rx_seq(struct iee
- seq->tkip.iv16 = key->u.tkip.rx[tid].iv16;
- break;
- case WLAN_CIPHER_SUITE_CCMP:
-- case WLAN_CIPHER_SUITE_CCMP_256:
- if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS))
- return;
- if (tid < 0)
-@@ -897,29 +791,11 @@ void ieee80211_get_key_rx_seq(struct iee
- memcpy(seq->ccmp.pn, pn, IEEE80211_CCMP_PN_LEN);
- break;
- case WLAN_CIPHER_SUITE_AES_CMAC:
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- if (WARN_ON(tid != 0))
- return;
- pn = key->u.aes_cmac.rx_pn;
- memcpy(seq->aes_cmac.pn, pn, IEEE80211_CMAC_PN_LEN);
- break;
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
-- if (WARN_ON(tid != 0))
-- return;
-- pn = key->u.aes_gmac.rx_pn;
-- memcpy(seq->aes_gmac.pn, pn, IEEE80211_GMAC_PN_LEN);
-- break;
-- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
-- if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS))
-- return;
-- if (tid < 0)
-- pn = key->u.gcmp.rx_pn[IEEE80211_NUM_TIDS];
-- else
-- pn = key->u.gcmp.rx_pn[tid];
-- memcpy(seq->gcmp.pn, pn, IEEE80211_GCMP_PN_LEN);
-- break;
- }
- }
- EXPORT_SYMBOL(ieee80211_get_key_rx_seq);
-@@ -938,7 +814,6 @@ void ieee80211_set_key_tx_seq(struct iee
- key->u.tkip.tx.iv16 = seq->tkip.iv16;
- break;
- case WLAN_CIPHER_SUITE_CCMP:
-- case WLAN_CIPHER_SUITE_CCMP_256:
- pn64 = (u64)seq->ccmp.pn[5] |
- ((u64)seq->ccmp.pn[4] << 8) |
- ((u64)seq->ccmp.pn[3] << 16) |
-@@ -948,7 +823,6 @@ void ieee80211_set_key_tx_seq(struct iee
- atomic64_set(&key->u.ccmp.tx_pn, pn64);
- break;
- case WLAN_CIPHER_SUITE_AES_CMAC:
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- pn64 = (u64)seq->aes_cmac.pn[5] |
- ((u64)seq->aes_cmac.pn[4] << 8) |
- ((u64)seq->aes_cmac.pn[3] << 16) |
-@@ -957,26 +831,6 @@ void ieee80211_set_key_tx_seq(struct iee
- ((u64)seq->aes_cmac.pn[0] << 40);
- atomic64_set(&key->u.aes_cmac.tx_pn, pn64);
- break;
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
-- pn64 = (u64)seq->aes_gmac.pn[5] |
-- ((u64)seq->aes_gmac.pn[4] << 8) |
-- ((u64)seq->aes_gmac.pn[3] << 16) |
-- ((u64)seq->aes_gmac.pn[2] << 24) |
-- ((u64)seq->aes_gmac.pn[1] << 32) |
-- ((u64)seq->aes_gmac.pn[0] << 40);
-- atomic64_set(&key->u.aes_gmac.tx_pn, pn64);
-- break;
-- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
-- pn64 = (u64)seq->gcmp.pn[5] |
-- ((u64)seq->gcmp.pn[4] << 8) |
-- ((u64)seq->gcmp.pn[3] << 16) |
-- ((u64)seq->gcmp.pn[2] << 24) |
-- ((u64)seq->gcmp.pn[1] << 32) |
-- ((u64)seq->gcmp.pn[0] << 40);
-- atomic64_set(&key->u.gcmp.tx_pn, pn64);
-- break;
- default:
- WARN_ON(1);
- break;
-@@ -1000,7 +854,6 @@ void ieee80211_set_key_rx_seq(struct iee
- key->u.tkip.rx[tid].iv16 = seq->tkip.iv16;
- break;
- case WLAN_CIPHER_SUITE_CCMP:
-- case WLAN_CIPHER_SUITE_CCMP_256:
- if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS))
- return;
- if (tid < 0)
-@@ -1010,29 +863,11 @@ void ieee80211_set_key_rx_seq(struct iee
- memcpy(pn, seq->ccmp.pn, IEEE80211_CCMP_PN_LEN);
- break;
- case WLAN_CIPHER_SUITE_AES_CMAC:
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
- if (WARN_ON(tid != 0))
- return;
- pn = key->u.aes_cmac.rx_pn;
- memcpy(pn, seq->aes_cmac.pn, IEEE80211_CMAC_PN_LEN);
- break;
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
-- if (WARN_ON(tid != 0))
-- return;
-- pn = key->u.aes_gmac.rx_pn;
-- memcpy(pn, seq->aes_gmac.pn, IEEE80211_GMAC_PN_LEN);
-- break;
-- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
-- if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS))
-- return;
-- if (tid < 0)
-- pn = key->u.gcmp.rx_pn[IEEE80211_NUM_TIDS];
-- else
-- pn = key->u.gcmp.rx_pn[tid];
-- memcpy(pn, seq->gcmp.pn, IEEE80211_GCMP_PN_LEN);
-- break;
- default:
- WARN_ON(1);
- break;
---- a/net/mac80211/key.h
-+++ b/net/mac80211/key.h
-@@ -84,7 +84,7 @@ struct ieee80211_key {
- * Management frames.
- */
- u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_CCMP_PN_LEN];
-- struct crypto_aead *tfm;
-+ struct crypto_cipher *tfm;
- u32 replays; /* dot11RSNAStatsCCMPReplays */
- } ccmp;
- struct {
-@@ -95,24 +95,6 @@ struct ieee80211_key {
- u32 icverrors; /* dot11RSNAStatsCMACICVErrors */
- } aes_cmac;
- struct {
-- atomic64_t tx_pn;
-- u8 rx_pn[IEEE80211_GMAC_PN_LEN];
-- struct crypto_aead *tfm;
-- u32 replays; /* dot11RSNAStatsCMACReplays */
-- u32 icverrors; /* dot11RSNAStatsCMACICVErrors */
-- } aes_gmac;
-- struct {
-- atomic64_t tx_pn;
-- /* Last received packet number. The first
-- * IEEE80211_NUM_TIDS counters are used with Data
-- * frames and the last counter is used with Robust
-- * Management frames.
-- */
-- u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_GCMP_PN_LEN];
-- struct crypto_aead *tfm;
-- u32 replays; /* dot11RSNAStatsGCMPReplays */
-- } gcmp;
-- struct {
- /* generic cipher scheme */
- u8 rx_pn[IEEE80211_NUM_TIDS + 1][MAX_PN_LEN];
- } gen;
---- a/net/mac80211/main.c
-+++ b/net/mac80211/main.c
-@@ -666,15 +666,9 @@ static int ieee80211_init_cipher_suites(
- WLAN_CIPHER_SUITE_WEP104,
- WLAN_CIPHER_SUITE_TKIP,
- WLAN_CIPHER_SUITE_CCMP,
-- WLAN_CIPHER_SUITE_CCMP_256,
-- WLAN_CIPHER_SUITE_GCMP,
-- WLAN_CIPHER_SUITE_GCMP_256,
-
- /* keep last -- depends on hw flags! */
-- WLAN_CIPHER_SUITE_AES_CMAC,
-- WLAN_CIPHER_SUITE_BIP_CMAC_256,
-- WLAN_CIPHER_SUITE_BIP_GMAC_128,
-- WLAN_CIPHER_SUITE_BIP_GMAC_256,
-+ WLAN_CIPHER_SUITE_AES_CMAC
- };
-
- if (local->hw.flags & IEEE80211_HW_SW_CRYPTO_CONTROL ||
-@@ -713,7 +707,7 @@ static int ieee80211_init_cipher_suites(
- local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
-
- if (!have_mfp)
-- local->hw.wiphy->n_cipher_suites -= 4;
-+ local->hw.wiphy->n_cipher_suites--;
-
- if (!have_wep) {
- local->hw.wiphy->cipher_suites += 2;
-@@ -730,42 +724,32 @@ static int ieee80211_init_cipher_suites(
- /* Driver specifies cipher schemes only (but not cipher suites
- * including the schemes)
- *
-- * We start counting ciphers defined by schemes, TKIP, CCMP,
-- * CCMP-256, GCMP, and GCMP-256
-+ * We start counting ciphers defined by schemes, TKIP and CCMP
- */
-- n_suites = local->hw.n_cipher_schemes + 5;
-+ n_suites = local->hw.n_cipher_schemes + 2;
-
- /* check if we have WEP40 and WEP104 */
- if (have_wep)
- n_suites += 2;
-
-- /* check if we have AES_CMAC, BIP-CMAC-256, BIP-GMAC-128,
-- * BIP-GMAC-256
-- */
-+ /* check if we have AES_CMAC */
- if (have_mfp)
-- n_suites += 4;
-+ n_suites++;
-
- suites = kmalloc(sizeof(u32) * n_suites, GFP_KERNEL);
- if (!suites)
- return -ENOMEM;
-
- suites[w++] = WLAN_CIPHER_SUITE_CCMP;
-- suites[w++] = WLAN_CIPHER_SUITE_CCMP_256;
- suites[w++] = WLAN_CIPHER_SUITE_TKIP;
-- suites[w++] = WLAN_CIPHER_SUITE_GCMP;
-- suites[w++] = WLAN_CIPHER_SUITE_GCMP_256;
-
- if (have_wep) {
- suites[w++] = WLAN_CIPHER_SUITE_WEP40;
- suites[w++] = WLAN_CIPHER_SUITE_WEP104;
- }
-
-- if (have_mfp) {
-+ if (have_mfp)
- suites[w++] = WLAN_CIPHER_SUITE_AES_CMAC;
-- suites[w++] = WLAN_CIPHER_SUITE_BIP_CMAC_256;
-- suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_128;
-- suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_256;
-- }
-
- for (r = 0; r < local->hw.n_cipher_schemes; r++)
- suites[w++] = cs[r].cipher;
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -647,7 +647,6 @@ static int ieee80211_get_mmie_keyidx(str
- {
- struct ieee80211_mgmt *hdr = (struct ieee80211_mgmt *) skb->data;
- struct ieee80211_mmie *mmie;
-- struct ieee80211_mmie_16 *mmie16;
-
- if (skb->len < 24 + sizeof(*mmie) || !is_multicast_ether_addr(hdr->da))
- return -1;
-@@ -657,18 +656,11 @@ static int ieee80211_get_mmie_keyidx(str
-
- mmie = (struct ieee80211_mmie *)
- (skb->data + skb->len - sizeof(*mmie));
-- if (mmie->element_id == WLAN_EID_MMIE &&
-- mmie->length == sizeof(*mmie) - 2)
-- return le16_to_cpu(mmie->key_id);
--
-- mmie16 = (struct ieee80211_mmie_16 *)
-- (skb->data + skb->len - sizeof(*mmie16));
-- if (skb->len >= 24 + sizeof(*mmie16) &&
-- mmie16->element_id == WLAN_EID_MMIE &&
-- mmie16->length == sizeof(*mmie16) - 2)
-- return le16_to_cpu(mmie16->key_id);
-+ if (mmie->element_id != WLAN_EID_MMIE ||
-+ mmie->length != sizeof(*mmie) - 2)
-+ return -1;
-
-- return -1;
-+ return le16_to_cpu(mmie->key_id);
- }
-
- static int iwl80211_get_cs_keyid(const struct ieee80211_cipher_scheme *cs,
-@@ -1658,27 +1650,11 @@ ieee80211_rx_h_decrypt(struct ieee80211_
- result = ieee80211_crypto_tkip_decrypt(rx);
- break;
- case WLAN_CIPHER_SUITE_CCMP:
-- result = ieee80211_crypto_ccmp_decrypt(
-- rx, IEEE80211_CCMP_MIC_LEN);
-- break;
-- case WLAN_CIPHER_SUITE_CCMP_256:
-- result = ieee80211_crypto_ccmp_decrypt(
-- rx, IEEE80211_CCMP_256_MIC_LEN);
-+ result = ieee80211_crypto_ccmp_decrypt(rx);
- break;
- case WLAN_CIPHER_SUITE_AES_CMAC:
- result = ieee80211_crypto_aes_cmac_decrypt(rx);
- break;
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
-- result = ieee80211_crypto_aes_cmac_256_decrypt(rx);
-- break;
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
-- result = ieee80211_crypto_aes_gmac_decrypt(rx);
-- break;
-- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
-- result = ieee80211_crypto_gcmp_decrypt(rx);
-- break;
- default:
- result = ieee80211_crypto_hw_decrypt(rx);
- }
-@@ -1805,9 +1781,7 @@ ieee80211_rx_h_defragment(struct ieee802
- /* This is the first fragment of a new frame. */
- entry = ieee80211_reassemble_add(rx->sdata, frag, seq,
- rx->seqno_idx, &(rx->skb));
-- if (rx->key &&
-- (rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP ||
-- rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP_256) &&
-+ if (rx->key && rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP &&
- ieee80211_has_protected(fc)) {
- int queue = rx->security_idx;
- /* Store CCMP PN so that we can verify that the next
-@@ -1836,9 +1810,7 @@ ieee80211_rx_h_defragment(struct ieee802
- int i;
- u8 pn[IEEE80211_CCMP_PN_LEN], *rpn;
- int queue;
-- if (!rx->key ||
-- (rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP &&
-- rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP_256))
-+ if (!rx->key || rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP)
- return RX_DROP_UNUSABLE;
- memcpy(pn, entry->last_pn, IEEE80211_CCMP_PN_LEN);
- for (i = IEEE80211_CCMP_PN_LEN - 1; i >= 0; i--) {
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -626,9 +626,6 @@ ieee80211_tx_h_select_key(struct ieee802
- tx->key = NULL;
- break;
- case WLAN_CIPHER_SUITE_CCMP:
-- case WLAN_CIPHER_SUITE_CCMP_256:
-- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
- if (!ieee80211_is_data_present(hdr->frame_control) &&
- !ieee80211_use_mfp(hdr->frame_control, tx->sta,
- tx->skb))
-@@ -639,9 +636,6 @@ ieee80211_tx_h_select_key(struct ieee802
- ieee80211_is_mgmt(hdr->frame_control);
- break;
- case WLAN_CIPHER_SUITE_AES_CMAC:
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
- if (!ieee80211_is_mgmt(hdr->frame_control))
- tx->key = NULL;
- break;
-@@ -1017,21 +1011,9 @@ ieee80211_tx_h_encrypt(struct ieee80211_
- case WLAN_CIPHER_SUITE_TKIP:
- return ieee80211_crypto_tkip_encrypt(tx);
- case WLAN_CIPHER_SUITE_CCMP:
-- return ieee80211_crypto_ccmp_encrypt(
-- tx, IEEE80211_CCMP_MIC_LEN);
-- case WLAN_CIPHER_SUITE_CCMP_256:
-- return ieee80211_crypto_ccmp_encrypt(
-- tx, IEEE80211_CCMP_256_MIC_LEN);
-+ return ieee80211_crypto_ccmp_encrypt(tx);
- case WLAN_CIPHER_SUITE_AES_CMAC:
- return ieee80211_crypto_aes_cmac_encrypt(tx);
-- case WLAN_CIPHER_SUITE_BIP_CMAC_256:
-- return ieee80211_crypto_aes_cmac_256_encrypt(tx);
-- case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-- case WLAN_CIPHER_SUITE_BIP_GMAC_256:
-- return ieee80211_crypto_aes_gmac_encrypt(tx);
-- case WLAN_CIPHER_SUITE_GCMP:
-- case WLAN_CIPHER_SUITE_GCMP_256:
-- return ieee80211_crypto_gcmp_encrypt(tx);
- default:
- return ieee80211_crypto_hw_encrypt(tx);
- }
---- a/net/mac80211/wpa.c
-+++ b/net/mac80211/wpa.c
-@@ -22,8 +22,6 @@
- #include "tkip.h"
- #include "aes_ccm.h"
- #include "aes_cmac.h"
--#include "aes_gmac.h"
--#include "aes_gcm.h"
- #include "wpa.h"
-
- ieee80211_tx_result
-@@ -304,15 +302,22 @@ ieee80211_crypto_tkip_decrypt(struct iee
- }
-
-
--static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *b_0, u8 *aad)
-+static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *scratch,
-+ int encrypted)
- {
- __le16 mask_fc;
- int a4_included, mgmt;
- u8 qos_tid;
-- u16 len_a;
-+ u8 *b_0, *aad;
-+ u16 data_len, len_a;
- unsigned int hdrlen;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-
-+ memset(scratch, 0, 6 * AES_BLOCK_SIZE);
-+
-+ b_0 = scratch + 3 * AES_BLOCK_SIZE;
-+ aad = scratch + 4 * AES_BLOCK_SIZE;
-+
- /*
- * Mask FC: zero subtype b4 b5 b6 (if not mgmt)
- * Retry, PwrMgt, MoreData; set Protected
-@@ -334,21 +339,20 @@ static void ccmp_special_blocks(struct s
- else
- qos_tid = 0;
-
-- /* In CCM, the initial vectors (IV) used for CTR mode encryption and CBC
-- * mode authentication are not allowed to collide, yet both are derived
-- * from this vector b_0. We only set L := 1 here to indicate that the
-- * data size can be represented in (L+1) bytes. The CCM layer will take
-- * care of storing the data length in the top (L+1) bytes and setting
-- * and clearing the other bits as is required to derive the two IVs.
-- */
-- b_0[0] = 0x1;
-+ data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN;
-+ if (encrypted)
-+ data_len -= IEEE80211_CCMP_MIC_LEN;
-
-+ /* First block, b_0 */
-+ b_0[0] = 0x59; /* flags: Adata: 1, M: 011, L: 001 */
- /* Nonce: Nonce Flags | A2 | PN
- * Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7)
- */
- b_0[1] = qos_tid | (mgmt << 4);
- memcpy(&b_0[2], hdr->addr2, ETH_ALEN);
- memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN);
-+ /* l(m) */
-+ put_unaligned_be16(data_len, &b_0[14]);
-
- /* AAD (extra authenticate-only data) / masked 802.11 header
- * FC | A1 | A2 | A3 | SC | [A4] | [QC] */
-@@ -395,8 +399,7 @@ static inline void ccmp_hdr2pn(u8 *pn, u
- }
-
-
--static int ccmp_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb,
-- unsigned int mic_len)
-+static int ccmp_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb)
- {
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- struct ieee80211_key *key = tx->key;
-@@ -405,8 +408,7 @@ static int ccmp_encrypt_skb(struct ieee8
- u8 *pos;
- u8 pn[6];
- u64 pn64;
-- u8 aad[2 * AES_BLOCK_SIZE];
-- u8 b_0[AES_BLOCK_SIZE];
-+ u8 scratch[6 * AES_BLOCK_SIZE];
-
- if (info->control.hw_key &&
- !(info->control.hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV) &&
-@@ -427,7 +429,7 @@ static int ccmp_encrypt_skb(struct ieee8
- if (info->control.hw_key)
- tail = 0;
- else
-- tail = mic_len;
-+ tail = IEEE80211_CCMP_MIC_LEN;
-
- if (WARN_ON(skb_tailroom(skb) < tail ||
- skb_headroom(skb) < IEEE80211_CCMP_HDR_LEN))
-@@ -460,24 +462,23 @@ static int ccmp_encrypt_skb(struct ieee8
- return 0;
-
- pos += IEEE80211_CCMP_HDR_LEN;
-- ccmp_special_blocks(skb, pn, b_0, aad);
-- ieee80211_aes_ccm_encrypt(key->u.ccmp.tfm, b_0, aad, pos, len,
-- skb_put(skb, mic_len), mic_len);
-+ ccmp_special_blocks(skb, pn, scratch, 0);
-+ ieee80211_aes_ccm_encrypt(key->u.ccmp.tfm, scratch, pos, len,
-+ pos, skb_put(skb, IEEE80211_CCMP_MIC_LEN));
-
- return 0;
- }
-
-
- ieee80211_tx_result
--ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx,
-- unsigned int mic_len)
-+ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx)
- {
- struct sk_buff *skb;
-
- ieee80211_tx_set_protected(tx);
-
- skb_queue_walk(&tx->skbs, skb) {
-- if (ccmp_encrypt_skb(tx, skb, mic_len) < 0)
-+ if (ccmp_encrypt_skb(tx, skb) < 0)
- return TX_DROP;
- }
-
-@@ -486,8 +487,7 @@ ieee80211_crypto_ccmp_encrypt(struct iee
-
-
- ieee80211_rx_result
--ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx,
-- unsigned int mic_len)
-+ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx)
- {
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
- int hdrlen;
-@@ -504,7 +504,8 @@ ieee80211_crypto_ccmp_decrypt(struct iee
- !ieee80211_is_robust_mgmt_frame(skb))
- return RX_CONTINUE;
-
-- data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN - mic_len;
-+ data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN -
-+ IEEE80211_CCMP_MIC_LEN;
- if (!rx->sta || data_len < 0)
- return RX_DROP_UNUSABLE;
-
-@@ -526,23 +527,23 @@ ieee80211_crypto_ccmp_decrypt(struct iee
- }
-
- if (!(status->flag & RX_FLAG_DECRYPTED)) {
-- u8 aad[2 * AES_BLOCK_SIZE];
-- u8 b_0[AES_BLOCK_SIZE];
-+ u8 scratch[6 * AES_BLOCK_SIZE];
- /* hardware didn't decrypt/verify MIC */
-- ccmp_special_blocks(skb, pn, b_0, aad);
-+ ccmp_special_blocks(skb, pn, scratch, 1);
-
- if (ieee80211_aes_ccm_decrypt(
-- key->u.ccmp.tfm, b_0, aad,
-+ key->u.ccmp.tfm, scratch,
- skb->data + hdrlen + IEEE80211_CCMP_HDR_LEN,
- data_len,
-- skb->data + skb->len - mic_len, mic_len))
-+ skb->data + skb->len - IEEE80211_CCMP_MIC_LEN,
-+ skb->data + hdrlen + IEEE80211_CCMP_HDR_LEN))
- return RX_DROP_UNUSABLE;
- }
-
- memcpy(key->u.ccmp.rx_pn[queue], pn, IEEE80211_CCMP_PN_LEN);
-
- /* Remove CCMP header and MIC */
-- if (pskb_trim(skb, skb->len - mic_len))
-+ if (pskb_trim(skb, skb->len - IEEE80211_CCMP_MIC_LEN))
- return RX_DROP_UNUSABLE;
- memmove(skb->data + IEEE80211_CCMP_HDR_LEN, skb->data, hdrlen);
- skb_pull(skb, IEEE80211_CCMP_HDR_LEN);
-@@ -550,229 +551,6 @@ ieee80211_crypto_ccmp_decrypt(struct iee
- return RX_CONTINUE;
- }
-
--static void gcmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *j_0, u8 *aad)
--{
-- __le16 mask_fc;
-- u8 qos_tid;
-- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
--
-- memcpy(j_0, hdr->addr2, ETH_ALEN);
-- memcpy(&j_0[ETH_ALEN], pn, IEEE80211_GCMP_PN_LEN);
-- j_0[13] = 0;
-- j_0[14] = 0;
-- j_0[AES_BLOCK_SIZE - 1] = 0x01;
--
-- /* AAD (extra authenticate-only data) / masked 802.11 header
-- * FC | A1 | A2 | A3 | SC | [A4] | [QC]
-- */
-- put_unaligned_be16(ieee80211_hdrlen(hdr->frame_control) - 2, &aad[0]);
-- /* Mask FC: zero subtype b4 b5 b6 (if not mgmt)
-- * Retry, PwrMgt, MoreData; set Protected
-- */
-- mask_fc = hdr->frame_control;
-- mask_fc &= ~cpu_to_le16(IEEE80211_FCTL_RETRY |
-- IEEE80211_FCTL_PM | IEEE80211_FCTL_MOREDATA);
-- if (!ieee80211_is_mgmt(hdr->frame_control))
-- mask_fc &= ~cpu_to_le16(0x0070);
-- mask_fc |= cpu_to_le16(IEEE80211_FCTL_PROTECTED);
--
-- put_unaligned(mask_fc, (__le16 *)&aad[2]);
-- memcpy(&aad[4], &hdr->addr1, 3 * ETH_ALEN);
--
-- /* Mask Seq#, leave Frag# */
-- aad[22] = *((u8 *)&hdr->seq_ctrl) & 0x0f;
-- aad[23] = 0;
--
-- if (ieee80211_is_data_qos(hdr->frame_control))
-- qos_tid = *ieee80211_get_qos_ctl(hdr) &
-- IEEE80211_QOS_CTL_TID_MASK;
-- else
-- qos_tid = 0;
--
-- if (ieee80211_has_a4(hdr->frame_control)) {
-- memcpy(&aad[24], hdr->addr4, ETH_ALEN);
-- aad[30] = qos_tid;
-- aad[31] = 0;
-- } else {
-- memset(&aad[24], 0, ETH_ALEN + IEEE80211_QOS_CTL_LEN);
-- aad[24] = qos_tid;
-- }
--}
--
--static inline void gcmp_pn2hdr(u8 *hdr, const u8 *pn, int key_id)
--{
-- hdr[0] = pn[5];
-- hdr[1] = pn[4];
-- hdr[2] = 0;
-- hdr[3] = 0x20 | (key_id << 6);
-- hdr[4] = pn[3];
-- hdr[5] = pn[2];
-- hdr[6] = pn[1];
-- hdr[7] = pn[0];
--}
--
--static inline void gcmp_hdr2pn(u8 *pn, const u8 *hdr)
--{
-- pn[0] = hdr[7];
-- pn[1] = hdr[6];
-- pn[2] = hdr[5];
-- pn[3] = hdr[4];
-- pn[4] = hdr[1];
-- pn[5] = hdr[0];
--}
--
--static int gcmp_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb)
--{
-- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-- struct ieee80211_key *key = tx->key;
-- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-- int hdrlen, len, tail;
-- u8 *pos;
-- u8 pn[6];
-- u64 pn64;
-- u8 aad[2 * AES_BLOCK_SIZE];
-- u8 j_0[AES_BLOCK_SIZE];
--
-- if (info->control.hw_key &&
-- !(info->control.hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV) &&
-- !(info->control.hw_key->flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE) &&
-- !((info->control.hw_key->flags &
-- IEEE80211_KEY_FLAG_GENERATE_IV_MGMT) &&
-- ieee80211_is_mgmt(hdr->frame_control))) {
-- /* hwaccel has no need for preallocated room for GCMP
-- * header or MIC fields
-- */
-- return 0;
-- }
--
-- hdrlen = ieee80211_hdrlen(hdr->frame_control);
-- len = skb->len - hdrlen;
--
-- if (info->control.hw_key)
-- tail = 0;
-- else
-- tail = IEEE80211_GCMP_MIC_LEN;
--
-- if (WARN_ON(skb_tailroom(skb) < tail ||
-- skb_headroom(skb) < IEEE80211_GCMP_HDR_LEN))
-- return -1;
--
-- pos = skb_push(skb, IEEE80211_GCMP_HDR_LEN);
-- memmove(pos, pos + IEEE80211_GCMP_HDR_LEN, hdrlen);
-- skb_set_network_header(skb, skb_network_offset(skb) +
-- IEEE80211_GCMP_HDR_LEN);
--
-- /* the HW only needs room for the IV, but not the actual IV */
-- if (info->control.hw_key &&
-- (info->control.hw_key->flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE))
-- return 0;
--
-- hdr = (struct ieee80211_hdr *)pos;
-- pos += hdrlen;
--
-- pn64 = atomic64_inc_return(&key->u.gcmp.tx_pn);
--
-- pn[5] = pn64;
-- pn[4] = pn64 >> 8;
-- pn[3] = pn64 >> 16;
-- pn[2] = pn64 >> 24;
-- pn[1] = pn64 >> 32;
-- pn[0] = pn64 >> 40;
--
-- gcmp_pn2hdr(pos, pn, key->conf.keyidx);
--
-- /* hwaccel - with software GCMP header */
-- if (info->control.hw_key)
-- return 0;
--
-- pos += IEEE80211_GCMP_HDR_LEN;
-- gcmp_special_blocks(skb, pn, j_0, aad);
-- ieee80211_aes_gcm_encrypt(key->u.gcmp.tfm, j_0, aad, pos, len,
-- skb_put(skb, IEEE80211_GCMP_MIC_LEN));
--
-- return 0;
--}
--
--ieee80211_tx_result
--ieee80211_crypto_gcmp_encrypt(struct ieee80211_tx_data *tx)
--{
-- struct sk_buff *skb;
--
-- ieee80211_tx_set_protected(tx);
--
-- skb_queue_walk(&tx->skbs, skb) {
-- if (gcmp_encrypt_skb(tx, skb) < 0)
-- return TX_DROP;
-- }
--
-- return TX_CONTINUE;
--}
--
--ieee80211_rx_result
--ieee80211_crypto_gcmp_decrypt(struct ieee80211_rx_data *rx)
--{
-- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
-- int hdrlen;
-- struct ieee80211_key *key = rx->key;
-- struct sk_buff *skb = rx->skb;
-- struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
-- u8 pn[IEEE80211_GCMP_PN_LEN];
-- int data_len;
-- int queue;
--
-- hdrlen = ieee80211_hdrlen(hdr->frame_control);
--
-- if (!ieee80211_is_data(hdr->frame_control) &&
-- !ieee80211_is_robust_mgmt_frame(skb))
-- return RX_CONTINUE;
--
-- data_len = skb->len - hdrlen - IEEE80211_GCMP_HDR_LEN -
-- IEEE80211_GCMP_MIC_LEN;
-- if (!rx->sta || data_len < 0)
-- return RX_DROP_UNUSABLE;
--
-- if (status->flag & RX_FLAG_DECRYPTED) {
-- if (!pskb_may_pull(rx->skb, hdrlen + IEEE80211_GCMP_HDR_LEN))
-- return RX_DROP_UNUSABLE;
-- } else {
-- if (skb_linearize(rx->skb))
-- return RX_DROP_UNUSABLE;
-- }
--
-- gcmp_hdr2pn(pn, skb->data + hdrlen);
--
-- queue = rx->security_idx;
--
-- if (memcmp(pn, key->u.gcmp.rx_pn[queue], IEEE80211_GCMP_PN_LEN) <= 0) {
-- key->u.gcmp.replays++;
-- return RX_DROP_UNUSABLE;
-- }
--
-- if (!(status->flag & RX_FLAG_DECRYPTED)) {
-- u8 aad[2 * AES_BLOCK_SIZE];
-- u8 j_0[AES_BLOCK_SIZE];
-- /* hardware didn't decrypt/verify MIC */
-- gcmp_special_blocks(skb, pn, j_0, aad);
--
-- if (ieee80211_aes_gcm_decrypt(
-- key->u.gcmp.tfm, j_0, aad,
-- skb->data + hdrlen + IEEE80211_GCMP_HDR_LEN,
-- data_len,
-- skb->data + skb->len - IEEE80211_GCMP_MIC_LEN))
-- return RX_DROP_UNUSABLE;
-- }
--
-- memcpy(key->u.gcmp.rx_pn[queue], pn, IEEE80211_GCMP_PN_LEN);
--
-- /* Remove GCMP header and MIC */
-- if (pskb_trim(skb, skb->len - IEEE80211_GCMP_MIC_LEN))
-- return RX_DROP_UNUSABLE;
-- memmove(skb->data + IEEE80211_GCMP_HDR_LEN, skb->data, hdrlen);
-- skb_pull(skb, IEEE80211_GCMP_HDR_LEN);
--
-- return RX_CONTINUE;
--}
--
- static ieee80211_tx_result
- ieee80211_crypto_cs_encrypt(struct ieee80211_tx_data *tx,
- struct sk_buff *skb)
-@@ -956,48 +734,6 @@ ieee80211_crypto_aes_cmac_encrypt(struct
- return TX_CONTINUE;
- }
-
--ieee80211_tx_result
--ieee80211_crypto_aes_cmac_256_encrypt(struct ieee80211_tx_data *tx)
--{
-- struct sk_buff *skb;
-- struct ieee80211_tx_info *info;
-- struct ieee80211_key *key = tx->key;
-- struct ieee80211_mmie_16 *mmie;
-- u8 aad[20];
-- u64 pn64;
--
-- if (WARN_ON(skb_queue_len(&tx->skbs) != 1))
-- return TX_DROP;
--
-- skb = skb_peek(&tx->skbs);
--
-- info = IEEE80211_SKB_CB(skb);
--
-- if (info->control.hw_key)
-- return TX_CONTINUE;
--
-- if (WARN_ON(skb_tailroom(skb) < sizeof(*mmie)))
-- return TX_DROP;
--
-- mmie = (struct ieee80211_mmie_16 *)skb_put(skb, sizeof(*mmie));
-- mmie->element_id = WLAN_EID_MMIE;
-- mmie->length = sizeof(*mmie) - 2;
-- mmie->key_id = cpu_to_le16(key->conf.keyidx);
--
-- /* PN = PN + 1 */
-- pn64 = atomic64_inc_return(&key->u.aes_cmac.tx_pn);
--
-- bip_ipn_set64(mmie->sequence_number, pn64);
--
-- bip_aad(skb, aad);
--
-- /* MIC = AES-256-CMAC(IGTK, AAD || Management Frame Body || MMIE, 128)
-- */
-- ieee80211_aes_cmac_256(key->u.aes_cmac.tfm, aad,
-- skb->data + 24, skb->len - 24, mmie->mic);
--
-- return TX_CONTINUE;
--}
-
- ieee80211_rx_result
- ieee80211_crypto_aes_cmac_decrypt(struct ieee80211_rx_data *rx)
-@@ -1045,160 +781,6 @@ ieee80211_crypto_aes_cmac_decrypt(struct
-
- /* Remove MMIE */
- skb_trim(skb, skb->len - sizeof(*mmie));
--
-- return RX_CONTINUE;
--}
--
--ieee80211_rx_result
--ieee80211_crypto_aes_cmac_256_decrypt(struct ieee80211_rx_data *rx)
--{
-- struct sk_buff *skb = rx->skb;
-- struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
-- struct ieee80211_key *key = rx->key;
-- struct ieee80211_mmie_16 *mmie;
-- u8 aad[20], mic[16], ipn[6];
-- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
--
-- if (!ieee80211_is_mgmt(hdr->frame_control))
-- return RX_CONTINUE;
--
-- /* management frames are already linear */
--
-- if (skb->len < 24 + sizeof(*mmie))
-- return RX_DROP_UNUSABLE;
--
-- mmie = (struct ieee80211_mmie_16 *)
-- (skb->data + skb->len - sizeof(*mmie));
-- if (mmie->element_id != WLAN_EID_MMIE ||
-- mmie->length != sizeof(*mmie) - 2)
-- return RX_DROP_UNUSABLE; /* Invalid MMIE */
--
-- bip_ipn_swap(ipn, mmie->sequence_number);
--
-- if (memcmp(ipn, key->u.aes_cmac.rx_pn, 6) <= 0) {
-- key->u.aes_cmac.replays++;
-- return RX_DROP_UNUSABLE;
-- }
--
-- if (!(status->flag & RX_FLAG_DECRYPTED)) {
-- /* hardware didn't decrypt/verify MIC */
-- bip_aad(skb, aad);
-- ieee80211_aes_cmac_256(key->u.aes_cmac.tfm, aad,
-- skb->data + 24, skb->len - 24, mic);
-- if (memcmp(mic, mmie->mic, sizeof(mmie->mic)) != 0) {
-- key->u.aes_cmac.icverrors++;
-- return RX_DROP_UNUSABLE;
-- }
-- }
--
-- memcpy(key->u.aes_cmac.rx_pn, ipn, 6);
--
-- /* Remove MMIE */
-- skb_trim(skb, skb->len - sizeof(*mmie));
--
-- return RX_CONTINUE;
--}
--
--ieee80211_tx_result
--ieee80211_crypto_aes_gmac_encrypt(struct ieee80211_tx_data *tx)
--{
-- struct sk_buff *skb;
-- struct ieee80211_tx_info *info;
-- struct ieee80211_key *key = tx->key;
-- struct ieee80211_mmie_16 *mmie;
-- struct ieee80211_hdr *hdr;
-- u8 aad[20];
-- u64 pn64;
-- u8 nonce[12];
--
-- if (WARN_ON(skb_queue_len(&tx->skbs) != 1))
-- return TX_DROP;
--
-- skb = skb_peek(&tx->skbs);
--
-- info = IEEE80211_SKB_CB(skb);
--
-- if (info->control.hw_key)
-- return TX_CONTINUE;
--
-- if (WARN_ON(skb_tailroom(skb) < sizeof(*mmie)))
-- return TX_DROP;
--
-- mmie = (struct ieee80211_mmie_16 *)skb_put(skb, sizeof(*mmie));
-- mmie->element_id = WLAN_EID_MMIE;
-- mmie->length = sizeof(*mmie) - 2;
-- mmie->key_id = cpu_to_le16(key->conf.keyidx);
--
-- /* PN = PN + 1 */
-- pn64 = atomic64_inc_return(&key->u.aes_gmac.tx_pn);
--
-- bip_ipn_set64(mmie->sequence_number, pn64);
--
-- bip_aad(skb, aad);
--
-- hdr = (struct ieee80211_hdr *)skb->data;
-- memcpy(nonce, hdr->addr2, ETH_ALEN);
-- bip_ipn_swap(nonce + ETH_ALEN, mmie->sequence_number);
--
-- /* MIC = AES-GMAC(IGTK, AAD || Management Frame Body || MMIE, 128) */
-- if (ieee80211_aes_gmac(key->u.aes_gmac.tfm, aad, nonce,
-- skb->data + 24, skb->len - 24, mmie->mic) < 0)
-- return TX_DROP;
--
-- return TX_CONTINUE;
--}
--
--ieee80211_rx_result
--ieee80211_crypto_aes_gmac_decrypt(struct ieee80211_rx_data *rx)
--{
-- struct sk_buff *skb = rx->skb;
-- struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
-- struct ieee80211_key *key = rx->key;
-- struct ieee80211_mmie_16 *mmie;
-- u8 aad[20], mic[16], ipn[6], nonce[12];
-- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
--
-- if (!ieee80211_is_mgmt(hdr->frame_control))
-- return RX_CONTINUE;
--
-- /* management frames are already linear */
--
-- if (skb->len < 24 + sizeof(*mmie))
-- return RX_DROP_UNUSABLE;
--
-- mmie = (struct ieee80211_mmie_16 *)
-- (skb->data + skb->len - sizeof(*mmie));
-- if (mmie->element_id != WLAN_EID_MMIE ||
-- mmie->length != sizeof(*mmie) - 2)
-- return RX_DROP_UNUSABLE; /* Invalid MMIE */
--
-- bip_ipn_swap(ipn, mmie->sequence_number);
--
-- if (memcmp(ipn, key->u.aes_gmac.rx_pn, 6) <= 0) {
-- key->u.aes_gmac.replays++;
-- return RX_DROP_UNUSABLE;
-- }
--
-- if (!(status->flag & RX_FLAG_DECRYPTED)) {
-- /* hardware didn't decrypt/verify MIC */
-- bip_aad(skb, aad);
--
-- memcpy(nonce, hdr->addr2, ETH_ALEN);
-- memcpy(nonce + ETH_ALEN, ipn, 6);
--
-- if (ieee80211_aes_gmac(key->u.aes_gmac.tfm, aad, nonce,
-- skb->data + 24, skb->len - 24,
-- mic) < 0 ||
-- memcmp(mic, mmie->mic, sizeof(mmie->mic)) != 0) {
-- key->u.aes_gmac.icverrors++;
-- return RX_DROP_UNUSABLE;
-- }
-- }
--
-- memcpy(key->u.aes_gmac.rx_pn, ipn, 6);
--
-- /* Remove MMIE */
-- skb_trim(skb, skb->len - sizeof(*mmie));
-
- return RX_CONTINUE;
- }
---- a/net/mac80211/wpa.h
-+++ b/net/mac80211/wpa.h
-@@ -24,32 +24,17 @@ ieee80211_rx_result
- ieee80211_crypto_tkip_decrypt(struct ieee80211_rx_data *rx);
-
- ieee80211_tx_result
--ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx,
-- unsigned int mic_len);
-+ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx);
- ieee80211_rx_result
--ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx,
-- unsigned int mic_len);
-+ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx);
-
- ieee80211_tx_result
- ieee80211_crypto_aes_cmac_encrypt(struct ieee80211_tx_data *tx);
--ieee80211_tx_result
--ieee80211_crypto_aes_cmac_256_encrypt(struct ieee80211_tx_data *tx);
- ieee80211_rx_result
- ieee80211_crypto_aes_cmac_decrypt(struct ieee80211_rx_data *rx);
--ieee80211_rx_result
--ieee80211_crypto_aes_cmac_256_decrypt(struct ieee80211_rx_data *rx);
--ieee80211_tx_result
--ieee80211_crypto_aes_gmac_encrypt(struct ieee80211_tx_data *tx);
--ieee80211_rx_result
--ieee80211_crypto_aes_gmac_decrypt(struct ieee80211_rx_data *rx);
- ieee80211_tx_result
- ieee80211_crypto_hw_encrypt(struct ieee80211_tx_data *tx);
- ieee80211_rx_result
- ieee80211_crypto_hw_decrypt(struct ieee80211_rx_data *rx);
-
--ieee80211_tx_result
--ieee80211_crypto_gcmp_encrypt(struct ieee80211_tx_data *tx);
--ieee80211_rx_result
--ieee80211_crypto_gcmp_decrypt(struct ieee80211_rx_data *rx);
--
- #endif /* WPA_H */
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
-@@ -856,7 +856,6 @@ static int ieee80211_stop_ap(struct wiph
+@@ -886,7 +886,6 @@ static int ieee80211_stop_ap(struct wiph
sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF;
__sta_info_flush(sdata, true);
static int ieee80211_ifa6_changed(struct notifier_block *nb,
unsigned long data, void *arg)
{
-@@ -1057,14 +1057,14 @@ int ieee80211_register_hw(struct ieee802
+@@ -1086,14 +1086,14 @@ int ieee80211_register_hw(struct ieee802
if (result)
goto fail_pm_qos;
local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
result = register_inet6addr_notifier(&local->ifa6_notifier);
if (result)
-@@ -1073,13 +1073,13 @@ int ieee80211_register_hw(struct ieee802
+@@ -1102,13 +1102,13 @@ int ieee80211_register_hw(struct ieee802
return 0;
fail_ifa:
pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
&local->network_latency_notifier);
-@@ -1124,10 +1124,10 @@ void ieee80211_unregister_hw(struct ieee
+@@ -1141,10 +1141,10 @@ void ieee80211_unregister_hw(struct ieee
pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
&local->network_latency_notifier);
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
-@@ -1963,7 +1963,7 @@ static int ieee80211_scan(struct wiphy *
+@@ -2008,7 +2008,7 @@ static int ieee80211_scan(struct wiphy *
* the frames sent while scanning on other channel will be
* lost)
*/
--- /dev/null
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Sun, 7 Jun 2015 13:53:35 +0200
+Subject: [PATCH] ath9k: force rx_clear when disabling rx
+
+This makes stopping Rx more reliable and should reduce the frequency of
+Rx related DMA stop warnings
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/mac.c
++++ b/drivers/net/wireless/ath/ath9k/mac.c
+@@ -677,13 +677,15 @@ void ath9k_hw_startpcureceive(struct ath
+
+ ath9k_ani_reset(ah, is_scanning);
+
+- REG_CLR_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
++ REG_CLR_BIT(ah, AR_DIAG_SW,
++ AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT | AR_DIAG_FORCE_RX_CLEAR);
+ }
+ EXPORT_SYMBOL(ath9k_hw_startpcureceive);
+
+ void ath9k_hw_abortpcurecv(struct ath_hw *ah)
+ {
+- REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_ABORT | AR_DIAG_RX_DIS);
++ REG_SET_BIT(ah, AR_DIAG_SW,
++ AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT | AR_DIAG_FORCE_RX_CLEAR);
+
+ ath9k_hw_disable_mib_counters(ah);
+ }
+++ /dev/null
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Tue, 18 Nov 2014 23:58:51 +0100
-Subject: [PATCH] mac80211: add an intermediate software queue implementation
-
-This allows drivers to request per-vif and per-sta-tid queues from which
-they can pull frames. This makes it easier to keep the hardware queues
-short, and to improve fairness between clients and vifs.
-
-The task of scheduling packet transmission is left up to the driver -
-queueing is controlled by mac80211. Drivers can only dequeue packets by
-calling ieee80211_tx_dequeue. This makes it possible to add active queue
-management later without changing drivers using this code.
-
-This can also be used as a starting point to implement A-MSDU
-aggregation in a way that does not add artificially induced latency.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -84,6 +84,39 @@
- *
- */
-
-+/**
-+ * DOC: mac80211 software tx queueing
-+ *
-+ * mac80211 provides an optional intermediate queueing implementation designed
-+ * to allow the driver to keep hardware queues short and provide some fairness
-+ * between different stations/interfaces.
-+ * In this model, the driver pulls data frames from the mac80211 queue instead
-+ * of letting mac80211 push them via drv_tx().
-+ * Other frames (e.g. control or management) are still pushed using drv_tx().
-+ *
-+ * Drivers indicate that they use this model by implementing the .wake_tx_queue
-+ * driver operation.
-+ *
-+ * Intermediate queues (struct ieee80211_txq) are kept per-sta per-tid, with a
-+ * single per-vif queue for multicast data frames.
-+ *
-+ * The driver is expected to initialize its private per-queue data for stations
-+ * and interfaces in the .add_interface and .sta_add ops.
-+ *
-+ * The driver can't access the queue directly. To dequeue a frame, it calls
-+ * ieee80211_tx_dequeue(). Whenever mac80211 adds a new frame to a queue, it
-+ * calls the .wake_tx_queue driver op.
-+ *
-+ * For AP powersave TIM handling, the driver only needs to indicate if it has
-+ * buffered packets in the driver specific data structures by calling
-+ * ieee80211_sta_set_buffered(). For frames buffered in the ieee80211_txq
-+ * struct, mac80211 sets the appropriate TIM PVB bits and calls
-+ * .release_buffered_frames().
-+ * In that callback the driver is therefore expected to release its own
-+ * buffered frames and afterwards also frames from the ieee80211_txq (obtained
-+ * via the usual ieee80211_tx_dequeue).
-+ */
-+
- struct device;
-
- /**
-@@ -1246,6 +1279,7 @@ enum ieee80211_vif_flags {
- * monitor interface (if that is requested.)
- * @drv_priv: data area for driver use, will always be aligned to
- * sizeof(void *).
-+ * @txq: the multicast data TX queue (if driver uses the TXQ abstraction)
- */
- struct ieee80211_vif {
- enum nl80211_iftype type;
-@@ -1257,6 +1291,8 @@ struct ieee80211_vif {
- u8 cab_queue;
- u8 hw_queue[IEEE80211_NUM_ACS];
-
-+ struct ieee80211_txq *txq;
-+
- struct ieee80211_chanctx_conf __rcu *chanctx_conf;
-
- u32 driver_flags;
-@@ -1501,6 +1537,7 @@ struct ieee80211_sta_rates {
- * @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only
- * valid if the STA is a TDLS peer in the first place.
- * @mfp: indicates whether the STA uses management frame protection or not.
-+ * @txq: per-TID data TX queues (if driver uses the TXQ abstraction)
- */
- struct ieee80211_sta {
- u32 supp_rates[IEEE80211_NUM_BANDS];
-@@ -1519,6 +1556,8 @@ struct ieee80211_sta {
- bool tdls_initiator;
- bool mfp;
-
-+ struct ieee80211_txq *txq[IEEE80211_NUM_TIDS];
-+
- /* must be last */
- u8 drv_priv[0] __aligned(sizeof(void *));
- };
-@@ -1547,6 +1586,27 @@ struct ieee80211_tx_control {
- };
-
- /**
-+ * struct ieee80211_txq - Software intermediate tx queue
-+ *
-+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
-+ * @sta: station table entry, %NULL for per-vif queue
-+ * @tid: the TID for this queue (unused for per-vif queue)
-+ * @ac: the AC for this queue
-+ *
-+ * The driver can obtain packets from this queue by calling
-+ * ieee80211_tx_dequeue().
-+ */
-+struct ieee80211_txq {
-+ struct ieee80211_vif *vif;
-+ struct ieee80211_sta *sta;
-+ u8 tid;
-+ u8 ac;
-+
-+ /* must be last */
-+ u8 drv_priv[0] __aligned(sizeof(void *));
-+};
-+
-+/**
- * enum ieee80211_hw_flags - hardware flags
- *
- * These flags are used to indicate hardware capabilities to
-@@ -1770,6 +1830,8 @@ enum ieee80211_hw_flags {
- * within &struct ieee80211_sta.
- * @chanctx_data_size: size (in bytes) of the drv_priv data area
- * within &struct ieee80211_chanctx_conf.
-+ * @txq_data_size: size (in bytes) of the drv_priv data area
-+ * within @struct ieee80211_txq.
- *
- * @max_rates: maximum number of alternate rate retry stages the hw
- * can handle.
-@@ -1818,6 +1880,9 @@ enum ieee80211_hw_flags {
- * @n_cipher_schemes: a size of an array of cipher schemes definitions.
- * @cipher_schemes: a pointer to an array of cipher scheme definitions
- * supported by HW.
-+ *
-+ * @txq_ac_max_pending: maximum number of frames per AC pending in all txq
-+ * entries for a vif.
- */
- struct ieee80211_hw {
- struct ieee80211_conf conf;
-@@ -1830,6 +1895,7 @@ struct ieee80211_hw {
- int vif_data_size;
- int sta_data_size;
- int chanctx_data_size;
-+ int txq_data_size;
- u16 queues;
- u16 max_listen_interval;
- s8 max_signal;
-@@ -1846,6 +1912,7 @@ struct ieee80211_hw {
- u8 uapsd_max_sp_len;
- u8 n_cipher_schemes;
- const struct ieee80211_cipher_scheme *cipher_schemes;
-+ int txq_ac_max_pending;
- };
-
- /**
-@@ -3007,6 +3074,8 @@ enum ieee80211_reconfig_type {
- * response template is provided, together with the location of the
- * switch-timing IE within the template. The skb can only be used within
- * the function call.
-+ *
-+ * @wake_tx_queue: Called when new packets have been added to the queue.
- */
- struct ieee80211_ops {
- void (*tx)(struct ieee80211_hw *hw,
-@@ -3238,6 +3307,9 @@ struct ieee80211_ops {
- void (*tdls_recv_channel_switch)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_tdls_ch_sw_params *params);
-+
-+ void (*wake_tx_queue)(struct ieee80211_hw *hw,
-+ struct ieee80211_txq *txq);
- };
-
- /**
-@@ -5249,4 +5321,15 @@ void ieee80211_unreserve_tid(struct ieee
- */
- size_t ieee80211_ie_split(const u8 *ies, size_t ielen,
- const u8 *ids, int n_ids, size_t offset);
-+
-+/**
-+ * ieee80211_tx_dequeue - dequeue a packet from a software tx queue
-+ *
-+ * @hw: pointer as obtained from ieee80211_alloc_hw()
-+ * @txq: pointer obtained from station or virtual interface
-+ *
-+ * Returns the skb if successful, %NULL if no frame was available.
-+ */
-+struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
-+ struct ieee80211_txq *txq);
- #endif /* MAC80211_H */
---- a/net/mac80211/driver-ops.h
-+++ b/net/mac80211/driver-ops.h
-@@ -1367,4 +1367,16 @@ drv_tdls_recv_channel_switch(struct ieee
- trace_drv_return_void(local);
- }
-
-+static inline void drv_wake_tx_queue(struct ieee80211_local *local,
-+ struct txq_info *txq)
-+{
-+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(txq->txq.vif);
-+
-+ if (!check_sdata_in_driver(sdata))
-+ return;
-+
-+ trace_drv_wake_tx_queue(local, sdata, txq);
-+ local->ops->wake_tx_queue(&local->hw, &txq->txq);
-+}
-+
- #endif /* __MAC80211_DRIVER_OPS */
---- a/net/mac80211/ieee80211_i.h
-+++ b/net/mac80211/ieee80211_i.h
-@@ -809,6 +809,19 @@ struct mac80211_qos_map {
- struct rcu_head rcu_head;
- };
-
-+enum txq_info_flags {
-+ IEEE80211_TXQ_STOP,
-+ IEEE80211_TXQ_AMPDU,
-+};
-+
-+struct txq_info {
-+ struct sk_buff_head queue;
-+ unsigned long flags;
-+
-+ /* keep last! */
-+ struct ieee80211_txq txq;
-+};
-+
- struct ieee80211_sub_if_data {
- struct list_head list;
-
-@@ -853,6 +866,7 @@ struct ieee80211_sub_if_data {
- bool control_port_no_encrypt;
- int encrypt_headroom;
-
-+ atomic_t txqs_len[IEEE80211_NUM_ACS];
- struct ieee80211_tx_queue_params tx_conf[IEEE80211_NUM_ACS];
- struct mac80211_qos_map __rcu *qos_map;
-
-@@ -1453,6 +1467,10 @@ static inline struct ieee80211_local *hw
- return container_of(hw, struct ieee80211_local, hw);
- }
-
-+static inline struct txq_info *to_txq_info(struct ieee80211_txq *txq)
-+{
-+ return container_of(txq, struct txq_info, txq);
-+}
-
- static inline int ieee80211_bssid_match(const u8 *raddr, const u8 *addr)
- {
-@@ -1905,6 +1923,9 @@ static inline bool ieee80211_can_run_wor
- return true;
- }
-
-+void ieee80211_init_tx_queue(struct ieee80211_sub_if_data *sdata,
-+ struct sta_info *sta,
-+ struct txq_info *txq, int tid);
- void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
- u16 transaction, u16 auth_alg, u16 status,
- const u8 *extra, size_t extra_len, const u8 *bssid,
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -969,6 +969,13 @@ static void ieee80211_do_stop(struct iee
- }
- spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
-
-+ if (sdata->vif.txq) {
-+ struct txq_info *txqi = to_txq_info(sdata->vif.txq);
-+
-+ ieee80211_purge_tx_queue(&local->hw, &txqi->queue);
-+ atomic_set(&sdata->txqs_len[txqi->txq.ac], 0);
-+ }
-+
- if (local->open_count == 0)
- ieee80211_clear_tx_pending(local);
-
-@@ -1674,6 +1681,7 @@ int ieee80211_if_add(struct ieee80211_lo
- {
- struct net_device *ndev = NULL;
- struct ieee80211_sub_if_data *sdata = NULL;
-+ struct txq_info *txqi;
- int ret, i;
- int txqs = 1;
-
-@@ -1693,10 +1701,18 @@ int ieee80211_if_add(struct ieee80211_lo
- ieee80211_assign_perm_addr(local, wdev->address, type);
- memcpy(sdata->vif.addr, wdev->address, ETH_ALEN);
- } else {
-+ int size = ALIGN(sizeof(*sdata) + local->hw.vif_data_size,
-+ sizeof(void *));
-+ int txq_size = 0;
-+
-+ if (local->ops->wake_tx_queue)
-+ txq_size += sizeof(struct txq_info) +
-+ local->hw.txq_data_size;
-+
- if (local->hw.queues >= IEEE80211_NUM_ACS)
- txqs = IEEE80211_NUM_ACS;
-
-- ndev = alloc_netdev_mqs(sizeof(*sdata) + local->hw.vif_data_size,
-+ ndev = alloc_netdev_mqs(size + txq_size,
- name, NET_NAME_UNKNOWN,
- ieee80211_if_setup, txqs, 1);
- if (!ndev)
-@@ -1731,6 +1747,11 @@ int ieee80211_if_add(struct ieee80211_lo
- memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN);
- memcpy(sdata->name, ndev->name, IFNAMSIZ);
-
-+ if (txq_size) {
-+ txqi = netdev_priv(ndev) + size;
-+ ieee80211_init_tx_queue(sdata, NULL, txqi, 0);
-+ }
-+
- sdata->dev = ndev;
- }
-
---- a/net/mac80211/main.c
-+++ b/net/mac80211/main.c
-@@ -1019,6 +1019,9 @@ int ieee80211_register_hw(struct ieee802
-
- local->dynamic_ps_forced_timeout = -1;
-
-+ if (!local->hw.txq_ac_max_pending)
-+ local->hw.txq_ac_max_pending = 64;
-+
- result = ieee80211_wep_init(local);
- if (result < 0)
- wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
---- a/net/mac80211/sta_info.c
-+++ b/net/mac80211/sta_info.c
-@@ -118,6 +118,16 @@ static void __cleanup_single_sta(struct
- atomic_dec(&ps->num_sta_ps);
- }
-
-+ if (sta->sta.txq[0]) {
-+ for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
-+ struct txq_info *txqi = to_txq_info(sta->sta.txq[i]);
-+ int n = skb_queue_len(&txqi->queue);
-+
-+ ieee80211_purge_tx_queue(&local->hw, &txqi->queue);
-+ atomic_sub(n, &sdata->txqs_len[txqi->txq.ac]);
-+ }
-+ }
-+
- for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
- local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]);
- ieee80211_purge_tx_queue(&local->hw, &sta->ps_tx_buf[ac]);
-@@ -234,6 +244,8 @@ void sta_info_free(struct ieee80211_loca
-
- sta_dbg(sta->sdata, "Destroyed STA %pM\n", sta->sta.addr);
-
-+ if (sta->sta.txq[0])
-+ kfree(to_txq_info(sta->sta.txq[0]));
- kfree(rcu_dereference_raw(sta->sta.rates));
- kfree(sta);
- }
-@@ -285,11 +297,12 @@ struct sta_info *sta_info_alloc(struct i
- const u8 *addr, gfp_t gfp)
- {
- struct ieee80211_local *local = sdata->local;
-+ struct ieee80211_hw *hw = &local->hw;
- struct sta_info *sta;
- struct timespec uptime;
- int i;
-
-- sta = kzalloc(sizeof(*sta) + local->hw.sta_data_size, gfp);
-+ sta = kzalloc(sizeof(*sta) + hw->sta_data_size, gfp);
- if (!sta)
- return NULL;
-
-@@ -321,11 +334,25 @@ struct sta_info *sta_info_alloc(struct i
- for (i = 0; i < ARRAY_SIZE(sta->chain_signal_avg); i++)
- ewma_init(&sta->chain_signal_avg[i], 1024, 8);
-
-- if (sta_prepare_rate_control(local, sta, gfp)) {
-- kfree(sta);
-- return NULL;
-+ if (local->ops->wake_tx_queue) {
-+ void *txq_data;
-+ int size = sizeof(struct txq_info) +
-+ ALIGN(hw->txq_data_size, sizeof(void *));
-+
-+ txq_data = kcalloc(ARRAY_SIZE(sta->sta.txq), size, gfp);
-+ if (!txq_data)
-+ goto free;
-+
-+ for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
-+ struct txq_info *txq = txq_data + i * size;
-+
-+ ieee80211_init_tx_queue(sdata, sta, txq, i);
-+ }
- }
-
-+ if (sta_prepare_rate_control(local, sta, gfp))
-+ goto free_txq;
-+
- for (i = 0; i < IEEE80211_NUM_TIDS; i++) {
- /*
- * timer_to_tid must be initialized with identity mapping
-@@ -346,7 +373,7 @@ struct sta_info *sta_info_alloc(struct i
- if (sdata->vif.type == NL80211_IFTYPE_AP ||
- sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
- struct ieee80211_supported_band *sband =
-- local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)];
-+ hw->wiphy->bands[ieee80211_get_sdata_band(sdata)];
- u8 smps = (sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >>
- IEEE80211_HT_CAP_SM_PS_SHIFT;
- /*
-@@ -371,6 +398,13 @@ struct sta_info *sta_info_alloc(struct i
- sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr);
-
- return sta;
-+
-+free_txq:
-+ if (sta->sta.txq[0])
-+ kfree(to_txq_info(sta->sta.txq[0]));
-+free:
-+ kfree(sta);
-+ return NULL;
- }
-
- static int sta_info_insert_check(struct sta_info *sta)
-@@ -640,6 +674,8 @@ static void __sta_info_recalc_tim(struct
-
- indicate_tim |=
- sta->driver_buffered_tids & tids;
-+ indicate_tim |=
-+ sta->txq_buffered_tids & tids;
- }
-
- done:
-@@ -1071,7 +1107,7 @@ void ieee80211_sta_ps_deliver_wakeup(str
- struct ieee80211_sub_if_data *sdata = sta->sdata;
- struct ieee80211_local *local = sdata->local;
- struct sk_buff_head pending;
-- int filtered = 0, buffered = 0, ac;
-+ int filtered = 0, buffered = 0, ac, i;
- unsigned long flags;
- struct ps_data *ps;
-
-@@ -1090,10 +1126,22 @@ void ieee80211_sta_ps_deliver_wakeup(str
-
- BUILD_BUG_ON(BITS_TO_LONGS(IEEE80211_NUM_TIDS) > 1);
- sta->driver_buffered_tids = 0;
-+ sta->txq_buffered_tids = 0;
-
- if (!(local->hw.flags & IEEE80211_HW_AP_LINK_PS))
- drv_sta_notify(local, sdata, STA_NOTIFY_AWAKE, &sta->sta);
-
-+ if (sta->sta.txq[0]) {
-+ for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
-+ struct txq_info *txqi = to_txq_info(sta->sta.txq[i]);
-+
-+ if (!skb_queue_len(&txqi->queue))
-+ continue;
-+
-+ drv_wake_tx_queue(local, txqi);
-+ }
-+ }
-+
- skb_queue_head_init(&pending);
-
- /* sync with ieee80211_tx_h_unicast_ps_buf */
-@@ -1275,8 +1323,10 @@ ieee80211_sta_ps_deliver_response(struct
- /* if we already have frames from software, then we can't also
- * release from hardware queues
- */
-- if (skb_queue_empty(&frames))
-+ if (skb_queue_empty(&frames)) {
- driver_release_tids |= sta->driver_buffered_tids & tids;
-+ driver_release_tids |= sta->txq_buffered_tids & tids;
-+ }
-
- if (driver_release_tids) {
- /* If the driver has data on more than one TID then
-@@ -1447,6 +1497,9 @@ ieee80211_sta_ps_deliver_response(struct
-
- sta_info_recalc_tim(sta);
- } else {
-+ unsigned long tids = sta->txq_buffered_tids & driver_release_tids;
-+ int tid;
-+
- /*
- * We need to release a frame that is buffered somewhere in the
- * driver ... it'll have to handle that.
-@@ -1466,8 +1519,22 @@ ieee80211_sta_ps_deliver_response(struct
- * that the TID(s) became empty before returning here from the
- * release function.
- * Either way, however, when the driver tells us that the TID(s)
-- * became empty we'll do the TIM recalculation.
-+ * became empty or we find that a txq became empty, we'll do the
-+ * TIM recalculation.
- */
-+
-+ if (!sta->sta.txq[0])
-+ return;
-+
-+ for (tid = 0; tid < ARRAY_SIZE(sta->sta.txq); tid++) {
-+ struct txq_info *txqi = to_txq_info(sta->sta.txq[tid]);
-+
-+ if (!(tids & BIT(tid)) || skb_queue_len(&txqi->queue))
-+ continue;
-+
-+ sta_info_recalc_tim(sta);
-+ break;
-+ }
- }
- }
-
---- a/net/mac80211/sta_info.h
-+++ b/net/mac80211/sta_info.h
-@@ -274,6 +274,7 @@ struct sta_ampdu_mlme {
- * entered power saving state, these are also delivered to
- * the station when it leaves powersave or polls for frames
- * @driver_buffered_tids: bitmap of TIDs the driver has data buffered on
-+ * @txq_buffered_tids: bitmap of TIDs that mac80211 has txq data buffered on
- * @rx_packets: Number of MSDUs received from this STA
- * @rx_bytes: Number of bytes received from this STA
- * @last_rx: time (in jiffies) when last frame was received from this STA
-@@ -368,6 +369,7 @@ struct sta_info {
- struct sk_buff_head ps_tx_buf[IEEE80211_NUM_ACS];
- struct sk_buff_head tx_filtered[IEEE80211_NUM_ACS];
- unsigned long driver_buffered_tids;
-+ unsigned long txq_buffered_tids;
-
- /* Updated from RX path only, no locking requirements */
- unsigned long rx_packets;
---- a/net/mac80211/trace.h
-+++ b/net/mac80211/trace.h
-@@ -2312,6 +2312,37 @@ TRACE_EVENT(drv_tdls_recv_channel_switch
- )
- );
-
-+TRACE_EVENT(drv_wake_tx_queue,
-+ TP_PROTO(struct ieee80211_local *local,
-+ struct ieee80211_sub_if_data *sdata,
-+ struct txq_info *txq),
-+
-+ TP_ARGS(local, sdata, txq),
-+
-+ TP_STRUCT__entry(
-+ LOCAL_ENTRY
-+ VIF_ENTRY
-+ STA_ENTRY
-+ __field(u8, ac)
-+ __field(u8, tid)
-+ ),
-+
-+ TP_fast_assign(
-+ struct ieee80211_sta *sta = txq->txq.sta;
-+
-+ LOCAL_ASSIGN;
-+ VIF_ASSIGN;
-+ STA_ASSIGN;
-+ __entry->ac = txq->txq.ac;
-+ __entry->tid = txq->txq.tid;
-+ ),
-+
-+ TP_printk(
-+ LOCAL_PR_FMT VIF_PR_FMT STA_PR_FMT " ac:%d tid:%d",
-+ LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->ac, __entry->tid
-+ )
-+);
-+
- #ifdef CPTCFG_MAC80211_MESSAGE_TRACING
- #undef TRACE_SYSTEM
- #define TRACE_SYSTEM mac80211_msg
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -776,12 +776,22 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
- return TX_CONTINUE;
- }
-
-+static __le16 ieee80211_tx_next_seq(struct sta_info *sta, int tid)
-+{
-+ u16 *seq = &sta->tid_seq[tid];
-+ __le16 ret = cpu_to_le16(*seq);
-+
-+ /* Increase the sequence number. */
-+ *seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ;
-+
-+ return ret;
-+}
-+
- static ieee80211_tx_result debug_noinline
- ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx)
- {
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
-- u16 *seq;
- u8 *qc;
- int tid;
-
-@@ -832,13 +842,10 @@ ieee80211_tx_h_sequence(struct ieee80211
-
- qc = ieee80211_get_qos_ctl(hdr);
- tid = *qc & IEEE80211_QOS_CTL_TID_MASK;
-- seq = &tx->sta->tid_seq[tid];
- tx->sta->tx_msdu[tid]++;
-
-- hdr->seq_ctrl = cpu_to_le16(*seq);
--
-- /* Increase the sequence number. */
-- *seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ;
-+ if (!tx->sta->sta.txq[0])
-+ hdr->seq_ctrl = ieee80211_tx_next_seq(tx->sta, tid);
-
- return TX_CONTINUE;
- }
-@@ -1067,7 +1074,7 @@ static bool ieee80211_tx_prep_agg(struct
- * nothing -- this aggregation session is being started
- * but that might still fail with the driver
- */
-- } else {
-+ } else if (!tx->sta->sta.txq[tid]) {
- spin_lock(&tx->sta->lock);
- /*
- * Need to re-check now, because we may get here
-@@ -1201,13 +1208,102 @@ ieee80211_tx_prepare(struct ieee80211_su
- return TX_CONTINUE;
- }
-
-+static void ieee80211_drv_tx(struct ieee80211_local *local,
-+ struct ieee80211_vif *vif,
-+ struct ieee80211_sta *pubsta,
-+ struct sk_buff *skb)
-+{
-+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
-+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-+ struct ieee80211_tx_control control = {
-+ .sta = pubsta,
-+ };
-+ struct ieee80211_txq *txq = NULL;
-+ struct txq_info *txqi;
-+ u8 ac;
-+
-+ if (info->control.flags & IEEE80211_TX_CTRL_PS_RESPONSE)
-+ goto tx_normal;
-+
-+ if (!ieee80211_is_data(hdr->frame_control))
-+ goto tx_normal;
-+
-+ if (pubsta) {
-+ u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
-+
-+ txq = pubsta->txq[tid];
-+ } else if (vif) {
-+ txq = vif->txq;
-+ }
-+
-+ if (!txq)
-+ goto tx_normal;
-+
-+ ac = txq->ac;
-+ txqi = to_txq_info(txq);
-+ atomic_inc(&sdata->txqs_len[ac]);
-+ if (atomic_read(&sdata->txqs_len[ac]) >= local->hw.txq_ac_max_pending)
-+ netif_stop_subqueue(sdata->dev, ac);
-+
-+ skb_queue_tail(&txqi->queue, skb);
-+ drv_wake_tx_queue(local, txqi);
-+
-+ return;
-+
-+tx_normal:
-+ drv_tx(local, &control, skb);
-+}
-+
-+struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
-+ struct ieee80211_txq *txq)
-+{
-+ struct ieee80211_local *local = hw_to_local(hw);
-+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(txq->vif);
-+ struct txq_info *txqi = container_of(txq, struct txq_info, txq);
-+ struct ieee80211_hdr *hdr;
-+ struct sk_buff *skb = NULL;
-+ u8 ac = txq->ac;
-+
-+ spin_lock_bh(&txqi->queue.lock);
-+
-+ if (test_bit(IEEE80211_TXQ_STOP, &txqi->flags))
-+ goto out;
-+
-+ skb = __skb_dequeue(&txqi->queue);
-+ if (!skb)
-+ goto out;
-+
-+ atomic_dec(&sdata->txqs_len[ac]);
-+ if (__netif_subqueue_stopped(sdata->dev, ac))
-+ ieee80211_propagate_queue_wake(local, sdata->vif.hw_queue[ac]);
-+
-+ hdr = (struct ieee80211_hdr *)skb->data;
-+ if (txq->sta && ieee80211_is_data_qos(hdr->frame_control)) {
-+ struct sta_info *sta = container_of(txq->sta, struct sta_info,
-+ sta);
-+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-+
-+ hdr->seq_ctrl = ieee80211_tx_next_seq(sta, txq->tid);
-+ if (test_bit(IEEE80211_TXQ_AMPDU, &txqi->flags))
-+ info->flags |= IEEE80211_TX_CTL_AMPDU;
-+ else
-+ info->flags &= ~IEEE80211_TX_CTL_AMPDU;
-+ }
-+
-+out:
-+ spin_unlock_bh(&txqi->queue.lock);
-+
-+ return skb;
-+}
-+EXPORT_SYMBOL(ieee80211_tx_dequeue);
-+
- static bool ieee80211_tx_frags(struct ieee80211_local *local,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta,
- struct sk_buff_head *skbs,
- bool txpending)
- {
-- struct ieee80211_tx_control control;
- struct sk_buff *skb, *tmp;
- unsigned long flags;
-
-@@ -1265,10 +1361,9 @@ static bool ieee80211_tx_frags(struct ie
- spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
-
- info->control.vif = vif;
-- control.sta = sta;
-
- __skb_unlink(skb, skbs);
-- drv_tx(local, &control, skb);
-+ ieee80211_drv_tx(local, vif, sta, skb);
- }
-
- return true;
---- a/net/mac80211/util.c
-+++ b/net/mac80211/util.c
-@@ -308,6 +308,11 @@ void ieee80211_propagate_queue_wake(stru
- for (ac = 0; ac < n_acs; ac++) {
- int ac_queue = sdata->vif.hw_queue[ac];
-
-+ if (local->ops->wake_tx_queue &&
-+ (atomic_read(&sdata->txqs_len[ac]) >
-+ local->hw.txq_ac_max_pending))
-+ continue;
-+
- if (ac_queue == queue ||
- (sdata->vif.cab_queue == queue &&
- local->queue_stop_reasons[ac_queue] == 0 &&
-@@ -3307,3 +3312,20 @@ u8 *ieee80211_add_wmm_info_ie(u8 *buf, u
-
- return buf;
- }
-+
-+void ieee80211_init_tx_queue(struct ieee80211_sub_if_data *sdata,
-+ struct sta_info *sta,
-+ struct txq_info *txqi, int tid)
-+{
-+ skb_queue_head_init(&txqi->queue);
-+ txqi->txq.vif = &sdata->vif;
-+
-+ if (sta) {
-+ txqi->txq.sta = &sta->sta;
-+ sta->sta.txq[tid] = &txqi->txq;
-+ txqi->txq.ac = ieee802_1d_to_ac[tid & 7];
-+ } else {
-+ sdata->vif.txq = &txqi->txq;
-+ txqi->txq.ac = IEEE80211_AC_BE;
-+ }
-+}
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -1176,6 +1176,7 @@ static void sta_ps_start(struct sta_info
- struct ieee80211_sub_if_data *sdata = sta->sdata;
- struct ieee80211_local *local = sdata->local;
- struct ps_data *ps;
-+ int tid;
-
- if (sta->sdata->vif.type == NL80211_IFTYPE_AP ||
- sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
-@@ -1189,6 +1190,18 @@ static void sta_ps_start(struct sta_info
- drv_sta_notify(local, sdata, STA_NOTIFY_SLEEP, &sta->sta);
- ps_dbg(sdata, "STA %pM aid %d enters power save mode\n",
- sta->sta.addr, sta->sta.aid);
-+
-+ if (!sta->sta.txq[0])
-+ return;
-+
-+ for (tid = 0; tid < ARRAY_SIZE(sta->sta.txq); tid++) {
-+ struct txq_info *txqi = to_txq_info(sta->sta.txq[tid]);
-+
-+ if (!skb_queue_len(&txqi->queue))
-+ set_bit(tid, &sta->txq_buffered_tids);
-+ else
-+ clear_bit(tid, &sta->txq_buffered_tids);
-+ }
- }
-
- static void sta_ps_end(struct sta_info *sta)
---- a/net/mac80211/agg-tx.c
-+++ b/net/mac80211/agg-tx.c
-@@ -188,6 +188,43 @@ ieee80211_wake_queue_agg(struct ieee8021
- __release(agg_queue);
- }
-
-+static void
-+ieee80211_agg_stop_txq(struct sta_info *sta, int tid)
-+{
-+ struct ieee80211_txq *txq = sta->sta.txq[tid];
-+ struct txq_info *txqi;
-+
-+ if (!txq)
-+ return;
-+
-+ txqi = to_txq_info(txq);
-+
-+ /* Lock here to protect against further seqno updates on dequeue */
-+ spin_lock_bh(&txqi->queue.lock);
-+ set_bit(IEEE80211_TXQ_STOP, &txqi->flags);
-+ spin_unlock_bh(&txqi->queue.lock);
-+}
-+
-+static void
-+ieee80211_agg_start_txq(struct sta_info *sta, int tid, bool enable)
-+{
-+ struct ieee80211_txq *txq = sta->sta.txq[tid];
-+ struct txq_info *txqi;
-+
-+ if (!txq)
-+ return;
-+
-+ txqi = to_txq_info(txq);
-+
-+ if (enable)
-+ set_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
-+ else
-+ clear_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
-+
-+ clear_bit(IEEE80211_TXQ_STOP, &txqi->flags);
-+ drv_wake_tx_queue(sta->sdata->local, txqi);
-+}
-+
- /*
- * splice packets from the STA's pending to the local pending,
- * requires a call to ieee80211_agg_splice_finish later
-@@ -247,6 +284,7 @@ static void ieee80211_remove_tid_tx(stru
- ieee80211_assign_tid_tx(sta, tid, NULL);
-
- ieee80211_agg_splice_finish(sta->sdata, tid);
-+ ieee80211_agg_start_txq(sta, tid, false);
-
- kfree_rcu(tid_tx, rcu_head);
- }
-@@ -418,6 +456,8 @@ void ieee80211_tx_ba_session_handle_star
- */
- clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
-
-+ ieee80211_agg_stop_txq(sta, tid);
-+
- /*
- * Make sure no packets are being processed. This ensures that
- * we have a valid starting sequence number and that in-flight
-@@ -440,6 +480,8 @@ void ieee80211_tx_ba_session_handle_star
- ieee80211_agg_splice_finish(sdata, tid);
- spin_unlock_bh(&sta->lock);
-
-+ ieee80211_agg_start_txq(sta, tid, false);
-+
- kfree_rcu(tid_tx, rcu_head);
- return;
- }
-@@ -666,6 +708,8 @@ static void ieee80211_agg_tx_operational
- ieee80211_agg_splice_finish(sta->sdata, tid);
-
- spin_unlock_bh(&sta->lock);
-+
-+ ieee80211_agg_start_txq(sta, tid, true);
- }
-
- void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid)
--- /dev/null
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Sun, 21 Jun 2015 19:45:59 +0200
+Subject: [PATCH] ath9k_hw: fix device ID check for AR956x
+
+Because of the missing return, the macVersion value was being
+overwritten with an invalid register read
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/hw.c
++++ b/drivers/net/wireless/ath/ath9k/hw.c
+@@ -279,6 +279,7 @@ static void ath9k_hw_read_revisions(stru
+ return;
+ case AR9300_DEVID_QCA956X:
+ ah->hw_version.macVersion = AR_SREV_VERSION_9561;
++ return;
+ }
+
+ val = REG_READ(ah, AR_SREV) & AR_SREV_ID;
+++ /dev/null
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Wed, 11 Mar 2015 09:14:15 +0100
-Subject: [PATCH] mac80211: lock rate control
-
-Both minstrel (reported by Sven Eckelmann) and the iwlwifi rate
-control aren't properly taking concurrency into account. It's
-likely that the same is true for other rate control algorithms.
-
-In the case of minstrel this manifests itself in crashes when an
-update and other data access are run concurrently, for example
-when the stations change bandwidth or similar. In iwlwifi, this
-can cause firmware crashes.
-
-Since fixing all rate control algorithms will be very difficult,
-just provide locking for invocations. This protects the internal
-data structures the algorithms maintain.
-
-I've manipulated hostapd to test this, by having it change its
-advertised bandwidth roughly ever 150ms. At the same time, I'm
-running a flood ping between the client and the AP, which causes
-this race of update vs. get_rate/status to easily happen on the
-client. With this change, the system survives this test.
-
-Reported-by: Sven Eckelmann <sven@open-mesh.com>
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/rate.c
-+++ b/net/mac80211/rate.c
-@@ -683,7 +683,13 @@ void rate_control_get_rate(struct ieee80
- if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
- return;
-
-- ref->ops->get_rate(ref->priv, ista, priv_sta, txrc);
-+ if (ista) {
-+ spin_lock_bh(&sta->rate_ctrl_lock);
-+ ref->ops->get_rate(ref->priv, ista, priv_sta, txrc);
-+ spin_unlock_bh(&sta->rate_ctrl_lock);
-+ } else {
-+ ref->ops->get_rate(ref->priv, NULL, NULL, txrc);
-+ }
-
- if (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_RC_TABLE)
- return;
---- a/net/mac80211/rate.h
-+++ b/net/mac80211/rate.h
-@@ -42,10 +42,12 @@ static inline void rate_control_tx_statu
- if (!ref || !test_sta_flag(sta, WLAN_STA_RATE_CONTROL))
- return;
-
-+ spin_lock_bh(&sta->rate_ctrl_lock);
- if (ref->ops->tx_status)
- ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb);
- else
- ref->ops->tx_status_noskb(ref->priv, sband, ista, priv_sta, info);
-+ spin_unlock_bh(&sta->rate_ctrl_lock);
- }
-
- static inline void
-@@ -64,7 +66,9 @@ rate_control_tx_status_noskb(struct ieee
- if (WARN_ON_ONCE(!ref->ops->tx_status_noskb))
- return;
-
-+ spin_lock_bh(&sta->rate_ctrl_lock);
- ref->ops->tx_status_noskb(ref->priv, sband, ista, priv_sta, info);
-+ spin_unlock_bh(&sta->rate_ctrl_lock);
- }
-
- static inline void rate_control_rate_init(struct sta_info *sta)
-@@ -91,8 +95,10 @@ static inline void rate_control_rate_ini
-
- sband = local->hw.wiphy->bands[chanctx_conf->def.chan->band];
-
-+ spin_lock_bh(&sta->rate_ctrl_lock);
- ref->ops->rate_init(ref->priv, sband, &chanctx_conf->def, ista,
- priv_sta);
-+ spin_unlock_bh(&sta->rate_ctrl_lock);
- rcu_read_unlock();
- set_sta_flag(sta, WLAN_STA_RATE_CONTROL);
- }
-@@ -115,18 +121,20 @@ static inline void rate_control_rate_upd
- return;
- }
-
-+ spin_lock_bh(&sta->rate_ctrl_lock);
- ref->ops->rate_update(ref->priv, sband, &chanctx_conf->def,
- ista, priv_sta, changed);
-+ spin_unlock_bh(&sta->rate_ctrl_lock);
- rcu_read_unlock();
- }
- drv_sta_rc_update(local, sta->sdata, &sta->sta, changed);
- }
-
- static inline void *rate_control_alloc_sta(struct rate_control_ref *ref,
-- struct ieee80211_sta *sta,
-- gfp_t gfp)
-+ struct sta_info *sta, gfp_t gfp)
- {
-- return ref->ops->alloc_sta(ref->priv, sta, gfp);
-+ spin_lock_init(&sta->rate_ctrl_lock);
-+ return ref->ops->alloc_sta(ref->priv, &sta->sta, gfp);
- }
-
- static inline void rate_control_free_sta(struct sta_info *sta)
---- a/net/mac80211/sta_info.c
-+++ b/net/mac80211/sta_info.c
-@@ -286,7 +286,7 @@ static int sta_prepare_rate_control(stru
-
- sta->rate_ctrl = local->rate_ctrl;
- sta->rate_ctrl_priv = rate_control_alloc_sta(sta->rate_ctrl,
-- &sta->sta, gfp);
-+ sta, gfp);
- if (!sta->rate_ctrl_priv)
- return -ENOMEM;
-
---- a/net/mac80211/sta_info.h
-+++ b/net/mac80211/sta_info.h
-@@ -349,6 +349,7 @@ struct sta_info {
- u8 ptk_idx;
- struct rate_control_ref *rate_ctrl;
- void *rate_ctrl_priv;
-+ spinlock_t rate_ctrl_lock;
- spinlock_t lock;
-
- struct work_struct drv_deliver_wk;
--- /dev/null
+From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
+Date: Tue, 16 Jun 2015 10:34:03 +0200
+Subject: [PATCH] ath: DFS - limit number of potential PRI sequences
+
+In the PRI detector, after the current radar pulse
+has been checked agains existing PRI sequences, it
+is considered as part of a new potential sequence.
+
+Previously, the condition to accept a new sequence
+was to have at least the same number of pulses as
+the longest matching sequence. This was wrong,
+since it led to duplicates of PRI sequences.
+
+This patch changes the acceptance criteria for new
+potential sequences from 'at least' to 'more than'
+the longest existing.
+
+Detection performance remains unaffected, while
+the number of PRI sequences accounted at runtime
+(and with it CPU load) is reduced by up to 50%.
+
+Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
+---
+
+--- a/drivers/net/wireless/ath/dfs_pri_detector.c
++++ b/drivers/net/wireless/ath/dfs_pri_detector.c
+@@ -273,7 +273,7 @@ static bool pseq_handler_create_sequence
+ tmp_false_count++;
+ }
+ }
+- if (ps.count < min_count)
++ if (ps.count <= min_count)
+ /* did not reach minimum count, drop sequence */
+ continue;
+
+++ /dev/null
-From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
-Date: Tue, 10 Mar 2015 17:49:29 +0100
-Subject: [PATCH] ath9k: restart only triggering DFS detector line
-
-To support HT40 DFS mode, a triggering detector must
-reset only itself but not other detector lines.
-
-Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
----
-
---- a/drivers/net/wireless/ath/dfs_pattern_detector.c
-+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
-@@ -289,7 +289,7 @@ dpd_add_pulse(struct dfs_pattern_detecto
- "count=%d, count_false=%d\n",
- event->freq, pd->rs->type_id,
- ps->pri, ps->count, ps->count_falses);
-- channel_detector_reset(dpd, cd);
-+ pd->reset(pd, dpd->last_pulse_ts);
- return true;
- }
- }
--- /dev/null
+From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
+Date: Tue, 16 Jun 2015 11:46:42 +0200
+Subject: [PATCH] ath9k: DFS - consider ext_channel pulses only in HT40
+ mode
+
+The chip reports radar pulses on extension channel
+even if operating in HT20 mode. This patch adds a
+sanity check for HT40 mode before it feeds pulses
+on extension channel to the pattern detector.
+
+Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/dfs.c
++++ b/drivers/net/wireless/ath/ath9k/dfs.c
+@@ -198,7 +198,8 @@ void ath9k_dfs_process_phyerr(struct ath
+ sc->dfs_prev_pulse_ts = pe.ts;
+ if (ard.pulse_bw_info & PRI_CH_RADAR_FOUND)
+ ath9k_dfs_process_radar_pulse(sc, &pe);
+- if (ard.pulse_bw_info & EXT_CH_RADAR_FOUND) {
++ if (IS_CHAN_HT40(ah->curchan) &&
++ ard.pulse_bw_info & EXT_CH_RADAR_FOUND) {
+ pe.freq += IS_CHAN_HT40PLUS(ah->curchan) ? 20 : -20;
+ ath9k_dfs_process_radar_pulse(sc, &pe);
+ }
+++ /dev/null
-From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
-Date: Tue, 10 Mar 2015 17:49:30 +0100
-Subject: [PATCH] ath9k: add DFS support for extension channel
-
-In HT40 modes, pulse events on primary and extension
-channel are processed individually. If valid, a pulse
-event will be fed into the detector
-* for primary frequency, or
-* for extension frequency (+/-20MHz based on HT40-mode)
-* or both
-
-With that, a 40MHz radar will result in two individual
-radar events.
-
-Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/dfs.c
-+++ b/drivers/net/wireless/ath/ath9k/dfs.c
-@@ -126,8 +126,19 @@ ath9k_postprocess_radar_event(struct ath
- DFS_STAT_INC(sc, pulses_detected);
- return true;
- }
--#undef PRI_CH_RADAR_FOUND
--#undef EXT_CH_RADAR_FOUND
-+
-+static void
-+ath9k_dfs_process_radar_pulse(struct ath_softc *sc, struct pulse_event *pe)
-+{
-+ struct dfs_pattern_detector *pd = sc->dfs_detector;
-+ DFS_STAT_INC(sc, pulses_processed);
-+ if (pd == NULL)
-+ return;
-+ if (!pd->add_pulse(pd, pe))
-+ return;
-+ DFS_STAT_INC(sc, radar_detected);
-+ ieee80211_radar_detected(sc->hw);
-+}
-
- /*
- * DFS: check PHY-error for radar pulse and feed the detector
-@@ -176,18 +187,21 @@ void ath9k_dfs_process_phyerr(struct ath
- ard.pulse_length_pri = vdata_end[-3];
- pe.freq = ah->curchan->channel;
- pe.ts = mactime;
-- if (ath9k_postprocess_radar_event(sc, &ard, &pe)) {
-- struct dfs_pattern_detector *pd = sc->dfs_detector;
-- ath_dbg(common, DFS,
-- "ath9k_dfs_process_phyerr: channel=%d, ts=%llu, "
-- "width=%d, rssi=%d, delta_ts=%llu\n",
-- pe.freq, pe.ts, pe.width, pe.rssi,
-- pe.ts - sc->dfs_prev_pulse_ts);
-- sc->dfs_prev_pulse_ts = pe.ts;
-- DFS_STAT_INC(sc, pulses_processed);
-- if (pd != NULL && pd->add_pulse(pd, &pe)) {
-- DFS_STAT_INC(sc, radar_detected);
-- ieee80211_radar_detected(sc->hw);
-- }
-+ if (!ath9k_postprocess_radar_event(sc, &ard, &pe))
-+ return;
-+
-+ ath_dbg(common, DFS,
-+ "ath9k_dfs_process_phyerr: type=%d, freq=%d, ts=%llu, "
-+ "width=%d, rssi=%d, delta_ts=%llu\n",
-+ ard.pulse_bw_info, pe.freq, pe.ts, pe.width, pe.rssi,
-+ pe.ts - sc->dfs_prev_pulse_ts);
-+ sc->dfs_prev_pulse_ts = pe.ts;
-+ if (ard.pulse_bw_info & PRI_CH_RADAR_FOUND)
-+ ath9k_dfs_process_radar_pulse(sc, &pe);
-+ if (ard.pulse_bw_info & EXT_CH_RADAR_FOUND) {
-+ pe.freq += IS_CHAN_HT40PLUS(ah->curchan) ? 20 : -20;
-+ ath9k_dfs_process_radar_pulse(sc, &pe);
- }
- }
-+#undef PRI_CH_RADAR_FOUND
-+#undef EXT_CH_RADAR_FOUND
--- /dev/null
+From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
+Date: Tue, 16 Jun 2015 12:52:16 +0200
+Subject: [PATCH] ath9k: DFS - add pulse chirp detection for FCC
+
+FCC long pulse radar (type 5) requires pulses to be
+checked for chirping. This patch implements chirp
+detection based on the FFT data provided for long
+pulses.
+
+A chirp is detected when a set of criteria defined
+by FCC pulse characteristics is met, including
+* have at least 4 FFT samples
+* max_bin index moves equidistantly between samples
+* the gradient is within defined range
+
+The chirp detection has been tested with reference
+radar generating devices and proved to work reliably.
+
+Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/dfs.c
++++ b/drivers/net/wireless/ath/ath9k/dfs.c
+@@ -30,6 +30,157 @@ struct ath_radar_data {
+ u8 pulse_length_pri;
+ };
+
++/**** begin: CHIRP ************************************************************/
++
++/* min and max gradients for defined FCC chirping pulses, given by
++ * - 20MHz chirp width over a pulse width of 50us
++ * - 5MHz chirp width over a pulse width of 100us
++ */
++static const int BIN_DELTA_MIN = 1;
++static const int BIN_DELTA_MAX = 10;
++
++/* we need at least 3 deltas / 4 samples for a reliable chirp detection */
++#define NUM_DIFFS 3
++static const int FFT_NUM_SAMPLES = (NUM_DIFFS + 1);
++
++/* Threshold for difference of delta peaks */
++static const int MAX_DIFF = 2;
++
++/* width range to be checked for chirping */
++static const int MIN_CHIRP_PULSE_WIDTH = 20;
++static const int MAX_CHIRP_PULSE_WIDTH = 110;
++
++struct ath9k_dfs_fft_20 {
++ u8 bin[28];
++ u8 lower_bins[3];
++} __packed;
++struct ath9k_dfs_fft_40 {
++ u8 bin[64];
++ u8 lower_bins[3];
++ u8 upper_bins[3];
++} __packed;
++
++static inline int fft_max_index(u8 *bins)
++{
++ return (bins[2] & 0xfc) >> 2;
++}
++static inline int fft_max_magnitude(u8 *bins)
++{
++ return (bins[0] & 0xc0) >> 6 | bins[1] << 2 | (bins[2] & 0x03) << 10;
++}
++static inline u8 fft_bitmap_weight(u8 *bins)
++{
++ return bins[0] & 0x3f;
++}
++
++static int ath9k_get_max_index_ht40(struct ath9k_dfs_fft_40 *fft,
++ bool is_ctl, bool is_ext)
++{
++ const int DFS_UPPER_BIN_OFFSET = 64;
++ /* if detected radar on both channels, select the significant one */
++ if (is_ctl && is_ext) {
++ /* first check wether channels have 'strong' bins */
++ is_ctl = fft_bitmap_weight(fft->lower_bins) != 0;
++ is_ext = fft_bitmap_weight(fft->upper_bins) != 0;
++
++ /* if still unclear, take higher magnitude */
++ if (is_ctl && is_ext) {
++ int mag_lower = fft_max_magnitude(fft->lower_bins);
++ int mag_upper = fft_max_magnitude(fft->upper_bins);
++ if (mag_upper > mag_lower)
++ is_ctl = false;
++ else
++ is_ext = false;
++ }
++ }
++ if (is_ctl)
++ return fft_max_index(fft->lower_bins);
++ return fft_max_index(fft->upper_bins) + DFS_UPPER_BIN_OFFSET;
++}
++static bool ath9k_check_chirping(struct ath_softc *sc, u8 *data,
++ int datalen, bool is_ctl, bool is_ext)
++{
++ int i;
++ int max_bin[FFT_NUM_SAMPLES];
++ struct ath_hw *ah = sc->sc_ah;
++ struct ath_common *common = ath9k_hw_common(ah);
++ int prev_delta;
++
++ if (IS_CHAN_HT40(ah->curchan)) {
++ struct ath9k_dfs_fft_40 *fft = (struct ath9k_dfs_fft_40 *) data;
++ int num_fft_packets = datalen / sizeof(*fft);
++ if (num_fft_packets == 0)
++ return false;
++
++ ath_dbg(common, DFS, "HT40: datalen=%d, num_fft_packets=%d\n",
++ datalen, num_fft_packets);
++ if (num_fft_packets < (FFT_NUM_SAMPLES)) {
++ ath_dbg(common, DFS, "not enough packets for chirp\n");
++ return false;
++ }
++ /* HW sometimes adds 2 garbage bytes in front of FFT samples */
++ if ((datalen % sizeof(*fft)) == 2) {
++ fft = (struct ath9k_dfs_fft_40 *) (data + 2);
++ ath_dbg(common, DFS, "fixing datalen by 2\n");
++ }
++ if (IS_CHAN_HT40MINUS(ah->curchan)) {
++ int temp = is_ctl;
++ is_ctl = is_ext;
++ is_ext = temp;
++ }
++ for (i = 0; i < FFT_NUM_SAMPLES; i++)
++ max_bin[i] = ath9k_get_max_index_ht40(fft + i, is_ctl,
++ is_ext);
++ } else {
++ struct ath9k_dfs_fft_20 *fft = (struct ath9k_dfs_fft_20 *) data;
++ int num_fft_packets = datalen / sizeof(*fft);
++ if (num_fft_packets == 0)
++ return false;
++ ath_dbg(common, DFS, "HT20: datalen=%d, num_fft_packets=%d\n",
++ datalen, num_fft_packets);
++ if (num_fft_packets < (FFT_NUM_SAMPLES)) {
++ ath_dbg(common, DFS, "not enough packets for chirp\n");
++ return false;
++ }
++ /* in ht20, this is a 6-bit signed number => shift it to 0 */
++ for (i = 0; i < FFT_NUM_SAMPLES; i++)
++ max_bin[i] = fft_max_index(fft[i].lower_bins) ^ 0x20;
++ }
++ ath_dbg(common, DFS, "bin_max = [%d, %d, %d, %d]\n",
++ max_bin[0], max_bin[1], max_bin[2], max_bin[3]);
++
++ /* Check for chirp attributes within specs
++ * a) delta of adjacent max_bins is within range
++ * b) delta of adjacent deltas are within tolerance
++ */
++ prev_delta = 0;
++ for (i = 0; i < NUM_DIFFS; i++) {
++ int ddelta = -1;
++ int delta = max_bin[i + 1] - max_bin[i];
++
++ /* ensure gradient is within valid range */
++ if (abs(delta) < BIN_DELTA_MIN || abs(delta) > BIN_DELTA_MAX) {
++ ath_dbg(common, DFS, "CHIRP: invalid delta %d "
++ "in sample %d\n", delta, i);
++ return false;
++ }
++ if (i == 0)
++ goto done;
++ ddelta = delta - prev_delta;
++ if (abs(ddelta) > MAX_DIFF) {
++ ath_dbg(common, DFS, "CHIRP: ddelta %d too high\n",
++ ddelta);
++ return false;
++ }
++done:
++ ath_dbg(common, DFS, "CHIRP - %d: delta=%d, ddelta=%d\n",
++ i, delta, ddelta);
++ prev_delta = delta;
++ }
++ return true;
++}
++/**** end: CHIRP **************************************************************/
++
+ /* convert pulse duration to usecs, considering clock mode */
+ static u32 dur_to_usecs(struct ath_hw *ah, u32 dur)
+ {
+@@ -113,12 +264,6 @@ ath9k_postprocess_radar_event(struct ath
+ return false;
+ }
+
+- /*
+- * TODO: check chirping pulses
+- * checks for chirping are dependent on the DFS regulatory domain
+- * used, which is yet TBD
+- */
+-
+ /* convert duration to usecs */
+ pe->width = dur_to_usecs(sc->sc_ah, dur);
+ pe->rssi = rssi;
+@@ -190,6 +335,16 @@ void ath9k_dfs_process_phyerr(struct ath
+ if (!ath9k_postprocess_radar_event(sc, &ard, &pe))
+ return;
+
++ if (pe.width > MIN_CHIRP_PULSE_WIDTH &&
++ pe.width < MAX_CHIRP_PULSE_WIDTH) {
++ bool is_ctl = !!(ard.pulse_bw_info & PRI_CH_RADAR_FOUND);
++ bool is_ext = !!(ard.pulse_bw_info & EXT_CH_RADAR_FOUND);
++ int clen = datalen - 3;
++ pe.chirp = ath9k_check_chirping(sc, data, clen, is_ctl, is_ext);
++ } else {
++ pe.chirp = false;
++ }
++
+ ath_dbg(common, DFS,
+ "ath9k_dfs_process_phyerr: type=%d, freq=%d, ts=%llu, "
+ "width=%d, rssi=%d, delta_ts=%llu\n",
+++ /dev/null
-From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
-Date: Tue, 10 Mar 2015 17:49:31 +0100
-Subject: [PATCH] ath9k: allow 40MHz radar detection width
-
-Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -763,7 +763,8 @@ static const struct ieee80211_iface_comb
- .num_different_channels = 1,
- .beacon_int_infra_match = true,
- .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
-- BIT(NL80211_CHAN_WIDTH_20),
-+ BIT(NL80211_CHAN_WIDTH_20) |
-+ BIT(NL80211_CHAN_WIDTH_40),
- }
- #endif
- };
+++ /dev/null
-From: Sergey Ryazanov <ryazanov.s.a@gmail.com>
-Date: Wed, 4 Mar 2015 05:12:10 +0300
-Subject: [PATCH] ath5k: channel change fix
-
-ath5k updates the channel pointer and after that it stops the Rx logic
-and apply channel to HW. In case of channel switch, such sequence
-creates a small window when a frame, which is received on the old
-channel is considered as a frame received on the new one.
-
-The most notable consequence of this situation occurs during the switch
-from 2 GHz band (CCK+OFDM) to the 5GHz band (OFDM-only). Frame received
-with CCK rate, e.g. beacon received at the 1mbps, causes the following
-warning:
-
- WARNING: at ath5k/base.c:589 ath5k_tasklet_rx+0x318/0x6ec [ath5k]()
- invalid hw_rix: 1a
- [..]
- Call Trace:
- [<802656a8>] show_stack+0x48/0x70
- [<802dd92c>] warn_slowpath_common+0x88/0xbc
- [<802dd98c>] warn_slowpath_fmt+0x2c/0x38
- [<81b51be8>] ath5k_tasklet_rx+0x318/0x6ec [ath5k]
- [<8028ac64>] tasklet_action+0x8c/0xf0
- [<80075804>] __do_softirq+0x180/0x32c
- [<80196ce8>] irq_exit+0x54/0x70
- [<80041848>] ret_from_irq+0x0/0x4
- [<80182fdc>] ioread32+0x4/0xc
- [<81b4c42c>] ath5k_hw_set_sleep_clock+0x2ec/0x474 [ath5k]
- [<81b4cf28>] ath5k_hw_reset+0x50/0xeb8 [ath5k]
- [<81b50900>] ath5k_reset+0xd4/0x310 [ath5k]
- [<81b557e8>] ath5k_config+0x4c/0x104 [ath5k]
- [<80d01770>] ieee80211_hw_config+0x2f4/0x35c [mac80211]
- [<80d09aa8>] ieee80211_scan_work+0x2e4/0x414 [mac80211]
- [<8022c3f4>] process_one_work+0x28c/0x400
- [<802df8f8>] worker_thread+0x258/0x3c0
- [<801b5710>] kthread+0xe0/0xec
- [<800418a8>] ret_from_kernel_thread+0x14/0x1c
-
-The easiest way to reproduce this warning is to run scan with dualband
-NIC in noisy environments, when the channel 11 runs multiple APs. In my
-tests if the APs num >= 12, the warning appears in the first few
-seconds of scanning.
-
-In order to fix this, the Rx disable code moved to a higher level and
-placed before the channel pointer update. This is also makes the code a
-bit more symmetrical, since we disable and enable the Rx in the same
-function.
-
-In fact, at the pointer update time new frames should not appear,
-because interrupt generation at this point should already be disabled.
-The next patch should address this issue.
-
-CC: Jiri Slaby <jirislaby@gmail.com>
-CC: Nick Kossifidis <mickflemm@gmail.com>
-CC: Luis R. Rodriguez <mcgrof@do-not-panic.com>
-Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com>
-Tested-by: Christophe Prevotaux <cprevotaux@nltinc.com>
-Tested-by: Eric Bree <ebree@nltinc.com>
-Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
----
-
---- a/drivers/net/wireless/ath/ath5k/base.c
-+++ b/drivers/net/wireless/ath/ath5k/base.c
-@@ -2858,7 +2858,7 @@ ath5k_reset(struct ath5k_hw *ah, struct
- {
- struct ath_common *common = ath5k_hw_common(ah);
- int ret, ani_mode;
-- bool fast;
-+ bool fast = chan && modparam_fastchanswitch ? 1 : 0;
-
- ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "resetting\n");
-
-@@ -2876,11 +2876,29 @@ ath5k_reset(struct ath5k_hw *ah, struct
- * so we should also free any remaining
- * tx buffers */
- ath5k_drain_tx_buffs(ah);
-+
-+ /* Stop PCU */
-+ ath5k_hw_stop_rx_pcu(ah);
-+
-+ /* Stop DMA
-+ *
-+ * Note: If DMA didn't stop continue
-+ * since only a reset will fix it.
-+ */
-+ ret = ath5k_hw_dma_stop(ah);
-+
-+ /* RF Bus grant won't work if we have pending
-+ * frames
-+ */
-+ if (ret && fast) {
-+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
-+ "DMA didn't stop, falling back to normal reset\n");
-+ fast = false;
-+ }
-+
- if (chan)
- ah->curchan = chan;
-
-- fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0;
--
- ret = ath5k_hw_reset(ah, ah->opmode, ah->curchan, fast, skip_pcu);
- if (ret) {
- ATH5K_ERR(ah, "can't reset hardware (%d)\n", ret);
---- a/drivers/net/wireless/ath/ath5k/reset.c
-+++ b/drivers/net/wireless/ath/ath5k/reset.c
-@@ -1169,30 +1169,6 @@ ath5k_hw_reset(struct ath5k_hw *ah, enum
- if (ah->ah_version == AR5K_AR5212)
- ath5k_hw_set_sleep_clock(ah, false);
-
-- /*
-- * Stop PCU
-- */
-- ath5k_hw_stop_rx_pcu(ah);
--
-- /*
-- * Stop DMA
-- *
-- * Note: If DMA didn't stop continue
-- * since only a reset will fix it.
-- */
-- ret = ath5k_hw_dma_stop(ah);
--
-- /* RF Bus grant won't work if we have pending
-- * frames */
-- if (ret && fast) {
-- ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
-- "DMA didn't stop, falling back to normal reset\n");
-- fast = false;
-- /* Non fatal, just continue with
-- * normal reset */
-- ret = 0;
-- }
--
- mode = channel->hw_value;
- switch (mode) {
- case AR5K_MODE_11A:
--- /dev/null
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 2 Jul 2015 13:35:05 +0200
+Subject: [PATCH] ath9k: make DMA stop related messages debug-only
+
+A long time ago, ath9k had issues during reset where the DMA engine
+would stay active and could potentially corrupt memory.
+To debug those issues, the driver would print warnings whenever they
+occur.
+
+Nowadays, these issues are gone and the primary cause of these messages
+is if the MAC is stuck during reset or busy processing a long
+transmission. This is fairly harmless, yet these messages continue to
+worry users.
+
+To reduce the number of bogus bug reports, turn these messages into
+debug messages and count their occurence in the "reset" debugfs file.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/debug.c
++++ b/drivers/net/wireless/ath/ath9k/debug.c
+@@ -765,6 +765,8 @@ static int read_file_reset(struct seq_fi
+ [RESET_TYPE_BEACON_STUCK] = "Stuck Beacon",
+ [RESET_TYPE_MCI] = "MCI Reset",
+ [RESET_TYPE_CALIBRATION] = "Calibration error",
++ [RESET_TX_DMA_ERROR] = "Tx DMA stop error",
++ [RESET_RX_DMA_ERROR] = "Rx DMA stop error",
+ };
+ int i;
+
+--- a/drivers/net/wireless/ath/ath9k/debug.h
++++ b/drivers/net/wireless/ath/ath9k/debug.h
+@@ -50,6 +50,8 @@ enum ath_reset_type {
+ RESET_TYPE_BEACON_STUCK,
+ RESET_TYPE_MCI,
+ RESET_TYPE_CALIBRATION,
++ RESET_TX_DMA_ERROR,
++ RESET_RX_DMA_ERROR,
+ __RESET_TYPE_MAX
+ };
+
+--- a/drivers/net/wireless/ath/ath9k/recv.c
++++ b/drivers/net/wireless/ath/ath9k/recv.c
+@@ -491,10 +491,9 @@ bool ath_stoprecv(struct ath_softc *sc)
+
+ if (!(ah->ah_flags & AH_UNPLUGGED) &&
+ unlikely(!stopped)) {
+- ath_err(ath9k_hw_common(sc->sc_ah),
+- "Could not stop RX, we could be "
+- "confusing the DMA engine when we start RX up\n");
+- ATH_DBG_WARN_ON_ONCE(!stopped);
++ ath_dbg(ath9k_hw_common(sc->sc_ah), RESET,
++ "Failed to stop Rx DMA\n");
++ RESET_STAT_INC(sc, RESET_RX_DMA_ERROR);
+ }
+ return stopped && !reset;
+ }
+--- a/drivers/net/wireless/ath/ath9k/xmit.c
++++ b/drivers/net/wireless/ath/ath9k/xmit.c
+@@ -1883,8 +1883,11 @@ bool ath_drain_all_txq(struct ath_softc
+ npend |= BIT(i);
+ }
+
+- if (npend)
+- ath_err(common, "Failed to stop TX DMA, queues=0x%03x!\n", npend);
++ if (npend) {
++ RESET_STAT_INC(sc, RESET_TX_DMA_ERROR);
++ ath_dbg(common, RESET,
++ "Failed to stop TX DMA, queues=0x%03x!\n", npend);
++ }
+
+ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
+ if (!ATH_TXQ_SETUP(sc, i))
+++ /dev/null
-From: Sergey Ryazanov <ryazanov.s.a@gmail.com>
-Date: Wed, 4 Mar 2015 05:12:11 +0300
-Subject: [PATCH] ath5k: fix reset race
-
-To prepare for reset ath5k should finish all asynchronous tasks. At
-first, it disables the interrupt generation, then it waits for the
-interrupt handler and tasklets completion, and then proceeds to the HW
-configuration update. But it does not consider that the interrupt
-handler or tasklet re-enables the interrupt generation. And we fall in a
-situation when ath5k assumes that interrupts are disabled, but it is
-not.
-
-This can lead to different consequences, such as reception of the frame,
-when we do not expect it. Under certain circumstances, this can lead to
-the following warning:
-
- WARNING: at ath5k/base.c:589 ath5k_tasklet_rx+0x318/0x6ec [ath5k]()
- invalid hw_rix: 1a
- [..]
- Call Trace:
- [<802656a8>] show_stack+0x48/0x70
- [<802dd92c>] warn_slowpath_common+0x88/0xbc
- [<802dd98c>] warn_slowpath_fmt+0x2c/0x38
- [<81b51be8>] ath5k_tasklet_rx+0x318/0x6ec [ath5k]
- [<8028ac64>] tasklet_action+0x8c/0xf0
- [<80075804>] __do_softirq+0x180/0x32c
- [<80196ce8>] irq_exit+0x54/0x70
- [<80041848>] ret_from_irq+0x0/0x4
- [<80182fdc>] ioread32+0x4/0xc
- [<81b4c42c>] ath5k_hw_set_sleep_clock+0x2ec/0x474 [ath5k]
- [<81b4cf28>] ath5k_hw_reset+0x50/0xeb8 [ath5k]
- [<81b50900>] ath5k_reset+0xd4/0x310 [ath5k]
- [<81b557e8>] ath5k_config+0x4c/0x104 [ath5k]
- [<80d01770>] ieee80211_hw_config+0x2f4/0x35c [mac80211]
- [<80d09aa8>] ieee80211_scan_work+0x2e4/0x414 [mac80211]
- [<8022c3f4>] process_one_work+0x28c/0x400
- [<802df8f8>] worker_thread+0x258/0x3c0
- [<801b5710>] kthread+0xe0/0xec
- [<800418a8>] ret_from_kernel_thread+0x14/0x1c
-
-Fix this issue by adding a new status flag, which forbids to re-enable
-the interrupt generation until the HW configuration is completed.
-
-Note: previous patch, which reorders the Rx disable code helps to avoid
-the above warning, but not fixes the root cause of unexpected frame
-receiving.
-
-CC: Jiri Slaby <jirislaby@gmail.com>
-CC: Nick Kossifidis <mickflemm@gmail.com>
-CC: Luis R. Rodriguez <mcgrof@do-not-panic.com>
-Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com>
-Tested-by: Christophe Prevotaux <cprevotaux@nltinc.com>
-Tested-by: Eric Bree <ebree@nltinc.com>
-Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
----
-
---- a/drivers/net/wireless/ath/ath5k/ath5k.h
-+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
-@@ -1283,6 +1283,7 @@ struct ath5k_hw {
- #define ATH_STAT_PROMISC 1
- #define ATH_STAT_LEDSOFT 2 /* enable LED gpio status */
- #define ATH_STAT_STARTED 3 /* opened & irqs enabled */
-+#define ATH_STAT_RESET 4 /* hw reset */
-
- unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */
- unsigned int fif_filter_flags; /* Current FIF_* filter flags */
---- a/drivers/net/wireless/ath/ath5k/base.c
-+++ b/drivers/net/wireless/ath/ath5k/base.c
-@@ -1523,6 +1523,9 @@ ath5k_set_current_imask(struct ath5k_hw
- enum ath5k_int imask;
- unsigned long flags;
-
-+ if (test_bit(ATH_STAT_RESET, ah->status))
-+ return;
-+
- spin_lock_irqsave(&ah->irqlock, flags);
- imask = ah->imask;
- if (ah->rx_pending)
-@@ -2862,6 +2865,8 @@ ath5k_reset(struct ath5k_hw *ah, struct
-
- ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "resetting\n");
-
-+ __set_bit(ATH_STAT_RESET, ah->status);
-+
- ath5k_hw_set_imr(ah, 0);
- synchronize_irq(ah->irq);
- ath5k_stop_tasklets(ah);
-@@ -2952,6 +2957,8 @@ ath5k_reset(struct ath5k_hw *ah, struct
- */
- /* ath5k_chan_change(ah, c); */
-
-+ __clear_bit(ATH_STAT_RESET, ah->status);
-+
- ath5k_beacon_config(ah);
- /* intrs are enabled by ath5k_beacon_config */
-
--- /dev/null
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 2 Jul 2015 15:20:56 +0200
+Subject: [PATCH] ath9k: limit retries for powersave response frames
+
+In some cases, the channel might be busy enough that an ath9k AP's
+response to PS-Poll frames might be too slow and the station has already
+gone to sleep. To avoid wasting too much airtime on this, limit the
+number of retries on such frames and ensure that no sample rate gets
+used.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/xmit.c
++++ b/drivers/net/wireless/ath/ath9k/xmit.c
+@@ -147,10 +147,25 @@ static void ath_send_bar(struct ath_atx_
+ }
+
+ static void ath_set_rates(struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+- struct ath_buf *bf)
++ struct ath_buf *bf, bool ps)
+ {
++ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(bf->bf_mpdu);
++
++ if (ps) {
++ /* Clear the first rate to avoid using a sample rate for PS frames */
++ info->control.rates[0].idx = -1;
++ info->control.rates[0].count = 0;
++ }
++
+ ieee80211_get_tx_rates(vif, sta, bf->bf_mpdu, bf->rates,
+ ARRAY_SIZE(bf->rates));
++ if (!ps)
++ return;
++
++ if (bf->rates[0].count > 2)
++ bf->rates[0].count = 2;
++
++ bf->rates[1].idx = -1;
+ }
+
+ static void ath_txq_skb_done(struct ath_softc *sc, struct ath_txq *txq,
+@@ -1430,7 +1445,7 @@ ath_tx_form_burst(struct ath_softc *sc,
+ if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
+ break;
+
+- ath_set_rates(tid->an->vif, tid->an->sta, bf);
++ ath_set_rates(tid->an->vif, tid->an->sta, bf, false);
+ } while (1);
+ }
+
+@@ -1461,7 +1476,7 @@ static bool ath_tx_sched_aggr(struct ath
+ return false;
+ }
+
+- ath_set_rates(tid->an->vif, tid->an->sta, bf);
++ ath_set_rates(tid->an->vif, tid->an->sta, bf, false);
+ if (aggr)
+ last = ath_tx_form_aggr(sc, txq, tid, &bf_q, bf,
+ tid_q, &aggr_len);
+@@ -1653,7 +1668,7 @@ void ath9k_release_buffered_frames(struc
+
+ __skb_unlink(bf->bf_mpdu, tid_q);
+ list_add_tail(&bf->list, &bf_q);
+- ath_set_rates(tid->an->vif, tid->an->sta, bf);
++ ath_set_rates(tid->an->vif, tid->an->sta, bf, true);
+ if (bf_isampdu(bf)) {
+ ath_tx_addto_baw(sc, tid, bf);
+ bf->bf_state.bf_type &= ~BUF_AGGR;
+@@ -2318,7 +2333,7 @@ int ath_tx_start(struct ieee80211_hw *hw
+ struct ath_txq *txq = txctl->txq;
+ struct ath_atx_tid *tid = NULL;
+ struct ath_buf *bf;
+- bool queue, skip_uapsd = false, ps_resp;
++ bool queue, ps_resp;
+ int q, ret;
+
+ if (vif)
+@@ -2365,13 +2380,13 @@ int ath_tx_start(struct ieee80211_hw *hw
+ if (!txctl->an)
+ txctl->an = &avp->mcast_node;
+ queue = true;
+- skip_uapsd = true;
++ ps_resp = false;
+ }
+
+ if (txctl->an && queue)
+ tid = ath_get_skb_tid(sc, txctl->an, skb);
+
+- if (!skip_uapsd && ps_resp) {
++ if (ps_resp) {
+ ath_txq_unlock(sc, txq);
+ txq = sc->tx.uapsdq;
+ ath_txq_lock(sc, txq);
+@@ -2409,7 +2424,7 @@ int ath_tx_start(struct ieee80211_hw *hw
+ if (txctl->paprd)
+ bf->bf_state.bfs_paprd_timestamp = jiffies;
+
+- ath_set_rates(vif, sta, bf);
++ ath_set_rates(vif, sta, bf, ps_resp);
+ ath_tx_send_normal(sc, txq, tid, skb);
+
+ out:
+@@ -2448,7 +2463,7 @@ void ath_tx_cabq(struct ieee80211_hw *hw
+ break;
+
+ bf->bf_lastbf = bf;
+- ath_set_rates(vif, NULL, bf);
++ ath_set_rates(vif, NULL, bf, false);
+ ath_buf_set_rate(sc, bf, &info, fi->framelen, false);
+ duration += info.rates[0].PktDuration;
+ if (bf_tail)
+@@ -2968,7 +2983,7 @@ int ath9k_tx99_send(struct ath_softc *sc
+ return -EINVAL;
+ }
+
+- ath_set_rates(sc->tx99_vif, NULL, bf);
++ ath_set_rates(sc->tx99_vif, NULL, bf, false);
+
+ ath9k_hw_set_desc_link(sc->sc_ah, bf->bf_desc, bf->bf_daddr);
+ ath9k_hw_tx99_start(sc->sc_ah, txctl->txq->axq_qnum);
--- /dev/null
+From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
+Date: Fri, 3 Jul 2015 11:45:42 +0530
+Subject: [PATCH] ath10k: Delay device access after cold reset
+
+It is observed that during cold reset pcie access right
+after a write operation to SOC_GLOBAL_RESET_ADDRESS causes
+Data Bus Error and system hard lockup. The reason
+for bus error is that pcie needs some time to get
+back to stable state for any transaction during cold reset. Add
+delay of 20 msecs after write of SOC_GLOBAL_RESET_ADDRESS
+to fix this issue.
+
+Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/pci.c
++++ b/drivers/net/wireless/ath/ath10k/pci.c
+@@ -2602,7 +2602,6 @@ static int ath10k_pci_wait_for_target_in
+
+ static int ath10k_pci_cold_reset(struct ath10k *ar)
+ {
+- int i;
+ u32 val;
+
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cold reset\n");
+@@ -2618,23 +2617,18 @@ static int ath10k_pci_cold_reset(struct
+ val |= 1;
+ ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val);
+
+- for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) {
+- if (ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS) &
+- RTC_STATE_COLD_RESET_MASK)
+- break;
+- msleep(1);
+- }
++ /* After writing into SOC_GLOBAL_RESET to put device into
++ * reset and pulling out of reset pcie may not be stable
++ * for any immediate pcie register access and cause bus error,
++ * add delay before any pcie access request to fix this issue.
++ */
++ msleep(20);
+
+ /* Pull Target, including PCIe, out of RESET. */
+ val &= ~1;
+ ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val);
+
+- for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) {
+- if (!(ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS) &
+- RTC_STATE_COLD_RESET_MASK))
+- break;
+- msleep(1);
+- }
++ msleep(20);
+
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cold reset complete\n");
+
+++ /dev/null
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Thu, 12 Mar 2015 17:10:50 +0100
-Subject: [PATCH] ath9k: fix tracking of enabled AP beacons
-
-sc->nbcnvifs tracks assigned beacon slots, not enabled beacons.
-Therefore, it cannot be used to decide if cur_conf->enable_beacon (bool)
-should be updated, or if beacons have been enabled already.
-With the current code (depending on the order of calls), beacons often
-do not get enabled in an AP+STA setup.
-To fix tracking of enabled beacons, convert cur_conf->enable_beacon to a
-bitmask of enabled beacon slots.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/beacon.c
-+++ b/drivers/net/wireless/ath/ath9k/beacon.c
-@@ -219,12 +219,15 @@ void ath9k_beacon_remove_slot(struct ath
- struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- struct ath_vif *avp = (void *)vif->drv_priv;
- struct ath_buf *bf = avp->av_bcbuf;
-+ struct ath_beacon_config *cur_conf = &sc->cur_chan->beacon;
-
- ath_dbg(common, CONFIG, "Removing interface at beacon slot: %d\n",
- avp->av_bslot);
-
- tasklet_disable(&sc->bcon_tasklet);
-
-+ cur_conf->enable_beacon &= ~BIT(avp->av_bslot);
-+
- if (bf && bf->bf_mpdu) {
- struct sk_buff *skb = bf->bf_mpdu;
- dma_unmap_single(sc->dev, bf->bf_buf_addr,
-@@ -521,8 +524,7 @@ static bool ath9k_allow_beacon_config(st
- }
-
- if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
-- if ((vif->type != NL80211_IFTYPE_AP) ||
-- (sc->nbcnvifs > 1)) {
-+ if (vif->type != NL80211_IFTYPE_AP) {
- ath_dbg(common, CONFIG,
- "An AP interface is already present !\n");
- return false;
-@@ -616,12 +618,14 @@ void ath9k_beacon_config(struct ath_soft
- * enabling/disabling SWBA.
- */
- if (changed & BSS_CHANGED_BEACON_ENABLED) {
-- if (!bss_conf->enable_beacon &&
-- (sc->nbcnvifs <= 1)) {
-- cur_conf->enable_beacon = false;
-- } else if (bss_conf->enable_beacon) {
-- cur_conf->enable_beacon = true;
-- ath9k_cache_beacon_config(sc, ctx, bss_conf);
-+ bool enabled = cur_conf->enable_beacon;
-+
-+ if (!bss_conf->enable_beacon) {
-+ cur_conf->enable_beacon &= ~BIT(avp->av_bslot);
-+ } else {
-+ cur_conf->enable_beacon |= BIT(avp->av_bslot);
-+ if (!enabled)
-+ ath9k_cache_beacon_config(sc, ctx, bss_conf);
- }
- }
-
---- a/drivers/net/wireless/ath/ath9k/common.h
-+++ b/drivers/net/wireless/ath/ath9k/common.h
-@@ -54,7 +54,7 @@ struct ath_beacon_config {
- u16 dtim_period;
- u16 bmiss_timeout;
- u8 dtim_count;
-- bool enable_beacon;
-+ u8 enable_beacon;
- bool ibss_creator;
- u32 nexttbtt;
- u32 intval;
+++ /dev/null
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Fri, 13 Mar 2015 10:49:40 +0100
-Subject: [PATCH] mac80211: minstrel_ht: fix rounding issue in MCS duration
- calculation
-
-On very high MCS bitrates, the calculated duration of rates that are
-next to each other can be very imprecise, due to the small packet size
-used as reference (1200 bytes).
-This is most visible in VHT80 nss=2 MCS8/9, for which minstrel shows the
-same throughput when the probability is also the same. This leads to a
-bad rate selection for such rates.
-
-Fix this issue by introducing an average A-MPDU size factor into the
-calculation.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/net/mac80211/rc80211_minstrel_ht.c
-+++ b/net/mac80211/rc80211_minstrel_ht.c
-@@ -17,10 +17,11 @@
- #include "rc80211_minstrel.h"
- #include "rc80211_minstrel_ht.h"
-
-+#define AVG_AMPDU_SIZE 16
- #define AVG_PKT_SIZE 1200
-
- /* Number of bits for an average sized packet */
--#define MCS_NBITS (AVG_PKT_SIZE << 3)
-+#define MCS_NBITS ((AVG_PKT_SIZE * AVG_AMPDU_SIZE) << 3)
-
- /* Number of symbols for a packet with (bps) bits per symbol */
- #define MCS_NSYMS(bps) DIV_ROUND_UP(MCS_NBITS, (bps))
-@@ -33,7 +34,8 @@
- )
-
- /* Transmit duration for the raw data part of an average sized packet */
--#define MCS_DURATION(streams, sgi, bps) MCS_SYMBOL_TIME(sgi, MCS_NSYMS((streams) * (bps)))
-+#define MCS_DURATION(streams, sgi, bps) \
-+ (MCS_SYMBOL_TIME(sgi, MCS_NSYMS((streams) * (bps))) / AVG_AMPDU_SIZE)
-
- #define BW_20 0
- #define BW_40 1
+++ /dev/null
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sun, 15 Mar 2015 08:02:37 +0100
-Subject: [PATCH] ath9k: disable TPC support again (for now)
-
-TPC support has been observed to cause some tx power fluctuations on
-some devices with at least AR934x and AR938x chips.
-Disable it for now until the bugs have been found and fixed
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -424,7 +424,7 @@ static void ath9k_hw_init_defaults(struc
- ah->power_mode = ATH9K_PM_UNDEFINED;
- ah->htc_reset_init = true;
-
-- ah->tpc_enabled = true;
-+ ah->tpc_enabled = false;
-
- ah->ani_function = ATH9K_ANI_ALL;
- if (!AR_SREV_9300_20_OR_LATER(ah))
+++ /dev/null
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Tue, 24 Feb 2015 00:28:18 +0100
-Subject: [PATCH] mac80211: don't look up stations for multicast addresses
-
-Since multicast addresses don't exist as stations, don't attempt
-to look them up in the hashtable on TX.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1161,7 +1161,7 @@ ieee80211_tx_prepare(struct ieee80211_su
- tx->sdata->control_port_protocol == tx->skb->protocol) {
- tx->sta = sta_info_get_bss(sdata, hdr->addr1);
- }
-- if (!tx->sta)
-+ if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
- tx->sta = sta_info_get(sdata, hdr->addr1);
-
- if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) &&
+++ /dev/null
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 11:41:58 +0100
-Subject: [PATCH] mac80211: remove drop_unencrypted code
-
-This mechanism was historic, and only ever used by IBSS, which
-also doesn't need to have it as it properly manages station's
-802.1X PAE state (or, with WEP, always has a key.)
-
-Remove the mechanism to clean up the code.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/debugfs.c
-+++ b/net/mac80211/debugfs.c
-@@ -274,8 +274,6 @@ void debugfs_hw_add(struct ieee80211_loc
- #ifdef CPTCFG_MAC80211_DEBUG_COUNTERS
- DEBUGFS_STATS_ADD(tx_handlers_drop, local->tx_handlers_drop);
- DEBUGFS_STATS_ADD(tx_handlers_queued, local->tx_handlers_queued);
-- DEBUGFS_STATS_ADD(tx_handlers_drop_unencrypted,
-- local->tx_handlers_drop_unencrypted);
- DEBUGFS_STATS_ADD(tx_handlers_drop_fragment,
- local->tx_handlers_drop_fragment);
- DEBUGFS_STATS_ADD(tx_handlers_drop_wep,
---- a/net/mac80211/debugfs_netdev.c
-+++ b/net/mac80211/debugfs_netdev.c
-@@ -177,7 +177,6 @@ static ssize_t ieee80211_if_write_##name
- IEEE80211_IF_FILE_R(name)
-
- /* common attributes */
--IEEE80211_IF_FILE(drop_unencrypted, drop_unencrypted, DEC);
- IEEE80211_IF_FILE(rc_rateidx_mask_2ghz, rc_rateidx_mask[IEEE80211_BAND_2GHZ],
- HEX);
- IEEE80211_IF_FILE(rc_rateidx_mask_5ghz, rc_rateidx_mask[IEEE80211_BAND_5GHZ],
-@@ -562,7 +561,6 @@ IEEE80211_IF_FILE(dot11MeshAwakeWindowDu
-
- static void add_common_files(struct ieee80211_sub_if_data *sdata)
- {
-- DEBUGFS_ADD(drop_unencrypted);
- DEBUGFS_ADD(rc_rateidx_mask_2ghz);
- DEBUGFS_ADD(rc_rateidx_mask_5ghz);
- DEBUGFS_ADD(rc_rateidx_mcs_mask_2ghz);
---- a/net/mac80211/ibss.c
-+++ b/net/mac80211/ibss.c
-@@ -249,8 +249,6 @@ static void __ieee80211_sta_join_ibss(st
- if (presp)
- kfree_rcu(presp, rcu_head);
-
-- sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
--
- /* make a copy of the chandef, it could be modified below. */
- chandef = *req_chandef;
- chan = chandef.chan;
-@@ -1289,8 +1287,6 @@ static void ieee80211_sta_create_ibss(st
-
- if (ifibss->privacy)
- capability |= WLAN_CAPABILITY_PRIVACY;
-- else
-- sdata->drop_unencrypted = 0;
-
- __ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int,
- &ifibss->chandef, ifibss->basic_rates,
---- a/net/mac80211/ieee80211_i.h
-+++ b/net/mac80211/ieee80211_i.h
-@@ -842,8 +842,6 @@ struct ieee80211_sub_if_data {
-
- unsigned long state;
-
-- int drop_unencrypted;
--
- char name[IFNAMSIZ];
-
- /* Fragment table for host-based reassembly */
-@@ -1289,7 +1287,6 @@ struct ieee80211_local {
- /* TX/RX handler statistics */
- unsigned int tx_handlers_drop;
- unsigned int tx_handlers_queued;
-- unsigned int tx_handlers_drop_unencrypted;
- unsigned int tx_handlers_drop_fragment;
- unsigned int tx_handlers_drop_wep;
- unsigned int tx_handlers_drop_not_assoc;
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -1535,7 +1535,6 @@ int ieee80211_if_change_type(struct ieee
- }
-
- /* reset some values that shouldn't be kept across type changes */
-- sdata->drop_unencrypted = 0;
- if (type == NL80211_IFTYPE_STATION)
- sdata->u.mgd.use_4addr = false;
-
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -1897,8 +1897,7 @@ static int ieee80211_drop_unencrypted(st
- /* Drop unencrypted frames if key is set. */
- if (unlikely(!ieee80211_has_protected(fc) &&
- !ieee80211_is_nullfunc(fc) &&
-- ieee80211_is_data(fc) &&
-- (rx->key || rx->sdata->drop_unencrypted)))
-+ ieee80211_is_data(fc) && rx->key))
- return -EACCES;
-
- return 0;
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -594,23 +594,8 @@ ieee80211_tx_h_select_key(struct ieee802
- else if (!is_multicast_ether_addr(hdr->addr1) &&
- (key = rcu_dereference(tx->sdata->default_unicast_key)))
- tx->key = key;
-- else if (info->flags & IEEE80211_TX_CTL_INJECTED)
-+ else
- tx->key = NULL;
-- else if (!tx->sdata->drop_unencrypted)
-- tx->key = NULL;
-- else if (tx->skb->protocol == tx->sdata->control_port_protocol)
-- tx->key = NULL;
-- else if (ieee80211_is_robust_mgmt_frame(tx->skb) &&
-- !(ieee80211_is_action(hdr->frame_control) &&
-- tx->sta && test_sta_flag(tx->sta, WLAN_STA_MFP)))
-- tx->key = NULL;
-- else if (ieee80211_is_mgmt(hdr->frame_control) &&
-- !ieee80211_is_robust_mgmt_frame(tx->skb))
-- tx->key = NULL;
-- else {
-- I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted);
-- return TX_DROP;
-- }
-
- if (tx->key) {
- bool skip_hw = false;
+++ /dev/null
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 16:24:21 +0100
-Subject: [PATCH] mac80211: don't look up destination station twice
-
-There's no need to look up the destination station twice while
-building the 802.11 header for a given frame if the frame will
-actually be transmitted to the station we initially looked up.
-
-This happens for 4-addr VLAN interfaces and TDLS connections, which
-both directly send the frame to the station they looked up, though
-in the case of TDLS some station conditions need to be checked.
-
-To avoid that, add a variable indicating that we've looked up the
-station that the frame is going to be transmitted to, and avoid the
-lookup/flag checking if it already has been done.
-
-In the TDLS case, also move the authorized/wme_sta flag assignment
-to the correct place, i.e. only when that station is really used.
-Before this change, the new lookup should always have succeeded so
-that the potentially erroneous data would be overwritten.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1894,6 +1894,7 @@ static struct sk_buff *ieee80211_build_h
- bool wme_sta = false, authorized = false, tdls_auth = false;
- bool tdls_peer = false, tdls_setup_frame = false;
- bool multicast;
-+ bool have_station = false;
- u16 info_id = 0;
- struct ieee80211_chanctx_conf *chanctx_conf;
- struct ieee80211_sub_if_data *ap_sdata;
-@@ -1918,6 +1919,7 @@ static struct sk_buff *ieee80211_build_h
- hdrlen = 30;
- authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- wme_sta = sta->sta.wme;
-+ have_station = true;
- }
- ap_sdata = container_of(sdata->bss, struct ieee80211_sub_if_data,
- u.ap);
-@@ -2034,9 +2036,6 @@ static struct sk_buff *ieee80211_build_h
- if (sdata->wdev.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) {
- sta = sta_info_get(sdata, skb->data);
- if (sta) {
-- authorized = test_sta_flag(sta,
-- WLAN_STA_AUTHORIZED);
-- wme_sta = sta->sta.wme;
- tdls_peer = test_sta_flag(sta,
- WLAN_STA_TDLS_PEER);
- tdls_auth = test_sta_flag(sta,
-@@ -2068,6 +2067,9 @@ static struct sk_buff *ieee80211_build_h
- memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
- memcpy(hdr.addr3, sdata->u.mgd.bssid, ETH_ALEN);
- hdrlen = 24;
-+ have_station = true;
-+ authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
-+ wme_sta = sta->sta.wme;
- } else if (sdata->u.mgd.use_4addr &&
- cpu_to_be16(ethertype) != sdata->control_port_protocol) {
- fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS |
-@@ -2130,7 +2132,7 @@ static struct sk_buff *ieee80211_build_h
- * in AP mode)
- */
- multicast = is_multicast_ether_addr(hdr.addr1);
-- if (!multicast) {
-+ if (!multicast && !have_station) {
- sta = sta_info_get(sdata, hdr.addr1);
- if (sta) {
- authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
+++ /dev/null
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 16:24:22 +0100
-Subject: [PATCH] mac80211: drop 4-addr VLAN frames earlier if not
- connected
-
-If there's no station on the 4-addr VLAN interface, then frames
-cannot be transmitted. Drop such frames earlier, before setting
-up all the information for them.
-
-We should keep the old check though since that code might be used
-for other internally-generated frames.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1920,6 +1920,9 @@ static struct sk_buff *ieee80211_build_h
- authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- wme_sta = sta->sta.wme;
- have_station = true;
-+ } else if (sdata->wdev.use_4addr) {
-+ ret = -ENOLINK;
-+ goto free;
- }
- ap_sdata = container_of(sdata->bss, struct ieee80211_sub_if_data,
- u.ap);
+++ /dev/null
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 16:24:23 +0100
-Subject: [PATCH] mac80211: mesh: avoid pointless station lookup
-
-In ieee80211_build_hdr(), the station is looked up to build the
-header correctly (QoS field) and to check for authorization. For
-mesh, authorization isn't checked here, and QoS capability is
-mandatory, so the station lookup can be avoided.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -2130,12 +2130,14 @@ static struct sk_buff *ieee80211_build_h
- }
-
- /*
-- * There's no need to try to look up the destination
-- * if it is a multicast address (which can only happen
-- * in AP mode)
-+ * There's no need to try to look up the destination station
-+ * if it is a multicast address. In mesh, there's no need to
-+ * look up the station at all as it always must be QoS capable
-+ * and mesh mode checks authorization later.
- */
- multicast = is_multicast_ether_addr(hdr.addr1);
-- if (!multicast && !have_station) {
-+ if (!multicast && !have_station &&
-+ !ieee80211_vif_is_mesh(&sdata->vif)) {
- sta = sta_info_get(sdata, hdr.addr1);
- if (sta) {
- authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
+++ /dev/null
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Fri, 20 Mar 2015 14:18:27 +0100
-Subject: [PATCH] mac80211: avoid duplicate TX path station lookup
-
-Instead of looking up the destination station twice in the TX path
-(first to build the header, and then for control processing), save
-it when building the header and use it later in the TX path.
-
-To avoid having to look up the station in the many callers, allow
-those to pass %NULL which keeps the existing lookup.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/cfg.c
-+++ b/net/mac80211/cfg.c
-@@ -3565,7 +3565,7 @@ static int ieee80211_probe_client(struct
- nullfunc->qos_ctrl = cpu_to_le16(7);
-
- local_bh_disable();
-- ieee80211_xmit(sdata, skb);
-+ ieee80211_xmit(sdata, sta, skb);
- local_bh_enable();
- rcu_read_unlock();
-
---- a/net/mac80211/ieee80211_i.h
-+++ b/net/mac80211/ieee80211_i.h
-@@ -1775,7 +1775,8 @@ void mac80211_ev_michael_mic_failure(str
- gfp_t gfp);
- void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata,
- bool bss_notify);
--void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb);
-+void ieee80211_xmit(struct ieee80211_sub_if_data *sdata,
-+ struct sta_info *sta, struct sk_buff *skb);
-
- void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata,
- struct sk_buff *skb, int tid,
---- a/net/mac80211/sta_info.c
-+++ b/net/mac80211/sta_info.c
-@@ -1279,7 +1279,7 @@ static void ieee80211_send_null_response
- }
-
- info->band = chanctx_conf->def.chan->band;
-- ieee80211_xmit(sdata, skb);
-+ ieee80211_xmit(sdata, sta, skb);
- rcu_read_unlock();
- }
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1110,11 +1110,13 @@ static bool ieee80211_tx_prep_agg(struct
-
- /*
- * initialises @tx
-+ * pass %NULL for the station if unknown, a valid pointer if known
-+ * or an ERR_PTR() if the station is known not to exist
- */
- static ieee80211_tx_result
- ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_tx_data *tx,
-- struct sk_buff *skb)
-+ struct sta_info *sta, struct sk_buff *skb)
- {
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_hdr *hdr;
-@@ -1137,17 +1139,22 @@ ieee80211_tx_prepare(struct ieee80211_su
-
- hdr = (struct ieee80211_hdr *) skb->data;
-
-- if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
-- tx->sta = rcu_dereference(sdata->u.vlan.sta);
-- if (!tx->sta && sdata->dev->ieee80211_ptr->use_4addr)
-- return TX_DROP;
-- } else if (info->flags & (IEEE80211_TX_CTL_INJECTED |
-- IEEE80211_TX_INTFL_NL80211_FRAME_TX) ||
-- tx->sdata->control_port_protocol == tx->skb->protocol) {
-- tx->sta = sta_info_get_bss(sdata, hdr->addr1);
-+ if (likely(sta)) {
-+ if (!IS_ERR(sta))
-+ tx->sta = sta;
-+ } else {
-+ if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
-+ tx->sta = rcu_dereference(sdata->u.vlan.sta);
-+ if (!tx->sta && sdata->wdev.use_4addr)
-+ return TX_DROP;
-+ } else if (info->flags & (IEEE80211_TX_INTFL_NL80211_FRAME_TX |
-+ IEEE80211_TX_CTL_INJECTED) ||
-+ tx->sdata->control_port_protocol == tx->skb->protocol) {
-+ tx->sta = sta_info_get_bss(sdata, hdr->addr1);
-+ }
-+ if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
-+ tx->sta = sta_info_get(sdata, hdr->addr1);
- }
-- if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
-- tx->sta = sta_info_get(sdata, hdr->addr1);
-
- if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) &&
- !ieee80211_is_qos_nullfunc(hdr->frame_control) &&
-@@ -1485,7 +1492,7 @@ bool ieee80211_tx_prepare_skb(struct iee
- struct ieee80211_tx_data tx;
- struct sk_buff *skb2;
-
-- if (ieee80211_tx_prepare(sdata, &tx, skb) == TX_DROP)
-+ if (ieee80211_tx_prepare(sdata, &tx, NULL, skb) == TX_DROP)
- return false;
-
- info->band = band;
-@@ -1518,7 +1525,8 @@ EXPORT_SYMBOL(ieee80211_tx_prepare_skb);
- * Returns false if the frame couldn't be transmitted but was queued instead.
- */
- static bool ieee80211_tx(struct ieee80211_sub_if_data *sdata,
-- struct sk_buff *skb, bool txpending)
-+ struct sta_info *sta, struct sk_buff *skb,
-+ bool txpending)
- {
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_tx_data tx;
-@@ -1534,7 +1542,7 @@ static bool ieee80211_tx(struct ieee8021
-
- /* initialises tx */
- led_len = skb->len;
-- res_prepare = ieee80211_tx_prepare(sdata, &tx, skb);
-+ res_prepare = ieee80211_tx_prepare(sdata, &tx, sta, skb);
-
- if (unlikely(res_prepare == TX_DROP)) {
- ieee80211_free_txskb(&local->hw, skb);
-@@ -1590,7 +1598,8 @@ static int ieee80211_skb_resize(struct i
- return 0;
- }
-
--void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
-+void ieee80211_xmit(struct ieee80211_sub_if_data *sdata,
-+ struct sta_info *sta, struct sk_buff *skb)
- {
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-@@ -1625,7 +1634,7 @@ void ieee80211_xmit(struct ieee80211_sub
- }
-
- ieee80211_set_qos_hdr(sdata, skb);
-- ieee80211_tx(sdata, skb, false);
-+ ieee80211_tx(sdata, sta, skb, false);
- }
-
- static bool ieee80211_parse_tx_radiotap(struct sk_buff *skb)
-@@ -1846,7 +1855,7 @@ netdev_tx_t ieee80211_monitor_start_xmit
- goto fail_rcu;
-
- info->band = chandef->chan->band;
-- ieee80211_xmit(sdata, skb);
-+ ieee80211_xmit(sdata, NULL, skb);
- rcu_read_unlock();
-
- return NETDEV_TX_OK;
-@@ -1877,7 +1886,8 @@ fail:
- * Returns: the (possibly reallocated) skb or an ERR_PTR() code
- */
- static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata,
-- struct sk_buff *skb, u32 info_flags)
-+ struct sk_buff *skb, u32 info_flags,
-+ struct sta_info **sta_out)
- {
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_tx_info *info;
-@@ -1920,6 +1930,7 @@ static struct sk_buff *ieee80211_build_h
- authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- wme_sta = sta->sta.wme;
- have_station = true;
-+ *sta_out = sta;
- } else if (sdata->wdev.use_4addr) {
- ret = -ENOLINK;
- goto free;
-@@ -2073,6 +2084,7 @@ static struct sk_buff *ieee80211_build_h
- have_station = true;
- authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- wme_sta = sta->sta.wme;
-+ *sta_out = sta;
- } else if (sdata->u.mgd.use_4addr &&
- cpu_to_be16(ethertype) != sdata->control_port_protocol) {
- fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS |
-@@ -2136,13 +2148,18 @@ static struct sk_buff *ieee80211_build_h
- * and mesh mode checks authorization later.
- */
- multicast = is_multicast_ether_addr(hdr.addr1);
-- if (!multicast && !have_station &&
-- !ieee80211_vif_is_mesh(&sdata->vif)) {
-- sta = sta_info_get(sdata, hdr.addr1);
-+ if (multicast) {
-+ *sta_out = ERR_PTR(-ENOENT);
-+ } else if (!have_station && !ieee80211_vif_is_mesh(&sdata->vif)) {
-+ if (sdata->control_port_protocol == skb->protocol)
-+ sta = sta_info_get_bss(sdata, hdr.addr1);
-+ else
-+ sta = sta_info_get(sdata, hdr.addr1);
- if (sta) {
- authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
- wme_sta = sta->sta.wme;
- }
-+ *sta_out = sta ?: ERR_PTR(-ENOENT);
- }
-
- /* For mesh, the use of the QoS header is mandatory */
-@@ -2320,6 +2337,7 @@ void __ieee80211_subif_start_xmit(struct
- u32 info_flags)
- {
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-+ struct sta_info *sta = NULL;
-
- if (unlikely(skb->len < ETH_HLEN)) {
- kfree_skb(skb);
-@@ -2328,7 +2346,7 @@ void __ieee80211_subif_start_xmit(struct
-
- rcu_read_lock();
-
-- skb = ieee80211_build_hdr(sdata, skb, info_flags);
-+ skb = ieee80211_build_hdr(sdata, skb, info_flags, &sta);
- if (IS_ERR(skb))
- goto out;
-
-@@ -2336,7 +2354,7 @@ void __ieee80211_subif_start_xmit(struct
- dev->stats.tx_bytes += skb->len;
- dev->trans_start = jiffies;
-
-- ieee80211_xmit(sdata, skb);
-+ ieee80211_xmit(sdata, sta, skb);
- out:
- rcu_read_unlock();
- }
-@@ -2364,10 +2382,11 @@ ieee80211_build_data_template(struct iee
- .local = sdata->local,
- .sdata = sdata,
- };
-+ struct sta_info *sta_ignore;
-
- rcu_read_lock();
-
-- skb = ieee80211_build_hdr(sdata, skb, info_flags);
-+ skb = ieee80211_build_hdr(sdata, skb, info_flags, &sta_ignore);
- if (IS_ERR(skb))
- goto out;
-
-@@ -2425,7 +2444,7 @@ static bool ieee80211_tx_pending_skb(str
- return true;
- }
- info->band = chanctx_conf->def.chan->band;
-- result = ieee80211_tx(sdata, skb, true);
-+ result = ieee80211_tx(sdata, NULL, skb, true);
- } else {
- struct sk_buff_head skbs;
-
-@@ -3163,7 +3182,7 @@ ieee80211_get_buffered_bc(struct ieee802
-
- if (sdata->vif.type == NL80211_IFTYPE_AP)
- sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
-- if (!ieee80211_tx_prepare(sdata, &tx, skb))
-+ if (!ieee80211_tx_prepare(sdata, &tx, NULL, skb))
- break;
- dev_kfree_skb_any(skb);
- }
-@@ -3295,6 +3314,6 @@ void __ieee80211_tx_skb_tid_band(struct
- */
- local_bh_disable();
- IEEE80211_SKB_CB(skb)->band = band;
-- ieee80211_xmit(sdata, skb);
-+ ieee80211_xmit(sdata, NULL, skb);
- local_bh_enable();
- }
+++ /dev/null
-From: John Linville <linville@tuxdriver.com>
-Date: Tue, 31 Mar 2015 10:49:14 -0400
-Subject: [PATCH] mac80211: reduce log spam from ieee80211_handle_pwr_constr
-
-This changes a couple of messages from sdata_info to sdata_dbg.
-This should reduce some log spam, as reported here:
-
- https://bugzilla.redhat.com/show_bug.cgi?id=1206468
-
-Signed-off-by: John W. Linville <linville@tuxdriver.com>
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/mlme.c
-+++ b/net/mac80211/mlme.c
-@@ -1347,15 +1347,15 @@ static u32 ieee80211_handle_pwr_constr(s
- */
- if (has_80211h_pwr &&
- (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
-- sdata_info(sdata,
-- "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
-- pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
-- sdata->u.mgd.bssid);
-+ sdata_dbg(sdata,
-+ "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
-+ pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
-+ sdata->u.mgd.bssid);
- new_ap_level = pwr_level_80211h;
- } else { /* has_cisco_pwr is always true here. */
-- sdata_info(sdata,
-- "Limiting TX power to %d dBm as advertised by %pM\n",
-- pwr_level_cisco, sdata->u.mgd.bssid);
-+ sdata_dbg(sdata,
-+ "Limiting TX power to %d dBm as advertised by %pM\n",
-+ pwr_level_cisco, sdata->u.mgd.bssid);
- new_ap_level = pwr_level_cisco;
- }
-
+++ /dev/null
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:41 +0100
-Subject: [PATCH] brcmfmac: Fix race condition in msgbuf ioctl processing.
-
-Msgbuf is using a wait_event_timeout to wait for the response on
-an ioctl. The wakeup routine uses waitqueue_active to see if
-wait_event_timeout has been called. There is a chance that the
-response arrives before wait_event_timeout is called, this
-will result in situation that wait_event_timeout never gets
-woken again and assumed result will be a timeout. This patch
-removes that errornous situation by always setting the
-ctl_completed var before checking for queue active.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -481,10 +481,9 @@ static int brcmf_msgbuf_ioctl_resp_wait(
-
- static void brcmf_msgbuf_ioctl_resp_wake(struct brcmf_msgbuf *msgbuf)
- {
-- if (waitqueue_active(&msgbuf->ioctl_resp_wait)) {
-- msgbuf->ctl_completed = true;
-+ msgbuf->ctl_completed = true;
-+ if (waitqueue_active(&msgbuf->ioctl_resp_wait))
- wake_up(&msgbuf->ioctl_resp_wait);
-- }
- }
-
-
+++ /dev/null
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:23 +0100
-Subject: [PATCH] brcmfmac: Update msgbuf commonring size for improved
- throughput.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h
-@@ -17,11 +17,11 @@
-
- #ifdef CPTCFG_BRCMFMAC_PROTO_MSGBUF
-
--#define BRCMF_H2D_MSGRING_CONTROL_SUBMIT_MAX_ITEM 20
--#define BRCMF_H2D_MSGRING_RXPOST_SUBMIT_MAX_ITEM 256
--#define BRCMF_D2H_MSGRING_CONTROL_COMPLETE_MAX_ITEM 20
-+#define BRCMF_H2D_MSGRING_CONTROL_SUBMIT_MAX_ITEM 64
-+#define BRCMF_H2D_MSGRING_RXPOST_SUBMIT_MAX_ITEM 512
-+#define BRCMF_D2H_MSGRING_CONTROL_COMPLETE_MAX_ITEM 64
- #define BRCMF_D2H_MSGRING_TX_COMPLETE_MAX_ITEM 1024
--#define BRCMF_D2H_MSGRING_RX_COMPLETE_MAX_ITEM 256
-+#define BRCMF_D2H_MSGRING_RX_COMPLETE_MAX_ITEM 512
- #define BRCMF_H2D_TXFLOWRING_MAX_ITEM 512
-
- #define BRCMF_H2D_MSGRING_CONTROL_SUBMIT_ITEMSIZE 40
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:46 +0100
-Subject: [PATCH] ath9k_htc: add new WMI_REG_RMW_CMDID command
-
-Since usb bus add extra delay on each request, a command
-with read + write requests is too expensive. We can dramtically
-reduce usb load by moving this command to firmware.
-
-In my tests, this patch will reduce channel scan time
-for about 5-10 seconds.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath.h
-+++ b/drivers/net/wireless/ath/ath.h
-@@ -131,6 +131,9 @@ struct ath_ops {
- void (*enable_write_buffer)(void *);
- void (*write_flush) (void *);
- u32 (*rmw)(void *, u32 reg_offset, u32 set, u32 clr);
-+ void (*enable_rmw_buffer)(void *);
-+ void (*rmw_flush) (void *);
-+
- };
-
- struct ath_common;
---- a/drivers/net/wireless/ath/ath9k/htc.h
-+++ b/drivers/net/wireless/ath/ath9k/htc.h
-@@ -444,6 +444,10 @@ static inline void ath9k_htc_stop_btcoex
- #define OP_BT_SCAN BIT(4)
- #define OP_TSF_RESET BIT(6)
-
-+enum htc_op_flags {
-+ HTC_FWFLAG_NO_RMW,
-+};
-+
- struct ath9k_htc_priv {
- struct device *dev;
- struct ieee80211_hw *hw;
-@@ -482,6 +486,7 @@ struct ath9k_htc_priv {
- bool reconfig_beacon;
- unsigned int rxfilter;
- unsigned long op_flags;
-+ unsigned long fw_flags;
-
- struct ath9k_hw_cal_data caldata;
- struct ath_spec_scan_priv spec_priv;
---- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
-+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
-@@ -376,17 +376,139 @@ static void ath9k_regwrite_flush(void *h
- mutex_unlock(&priv->wmi->multi_write_mutex);
- }
-
--static u32 ath9k_reg_rmw(void *hw_priv, u32 reg_offset, u32 set, u32 clr)
-+static void ath9k_reg_rmw_buffer(void *hw_priv,
-+ u32 reg_offset, u32 set, u32 clr)
-+{
-+ struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+ struct ath_common *common = ath9k_hw_common(ah);
-+ struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+ u32 rsp_status;
-+ int r;
-+
-+ mutex_lock(&priv->wmi->multi_rmw_mutex);
-+
-+ /* Store the register/value */
-+ priv->wmi->multi_rmw[priv->wmi->multi_rmw_idx].reg =
-+ cpu_to_be32(reg_offset);
-+ priv->wmi->multi_rmw[priv->wmi->multi_rmw_idx].set =
-+ cpu_to_be32(set);
-+ priv->wmi->multi_rmw[priv->wmi->multi_rmw_idx].clr =
-+ cpu_to_be32(clr);
-+
-+ priv->wmi->multi_rmw_idx++;
-+
-+ /* If the buffer is full, send it out. */
-+ if (priv->wmi->multi_rmw_idx == MAX_RMW_CMD_NUMBER) {
-+ r = ath9k_wmi_cmd(priv->wmi, WMI_REG_RMW_CMDID,
-+ (u8 *) &priv->wmi->multi_rmw,
-+ sizeof(struct register_write) * priv->wmi->multi_rmw_idx,
-+ (u8 *) &rsp_status, sizeof(rsp_status),
-+ 100);
-+ if (unlikely(r)) {
-+ ath_dbg(common, WMI,
-+ "REGISTER RMW FAILED, multi len: %d\n",
-+ priv->wmi->multi_rmw_idx);
-+ }
-+ priv->wmi->multi_rmw_idx = 0;
-+ }
-+
-+ mutex_unlock(&priv->wmi->multi_rmw_mutex);
-+}
-+
-+static void ath9k_reg_rmw_flush(void *hw_priv)
- {
-- u32 val;
-+ struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+ struct ath_common *common = ath9k_hw_common(ah);
-+ struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+ u32 rsp_status;
-+ int r;
-+
-+ if (test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags))
-+ return;
-+
-+ atomic_dec(&priv->wmi->m_rmw_cnt);
-+
-+ mutex_lock(&priv->wmi->multi_rmw_mutex);
-+
-+ if (priv->wmi->multi_rmw_idx) {
-+ r = ath9k_wmi_cmd(priv->wmi, WMI_REG_RMW_CMDID,
-+ (u8 *) &priv->wmi->multi_rmw,
-+ sizeof(struct register_rmw) * priv->wmi->multi_rmw_idx,
-+ (u8 *) &rsp_status, sizeof(rsp_status),
-+ 100);
-+ if (unlikely(r)) {
-+ ath_dbg(common, WMI,
-+ "REGISTER RMW FAILED, multi len: %d\n",
-+ priv->wmi->multi_rmw_idx);
-+ }
-+ priv->wmi->multi_rmw_idx = 0;
-+ }
-
-- val = ath9k_regread(hw_priv, reg_offset);
-- val &= ~clr;
-- val |= set;
-- ath9k_regwrite(hw_priv, val, reg_offset);
-+ mutex_unlock(&priv->wmi->multi_rmw_mutex);
-+}
-+
-+static void ath9k_enable_rmw_buffer(void *hw_priv)
-+{
-+ struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+ struct ath_common *common = ath9k_hw_common(ah);
-+ struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+
-+ if (test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags))
-+ return;
-+
-+ atomic_inc(&priv->wmi->m_rmw_cnt);
-+}
-+
-+static u32 ath9k_reg_rmw_single(void *hw_priv,
-+ u32 reg_offset, u32 set, u32 clr)
-+{
-+ struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+ struct ath_common *common = ath9k_hw_common(ah);
-+ struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+ struct register_rmw buf, buf_ret;
-+ int ret;
-+ u32 val = 0;
-+
-+ buf.reg = cpu_to_be32(reg_offset);
-+ buf.set = cpu_to_be32(set);
-+ buf.clr = cpu_to_be32(clr);
-+
-+ ret = ath9k_wmi_cmd(priv->wmi, WMI_REG_RMW_CMDID,
-+ (u8 *) &buf, sizeof(buf),
-+ (u8 *) &buf_ret, sizeof(buf_ret),
-+ 100);
-+ if (unlikely(ret)) {
-+ ath_dbg(common, WMI, "REGISTER RMW FAILED:(0x%04x, %d)\n",
-+ reg_offset, ret);
-+ }
- return val;
- }
-
-+static u32 ath9k_reg_rmw(void *hw_priv, u32 reg_offset, u32 set, u32 clr)
-+{
-+ struct ath_hw *ah = (struct ath_hw *) hw_priv;
-+ struct ath_common *common = ath9k_hw_common(ah);
-+ struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-+
-+ if (test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags)) {
-+ u32 val;
-+
-+ val = REG_READ(ah, reg_offset);
-+ val &= ~clr;
-+ val |= set;
-+ REG_WRITE(ah, reg_offset, val);
-+
-+ return 0;
-+ }
-+
-+ if (atomic_read(&priv->wmi->m_rmw_cnt))
-+ ath9k_reg_rmw_buffer(hw_priv, reg_offset, set, clr);
-+ else
-+ ath9k_reg_rmw_single(hw_priv, reg_offset, set, clr);
-+
-+ return 0;
-+}
-+
- static void ath_usb_read_cachesize(struct ath_common *common, int *csz)
- {
- *csz = L1_CACHE_BYTES >> 2;
-@@ -501,6 +623,8 @@ static int ath9k_init_priv(struct ath9k_
- ah->reg_ops.write = ath9k_regwrite;
- ah->reg_ops.enable_write_buffer = ath9k_enable_regwrite_buffer;
- ah->reg_ops.write_flush = ath9k_regwrite_flush;
-+ ah->reg_ops.enable_rmw_buffer = ath9k_enable_rmw_buffer;
-+ ah->reg_ops.rmw_flush = ath9k_reg_rmw_flush;
- ah->reg_ops.rmw = ath9k_reg_rmw;
- priv->ah = ah;
-
-@@ -686,6 +810,12 @@ static int ath9k_init_firmware_version(s
- return -EINVAL;
- }
-
-+ if (priv->fw_version_major == 1 && priv->fw_version_minor < 4)
-+ set_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags);
-+
-+ dev_info(priv->dev, "FW RMW support: %s\n",
-+ test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags) ? "Off" : "On");
-+
- return 0;
- }
-
---- a/drivers/net/wireless/ath/ath9k/hw.h
-+++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -100,6 +100,18 @@
- (_ah)->reg_ops.write_flush((_ah)); \
- } while (0)
-
-+#define ENABLE_REG_RMW_BUFFER(_ah) \
-+ do { \
-+ if ((_ah)->reg_ops.enable_rmw_buffer) \
-+ (_ah)->reg_ops.enable_rmw_buffer((_ah)); \
-+ } while (0)
-+
-+#define REG_RMW_BUFFER_FLUSH(_ah) \
-+ do { \
-+ if ((_ah)->reg_ops.rmw_flush) \
-+ (_ah)->reg_ops.rmw_flush((_ah)); \
-+ } while (0)
-+
- #define PR_EEP(_s, _val) \
- do { \
- len += scnprintf(buf + len, size - len, "%20s : %10d\n",\
---- a/drivers/net/wireless/ath/ath9k/wmi.c
-+++ b/drivers/net/wireless/ath/ath9k/wmi.c
-@@ -61,6 +61,8 @@ static const char *wmi_cmd_to_name(enum
- return "WMI_REG_READ_CMDID";
- case WMI_REG_WRITE_CMDID:
- return "WMI_REG_WRITE_CMDID";
-+ case WMI_REG_RMW_CMDID:
-+ return "WMI_REG_RMW_CMDID";
- case WMI_RC_STATE_CHANGE_CMDID:
- return "WMI_RC_STATE_CHANGE_CMDID";
- case WMI_RC_RATE_UPDATE_CMDID:
-@@ -101,6 +103,7 @@ struct wmi *ath9k_init_wmi(struct ath9k_
- spin_lock_init(&wmi->event_lock);
- mutex_init(&wmi->op_mutex);
- mutex_init(&wmi->multi_write_mutex);
-+ mutex_init(&wmi->multi_rmw_mutex);
- init_completion(&wmi->cmd_wait);
- INIT_LIST_HEAD(&wmi->pending_tx_events);
- tasklet_init(&wmi->wmi_event_tasklet, ath9k_wmi_event_tasklet,
---- a/drivers/net/wireless/ath/ath9k/wmi.h
-+++ b/drivers/net/wireless/ath/ath9k/wmi.h
-@@ -112,6 +112,7 @@ enum wmi_cmd_id {
- WMI_TX_STATS_CMDID,
- WMI_RX_STATS_CMDID,
- WMI_BITRATE_MASK_CMDID,
-+ WMI_REG_RMW_CMDID,
- };
-
- enum wmi_event_id {
-@@ -125,12 +126,19 @@ enum wmi_event_id {
- };
-
- #define MAX_CMD_NUMBER 62
-+#define MAX_RMW_CMD_NUMBER 15
-
- struct register_write {
- __be32 reg;
- __be32 val;
- };
-
-+struct register_rmw {
-+ __be32 reg;
-+ __be32 set;
-+ __be32 clr;
-+} __packed;
-+
- struct ath9k_htc_tx_event {
- int count;
- struct __wmi_event_txstatus txs;
-@@ -156,10 +164,18 @@ struct wmi {
-
- spinlock_t wmi_lock;
-
-+ /* multi write section */
- atomic_t mwrite_cnt;
- struct register_write multi_write[MAX_CMD_NUMBER];
- u32 multi_write_idx;
- struct mutex multi_write_mutex;
-+
-+ /* multi rmw section */
-+ atomic_t m_rmw_cnt;
-+ struct register_rmw multi_rmw[MAX_RMW_CMD_NUMBER];
-+ u32 multi_rmw_idx;
-+ struct mutex multi_rmw_mutex;
-+
- };
-
- struct wmi *ath9k_init_wmi(struct ath9k_htc_priv *priv);
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:47 +0100
-Subject: [PATCH] ath9k: ar9271_hw_pa_cal - use defs instead of magin
- numbers
-
-This function uses mixed styles for register names/numbers which
-is make harder reading and optimisation.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -430,22 +430,22 @@ static void ar9271_hw_pa_cal(struct ath_
- u32 regVal;
- unsigned int i;
- u32 regList[][2] = {
-- { 0x786c, 0 },
-- { 0x7854, 0 },
-- { 0x7820, 0 },
-- { 0x7824, 0 },
-- { 0x7868, 0 },
-- { 0x783c, 0 },
-- { 0x7838, 0 } ,
-- { 0x7828, 0 } ,
-+ { AR9285_AN_TOP3, 0 },
-+ { AR9285_AN_RXTXBB1, 0 },
-+ { AR9285_AN_RF2G1, 0 },
-+ { AR9285_AN_RF2G2, 0 },
-+ { AR9285_AN_TOP2, 0 },
-+ { AR9285_AN_RF2G8, 0 },
-+ { AR9285_AN_RF2G7, 0 } ,
-+ { AR9285_AN_RF2G3, 0 } ,
- };
-
- for (i = 0; i < ARRAY_SIZE(regList); i++)
- regList[i][1] = REG_READ(ah, regList[i][0]);
-
-- regVal = REG_READ(ah, 0x7834);
-+ regVal = REG_READ(ah, AR9285_AN_RF2G6);
- regVal &= (~(0x1));
-- REG_WRITE(ah, 0x7834, regVal);
-+ REG_WRITE(ah, AR9285_AN_RF2G6, regVal);
- regVal = REG_READ(ah, 0x9808);
- regVal |= (0x1 << 27);
- REG_WRITE(ah, 0x9808, regVal);
-@@ -477,7 +477,7 @@ static void ar9271_hw_pa_cal(struct ath_
- * does not matter since we turn it off
- */
- REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PADRVGN2TAB0, 0);
--
-+ /* 7828, b0-11, ccom=fff */
- REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9271_AN_RF2G3_CCOMP, 0xfff);
-
- /* Set:
-@@ -490,15 +490,16 @@ static void ar9271_hw_pa_cal(struct ath_
-
- /* find off_6_1; */
- for (i = 6; i > 0; i--) {
-- regVal = REG_READ(ah, 0x7834);
-+ regVal = REG_READ(ah, AR9285_AN_RF2G6);
- regVal |= (1 << (20 + i));
-- REG_WRITE(ah, 0x7834, regVal);
-+ REG_WRITE(ah, AR9285_AN_RF2G6, regVal);
- udelay(1);
- /* regVal = REG_READ(ah, 0x7834); */
- regVal &= (~(0x1 << (20 + i)));
-- regVal |= (MS(REG_READ(ah, 0x7840), AR9285_AN_RXTXBB1_SPARE9)
-+ regVal |= (MS(REG_READ(ah, AR9285_AN_RF2G9),
-+ AR9285_AN_RXTXBB1_SPARE9)
- << (20 + i));
-- REG_WRITE(ah, 0x7834, regVal);
-+ REG_WRITE(ah, AR9285_AN_RF2G6, regVal);
- }
-
- regVal = (regVal >> 20) & 0x7f;
-@@ -517,9 +518,9 @@ static void ar9271_hw_pa_cal(struct ath_
-
- ENABLE_REGWRITE_BUFFER(ah);
-
-- regVal = REG_READ(ah, 0x7834);
-+ regVal = REG_READ(ah, AR_AN_RF2G1_CH1);
- regVal |= 0x1;
-- REG_WRITE(ah, 0x7834, regVal);
-+ REG_WRITE(ah, AR_AN_RF2G1_CH1, regVal);
- regVal = REG_READ(ah, 0x9808);
- regVal &= (~(0x1 << 27));
- REG_WRITE(ah, 0x9808, regVal);
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:48 +0100
-Subject: [PATCH] ath9k: ar9271_hw_pa_cal: use proper makroses.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -443,33 +443,30 @@ static void ar9271_hw_pa_cal(struct ath_
- for (i = 0; i < ARRAY_SIZE(regList); i++)
- regList[i][1] = REG_READ(ah, regList[i][0]);
-
-- regVal = REG_READ(ah, AR9285_AN_RF2G6);
-- regVal &= (~(0x1));
-- REG_WRITE(ah, AR9285_AN_RF2G6, regVal);
-- regVal = REG_READ(ah, 0x9808);
-- regVal |= (0x1 << 27);
-- REG_WRITE(ah, 0x9808, regVal);
--
-+ /* 7834, b1=0 */
-+ REG_CLR_BIT(ah, AR9285_AN_RF2G6, 1 << 0);
-+ /* 9808, b27=1 */
-+ REG_SET_BIT(ah, 0x9808, 1 << 27);
- /* 786c,b23,1, pwddac=1 */
-- REG_RMW_FIELD(ah, AR9285_AN_TOP3, AR9285_AN_TOP3_PWDDAC, 1);
-+ REG_SET_BIT(ah, AR9285_AN_TOP3, AR9285_AN_TOP3_PWDDAC);
- /* 7854, b5,1, pdrxtxbb=1 */
-- REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDRXTXBB1, 1);
-+ REG_SET_BIT(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDRXTXBB1);
- /* 7854, b7,1, pdv2i=1 */
-- REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDV2I, 1);
-+ REG_SET_BIT(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDV2I);
- /* 7854, b8,1, pddacinterface=1 */
-- REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDDACIF, 1);
-+ REG_SET_BIT(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDDACIF);
- /* 7824,b12,0, offcal=0 */
-- REG_RMW_FIELD(ah, AR9285_AN_RF2G2, AR9285_AN_RF2G2_OFFCAL, 0);
-+ REG_CLR_BIT(ah, AR9285_AN_RF2G2, AR9285_AN_RF2G2_OFFCAL);
- /* 7838, b1,0, pwddb=0 */
-- REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PWDDB, 0);
-+ REG_CLR_BIT(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PWDDB);
- /* 7820,b11,0, enpacal=0 */
-- REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_ENPACAL, 0);
-+ REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_ENPACAL);
- /* 7820,b25,1, pdpadrv1=0 */
-- REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV1, 0);
-+ REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV1);
- /* 7820,b24,0, pdpadrv2=0 */
-- REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV2, 0);
-+ REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV2);
- /* 7820,b23,0, pdpaout=0 */
-- REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPAOUT, 0);
-+ REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPAOUT);
- /* 783c,b14-16,7, padrvgn2tab_0=7 */
- REG_RMW_FIELD(ah, AR9285_AN_RF2G8, AR9285_AN_RF2G8_PADRVGN2TAB0, 7);
- /*
-@@ -516,15 +513,13 @@ static void ar9271_hw_pa_cal(struct ath_
- ah->pacal_info.prev_offset = regVal;
- }
-
-- ENABLE_REGWRITE_BUFFER(ah);
-
-- regVal = REG_READ(ah, AR_AN_RF2G1_CH1);
-- regVal |= 0x1;
-- REG_WRITE(ah, AR_AN_RF2G1_CH1, regVal);
-- regVal = REG_READ(ah, 0x9808);
-- regVal &= (~(0x1 << 27));
-- REG_WRITE(ah, 0x9808, regVal);
-+ /* 7834, b1=1 */
-+ REG_SET_BIT(ah, AR9285_AN_RF2G6, 1 << 0);
-+ /* 9808, b27=0 */
-+ REG_CLR_BIT(ah, 0x9808, 1 << 27);
-
-+ ENABLE_REGWRITE_BUFFER(ah);
- for (i = 0; i < ARRAY_SIZE(regList); i++)
- REG_WRITE(ah, regList[i][0], regList[i][1]);
-
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:49 +0100
-Subject: [PATCH] ath9k: ar9271_hw_pa_cal: use RMW buffer
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -436,13 +436,14 @@ static void ar9271_hw_pa_cal(struct ath_
- { AR9285_AN_RF2G2, 0 },
- { AR9285_AN_TOP2, 0 },
- { AR9285_AN_RF2G8, 0 },
-- { AR9285_AN_RF2G7, 0 } ,
-- { AR9285_AN_RF2G3, 0 } ,
-+ { AR9285_AN_RF2G7, 0 },
-+ { AR9285_AN_RF2G3, 0 },
- };
-
- for (i = 0; i < ARRAY_SIZE(regList); i++)
- regList[i][1] = REG_READ(ah, regList[i][0]);
-
-+ ENABLE_REG_RMW_BUFFER(ah);
- /* 7834, b1=0 */
- REG_CLR_BIT(ah, AR9285_AN_RF2G6, 1 << 0);
- /* 9808, b27=1 */
-@@ -476,6 +477,7 @@ static void ar9271_hw_pa_cal(struct ath_
- REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PADRVGN2TAB0, 0);
- /* 7828, b0-11, ccom=fff */
- REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9271_AN_RF2G3_CCOMP, 0xfff);
-+ REG_RMW_BUFFER_FLUSH(ah);
-
- /* Set:
- * localmode=1,bmode=1,bmoderxtx=1,synthon=1,
-@@ -514,10 +516,12 @@ static void ar9271_hw_pa_cal(struct ath_
- }
-
-
-+ ENABLE_REG_RMW_BUFFER(ah);
- /* 7834, b1=1 */
- REG_SET_BIT(ah, AR9285_AN_RF2G6, 1 << 0);
- /* 9808, b27=0 */
- REG_CLR_BIT(ah, 0x9808, 1 << 27);
-+ REG_RMW_BUFFER_FLUSH(ah);
-
- ENABLE_REGWRITE_BUFFER(ah);
- for (i = 0; i < ARRAY_SIZE(regList); i++)
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:50 +0100
-Subject: [PATCH] ath9k: add multi_read to be compatible with ath9k_htc
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -141,6 +141,16 @@ static unsigned int ath9k_ioread32(void
- return val;
- }
-
-+static void ath9k_multi_ioread32(void *hw_priv, u32 *addr,
-+ u32 *val, u16 count)
-+{
-+ int i;
-+
-+ for (i = 0; i < count; i++)
-+ val[i] = ath9k_ioread32(hw_priv, addr[i]);
-+}
-+
-+
- static unsigned int __ath9k_reg_rmw(struct ath_softc *sc, u32 reg_offset,
- u32 set, u32 clr)
- {
-@@ -530,6 +540,7 @@ static int ath9k_init_softc(u16 devid, s
- ah->hw = sc->hw;
- ah->hw_version.devid = devid;
- ah->reg_ops.read = ath9k_ioread32;
-+ ah->reg_ops.multi_read = ath9k_multi_ioread32;
- ah->reg_ops.write = ath9k_iowrite32;
- ah->reg_ops.rmw = ath9k_reg_rmw;
- pCap = &ah->caps;
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:51 +0100
-Subject: [PATCH] ath9k: add new function ath9k_hw_read_array
-
-REG_READ generate most overhead on usb bus. It send and read micro packages
-and reduce usb bandwidth. To reduce this overhead we should read in batches.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -121,6 +121,36 @@ void ath9k_hw_write_array(struct ath_hw
- REGWRITE_BUFFER_FLUSH(ah);
- }
-
-+void ath9k_hw_read_array(struct ath_hw *ah, u32 array[][2], int size)
-+{
-+ u32 *tmp_reg_list, *tmp_data;
-+ int i;
-+
-+ tmp_reg_list = kmalloc(size * sizeof(u32), GFP_KERNEL);
-+ if (!tmp_reg_list) {
-+ dev_err(ah->dev, "%s: tmp_reg_list: alloc filed\n", __func__);
-+ return;
-+ }
-+
-+ tmp_data = kmalloc(size * sizeof(u32), GFP_KERNEL);
-+ if (!tmp_data) {
-+ dev_err(ah->dev, "%s tmp_data: alloc filed\n", __func__);
-+ goto error_tmp_data;
-+ }
-+
-+ for (i = 0; i < size; i++)
-+ tmp_reg_list[i] = array[i][0];
-+
-+ REG_READ_MULTI(ah, tmp_reg_list, tmp_data, size);
-+
-+ for (i = 0; i < size; i++)
-+ array[i][1] = tmp_data[i];
-+
-+ kfree(tmp_data);
-+error_tmp_data:
-+ kfree(tmp_reg_list);
-+}
-+
- u32 ath9k_hw_reverse_bits(u32 val, u32 n)
- {
- u32 retval;
---- a/drivers/net/wireless/ath/ath9k/hw.h
-+++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -138,6 +138,8 @@
-
- #define REG_WRITE_ARRAY(iniarray, column, regWr) \
- ath9k_hw_write_array(ah, iniarray, column, &(regWr))
-+#define REG_READ_ARRAY(ah, array, size) \
-+ ath9k_hw_read_array(ah, array, size)
-
- #define AR_GPIO_OUTPUT_MUX_AS_OUTPUT 0
- #define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1
-@@ -1020,6 +1022,7 @@ void ath9k_hw_synth_delay(struct ath_hw
- bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout);
- void ath9k_hw_write_array(struct ath_hw *ah, const struct ar5416IniArray *array,
- int column, unsigned int *writecnt);
-+void ath9k_hw_read_array(struct ath_hw *ah, u32 array[][2], int size);
- u32 ath9k_hw_reverse_bits(u32 val, u32 n);
- u16 ath9k_hw_computetxtime(struct ath_hw *ah,
- u8 phy, int kbps,
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:52 +0100
-Subject: [PATCH] ath9k: ar9271_hw_pa_cal: use REG_READ_ARRAY
-
-insted of reading each register separatly
-and waste 4ms on each operation, we can
-use one shot read.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -440,8 +440,7 @@ static void ar9271_hw_pa_cal(struct ath_
- { AR9285_AN_RF2G3, 0 },
- };
-
-- for (i = 0; i < ARRAY_SIZE(regList); i++)
-- regList[i][1] = REG_READ(ah, regList[i][0]);
-+ REG_READ_ARRAY(ah, regList, ARRAY_SIZE(regList));
-
- ENABLE_REG_RMW_BUFFER(ah);
- /* 7834, b1=0 */
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:53 +0100
-Subject: [PATCH] ath9k: use one shot read in ath9k_hw_update_mibstats
-
-this will reduce some overhead on usb bus.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ani.c
-+++ b/drivers/net/wireless/ath/ath9k/ani.c
-@@ -107,11 +107,21 @@ static const struct ani_cck_level_entry
- static void ath9k_hw_update_mibstats(struct ath_hw *ah,
- struct ath9k_mib_stats *stats)
- {
-- stats->ackrcv_bad += REG_READ(ah, AR_ACK_FAIL);
-- stats->rts_bad += REG_READ(ah, AR_RTS_FAIL);
-- stats->fcs_bad += REG_READ(ah, AR_FCS_FAIL);
-- stats->rts_good += REG_READ(ah, AR_RTS_OK);
-- stats->beacons += REG_READ(ah, AR_BEACON_CNT);
-+ u32 addr[5] = {AR_RTS_OK, AR_RTS_FAIL, AR_ACK_FAIL,
-+ AR_FCS_FAIL, AR_BEACON_CNT};
-+ u32 data[5];
-+
-+ REG_READ_MULTI(ah, &addr[0], &data[0], 5);
-+ /* AR_RTS_OK */
-+ stats->rts_good += data[0];
-+ /* AR_RTS_FAIL */
-+ stats->rts_bad += data[1];
-+ /* AR_ACK_FAIL */
-+ stats->ackrcv_bad += data[2];
-+ /* AR_FCS_FAIL */
-+ stats->fcs_bad += data[3];
-+ /* AR_BEACON_CNT */
-+ stats->beacons += data[4];
- }
-
- static void ath9k_ani_restart(struct ath_hw *ah)
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:54 +0100
-Subject: [PATCH] ath9k: ath9k_hw_loadnf: use REG_RMW
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/calib.c
-+++ b/drivers/net/wireless/ath/ath9k/calib.c
-@@ -238,7 +238,6 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- {
- struct ath9k_nfcal_hist *h = NULL;
- unsigned i, j;
-- int32_t val;
- u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
- struct ath_common *common = ath9k_hw_common(ah);
- s16 default_nf = ath9k_hw_get_default_nf(ah, chan);
-@@ -246,6 +245,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- if (ah->caldata)
- h = ah->caldata->nfCalHist;
-
-+ ENABLE_REG_RMW_BUFFER(ah);
- for (i = 0; i < NUM_NF_READINGS; i++) {
- if (chainmask & (1 << i)) {
- s16 nfval;
-@@ -258,10 +258,8 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- else
- nfval = default_nf;
-
-- val = REG_READ(ah, ah->nf_regs[i]);
-- val &= 0xFFFFFE00;
-- val |= (((u32) nfval << 1) & 0x1ff);
-- REG_WRITE(ah, ah->nf_regs[i], val);
-+ REG_RMW(ah, ah->nf_regs[i],
-+ (((u32) nfval << 1) & 0x1ff), 0x1ff);
- }
- }
-
-@@ -274,6 +272,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
- AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
- REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
-+ REG_RMW_BUFFER_FLUSH(ah);
-
- /*
- * Wait for load to complete, should be fast, a few 10s of us.
-@@ -309,19 +308,17 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
- * by the median we just loaded. This will be initial (and max) value
- * of next noise floor calibration the baseband does.
- */
-- ENABLE_REGWRITE_BUFFER(ah);
-+ ENABLE_REG_RMW_BUFFER(ah);
- for (i = 0; i < NUM_NF_READINGS; i++) {
- if (chainmask & (1 << i)) {
- if ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(chan))
- continue;
-
-- val = REG_READ(ah, ah->nf_regs[i]);
-- val &= 0xFFFFFE00;
-- val |= (((u32) (-50) << 1) & 0x1ff);
-- REG_WRITE(ah, ah->nf_regs[i], val);
-+ REG_RMW(ah, ah->nf_regs[i],
-+ (((u32) (-50) << 1) & 0x1ff), 0x1ff);
- }
- }
-- REGWRITE_BUFFER_FLUSH(ah);
-+ REG_RMW_BUFFER_FLUSH(ah);
-
- return 0;
- }
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:55 +0100
-Subject: [PATCH] ath9k: write buffer related optimisation in
- ar5008_hw_set_channel_regs
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-@@ -681,12 +681,13 @@ static void ar5008_hw_set_channel_regs(s
- phymode |= AR_PHY_FC_DYN2040_PRI_CH;
-
- }
-+ ENABLE_REGWRITE_BUFFER(ah);
- REG_WRITE(ah, AR_PHY_TURBO, phymode);
-
-+ /* This function do only REG_WRITE, so
-+ * we can include it to REGWRITE_BUFFER. */
- ath9k_hw_set11nmac2040(ah, chan);
-
-- ENABLE_REGWRITE_BUFFER(ah);
--
- REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S);
- REG_WRITE(ah, AR_CST, 0xF << AR_CST_TIMEOUT_LIMIT_S);
-
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:56 +0100
-Subject: [PATCH] ath9k: ath9k_hw_set_4k_power_cal_tabl: use rmw buffer
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-@@ -389,6 +389,7 @@ static void ath9k_hw_set_4k_power_cal_ta
- }
- }
-
-+ ENABLE_REG_RMW_BUFFER(ah);
- REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN,
- (numXpdGain - 1) & 0x3);
- REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_1,
-@@ -396,6 +397,7 @@ static void ath9k_hw_set_4k_power_cal_ta
- REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_2,
- xpdGainValues[1]);
- REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_3, 0);
-+ REG_RMW_BUFFER_FLUSH(ah);
-
- for (i = 0; i < AR5416_EEP4K_MAX_CHAINS; i++) {
- regChainOffset = i * 0x1000;
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:57 +0100
-Subject: [PATCH] ath9k: use rmw buffer in ath9k_hw_set_operating_mode
- and ath9k_hw_reset
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1227,6 +1227,7 @@ static void ath9k_hw_set_operating_mode(
- u32 mask = AR_STA_ID1_STA_AP | AR_STA_ID1_ADHOC;
- u32 set = AR_STA_ID1_KSRCH_MODE;
-
-+ ENABLE_REG_RMW_BUFFER(ah);
- switch (opmode) {
- case NL80211_IFTYPE_ADHOC:
- if (!AR_SREV_9340_13(ah)) {
-@@ -1248,6 +1249,7 @@ static void ath9k_hw_set_operating_mode(
- break;
- }
- REG_RMW(ah, AR_STA_ID1, set, mask);
-+ REG_RMW_BUFFER_FLUSH(ah);
- }
-
- void ath9k_hw_get_delta_slope_vals(struct ath_hw *ah, u32 coef_scaled,
-@@ -1960,6 +1962,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
- if (!ath9k_hw_mci_is_enabled(ah))
- REG_WRITE(ah, AR_OBS, 8);
-
-+ ENABLE_REG_RMW_BUFFER(ah);
- if (ah->config.rx_intr_mitigation) {
- REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, ah->config.rimt_last);
- REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, ah->config.rimt_first);
-@@ -1969,6 +1972,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
- REG_RMW_FIELD(ah, AR_TIMT, AR_TIMT_LAST, 300);
- REG_RMW_FIELD(ah, AR_TIMT, AR_TIMT_FIRST, 750);
- }
-+ REG_RMW_BUFFER_FLUSH(ah);
-
- ath9k_hw_init_bb(ah, chan);
-
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:58 +0100
-Subject: [PATCH] ath9k: ath9k_hw_4k_set_board_values: use rmw buffer
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-@@ -1082,6 +1082,7 @@ static void ath9k_hw_4k_set_board_values
- mask = BIT(0)|BIT(5)|BIT(10)|BIT(15)|BIT(20)|BIT(25);
- pwrctrl = mask * bb_desired_scale;
- clr = mask * 0x1f;
-+ ENABLE_REG_RMW_BUFFER(ah);
- REG_RMW(ah, AR_PHY_TX_PWRCTRL8, pwrctrl, clr);
- REG_RMW(ah, AR_PHY_TX_PWRCTRL10, pwrctrl, clr);
- REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL12, pwrctrl, clr);
-@@ -1096,6 +1097,7 @@ static void ath9k_hw_4k_set_board_values
- clr = mask * 0x1f;
- REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL11, pwrctrl, clr);
- REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL13, pwrctrl, clr);
-+ REG_RMW_BUFFER_FLUSH(ah);
- }
- }
-
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:29:59 +0100
-Subject: [PATCH] ath9k: ath9k_hw_analog_shift_rmw: use REG_RMW
-
-use REG_RMW in ath9k_hw_analog_shift_rmw.
-It will double execution speed on usb bus.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
-@@ -27,12 +27,7 @@ void ath9k_hw_analog_shift_regwrite(stru
- void ath9k_hw_analog_shift_rmw(struct ath_hw *ah, u32 reg, u32 mask,
- u32 shift, u32 val)
- {
-- u32 regVal;
--
-- regVal = REG_READ(ah, reg) & ~mask;
-- regVal |= (val << shift) & mask;
--
-- REG_WRITE(ah, reg, regVal);
-+ REG_RMW(ah, reg, ((val << shift) & mask), mask);
-
- if (ah->config.analog_shiftreg)
- udelay(100);
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:30:01 +0100
-Subject: [PATCH] ath9k: use REG_RMW and rmw buffer in
- ath9k_hw_4k_set_gain
-
-it is possible to reduce time needed for this function
-by rplacing REG_WRITE with REG_RMW (plus dummy 0) and putt all commands
-in same buffer.
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
-@@ -772,15 +772,14 @@ static void ath9k_hw_4k_set_gain(struct
- struct ar5416_eeprom_4k *eep,
- u8 txRxAttenLocal)
- {
-- REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0,
-- pModal->antCtrlChain[0]);
--
-- REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0),
-- (REG_READ(ah, AR_PHY_TIMING_CTRL4(0)) &
-- ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF |
-- AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) |
-- SM(pModal->iqCalICh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
-- SM(pModal->iqCalQCh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF));
-+ ENABLE_REG_RMW_BUFFER(ah);
-+ REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0,
-+ pModal->antCtrlChain[0], 0);
-+
-+ REG_RMW(ah, AR_PHY_TIMING_CTRL4(0),
-+ SM(pModal->iqCalICh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
-+ SM(pModal->iqCalQCh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF),
-+ AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF | AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF);
-
- if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
- AR5416_EEP_MINOR_VER_3) {
-@@ -819,6 +818,7 @@ static void ath9k_hw_4k_set_gain(struct
- AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal);
- REG_RMW_FIELD(ah, AR_PHY_RXGAIN + 0x1000,
- AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[0]);
-+ REG_RMW_BUFFER_FLUSH(ah);
- }
-
- /*
+++ /dev/null
-From: Oleksij Rempel <linux@rempel-privat.de>
-Date: Sun, 22 Mar 2015 19:30:03 +0100
-Subject: [PATCH] ath9k: use REG_RMW and rmw buffer in
- ath9k_hw_def_set_gain
-
-Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
-@@ -466,6 +466,7 @@ static void ath9k_hw_def_set_gain(struct
- struct ar5416_eeprom_def *eep,
- u8 txRxAttenLocal, int regChainOffset, int i)
- {
-+ ENABLE_REG_RMW_BUFFER(ah);
- if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_3) {
- txRxAttenLocal = pModal->txRxAttenCh[i];
-
-@@ -483,16 +484,12 @@ static void ath9k_hw_def_set_gain(struct
- AR_PHY_GAIN_2GHZ_XATTEN2_DB,
- pModal->xatten2Db[i]);
- } else {
-- REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-- (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
-- ~AR_PHY_GAIN_2GHZ_BSW_MARGIN)
-- | SM(pModal-> bswMargin[i],
-- AR_PHY_GAIN_2GHZ_BSW_MARGIN));
-- REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-- (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
-- ~AR_PHY_GAIN_2GHZ_BSW_ATTEN)
-- | SM(pModal->bswAtten[i],
-- AR_PHY_GAIN_2GHZ_BSW_ATTEN));
-+ REG_RMW(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-+ SM(pModal-> bswMargin[i], AR_PHY_GAIN_2GHZ_BSW_MARGIN),
-+ AR_PHY_GAIN_2GHZ_BSW_MARGIN);
-+ REG_RMW(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-+ SM(pModal->bswAtten[i], AR_PHY_GAIN_2GHZ_BSW_ATTEN),
-+ AR_PHY_GAIN_2GHZ_BSW_ATTEN);
- }
- }
-
-@@ -504,17 +501,14 @@ static void ath9k_hw_def_set_gain(struct
- AR_PHY_RXGAIN + regChainOffset,
- AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[i]);
- } else {
-- REG_WRITE(ah,
-- AR_PHY_RXGAIN + regChainOffset,
-- (REG_READ(ah, AR_PHY_RXGAIN + regChainOffset) &
-- ~AR_PHY_RXGAIN_TXRX_ATTEN)
-- | SM(txRxAttenLocal, AR_PHY_RXGAIN_TXRX_ATTEN));
-- REG_WRITE(ah,
-- AR_PHY_GAIN_2GHZ + regChainOffset,
-- (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
-- ~AR_PHY_GAIN_2GHZ_RXTX_MARGIN) |
-- SM(pModal->rxTxMarginCh[i], AR_PHY_GAIN_2GHZ_RXTX_MARGIN));
-+ REG_RMW(ah, AR_PHY_RXGAIN + regChainOffset,
-+ SM(txRxAttenLocal, AR_PHY_RXGAIN_TXRX_ATTEN),
-+ AR_PHY_RXGAIN_TXRX_ATTEN);
-+ REG_RMW(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-+ SM(pModal->rxTxMarginCh[i], AR_PHY_GAIN_2GHZ_RXTX_MARGIN),
-+ AR_PHY_GAIN_2GHZ_RXTX_MARGIN);
- }
-+ REG_RMW_BUFFER_FLUSH(ah);
- }
-
- static void ath9k_hw_def_set_board_values(struct ath_hw *ah,
+++ /dev/null
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:38 +0100
-Subject: [PATCH] brcmfmac: Fix oops when SDIO device is removed.
-
-On removal of SDIO card both functions of card will be getting
-a remove call. When the first is hanging in ctrl frame xmit then
-the second will cause oops. This patch fixes the xmit ctrl
-handling in case of serious errors and also limits the handling
-for remove to function 1 only.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1194,7 +1194,7 @@ static void brcmf_ops_sdio_remove(struct
- brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
- brcmf_dbg(SDIO, "Function: %d\n", func->num);
-
-- if (func->num != 1 && func->num != 2)
-+ if (func->num != 1)
- return;
-
- bus_if = dev_get_drvdata(&func->dev);
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -2740,6 +2740,11 @@ static void brcmf_sdio_dpc(struct brcmf_
- if ((bus->sdiodev->state != BRCMF_SDIOD_DATA) || (err != 0)) {
- brcmf_err("failed backplane access over SDIO, halting operation\n");
- atomic_set(&bus->intstatus, 0);
-+ if (bus->ctrl_frame_stat) {
-+ bus->ctrl_frame_err = -ENODEV;
-+ bus->ctrl_frame_stat = false;
-+ brcmf_sdio_wait_event_wakeup(bus);
-+ }
- } else if (atomic_read(&bus->intstatus) ||
- atomic_read(&bus->ipend) > 0 ||
- (!atomic_read(&bus->fcstate) &&
+++ /dev/null
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:39 +0100
-Subject: [PATCH] brcmfmac: Simplify watchdog sleep.
-
-The watchdog thread is used to put the SDIO bus to sleep when the
-system is idling. This patch simplifies the way it is determined
-when sleep can be entered.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -485,10 +485,9 @@ struct brcmf_sdio {
- #endif /* DEBUG */
-
- uint clkstate; /* State of sd and backplane clock(s) */
-- bool activity; /* Activity flag for clock down */
- s32 idletime; /* Control for activity timeout */
-- s32 idlecount; /* Activity timeout counter */
-- s32 idleclock; /* How to set bus driver when idle */
-+ s32 idlecount; /* Activity timeout counter */
-+ s32 idleclock; /* How to set bus driver when idle */
- bool rxflow_mode; /* Rx flow control mode */
- bool rxflow; /* Is rx flow control on */
- bool alp_only; /* Don't use HT clock (ALP only) */
-@@ -511,6 +510,7 @@ struct brcmf_sdio {
- struct workqueue_struct *brcmf_wq;
- struct work_struct datawork;
- atomic_t dpc_tskcnt;
-+ atomic_t dpc_running;
-
- bool txoff; /* Transmit flow-controlled */
- struct brcmf_sdio_count sdcnt;
-@@ -959,13 +959,8 @@ static int brcmf_sdio_clkctl(struct brcm
- brcmf_dbg(SDIO, "Enter\n");
-
- /* Early exit if we're already there */
-- if (bus->clkstate == target) {
-- if (target == CLK_AVAIL) {
-- brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
-- bus->activity = true;
-- }
-+ if (bus->clkstate == target)
- return 0;
-- }
-
- switch (target) {
- case CLK_AVAIL:
-@@ -975,7 +970,6 @@ static int brcmf_sdio_clkctl(struct brcm
- /* Now request HT Avail on the backplane */
- brcmf_sdio_htclk(bus, true, pendok);
- brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
-- bus->activity = true;
- break;
-
- case CLK_SDONLY:
-@@ -1024,17 +1018,6 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *
-
- /* Going to sleep */
- if (sleep) {
-- /* Don't sleep if something is pending */
-- if (atomic_read(&bus->intstatus) ||
-- atomic_read(&bus->ipend) > 0 ||
-- bus->ctrl_frame_stat ||
-- (!atomic_read(&bus->fcstate) &&
-- brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
-- data_ok(bus))) {
-- err = -EBUSY;
-- goto done;
-- }
--
- clkcsr = brcmf_sdiod_regrb(bus->sdiodev,
- SBSDIO_FUNC1_CHIPCLKCSR,
- &err);
-@@ -1045,11 +1028,7 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *
- SBSDIO_ALP_AVAIL_REQ, &err);
- }
- err = brcmf_sdio_kso_control(bus, false);
-- /* disable watchdog */
-- if (!err)
-- brcmf_sdio_wd_timer(bus, 0);
- } else {
-- bus->idlecount = 0;
- err = brcmf_sdio_kso_control(bus, true);
- }
- if (err) {
-@@ -3566,7 +3545,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *b
- queue_work(bus->brcmf_wq, &bus->datawork);
- }
-
--static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
-+static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
- {
- brcmf_dbg(TIMER, "Enter\n");
-
-@@ -3627,22 +3606,21 @@ static bool brcmf_sdio_bus_watchdog(stru
- #endif /* DEBUG */
-
- /* On idle timeout clear activity flag and/or turn off clock */
-- if ((bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
-- if (++bus->idlecount >= bus->idletime) {
-+ if ((atomic_read(&bus->dpc_tskcnt) == 0) &&
-+ (atomic_read(&bus->dpc_running) == 0) &&
-+ (bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
-+ bus->idlecount++;
-+ if (bus->idlecount > bus->idletime) {
-+ brcmf_dbg(SDIO, "idle\n");
-+ sdio_claim_host(bus->sdiodev->func[1]);
-+ brcmf_sdio_wd_timer(bus, 0);
- bus->idlecount = 0;
-- if (bus->activity) {
-- bus->activity = false;
-- brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
-- } else {
-- brcmf_dbg(SDIO, "idle\n");
-- sdio_claim_host(bus->sdiodev->func[1]);
-- brcmf_sdio_bus_sleep(bus, true, false);
-- sdio_release_host(bus->sdiodev->func[1]);
-- }
-+ brcmf_sdio_bus_sleep(bus, true, false);
-+ sdio_release_host(bus->sdiodev->func[1]);
- }
-+ } else {
-+ bus->idlecount = 0;
- }
--
-- return (atomic_read(&bus->ipend) > 0);
- }
-
- static void brcmf_sdio_dataworker(struct work_struct *work)
-@@ -3651,8 +3629,11 @@ static void brcmf_sdio_dataworker(struct
- datawork);
-
- while (atomic_read(&bus->dpc_tskcnt)) {
-+ atomic_set(&bus->dpc_running, 1);
- atomic_set(&bus->dpc_tskcnt, 0);
- brcmf_sdio_dpc(bus);
-+ bus->idlecount = 0;
-+ atomic_set(&bus->dpc_running, 0);
- }
- if (brcmf_sdiod_freezing(bus->sdiodev)) {
- brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DOWN);
-@@ -4154,6 +4135,7 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
- }
- /* Initialize DPC thread */
- atomic_set(&bus->dpc_tskcnt, 0);
-+ atomic_set(&bus->dpc_running, 0);
-
- /* Assign bus interface call back */
- bus->sdiodev->bus_if->dev = bus->sdiodev->dev;
+++ /dev/null
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:40 +0100
-Subject: [PATCH] brcmfmac: Fix possible race-condition.
-
-SDIO is using a "shared" variable to handoff ctl frames to DPC
-and to see when they are done. In a timeout situation this can
-lead to erroneous situation where DPC started to handle the ctl
-frame while the timeout expired. This patch will fix this by
-adding locking around the shared variable.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -2700,11 +2700,13 @@ static void brcmf_sdio_dpc(struct brcmf_
- if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) &&
- data_ok(bus)) {
- sdio_claim_host(bus->sdiodev->func[1]);
-- err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf,
-- bus->ctrl_frame_len);
-+ if (bus->ctrl_frame_stat) {
-+ err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf,
-+ bus->ctrl_frame_len);
-+ bus->ctrl_frame_err = err;
-+ bus->ctrl_frame_stat = false;
-+ }
- sdio_release_host(bus->sdiodev->func[1]);
-- bus->ctrl_frame_err = err;
-- bus->ctrl_frame_stat = false;
- brcmf_sdio_wait_event_wakeup(bus);
- }
- /* Send queued frames (limit 1 if rx may still be pending) */
-@@ -2720,9 +2722,13 @@ static void brcmf_sdio_dpc(struct brcmf_
- brcmf_err("failed backplane access over SDIO, halting operation\n");
- atomic_set(&bus->intstatus, 0);
- if (bus->ctrl_frame_stat) {
-- bus->ctrl_frame_err = -ENODEV;
-- bus->ctrl_frame_stat = false;
-- brcmf_sdio_wait_event_wakeup(bus);
-+ sdio_claim_host(bus->sdiodev->func[1]);
-+ if (bus->ctrl_frame_stat) {
-+ bus->ctrl_frame_err = -ENODEV;
-+ bus->ctrl_frame_stat = false;
-+ brcmf_sdio_wait_event_wakeup(bus);
-+ }
-+ sdio_release_host(bus->sdiodev->func[1]);
- }
- } else if (atomic_read(&bus->intstatus) ||
- atomic_read(&bus->ipend) > 0 ||
-@@ -2930,15 +2936,20 @@ brcmf_sdio_bus_txctl(struct device *dev,
- brcmf_sdio_trigger_dpc(bus);
- wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat,
- msecs_to_jiffies(CTL_DONE_TIMEOUT));
--
-- if (!bus->ctrl_frame_stat) {
-+ ret = 0;
-+ if (bus->ctrl_frame_stat) {
-+ sdio_claim_host(bus->sdiodev->func[1]);
-+ if (bus->ctrl_frame_stat) {
-+ brcmf_dbg(SDIO, "ctrl_frame timeout\n");
-+ bus->ctrl_frame_stat = false;
-+ ret = -ETIMEDOUT;
-+ }
-+ sdio_release_host(bus->sdiodev->func[1]);
-+ }
-+ if (!ret) {
- brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",
- bus->ctrl_frame_err);
- ret = bus->ctrl_frame_err;
-- } else {
-- brcmf_dbg(SDIO, "ctrl_frame timeout\n");
-- bus->ctrl_frame_stat = false;
-- ret = -ETIMEDOUT;
- }
-
- if (ret)
+++ /dev/null
-From: Syed Asifful Dayyan <syedd@broadcom.com>
-Date: Fri, 6 Mar 2015 18:40:42 +0100
-Subject: [PATCH] brcmfmac: Add support for BCM4345 SDIO chipset.
-
-These changes add support for BCM4345 SDIO chipset.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Syed Asifful Dayyan <syedd@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1096,6 +1096,7 @@ static const struct sdio_device_id brcmf
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43341),
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43362),
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339),
-+ BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4345),
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354),
- { /* end: all zeroes */ }
- };
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -491,6 +491,10 @@ static void brcmf_chip_get_raminfo(struc
- case BRCM_CC_43362_CHIP_ID:
- ci->pub.ramsize = 0x3c000;
- break;
-+ case BRCM_CC_4345_CHIP_ID:
-+ ci->pub.ramsize = 0xc8000;
-+ ci->pub.rambase = 0x198000;
-+ break;
- case BRCM_CC_4339_CHIP_ID:
- case BRCM_CC_4354_CHIP_ID:
- case BRCM_CC_4356_CHIP_ID:
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -617,6 +617,8 @@ static const struct sdiod_drive_str sdio
- #define BCM43362_NVRAM_NAME "brcm/brcmfmac43362-sdio.txt"
- #define BCM4339_FIRMWARE_NAME "brcm/brcmfmac4339-sdio.bin"
- #define BCM4339_NVRAM_NAME "brcm/brcmfmac4339-sdio.txt"
-+#define BCM4345_FIRMWARE_NAME "brcm/brcmfmac4345-sdio.bin"
-+#define BCM4345_NVRAM_NAME "brcm/brcmfmac4345-sdio.txt"
- #define BCM4354_FIRMWARE_NAME "brcm/brcmfmac4354-sdio.bin"
- #define BCM4354_NVRAM_NAME "brcm/brcmfmac4354-sdio.txt"
-
-@@ -640,6 +642,8 @@ MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM43362_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4339_NVRAM_NAME);
-+MODULE_FIRMWARE(BCM4345_FIRMWARE_NAME);
-+MODULE_FIRMWARE(BCM4345_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4354_NVRAM_NAME);
-
-@@ -669,6 +673,7 @@ static const struct brcmf_firmware_names
- { BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) },
- { BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
- { BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
-+ { BRCM_CC_4345_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4345) },
- { BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) }
- };
-
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -37,6 +37,7 @@
- #define BRCM_CC_43362_CHIP_ID 43362
- #define BRCM_CC_4335_CHIP_ID 0x4335
- #define BRCM_CC_4339_CHIP_ID 0x4339
-+#define BRCM_CC_4345_CHIP_ID 0x4345
- #define BRCM_CC_4354_CHIP_ID 0x4354
- #define BRCM_CC_4356_CHIP_ID 0x4356
- #define BRCM_CC_43566_CHIP_ID 43566
---- a/include/linux/mmc/sdio_ids.h
-+++ b/include/linux/mmc/sdio_ids.h
-@@ -33,6 +33,7 @@
- #define SDIO_DEVICE_ID_BROADCOM_43341 0xa94d
- #define SDIO_DEVICE_ID_BROADCOM_4335_4339 0x4335
- #define SDIO_DEVICE_ID_BROADCOM_43362 0xa962
-+#define SDIO_DEVICE_ID_BROADCOM_4345 0x4345
- #define SDIO_DEVICE_ID_BROADCOM_4354 0x4354
-
- #define SDIO_VENDOR_ID_INTEL 0x0089
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:27 +0100
-Subject: [PATCH] brcmfmac: remove duplication of ramsize info
-
-Removing the ramsize from the brcmf_sdio structure to avoid
-duplication. The information is available in brcmf_chip
-structure.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -432,8 +432,6 @@ struct brcmf_sdio {
- struct brcmf_sdio_dev *sdiodev; /* sdio device handler */
- struct brcmf_chip *ci; /* Chip info struct */
-
-- u32 ramsize; /* Size of RAM in SOCRAM (bytes) */
--
- u32 hostintmask; /* Copy of Host Interrupt Mask */
- atomic_t intstatus; /* Intstatus bits (events) pending */
- atomic_t fcstate; /* State of dongle flow-control */
-@@ -1075,7 +1073,7 @@ static int brcmf_sdio_readshared(struct
- struct sdpcm_shared_le sh_le;
- __le32 addr_le;
-
-- shaddr = bus->ci->rambase + bus->ramsize - 4;
-+ shaddr = bus->ci->rambase + bus->ci->ramsize - 4;
-
- /*
- * Read last word in socram to determine
-@@ -3871,13 +3869,6 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
- drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
- brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength);
-
-- /* Get info on the SOCRAM cores... */
-- bus->ramsize = bus->ci->ramsize;
-- if (!(bus->ramsize)) {
-- brcmf_err("failed to find SOCRAM memory!\n");
-- goto fail;
-- }
--
- /* Set card control so an SDIO card reset does a WLAN backplane reset */
- reg_val = brcmf_sdiod_regrb(bus->sdiodev,
- SDIO_CCCR_BRCM_CARDCTRL, &err);
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:28 +0100
-Subject: [PATCH] brcmfmac: always perform cores checks
-
-Instead of checking the cores in the chip only if CONFIG_BRCMDBG
-is selected perform the check always and extend it with more sanity
-checking.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -419,13 +419,13 @@ static struct brcmf_core *brcmf_chip_add
- return &core->pub;
- }
-
--#ifdef DEBUG
- /* safety check for chipinfo */
- static int brcmf_chip_cores_check(struct brcmf_chip_priv *ci)
- {
- struct brcmf_core_priv *core;
- bool need_socram = false;
- bool has_socram = false;
-+ bool cpu_found = false;
- int idx = 1;
-
- list_for_each_entry(core, &ci->cores, list) {
-@@ -435,12 +435,14 @@ static int brcmf_chip_cores_check(struct
-
- switch (core->pub.id) {
- case BCMA_CORE_ARM_CM3:
-+ cpu_found = true;
- need_socram = true;
- break;
- case BCMA_CORE_INTERNAL_MEM:
- has_socram = true;
- break;
- case BCMA_CORE_ARM_CR4:
-+ cpu_found = true;
- if (ci->pub.rambase == 0) {
- brcmf_err("RAM base not provided with ARM CR4 core\n");
- return -ENOMEM;
-@@ -451,19 +453,21 @@ static int brcmf_chip_cores_check(struct
- }
- }
-
-+ if (!cpu_found) {
-+ brcmf_err("CPU core not detected\n");
-+ return -ENXIO;
-+ }
- /* check RAM core presence for ARM CM3 core */
- if (need_socram && !has_socram) {
- brcmf_err("RAM core not provided with ARM CM3 core\n");
- return -ENODEV;
- }
-+ if (!ci->pub.ramsize) {
-+ brcmf_err("RAM size is undetermined\n");
-+ return -ENOMEM;
-+ }
- return 0;
- }
--#else /* DEBUG */
--static inline int brcmf_chip_cores_check(struct brcmf_chip_priv *ci)
--{
-- return 0;
--}
--#endif
-
- static void brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci)
- {
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:29 +0100
-Subject: [PATCH] brcmfmac: rename chip download functions
-
-The functions brcmf_chip_[enter/exit]_download() are not exclusively
-used for firmware download so rename these more appropriate.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -807,7 +807,7 @@ struct brcmf_chip *brcmf_chip_attach(voi
- err = -EINVAL;
- if (WARN_ON(!ops->prepare))
- err = -EINVAL;
-- if (WARN_ON(!ops->exit_dl))
-+ if (WARN_ON(!ops->activate))
- err = -EINVAL;
- if (err < 0)
- return ERR_PTR(-EINVAL);
-@@ -905,7 +905,7 @@ void brcmf_chip_resetcore(struct brcmf_c
- }
-
- static void
--brcmf_chip_cm3_enterdl(struct brcmf_chip_priv *chip)
-+brcmf_chip_cm3_set_passive(struct brcmf_chip_priv *chip)
- {
- struct brcmf_core *core;
-
-@@ -919,7 +919,7 @@ brcmf_chip_cm3_enterdl(struct brcmf_chip
- brcmf_chip_resetcore(core, 0, 0, 0);
- }
-
--static bool brcmf_chip_cm3_exitdl(struct brcmf_chip_priv *chip)
-+static bool brcmf_chip_cm3_set_active(struct brcmf_chip_priv *chip)
- {
- struct brcmf_core *core;
-
-@@ -929,7 +929,7 @@ static bool brcmf_chip_cm3_exitdl(struct
- return false;
- }
-
-- chip->ops->exit_dl(chip->ctx, &chip->pub, 0);
-+ chip->ops->activate(chip->ctx, &chip->pub, 0);
-
- core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_ARM_CM3);
- brcmf_chip_resetcore(core, 0, 0, 0);
-@@ -938,7 +938,7 @@ static bool brcmf_chip_cm3_exitdl(struct
- }
-
- static inline void
--brcmf_chip_cr4_enterdl(struct brcmf_chip_priv *chip)
-+brcmf_chip_cr4_set_passive(struct brcmf_chip_priv *chip)
- {
- struct brcmf_core *core;
-
-@@ -951,11 +951,11 @@ brcmf_chip_cr4_enterdl(struct brcmf_chip
- D11_BCMA_IOCTL_PHYCLOCKEN);
- }
-
--static bool brcmf_chip_cr4_exitdl(struct brcmf_chip_priv *chip, u32 rstvec)
-+static bool brcmf_chip_cr4_set_active(struct brcmf_chip_priv *chip, u32 rstvec)
- {
- struct brcmf_core *core;
-
-- chip->ops->exit_dl(chip->ctx, &chip->pub, rstvec);
-+ chip->ops->activate(chip->ctx, &chip->pub, rstvec);
-
- /* restore ARM */
- core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_ARM_CR4);
-@@ -964,7 +964,7 @@ static bool brcmf_chip_cr4_exitdl(struct
- return true;
- }
-
--void brcmf_chip_enter_download(struct brcmf_chip *pub)
-+void brcmf_chip_set_passive(struct brcmf_chip *pub)
- {
- struct brcmf_chip_priv *chip;
- struct brcmf_core *arm;
-@@ -974,14 +974,14 @@ void brcmf_chip_enter_download(struct br
- chip = container_of(pub, struct brcmf_chip_priv, pub);
- arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CR4);
- if (arm) {
-- brcmf_chip_cr4_enterdl(chip);
-+ brcmf_chip_cr4_set_passive(chip);
- return;
- }
-
-- brcmf_chip_cm3_enterdl(chip);
-+ brcmf_chip_cm3_set_passive(chip);
- }
-
--bool brcmf_chip_exit_download(struct brcmf_chip *pub, u32 rstvec)
-+bool brcmf_chip_set_active(struct brcmf_chip *pub, u32 rstvec)
- {
- struct brcmf_chip_priv *chip;
- struct brcmf_core *arm;
-@@ -991,9 +991,9 @@ bool brcmf_chip_exit_download(struct brc
- chip = container_of(pub, struct brcmf_chip_priv, pub);
- arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CR4);
- if (arm)
-- return brcmf_chip_cr4_exitdl(chip, rstvec);
-+ return brcmf_chip_cr4_set_active(chip, rstvec);
-
-- return brcmf_chip_cm3_exitdl(chip);
-+ return brcmf_chip_cm3_set_active(chip);
- }
-
- bool brcmf_chip_sr_capable(struct brcmf_chip *pub)
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-@@ -64,7 +64,7 @@ struct brcmf_core {
- * @write32: write 32-bit value over bus.
- * @prepare: prepare bus for core configuration.
- * @setup: bus-specific core setup.
-- * @exit_dl: exit download state.
-+ * @active: chip becomes active.
- * The callback should use the provided @rstvec when non-zero.
- */
- struct brcmf_buscore_ops {
-@@ -72,7 +72,7 @@ struct brcmf_buscore_ops {
- void (*write32)(void *ctx, u32 addr, u32 value);
- int (*prepare)(void *ctx);
- int (*setup)(void *ctx, struct brcmf_chip *chip);
-- void (*exit_dl)(void *ctx, struct brcmf_chip *chip, u32 rstvec);
-+ void (*activate)(void *ctx, struct brcmf_chip *chip, u32 rstvec);
- };
-
- struct brcmf_chip *brcmf_chip_attach(void *ctx,
-@@ -84,8 +84,8 @@ bool brcmf_chip_iscoreup(struct brcmf_co
- void brcmf_chip_coredisable(struct brcmf_core *core, u32 prereset, u32 reset);
- void brcmf_chip_resetcore(struct brcmf_core *core, u32 prereset, u32 reset,
- u32 postreset);
--void brcmf_chip_enter_download(struct brcmf_chip *ci);
--bool brcmf_chip_exit_download(struct brcmf_chip *ci, u32 rstvec);
-+void brcmf_chip_set_passive(struct brcmf_chip *ci);
-+bool brcmf_chip_set_active(struct brcmf_chip *ci, u32 rstvec);
- bool brcmf_chip_sr_capable(struct brcmf_chip *pub);
-
- #endif /* BRCMF_AXIDMP_H */
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -509,7 +509,7 @@ static void brcmf_pcie_attach(struct brc
-
- static int brcmf_pcie_enter_download_state(struct brcmf_pciedev_info *devinfo)
- {
-- brcmf_chip_enter_download(devinfo->ci);
-+ brcmf_chip_set_passive(devinfo->ci);
-
- if (devinfo->ci->chip == BRCM_CC_43602_CHIP_ID) {
- brcmf_pcie_select_core(devinfo, BCMA_CORE_ARM_CR4);
-@@ -536,7 +536,7 @@ static int brcmf_pcie_exit_download_stat
- brcmf_chip_resetcore(core, 0, 0, 0);
- }
-
-- return !brcmf_chip_exit_download(devinfo->ci, resetintr);
-+ return !brcmf_chip_set_active(devinfo->ci, resetintr);
- }
-
-
-@@ -1566,8 +1566,8 @@ static int brcmf_pcie_buscoreprep(void *
- }
-
-
--static void brcmf_pcie_buscore_exitdl(void *ctx, struct brcmf_chip *chip,
-- u32 rstvec)
-+static void brcmf_pcie_buscore_activate(void *ctx, struct brcmf_chip *chip,
-+ u32 rstvec)
- {
- struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)ctx;
-
-@@ -1577,7 +1577,7 @@ static void brcmf_pcie_buscore_exitdl(vo
-
- static const struct brcmf_buscore_ops brcmf_pcie_buscore_ops = {
- .prepare = brcmf_pcie_buscoreprep,
-- .exit_dl = brcmf_pcie_buscore_exitdl,
-+ .activate = brcmf_pcie_buscore_activate,
- .read32 = brcmf_pcie_buscore_read32,
- .write32 = brcmf_pcie_buscore_write32,
- };
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -3357,7 +3357,7 @@ static int brcmf_sdio_download_firmware(
- brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
-
- /* Keep arm in reset */
-- brcmf_chip_enter_download(bus->ci);
-+ brcmf_chip_set_passive(bus->ci);
-
- rstvec = get_unaligned_le32(fw->data);
- brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec);
-@@ -3378,7 +3378,7 @@ static int brcmf_sdio_download_firmware(
- }
-
- /* Take arm out of reset */
-- if (!brcmf_chip_exit_download(bus->ci, rstvec)) {
-+ if (!brcmf_chip_set_active(bus->ci, rstvec)) {
- brcmf_err("error getting out of ARM core reset\n");
- goto err;
- }
-@@ -3771,8 +3771,8 @@ static int brcmf_sdio_buscoreprep(void *
- return 0;
- }
-
--static void brcmf_sdio_buscore_exitdl(void *ctx, struct brcmf_chip *chip,
-- u32 rstvec)
-+static void brcmf_sdio_buscore_activate(void *ctx, struct brcmf_chip *chip,
-+ u32 rstvec)
- {
- struct brcmf_sdio_dev *sdiodev = ctx;
- struct brcmf_core *core;
-@@ -3815,7 +3815,7 @@ static void brcmf_sdio_buscore_write32(v
-
- static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = {
- .prepare = brcmf_sdio_buscoreprep,
-- .exit_dl = brcmf_sdio_buscore_exitdl,
-+ .activate = brcmf_sdio_buscore_activate,
- .read32 = brcmf_sdio_buscore_read32,
- .write32 = brcmf_sdio_buscore_write32,
- };
-@@ -4239,12 +4239,11 @@ void brcmf_sdio_remove(struct brcmf_sdio
- sdio_claim_host(bus->sdiodev->func[1]);
- brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
- /* Leave the device in state where it is
-- * 'quiet'. This is done by putting it in
-- * download_state which essentially resets
-- * all necessary cores.
-+ * 'passive'. This is done by resetting all
-+ * necessary cores.
- */
- msleep(20);
-- brcmf_chip_enter_download(bus->ci);
-+ brcmf_chip_set_passive(bus->ci);
- brcmf_sdio_clkctl(bus, CLK_NONE, false);
- sdio_release_host(bus->sdiodev->func[1]);
- }
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:30 +0100
-Subject: [PATCH] brcmfmac: assure device is ready for download after
- brcmf_chip_attach()
-
-Make the brcmf_chip_attach() function responsible for putting the
-device in a state where it is accessible for firmware download.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -786,12 +786,6 @@ static int brcmf_chip_setup(struct brcmf
- if (chip->ops->setup)
- ret = chip->ops->setup(chip->ctx, pub);
-
-- /*
-- * Make sure any on-chip ARM is off (in case strapping is wrong),
-- * or downloaded code was already running.
-- */
-- brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CM3);
-- brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CR4);
- return ret;
- }
-
-@@ -833,6 +827,8 @@ struct brcmf_chip *brcmf_chip_attach(voi
- if (err < 0)
- goto fail;
-
-+ /* assure chip is passive for download */
-+ brcmf_chip_set_passive(&chip->pub);
- return &chip->pub;
-
- fail:
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -509,8 +509,6 @@ static void brcmf_pcie_attach(struct brc
-
- static int brcmf_pcie_enter_download_state(struct brcmf_pciedev_info *devinfo)
- {
-- brcmf_chip_set_passive(devinfo->ci);
--
- if (devinfo->ci->chip == BRCM_CC_43602_CHIP_ID) {
- brcmf_pcie_select_core(devinfo, BCMA_CORE_ARM_CR4);
- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_ARMCR4REG_BANKIDX,
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -3356,9 +3356,6 @@ static int brcmf_sdio_download_firmware(
- sdio_claim_host(bus->sdiodev->func[1]);
- brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
-
-- /* Keep arm in reset */
-- brcmf_chip_set_passive(bus->ci);
--
- rstvec = get_unaligned_le32(fw->data);
- brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec);
-
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:31 +0100
-Subject: [PATCH] brcmfmac: extract ram size info from internal memory
- registers
-
-Instead of hard-coded memory sizes it is possible to obtain that
-information from the internal memory registers.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -100,9 +100,6 @@
- #define BCM4329_CORE_SOCRAM_BASE 0x18003000
- /* ARM Cortex M3 core, ID 0x82a */
- #define BCM4329_CORE_ARM_BASE 0x18002000
--#define BCM4329_RAMSIZE 0x48000
--/* bcm43143 */
--#define BCM43143_RAMSIZE 0x70000
-
- #define CORE_SB(base, field) \
- (base + SBCONFIGOFF + offsetof(struct sbconfig, field))
-@@ -150,6 +147,78 @@ struct sbconfig {
- u32 sbidhigh; /* identification */
- };
-
-+/* bankidx and bankinfo reg defines corerev >= 8 */
-+#define SOCRAM_BANKINFO_RETNTRAM_MASK 0x00010000
-+#define SOCRAM_BANKINFO_SZMASK 0x0000007f
-+#define SOCRAM_BANKIDX_ROM_MASK 0x00000100
-+
-+#define SOCRAM_BANKIDX_MEMTYPE_SHIFT 8
-+/* socram bankinfo memtype */
-+#define SOCRAM_MEMTYPE_RAM 0
-+#define SOCRAM_MEMTYPE_R0M 1
-+#define SOCRAM_MEMTYPE_DEVRAM 2
-+
-+#define SOCRAM_BANKINFO_SZBASE 8192
-+#define SRCI_LSS_MASK 0x00f00000
-+#define SRCI_LSS_SHIFT 20
-+#define SRCI_SRNB_MASK 0xf0
-+#define SRCI_SRNB_SHIFT 4
-+#define SRCI_SRBSZ_MASK 0xf
-+#define SRCI_SRBSZ_SHIFT 0
-+#define SR_BSZ_BASE 14
-+
-+struct sbsocramregs {
-+ u32 coreinfo;
-+ u32 bwalloc;
-+ u32 extracoreinfo;
-+ u32 biststat;
-+ u32 bankidx;
-+ u32 standbyctrl;
-+
-+ u32 errlogstatus; /* rev 6 */
-+ u32 errlogaddr; /* rev 6 */
-+ /* used for patching rev 3 & 5 */
-+ u32 cambankidx;
-+ u32 cambankstandbyctrl;
-+ u32 cambankpatchctrl;
-+ u32 cambankpatchtblbaseaddr;
-+ u32 cambankcmdreg;
-+ u32 cambankdatareg;
-+ u32 cambankmaskreg;
-+ u32 PAD[1];
-+ u32 bankinfo; /* corev 8 */
-+ u32 bankpda;
-+ u32 PAD[14];
-+ u32 extmemconfig;
-+ u32 extmemparitycsr;
-+ u32 extmemparityerrdata;
-+ u32 extmemparityerrcnt;
-+ u32 extmemwrctrlandsize;
-+ u32 PAD[84];
-+ u32 workaround;
-+ u32 pwrctl; /* corerev >= 2 */
-+ u32 PAD[133];
-+ u32 sr_control; /* corerev >= 15 */
-+ u32 sr_status; /* corerev >= 15 */
-+ u32 sr_address; /* corerev >= 15 */
-+ u32 sr_data; /* corerev >= 15 */
-+};
-+
-+#define SOCRAMREGOFFS(_f) offsetof(struct sbsocramregs, _f)
-+
-+#define ARMCR4_CAP (0x04)
-+#define ARMCR4_BANKIDX (0x40)
-+#define ARMCR4_BANKINFO (0x44)
-+#define ARMCR4_BANKPDA (0x4C)
-+
-+#define ARMCR4_TCBBNB_MASK 0xf0
-+#define ARMCR4_TCBBNB_SHIFT 4
-+#define ARMCR4_TCBANB_MASK 0xf
-+#define ARMCR4_TCBANB_SHIFT 0
-+
-+#define ARMCR4_BSZ_MASK 0x3f
-+#define ARMCR4_BSZ_MULT 8192
-+
- struct brcmf_core_priv {
- struct brcmf_core pub;
- u32 wrapbase;
-@@ -443,10 +512,6 @@ static int brcmf_chip_cores_check(struct
- break;
- case BCMA_CORE_ARM_CR4:
- cpu_found = true;
-- if (ci->pub.rambase == 0) {
-- brcmf_err("RAM base not provided with ARM CR4 core\n");
-- return -ENOMEM;
-- }
- break;
- default:
- break;
-@@ -462,60 +527,160 @@ static int brcmf_chip_cores_check(struct
- brcmf_err("RAM core not provided with ARM CM3 core\n");
- return -ENODEV;
- }
-- if (!ci->pub.ramsize) {
-- brcmf_err("RAM size is undetermined\n");
-- return -ENOMEM;
-- }
- return 0;
- }
-
--static void brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci)
-+static u32 brcmf_chip_core_read32(struct brcmf_core_priv *core, u16 reg)
- {
-- switch (ci->pub.chip) {
-- case BRCM_CC_4329_CHIP_ID:
-- ci->pub.ramsize = BCM4329_RAMSIZE;
-- break;
-- case BRCM_CC_43143_CHIP_ID:
-- ci->pub.ramsize = BCM43143_RAMSIZE;
-- break;
-- case BRCM_CC_43241_CHIP_ID:
-- ci->pub.ramsize = 0x90000;
-- break;
-- case BRCM_CC_4330_CHIP_ID:
-- ci->pub.ramsize = 0x48000;
-- break;
-+ return core->chip->ops->read32(core->chip->ctx, core->pub.base + reg);
-+}
-+
-+static void brcmf_chip_core_write32(struct brcmf_core_priv *core,
-+ u16 reg, u32 val)
-+{
-+ core->chip->ops->write32(core->chip->ctx, core->pub.base + reg, val);
-+}
-+
-+static bool brcmf_chip_socram_banksize(struct brcmf_core_priv *core, u8 idx,
-+ u32 *banksize)
-+{
-+ u32 bankinfo;
-+ u32 bankidx = (SOCRAM_MEMTYPE_RAM << SOCRAM_BANKIDX_MEMTYPE_SHIFT);
-+
-+ bankidx |= idx;
-+ brcmf_chip_core_write32(core, SOCRAMREGOFFS(bankidx), bankidx);
-+ bankinfo = brcmf_chip_core_read32(core, SOCRAMREGOFFS(bankinfo));
-+ *banksize = (bankinfo & SOCRAM_BANKINFO_SZMASK) + 1;
-+ *banksize *= SOCRAM_BANKINFO_SZBASE;
-+ return !!(bankinfo & SOCRAM_BANKINFO_RETNTRAM_MASK);
-+}
-+
-+static void brcmf_chip_socram_ramsize(struct brcmf_core_priv *sr, u32 *ramsize,
-+ u32 *srsize)
-+{
-+ u32 coreinfo;
-+ uint nb, banksize, lss;
-+ bool retent;
-+ int i;
-+
-+ *ramsize = 0;
-+ *srsize = 0;
-+
-+ if (WARN_ON(sr->pub.rev < 4))
-+ return;
-+
-+ if (!brcmf_chip_iscoreup(&sr->pub))
-+ brcmf_chip_resetcore(&sr->pub, 0, 0, 0);
-+
-+ /* Get info for determining size */
-+ coreinfo = brcmf_chip_core_read32(sr, SOCRAMREGOFFS(coreinfo));
-+ nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
-+
-+ if ((sr->pub.rev <= 7) || (sr->pub.rev == 12)) {
-+ banksize = (coreinfo & SRCI_SRBSZ_MASK);
-+ lss = (coreinfo & SRCI_LSS_MASK) >> SRCI_LSS_SHIFT;
-+ if (lss != 0)
-+ nb--;
-+ *ramsize = nb * (1 << (banksize + SR_BSZ_BASE));
-+ if (lss != 0)
-+ *ramsize += (1 << ((lss - 1) + SR_BSZ_BASE));
-+ } else {
-+ nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
-+ for (i = 0; i < nb; i++) {
-+ retent = brcmf_chip_socram_banksize(sr, i, &banksize);
-+ *ramsize += banksize;
-+ if (retent)
-+ *srsize += banksize;
-+ }
-+ }
-+
-+ /* hardcoded save&restore memory sizes */
-+ switch (sr->chip->pub.chip) {
- case BRCM_CC_4334_CHIP_ID:
-- case BRCM_CC_43340_CHIP_ID:
-- ci->pub.ramsize = 0x80000;
-+ if (sr->chip->pub.chiprev < 2)
-+ *srsize = (32 * 1024);
- break;
-- case BRCM_CC_4335_CHIP_ID:
-- ci->pub.ramsize = 0xc0000;
-- ci->pub.rambase = 0x180000;
-- break;
-- case BRCM_CC_43362_CHIP_ID:
-- ci->pub.ramsize = 0x3c000;
-+ default:
- break;
-+ }
-+}
-+
-+/** Return the TCM-RAM size of the ARMCR4 core. */
-+static u32 brcmf_chip_tcm_ramsize(struct brcmf_core_priv *cr4)
-+{
-+ u32 corecap;
-+ u32 memsize = 0;
-+ u32 nab;
-+ u32 nbb;
-+ u32 totb;
-+ u32 bxinfo;
-+ u32 idx;
-+
-+ corecap = brcmf_chip_core_read32(cr4, ARMCR4_CAP);
-+
-+ nab = (corecap & ARMCR4_TCBANB_MASK) >> ARMCR4_TCBANB_SHIFT;
-+ nbb = (corecap & ARMCR4_TCBBNB_MASK) >> ARMCR4_TCBBNB_SHIFT;
-+ totb = nab + nbb;
-+
-+ for (idx = 0; idx < totb; idx++) {
-+ brcmf_chip_core_write32(cr4, ARMCR4_BANKIDX, idx);
-+ bxinfo = brcmf_chip_core_read32(cr4, ARMCR4_BANKINFO);
-+ memsize += ((bxinfo & ARMCR4_BSZ_MASK) + 1) * ARMCR4_BSZ_MULT;
-+ }
-+
-+ return memsize;
-+}
-+
-+static u32 brcmf_chip_tcm_rambase(struct brcmf_chip_priv *ci)
-+{
-+ switch (ci->pub.chip) {
- case BRCM_CC_4345_CHIP_ID:
-- ci->pub.ramsize = 0xc8000;
-- ci->pub.rambase = 0x198000;
-- break;
-+ return 0x198000;
-+ case BRCM_CC_4335_CHIP_ID:
- case BRCM_CC_4339_CHIP_ID:
- case BRCM_CC_4354_CHIP_ID:
- case BRCM_CC_4356_CHIP_ID:
- case BRCM_CC_43567_CHIP_ID:
- case BRCM_CC_43569_CHIP_ID:
- case BRCM_CC_43570_CHIP_ID:
-- ci->pub.ramsize = 0xc0000;
-- ci->pub.rambase = 0x180000;
-- break;
- case BRCM_CC_43602_CHIP_ID:
-- ci->pub.ramsize = 0xf0000;
-- ci->pub.rambase = 0x180000;
-- break;
-+ return 0x180000;
- default:
- brcmf_err("unknown chip: %s\n", ci->pub.name);
- break;
- }
-+ return 0;
-+}
-+
-+static int brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci)
-+{
-+ struct brcmf_core_priv *mem_core;
-+ struct brcmf_core *mem;
-+
-+ mem = brcmf_chip_get_core(&ci->pub, BCMA_CORE_ARM_CR4);
-+ if (mem) {
-+ mem_core = container_of(mem, struct brcmf_core_priv, pub);
-+ ci->pub.ramsize = brcmf_chip_tcm_ramsize(mem_core);
-+ ci->pub.rambase = brcmf_chip_tcm_rambase(ci);
-+ if (!ci->pub.rambase) {
-+ brcmf_err("RAM base not provided with ARM CR4 core\n");
-+ return -EINVAL;
-+ }
-+ } else {
-+ mem = brcmf_chip_get_core(&ci->pub, BCMA_CORE_INTERNAL_MEM);
-+ mem_core = container_of(mem, struct brcmf_core_priv, pub);
-+ brcmf_chip_socram_ramsize(mem_core, &ci->pub.ramsize,
-+ &ci->pub.srsize);
-+ }
-+ brcmf_dbg(INFO, "RAM: base=0x%x size=%d (0x%x) sr=%d (0x%x)\n",
-+ ci->pub.rambase, ci->pub.ramsize, ci->pub.ramsize,
-+ ci->pub.srsize, ci->pub.srsize);
-+
-+ if (!ci->pub.ramsize) {
-+ brcmf_err("RAM size is undetermined\n");
-+ return -ENOMEM;
-+ }
-+ return 0;
- }
-
- static u32 brcmf_chip_dmp_get_desc(struct brcmf_chip_priv *ci, u32 *eromaddr,
-@@ -668,6 +833,7 @@ static int brcmf_chip_recognition(struct
- struct brcmf_core *core;
- u32 regdata;
- u32 socitype;
-+ int ret;
-
- /* Get CC core rev
- * Chipid is assume to be at offset 0 from SI_ENUM_BASE
-@@ -720,9 +886,13 @@ static int brcmf_chip_recognition(struct
- return -ENODEV;
- }
-
-- brcmf_chip_get_raminfo(ci);
--
-- return brcmf_chip_cores_check(ci);
-+ ret = brcmf_chip_cores_check(ci);
-+ if (ret)
-+ return ret;
-+
-+ /* assure chip is passive for core access */
-+ brcmf_chip_set_passive(&ci->pub);
-+ return brcmf_chip_get_raminfo(ci);
- }
-
- static void brcmf_chip_disable_arm(struct brcmf_chip_priv *chip, u16 id)
-@@ -827,8 +997,6 @@ struct brcmf_chip *brcmf_chip_attach(voi
- if (err < 0)
- goto fail;
-
-- /* assure chip is passive for download */
-- brcmf_chip_set_passive(&chip->pub);
- return &chip->pub;
-
- fail:
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h
-@@ -30,7 +30,8 @@
- * @pmucaps: PMU capabilities.
- * @pmurev: PMU revision.
- * @rambase: RAM base address (only applicable for ARM CR4 chips).
-- * @ramsize: amount of RAM on chip.
-+ * @ramsize: amount of RAM on chip including retention.
-+ * @srsize: amount of retention RAM on chip.
- * @name: string representation of the chip identifier.
- */
- struct brcmf_chip {
-@@ -41,6 +42,7 @@ struct brcmf_chip {
- u32 pmurev;
- u32 rambase;
- u32 ramsize;
-+ u32 srsize;
- char name[8];
- };
-
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:32 +0100
-Subject: [PATCH] brcmfmac: take save&restore memory into account for SDIO
- shared info
-
-The firmware provides pointer to SDIO shared information at end of
-RAM during firmware initialization. End of RAM is obviously determined
-by the actual ram size, but part of that may be used for save&restore
-memory. In that case another location in RAM will hold the pointer.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -1067,44 +1067,47 @@ static inline bool brcmf_sdio_valid_shar
- static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
- struct sdpcm_shared *sh)
- {
-- u32 addr;
-+ u32 addr = 0;
- int rv;
- u32 shaddr = 0;
- struct sdpcm_shared_le sh_le;
- __le32 addr_le;
-
-- shaddr = bus->ci->rambase + bus->ci->ramsize - 4;
-+ sdio_claim_host(bus->sdiodev->func[1]);
-+ brcmf_sdio_bus_sleep(bus, false, false);
-
- /*
- * Read last word in socram to determine
- * address of sdpcm_shared structure
- */
-- sdio_claim_host(bus->sdiodev->func[1]);
-- brcmf_sdio_bus_sleep(bus, false, false);
-- rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4);
-- sdio_release_host(bus->sdiodev->func[1]);
-+ shaddr = bus->ci->rambase + bus->ci->ramsize - 4;
-+ if (!bus->ci->rambase && brcmf_chip_sr_capable(bus->ci))
-+ shaddr -= bus->ci->srsize;
-+ rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr,
-+ (u8 *)&addr_le, 4);
- if (rv < 0)
-- return rv;
--
-- addr = le32_to_cpu(addr_le);
--
-- brcmf_dbg(SDIO, "sdpcm_shared address 0x%08X\n", addr);
-+ goto fail;
-
- /*
- * Check if addr is valid.
- * NVRAM length at the end of memory should have been overwritten.
- */
-+ addr = le32_to_cpu(addr_le);
- if (!brcmf_sdio_valid_shared_address(addr)) {
-- brcmf_err("invalid sdpcm_shared address 0x%08X\n",
-- addr);
-- return -EINVAL;
-+ brcmf_err("invalid sdpcm_shared address 0x%08X\n", addr);
-+ rv = -EINVAL;
-+ goto fail;
- }
-
-+ brcmf_dbg(INFO, "sdpcm_shared address 0x%08X\n", addr);
-+
- /* Read hndrte_shared structure */
- rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le,
- sizeof(struct sdpcm_shared_le));
- if (rv < 0)
-- return rv;
-+ goto fail;
-+
-+ sdio_release_host(bus->sdiodev->func[1]);
-
- /* Endianness */
- sh->flags = le32_to_cpu(sh_le.flags);
-@@ -1121,8 +1124,13 @@ static int brcmf_sdio_readshared(struct
- sh->flags & SDPCM_SHARED_VERSION_MASK);
- return -EPROTO;
- }
--
- return 0;
-+
-+fail:
-+ brcmf_err("unable to obtain sdpcm_shared info: rv=%d (addr=0x%x)\n",
-+ rv, addr);
-+ sdio_release_host(bus->sdiodev->func[1]);
-+ return rv;
- }
-
- static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus)
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 11 Mar 2015 16:11:33 +0100
-Subject: [PATCH] brcmfmac: fix watchdog timer regression
-
-The watchdog timer is used to put the device in a low-power mode when
-it is idle for some time. This timer is stopped during that mode and
-should be restarted upon activity. This has been broken by commit
-d4150fced0365 ("brcmfmac: Simplify watchdog sleep."). This patch
-restores the behaviour as it was before that commit.
-
-Reported-by: Pontus Fuchs <pontusf@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -972,7 +972,6 @@ static int brcmf_sdio_clkctl(struct brcm
- brcmf_sdio_sdclk(bus, true);
- /* Now request HT Avail on the backplane */
- brcmf_sdio_htclk(bus, true, pendok);
-- brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
- break;
-
- case CLK_SDONLY:
-@@ -984,7 +983,6 @@ static int brcmf_sdio_clkctl(struct brcm
- else
- brcmf_err("request for %d -> %d\n",
- bus->clkstate, target);
-- brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
- break;
-
- case CLK_NONE:
-@@ -993,7 +991,6 @@ static int brcmf_sdio_clkctl(struct brcm
- brcmf_sdio_htclk(bus, false, false);
- /* Now remove the SD clock */
- brcmf_sdio_sdclk(bus, false);
-- brcmf_sdio_wd_timer(bus, 0);
- break;
- }
- #ifdef DEBUG
-@@ -1048,6 +1045,7 @@ end:
- brcmf_sdio_clkctl(bus, CLK_NONE, pendok);
- } else {
- brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok);
-+ brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
- }
- bus->sleeping = sleep;
- brcmf_dbg(SDIO, "new state %s\n",
-@@ -4242,6 +4240,7 @@ void brcmf_sdio_remove(struct brcmf_sdio
- if (bus->ci) {
- if (bus->sdiodev->state != BRCMF_SDIOD_NOMEDIUM) {
- sdio_claim_host(bus->sdiodev->func[1]);
-+ brcmf_sdio_wd_timer(bus, 0);
- brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
- /* Leave the device in state where it is
- * 'passive'. This is done by resetting all
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:21 +0100
-Subject: [PATCH] brcmfmac: avoid runtime-pm for sdio host controller
-
-Several host controllers supporting runtime-pm are causing issues
-with our sdio wireless cards because they disable the sdio interrupt
-upon going into runtime suspend. This patch avoids that by doing
-a pm_runtime_forbid() call during the probe. Tested with Sony Vaio
-Duo 13 which uses sdhci-acpi host controller.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -29,6 +29,7 @@
- #include <linux/mmc/host.h>
- #include <linux/platform_device.h>
- #include <linux/platform_data/brcmfmac-sdio.h>
-+#include <linux/pm_runtime.h>
- #include <linux/suspend.h>
- #include <linux/errno.h>
- #include <linux/module.h>
-@@ -1006,6 +1007,7 @@ static int brcmf_sdiod_remove(struct brc
- sg_free_table(&sdiodev->sgtable);
- sdiodev->sbwad = 0;
-
-+ pm_runtime_allow(sdiodev->func[1]->card->host->parent);
- return 0;
- }
-
-@@ -1074,7 +1076,7 @@ static int brcmf_sdiod_probe(struct brcm
- ret = -ENODEV;
- goto out;
- }
--
-+ pm_runtime_forbid(host->parent);
- out:
- if (ret)
- brcmf_sdiod_remove(sdiodev);
+++ /dev/null
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:22 +0100
-Subject: [PATCH] brcmfmac: Add necessary memory barriers for SDIO.
-
-SDIO uses a thread to handle all communication with the device,
-for this data is exchanged between threads. This data needs proper
-memory barriers to make sure that data "exchange" is going correct.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -507,8 +507,8 @@ struct brcmf_sdio {
-
- struct workqueue_struct *brcmf_wq;
- struct work_struct datawork;
-- atomic_t dpc_tskcnt;
-- atomic_t dpc_running;
-+ bool dpc_triggered;
-+ bool dpc_running;
-
- bool txoff; /* Transmit flow-controlled */
- struct brcmf_sdio_count sdcnt;
-@@ -2713,6 +2713,7 @@ static void brcmf_sdio_dpc(struct brcmf_
- err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf,
- bus->ctrl_frame_len);
- bus->ctrl_frame_err = err;
-+ wmb();
- bus->ctrl_frame_stat = false;
- }
- sdio_release_host(bus->sdiodev->func[1]);
-@@ -2734,6 +2735,7 @@ static void brcmf_sdio_dpc(struct brcmf_
- sdio_claim_host(bus->sdiodev->func[1]);
- if (bus->ctrl_frame_stat) {
- bus->ctrl_frame_err = -ENODEV;
-+ wmb();
- bus->ctrl_frame_stat = false;
- brcmf_sdio_wait_event_wakeup(bus);
- }
-@@ -2744,7 +2746,7 @@ static void brcmf_sdio_dpc(struct brcmf_
- (!atomic_read(&bus->fcstate) &&
- brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
- data_ok(bus))) {
-- atomic_inc(&bus->dpc_tskcnt);
-+ bus->dpc_triggered = true;
- }
- }
-
-@@ -2940,6 +2942,7 @@ brcmf_sdio_bus_txctl(struct device *dev,
- /* Send from dpc */
- bus->ctrl_frame_buf = msg;
- bus->ctrl_frame_len = msglen;
-+ wmb();
- bus->ctrl_frame_stat = true;
-
- brcmf_sdio_trigger_dpc(bus);
-@@ -2958,6 +2961,7 @@ brcmf_sdio_bus_txctl(struct device *dev,
- if (!ret) {
- brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",
- bus->ctrl_frame_err);
-+ rmb();
- ret = bus->ctrl_frame_err;
- }
-
-@@ -3526,8 +3530,8 @@ done:
-
- void brcmf_sdio_trigger_dpc(struct brcmf_sdio *bus)
- {
-- if (atomic_read(&bus->dpc_tskcnt) == 0) {
-- atomic_inc(&bus->dpc_tskcnt);
-+ if (!bus->dpc_triggered) {
-+ bus->dpc_triggered = true;
- queue_work(bus->brcmf_wq, &bus->datawork);
- }
- }
-@@ -3558,7 +3562,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *b
- if (!bus->intr)
- brcmf_err("isr w/o interrupt configured!\n");
-
-- atomic_inc(&bus->dpc_tskcnt);
-+ bus->dpc_triggered = true;
- queue_work(bus->brcmf_wq, &bus->datawork);
- }
-
-@@ -3578,7 +3582,7 @@ static void brcmf_sdio_bus_watchdog(stru
- if (!bus->intr ||
- (bus->sdcnt.intrcount == bus->sdcnt.lastintrs)) {
-
-- if (atomic_read(&bus->dpc_tskcnt) == 0) {
-+ if (!bus->dpc_triggered) {
- u8 devpend;
-
- sdio_claim_host(bus->sdiodev->func[1]);
-@@ -3596,7 +3600,7 @@ static void brcmf_sdio_bus_watchdog(stru
- bus->sdcnt.pollcnt++;
- atomic_set(&bus->ipend, 1);
-
-- atomic_inc(&bus->dpc_tskcnt);
-+ bus->dpc_triggered = true;
- queue_work(bus->brcmf_wq, &bus->datawork);
- }
- }
-@@ -3623,17 +3627,21 @@ static void brcmf_sdio_bus_watchdog(stru
- #endif /* DEBUG */
-
- /* On idle timeout clear activity flag and/or turn off clock */
-- if ((atomic_read(&bus->dpc_tskcnt) == 0) &&
-- (atomic_read(&bus->dpc_running) == 0) &&
-- (bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
-- bus->idlecount++;
-- if (bus->idlecount > bus->idletime) {
-- brcmf_dbg(SDIO, "idle\n");
-- sdio_claim_host(bus->sdiodev->func[1]);
-- brcmf_sdio_wd_timer(bus, 0);
-+ if (!bus->dpc_triggered) {
-+ rmb();
-+ if ((!bus->dpc_running) && (bus->idletime > 0) &&
-+ (bus->clkstate == CLK_AVAIL)) {
-+ bus->idlecount++;
-+ if (bus->idlecount > bus->idletime) {
-+ brcmf_dbg(SDIO, "idle\n");
-+ sdio_claim_host(bus->sdiodev->func[1]);
-+ brcmf_sdio_wd_timer(bus, 0);
-+ bus->idlecount = 0;
-+ brcmf_sdio_bus_sleep(bus, true, false);
-+ sdio_release_host(bus->sdiodev->func[1]);
-+ }
-+ } else {
- bus->idlecount = 0;
-- brcmf_sdio_bus_sleep(bus, true, false);
-- sdio_release_host(bus->sdiodev->func[1]);
- }
- } else {
- bus->idlecount = 0;
-@@ -3645,13 +3653,14 @@ static void brcmf_sdio_dataworker(struct
- struct brcmf_sdio *bus = container_of(work, struct brcmf_sdio,
- datawork);
-
-- while (atomic_read(&bus->dpc_tskcnt)) {
-- atomic_set(&bus->dpc_running, 1);
-- atomic_set(&bus->dpc_tskcnt, 0);
-+ bus->dpc_running = true;
-+ wmb();
-+ while (ACCESS_ONCE(bus->dpc_triggered)) {
-+ bus->dpc_triggered = false;
- brcmf_sdio_dpc(bus);
- bus->idlecount = 0;
-- atomic_set(&bus->dpc_running, 0);
- }
-+ bus->dpc_running = false;
- if (brcmf_sdiod_freezing(bus->sdiodev)) {
- brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DOWN);
- brcmf_sdiod_try_freeze(bus->sdiodev);
-@@ -4144,8 +4153,8 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
- bus->watchdog_tsk = NULL;
- }
- /* Initialize DPC thread */
-- atomic_set(&bus->dpc_tskcnt, 0);
-- atomic_set(&bus->dpc_running, 0);
-+ bus->dpc_triggered = false;
-+ bus->dpc_running = false;
-
- /* Assign bus interface call back */
- bus->sdiodev->bus_if->dev = bus->sdiodev->dev;
+++ /dev/null
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:24 +0100
-Subject: [PATCH] brcmfmac: Remove unnecessary new-line in pcie console
- logging.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -651,10 +651,9 @@ static void brcmf_pcie_bus_console_read(
- console->log_str[console->log_idx] = ch;
- console->log_idx++;
- }
--
- if (ch == '\n') {
- console->log_str[console->log_idx] = 0;
-- brcmf_dbg(PCIE, "CONSOLE: %s\n", console->log_str);
-+ brcmf_dbg(PCIE, "CONSOLE: %s", console->log_str);
- console->log_idx = 0;
- }
- }
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:25 +0100
-Subject: [PATCH] brcmfmac: add MODULE_FIRMWARE() macros for bcm4356 PCIe
- device
-
-The BCM4356 PCIe wireless device was added recently but overlooked
-the fact that the MODULE_FIRMWARE() macros were missing for the
-firmwares needed by this device.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -189,6 +189,8 @@ MODULE_FIRMWARE(BRCMF_PCIE_43602_FW_NAME
- MODULE_FIRMWARE(BRCMF_PCIE_43602_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4354_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4354_NVRAM_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME);
-
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:26 +0100
-Subject: [PATCH] brcmfmac: add support for BCM43430 SDIO chipset
-
-This patch added support for the BCM43430 802.11n SDIO chipset.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1098,6 +1098,7 @@ static const struct sdio_device_id brcmf
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43341),
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43362),
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339),
-+ BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43430),
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4345),
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354),
- { /* end: all zeroes */ }
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -600,6 +600,12 @@ static void brcmf_chip_socram_ramsize(st
- if (sr->chip->pub.chiprev < 2)
- *srsize = (32 * 1024);
- break;
-+ case BRCM_CC_43430_CHIP_ID:
-+ /* assume sr for now as we can not check
-+ * firmware sr capability at this point.
-+ */
-+ *srsize = (64 * 1024);
-+ break;
- default:
- break;
- }
-@@ -1072,6 +1078,7 @@ static void
- brcmf_chip_cm3_set_passive(struct brcmf_chip_priv *chip)
- {
- struct brcmf_core *core;
-+ struct brcmf_core_priv *sr;
-
- brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CM3);
- core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_80211);
-@@ -1081,6 +1088,13 @@ brcmf_chip_cm3_set_passive(struct brcmf_
- D11_BCMA_IOCTL_PHYCLOCKEN);
- core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_INTERNAL_MEM);
- brcmf_chip_resetcore(core, 0, 0, 0);
-+
-+ /* disable bank #3 remap for this device */
-+ if (chip->pub.chip == BRCM_CC_43430_CHIP_ID) {
-+ sr = container_of(core, struct brcmf_core_priv, pub);
-+ brcmf_chip_core_write32(sr, SOCRAMREGOFFS(bankidx), 3);
-+ brcmf_chip_core_write32(sr, SOCRAMREGOFFS(bankpda), 0);
-+ }
- }
-
- static bool brcmf_chip_cm3_set_active(struct brcmf_chip_priv *chip)
-@@ -1188,6 +1202,10 @@ bool brcmf_chip_sr_capable(struct brcmf_
- addr = CORE_CC_REG(base, chipcontrol_data);
- reg = chip->ops->read32(chip->ctx, addr);
- return (reg & pmu_cc3_mask) != 0;
-+ case BRCM_CC_43430_CHIP_ID:
-+ addr = CORE_CC_REG(base, sr_control1);
-+ reg = chip->ops->read32(chip->ctx, addr);
-+ return reg != 0;
- default:
- addr = CORE_CC_REG(base, pmucapabilities_ext);
- reg = chip->ops->read32(chip->ctx, addr);
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -615,6 +615,8 @@ static const struct sdiod_drive_str sdio
- #define BCM43362_NVRAM_NAME "brcm/brcmfmac43362-sdio.txt"
- #define BCM4339_FIRMWARE_NAME "brcm/brcmfmac4339-sdio.bin"
- #define BCM4339_NVRAM_NAME "brcm/brcmfmac4339-sdio.txt"
-+#define BCM43430_FIRMWARE_NAME "brcm/brcmfmac43430-sdio.bin"
-+#define BCM43430_NVRAM_NAME "brcm/brcmfmac43430-sdio.txt"
- #define BCM4345_FIRMWARE_NAME "brcm/brcmfmac4345-sdio.bin"
- #define BCM4345_NVRAM_NAME "brcm/brcmfmac4345-sdio.txt"
- #define BCM4354_FIRMWARE_NAME "brcm/brcmfmac4354-sdio.bin"
-@@ -640,6 +642,8 @@ MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM43362_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4339_NVRAM_NAME);
-+MODULE_FIRMWARE(BCM43430_FIRMWARE_NAME);
-+MODULE_FIRMWARE(BCM43430_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4345_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4345_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME);
-@@ -671,6 +675,7 @@ static const struct brcmf_firmware_names
- { BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) },
- { BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
- { BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
-+ { BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43430) },
- { BRCM_CC_4345_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4345) },
- { BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) }
- };
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -37,6 +37,7 @@
- #define BRCM_CC_43362_CHIP_ID 43362
- #define BRCM_CC_4335_CHIP_ID 0x4335
- #define BRCM_CC_4339_CHIP_ID 0x4339
-+#define BRCM_CC_43430_CHIP_ID 43430
- #define BRCM_CC_4345_CHIP_ID 0x4345
- #define BRCM_CC_4354_CHIP_ID 0x4354
- #define BRCM_CC_4356_CHIP_ID 0x4356
---- a/drivers/net/wireless/brcm80211/include/chipcommon.h
-+++ b/drivers/net/wireless/brcm80211/include/chipcommon.h
-@@ -183,7 +183,14 @@ struct chipcregs {
- u8 uart1lsr;
- u8 uart1msr;
- u8 uart1scratch;
-- u32 PAD[126];
-+ u32 PAD[62];
-+
-+ /* save/restore, corerev >= 48 */
-+ u32 sr_capability; /* 0x500 */
-+ u32 sr_control0; /* 0x504 */
-+ u32 sr_control1; /* 0x508 */
-+ u32 gpio_control; /* 0x50C */
-+ u32 PAD[60];
-
- /* PMU registers (corerev >= 20) */
- u32 pmucontrol; /* 0x600 */
---- a/include/linux/mmc/sdio_ids.h
-+++ b/include/linux/mmc/sdio_ids.h
-@@ -33,6 +33,7 @@
- #define SDIO_DEVICE_ID_BROADCOM_43341 0xa94d
- #define SDIO_DEVICE_ID_BROADCOM_4335_4339 0x4335
- #define SDIO_DEVICE_ID_BROADCOM_43362 0xa962
-+#define SDIO_DEVICE_ID_BROADCOM_43430 0xa9a6
- #define SDIO_DEVICE_ID_BROADCOM_4345 0x4345
- #define SDIO_DEVICE_ID_BROADCOM_4354 0x4354
-
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:27 +0100
-Subject: [PATCH] brcmfmac: only support the BCM43455/7 device
-
-Recently support was added for the BCM4345 SDIO chipset by
-commit 9c51026509d7 ("brcmfmac: Add support for BCM4345 SDIO chipset")
-however this was verified using a BCM43455 device, which is
-a more recent revision of the chip. This patch assure that
-older revisions are not probed as they would fail.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Syed Asifful Dayyan <syedd@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -617,8 +617,8 @@ static const struct sdiod_drive_str sdio
- #define BCM4339_NVRAM_NAME "brcm/brcmfmac4339-sdio.txt"
- #define BCM43430_FIRMWARE_NAME "brcm/brcmfmac43430-sdio.bin"
- #define BCM43430_NVRAM_NAME "brcm/brcmfmac43430-sdio.txt"
--#define BCM4345_FIRMWARE_NAME "brcm/brcmfmac4345-sdio.bin"
--#define BCM4345_NVRAM_NAME "brcm/brcmfmac4345-sdio.txt"
-+#define BCM43455_FIRMWARE_NAME "brcm/brcmfmac43455-sdio.bin"
-+#define BCM43455_NVRAM_NAME "brcm/brcmfmac43455-sdio.txt"
- #define BCM4354_FIRMWARE_NAME "brcm/brcmfmac4354-sdio.bin"
- #define BCM4354_NVRAM_NAME "brcm/brcmfmac4354-sdio.txt"
-
-@@ -644,8 +644,8 @@ MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4339_NVRAM_NAME);
- MODULE_FIRMWARE(BCM43430_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM43430_NVRAM_NAME);
--MODULE_FIRMWARE(BCM4345_FIRMWARE_NAME);
--MODULE_FIRMWARE(BCM4345_NVRAM_NAME);
-+MODULE_FIRMWARE(BCM43455_FIRMWARE_NAME);
-+MODULE_FIRMWARE(BCM43455_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4354_NVRAM_NAME);
-
-@@ -676,7 +676,7 @@ static const struct brcmf_firmware_names
- { BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
- { BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
- { BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43430) },
-- { BRCM_CC_4345_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4345) },
-+ { BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, BRCMF_FIRMWARE_NVRAM(BCM43455) },
- { BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) }
- };
-
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 18 Mar 2015 13:25:28 +0100
-Subject: [PATCH] brcmfmac: remove support for unreleased BCM4354 PCIe
-
-There are no known BCM4354 PCIe devices released so removing
-support from the driver until proven otherwise.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -47,8 +47,6 @@ enum brcmf_pcie_state {
-
- #define BRCMF_PCIE_43602_FW_NAME "brcm/brcmfmac43602-pcie.bin"
- #define BRCMF_PCIE_43602_NVRAM_NAME "brcm/brcmfmac43602-pcie.txt"
--#define BRCMF_PCIE_4354_FW_NAME "brcm/brcmfmac4354-pcie.bin"
--#define BRCMF_PCIE_4354_NVRAM_NAME "brcm/brcmfmac4354-pcie.txt"
- #define BRCMF_PCIE_4356_FW_NAME "brcm/brcmfmac4356-pcie.bin"
- #define BRCMF_PCIE_4356_NVRAM_NAME "brcm/brcmfmac4356-pcie.txt"
- #define BRCMF_PCIE_43570_FW_NAME "brcm/brcmfmac43570-pcie.bin"
-@@ -187,8 +185,6 @@ enum brcmf_pcie_state {
-
- MODULE_FIRMWARE(BRCMF_PCIE_43602_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43602_NVRAM_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4354_FW_NAME);
--MODULE_FIRMWARE(BRCMF_PCIE_4354_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME);
-@@ -1327,10 +1323,6 @@ static int brcmf_pcie_get_fwnames(struct
- fw_name = BRCMF_PCIE_43602_FW_NAME;
- nvram_name = BRCMF_PCIE_43602_NVRAM_NAME;
- break;
-- case BRCM_CC_4354_CHIP_ID:
-- fw_name = BRCMF_PCIE_4354_FW_NAME;
-- nvram_name = BRCMF_PCIE_4354_NVRAM_NAME;
-- break;
- case BRCM_CC_4356_CHIP_ID:
- fw_name = BRCMF_PCIE_4356_FW_NAME;
- nvram_name = BRCMF_PCIE_4356_NVRAM_NAME;
-@@ -1855,7 +1847,6 @@ cleanup:
- PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 }
-
- static struct pci_device_id brcmf_pcie_devid_table[] = {
-- BRCMF_PCIE_DEVICE(BRCM_PCIE_4354_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_4356_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID),
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Fri, 20 Mar 2015 22:18:17 +0100
-Subject: [PATCH] brcmfmac: disable MBSS feature for BCM43362
-
-The BCM43362 firmware falsely reports it is capable of providing
-MBSS. As a result AP mode no longer works for this device. Therefor
-disable MBSS in the driver for this chipset.
-
-Cc: stable@vger.kernel.org # 3.19.y
-Reported-by: Jorg Krause <jkrause@posteo.de>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-@@ -126,7 +126,8 @@ void brcmf_feat_attach(struct brcmf_pub
- brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan");
- if (drvr->bus_if->wowl_supported)
- brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
-- brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
-+ if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID)
-+ brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
-
- /* set chip related quirks */
- switch (drvr->bus_if->chip) {
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:24 +0200
-Subject: [PATCH] brcmfmac: use static superset of channels for wiphy
- bands
-
-The driver was constructing a list of channels per wiphy band
-by querying the device. This list is not what the hardware is
-able to do as it is already filtered by the country setting in
-the device. As user-space may change the country this would
-require updating the channel list which is not recommended [1].
-This patch introduces a superset of channels. The individual
-channels are disabled appropriately by querying the device.
-
-[1] http://mid.gmane.org/1426706320.3001.21.camel@sipsolutions.net
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -129,13 +129,47 @@ static struct ieee80211_rate __wl_rates[
- RATETAB_ENT(BRCM_RATE_54M, 0),
- };
-
--#define wl_a_rates (__wl_rates + 4)
--#define wl_a_rates_size 8
- #define wl_g_rates (__wl_rates + 0)
--#define wl_g_rates_size 12
-+#define wl_g_rates_size ARRAY_SIZE(__wl_rates)
-+#define wl_a_rates (__wl_rates + 4)
-+#define wl_a_rates_size (wl_g_rates_size - 4)
-+
-+#define CHAN2G(_channel, _freq) { \
-+ .band = IEEE80211_BAND_2GHZ, \
-+ .center_freq = (_freq), \
-+ .hw_value = (_channel), \
-+ .flags = IEEE80211_CHAN_DISABLED, \
-+ .max_antenna_gain = 0, \
-+ .max_power = 30, \
-+}
-+
-+#define CHAN5G(_channel) { \
-+ .band = IEEE80211_BAND_5GHZ, \
-+ .center_freq = 5000 + (5 * (_channel)), \
-+ .hw_value = (_channel), \
-+ .flags = IEEE80211_CHAN_DISABLED, \
-+ .max_antenna_gain = 0, \
-+ .max_power = 30, \
-+}
-+
-+static struct ieee80211_channel __wl_2ghz_channels[] = {
-+ CHAN2G(1, 2412), CHAN2G(2, 2417), CHAN2G(3, 2422), CHAN2G(4, 2427),
-+ CHAN2G(5, 2432), CHAN2G(6, 2437), CHAN2G(7, 2442), CHAN2G(8, 2447),
-+ CHAN2G(9, 2452), CHAN2G(10, 2457), CHAN2G(11, 2462), CHAN2G(12, 2467),
-+ CHAN2G(13, 2472), CHAN2G(14, 2484)
-+};
-+
-+static struct ieee80211_channel __wl_5ghz_channels[] = {
-+ CHAN5G(34), CHAN5G(36), CHAN5G(38), CHAN5G(40), CHAN5G(42),
-+ CHAN5G(44), CHAN5G(46), CHAN5G(48), CHAN5G(52), CHAN5G(56),
-+ CHAN5G(60), CHAN5G(64), CHAN5G(100), CHAN5G(104), CHAN5G(108),
-+ CHAN5G(112), CHAN5G(116), CHAN5G(120), CHAN5G(124), CHAN5G(128),
-+ CHAN5G(132), CHAN5G(136), CHAN5G(140), CHAN5G(144), CHAN5G(149),
-+ CHAN5G(153), CHAN5G(157), CHAN5G(161), CHAN5G(165)
-+};
-
- /* Band templates duplicated per wiphy. The channel info
-- * is filled in after querying the device.
-+ * above is added to the band during setup.
- */
- static const struct ieee80211_supported_band __wl_band_2ghz = {
- .band = IEEE80211_BAND_2GHZ,
-@@ -143,7 +177,7 @@ static const struct ieee80211_supported_
- .n_bitrates = wl_g_rates_size,
- };
-
--static const struct ieee80211_supported_band __wl_band_5ghz_a = {
-+static const struct ieee80211_supported_band __wl_band_5ghz = {
- .band = IEEE80211_BAND_5GHZ,
- .bitrates = wl_a_rates,
- .n_bitrates = wl_a_rates_size,
-@@ -5252,40 +5286,6 @@ dongle_scantime_out:
- return err;
- }
-
--/* Filter the list of channels received from firmware counting only
-- * the 20MHz channels. The wiphy band data only needs those which get
-- * flagged to indicate if they can take part in higher bandwidth.
-- */
--static void brcmf_count_20mhz_channels(struct brcmf_cfg80211_info *cfg,
-- struct brcmf_chanspec_list *chlist,
-- u32 chcnt[])
--{
-- u32 total = le32_to_cpu(chlist->count);
-- struct brcmu_chan ch;
-- int i;
--
-- for (i = 0; i < total; i++) {
-- ch.chspec = (u16)le32_to_cpu(chlist->element[i]);
-- cfg->d11inf.decchspec(&ch);
--
-- /* Firmware gives a ordered list. We skip non-20MHz
-- * channels is 2G. For 5G we can abort upon reaching
-- * a non-20MHz channel in the list.
-- */
-- if (ch.bw != BRCMU_CHAN_BW_20) {
-- if (ch.band == BRCMU_CHAN_BAND_5G)
-- break;
-- else
-- continue;
-- }
--
-- if (ch.band == BRCMU_CHAN_BAND_2G)
-- chcnt[0] += 1;
-- else if (ch.band == BRCMU_CHAN_BAND_5G)
-- chcnt[1] += 1;
-- }
--}
--
- static void brcmf_update_bw40_channel_flag(struct ieee80211_channel *channel,
- struct brcmu_chan *ch)
- {
-@@ -5321,7 +5321,6 @@ static int brcmf_construct_chaninfo(stru
- u32 i, j;
- u32 total;
- u32 chaninfo;
-- u32 chcnt[2] = { 0, 0 };
- u32 index;
-
- pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL);
-@@ -5338,42 +5337,15 @@ static int brcmf_construct_chaninfo(stru
- goto fail_pbuf;
- }
-
-- brcmf_count_20mhz_channels(cfg, list, chcnt);
- wiphy = cfg_to_wiphy(cfg);
-- if (chcnt[0]) {
-- band = kmemdup(&__wl_band_2ghz, sizeof(__wl_band_2ghz),
-- GFP_KERNEL);
-- if (band == NULL) {
-- err = -ENOMEM;
-- goto fail_pbuf;
-- }
-- band->channels = kcalloc(chcnt[0], sizeof(*channel),
-- GFP_KERNEL);
-- if (band->channels == NULL) {
-- kfree(band);
-- err = -ENOMEM;
-- goto fail_pbuf;
-- }
-- band->n_channels = 0;
-- wiphy->bands[IEEE80211_BAND_2GHZ] = band;
-- }
-- if (chcnt[1]) {
-- band = kmemdup(&__wl_band_5ghz_a, sizeof(__wl_band_5ghz_a),
-- GFP_KERNEL);
-- if (band == NULL) {
-- err = -ENOMEM;
-- goto fail_band2g;
-- }
-- band->channels = kcalloc(chcnt[1], sizeof(*channel),
-- GFP_KERNEL);
-- if (band->channels == NULL) {
-- kfree(band);
-- err = -ENOMEM;
-- goto fail_band2g;
-- }
-- band->n_channels = 0;
-- wiphy->bands[IEEE80211_BAND_5GHZ] = band;
-- }
-+ band = wiphy->bands[IEEE80211_BAND_2GHZ];
-+ if (band)
-+ for (i = 0; i < band->n_channels; i++)
-+ band->channels[i].flags = IEEE80211_CHAN_DISABLED;
-+ band = wiphy->bands[IEEE80211_BAND_5GHZ];
-+ if (band)
-+ for (i = 0; i < band->n_channels; i++)
-+ band->channels[i].flags = IEEE80211_CHAN_DISABLED;
-
- total = le32_to_cpu(list->count);
- for (i = 0; i < total; i++) {
-@@ -5388,6 +5360,8 @@ static int brcmf_construct_chaninfo(stru
- brcmf_err("Invalid channel Spec. 0x%x.\n", ch.chspec);
- continue;
- }
-+ if (!band)
-+ continue;
- if (!(bw_cap[band->band] & WLC_BW_40MHZ_BIT) &&
- ch.bw == BRCMU_CHAN_BW_40)
- continue;
-@@ -5415,9 +5389,9 @@ static int brcmf_construct_chaninfo(stru
- } else if (ch.bw == BRCMU_CHAN_BW_40) {
- brcmf_update_bw40_channel_flag(&channel[index], &ch);
- } else {
-- /* disable other bandwidths for now as mentioned
-- * order assure they are enabled for subsequent
-- * chanspecs.
-+ /* enable the channel and disable other bandwidths
-+ * for now as mentioned order assure they are enabled
-+ * for subsequent chanspecs.
- */
- channel[index].flags = IEEE80211_CHAN_NO_HT40 |
- IEEE80211_CHAN_NO_80MHZ;
-@@ -5436,16 +5410,8 @@ static int brcmf_construct_chaninfo(stru
- IEEE80211_CHAN_NO_IR;
- }
- }
-- if (index == band->n_channels)
-- band->n_channels++;
- }
-- kfree(pbuf);
-- return 0;
-
--fail_band2g:
-- kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
-- kfree(wiphy->bands[IEEE80211_BAND_2GHZ]);
-- wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
- fail_pbuf:
- kfree(pbuf);
- return err;
-@@ -5778,7 +5744,12 @@ static void brcmf_wiphy_wowl_params(stru
-
- static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
- {
-+ struct ieee80211_supported_band *band;
- struct ieee80211_iface_combination ifc_combo;
-+ __le32 bandlist[3];
-+ u32 n_bands;
-+ int err, i;
-+
- wiphy->max_scan_ssids = WL_NUM_SCAN_MAX;
- wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
- wiphy->max_num_pmkids = WL_NUM_PMKIDS_MAX;
-@@ -5820,7 +5791,52 @@ static int brcmf_setup_wiphy(struct wiph
- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL))
- brcmf_wiphy_wowl_params(wiphy);
-
-- return brcmf_setup_wiphybands(wiphy);
-+ err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BANDLIST, &bandlist,
-+ sizeof(bandlist));
-+ if (err) {
-+ brcmf_err("could not obtain band info: err=%d\n", err);
-+ return err;
-+ }
-+ /* first entry in bandlist is number of bands */
-+ n_bands = le32_to_cpu(bandlist[0]);
-+ for (i = 1; i <= n_bands && i < ARRAY_SIZE(bandlist); i++) {
-+ if (bandlist[i] == cpu_to_le32(WLC_BAND_2G)) {
-+ band = kmemdup(&__wl_band_2ghz, sizeof(__wl_band_2ghz),
-+ GFP_KERNEL);
-+ if (!band)
-+ return -ENOMEM;
-+
-+ band->channels = kmemdup(&__wl_2ghz_channels,
-+ sizeof(__wl_2ghz_channels),
-+ GFP_KERNEL);
-+ if (!band->channels) {
-+ kfree(band);
-+ return -ENOMEM;
-+ }
-+
-+ band->n_channels = ARRAY_SIZE(__wl_2ghz_channels);
-+ wiphy->bands[IEEE80211_BAND_2GHZ] = band;
-+ }
-+ if (bandlist[i] == cpu_to_le32(WLC_BAND_5G)) {
-+ band = kmemdup(&__wl_band_5ghz, sizeof(__wl_band_5ghz),
-+ GFP_KERNEL);
-+ if (!band)
-+ return -ENOMEM;
-+
-+ band->channels = kmemdup(&__wl_5ghz_channels,
-+ sizeof(__wl_5ghz_channels),
-+ GFP_KERNEL);
-+ if (!band->channels) {
-+ kfree(band);
-+ return -ENOMEM;
-+ }
-+
-+ band->n_channels = ARRAY_SIZE(__wl_5ghz_channels);
-+ wiphy->bands[IEEE80211_BAND_5GHZ] = band;
-+ }
-+ }
-+ err = brcmf_setup_wiphybands(wiphy);
-+ return err;
- }
-
- static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
-@@ -6011,6 +6027,9 @@ static void brcmf_cfg80211_reg_notifier(
-
- static void brcmf_free_wiphy(struct wiphy *wiphy)
- {
-+ if (!wiphy)
-+ return;
-+
- kfree(wiphy->iface_combinations);
- if (wiphy->bands[IEEE80211_BAND_2GHZ]) {
- kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:25 +0200
-Subject: [PATCH] brcmfmac: update wiphy band information upon updating
- regulatory domain
-
-When change the country code the available channels may change. So
-the wiphy bands should be updated accordingly.
-
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -6022,7 +6022,11 @@ static void brcmf_cfg80211_reg_notifier(
- memset(&ccreq, 0, sizeof(ccreq));
- ccreq.rev = cpu_to_le32(-1);
- memcpy(ccreq.ccode, req->alpha2, sizeof(req->alpha2));
-- brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq));
-+ if (brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq))) {
-+ brcmf_err("firmware rejected country setting\n");
-+ return;
-+ }
-+ brcmf_setup_wiphybands(wiphy);
- }
-
- static void brcmf_free_wiphy(struct wiphy *wiphy)
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:26 +0200
-Subject: [PATCH] brcmfmac: add description for feature flags
-
-Some feature flags were not described in the header file. Adding
-the description.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-@@ -19,7 +19,9 @@
- /*
- * Features:
- *
-+ * MBSS: multiple BSSID support (eg. guest network in AP mode).
- * MCHAN: multi-channel for concurrent P2P.
-+ * WOWL: Wake-On-WLAN.
- */
- #define BRCMF_FEAT_LIST \
- BRCMF_FEAT_DEF(MBSS) \
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:27 +0200
-Subject: [PATCH] brcmfmac: make scheduled scan support conditional
-
-The scheduled scan support depends on firmware supporting the PNO
-feature. This feature is optional so add a feature flag for this
-in the driver and announce scheduled scan support accordingly.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -5782,7 +5782,8 @@ static int brcmf_setup_wiphy(struct wiph
- wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM;
- wiphy->mgmt_stypes = brcmf_txrx_stypes;
- wiphy->max_remain_on_channel_duration = 5000;
-- brcmf_wiphy_pno_params(wiphy);
-+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO))
-+ brcmf_wiphy_pno_params(wiphy);
-
- /* vendor commands/events support */
- wiphy->vendor_commands = brcmf_vendor_cmds;
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-@@ -124,6 +124,7 @@ void brcmf_feat_attach(struct brcmf_pub
- struct brcmf_if *ifp = drvr->iflist[0];
-
- brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan");
-+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_PNO, "pfn");
- if (drvr->bus_if->wowl_supported)
- brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
- if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID)
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-@@ -21,11 +21,13 @@
- *
- * MBSS: multiple BSSID support (eg. guest network in AP mode).
- * MCHAN: multi-channel for concurrent P2P.
-+ * PNO: preferred network offload.
- * WOWL: Wake-On-WLAN.
- */
- #define BRCMF_FEAT_LIST \
- BRCMF_FEAT_DEF(MBSS) \
- BRCMF_FEAT_DEF(MCHAN) \
-+ BRCMF_FEAT_DEF(PNO) \
- BRCMF_FEAT_DEF(WOWL)
- /*
- * Quirks:
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:28 +0200
-Subject: [PATCH] brcmfmac: add support for BCM4324 rev B5 chipset
-
-This patch adds support for the BCM4324 B5 revision. This device
-is similar to BCM43241 from driver and firmware perspective. It
-is known to be used in Lenovo Thinkpad Tablet devices.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -601,6 +601,8 @@ static const struct sdiod_drive_str sdio
- #define BCM43241B0_NVRAM_NAME "brcm/brcmfmac43241b0-sdio.txt"
- #define BCM43241B4_FIRMWARE_NAME "brcm/brcmfmac43241b4-sdio.bin"
- #define BCM43241B4_NVRAM_NAME "brcm/brcmfmac43241b4-sdio.txt"
-+#define BCM43241B5_FIRMWARE_NAME "brcm/brcmfmac43241b5-sdio.bin"
-+#define BCM43241B5_NVRAM_NAME "brcm/brcmfmac43241b5-sdio.txt"
- #define BCM4329_FIRMWARE_NAME "brcm/brcmfmac4329-sdio.bin"
- #define BCM4329_NVRAM_NAME "brcm/brcmfmac4329-sdio.txt"
- #define BCM4330_FIRMWARE_NAME "brcm/brcmfmac4330-sdio.bin"
-@@ -628,6 +630,8 @@ MODULE_FIRMWARE(BCM43241B0_FIRMWARE_NAME
- MODULE_FIRMWARE(BCM43241B0_NVRAM_NAME);
- MODULE_FIRMWARE(BCM43241B4_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM43241B4_NVRAM_NAME);
-+MODULE_FIRMWARE(BCM43241B5_FIRMWARE_NAME);
-+MODULE_FIRMWARE(BCM43241B5_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4329_FIRMWARE_NAME);
- MODULE_FIRMWARE(BCM4329_NVRAM_NAME);
- MODULE_FIRMWARE(BCM4330_FIRMWARE_NAME);
-@@ -667,7 +671,8 @@ enum brcmf_firmware_type {
- static const struct brcmf_firmware_names brcmf_fwname_data[] = {
- { BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43143) },
- { BRCM_CC_43241_CHIP_ID, 0x0000001F, BRCMF_FIRMWARE_NVRAM(BCM43241B0) },
-- { BRCM_CC_43241_CHIP_ID, 0xFFFFFFE0, BRCMF_FIRMWARE_NVRAM(BCM43241B4) },
-+ { BRCM_CC_43241_CHIP_ID, 0x00000020, BRCMF_FIRMWARE_NVRAM(BCM43241B4) },
-+ { BRCM_CC_43241_CHIP_ID, 0xFFFFFFC0, BRCMF_FIRMWARE_NVRAM(BCM43241B5) },
- { BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) },
- { BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) },
- { BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) },
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:29 +0200
-Subject: [PATCH] brcmfmac: process interrupt regardless sdiod state
-
-When the sdio bus state is not ready to process we abort the
-interrupt service routine. This is not wanted as it keeps the
-interrupt source active. Better clear the interrupt source.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -3555,10 +3555,6 @@ void brcmf_sdio_isr(struct brcmf_sdio *b
- return;
- }
-
-- if (bus->sdiodev->state != BRCMF_SDIOD_DATA) {
-- brcmf_err("bus is down. we have nothing to do\n");
-- return;
-- }
- /* Count the interrupt call */
- bus->sdcnt.intrcount++;
- if (in_interrupt())
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:30 +0200
-Subject: [PATCH] brcmfmac: fix sdio suspend and resume
-
-commit 330b4e4be937 ("brcmfmac: Add wowl support for SDIO devices.")
-changed the behaviour by removing the MMC_PM_KEEP_POWER flag for
-non-wowl scenario, which needs to be restored. Another necessary
-change is to mark the card as being non-removable. With this in place
-the suspend resume test passes successfully doing:
-
- # echo devices > /sys/power/pm_test
- # echo mem > /sys/power/state
-
-Note that power may still be switched off when system is going
-in S3 state.
-
-Reported-by: Fu, Zhonghui <<zhonghui.fu@linux.intel.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1011,6 +1011,14 @@ static int brcmf_sdiod_remove(struct brc
- return 0;
- }
-
-+static void brcmf_sdiod_host_fixup(struct mmc_host *host)
-+{
-+ /* runtime-pm powers off the device */
-+ pm_runtime_forbid(host->parent);
-+ /* avoid removal detection upon resume */
-+ host->caps |= MMC_CAP_NONREMOVABLE;
-+}
-+
- static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
- {
- struct sdio_func *func;
-@@ -1076,7 +1084,7 @@ static int brcmf_sdiod_probe(struct brcm
- ret = -ENODEV;
- goto out;
- }
-- pm_runtime_forbid(host->parent);
-+ brcmf_sdiod_host_fixup(host);
- out:
- if (ret)
- brcmf_sdiod_remove(sdiodev);
-@@ -1246,15 +1254,15 @@ static int brcmf_ops_sdio_suspend(struct
- brcmf_sdiod_freezer_on(sdiodev);
- brcmf_sdio_wd_timer(sdiodev->bus, 0);
-
-+ sdio_flags = MMC_PM_KEEP_POWER;
- if (sdiodev->wowl_enabled) {
-- sdio_flags = MMC_PM_KEEP_POWER;
- if (sdiodev->pdata->oob_irq_supported)
- enable_irq_wake(sdiodev->pdata->oob_irq_nr);
- else
-- sdio_flags = MMC_PM_WAKE_SDIO_IRQ;
-- if (sdio_set_host_pm_flags(sdiodev->func[1], sdio_flags))
-- brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
-+ sdio_flags |= MMC_PM_WAKE_SDIO_IRQ;
- }
-+ if (sdio_set_host_pm_flags(sdiodev->func[1], sdio_flags))
-+ brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
- return 0;
- }
-
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:31 +0200
-Subject: [PATCH] brcmfmac: add support for BCM4358 PCIe device
-
-This patch adds support for the BCM4358 2x2 11ac device.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
-@@ -649,6 +649,7 @@ static u32 brcmf_chip_tcm_rambase(struct
- case BRCM_CC_43567_CHIP_ID:
- case BRCM_CC_43569_CHIP_ID:
- case BRCM_CC_43570_CHIP_ID:
-+ case BRCM_CC_4358_CHIP_ID:
- case BRCM_CC_43602_CHIP_ID:
- return 0x180000;
- default:
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -51,6 +51,8 @@ enum brcmf_pcie_state {
- #define BRCMF_PCIE_4356_NVRAM_NAME "brcm/brcmfmac4356-pcie.txt"
- #define BRCMF_PCIE_43570_FW_NAME "brcm/brcmfmac43570-pcie.bin"
- #define BRCMF_PCIE_43570_NVRAM_NAME "brcm/brcmfmac43570-pcie.txt"
-+#define BRCMF_PCIE_4358_FW_NAME "brcm/brcmfmac4358-pcie.bin"
-+#define BRCMF_PCIE_4358_NVRAM_NAME "brcm/brcmfmac4358-pcie.txt"
-
- #define BRCMF_PCIE_FW_UP_TIMEOUT 2000 /* msec */
-
-@@ -189,6 +191,8 @@ MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME)
- MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME);
- MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4358_FW_NAME);
-+MODULE_FIRMWARE(BRCMF_PCIE_4358_NVRAM_NAME);
-
-
- struct brcmf_pcie_console {
-@@ -1333,6 +1337,10 @@ static int brcmf_pcie_get_fwnames(struct
- fw_name = BRCMF_PCIE_43570_FW_NAME;
- nvram_name = BRCMF_PCIE_43570_NVRAM_NAME;
- break;
-+ case BRCM_CC_4358_CHIP_ID:
-+ fw_name = BRCMF_PCIE_4358_FW_NAME;
-+ nvram_name = BRCMF_PCIE_4358_NVRAM_NAME;
-+ break;
- default:
- brcmf_err("Unsupported chip 0x%04x\n", devinfo->ci->chip);
- return -ENODEV;
-@@ -1850,6 +1858,7 @@ static struct pci_device_id brcmf_pcie_d
- BRCMF_PCIE_DEVICE(BRCM_PCIE_4356_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID),
-+ BRCMF_PCIE_DEVICE(BRCM_PCIE_4358_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_2G_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_5G_DEVICE_ID),
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -45,6 +45,7 @@
- #define BRCM_CC_43567_CHIP_ID 43567
- #define BRCM_CC_43569_CHIP_ID 43569
- #define BRCM_CC_43570_CHIP_ID 43570
-+#define BRCM_CC_4358_CHIP_ID 0x4358
- #define BRCM_CC_43602_CHIP_ID 43602
-
- /* USB Device IDs */
-@@ -59,6 +60,7 @@
- #define BRCM_PCIE_4356_DEVICE_ID 0x43ec
- #define BRCM_PCIE_43567_DEVICE_ID 0x43d3
- #define BRCM_PCIE_43570_DEVICE_ID 0x43d9
-+#define BRCM_PCIE_4358_DEVICE_ID 0x43e9
- #define BRCM_PCIE_43602_DEVICE_ID 0x43ba
- #define BRCM_PCIE_43602_2G_DEVICE_ID 0x43bb
- #define BRCM_PCIE_43602_5G_DEVICE_ID 0x43bc
+++ /dev/null
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:32 +0200
-Subject: [PATCH] brcmfmac: add additional 43602 pcie device id.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -1862,6 +1862,7 @@ static struct pci_device_id brcmf_pcie_d
- BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_2G_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_5G_DEVICE_ID),
-+ BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_RAW_DEVICE_ID),
- { /* end: all zeroes */ }
- };
-
---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
-@@ -64,6 +64,7 @@
- #define BRCM_PCIE_43602_DEVICE_ID 0x43ba
- #define BRCM_PCIE_43602_2G_DEVICE_ID 0x43bb
- #define BRCM_PCIE_43602_5G_DEVICE_ID 0x43bc
-+#define BRCM_PCIE_43602_RAW_DEVICE_ID 43602
-
- /* brcmsmac IDs */
- #define BCM4313_D11N2G_ID 0x4727 /* 4313 802.11n 2.4G device */
+++ /dev/null
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Tue, 14 Apr 2015 20:10:33 +0200
-Subject: [PATCH] brcmfmac: Add support for multiple PCIE devices in
- nvram.
-
-With PCIE it is possible to support multiple devices with the
-same device type. They all load the same nvram file. In order to
-support this the nvram can specify which part of the nvram is
-for which pcie device. This patch adds support for these new
-types of nvram files.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -23,6 +23,10 @@
- #include "debug.h"
- #include "firmware.h"
-
-+#define BRCMF_FW_MAX_NVRAM_SIZE 64000
-+#define BRCMF_FW_NVRAM_DEVPATH_LEN 19 /* devpath0=pcie/1/4/ */
-+#define BRCMF_FW_NVRAM_PCIEDEV_LEN 9 /* pcie/1/4/ */
-+
- char brcmf_firmware_path[BRCMF_FW_PATH_LEN];
- module_param_string(firmware_path, brcmf_firmware_path,
- BRCMF_FW_PATH_LEN, 0440);
-@@ -46,6 +50,8 @@ enum nvram_parser_state {
- * @column: current column in line.
- * @pos: byte offset in input buffer.
- * @entry: start position of key,value entry.
-+ * @multi_dev_v1: detect pcie multi device v1 (compressed).
-+ * @multi_dev_v2: detect pcie multi device v2.
- */
- struct nvram_parser {
- enum nvram_parser_state state;
-@@ -56,6 +62,8 @@ struct nvram_parser {
- u32 column;
- u32 pos;
- u32 entry;
-+ bool multi_dev_v1;
-+ bool multi_dev_v2;
- };
-
- static bool is_nvram_char(char c)
-@@ -108,6 +116,10 @@ static enum nvram_parser_state brcmf_nvr
- st = COMMENT;
- else
- st = VALUE;
-+ if (strncmp(&nvp->fwnv->data[nvp->entry], "devpath", 7) == 0)
-+ nvp->multi_dev_v1 = true;
-+ if (strncmp(&nvp->fwnv->data[nvp->entry], "pcie/", 5) == 0)
-+ nvp->multi_dev_v2 = true;
- } else if (!is_nvram_char(c)) {
- brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n",
- nvp->line, nvp->column);
-@@ -133,6 +145,8 @@ brcmf_nvram_handle_value(struct nvram_pa
- ekv = (u8 *)&nvp->fwnv->data[nvp->pos];
- skv = (u8 *)&nvp->fwnv->data[nvp->entry];
- cplen = ekv - skv;
-+ if (nvp->nvram_len + cplen + 1 >= BRCMF_FW_MAX_NVRAM_SIZE)
-+ return END;
- /* copy to output buffer */
- memcpy(&nvp->nvram[nvp->nvram_len], skv, cplen);
- nvp->nvram_len += cplen;
-@@ -180,10 +194,18 @@ static enum nvram_parser_state
- static int brcmf_init_nvram_parser(struct nvram_parser *nvp,
- const struct firmware *nv)
- {
-+ size_t size;
-+
- memset(nvp, 0, sizeof(*nvp));
- nvp->fwnv = nv;
-+ /* Limit size to MAX_NVRAM_SIZE, some files contain lot of comment */
-+ if (nv->size > BRCMF_FW_MAX_NVRAM_SIZE)
-+ size = BRCMF_FW_MAX_NVRAM_SIZE;
-+ else
-+ size = nv->size;
- /* Alloc for extra 0 byte + roundup by 4 + length field */
-- nvp->nvram = kzalloc(nv->size + 1 + 3 + sizeof(u32), GFP_KERNEL);
-+ size += 1 + 3 + sizeof(u32);
-+ nvp->nvram = kzalloc(size, GFP_KERNEL);
- if (!nvp->nvram)
- return -ENOMEM;
-
-@@ -192,12 +214,136 @@ static int brcmf_init_nvram_parser(struc
- return 0;
- }
-
-+/* brcmf_fw_strip_multi_v1 :Some nvram files contain settings for multiple
-+ * devices. Strip it down for one device, use domain_nr/bus_nr to determine
-+ * which data is to be returned. v1 is the version where nvram is stored
-+ * compressed and "devpath" maps to index for valid entries.
-+ */
-+static void brcmf_fw_strip_multi_v1(struct nvram_parser *nvp, u16 domain_nr,
-+ u16 bus_nr)
-+{
-+ u32 i, j;
-+ bool found;
-+ u8 *nvram;
-+ u8 id;
-+
-+ nvram = kzalloc(nvp->nvram_len + 1 + 3 + sizeof(u32), GFP_KERNEL);
-+ if (!nvram)
-+ goto fail;
-+
-+ /* min length: devpath0=pcie/1/4/ + 0:x=y */
-+ if (nvp->nvram_len < BRCMF_FW_NVRAM_DEVPATH_LEN + 6)
-+ goto fail;
-+
-+ /* First search for the devpathX and see if it is the configuration
-+ * for domain_nr/bus_nr. Search complete nvp
-+ */
-+ found = false;
-+ i = 0;
-+ while (i < nvp->nvram_len - BRCMF_FW_NVRAM_DEVPATH_LEN) {
-+ /* Format: devpathX=pcie/Y/Z/
-+ * Y = domain_nr, Z = bus_nr, X = virtual ID
-+ */
-+ if ((strncmp(&nvp->nvram[i], "devpath", 7) == 0) &&
-+ (strncmp(&nvp->nvram[i + 8], "=pcie/", 6) == 0)) {
-+ if (((nvp->nvram[i + 14] - '0') == domain_nr) &&
-+ ((nvp->nvram[i + 16] - '0') == bus_nr)) {
-+ id = nvp->nvram[i + 7] - '0';
-+ found = true;
-+ break;
-+ }
-+ }
-+ while (nvp->nvram[i] != 0)
-+ i++;
-+ i++;
-+ }
-+ if (!found)
-+ goto fail;
-+
-+ /* Now copy all valid entries, release old nvram and assign new one */
-+ i = 0;
-+ j = 0;
-+ while (i < nvp->nvram_len) {
-+ if ((nvp->nvram[i] - '0' == id) && (nvp->nvram[i + 1] == ':')) {
-+ i += 2;
-+ while (nvp->nvram[i] != 0) {
-+ nvram[j] = nvp->nvram[i];
-+ i++;
-+ j++;
-+ }
-+ nvram[j] = 0;
-+ j++;
-+ }
-+ while (nvp->nvram[i] != 0)
-+ i++;
-+ i++;
-+ }
-+ kfree(nvp->nvram);
-+ nvp->nvram = nvram;
-+ nvp->nvram_len = j;
-+ return;
-+
-+fail:
-+ kfree(nvram);
-+ nvp->nvram_len = 0;
-+}
-+
-+/* brcmf_fw_strip_multi_v2 :Some nvram files contain settings for multiple
-+ * devices. Strip it down for one device, use domain_nr/bus_nr to determine
-+ * which data is to be returned. v2 is the version where nvram is stored
-+ * uncompressed, all relevant valid entries are identified by
-+ * pcie/domain_nr/bus_nr:
-+ */
-+static void brcmf_fw_strip_multi_v2(struct nvram_parser *nvp, u16 domain_nr,
-+ u16 bus_nr)
-+{
-+ u32 i, j;
-+ u8 *nvram;
-+
-+ nvram = kzalloc(nvp->nvram_len + 1 + 3 + sizeof(u32), GFP_KERNEL);
-+ if (!nvram)
-+ goto fail;
-+
-+ /* Copy all valid entries, release old nvram and assign new one.
-+ * Valid entries are of type pcie/X/Y/ where X = domain_nr and
-+ * Y = bus_nr.
-+ */
-+ i = 0;
-+ j = 0;
-+ while (i < nvp->nvram_len - BRCMF_FW_NVRAM_PCIEDEV_LEN) {
-+ if ((strncmp(&nvp->nvram[i], "pcie/", 5) == 0) &&
-+ (nvp->nvram[i + 6] == '/') && (nvp->nvram[i + 8] == '/') &&
-+ ((nvp->nvram[i + 5] - '0') == domain_nr) &&
-+ ((nvp->nvram[i + 7] - '0') == bus_nr)) {
-+ i += BRCMF_FW_NVRAM_PCIEDEV_LEN;
-+ while (nvp->nvram[i] != 0) {
-+ nvram[j] = nvp->nvram[i];
-+ i++;
-+ j++;
-+ }
-+ nvram[j] = 0;
-+ j++;
-+ }
-+ while (nvp->nvram[i] != 0)
-+ i++;
-+ i++;
-+ }
-+ kfree(nvp->nvram);
-+ nvp->nvram = nvram;
-+ nvp->nvram_len = j;
-+ return;
-+fail:
-+ kfree(nvram);
-+ nvp->nvram_len = 0;
-+}
-+
- /* brcmf_nvram_strip :Takes a buffer of "<var>=<value>\n" lines read from a fil
- * and ending in a NUL. Removes carriage returns, empty lines, comment lines,
- * and converts newlines to NULs. Shortens buffer as needed and pads with NULs.
- * End of buffer is completed with token identifying length of buffer.
- */
--static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length)
-+static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length,
-+ u16 domain_nr, u16 bus_nr)
- {
- struct nvram_parser nvp;
- u32 pad;
-@@ -212,6 +358,16 @@ static void *brcmf_fw_nvram_strip(const
- if (nvp.state == END)
- break;
- }
-+ if (nvp.multi_dev_v1)
-+ brcmf_fw_strip_multi_v1(&nvp, domain_nr, bus_nr);
-+ else if (nvp.multi_dev_v2)
-+ brcmf_fw_strip_multi_v2(&nvp, domain_nr, bus_nr);
-+
-+ if (nvp.nvram_len == 0) {
-+ kfree(nvp.nvram);
-+ return NULL;
-+ }
-+
- pad = nvp.nvram_len;
- *new_length = roundup(nvp.nvram_len + 1, 4);
- while (pad != *new_length) {
-@@ -239,6 +395,8 @@ struct brcmf_fw {
- u16 flags;
- const struct firmware *code;
- const char *nvram_name;
-+ u16 domain_nr;
-+ u16 bus_nr;
- void (*done)(struct device *dev, const struct firmware *fw,
- void *nvram_image, u32 nvram_len);
- };
-@@ -254,7 +412,8 @@ static void brcmf_fw_request_nvram_done(
- goto fail;
-
- if (fw) {
-- nvram = brcmf_fw_nvram_strip(fw, &nvram_length);
-+ nvram = brcmf_fw_nvram_strip(fw, &nvram_length,
-+ fwctx->domain_nr, fwctx->bus_nr);
- release_firmware(fw);
- if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
- goto fail;
-@@ -309,11 +468,12 @@ fail:
- kfree(fwctx);
- }
-
--int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
-- const char *code, const char *nvram,
-- void (*fw_cb)(struct device *dev,
-- const struct firmware *fw,
-- void *nvram_image, u32 nvram_len))
-+int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags,
-+ const char *code, const char *nvram,
-+ void (*fw_cb)(struct device *dev,
-+ const struct firmware *fw,
-+ void *nvram_image, u32 nvram_len),
-+ u16 domain_nr, u16 bus_nr)
- {
- struct brcmf_fw *fwctx;
-
-@@ -333,8 +493,21 @@ int brcmf_fw_get_firmwares(struct device
- fwctx->done = fw_cb;
- if (flags & BRCMF_FW_REQUEST_NVRAM)
- fwctx->nvram_name = nvram;
-+ fwctx->domain_nr = domain_nr;
-+ fwctx->bus_nr = bus_nr;
-
- return request_firmware_nowait(THIS_MODULE, true, code, dev,
- GFP_KERNEL, fwctx,
- brcmf_fw_request_code_done);
- }
-+
-+int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
-+ const char *code, const char *nvram,
-+ void (*fw_cb)(struct device *dev,
-+ const struct firmware *fw,
-+ void *nvram_image, u32 nvram_len))
-+{
-+ return brcmf_fw_get_firmwares_pcie(dev, flags, code, nvram, fw_cb, 0,
-+ 0);
-+}
-+
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.h
-@@ -32,6 +32,12 @@ void brcmf_fw_nvram_free(void *nvram);
- * fails it will not use the callback, but call device_release_driver()
- * instead which will call the driver .remove() callback.
- */
-+int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags,
-+ const char *code, const char *nvram,
-+ void (*fw_cb)(struct device *dev,
-+ const struct firmware *fw,
-+ void *nvram_image, u32 nvram_len),
-+ u16 domain_nr, u16 bus_nr);
- int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
- const char *code, const char *nvram,
- void (*fw_cb)(struct device *dev,
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -1649,8 +1649,13 @@ brcmf_pcie_probe(struct pci_dev *pdev, c
- struct brcmf_pciedev_info *devinfo;
- struct brcmf_pciedev *pcie_bus_dev;
- struct brcmf_bus *bus;
-+ u16 domain_nr;
-+ u16 bus_nr;
-
-- brcmf_dbg(PCIE, "Enter %x:%x\n", pdev->vendor, pdev->device);
-+ domain_nr = pci_domain_nr(pdev->bus) + 1;
-+ bus_nr = pdev->bus->number;
-+ brcmf_dbg(PCIE, "Enter %x:%x (%d/%d)\n", pdev->vendor, pdev->device,
-+ domain_nr, bus_nr);
-
- ret = -ENOMEM;
- devinfo = kzalloc(sizeof(*devinfo), GFP_KERNEL);
-@@ -1699,10 +1704,10 @@ brcmf_pcie_probe(struct pci_dev *pdev, c
- if (ret)
- goto fail_bus;
-
-- ret = brcmf_fw_get_firmwares(bus->dev, BRCMF_FW_REQUEST_NVRAM |
-- BRCMF_FW_REQ_NV_OPTIONAL,
-- devinfo->fw_name, devinfo->nvram_name,
-- brcmf_pcie_setup);
-+ ret = brcmf_fw_get_firmwares_pcie(bus->dev, BRCMF_FW_REQUEST_NVRAM |
-+ BRCMF_FW_REQ_NV_OPTIONAL,
-+ devinfo->fw_name, devinfo->nvram_name,
-+ brcmf_pcie_setup, domain_nr, bus_nr);
- if (ret == 0)
- return 0;
- fail_bus:
+++ /dev/null
-From: Dan Carpenter <dan.carpenter@oracle.com>
-Date: Thu, 7 May 2015 12:59:19 +0300
-Subject: [PATCH] brcmfmac: cleanup a sizeof()
-
-"flowrings" and "*flowrings" are both pointers so this always returns
-sizeof(void *) and the current code works fine. But "*flowrings" is
-intended here and static checkers complain, so lets change it.
-
-Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -1617,7 +1617,7 @@ static void brcmf_pcie_setup(struct devi
- bus->msgbuf->commonrings[i] =
- &devinfo->shared.commonrings[i]->commonring;
-
-- flowrings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(flowrings),
-+ flowrings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(*flowrings),
- GFP_KERNEL);
- if (!flowrings)
- goto fail;
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 7 May 2015 14:13:03 +0200
-Subject: [PATCH] brcmfmac: check result of USB firmware request
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This prevents silence failures with driver waiting (infinitely) for a
-callback.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
-@@ -1270,8 +1270,13 @@ static int brcmf_usb_probe_cb(struct brc
- bus->chiprev = bus_pub->chiprev;
-
- /* request firmware here */
-- brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL,
-- brcmf_usb_probe_phase2);
-+ ret = brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo),
-+ NULL, brcmf_usb_probe_phase2);
-+ if (ret) {
-+ brcmf_err("firmware request failed: %d\n", ret);
-+ goto fail;
-+ }
-+
- return 0;
-
- fail:
+++ /dev/null
-From: "Fu, Zhonghui" <zhonghui.fu@linux.intel.com>
-Date: Mon, 11 May 2015 10:41:32 +0800
-Subject: [PATCH] brcmfmac: prohibit ACPI power management for brcmfmac driver
-
-ACPI will manage WiFi chip's power state during suspend/resume
-process on some tablet platforms(such as ASUS T100TA). This is
-not supported by brcmfmac driver now, and the context of WiFi
-chip will be damaged after resume. This patch informs ACPI not
-to manage WiFi chip's power state.
-
-Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -33,6 +33,7 @@
- #include <linux/suspend.h>
- #include <linux/errno.h>
- #include <linux/module.h>
-+#include <linux/acpi.h>
- #include <net/cfg80211.h>
-
- #include <defs.h>
-@@ -1122,6 +1123,8 @@ static int brcmf_ops_sdio_probe(struct s
- int err;
- struct brcmf_sdio_dev *sdiodev;
- struct brcmf_bus *bus_if;
-+ struct device *dev;
-+ struct acpi_device *adev;
-
- brcmf_dbg(SDIO, "Enter\n");
- brcmf_dbg(SDIO, "Class=%x\n", func->class);
-@@ -1129,6 +1132,12 @@ static int brcmf_ops_sdio_probe(struct s
- brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
- brcmf_dbg(SDIO, "Function#: %d\n", func->num);
-
-+ /* prohibit ACPI power management for this device */
-+ dev = &func->dev;
-+ adev = ACPI_COMPANION(dev);
-+ if (adev)
-+ adev->flags.power_manageable = 0;
-+
- /* Consume func num 1 but dont do anything with it. */
- if (func->num == 1)
- return 0;
+++ /dev/null
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Tue, 12 May 2015 23:54:25 +0200
-Subject: [PATCH] brcmfmac: avoid gcc-5.1 warning
-
-gcc-5.0 gained a new warning in the fwsignal portion of the brcmfmac
-driver:
-
-drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c: In function 'brcmf_fws_txs_process':
-drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized]
-
-This is a false positive, and marking the brcmf_fws_hanger_poppkt function
-as 'static inline' makes the warning go away. I have checked the object
-file output and while a little code gets moved around, the size of
-the binary remains identical.
-
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
-@@ -635,7 +635,7 @@ static int brcmf_fws_hanger_pushpkt(stru
- return 0;
- }
-
--static int brcmf_fws_hanger_poppkt(struct brcmf_fws_hanger *h,
-+static inline int brcmf_fws_hanger_poppkt(struct brcmf_fws_hanger *h,
- u32 slot_id, struct sk_buff **pktout,
- bool remove_item)
- {
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 20 May 2015 14:09:47 +0200
-Subject: [PATCH] brcmfmac: allow device tree node without 'interrupts'
- property
-
-As described in the device tree bindings for 'brcm,bcm4329-fmac'
-nodes, the interrupts property is optional. So adding a check
-for the presence of this property before attempting to parse
-and map the interrupt. If not present or parsing fails return
-and fallback to in-band sdio interrupt.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/of.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/of.c
-@@ -39,10 +39,16 @@ void brcmf_of_probe(struct brcmf_sdio_de
- if (!sdiodev->pdata)
- return;
-
-+ if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
-+ sdiodev->pdata->drive_strength = val;
-+
-+ /* make sure there are interrupts defined in the node */
-+ if (!of_find_property(np, "interrupts", NULL))
-+ return;
-+
- irq = irq_of_parse_and_map(np, 0);
- if (!irq) {
- brcmf_err("interrupt could not be mapped\n");
-- devm_kfree(dev, sdiodev->pdata);
- return;
- }
- irqf = irqd_get_trigger_type(irq_get_irq_data(irq));
-@@ -50,7 +56,4 @@ void brcmf_of_probe(struct brcmf_sdio_de
- sdiodev->pdata->oob_irq_supported = true;
- sdiodev->pdata->oob_irq_nr = irq;
- sdiodev->pdata->oob_irq_flags = irqf;
--
-- if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
-- sdiodev->pdata->drive_strength = val;
- }
+++ /dev/null
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 20 May 2015 14:09:48 +0200
-Subject: [PATCH] brcmfmac: Improve throughput by scheduling msbug flow worker.
-
-The tx flow worker in msgbuf gets scheduled at tx till a certain
-threshold has been reached. Then the tx completes will take over
-the scheduling. When amsdu and ampdu is used the frames are
-transferred wireless in a very bulky fashion, in combination
-with this scheduling algorithm and buffer limiters in the stack
-this can result in limited throughput. This change causes the
-flow worker to be scheduled more frequently from tx.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.c
-@@ -249,8 +249,8 @@ void brcmf_flowring_delete(struct brcmf_
- }
-
-
--void brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
-- struct sk_buff *skb)
-+u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
-+ struct sk_buff *skb)
- {
- struct brcmf_flowring_ring *ring;
-
-@@ -271,6 +271,7 @@ void brcmf_flowring_enqueue(struct brcmf
- if (skb_queue_len(&ring->skblist) < BRCMF_FLOWRING_LOW)
- brcmf_flowring_block(flow, flowid, false);
- }
-+ return skb_queue_len(&ring->skblist);
- }
-
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.h
-@@ -64,8 +64,8 @@ u32 brcmf_flowring_create(struct brcmf_f
- void brcmf_flowring_delete(struct brcmf_flowring *flow, u8 flowid);
- void brcmf_flowring_open(struct brcmf_flowring *flow, u8 flowid);
- u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u8 flowid);
--void brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
-- struct sk_buff *skb);
-+u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
-+ struct sk_buff *skb);
- struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u8 flowid);
- void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u8 flowid,
- struct sk_buff *skb);
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -73,7 +73,7 @@
- #define BRCMF_MSGBUF_TX_FLUSH_CNT1 32
- #define BRCMF_MSGBUF_TX_FLUSH_CNT2 96
-
--#define BRCMF_MSGBUF_DELAY_TXWORKER_THRS 64
-+#define BRCMF_MSGBUF_DELAY_TXWORKER_THRS 96
- #define BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS 32
-
- struct msgbuf_common_hdr {
-@@ -797,6 +797,8 @@ static int brcmf_msgbuf_txdata(struct br
- struct brcmf_flowring *flow = msgbuf->flow;
- struct ethhdr *eh = (struct ethhdr *)(skb->data);
- u32 flowid;
-+ u32 queue_count;
-+ bool force;
-
- flowid = brcmf_flowring_lookup(flow, eh->h_dest, skb->priority, ifidx);
- if (flowid == BRCMF_FLOWRING_INVALID_ID) {
-@@ -804,8 +806,9 @@ static int brcmf_msgbuf_txdata(struct br
- if (flowid == BRCMF_FLOWRING_INVALID_ID)
- return -ENOMEM;
- }
-- brcmf_flowring_enqueue(flow, flowid, skb);
-- brcmf_msgbuf_schedule_txdata(msgbuf, flowid, false);
-+ queue_count = brcmf_flowring_enqueue(flow, flowid, skb);
-+ force = ((queue_count % BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS) == 0);
-+ brcmf_msgbuf_schedule_txdata(msgbuf, flowid, force);
-
- return 0;
- }
+++ /dev/null
-From: Franky Lin <frankyl@broadcom.com>
-Date: Wed, 20 May 2015 14:09:49 +0200
-Subject: [PATCH] brcmfmac: remove pci shared structure rev4 support
-
-All pcie full dongle chips supported by fmac are using rev 5+ shared
-structure. This patch removes the rev4 related code.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -112,10 +112,9 @@ enum brcmf_pcie_state {
- BRCMF_PCIE_MB_INT_D2H3_DB0 | \
- BRCMF_PCIE_MB_INT_D2H3_DB1)
-
--#define BRCMF_PCIE_MIN_SHARED_VERSION 4
-+#define BRCMF_PCIE_MIN_SHARED_VERSION 5
- #define BRCMF_PCIE_MAX_SHARED_VERSION 5
- #define BRCMF_PCIE_SHARED_VERSION_MASK 0x00FF
--#define BRCMF_PCIE_SHARED_TXPUSH_SUPPORT 0x4000
-
- #define BRCMF_PCIE_FLAGS_HTOD_SPLIT 0x4000
- #define BRCMF_PCIE_FLAGS_DTOH_SPLIT 0x8000
-@@ -1280,11 +1279,6 @@ brcmf_pcie_init_share_ram_info(struct br
- brcmf_err("Unsupported PCIE version %d\n", version);
- return -EINVAL;
- }
-- if (shared->flags & BRCMF_PCIE_SHARED_TXPUSH_SUPPORT) {
-- brcmf_err("Unsupported legacy TX mode 0x%x\n",
-- shared->flags & BRCMF_PCIE_SHARED_TXPUSH_SUPPORT);
-- return -EINVAL;
-- }
-
- addr = sharedram_addr + BRCMF_SHARED_MAX_RXBUFPOST_OFFSET;
- shared->max_rxbufpost = brcmf_pcie_read_tcm16(devinfo, addr);
+++ /dev/null
-From: Franky Lin <frankyl@broadcom.com>
-Date: Wed, 20 May 2015 14:09:50 +0200
-Subject: [PATCH] brcmfmac: remove dummy cache flush/invalidate function
-
-brcmf_dma_flush and brcmf_dma_invalidate_cache are not necessary and
-have never been implemented.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/commonring.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/commonring.c
-@@ -22,17 +22,6 @@
- #include "core.h"
- #include "commonring.h"
-
--
--/* dma flushing needs implementation for mips and arm platforms. Should
-- * be put in util. Note, this is not real flushing. It is virtual non
-- * cached memory. Only write buffers should have to be drained. Though
-- * this may be different depending on platform......
-- * SEE ALSO msgbuf.c
-- */
--#define brcmf_dma_flush(addr, len)
--#define brcmf_dma_invalidate_cache(addr, len)
--
--
- void brcmf_commonring_register_cb(struct brcmf_commonring *commonring,
- int (*cr_ring_bell)(void *ctx),
- int (*cr_update_rptr)(void *ctx),
-@@ -206,14 +195,9 @@ int brcmf_commonring_write_complete(stru
- address = commonring->buf_addr;
- address += (commonring->f_ptr * commonring->item_len);
- if (commonring->f_ptr > commonring->w_ptr) {
-- brcmf_dma_flush(address,
-- (commonring->depth - commonring->f_ptr) *
-- commonring->item_len);
- address = commonring->buf_addr;
- commonring->f_ptr = 0;
- }
-- brcmf_dma_flush(address, (commonring->w_ptr - commonring->f_ptr) *
-- commonring->item_len);
-
- commonring->f_ptr = commonring->w_ptr;
-
-@@ -258,8 +242,6 @@ void *brcmf_commonring_get_read_ptr(stru
- if (commonring->r_ptr == commonring->depth)
- commonring->r_ptr = 0;
-
-- brcmf_dma_invalidate_cache(ret_addr, *n_ items * commonring->item_len);
--
- return ret_addr;
- }
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -278,16 +278,6 @@ struct brcmf_msgbuf_pktids {
- struct brcmf_msgbuf_pktid *array;
- };
-
--
--/* dma flushing needs implementation for mips and arm platforms. Should
-- * be put in util. Note, this is not real flushing. It is virtual non
-- * cached memory. Only write buffers should have to be drained. Though
-- * this may be different depending on platform......
-- */
--#define brcmf_dma_flush(addr, len)
--#define brcmf_dma_invalidate_cache(addr, len)
--
--
- static void brcmf_msgbuf_rxbuf_ioctlresp_post(struct brcmf_msgbuf *msgbuf);
-
-
-@@ -462,7 +452,6 @@ static int brcmf_msgbuf_tx_ioctl(struct
- memcpy(msgbuf->ioctbuf, buf, buf_len);
- else
- memset(msgbuf->ioctbuf, 0, buf_len);
-- brcmf_dma_flush(ioctl_buf, buf_len);
-
- err = brcmf_commonring_write_complete(commonring);
- brcmf_commonring_unlock(commonring);
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -276,15 +276,6 @@ static const u32 brcmf_ring_itemsize[BRC
- };
-
-
--/* dma flushing needs implementation for mips and arm platforms. Should
-- * be put in util. Note, this is not real flushing. It is virtual non
-- * cached memory. Only write buffers should have to be drained. Though
-- * this may be different depending on platform......
-- */
--#define brcmf_dma_flush(addr, len)
--#define brcmf_dma_invalidate_cache(addr, len)
--
--
- static u32
- brcmf_pcie_read_reg32(struct brcmf_pciedev_info *devinfo, u32 reg_offset)
- {
-@@ -1174,7 +1165,6 @@ static int brcmf_pcie_init_scratchbuffer
- goto fail;
-
- memset(devinfo->shared.scratch, 0, BRCMF_DMA_D2H_SCRATCH_BUF_LEN);
-- brcmf_dma_flush(devinfo->shared.scratch, BRCMF_DMA_D2H_SCRATCH_BUF_LEN);
-
- addr = devinfo->shared.tcm_base_address +
- BRCMF_SHARED_DMA_SCRATCH_ADDR_OFFSET;
-@@ -1192,7 +1182,6 @@ static int brcmf_pcie_init_scratchbuffer
- goto fail;
-
- memset(devinfo->shared.ringupd, 0, BRCMF_DMA_D2H_RINGUPD_BUF_LEN);
-- brcmf_dma_flush(devinfo->shared.ringupd, BRCMF_DMA_D2H_RINGUPD_BUF_LEN);
-
- addr = devinfo->shared.tcm_base_address +
- BRCMF_SHARED_DMA_RINGUPD_ADDR_OFFSET;
+++ /dev/null
-From: Franky Lin <frankyl@broadcom.com>
-Date: Wed, 20 May 2015 14:09:51 +0200
-Subject: [PATCH] brcmfmac: add support for dma indices feature
-
-PCIe full dongle firmware can support a dma indices feature with which
-firmware can update/fetch the read/write indices of message buffer
-rings on both host to dongle and dongle to host directions. The support is
-announced by firmware through shared flags.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Franky Lin <frankyl@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -115,6 +115,8 @@ enum brcmf_pcie_state {
- #define BRCMF_PCIE_MIN_SHARED_VERSION 5
- #define BRCMF_PCIE_MAX_SHARED_VERSION 5
- #define BRCMF_PCIE_SHARED_VERSION_MASK 0x00FF
-+#define BRCMF_PCIE_SHARED_DMA_INDEX 0x10000
-+#define BRCMF_PCIE_SHARED_DMA_2B_IDX 0x100000
-
- #define BRCMF_PCIE_FLAGS_HTOD_SPLIT 0x4000
- #define BRCMF_PCIE_FLAGS_DTOH_SPLIT 0x8000
-@@ -146,6 +148,10 @@ enum brcmf_pcie_state {
- #define BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET 8
- #define BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET 12
- #define BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET 16
-+#define BRCMF_SHARED_RING_H2D_WP_HADDR_OFFSET 20
-+#define BRCMF_SHARED_RING_H2D_RP_HADDR_OFFSET 28
-+#define BRCMF_SHARED_RING_D2H_WP_HADDR_OFFSET 36
-+#define BRCMF_SHARED_RING_D2H_RP_HADDR_OFFSET 44
- #define BRCMF_SHARED_RING_TCM_MEMLOC_OFFSET 0
- #define BRCMF_SHARED_RING_MAX_SUB_QUEUES 52
-
-@@ -247,6 +253,13 @@ struct brcmf_pciedev_info {
- bool mbdata_completed;
- bool irq_allocated;
- bool wowl_enabled;
-+ u8 dma_idx_sz;
-+ void *idxbuf;
-+ u32 idxbuf_sz;
-+ dma_addr_t idxbuf_dmahandle;
-+ u16 (*read_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset);
-+ void (*write_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset,
-+ u16 value);
- };
-
- struct brcmf_pcie_ringbuf {
-@@ -323,6 +336,25 @@ brcmf_pcie_write_tcm16(struct brcmf_pcie
- }
-
-
-+static u16
-+brcmf_pcie_read_idx(struct brcmf_pciedev_info *devinfo, u32 mem_offset)
-+{
-+ u16 *address = devinfo->idxbuf + mem_offset;
-+
-+ return (*(address));
-+}
-+
-+
-+static void
-+brcmf_pcie_write_idx(struct brcmf_pciedev_info *devinfo, u32 mem_offset,
-+ u16 value)
-+{
-+ u16 *address = devinfo->idxbuf + mem_offset;
-+
-+ *(address) = value;
-+}
-+
-+
- static u32
- brcmf_pcie_read_tcm32(struct brcmf_pciedev_info *devinfo, u32 mem_offset)
- {
-@@ -868,7 +900,7 @@ static int brcmf_pcie_ring_mb_write_rptr
- brcmf_dbg(PCIE, "W r_ptr %d (%d), ring %d\n", commonring->r_ptr,
- commonring->w_ptr, ring->id);
-
-- brcmf_pcie_write_tcm16(devinfo, ring->r_idx_addr, commonring->r_ptr);
-+ devinfo->write_ptr(devinfo, ring->r_idx_addr, commonring->r_ptr);
-
- return 0;
- }
-@@ -886,7 +918,7 @@ static int brcmf_pcie_ring_mb_write_wptr
- brcmf_dbg(PCIE, "W w_ptr %d (%d), ring %d\n", commonring->w_ptr,
- commonring->r_ptr, ring->id);
-
-- brcmf_pcie_write_tcm16(devinfo, ring->w_idx_addr, commonring->w_ptr);
-+ devinfo->write_ptr(devinfo, ring->w_idx_addr, commonring->w_ptr);
-
- return 0;
- }
-@@ -915,7 +947,7 @@ static int brcmf_pcie_ring_mb_update_rpt
- if (devinfo->state != BRCMFMAC_PCIE_STATE_UP)
- return -EIO;
-
-- commonring->r_ptr = brcmf_pcie_read_tcm16(devinfo, ring->r_idx_addr);
-+ commonring->r_ptr = devinfo->read_ptr(devinfo, ring->r_idx_addr);
-
- brcmf_dbg(PCIE, "R r_ptr %d (%d), ring %d\n", commonring->r_ptr,
- commonring->w_ptr, ring->id);
-@@ -933,7 +965,7 @@ static int brcmf_pcie_ring_mb_update_wpt
- if (devinfo->state != BRCMFMAC_PCIE_STATE_UP)
- return -EIO;
-
-- commonring->w_ptr = brcmf_pcie_read_tcm16(devinfo, ring->w_idx_addr);
-+ commonring->w_ptr = devinfo->read_ptr(devinfo, ring->w_idx_addr);
-
- brcmf_dbg(PCIE, "R w_ptr %d (%d), ring %d\n", commonring->w_ptr,
- commonring->r_ptr, ring->id);
-@@ -1038,6 +1070,13 @@ static void brcmf_pcie_release_ringbuffe
- }
- kfree(devinfo->shared.flowrings);
- devinfo->shared.flowrings = NULL;
-+ if (devinfo->idxbuf) {
-+ dma_free_coherent(&devinfo->pdev->dev,
-+ devinfo->idxbuf_sz,
-+ devinfo->idxbuf,
-+ devinfo->idxbuf_dmahandle);
-+ devinfo->idxbuf = NULL;
-+ }
- }
-
-
-@@ -1053,19 +1092,72 @@ static int brcmf_pcie_init_ringbuffers(s
- u32 addr;
- u32 ring_mem_ptr;
- u32 i;
-+ u64 address;
-+ u32 bufsz;
- u16 max_sub_queues;
-+ u8 idx_offset;
-
- ring_addr = devinfo->shared.ring_info_addr;
- brcmf_dbg(PCIE, "Base ring addr = 0x%08x\n", ring_addr);
-+ addr = ring_addr + BRCMF_SHARED_RING_MAX_SUB_QUEUES;
-+ max_sub_queues = brcmf_pcie_read_tcm16(devinfo, addr);
-
-- addr = ring_addr + BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET;
-- d2h_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-- addr = ring_addr + BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET;
-- d2h_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-- addr = ring_addr + BRCMF_SHARED_RING_H2D_W_IDX_PTR_OFFSET;
-- h2d_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-- addr = ring_addr + BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET;
-- h2d_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+ if (devinfo->dma_idx_sz != 0) {
-+ bufsz = (BRCMF_NROF_D2H_COMMON_MSGRINGS + max_sub_queues) *
-+ devinfo->dma_idx_sz * 2;
-+ devinfo->idxbuf = dma_alloc_coherent(&devinfo->pdev->dev, bufsz,
-+ &devinfo->idxbuf_dmahandle,
-+ GFP_KERNEL);
-+ if (!devinfo->idxbuf)
-+ devinfo->dma_idx_sz = 0;
-+ }
-+
-+ if (devinfo->dma_idx_sz == 0) {
-+ addr = ring_addr + BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET;
-+ d2h_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+ addr = ring_addr + BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET;
-+ d2h_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+ addr = ring_addr + BRCMF_SHARED_RING_H2D_W_IDX_PTR_OFFSET;
-+ h2d_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+ addr = ring_addr + BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET;
-+ h2d_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-+ idx_offset = sizeof(u32);
-+ devinfo->write_ptr = brcmf_pcie_write_tcm16;
-+ devinfo->read_ptr = brcmf_pcie_read_tcm16;
-+ brcmf_dbg(PCIE, "Using TCM indices\n");
-+ } else {
-+ memset(devinfo->idxbuf, 0, bufsz);
-+ devinfo->idxbuf_sz = bufsz;
-+ idx_offset = devinfo->dma_idx_sz;
-+ devinfo->write_ptr = brcmf_pcie_write_idx;
-+ devinfo->read_ptr = brcmf_pcie_read_idx;
-+
-+ h2d_w_idx_ptr = 0;
-+ addr = ring_addr + BRCMF_SHARED_RING_H2D_WP_HADDR_OFFSET;
-+ address = (u64)devinfo->idxbuf_dmahandle;
-+ brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
-+ brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
-+
-+ h2d_r_idx_ptr = h2d_w_idx_ptr + max_sub_queues * idx_offset;
-+ addr = ring_addr + BRCMF_SHARED_RING_H2D_RP_HADDR_OFFSET;
-+ address += max_sub_queues * idx_offset;
-+ brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
-+ brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
-+
-+ d2h_w_idx_ptr = h2d_r_idx_ptr + max_sub_queues * idx_offset;
-+ addr = ring_addr + BRCMF_SHARED_RING_D2H_WP_HADDR_OFFSET;
-+ address += max_sub_queues * idx_offset;
-+ brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
-+ brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
-+
-+ d2h_r_idx_ptr = d2h_w_idx_ptr +
-+ BRCMF_NROF_D2H_COMMON_MSGRINGS * idx_offset;
-+ addr = ring_addr + BRCMF_SHARED_RING_D2H_RP_HADDR_OFFSET;
-+ address += BRCMF_NROF_D2H_COMMON_MSGRINGS * idx_offset;
-+ brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
-+ brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
-+ brcmf_dbg(PCIE, "Using host memory indices\n");
-+ }
-
- addr = ring_addr + BRCMF_SHARED_RING_TCM_MEMLOC_OFFSET;
- ring_mem_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
-@@ -1079,8 +1171,8 @@ static int brcmf_pcie_init_ringbuffers(s
- ring->id = i;
- devinfo->shared.commonrings[i] = ring;
-
-- h2d_w_idx_ptr += sizeof(u32);
-- h2d_r_idx_ptr += sizeof(u32);
-+ h2d_w_idx_ptr += idx_offset;
-+ h2d_r_idx_ptr += idx_offset;
- ring_mem_ptr += BRCMF_RING_MEM_SZ;
- }
-
-@@ -1094,13 +1186,11 @@ static int brcmf_pcie_init_ringbuffers(s
- ring->id = i;
- devinfo->shared.commonrings[i] = ring;
-
-- d2h_w_idx_ptr += sizeof(u32);
-- d2h_r_idx_ptr += sizeof(u32);
-+ d2h_w_idx_ptr += idx_offset;
-+ d2h_r_idx_ptr += idx_offset;
- ring_mem_ptr += BRCMF_RING_MEM_SZ;
- }
-
-- addr = ring_addr + BRCMF_SHARED_RING_MAX_SUB_QUEUES;
-- max_sub_queues = brcmf_pcie_read_tcm16(devinfo, addr);
- devinfo->shared.nrof_flowrings =
- max_sub_queues - BRCMF_NROF_H2D_COMMON_MSGRINGS;
- rings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(*ring),
-@@ -1124,15 +1214,15 @@ static int brcmf_pcie_init_ringbuffers(s
- ring);
- ring->w_idx_addr = h2d_w_idx_ptr;
- ring->r_idx_addr = h2d_r_idx_ptr;
-- h2d_w_idx_ptr += sizeof(u32);
-- h2d_r_idx_ptr += sizeof(u32);
-+ h2d_w_idx_ptr += idx_offset;
-+ h2d_r_idx_ptr += idx_offset;
- }
- devinfo->shared.flowrings = rings;
-
- return 0;
-
- fail:
-- brcmf_err("Allocating commonring buffers failed\n");
-+ brcmf_err("Allocating ring buffers failed\n");
- brcmf_pcie_release_ringbuffers(devinfo);
- return -ENOMEM;
- }
-@@ -1269,6 +1359,14 @@ brcmf_pcie_init_share_ram_info(struct br
- return -EINVAL;
- }
-
-+ /* check firmware support dma indicies */
-+ if (shared->flags & BRCMF_PCIE_SHARED_DMA_INDEX) {
-+ if (shared->flags & BRCMF_PCIE_SHARED_DMA_2B_IDX)
-+ devinfo->dma_idx_sz = sizeof(u16);
-+ else
-+ devinfo->dma_idx_sz = sizeof(u32);
-+ }
-+
- addr = sharedram_addr + BRCMF_SHARED_MAX_RXBUFPOST_OFFSET;
- shared->max_rxbufpost = brcmf_pcie_read_tcm16(devinfo, addr);
- if (shared->max_rxbufpost == 0)
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 26 May 2015 13:19:46 +0200
-Subject: [PATCH] brcmfmac: avoid null pointer access when
- brcmf_msgbuf_get_pktid() fails
-
-The function brcmf_msgbuf_get_pktid() may return a NULL pointer so
-the callers should check the return pointer before accessing it to
-avoid the crash below (see [1]):
-
-brcmfmac: brcmf_msgbuf_get_pktid: Invalid packet id 273 (not in use)
-BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
-IP: [<ffffffff8145b225>] skb_pull+0x5/0x50
-PGD 0
-Oops: 0000 [#1] PREEMPT SMP
-Modules linked in: pci_stub vboxpci(O) vboxnetflt(O) vboxnetadp(O) vboxdrv(O)
- snd_hda_codec_hdmi bnep mousedev hid_generic ushwmon msr ext4 crc16 mbcache
- jbd2 sd_mod uas usb_storage ahci libahci libata scsi_mod xhci_pci xhci_hcd
- usbcore usb_common
-CPU: 0 PID: 1661 Comm: irq/61-brcmf_pc Tainted: G O 4.0.1-MacbookPro-ARCH #1
-Hardware name: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6,
- BIOS MBP121.88Z.0167.B02.1503241251 03/24/2015
-task: ffff880264203cc0 ti: ffff88025ffe4000 task.ti: ffff88025ffe4000
-RIP: 0010:[<ffffffff8145b225>] [<ffffffff8145b225>] skb_pull+0x5/0x50
-RSP: 0018:ffff88025ffe7d40 EFLAGS: 00010202
-RAX: 0000000000000000 RBX: ffff88008a33c000 RCX: 0000000000000044
-RDX: 0000000000000000 RSI: 000000000000004a RDI: 0000000000000000
-RBP: ffff88025ffe7da8 R08: 0000000000000096 R09: 000000000000004a
-R10: 0000000000000000 R11: 000000000000048e R12: ffff88025ff14f00
-R13: 0000000000000000 R14: ffff880263b48200 R15: ffff88008a33c000
-FS: 0000000000000000(0000) GS:ffff88026ec00000(0000) knlGS:0000000000000000
-CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
-CR2: 0000000000000080 CR3: 000000000180b000 CR4: 00000000003407f0
-Stack:
- ffffffffa06aed74 ffff88025ffe7dc8 ffff880263b48270 ffff880263b48278
- 05ea88020000004a 0002ffff81014635 000000001720b2f6 ffff88026ec116c0
- ffff880263b48200 0000000000010000 ffff880263b4ae00 ffff880264203cc0
-Call Trace:
- [<ffffffffa06aed74>] ? brcmf_msgbuf_process_rx+0x404/0x480 [brcmfmac]
- [<ffffffff810cea60>] ? irq_finalize_oneshot.part.30+0xf0/0xf0
- [<ffffffffa06afb55>] brcmf_proto_msgbuf_rx_trigger+0x35/0xf0 [brcmfmac]
- [<ffffffffa06baf2a>] brcmf_pcie_isr_thread_v2+0x8a/0x130 [brcmfmac]
- [<ffffffff810cea80>] irq_thread_fn+0x20/0x50
- [<ffffffff810ceddf>] irq_thread+0x13f/0x170
- [<ffffffff810cebf0>] ? wake_threads_waitq+0x30/0x30
- [<ffffffff810ceca0>] ? irq_thread_dtor+0xb0/0xb0
- [<ffffffff81092a08>] kthread+0xd8/0xf0
- [<ffffffff81092930>] ? kthread_create_on_node+0x1c0/0x1c0
- [<ffffffff8156d898>] ret_from_fork+0x58/0x90
- [<ffffffff81092930>] ? kthread_create_on_node+0x1c0/0x1c0
-Code: 01 83 e2 f7 88 50 01 48 83 c4 08 5b 5d f3 c3 0f 1f 80 00 00 00 00 83 e2
- f7 88 50 01 c3 66 0f 1f 84 00 00 00 00 00 0f 1f
-RIP [<ffffffff8145b225>] skb_pull+0x5/0x50
- RSP <ffff88025ffe7d40>
-CR2: 0000000000000080
----[ end trace b074c0f90e7c997d ]---
-
-[1] http://mid.gmane.org/20150430193259.GA5630@googlemail.com
-
-Cc: <stable@vger.kernel.org> # v3.18, v3.19, v4.0, v4.1
-Reported-by: Michael Hornung <mhornung.linux@gmail.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -500,11 +500,9 @@ static int brcmf_msgbuf_query_dcmd(struc
- msgbuf->rx_pktids,
- msgbuf->ioctl_resp_pktid);
- if (msgbuf->ioctl_resp_ret_len != 0) {
-- if (!skb) {
-- brcmf_err("Invalid packet id idx recv'd %d\n",
-- msgbuf->ioctl_resp_pktid);
-+ if (!skb)
- return -EBADF;
-- }
-+
- memcpy(buf, skb->data, (len < msgbuf->ioctl_resp_ret_len) ?
- len : msgbuf->ioctl_resp_ret_len);
- }
-@@ -866,10 +864,8 @@ brcmf_msgbuf_process_txstatus(struct brc
- flowid -= BRCMF_NROF_H2D_COMMON_MSGRINGS;
- skb = brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev,
- msgbuf->tx_pktids, idx);
-- if (!skb) {
-- brcmf_err("Invalid packet id idx recv'd %d\n", idx);
-+ if (!skb)
- return;
-- }
-
- set_bit(flowid, msgbuf->txstatus_done_map);
- commonring = msgbuf->flowrings[flowid];
-@@ -1148,6 +1144,8 @@ brcmf_msgbuf_process_rx_complete(struct
-
- skb = brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev,
- msgbuf->rx_pktids, idx);
-+ if (!skb)
-+ return;
-
- if (data_offset)
- skb_pull(skb, data_offset);
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Wed, 27 May 2015 19:31:41 +0200
-Subject: [PATCH] brcmfmac: fix invalid access to struct acpi_device fields
-
-The fields of struct acpi_device are only known when CONFIG_ACPI is
-defined. Fix this by using a helper function. This will resolve the
-issue found in linux-next:
-
- ../brcmfmac/bcmsdh.c: In function 'brcmf_ops_sdio_probe':
- ../brcmfmac/bcmsdh.c:1139:7: error: dereferencing pointer to incomplete type
- adev->flags.power_manageable = 0;
- ^
-
-Fixes: f0992ace680c ("brcmfmac: prohibit ACPI power management ...")
-Cc: Fu, Zhonghui <zhonghui.fu@linux.intel.com>
-Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -1117,6 +1117,18 @@ MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_id
- static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata;
-
-
-+static void brcmf_sdiod_acpi_set_power_manageable(struct device *dev,
-+ int val)
-+{
-+#if IS_ENABLED(CONFIG_ACPI)
-+ struct acpi_device *adev;
-+
-+ adev = ACPI_COMPANION(dev);
-+ if (adev)
-+ adev->flags.power_manageable = 0;
-+#endif
-+}
-+
- static int brcmf_ops_sdio_probe(struct sdio_func *func,
- const struct sdio_device_id *id)
- {
-@@ -1124,7 +1136,6 @@ static int brcmf_ops_sdio_probe(struct s
- struct brcmf_sdio_dev *sdiodev;
- struct brcmf_bus *bus_if;
- struct device *dev;
-- struct acpi_device *adev;
-
- brcmf_dbg(SDIO, "Enter\n");
- brcmf_dbg(SDIO, "Class=%x\n", func->class);
-@@ -1132,11 +1143,9 @@ static int brcmf_ops_sdio_probe(struct s
- brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
- brcmf_dbg(SDIO, "Function#: %d\n", func->num);
-
-- /* prohibit ACPI power management for this device */
- dev = &func->dev;
-- adev = ACPI_COMPANION(dev);
-- if (adev)
-- adev->flags.power_manageable = 0;
-+ /* prohibit ACPI power management for this device */
-+ brcmf_sdiod_acpi_set_power_manageable(dev, 0);
-
- /* Consume func num 1 but dont do anything with it. */
- if (func->num == 1)
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 20 May 2015 09:34:21 +0200
-Subject: [PATCH] brcmfmac: simplify check stripping v2 NVRAM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Comparing NVRAM entry with a full filtering string is simpler than
-comparing it with a short prefix and then checking random chars at magic
-offsets. The cost of snprintf relatively low, we execute it just once.
-Tested on BCM43602 with NVRAM hacked to use V2 format.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -25,7 +25,7 @@
-
- #define BRCMF_FW_MAX_NVRAM_SIZE 64000
- #define BRCMF_FW_NVRAM_DEVPATH_LEN 19 /* devpath0=pcie/1/4/ */
--#define BRCMF_FW_NVRAM_PCIEDEV_LEN 9 /* pcie/1/4/ */
-+#define BRCMF_FW_NVRAM_PCIEDEV_LEN 10 /* pcie/1/4/ + \0 */
-
- char brcmf_firmware_path[BRCMF_FW_PATH_LEN];
- module_param_string(firmware_path, brcmf_firmware_path,
-@@ -297,6 +297,8 @@ fail:
- static void brcmf_fw_strip_multi_v2(struct nvram_parser *nvp, u16 domain_nr,
- u16 bus_nr)
- {
-+ char prefix[BRCMF_FW_NVRAM_PCIEDEV_LEN];
-+ size_t len;
- u32 i, j;
- u8 *nvram;
-
-@@ -308,14 +310,13 @@ static void brcmf_fw_strip_multi_v2(stru
- * Valid entries are of type pcie/X/Y/ where X = domain_nr and
- * Y = bus_nr.
- */
-+ snprintf(prefix, sizeof(prefix), "pcie/%d/%d/", domain_nr, bus_nr);
-+ len = strlen(prefix);
- i = 0;
- j = 0;
-- while (i < nvp->nvram_len - BRCMF_FW_NVRAM_PCIEDEV_LEN) {
-- if ((strncmp(&nvp->nvram[i], "pcie/", 5) == 0) &&
-- (nvp->nvram[i + 6] == '/') && (nvp->nvram[i + 8] == '/') &&
-- ((nvp->nvram[i + 5] - '0') == domain_nr) &&
-- ((nvp->nvram[i + 7] - '0') == bus_nr)) {
-- i += BRCMF_FW_NVRAM_PCIEDEV_LEN;
-+ while (i < nvp->nvram_len - len) {
-+ if (strncmp(&nvp->nvram[i], prefix, len) == 0) {
-+ i += len;
- while (nvp->nvram[i] != 0) {
- nvram[j] = nvp->nvram[i];
- i++;
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 20 May 2015 11:01:08 +0200
-Subject: [PATCH] brcmfmac: simplify check finding NVRAM v1 device path
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-With a simple use of snprintf and small buffer we can compare NVRAM
-entry value with a full string. This way we avoid checking random chars
-at magic offsets.
-Tested on BCM43602 with NVRAM hacked to use v1 format.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -222,6 +222,10 @@ static int brcmf_init_nvram_parser(struc
- static void brcmf_fw_strip_multi_v1(struct nvram_parser *nvp, u16 domain_nr,
- u16 bus_nr)
- {
-+ /* Device path with a leading '=' key-value separator */
-+ char pcie_path[] = "=pcie/?/?";
-+ size_t pcie_len;
-+
- u32 i, j;
- bool found;
- u8 *nvram;
-@@ -238,6 +242,9 @@ static void brcmf_fw_strip_multi_v1(stru
- /* First search for the devpathX and see if it is the configuration
- * for domain_nr/bus_nr. Search complete nvp
- */
-+ snprintf(pcie_path, sizeof(pcie_path), "=pcie/%d/%d", domain_nr,
-+ bus_nr);
-+ pcie_len = strlen(pcie_path);
- found = false;
- i = 0;
- while (i < nvp->nvram_len - BRCMF_FW_NVRAM_DEVPATH_LEN) {
-@@ -245,13 +252,10 @@ static void brcmf_fw_strip_multi_v1(stru
- * Y = domain_nr, Z = bus_nr, X = virtual ID
- */
- if ((strncmp(&nvp->nvram[i], "devpath", 7) == 0) &&
-- (strncmp(&nvp->nvram[i + 8], "=pcie/", 6) == 0)) {
-- if (((nvp->nvram[i + 14] - '0') == domain_nr) &&
-- ((nvp->nvram[i + 16] - '0') == bus_nr)) {
-- id = nvp->nvram[i + 7] - '0';
-- found = true;
-- break;
-- }
-+ (strncmp(&nvp->nvram[i + 8], pcie_path, pcie_len) == 0)) {
-+ id = nvp->nvram[i + 7] - '0';
-+ found = true;
-+ break;
- }
- while (nvp->nvram[i] != 0)
- i++;
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 20 May 2015 13:59:54 +0200
-Subject: [PATCH] brcmfmac: treat \0 as end of comment when parsing NVRAM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes brcmfmac dealing with NVRAM coming from platform e.g. from a
-flash MTD partition. In such cases entries are separated by \0 instead
-of \n which caused ignoring whole content after the first "comment".
-While platform NVRAM doesn't usually contain comments, we switch to
-COMMENT state after e.g. finding an unexpected char in key name.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -162,17 +162,20 @@ brcmf_nvram_handle_value(struct nvram_pa
- static enum nvram_parser_state
- brcmf_nvram_handle_comment(struct nvram_parser *nvp)
- {
-- char *eol, *sol;
-+ char *eoc, *sol;
-
- sol = (char *)&nvp->fwnv->data[nvp->pos];
-- eol = strchr(sol, '\n');
-- if (eol == NULL)
-- return END;
-+ eoc = strchr(sol, '\n');
-+ if (!eoc) {
-+ eoc = strchr(sol, '\0');
-+ if (!eoc)
-+ return END;
-+ }
-
- /* eat all moving to next line */
- nvp->line++;
- nvp->column = 1;
-- nvp->pos += (eol - sol) + 1;
-+ nvp->pos += (eoc - sol) + 1;
- return IDLE;
- }
-
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 23 May 2015 09:15:33 +0200
-Subject: [PATCH] brcmfmac: allow NVRAM values to contain spaces
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Platform NVRAMs often contain values with spaces. Even if right now most
-firmware-supported entries are simple values, we shouldn't reject these
-with spaces. It was semi-confirmed by Broadcom in the early patch adding
-support for platform NVRAMs.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -66,6 +66,12 @@ struct nvram_parser {
- bool multi_dev_v2;
- };
-
-+/**
-+ * is_nvram_char() - check if char is a valid one for NVRAM entry
-+ *
-+ * It accepts all printable ASCII chars except for '#' which opens a comment.
-+ * Please note that ' ' (space) while accepted is not a valid key name char.
-+ */
- static bool is_nvram_char(char c)
- {
- /* comment marker excluded */
-@@ -73,7 +79,7 @@ static bool is_nvram_char(char c)
- return false;
-
- /* key and value may have any other readable character */
-- return (c > 0x20 && c < 0x7f);
-+ return (c >= 0x20 && c < 0x7f);
- }
-
- static bool is_whitespace(char c)
-@@ -120,7 +126,7 @@ static enum nvram_parser_state brcmf_nvr
- nvp->multi_dev_v1 = true;
- if (strncmp(&nvp->fwnv->data[nvp->entry], "pcie/", 5) == 0)
- nvp->multi_dev_v2 = true;
-- } else if (!is_nvram_char(c)) {
-+ } else if (!is_nvram_char(c) || c == ' ') {
- brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n",
- nvp->line, nvp->column);
- return COMMENT;
+++ /dev/null
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Tue, 2 Jun 2015 10:35:46 +0200
-Subject: [PATCH] ath9k: fix DMA stop sequence for AR9003+
-
-AR93xx and newer needs to stop rx before tx to avoid getting the DMA
-engine or MAC into a stuck state.
-This should reduce/fix the occurence of "Failed to stop Tx DMA" logspam.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -216,11 +216,13 @@ static bool ath_prepare_reset(struct ath
- ath_stop_ani(sc);
- ath9k_hw_disable_interrupts(ah);
-
-- if (!ath_drain_all_txq(sc))
-- ret = false;
--
-- if (!ath_stoprecv(sc))
-- ret = false;
-+ if (AR_SREV_9300_20_OR_LATER(ah)) {
-+ ret &= ath_stoprecv(sc);
-+ ret &= ath_drain_all_txq(sc);
-+ } else {
-+ ret &= ath_drain_all_txq(sc);
-+ ret &= ath_stoprecv(sc);
-+ }
-
- return ret;
- }
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 28 May 2015 14:19:21 +0200
-Subject: [PATCH] brcmfmac: support NVRAMs containing pci devpaths (instead of
- pcie)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Recently Broadcom added support for NVRAMs with entries for multiple
-PCIe devices. One of the supported formats is based on prefixes defined
-like: devpath0=pcie/1/4/ and entries like 0:foo=bar 0:baz=qux etc.
-
-Unfortunately there are also a bit older devices using different way of
-defining prefixes, e.g. SmartRG SR400ac (2 x BCM43602) with entries:
-devpath0=pci/1/1/
-devpath1=pci/2/1
-Broadcom stated this old format will never be used/supported by brcmfmac
-but given the simplicity of this patch I'll insist on supporting it.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -232,6 +232,8 @@ static void brcmf_fw_strip_multi_v1(stru
- u16 bus_nr)
- {
- /* Device path with a leading '=' key-value separator */
-+ char pci_path[] = "=pci/?/?";
-+ size_t pci_len;
- char pcie_path[] = "=pcie/?/?";
- size_t pcie_len;
-
-@@ -251,6 +253,9 @@ static void brcmf_fw_strip_multi_v1(stru
- /* First search for the devpathX and see if it is the configuration
- * for domain_nr/bus_nr. Search complete nvp
- */
-+ snprintf(pci_path, sizeof(pci_path), "=pci/%d/%d", domain_nr,
-+ bus_nr);
-+ pci_len = strlen(pci_path);
- snprintf(pcie_path, sizeof(pcie_path), "=pcie/%d/%d", domain_nr,
- bus_nr);
- pcie_len = strlen(pcie_path);
-@@ -260,8 +265,9 @@ static void brcmf_fw_strip_multi_v1(stru
- /* Format: devpathX=pcie/Y/Z/
- * Y = domain_nr, Z = bus_nr, X = virtual ID
- */
-- if ((strncmp(&nvp->nvram[i], "devpath", 7) == 0) &&
-- (strncmp(&nvp->nvram[i + 8], pcie_path, pcie_len) == 0)) {
-+ if (strncmp(&nvp->nvram[i], "devpath", 7) == 0 &&
-+ (!strncmp(&nvp->nvram[i + 8], pci_path, pci_len) ||
-+ !strncmp(&nvp->nvram[i + 8], pcie_path, pcie_len))) {
- id = nvp->nvram[i + 7] - '0';
- found = true;
- break;
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 31 May 2015 02:52:26 +0200
-Subject: [PATCH] brcmfmac: set wiphy perm_addr to hardware MAC address
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows e.g. user space to use /sys/class/ieee80211/*/macaddress
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -6070,6 +6070,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
- brcmf_err("Could not allocate wiphy device\n");
- return NULL;
- }
-+ memcpy(wiphy->perm_addr, drvr->mac, ETH_ALEN);
- set_wiphy_dev(wiphy, busdev);
-
- cfg = wiphy_priv(wiphy);
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 4 Jun 2015 22:11:07 +0200
-Subject: [PATCH] brcmfmac: use direct data pointer in NVRAM parser struct
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-As we plan to add support for platform NVRAM we should store direct
-data pointer without the extra struct firmware layer. This will allow
-us to support other sources with the only requirement being u8 buffer.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Acked-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-@@ -43,7 +43,7 @@ enum nvram_parser_state {
- * struct nvram_parser - internal info for parser.
- *
- * @state: current parser state.
-- * @fwnv: input buffer being parsed.
-+ * @data: input buffer being parsed.
- * @nvram: output buffer with parse result.
- * @nvram_len: lenght of parse result.
- * @line: current line.
-@@ -55,7 +55,7 @@ enum nvram_parser_state {
- */
- struct nvram_parser {
- enum nvram_parser_state state;
-- const struct firmware *fwnv;
-+ const u8 *data;
- u8 *nvram;
- u32 nvram_len;
- u32 line;
-@@ -91,7 +91,7 @@ static enum nvram_parser_state brcmf_nvr
- {
- char c;
-
-- c = nvp->fwnv->data[nvp->pos];
-+ c = nvp->data[nvp->pos];
- if (c == '\n')
- return COMMENT;
- if (is_whitespace(c))
-@@ -115,16 +115,16 @@ static enum nvram_parser_state brcmf_nvr
- enum nvram_parser_state st = nvp->state;
- char c;
-
-- c = nvp->fwnv->data[nvp->pos];
-+ c = nvp->data[nvp->pos];
- if (c == '=') {
- /* ignore RAW1 by treating as comment */
-- if (strncmp(&nvp->fwnv->data[nvp->entry], "RAW1", 4) == 0)
-+ if (strncmp(&nvp->data[nvp->entry], "RAW1", 4) == 0)
- st = COMMENT;
- else
- st = VALUE;
-- if (strncmp(&nvp->fwnv->data[nvp->entry], "devpath", 7) == 0)
-+ if (strncmp(&nvp->data[nvp->entry], "devpath", 7) == 0)
- nvp->multi_dev_v1 = true;
-- if (strncmp(&nvp->fwnv->data[nvp->entry], "pcie/", 5) == 0)
-+ if (strncmp(&nvp->data[nvp->entry], "pcie/", 5) == 0)
- nvp->multi_dev_v2 = true;
- } else if (!is_nvram_char(c) || c == ' ') {
- brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n",
-@@ -145,11 +145,11 @@ brcmf_nvram_handle_value(struct nvram_pa
- char *ekv;
- u32 cplen;
-
-- c = nvp->fwnv->data[nvp->pos];
-+ c = nvp->data[nvp->pos];
- if (!is_nvram_char(c)) {
- /* key,value pair complete */
-- ekv = (u8 *)&nvp->fwnv->data[nvp->pos];
-- skv = (u8 *)&nvp->fwnv->data[nvp->entry];
-+ ekv = (u8 *)&nvp->data[nvp->pos];
-+ skv = (u8 *)&nvp->data[nvp->entry];
- cplen = ekv - skv;
- if (nvp->nvram_len + cplen + 1 >= BRCMF_FW_MAX_NVRAM_SIZE)
- return END;
-@@ -170,7 +170,7 @@ brcmf_nvram_handle_comment(struct nvram_
- {
- char *eoc, *sol;
-
-- sol = (char *)&nvp->fwnv->data[nvp->pos];
-+ sol = (char *)&nvp->data[nvp->pos];
- eoc = strchr(sol, '\n');
- if (!eoc) {
- eoc = strchr(sol, '\0');
-@@ -201,17 +201,17 @@ static enum nvram_parser_state
- };
-
- static int brcmf_init_nvram_parser(struct nvram_parser *nvp,
-- const struct firmware *nv)
-+ const u8 *data, size_t data_len)
- {
- size_t size;
-
- memset(nvp, 0, sizeof(*nvp));
-- nvp->fwnv = nv;
-+ nvp->data = data;
- /* Limit size to MAX_NVRAM_SIZE, some files contain lot of comment */
-- if (nv->size > BRCMF_FW_MAX_NVRAM_SIZE)
-+ if (data_len > BRCMF_FW_MAX_NVRAM_SIZE)
- size = BRCMF_FW_MAX_NVRAM_SIZE;
- else
-- size = nv->size;
-+ size = data_len;
- /* Alloc for extra 0 byte + roundup by 4 + length field */
- size += 1 + 3 + sizeof(u32);
- nvp->nvram = kzalloc(size, GFP_KERNEL);
-@@ -362,18 +362,18 @@ fail:
- * and converts newlines to NULs. Shortens buffer as needed and pads with NULs.
- * End of buffer is completed with token identifying length of buffer.
- */
--static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length,
-- u16 domain_nr, u16 bus_nr)
-+static void *brcmf_fw_nvram_strip(const u8 *data, size_t data_len,
-+ u32 *new_length, u16 domain_nr, u16 bus_nr)
- {
- struct nvram_parser nvp;
- u32 pad;
- u32 token;
- __le32 token_le;
-
-- if (brcmf_init_nvram_parser(&nvp, nv) < 0)
-+ if (brcmf_init_nvram_parser(&nvp, data, data_len) < 0)
- return NULL;
-
-- while (nvp.pos < nv->size) {
-+ while (nvp.pos < data_len) {
- nvp.state = nv_parser_states[nvp.state](&nvp);
- if (nvp.state == END)
- break;
-@@ -432,7 +432,7 @@ static void brcmf_fw_request_nvram_done(
- goto fail;
-
- if (fw) {
-- nvram = brcmf_fw_nvram_strip(fw, &nvram_length,
-+ nvram = brcmf_fw_nvram_strip(fw->data, fw->size, &nvram_length,
- fwctx->domain_nr, fwctx->bus_nr);
- release_firmware(fw);
- if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 6 Jun 2015 22:45:59 +0200
-Subject: [PATCH] b43: fix support for 14e4:4321 PCI dev with BCM4321 chipset
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It seems Broadcom released two devices with conflicting device id. There
-are for sure 14e4:4321 PCI devices with BCM4321 (N-PHY) chipset, they
-can be found in routers, e.g. Netgear WNR834Bv2. However, according to
-Broadcom public sources 0x4321 is also used for 5 GHz BCM4306 (G-PHY).
-It's unsure if they meant PCI device id, or "virtual" id (from SPROM).
-To distinguish these devices lets check PHY type (G vs. N).
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Cc: <stable@vger.kernel.org> # 3.16+
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -5365,6 +5365,10 @@ static void b43_supported_bands(struct b
- *have_5ghz_phy = true;
- return;
- case 0x4321: /* BCM4306 */
-+ /* There are 14e4:4321 PCI devs with 2.4 GHz BCM4321 (N-PHY) */
-+ if (dev->phy.type != B43_PHYTYPE_G)
-+ break;
-+ /* fall through */
- case 0x4313: /* BCM4311 */
- case 0x431a: /* BCM4318 */
- case 0x432a: /* BCM4321 */
+++ /dev/null
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sun, 7 Jun 2015 13:53:35 +0200
-Subject: [PATCH] ath9k: force rx_clear when disabling rx
-
-This makes stopping Rx more reliable and should reduce the frequency of
-Rx related DMA stop warnings
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/mac.c
-+++ b/drivers/net/wireless/ath/ath9k/mac.c
-@@ -677,13 +677,15 @@ void ath9k_hw_startpcureceive(struct ath
-
- ath9k_ani_reset(ah, is_scanning);
-
-- REG_CLR_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
-+ REG_CLR_BIT(ah, AR_DIAG_SW,
-+ AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT | AR_DIAG_FORCE_RX_CLEAR);
- }
- EXPORT_SYMBOL(ath9k_hw_startpcureceive);
-
- void ath9k_hw_abortpcurecv(struct ath_hw *ah)
- {
-- REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_ABORT | AR_DIAG_RX_DIS);
-+ REG_SET_BIT(ah, AR_DIAG_SW,
-+ AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT | AR_DIAG_FORCE_RX_CLEAR);
-
- ath9k_hw_disable_mib_counters(ah);
- }
+++ /dev/null
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sun, 21 Jun 2015 19:45:59 +0200
-Subject: [PATCH] ath9k_hw: fix device ID check for AR956x
-
-Because of the missing return, the macVersion value was being
-overwritten with an invalid register read
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -278,6 +278,7 @@ static void ath9k_hw_read_revisions(stru
- return;
- case AR9300_DEVID_QCA956X:
- ah->hw_version.macVersion = AR_SREV_VERSION_9561;
-+ return;
- }
-
- val = REG_READ(ah, AR_SREV) & AR_SREV_ID;
+++ /dev/null
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Mon, 8 Jun 2015 14:38:32 +0200
-Subject: [PATCH] brcmfmac: Update msgbuf read pointer quicker.
-
-On device to host data using msgbuf the read pointer gets updated
-once all data is processed. Updating this pointer more frequently
-allows the firmware to add more data quicker. This will result in
-slightly higher and more stable throughput on CPU bounded host
-processors.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/commonring.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/commonring.c
-@@ -223,8 +223,6 @@ void brcmf_commonring_write_cancel(struc
- void *brcmf_commonring_get_read_ptr(struct brcmf_commonring *commonring,
- u16 *n_items)
- {
-- void *ret_addr;
--
- if (commonring->cr_update_wptr)
- commonring->cr_update_wptr(commonring->cr_ctx);
-
-@@ -235,19 +233,18 @@ void *brcmf_commonring_get_read_ptr(stru
- if (*n_items == 0)
- return NULL;
-
-- ret_addr = commonring->buf_addr +
-- (commonring->r_ptr * commonring->item_len);
--
-- commonring->r_ptr += *n_items;
-- if (commonring->r_ptr == commonring->depth)
-- commonring->r_ptr = 0;
--
-- return ret_addr;
-+ return commonring->buf_addr +
-+ (commonring->r_ptr * commonring->item_len);
- }
-
-
--int brcmf_commonring_read_complete(struct brcmf_commonring *commonring)
-+int brcmf_commonring_read_complete(struct brcmf_commonring *commonring,
-+ u16 n_items)
- {
-+ commonring->r_ptr += n_items;
-+ if (commonring->r_ptr == commonring->depth)
-+ commonring->r_ptr = 0;
-+
- if (commonring->cr_write_rptr)
- return commonring->cr_write_rptr(commonring->cr_ctx);
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/commonring.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/commonring.h
-@@ -62,7 +62,8 @@ void brcmf_commonring_write_cancel(struc
- u16 n_items);
- void *brcmf_commonring_get_read_ptr(struct brcmf_commonring *commonring,
- u16 *n_items);
--int brcmf_commonring_read_complete(struct brcmf_commonring *commonring);
-+int brcmf_commonring_read_complete(struct brcmf_commonring *commonring,
-+ u16 n_items);
-
- #define brcmf_commonring_n_items(commonring) (commonring->depth)
- #define brcmf_commonring_len_item(commonring) (commonring->item_len)
---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
-@@ -75,6 +75,8 @@
-
- #define BRCMF_MSGBUF_DELAY_TXWORKER_THRS 96
- #define BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS 32
-+#define BRCMF_MSGBUF_UPDATE_RX_PTR_THRS 48
-+
-
- struct msgbuf_common_hdr {
- u8 msgtype;
-@@ -1257,19 +1259,27 @@ static void brcmf_msgbuf_process_rx(stru
- {
- void *buf;
- u16 count;
-+ u16 processed;
-
- again:
- buf = brcmf_commonring_get_read_ptr(commonring, &count);
- if (buf == NULL)
- return;
-
-+ processed = 0;
- while (count) {
- brcmf_msgbuf_process_msgtype(msgbuf,
- buf + msgbuf->rx_dataoffset);
- buf += brcmf_commonring_len_item(commonring);
-+ processed++;
-+ if (processed == BRCMF_MSGBUF_UPDATE_RX_PTR_THRS) {
-+ brcmf_commonring_read_complete(commonring, processed);
-+ processed = 0;
-+ }
- count--;
- }
-- brcmf_commonring_read_complete(commonring);
-+ if (processed)
-+ brcmf_commonring_read_complete(commonring, processed);
-
- if (commonring->r_ptr == 0)
- goto again;
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Mon, 8 Jun 2015 14:38:33 +0200
-Subject: [PATCH] brcmfmac: remove chipinfo debugfs entry
-
-The information provided by chipinfo is also provided by the
-revinfo debugfs entry. Removing it from debugfs.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-@@ -41,15 +41,6 @@ void brcmf_debugfs_exit(void)
- root_folder = NULL;
- }
-
--static int brcmf_debugfs_chipinfo_read(struct seq_file *seq, void *data)
--{
-- struct brcmf_bus *bus = dev_get_drvdata(seq->private);
--
-- seq_printf(seq, "chip: %x(%u) rev %u\n",
-- bus->chip, bus->chip, bus->chiprev);
-- return 0;
--}
--
- int brcmf_debugfs_attach(struct brcmf_pub *drvr)
- {
- struct device *dev = drvr->bus_if->dev;
-@@ -58,7 +49,6 @@ int brcmf_debugfs_attach(struct brcmf_pu
- return -ENODEV;
-
- drvr->dbgfs_dir = debugfs_create_dir(dev_name(dev), root_folder);
-- brcmf_debugfs_add_entry(drvr, "chipinfo", brcmf_debugfs_chipinfo_read);
-
- return PTR_ERR_OR_ZERO(drvr->dbgfs_dir);
- }
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Mon, 8 Jun 2015 14:38:34 +0200
-Subject: [PATCH] brcmfmac: remove watchdog reset from
- brcmf_pcie_buscoreprep()
-
-The watchdog reset as done in brcmf_pcie_buscoreprep() is not
-sufficient. It needs to modify PCIe core registers as well
-which is properly done by brcmf_pcie_reset_device() after the
-chip recognition is done. So the faulty watchdog reset can be
-removed as it was causing driver reload to fail and hang the
-system requiring a power-cycle. Instead the call to to the
-brcmf_pcie_reset_device() function is done twice in the unload.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
-@@ -1629,20 +1629,7 @@ static void brcmf_pcie_buscore_write32(v
-
- static int brcmf_pcie_buscoreprep(void *ctx)
- {
-- struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)ctx;
-- int err;
--
-- err = brcmf_pcie_get_resource(devinfo);
-- if (err == 0) {
-- /* Set CC watchdog to reset all the cores on the chip to bring
-- * back dongle to a sane state.
-- */
-- brcmf_pcie_buscore_write32(ctx, CORE_CC_REG(SI_ENUM_BASE,
-- watchdog), 4);
-- msleep(100);
-- }
--
-- return err;
-+ return brcmf_pcie_get_resource(ctx);
- }
-
-
-@@ -1824,6 +1811,7 @@ brcmf_pcie_remove(struct pci_dev *pdev)
- brcmf_pcie_intr_disable(devinfo);
-
- brcmf_detach(&pdev->dev);
-+ brcmf_pcie_reset_device(devinfo);
-
- kfree(bus->bus_priv.pcie);
- kfree(bus->msgbuf->flowrings);
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Mon, 8 Jun 2015 14:38:35 +0200
-Subject: [PATCH] brcmfmac: use debugfs_create_devm_seqfile() helper
- function
-
-Some time ago the function debugfs_create_devm_seqfile() was
-introduced in debugfs. The caller simply needs to provide a
-device pointer and read function. The function brcmf_debugfs_add_entry()
-is now simply a wrapper only doing the work for CONFIG_BRCMDBG.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.c
-@@ -64,44 +64,12 @@ struct dentry *brcmf_debugfs_get_devdir(
- return drvr->dbgfs_dir;
- }
-
--struct brcmf_debugfs_entry {
-- int (*read)(struct seq_file *seq, void *data);
-- struct brcmf_pub *drvr;
--};
--
--static int brcmf_debugfs_entry_open(struct inode *inode, struct file *f)
--{
-- struct brcmf_debugfs_entry *entry = inode->i_private;
--
-- return single_open(f, entry->read, entry->drvr->bus_if->dev);
--}
--
--static const struct file_operations brcmf_debugfs_def_ops = {
-- .owner = THIS_MODULE,
-- .open = brcmf_debugfs_entry_open,
-- .release = single_release,
-- .read = seq_read,
-- .llseek = seq_lseek
--};
--
- int brcmf_debugfs_add_entry(struct brcmf_pub *drvr, const char *fn,
- int (*read_fn)(struct seq_file *seq, void *data))
- {
-- struct dentry *dentry = drvr->dbgfs_dir;
-- struct brcmf_debugfs_entry *entry;
--
-- if (IS_ERR_OR_NULL(dentry))
-- return -ENOENT;
--
-- entry = devm_kzalloc(drvr->bus_if->dev, sizeof(*entry), GFP_KERNEL);
-- if (!entry)
-- return -ENOMEM;
--
-- entry->read = read_fn;
-- entry->drvr = drvr;
--
-- dentry = debugfs_create_file(fn, S_IRUGO, dentry, entry,
-- &brcmf_debugfs_def_ops);
-+ struct dentry *e;
-
-- return PTR_ERR_OR_ZERO(dentry);
-+ e = debugfs_create_devm_seqfile(drvr->bus_if->dev, fn,
-+ drvr->dbgfs_dir, read_fn);
-+ return PTR_ERR_OR_ZERO(e);
- }
+++ /dev/null
-From: Pontus Fuchs <pontusf@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:17 +0200
-Subject: [PATCH] brcmfmac: Check if firmware supports p2p
-
-Add a feature flag to reflect the firmware's p2p capability.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Signed-off-by: Pontus Fuchs <pontusf@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
-@@ -129,6 +129,7 @@ void brcmf_feat_attach(struct brcmf_pub
- brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
- if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID)
- brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
-+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_P2P, "p2p");
-
- /* set chip related quirks */
- switch (drvr->bus_if->chip) {
---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h
-@@ -23,12 +23,14 @@
- * MCHAN: multi-channel for concurrent P2P.
- * PNO: preferred network offload.
- * WOWL: Wake-On-WLAN.
-+ * P2P: peer-to-peer
- */
- #define BRCMF_FEAT_LIST \
- BRCMF_FEAT_DEF(MBSS) \
- BRCMF_FEAT_DEF(MCHAN) \
- BRCMF_FEAT_DEF(PNO) \
-- BRCMF_FEAT_DEF(WOWL)
-+ BRCMF_FEAT_DEF(WOWL) \
-+ BRCMF_FEAT_DEF(P2P)
- /*
- * Quirks:
- *
+++ /dev/null
-From: Pontus Fuchs <pontusf@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:18 +0200
-Subject: [PATCH] brcmfmac: Build wiphy mode and interface combinations
- dynamically
-
-Switch from using semi hard coded interface combinations. This makes
-it easier to announce what the firmware actually supports. This fixes
-the case where brcmfmac announces p2p but the firmware doesn't
-support it.
-
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Signed-off-by: Pontus Fuchs <pontusf@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -52,8 +52,6 @@
- #define BRCMF_PNO_SCAN_COMPLETE 1
- #define BRCMF_PNO_SCAN_INCOMPLETE 0
-
--#define BRCMF_IFACE_MAX_CNT 3
--
- #define WPA_OUI "\x00\x50\xF2" /* WPA OUI */
- #define WPA_OUI_TYPE 1
- #define RSN_OUI "\x00\x0F\xAC" /* RSN OUI */
-@@ -5639,53 +5637,6 @@ static int brcmf_setup_wiphybands(struct
- return 0;
- }
-
--static const struct ieee80211_iface_limit brcmf_iface_limits_mbss[] = {
-- {
-- .max = 1,
-- .types = BIT(NL80211_IFTYPE_STATION) |
-- BIT(NL80211_IFTYPE_ADHOC)
-- },
-- {
-- .max = 4,
-- .types = BIT(NL80211_IFTYPE_AP)
-- },
-- {
-- .max = 1,
-- .types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
-- BIT(NL80211_IFTYPE_P2P_GO)
-- },
-- {
-- .max = 1,
-- .types = BIT(NL80211_IFTYPE_P2P_DEVICE)
-- }
--};
--
--static const struct ieee80211_iface_limit brcmf_iface_limits_sbss[] = {
-- {
-- .max = 2,
-- .types = BIT(NL80211_IFTYPE_STATION) |
-- BIT(NL80211_IFTYPE_ADHOC) |
-- BIT(NL80211_IFTYPE_AP)
-- },
-- {
-- .max = 1,
-- .types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
-- BIT(NL80211_IFTYPE_P2P_GO)
-- },
-- {
-- .max = 1,
-- .types = BIT(NL80211_IFTYPE_P2P_DEVICE)
-- }
--};
--static struct ieee80211_iface_combination brcmf_iface_combos[] = {
-- {
-- .max_interfaces = BRCMF_IFACE_MAX_CNT,
-- .num_different_channels = 1,
-- .n_limits = ARRAY_SIZE(brcmf_iface_limits_sbss),
-- .limits = brcmf_iface_limits_sbss,
-- }
--};
--
- static const struct ieee80211_txrx_stypes
- brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = {
- [NL80211_IFTYPE_STATION] = {
-@@ -5715,6 +5666,67 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] =
- }
- };
-
-+static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
-+{
-+ struct ieee80211_iface_combination *combo = NULL;
-+ struct ieee80211_iface_limit *limits = NULL;
-+ int i = 0, max_iface_cnt;
-+
-+ combo = kzalloc(sizeof(*combo), GFP_KERNEL);
-+ if (!combo)
-+ goto err;
-+
-+ limits = kzalloc(sizeof(*limits) * 4, GFP_KERNEL);
-+ if (!limits)
-+ goto err;
-+
-+ wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
-+ BIT(NL80211_IFTYPE_ADHOC) |
-+ BIT(NL80211_IFTYPE_AP);
-+
-+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
-+ combo->num_different_channels = 2;
-+ else
-+ combo->num_different_channels = 1;
-+
-+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) {
-+ limits[i].max = 1;
-+ limits[i++].types = BIT(NL80211_IFTYPE_STATION);
-+ limits[i].max = 4;
-+ limits[i++].types = BIT(NL80211_IFTYPE_AP);
-+ max_iface_cnt = 5;
-+ } else {
-+ limits[i].max = 2;
-+ limits[i++].types = BIT(NL80211_IFTYPE_STATION) |
-+ BIT(NL80211_IFTYPE_AP);
-+ max_iface_cnt = 2;
-+ }
-+
-+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P)) {
-+ wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
-+ BIT(NL80211_IFTYPE_P2P_GO) |
-+ BIT(NL80211_IFTYPE_P2P_DEVICE);
-+ limits[i].max = 1;
-+ limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
-+ BIT(NL80211_IFTYPE_P2P_GO);
-+ limits[i].max = 1;
-+ limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
-+ max_iface_cnt += 2;
-+ }
-+ combo->max_interfaces = max_iface_cnt;
-+ combo->limits = limits;
-+ combo->n_limits = i;
-+
-+ wiphy->iface_combinations = combo;
-+ wiphy->n_iface_combinations = 1;
-+ return 0;
-+
-+err:
-+ kfree(limits);
-+ kfree(combo);
-+ return -ENOMEM;
-+}
-+
- static void brcmf_wiphy_pno_params(struct wiphy *wiphy)
- {
- /* scheduled scan settings */
-@@ -5745,7 +5757,6 @@ static void brcmf_wiphy_wowl_params(stru
- static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
- {
- struct ieee80211_supported_band *band;
-- struct ieee80211_iface_combination ifc_combo;
- __le32 bandlist[3];
- u32 n_bands;
- int err, i;
-@@ -5753,24 +5764,11 @@ static int brcmf_setup_wiphy(struct wiph
- wiphy->max_scan_ssids = WL_NUM_SCAN_MAX;
- wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
- wiphy->max_num_pmkids = WL_NUM_PMKIDS_MAX;
-- wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
-- BIT(NL80211_IFTYPE_ADHOC) |
-- BIT(NL80211_IFTYPE_AP) |
-- BIT(NL80211_IFTYPE_P2P_CLIENT) |
-- BIT(NL80211_IFTYPE_P2P_GO) |
-- BIT(NL80211_IFTYPE_P2P_DEVICE);
-- /* need VSDB firmware feature for concurrent channels */
-- ifc_combo = brcmf_iface_combos[0];
-- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
-- ifc_combo.num_different_channels = 2;
-- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) {
-- ifc_combo.n_limits = ARRAY_SIZE(brcmf_iface_limits_mbss),
-- ifc_combo.limits = brcmf_iface_limits_mbss;
-- }
-- wiphy->iface_combinations = kmemdup(&ifc_combo,
-- sizeof(ifc_combo),
-- GFP_KERNEL);
-- wiphy->n_iface_combinations = ARRAY_SIZE(brcmf_iface_combos);
-+
-+ err = brcmf_setup_ifmodes(wiphy, ifp);
-+ if (err)
-+ return err;
-+
- wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
- wiphy->cipher_suites = __wl_cipher_suites;
- wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites);
-@@ -6035,6 +6033,8 @@ static void brcmf_free_wiphy(struct wiph
- if (!wiphy)
- return;
-
-+ if (wiphy->iface_combinations)
-+ kfree(wiphy->iface_combinations->limits);
- kfree(wiphy->iface_combinations);
- if (wiphy->bands[IEEE80211_BAND_2GHZ]) {
- kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:19 +0200
-Subject: [PATCH] brcmfmac: rework .get_station() callback
-
-The .get_station() cfg80211 callback is used in several scenarios. In
-managed mode it can obtain information about the access-point and its
-BSS parameters. In managed mode it can also obtain information about
-TDLS peers. In AP mode it can obtain information about connected
-clients.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-@@ -2395,27 +2395,80 @@ brcmf_cfg80211_reconfigure_wep(struct br
- brcmf_err("set wsec error (%d)\n", err);
- }
-
-+static void brcmf_convert_sta_flags(u32 fw_sta_flags, struct station_info *si)
-+{
-+ struct nl80211_sta_flag_update *sfu;
-+
-+ brcmf_dbg(TRACE, "flags %08x\n", fw_sta_flags);
-+ si->filled |= BIT(NL80211_STA_INFO_STA_FLAGS);
-+ sfu = &si->sta_flags;
-+ sfu->mask = BIT(NL80211_STA_FLAG_WME) |
-+ BIT(NL80211_STA_FLAG_AUTHENTICATED) |
-+ BIT(NL80211_STA_FLAG_ASSOCIATED) |
-+ BIT(NL80211_STA_FLAG_AUTHORIZED);
-+ if (fw_sta_flags & BRCMF_STA_WME)
-+ sfu->set |= BIT(NL80211_STA_FLAG_WME);
-+ if (fw_sta_flags & BRCMF_STA_AUTHE)
-+ sfu->set |= BIT(NL80211_STA_FLAG_AUTHENTICATED);
-+ if (fw_sta_flags & BRCMF_STA_ASSOC)
-+ sfu->set |= BIT(NL80211_STA_FLAG_ASSOCIATED);
-+ if (fw_sta_flags & BRCMF_STA_AUTHO)
-+ sfu->set |= BIT(NL80211_STA_FLAG_AUTHORIZED);
-+}
-+
-+static void brcmf_fill_bss_param(struct brcmf_if *ifp, struct station_info *si)
-+{
-+ struct {
-+ __le32 len;
-+ struct brcmf_bss_info_le bss_le;
-+ } *buf;
-+ u16 capability;
-+ int err;
-+
-+ buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL);
-+ if (!buf)
-+ return;
-+
-+ buf->len = cpu_to_le32(WL_BSS_INFO_MAX);
-+ err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, buf,
-+ WL_BSS_INFO_MAX);
-+ if (err) {
-+ brcmf_err("Failed to get bss info (%d)\n", err);
-+ return;
-+ }
-+ si->filled |= BIT(NL80211_STA_INFO_BSS_PARAM);
-+ si->bss_param.beacon_interval = le16_to_cpu(buf->bss_le.beacon_period);
-+ si->bss_param.dtim_period = buf->bss_le.dtim_period;
-+ capability = le16_to_cpu(buf->bss_le.capability);
-+ if (capability & IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT)
-+ si->bss_param.flags |= BSS_PARAM_FLAGS_CTS_PROT;
-+ if (capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
-+ si->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_PREAMBLE;
-+ if (capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
-+ si->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_SLOT_TIME;
-+}
-+
- static s32
- brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
- const u8 *mac, struct station_info *sinfo)
- {
- struct brcmf_if *ifp = netdev_priv(ndev);
-- struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
-- struct brcmf_scb_val_le scb_val;
-- int rssi;
-- s32 rate;
- s32 err = 0;
-- u8 *bssid = profile->bssid;
- struct brcmf_sta_info_le sta_info_le;
-- u32 beacon_period;
-- u32 dtim_period;
-+ u32 sta_flags;
-+ u32 is_tdls_peer;
-
- brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac);
- if (!check_vif_up(ifp->vif))
- return -EIO;
-
-- if (brcmf_is_apmode(ifp->vif)) {
-- memcpy(&sta_info_le, mac, ETH_ALEN);
-+ memset(&sta_info_le, 0, sizeof(sta_info_le));
-+ memcpy(&sta_info_le, mac, ETH_ALEN);
-+ err = brcmf_fil_iovar_data_get(ifp, "tdls_sta_info",
-+ &sta_info_le,
-+ sizeof(sta_info_le));
-+ is_tdls_peer = !err;
-+ if (err) {
- err = brcmf_fil_iovar_data_get(ifp, "sta_info",
- &sta_info_le,
- sizeof(sta_info_le));
-@@ -2423,73 +2476,48 @@ brcmf_cfg80211_get_station(struct wiphy
- brcmf_err("GET STA INFO failed, %d\n", err);
- goto done;
- }
-- sinfo->filled = BIT(NL80211_STA_INFO_INACTIVE_TIME);
-- sinfo->inactive_time = le32_to_cpu(sta_info_le.idle) * 1000;
-- if (le32_to_cpu(sta_info_le.flags) & BRCMF_STA_ASSOC) {
-- sinfo->filled |= BIT(NL80211_STA_INFO_CONNECTED_TIME);
-- sinfo->connected_time = le32_to_cpu(sta_info_le.in);
-- }
-- brcmf_dbg(TRACE, "STA idle time : %d ms, connected time :%d sec\n",
-- sinfo->inactive_time, sinfo->connected_time);
-- } else if (ifp->vif->wdev.iftype == NL80211_IFTYPE_STATION) {
-- if (memcmp(mac, bssid, ETH_ALEN)) {
-- brcmf_err("Wrong Mac address cfg_mac-%pM wl_bssid-%pM\n",
-- mac, bssid);
-- err = -ENOENT;
-- goto done;
-- }
-- /* Report the current tx rate */
-- err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_RATE, &rate);
-- if (err) {
-- brcmf_err("Could not get rate (%d)\n", err);
-- goto done;
-- } else {
-+ }
-+ brcmf_dbg(TRACE, "version %d\n", le16_to_cpu(sta_info_le.ver));
-+ sinfo->filled = BIT(NL80211_STA_INFO_INACTIVE_TIME);
-+ sinfo->inactive_time = le32_to_cpu(sta_info_le.idle) * 1000;
-+ sta_flags = le32_to_cpu(sta_info_le.flags);
-+ brcmf_convert_sta_flags(sta_flags, sinfo);
-+ sinfo->sta_flags.mask |= BIT(NL80211_STA_FLAG_TDLS_PEER);
-+ if (is_tdls_peer)
-+ sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER);
-+ else
-+ sinfo->sta_flags.set &= ~BIT(NL80211_STA_FLAG_TDLS_PEER);
-+ if (sta_flags & BRCMF_STA_ASSOC) {
-+ sinfo->filled |= BIT(NL80211_STA_INFO_CONNECTED_TIME);
-+ sinfo->connected_time = le32_to_cpu(sta_info_le.in);
-+ brcmf_fill_bss_param(ifp, sinfo);
-+ }
-+ if (sta_flags & BRCMF_STA_SCBSTATS) {
-+ sinfo->filled |= BIT(NL80211_STA_INFO_TX_FAILED);
-+ sinfo->tx_failed = le32_to_cpu(sta_info_le.tx_failures);
-+ sinfo->filled |= BIT(NL80211_STA_INFO_TX_PACKETS);
-+ sinfo->tx_packets = le32_to_cpu(sta_info_le.tx_pkts);
-+ sinfo->tx_packets += le32_to_cpu(sta_info_le.tx_mcast_pkts);
-+ sinfo->filled |= BIT(NL80211_STA_INFO_RX_PACKETS);
-+ sinfo->rx_packets = le32_to_cpu(sta_info_le.rx_ucast_pkts);
-+ sinfo->rx_packets += le32_to_cpu(sta_info_le.rx_mcast_pkts);
-+ if (sinfo->tx_packets) {
- sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE);
-- sinfo->txrate.legacy = rate * 5;
-- brcmf_dbg(CONN, "Rate %d Mbps\n", rate / 2);
-+ sinfo->txrate.legacy = le32_to_cpu(sta_info_le.tx_rate);
-+ sinfo->txrate.legacy /= 100;
- }
--
-- if (test_bit(BRCMF_VIF_STATUS_CONNECTED,
-- &ifp->vif->sme_state)) {
-- memset(&scb_val, 0, sizeof(scb_val));
-- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI,
-- &scb_val, sizeof(scb_val));
-- if (err) {
-- brcmf_err("Could not get rssi (%d)\n", err);
-- goto done;
-- } else {
-- rssi = le32_to_cpu(scb_val.val);
-- sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL);
-- sinfo->signal = rssi;
-- brcmf_dbg(CONN, "RSSI %d dBm\n", rssi);
-- }
-- err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_BCNPRD,
-- &beacon_period);
-- if (err) {
-- brcmf_err("Could not get beacon period (%d)\n",
-- err);
-- goto done;
-- } else {
-- sinfo->bss_param.beacon_interval =
-- beacon_period;
-- brcmf_dbg(CONN, "Beacon peroid %d\n",
-- beacon_period);
-- }
-- err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_DTIMPRD,
-- &dtim_period);
-- if (err) {
-- brcmf_err("Could not get DTIM period (%d)\n",
-- err);
-- goto done;
-- } else {
-- sinfo->bss_param.dtim_period = dtim_period;
-- brcmf_dbg(CONN, "DTIM peroid %d\n",
-- dtim_period);
-- }
-- sinfo->filled |= BIT(NL80211_STA_INFO_BSS_PARAM);
-+ if (sinfo->rx_packets) {
-+ sinfo->filled |= BIT(NL80211_STA_INFO_RX_BITRATE);
-+ sinfo->rxrate.legacy = le32_to_cpu(sta_info_le.rx_rate);
-+ sinfo->rxrate.legacy /= 100;
-+ }
-+ if (le16_to_cpu(sta_info_le.ver) >= 4) {
-+ sinfo->filled |= BIT(NL80211_STA_INFO_TX_BYTES);
-+ sinfo->tx_bytes = le64_to_cpu(sta_info_le.tx_tot_bytes);
-+ sinfo->filled |= BIT(NL80211_STA_INFO_RX_BYTES);
-+ sinfo->rx_bytes = le64_to_cpu(sta_info_le.rx_tot_bytes);
- }
-- } else
-- err = -EPERM;
-+ }
- done:
- brcmf_dbg(TRACE, "Exit\n");
- return err;
---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
-@@ -32,7 +32,11 @@
- #define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */
- #define BRCMF_BSS_RSSI_ON_CHANNEL 0x0002
-
--#define BRCMF_STA_ASSOC 0x10 /* Associated */
-+#define BRCMF_STA_WME 0x00000002 /* WMM association */
-+#define BRCMF_STA_AUTHE 0x00000008 /* Authenticated */
-+#define BRCMF_STA_ASSOC 0x00000010 /* Associated */
-+#define BRCMF_STA_AUTHO 0x00000020 /* Authorized */
-+#define BRCMF_STA_SCBSTATS 0x00004000 /* Per STA debug stats */
-
- /* size of brcmf_scan_params not including variable length array */
- #define BRCMF_SCAN_PARAMS_FIXED_SIZE 64
-@@ -113,6 +117,7 @@
- #define BRCMF_WOWL_MAXPATTERNSIZE 128
-
- #define BRCMF_COUNTRY_BUF_SZ 4
-+#define BRCMF_ANT_MAX 4
-
- /* join preference types for join_pref iovar */
- enum brcmf_join_pref_types {
-@@ -456,25 +461,61 @@ struct brcmf_channel_info_le {
- };
-
- struct brcmf_sta_info_le {
-- __le16 ver; /* version of this struct */
-- __le16 len; /* length in bytes of this structure */
-- __le16 cap; /* sta's advertised capabilities */
-- __le32 flags; /* flags defined below */
-- __le32 idle; /* time since data pkt rx'd from sta */
-- u8 ea[ETH_ALEN]; /* Station address */
-- __le32 count; /* # rates in this set */
-- u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */
-+ __le16 ver; /* version of this struct */
-+ __le16 len; /* length in bytes of this structure */
-+ __le16 cap; /* sta's advertised capabilities */
-+ __le32 flags; /* flags defined below */
-+ __le32 idle; /* time since data pkt rx'd from sta */
-+ u8 ea[ETH_ALEN]; /* Station address */
-+ __le32 count; /* # rates in this set */
-+ u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */
- /* w/hi bit set if basic */
-- __le32 in; /* seconds elapsed since associated */
-- __le32 listen_interval_inms; /* Min Listen interval in ms for STA */
-- __le32 tx_pkts; /* # of packets transmitted */
-- __le32 tx_failures; /* # of packets failed */
-- __le32 rx_ucast_pkts; /* # of unicast packets received */
-- __le32 rx_mcast_pkts; /* # of multicast packets received */
-- __le32 tx_rate; /* Rate of last successful tx frame */
-- __le32 rx_rate; /* Rate of last successful rx frame */
-- __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */
-- __le32 rx_decrypt_failures; /* # of packet decrypted failed */
-+ __le32 in; /* seconds elapsed since associated */
-+ __le32 listen_interval_inms; /* Min Listen interval in ms for STA */
-+ __le32 tx_pkts; /* # of packets transmitted */
-+ __le32 tx_failures; /* # of packets failed */
-+ __le32 rx_ucast_pkts; /* # of unicast packets received */
-+ __le32 rx_mcast_pkts; /* # of multicast packets received */
-+ __le32 tx_rate; /* Rate of last successful tx frame */
-+ __le32 rx_rate; /* Rate of last successful rx frame */
-+ __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */
-+ __le32 rx_decrypt_failures; /* # of packet decrypted failed */
-+ __le32 tx_tot_pkts; /* # of tx pkts (ucast + mcast) */
-+ __le32 rx_tot_pkts; /* # of data packets recvd (uni + mcast) */
-+ __le32 tx_mcast_pkts; /* # of mcast pkts txed */
-+ __le64 tx_tot_bytes; /* data bytes txed (ucast + mcast) */
-+ __le64 rx_tot_bytes; /* data bytes recvd (ucast + mcast) */
-+ __le64 tx_ucast_bytes; /* data bytes txed (ucast) */
-+ __le64 tx_mcast_bytes; /* # data bytes txed (mcast) */
-+ __le64 rx_ucast_bytes; /* data bytes recvd (ucast) */
-+ __le64 rx_mcast_bytes; /* data bytes recvd (mcast) */
-+ s8 rssi[BRCMF_ANT_MAX]; /* per antenna rssi */
-+ s8 nf[BRCMF_ANT_MAX]; /* per antenna noise floor */
-+ __le16 aid; /* association ID */
-+ __le16 ht_capabilities; /* advertised ht caps */
-+ __le16 vht_flags; /* converted vht flags */
-+ __le32 tx_pkts_retry_cnt; /* # of frames where a retry was
-+ * exhausted.
-+ */
-+ __le32 tx_pkts_retry_exhausted; /* # of user frames where a retry
-+ * was exhausted
-+ */
-+ s8 rx_lastpkt_rssi[BRCMF_ANT_MAX]; /* Per antenna RSSI of last
-+ * received data frame.
-+ */
-+ /* TX WLAN retry/failure statistics:
-+ * Separated for host requested frames and locally generated frames.
-+ * Include unicast frame only where the retries/failures can be counted.
-+ */
-+ __le32 tx_pkts_total; /* # user frames sent successfully */
-+ __le32 tx_pkts_retries; /* # user frames retries */
-+ __le32 tx_pkts_fw_total; /* # FW generated sent successfully */
-+ __le32 tx_pkts_fw_retries; /* # retries for FW generated frames */
-+ __le32 tx_pkts_fw_retry_exhausted; /* # FW generated where a retry
-+ * was exhausted
-+ */
-+ __le32 rx_pkts_retried; /* # rx with retry bit set */
-+ __le32 tx_rate_fallback; /* lowest fallback TX rate */
- };
-
- struct brcmf_chanspec_list {
+++ /dev/null
-From: Arend van Spriel <arend@broadcom.com>
-Date: Thu, 11 Jun 2015 00:12:20 +0200
-Subject: [PATCH] brcmfmac: have sdio return -EIO when device communication
- is not possible
-
-The bus interface functions txctl and rxctl may be used while the device
-can not be accessed, eg. upon driver .remove() callback. This patch will
-immediately return -EIO when this is the case which speeds up the module
-unload.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -988,6 +988,7 @@ static void brcmf_sdiod_freezer_detach(s
-
- static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
- {
-+ sdiodev->state = BRCMF_SDIOD_DOWN;
- if (sdiodev->bus) {
- brcmf_sdio_remove(sdiodev->bus);
- sdiodev->bus = NULL;
---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
-@@ -2820,6 +2820,8 @@ static int brcmf_sdio_bus_txdata(struct
- struct brcmf_sdio *bus = sdiodev->bus;
-
- brcmf_dbg(TRACE, "Enter: pkt: data %p len %d\n", pkt->data, pkt->len);
-+ if (sdiodev->state != BRCMF_SDIOD_DATA)
-+ return -EIO;
-
- /* Add space for the header */
- skb_push(pkt, bus->tx_hdrlen);
-@@ -2948,6 +2950,8 @@ brcmf_sdio_bus_txctl(struct device *dev,
- int ret;
-
- brcmf_dbg(TRACE, "Enter\n");
-+ if (sdiodev->state != BRCMF_SDIOD_DATA)
-+ return -EIO;
-
- /* Send from dpc */
- bus->ctrl_frame_buf = msg;
-@@ -3238,6 +3242,8 @@ brcmf_sdio_bus_rxctl(struct device *dev,
- struct brcmf_sdio *bus = sdiodev->bus;
-
- brcmf_dbg(TRACE, "Enter\n");
-+ if (sdiodev->state != BRCMF_SDIOD_DATA)
-+ return -EIO;
-
- /* Wait until control frame is available */
- timeleft = brcmf_sdio_dcmd_resp_wait(bus, &bus->rxlen, &pending);
+++ /dev/null
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Thu, 2 Jul 2015 13:35:05 +0200
-Subject: [PATCH] ath9k: make DMA stop related messages debug-only
-
-A long time ago, ath9k had issues during reset where the DMA engine
-would stay active and could potentially corrupt memory.
-To debug those issues, the driver would print warnings whenever they
-occur.
-
-Nowadays, these issues are gone and the primary cause of these messages
-is if the MAC is stuck during reset or busy processing a long
-transmission. This is fairly harmless, yet these messages continue to
-worry users.
-
-To reduce the number of bogus bug reports, turn these messages into
-debug messages and count their occurence in the "reset" debugfs file.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/debug.c
-+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -765,6 +765,8 @@ static int read_file_reset(struct seq_fi
- [RESET_TYPE_BEACON_STUCK] = "Stuck Beacon",
- [RESET_TYPE_MCI] = "MCI Reset",
- [RESET_TYPE_CALIBRATION] = "Calibration error",
-+ [RESET_TX_DMA_ERROR] = "Tx DMA stop error",
-+ [RESET_RX_DMA_ERROR] = "Rx DMA stop error",
- };
- int i;
-
---- a/drivers/net/wireless/ath/ath9k/debug.h
-+++ b/drivers/net/wireless/ath/ath9k/debug.h
-@@ -50,6 +50,8 @@ enum ath_reset_type {
- RESET_TYPE_BEACON_STUCK,
- RESET_TYPE_MCI,
- RESET_TYPE_CALIBRATION,
-+ RESET_TX_DMA_ERROR,
-+ RESET_RX_DMA_ERROR,
- __RESET_TYPE_MAX
- };
-
---- a/drivers/net/wireless/ath/ath9k/recv.c
-+++ b/drivers/net/wireless/ath/ath9k/recv.c
-@@ -496,10 +496,9 @@ bool ath_stoprecv(struct ath_softc *sc)
-
- if (!(ah->ah_flags & AH_UNPLUGGED) &&
- unlikely(!stopped)) {
-- ath_err(ath9k_hw_common(sc->sc_ah),
-- "Could not stop RX, we could be "
-- "confusing the DMA engine when we start RX up\n");
-- ATH_DBG_WARN_ON_ONCE(!stopped);
-+ ath_dbg(ath9k_hw_common(sc->sc_ah), RESET,
-+ "Failed to stop Rx DMA\n");
-+ RESET_STAT_INC(sc, RESET_RX_DMA_ERROR);
- }
- return stopped && !reset;
- }
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -1896,8 +1896,11 @@ bool ath_drain_all_txq(struct ath_softc
- npend |= BIT(i);
- }
-
-- if (npend)
-- ath_err(common, "Failed to stop TX DMA, queues=0x%03x!\n", npend);
-+ if (npend) {
-+ RESET_STAT_INC(sc, RESET_TX_DMA_ERROR);
-+ ath_dbg(common, RESET,
-+ "Failed to stop TX DMA, queues=0x%03x!\n", npend);
-+ }
-
- for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
- if (!ATH_TXQ_SETUP(sc, i))
ccflags-y += -D__CHECK_ENDIAN__
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
-@@ -316,13 +316,6 @@ void _ath_dbg(struct ath_common *common,
+@@ -318,13 +318,6 @@ void _ath_dbg(struct ath_common *common,
#endif /* CPTCFG_ATH_DEBUG */
/** Returns string describing opmode, or NULL if unknown mode. */
---help---
--- a/.local-symbols
+++ b/.local-symbols
-@@ -89,6 +89,7 @@ RTL8187_LEDS=
+@@ -137,6 +137,7 @@ RTL8187_LEDS=
ATH_COMMON=
ATH_CARDS=
ATH_DEBUG=
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
-@@ -2368,6 +2368,8 @@ void regulatory_hint_country_ie(struct w
+@@ -2391,6 +2391,8 @@ void regulatory_hint_country_ie(struct w
enum environment_cap env = ENVIRON_ANY;
struct regulatory_request *request = NULL, *lr;
/* IE len must be evenly divisible by 2 */
if (country_ie_len & 0x01)
return;
-@@ -2571,6 +2573,7 @@ static void restore_regulatory_settings(
+@@ -2597,6 +2599,7 @@ static void restore_regulatory_settings(
void regulatory_hint_disconnect(void)
{
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -715,6 +715,7 @@ static const struct ieee80211_iface_limi
+@@ -722,6 +722,7 @@ static const struct ieee80211_iface_limi
BIT(NL80211_IFTYPE_AP) },
{ .max = 1, .types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO) },
debugfs_create_file("antenna", S_IWUSR | S_IRUSR, phydir, ah,
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
-@@ -1371,6 +1371,7 @@ struct ath5k_hw {
+@@ -1370,6 +1370,7 @@ struct ath5k_hw {
u8 ah_coverage_class;
bool ah_ack_bitrate_high;
u8 ah_bwmode;
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1299,6 +1299,53 @@ void ath9k_deinit_debug(struct ath_softc
+@@ -1301,6 +1301,53 @@ void ath9k_deinit_debug(struct ath_softc
ath9k_cmn_spectral_deinit_debug(&sc->spec_priv);
}
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
-@@ -1318,6 +1365,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1320,6 +1367,8 @@ int ath9k_init_debug(struct ath_hw *ah)
ath9k_tx99_init_debug(sc);
ath9k_cmn_spectral_init_debug(&sc->spec_priv, sc->debug.debugfs_phy);
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -1023,23 +1023,23 @@ static int __init ath9k_init(void)
+@@ -1030,23 +1030,23 @@ static int __init ath9k_init(void)
{
int error;
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -389,13 +389,8 @@ static void ath9k_hw_init_config(struct
+@@ -390,13 +390,8 @@ static void ath9k_hw_init_config(struct
ah->config.rx_intr_mitigation = true;
+ ah->config.rimt_last = 250;
+ ah->config.rimt_first = 500;
- /*
- * We need this for PCI devices only (Cardbus, PCI, miniPCI)
+ if (AR_SREV_9462(ah) || AR_SREV_9565(ah))
+ ah->config.pll_pwrsave = 7;
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1346,6 +1346,52 @@ static const struct file_operations fops
+@@ -1348,6 +1348,52 @@ static const struct file_operations fops
.owner = THIS_MODULE
};
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
-@@ -1367,6 +1413,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1369,6 +1415,8 @@ int ath9k_init_debug(struct ath_hw *ah)
debugfs_create_file("eeprom", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_eeprom);
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -647,6 +647,7 @@ int ath9k_hw_init(struct ath_hw *ah)
+@@ -651,6 +651,7 @@ int ath9k_hw_init(struct ath_hw *ah)
/* These are all the AR5008/AR9001/AR9002/AR9003 hardware family of chipsets */
switch (ah->hw_version.devid) {
*
* @set_wds_peer: set the WDS peer for a WDS interface
*
-@@ -2576,6 +2577,7 @@ struct cfg80211_ops {
+@@ -2577,6 +2578,7 @@ struct cfg80211_ops {
enum nl80211_tx_power_setting type, int mbm);
int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev,
int *dbm);
const u8 *addr);
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
-@@ -1171,6 +1171,7 @@ enum ieee80211_smps_mode {
+@@ -1252,6 +1252,7 @@ enum ieee80211_smps_mode {
*
* @power_level: requested transmit power (in dBm), backward compatibility
* value only that is set to the minimum of all interfaces
*
* @chandef: the channel definition to tune to
* @radar_enabled: whether radar detection is enabled
-@@ -1192,6 +1193,7 @@ struct ieee80211_conf {
+@@ -1273,6 +1274,7 @@ struct ieee80211_conf {
u32 flags;
int power_level, dynamic_ps_timeout;
int max_sleep_period;
u8 ps_dtim_period;
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
-@@ -1760,6 +1760,9 @@ enum nl80211_commands {
+@@ -1761,6 +1761,9 @@ enum nl80211_commands {
* @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
* is operating in an indoor environment.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -2129,6 +2132,8 @@ enum nl80211_attrs {
+@@ -2130,6 +2133,8 @@ enum nl80211_attrs {
NL80211_ATTR_REG_INDOOR,
__NL80211_ATTR_AFTER_LAST,
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
-@@ -2208,6 +2208,19 @@ static int ieee80211_get_tx_power(struct
+@@ -2233,6 +2233,19 @@ static int ieee80211_get_tx_power(struct
return 0;
}
static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev,
const u8 *addr)
{
-@@ -3771,6 +3784,7 @@ const struct cfg80211_ops mac80211_confi
+@@ -3845,6 +3858,7 @@ const struct cfg80211_ops mac80211_confi
.set_wiphy_params = ieee80211_set_wiphy_params,
.set_tx_power = ieee80211_set_tx_power,
.get_tx_power = ieee80211_get_tx_power,
CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
-@@ -1333,6 +1333,7 @@ struct ieee80211_local {
+@@ -1318,6 +1318,7 @@ struct ieee80211_local {
int dynamic_ps_forced_timeout;
int user_power_level; /* in dBm, for all interfaces */
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
-@@ -98,7 +98,7 @@ static u32 ieee80211_hw_conf_chan(struct
+@@ -95,7 +95,7 @@ static u32 ieee80211_hw_conf_chan(struct
struct ieee80211_sub_if_data *sdata;
struct cfg80211_chan_def chandef = {};
u32 changed = 0;
u32 offchannel_flag;
offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
-@@ -155,6 +155,12 @@ static u32 ieee80211_hw_conf_chan(struct
+@@ -152,6 +152,12 @@ static u32 ieee80211_hw_conf_chan(struct
}
rcu_read_unlock();
if (local->hw.conf.power_level != power) {
changed |= IEEE80211_CONF_CHANGE_POWER;
local->hw.conf.power_level = power;
-@@ -578,6 +584,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
+@@ -581,6 +587,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
IEEE80211_RADIOTAP_MCS_HAVE_BW;
local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
-@@ -400,6 +400,7 @@ static const struct nla_policy nl80211_p
+@@ -402,6 +402,7 @@ static const struct nla_policy nl80211_p
[NL80211_ATTR_NETNS_FD] = { .type = NLA_U32 },
[NL80211_ATTR_SCHED_SCAN_DELAY] = { .type = NLA_U32 },
[NL80211_ATTR_REG_INDOOR] = { .type = NLA_FLAG },
void ath_fill_led_pin(struct ath_softc *sc)
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -935,7 +935,7 @@ int ath9k_init_device(u16 devid, struct
+@@ -942,7 +942,7 @@ int ath9k_init_device(u16 devid, struct
#ifdef CPTCFG_MAC80211_LEDS
/* must be initialized before ieee80211_register_hw */
#endif
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1391,6 +1391,61 @@ static const struct file_operations fops
+@@ -1393,6 +1393,61 @@ static const struct file_operations fops
.llseek = default_llseek,
};
int ath9k_init_debug(struct ath_hw *ah)
{
-@@ -1415,6 +1470,10 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1417,6 +1472,10 @@ int ath9k_init_debug(struct ath_hw *ah)
&fops_eeprom);
debugfs_create_file("chanbw", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
sc, &fops_chanbw);
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1447,6 +1447,50 @@ static const struct file_operations fops
+@@ -1449,6 +1449,50 @@ static const struct file_operations fops
#endif
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
-@@ -1474,6 +1518,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1476,6 +1520,8 @@ int ath9k_init_debug(struct ath_hw *ah)
debugfs_create_file("gpio_led", S_IWUSR,
sc->debug.debugfs_phy, sc, &fops_gpio_led);
#endif
debugfs_create_devm_seqfile(sc->dev, "interrupt", sc->debug.debugfs_phy,
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -513,6 +513,12 @@ enum {
+@@ -519,6 +519,12 @@ enum {
ATH9K_RESET_COLD,
};
struct ath9k_hw_version {
u32 magic;
u16 devid;
-@@ -794,6 +800,8 @@ struct ath_hw {
+@@ -804,6 +810,8 @@ struct ath_hw {
u32 rfkill_polarity;
u32 ah_flags;
bool reset_power_on;
bool htc_reset_init;
-@@ -1055,6 +1063,7 @@ void ath9k_hw_check_nav(struct ath_hw *a
+@@ -1066,6 +1074,7 @@ void ath9k_hw_check_nav(struct ath_hw *a
bool ath9k_hw_check_alive(struct ath_hw *ah);
bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode);
struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1804,6 +1804,20 @@ u32 ath9k_hw_get_tsf_offset(struct times
+@@ -1808,6 +1808,20 @@ u32 ath9k_hw_get_tsf_offset(struct times
}
EXPORT_SYMBOL(ath9k_hw_get_tsf_offset);
int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
struct ath9k_hw_cal_data *caldata, bool fastcc)
{
-@@ -2012,6 +2026,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -2016,6 +2030,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
ar9003_hw_disable_phy_restart(ah);
ath9k_hw_apply_gpio_override(ah);
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -710,6 +710,7 @@ struct ath_spec_scan {
+@@ -720,6 +720,7 @@ struct ath_spec_scan {
* @config_pci_powersave:
* @calibrate: periodic calibration for NF, ANI, IQ, ADC gain, ADC-DC
*
* @spectral_scan_config: set parameters for spectral scan and enable/disable it
* @spectral_scan_trigger: trigger a spectral scan run
* @spectral_scan_wait: wait for a spectral scan run to finish
-@@ -732,6 +733,7 @@ struct ath_hw_ops {
+@@ -742,6 +743,7 @@ struct ath_hw_ops {
struct ath_hw_antcomb_conf *antconf);
void (*antdiv_comb_conf_set)(struct ath_hw *ah,
struct ath_hw_antcomb_conf *antconf);
ops->spectral_scan_config = ar9003_hw_spectral_scan_config;
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -703,7 +703,8 @@ static void ath9k_init_txpower_limits(st
+@@ -710,7 +710,8 @@ static void ath9k_init_txpower_limits(st
if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
ath9k_init_band_txpower(sc, IEEE80211_BAND_5GHZ);
}
static const struct ieee80211_iface_limit if_limits[] = {
-@@ -895,6 +896,18 @@ static void ath9k_set_hw_capab(struct at
+@@ -902,6 +903,18 @@ static void ath9k_set_hw_capab(struct at
SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
}
int ath9k_init_device(u16 devid, struct ath_softc *sc,
const struct ath_bus_ops *bus_ops)
{
-@@ -940,6 +953,8 @@ int ath9k_init_device(u16 devid, struct
+@@ -947,6 +960,8 @@ int ath9k_init_device(u16 devid, struct
ARRAY_SIZE(ath9k_tpt_blink));
#endif
static inline void ath9k_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable)
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-@@ -1316,9 +1316,30 @@ void ar5008_hw_init_rate_txpower(struct
+@@ -1327,9 +1327,30 @@ void ar5008_hw_init_rate_txpower(struct
}
}
static const u32 ar5416_cca_regs[6] = {
AR_PHY_CCA,
AR_PHY_CH1_CCA,
-@@ -1333,6 +1354,8 @@ int ar5008_hw_attach_phy_ops(struct ath_
+@@ -1344,6 +1365,8 @@ int ar5008_hw_attach_phy_ops(struct ath_
if (ret)
return ret;
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -245,6 +245,19 @@ void ath9k_hw_get_channel_centers(struct
+@@ -246,6 +246,19 @@ void ath9k_hw_get_channel_centers(struct
centers->synth_center + (extoff * HT40_CHANNEL_CENTER_SHIFT);
}
/******************/
/* Chip Revisions */
/******************/
-@@ -1382,6 +1395,9 @@ static bool ath9k_hw_set_reset(struct at
+@@ -1386,6 +1399,9 @@ static bool ath9k_hw_set_reset(struct at
if (AR_SREV_9100(ah))
udelay(50);
return true;
}
-@@ -1481,6 +1497,9 @@ static bool ath9k_hw_chip_reset(struct a
+@@ -1485,6 +1501,9 @@ static bool ath9k_hw_chip_reset(struct a
ar9003_hw_internal_regulator_apply(ah);
ath9k_hw_init_pll(ah, chan);
return true;
}
-@@ -1782,8 +1801,14 @@ static int ath9k_hw_do_fastcc(struct ath
+@@ -1786,8 +1805,14 @@ static int ath9k_hw_do_fastcc(struct ath
if (AR_SREV_9271(ah))
ar9002_hw_load_ani_reg(ah, chan);
return -EINVAL;
}
-@@ -2037,6 +2062,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -2041,6 +2066,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
ath9k_hw_set_radar_params(ah);
}
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-@@ -945,55 +945,6 @@ static bool ar5008_hw_ani_control_new(st
+@@ -956,55 +956,6 @@ static bool ar5008_hw_ani_control_new(st
* on == 0 means more noise imm
*/
u32 on = param ? 1 : 0;
drivers/net/wireless/rt2x00/rt2800lib.h | 11 +++++++++++
2 files changed, 11 insertions(+), 13 deletions(-)
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
-@@ -2960,17 +2960,4 @@ enum rt2800_eeprom_word {
- */
- #define BCN_TBTT_OFFSET 64
-
--/*
-- * RT2800 driver data structure
-- */
--struct rt2800_drv_data {
-- u8 calibration_bw20;
-- u8 calibration_bw40;
-- u8 bbp25;
-- u8 bbp26;
-- u8 txmixer_gain_24g;
-- u8 txmixer_gain_5g;
-- unsigned int tbtt_tick;
--};
--
- #endif /* RT2800_H */
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -20,6 +20,17 @@
+@@ -20,6 +20,20 @@
#ifndef RT2800LIB_H
#define RT2800LIB_H
++#include "rt2800.h"
++
+/* RT2800 driver data structure */
+struct rt2800_drv_data {
+ u8 calibration_bw20;
+ u8 txmixer_gain_24g;
+ u8 txmixer_gain_5g;
+ unsigned int tbtt_tick;
++ DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
+};
+
struct rt2800_ops {
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7747,6 +7747,7 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -7721,6 +7721,7 @@ static int rt2800_probe_rt(struct rt2x00
int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
u32 reg;
-@@ -7754,6 +7755,9 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -7728,6 +7729,9 @@ int rt2800_probe_hw(struct rt2x00_dev *r
if (retval)
return retval;
*/
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -20,6 +20,10 @@
- #ifndef RT2800LIB_H
- #define RT2800LIB_H
+@@ -22,6 +22,10 @@
+
+ #include "rt2800.h"
+enum rt2800_flag {
+ RT2800_HAS_HIGH_SHARED_MEM,
/* RT2800 driver data structure */
struct rt2800_drv_data {
u8 calibration_bw20;
-@@ -29,6 +33,8 @@ struct rt2800_drv_data {
- u8 txmixer_gain_24g;
+@@ -32,6 +36,8 @@ struct rt2800_drv_data {
u8 txmixer_gain_5g;
unsigned int tbtt_tick;
+ DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
+
+ unsigned long rt2800_flags;
};
struct rt2800_ops {
-@@ -61,6 +67,13 @@ struct rt2800_ops {
+@@ -64,6 +70,13 @@ struct rt2800_ops {
__le32 *(*drv_get_txwi)(struct queue_entry *entry);
};
/*
* Update WCID information
-@@ -1437,8 +1467,11 @@ int rt2800_config_pairwise_key(struct rt
+@@ -1405,8 +1435,11 @@ int rt2800_config_pairwise_key(struct rt
sizeof(key_entry.rx_mic));
offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
}
/*
-@@ -4908,14 +4941,19 @@ static int rt2800_init_registers(struct
+@@ -4884,14 +4917,19 @@ static int rt2800_init_registers(struct
/*
* ASIC will keep garbage value after boot, clear encryption keys.
*/
}
/*
-@@ -5041,8 +5079,10 @@ static int rt2800_wait_bbp_ready(struct
+@@ -5017,8 +5055,10 @@ static int rt2800_wait_bbp_ready(struct
* BBP was enabled after firmware was loaded,
* but we need to reactivate it now.
*/
msleep(1);
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-@@ -6738,11 +6778,19 @@ int rt2800_enable_radio(struct rt2x00_de
+@@ -6714,11 +6754,19 @@ int rt2800_enable_radio(struct rt2x00_de
/*
* Send signal during boot time to initialize firmware.
*/
msleep(1);
/*
-@@ -7751,6 +7799,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -7725,6 +7773,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
int retval;
u32 reg;
retval = rt2800_probe_rt(rt2x00dev);
if (retval)
return retval;
-@@ -7830,8 +7880,11 @@ void rt2800_get_tkip_seq(struct ieee8021
- u32 offset;
+@@ -7808,8 +7858,11 @@ void rt2800_get_key_seq(struct ieee80211
+ return;
- offset = MAC_IVEIV_ENTRY(hw_key_idx);
+ offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
+
+ rt2800_shared_mem_lock(rt2x00dev);
rt2800_register_multiread(rt2x00dev, offset,
&iveiv_entry, sizeof(iveiv_entry));
+ rt2800_shared_mem_unlock(rt2x00dev);
- memcpy(iv16, &iveiv_entry.iv[0], sizeof(*iv16));
- memcpy(iv32, &iveiv_entry.iv[4], sizeof(*iv32));
+ memcpy(&seq->tkip.iv16, &iveiv_entry.iv[0], 2);
+ memcpy(&seq->tkip.iv32, &iveiv_entry.iv[4], 4);
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -35,6 +35,11 @@ struct rt2800_drv_data {
- unsigned int tbtt_tick;
+@@ -38,6 +38,11 @@ struct rt2800_drv_data {
+ DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
unsigned long rt2800_flags;
+
};
struct rt2800_ops {
-@@ -65,6 +70,10 @@ struct rt2800_ops {
+@@ -68,6 +73,10 @@ struct rt2800_ops {
const u8 *data, const size_t len);
int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev);
__le32 *(*drv_get_txwi)(struct queue_entry *entry);
};
static inline bool rt2800_has_high_shared_mem(struct rt2x00_dev *rt2x00dev)
-@@ -74,6 +83,29 @@ static inline bool rt2800_has_high_share
+@@ -77,6 +86,29 @@ static inline bool rt2800_has_high_share
return test_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
}
/*
* Queue handlers.
*/
-@@ -294,8 +315,10 @@ static int rt2800usb_write_firmware(stru
+@@ -299,8 +320,10 @@ static int rt2800usb_write_firmware(stru
data + offset, length);
}
/*
* Send firmware request to device to load firmware,
-@@ -310,7 +333,10 @@ static int rt2800usb_write_firmware(stru
+@@ -315,7 +338,10 @@ static int rt2800usb_write_firmware(stru
}
msleep(10);
return 0;
}
-@@ -328,8 +354,10 @@ static int rt2800usb_init_registers(stru
+@@ -333,8 +359,10 @@ static int rt2800usb_init_registers(stru
if (rt2800_wait_csr_ready(rt2x00dev))
return -EBUSY;
reg = 0;
rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1);
-@@ -859,6 +887,9 @@ static const struct rt2800_ops rt2800usb
+@@ -863,6 +891,9 @@ static const struct rt2800_ops rt2800usb
.drv_write_firmware = rt2800usb_write_firmware,
.drv_init_registers = rt2800usb_init_registers,
.drv_get_txwi = rt2800usb_get_txwi,
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4638,6 +4638,7 @@ EXPORT_SYMBOL_GPL(rt2800_link_tuner);
+@@ -4614,6 +4614,7 @@ EXPORT_SYMBOL_GPL(rt2800_link_tuner);
*/
static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
u16 eeprom;
unsigned int i;
-@@ -5003,7 +5004,7 @@ static int rt2800_init_registers(struct
+@@ -4979,7 +4980,7 @@ static int rt2800_init_registers(struct
/*
* Clear all beacons
*/
rt2800_clear_beacon_register(rt2x00dev, i);
if (rt2x00_is_usb(rt2x00dev)) {
-@@ -7852,6 +7853,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -7826,6 +7827,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
if (rt2x00_rt(rt2x00dev, RT3593))
__set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
*/
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -33,6 +33,7 @@ struct rt2800_drv_data {
+@@ -35,6 +35,7 @@ struct rt2800_drv_data {
u8 txmixer_gain_24g;
u8 txmixer_gain_5g;
unsigned int tbtt_tick;
+ unsigned int hw_beacon_count;
+ DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
unsigned long rt2800_flags;
-
*/
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4650,6 +4650,30 @@ static int rt2800_init_registers(struct
+@@ -4626,6 +4626,30 @@ static int rt2800_init_registers(struct
if (ret)
return ret;
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7877,7 +7877,10 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -7851,7 +7851,10 @@ int rt2800_probe_hw(struct rt2x00_dev *r
if (rt2x00_rt(rt2x00dev, RT3593))
__set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7847,6 +7847,7 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -7821,6 +7821,7 @@ static int rt2800_probe_rt(struct rt2x00
case RT3390:
case RT3572:
case RT3593:
#define RF5370 0x5370
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7465,6 +7465,66 @@ static const struct rf_channel rf_vals_3
+@@ -7441,6 +7441,66 @@ static const struct rf_channel rf_vals_3
{173, 0x61, 0, 9},
};
static const struct rf_channel rf_vals_5592_xtal20[] = {
/* Channel, N, K, mod, R */
{1, 482, 4, 10, 3},
-@@ -7694,6 +7754,11 @@ static int rt2800_probe_hw_mode(struct r
+@@ -7668,6 +7728,11 @@ static int rt2800_probe_hw_mode(struct r
spec->channels = rf_vals_3x;
break;
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4402,6 +4402,7 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -4378,6 +4378,7 @@ void rt2800_vco_calibration(struct rt2x0
case RF3053:
case RF3070:
case RF3290:
case RF5360:
case RF5362:
case RF5370:
-@@ -7873,6 +7874,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -7847,6 +7848,7 @@ static int rt2800_probe_hw_mode(struct r
case RF3053:
case RF3070:
case RF3290:
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -2649,6 +2649,211 @@ static void rt2800_config_channel_rf3053
+@@ -2625,6 +2625,211 @@ static void rt2800_config_channel_rf3053
}
}
#define POWER_BOUND 0x27
#define POWER_BOUND_5G 0x2b
-@@ -3261,6 +3466,9 @@ static void rt2800_config_channel(struct
+@@ -3237,6 +3442,9 @@ static void rt2800_config_channel(struct
case RF3322:
rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info);
break;
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7430,6 +7430,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7406,6 +7406,7 @@ static int rt2800_init_eeprom(struct rt2
case RF3290:
case RF3320:
case RF3322:
#define RX_FILTER_CFG 0x1400
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -5005,6 +5005,12 @@ static int rt2800_init_registers(struct
+@@ -4981,6 +4981,12 @@ static int rt2800_init_registers(struct
rt2800_register_write(rt2x00dev, TX_SW_CFG2,
0x00000000);
}
} else if (rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392) ||
rt2x00_rt(rt2x00dev, RT5592)) {
-@@ -5035,9 +5041,11 @@ static int rt2800_init_registers(struct
+@@ -5011,9 +5017,11 @@ static int rt2800_init_registers(struct
rt2800_register_read(rt2x00dev, MAX_LEN_CFG, ®);
rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2);
else
rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1);
-@@ -5190,6 +5198,11 @@ static int rt2800_init_registers(struct
+@@ -5166,6 +5174,11 @@ static int rt2800_init_registers(struct
reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002;
rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg);
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -5808,6 +5808,47 @@ static void rt2800_init_bbp_3593(struct
+@@ -5784,6 +5784,47 @@ static void rt2800_init_bbp_3593(struct
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
}
static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
{
int ant, div_mode;
-@@ -6026,6 +6067,9 @@ static void rt2800_init_bbp(struct rt2x0
+@@ -6002,6 +6043,9 @@ static void rt2800_init_bbp(struct rt2x0
case RT3593:
rt2800_init_bbp_3593(rt2x00dev);
return;
/*
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -6843,6 +6843,144 @@ static void rt2800_init_rfcsr_3593(struc
+@@ -6819,6 +6819,144 @@ static void rt2800_init_rfcsr_3593(struc
/* TODO: enable stream mode support */
}
static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
{
rt2800_rf_init_calibration(rt2x00dev, 2);
-@@ -7074,6 +7212,9 @@ static void rt2800_init_rfcsr(struct rt2
+@@ -7050,6 +7188,9 @@ static void rt2800_init_rfcsr(struct rt2
case RT3390:
rt2800_init_rfcsr_3390(rt2x00dev);
break;
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7611,6 +7611,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7587,6 +7587,8 @@ static int rt2800_init_eeprom(struct rt2
rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3429,6 +3429,36 @@ static char rt2800_txpower_to_dev(struct
+@@ -3405,6 +3405,36 @@ static char rt2800_txpower_to_dev(struct
return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
}
static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
struct ieee80211_conf *conf,
struct rf_channel *rf,
-@@ -3447,6 +3477,12 @@ static void rt2800_config_channel(struct
+@@ -3423,6 +3453,12 @@ static void rt2800_config_channel(struct
rt2800_txpower_to_dev(rt2x00dev, rf->channel,
info->default_power3);
switch (rt2x00dev->chip.rf) {
case RF2020:
case RF3020:
-@@ -3530,6 +3566,15 @@ static void rt2800_config_channel(struct
+@@ -3506,6 +3542,15 @@ static void rt2800_config_channel(struct
rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
rt2800_bbp_write(rt2x00dev, 77, 0x98);
} else {
rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-@@ -3542,6 +3587,7 @@ static void rt2800_config_channel(struct
+@@ -3518,6 +3563,7 @@ static void rt2800_config_channel(struct
!rt2x00_rt(rt2x00dev, RT5392)) {
if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
rt2800_bbp_write(rt2x00dev, 82, 0x62);
rt2800_bbp_write(rt2x00dev, 75, 0x46);
} else {
if (rt2x00_rt(rt2x00dev, RT3593))
-@@ -3550,19 +3596,22 @@ static void rt2800_config_channel(struct
+@@ -3526,19 +3572,22 @@ static void rt2800_config_channel(struct
rt2800_bbp_write(rt2x00dev, 82, 0x84);
rt2800_bbp_write(rt2x00dev, 75, 0x50);
}
rt2800_bbp_write(rt2x00dev, 83, 0x9a);
if (rt2x00_has_cap_external_lna_a(rt2x00dev))
-@@ -3684,6 +3733,23 @@ static void rt2800_config_channel(struct
+@@ -3660,6 +3709,23 @@ static void rt2800_config_channel(struct
rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3416,13 +3416,15 @@ static char rt2800_txpower_to_dev(struct
+@@ -3392,13 +3392,15 @@ static char rt2800_txpower_to_dev(struct
unsigned int channel,
char txpower)
{
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4635,7 +4635,8 @@ static void rt2800_config_txpower(struct
+@@ -4611,7 +4611,8 @@ static void rt2800_config_txpower(struct
struct ieee80211_channel *chan,
int power_level)
{
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7493,7 +7493,8 @@ static u8 rt2800_get_txmixer_gain_24g(st
+@@ -7469,7 +7469,8 @@ static u8 rt2800_get_txmixer_gain_24g(st
{
u16 word;
return 0;
rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &word);
-@@ -7507,7 +7508,8 @@ static u8 rt2800_get_txmixer_gain_5g(str
+@@ -7483,7 +7484,8 @@ static u8 rt2800_get_txmixer_gain_5g(str
{
u16 word;
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -8428,7 +8428,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -8402,7 +8402,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
if (rt2x00_rt(rt2x00dev, RT3593))
__set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -1961,7 +1961,8 @@ void rt2800_config_ant(struct rt2x00_dev
+@@ -1937,7 +1937,8 @@ void rt2800_config_ant(struct rt2x00_dev
rt2800_bbp_write(rt2x00dev, 3, r3);
rt2800_bbp_write(rt2x00dev, 1, r1);
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -1984,7 +1984,8 @@ static void rt2800_config_lna_gain(struc
+@@ -1960,7 +1960,8 @@ static void rt2800_config_lna_gain(struc
rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
} else if (libconf->rf.channel <= 128) {
rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom);
lna_gain = rt2x00_get_field16(eeprom,
EEPROM_EXT_LNA2_A1);
-@@ -1994,7 +1995,8 @@ static void rt2800_config_lna_gain(struc
+@@ -1970,7 +1971,8 @@ static void rt2800_config_lna_gain(struc
EEPROM_RSSI_BG2_LNA_A1);
}
} else {
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4835,7 +4835,8 @@ static u8 rt2800_get_default_vgc(struct
+@@ -4811,7 +4811,8 @@ static u8 rt2800_get_default_vgc(struct
else
vgc = 0x2e + rt2x00dev->lna_gain;
} else { /* 5GHZ band */
vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3;
else if (rt2x00_rt(rt2x00dev, RT5592))
vgc = 0x24 + (2 * rt2x00dev->lna_gain);
-@@ -4855,7 +4856,8 @@ static inline void rt2800_set_vgc(struct
+@@ -4831,7 +4832,8 @@ static inline void rt2800_set_vgc(struct
{
if (qual->vgc_level != vgc_level) {
if (rt2x00_rt(rt2x00dev, RT3572) ||
rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
vgc_level);
} else if (rt2x00_rt(rt2x00dev, RT5592)) {
-@@ -4902,6 +4904,11 @@ void rt2800_link_tuner(struct rt2x00_dev
+@@ -4878,6 +4880,11 @@ void rt2800_link_tuner(struct rt2x00_dev
}
break;
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7630,7 +7630,8 @@ static int rt2800_validate_eeprom(struct
+@@ -7606,7 +7606,8 @@ static int rt2800_validate_eeprom(struct
rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
-@@ -7650,7 +7651,8 @@ static int rt2800_validate_eeprom(struct
+@@ -7626,7 +7627,8 @@ static int rt2800_validate_eeprom(struct
rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
-@@ -7658,7 +7660,8 @@ static int rt2800_validate_eeprom(struct
+@@ -7634,7 +7636,8 @@ static int rt2800_validate_eeprom(struct
}
rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -4005,6 +4005,9 @@ static u8 rt2800_compensate_txpower(stru
+@@ -3981,6 +3981,9 @@ static u8 rt2800_compensate_txpower(stru
if (rt2x00_rt(rt2x00dev, RT3593))
return min_t(u8, txpower, 0xc);
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -8441,7 +8441,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -8415,7 +8415,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
if (retval)
return retval;
--- a/.local-symbols
+++ b/.local-symbols
-@@ -263,6 +263,7 @@ RT2X00_LIB_FIRMWARE=
+@@ -311,6 +311,7 @@ RT2X00_LIB_FIRMWARE=
RT2X00_LIB_CRYPTO=
RT2X00_LIB_LEDS=
RT2X00_LIB_DEBUGFS=
+RT2X00_LIB_EEPROM=
RT2X00_DEBUG=
- RTL_CARDS=
- RTL8192CE=
+ WL_MEDIATEK=
+ MT7601U=
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -69,6 +69,7 @@ config RT2800PCI
obj-$(CPTCFG_RT2X00_LIB_MMIO) += rt2x00mmio.o
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
-@@ -43,6 +43,8 @@ struct rt2800_drv_data {
+@@ -46,6 +46,8 @@ struct rt2800_drv_data {
} shmem_lock;
};
struct rt2800_ops {
void (*register_read)(struct rt2x00_dev *rt2x00dev,
const unsigned int offset, u32 *value);
-@@ -176,6 +178,15 @@ static inline int rt2800_read_eeprom(str
+@@ -179,6 +181,15 @@ static inline int rt2800_read_eeprom(str
{
const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
* Interrupt context handlers.
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
-@@ -2392,6 +2392,7 @@ static int rt61pci_validate_eeprom(struc
+@@ -2390,6 +2390,7 @@ static int rt61pci_validate_eeprom(struc
u32 reg;
u16 word;
u8 *mac;
s8 value;
rt2x00mmio_register_read(rt2x00dev, E2PROM_CSR, ®);
-@@ -2412,7 +2413,11 @@ static int rt61pci_validate_eeprom(struc
+@@ -2410,7 +2411,11 @@ static int rt61pci_validate_eeprom(struc
/*
* Start validation of the data that has been read.
*/
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3552,11 +3552,18 @@ static void rt2800_config_channel(struct
+@@ -3528,11 +3528,18 @@ static void rt2800_config_channel(struct
/*
* Change BBP settings
*/
} else if (rt2x00_rt(rt2x00dev, RT3593)) {
if (rf->channel > 14) {
/* Disable CCK Packet detection on 5GHz */
-@@ -6618,6 +6625,12 @@ static void rt2800_init_rfcsr_3290(struc
+@@ -6594,6 +6601,12 @@ static void rt2800_init_rfcsr_3290(struc
static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev)
{
rt2800_rf_init_calibration(rt2x00dev, 30);
rt2800_rfcsr_write(rt2x00dev, 0, 0xf0);
-@@ -6653,15 +6666,30 @@ static void rt2800_init_rfcsr_3352(struc
+@@ -6629,15 +6642,30 @@ static void rt2800_init_rfcsr_3352(struc
rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
rt2800_rfcsr_write(rt2x00dev, 43, 0xdb);
rt2800_rfcsr_write(rt2x00dev, 44, 0xdb);
rt2800_rfcsr_write(rt2x00dev, 45, 0xdb);
-@@ -6669,15 +6697,20 @@ static void rt2800_init_rfcsr_3352(struc
+@@ -6645,15 +6673,20 @@ static void rt2800_init_rfcsr_3352(struc
rt2800_rfcsr_write(rt2x00dev, 47, 0x0d);
rt2800_rfcsr_write(rt2x00dev, 48, 0x14);
rt2800_rfcsr_write(rt2x00dev, 49, 0x00);
rt2800_rfcsr_write(rt2x00dev, 59, 0x00);
rt2800_rfcsr_write(rt2x00dev, 60, 0x00);
rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
-@@ -7698,6 +7731,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7674,6 +7707,7 @@ static int rt2800_init_eeprom(struct rt2
* RT53xx: defined in "EEPROM_CHIP_ID" field
*/
if (rt2x00_rt(rt2x00dev, RT3290) ||
rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
-@@ -7793,7 +7827,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7769,7 +7803,8 @@ static int rt2800_init_eeprom(struct rt2
/*
* Detect if this device has Bluetooth co-existence.
*/
__set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags);
/*
-@@ -7822,6 +7857,22 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7798,6 +7833,22 @@ static int rt2800_init_eeprom(struct rt2
EIRP_MAX_TX_POWER_LIMIT)
__set_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags);
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -8209,6 +8209,27 @@ static const struct rf_channel rf_vals_5
+@@ -8185,6 +8185,27 @@ static const struct rf_channel rf_vals_5
{196, 83, 0, 12, 1},
};
static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
-@@ -8297,7 +8318,10 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8271,7 +8292,10 @@ static int rt2800_probe_hw_mode(struct r
case RF5390:
case RF5392:
spec->num_channels = 14;
break;
case RF3052:
-@@ -8481,6 +8505,19 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -8455,6 +8479,19 @@ static int rt2800_probe_rt(struct rt2x00
return 0;
}
int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
{
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
-@@ -8523,6 +8560,15 @@ int rt2800_probe_hw(struct rt2x00_dev *r
+@@ -8497,6 +8534,15 @@ int rt2800_probe_hw(struct rt2x00_dev *r
rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
/*
#include "rt2x00.h"
#include "rt2800lib.h"
-@@ -8507,13 +8508,14 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -8481,13 +8482,14 @@ static int rt2800_probe_rt(struct rt2x00
int rt2800_probe_clk(struct rt2x00_dev *rt2x00dev)
{
#define RF5370 0x5370
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3038,6 +3038,13 @@ static void rt2800_config_channel_rf53xx
+@@ -3014,6 +3014,13 @@ static void rt2800_config_channel_rf53xx
rt2800_rfcsr_write(rt2x00dev, 59,
r59_non_bt[idx]);
}
}
}
-@@ -3516,6 +3523,7 @@ static void rt2800_config_channel(struct
+@@ -3492,6 +3499,7 @@ static void rt2800_config_channel(struct
rt2800_config_channel_rf3853(rt2x00dev, conf, rf, info);
break;
case RF3070:
case RF5360:
case RF5362:
case RF5370:
-@@ -3534,6 +3542,7 @@ static void rt2800_config_channel(struct
+@@ -3510,6 +3518,7 @@ static void rt2800_config_channel(struct
if (rt2x00_rf(rt2x00dev, RF3070) ||
rt2x00_rf(rt2x00dev, RF3290) ||
rt2x00_rf(rt2x00dev, RF3322) ||
rt2x00_rf(rt2x00dev, RF5360) ||
rt2x00_rf(rt2x00dev, RF5362) ||
rt2x00_rf(rt2x00dev, RF5370) ||
-@@ -3812,7 +3821,8 @@ static void rt2800_config_channel(struct
+@@ -3788,7 +3797,8 @@ static void rt2800_config_channel(struct
/*
* Clear update flag
*/
rt2800_bbp_read(rt2x00dev, 49, &bbp);
rt2x00_set_field8(&bbp, BBP49_UPDATE_FLAG, 0);
rt2800_bbp_write(rt2x00dev, 49, bbp);
-@@ -4698,6 +4708,7 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -4674,6 +4684,7 @@ void rt2800_vco_calibration(struct rt2x0
case RF3070:
case RF3290:
case RF3853:
case RF5360:
case RF5362:
case RF5370:
-@@ -5111,6 +5122,8 @@ static int rt2800_init_registers(struct
+@@ -5087,6 +5098,8 @@ static int rt2800_init_registers(struct
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
} else {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
-@@ -5766,9 +5779,13 @@ static void rt2800_init_bbp_3352(struct
+@@ -5742,9 +5755,13 @@ static void rt2800_init_bbp_3352(struct
rt2800_bbp_write(rt2x00dev, 82, 0x62);
rt2800_bbp_write(rt2x00dev, 86, 0x38);
-@@ -5782,9 +5799,13 @@ static void rt2800_init_bbp_3352(struct
+@@ -5758,9 +5775,13 @@ static void rt2800_init_bbp_3352(struct
rt2800_bbp_write(rt2x00dev, 104, 0x92);
rt2800_bbp_write(rt2x00dev, 120, 0x50);
-@@ -5809,6 +5830,13 @@ static void rt2800_init_bbp_3352(struct
+@@ -5785,6 +5806,13 @@ static void rt2800_init_bbp_3352(struct
rt2800_bbp_write(rt2x00dev, 143, 0xa2);
rt2800_bbp_write(rt2x00dev, 148, 0xc8);
}
static void rt2800_init_bbp_3390(struct rt2x00_dev *rt2x00dev)
-@@ -6150,6 +6178,7 @@ static void rt2800_init_bbp(struct rt2x0
+@@ -6126,6 +6154,7 @@ static void rt2800_init_bbp(struct rt2x0
rt2800_init_bbp_3290(rt2x00dev);
break;
case RT3352:
rt2800_init_bbp_3352(rt2x00dev);
break;
case RT3390:
-@@ -7101,6 +7130,76 @@ static void rt2800_init_rfcsr_3883(struc
+@@ -7077,6 +7106,76 @@ static void rt2800_init_rfcsr_3883(struc
rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
}
static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
{
rt2800_rf_init_calibration(rt2x00dev, 2);
-@@ -7341,6 +7440,9 @@ static void rt2800_init_rfcsr(struct rt2
+@@ -7317,6 +7416,9 @@ static void rt2800_init_rfcsr(struct rt2
case RT3593:
rt2800_init_rfcsr_3593(rt2x00dev);
break;
case RT5390:
rt2800_init_rfcsr_5390(rt2x00dev);
break;
-@@ -7600,6 +7702,12 @@ static int rt2800_validate_eeprom(struct
+@@ -7576,6 +7678,12 @@ static int rt2800_validate_eeprom(struct
rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RF_TYPE, RF2820);
rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word);
} else if (rt2x00_rt(rt2x00dev, RT2860) ||
rt2x00_rt(rt2x00dev, RT2872)) {
/*
-@@ -7738,6 +7846,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7714,6 +7822,8 @@ static int rt2800_init_eeprom(struct rt2
rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
else if (rt2x00_rt(rt2x00dev, RT3883))
rf = RF3853;
else
rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
-@@ -7757,6 +7867,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7733,6 +7843,7 @@ static int rt2800_init_eeprom(struct rt2
case RF3320:
case RF3322:
case RF3853:
case RF5360:
case RF5362:
case RF5370:
-@@ -8312,6 +8423,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8286,6 +8397,7 @@ static int rt2800_probe_hw_mode(struct r
case RF3290:
case RF3320:
case RF3322:
case RF5360:
case RF5362:
case RF5370:
-@@ -8451,6 +8563,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8425,6 +8537,7 @@ static int rt2800_probe_hw_mode(struct r
case RF3070:
case RF3290:
case RF3853:
case RF5360:
case RF5362:
case RF5370:
-@@ -8491,6 +8604,7 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -8465,6 +8578,7 @@ static int rt2800_probe_rt(struct rt2x00
case RT3572:
case RT3593:
case RT3883:
#include "rt2x00.h"
#include "rt2800lib.h"
-@@ -7957,6 +7958,17 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7933,6 +7934,17 @@ static int rt2800_init_eeprom(struct rt2
rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -7841,10 +7841,11 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7817,10 +7817,11 @@ static int rt2800_init_eeprom(struct rt2
* RT53xx: defined in "EEPROM_CHIP_ID" field
*/
if (rt2x00_rt(rt2x00dev, RT3290) ||
* RFCSR 31:
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -3551,8 +3551,13 @@ static void rt2800_config_channel(struct
+@@ -3527,8 +3527,13 @@ static void rt2800_config_channel(struct
rt2x00_rf(rt2x00dev, RF5390) ||
rt2x00_rf(rt2x00dev, RF5392)) {
rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
-@@ -2084,6 +2084,8 @@ struct wireless_dev *lbs_cfg_alloc(struc
+@@ -2083,6 +2083,8 @@ struct wireless_dev *lbs_cfg_alloc(struc
goto err_wiphy_new;
}
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
-@@ -2174,6 +2174,8 @@ int lbs_cfg_register(struct lbs_private
+@@ -2173,6 +2173,8 @@ int lbs_cfg_register(struct lbs_private
wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
wdev->wiphy->reg_notifier = lbs_reg_notifier;
antenna = b43_antenna_to_phyctl(antenna);
ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
/* We can't send beacons with short preamble. Would get PHY errors. */
-@@ -3302,8 +3302,8 @@ static int b43_chip_init(struct b43_wlde
+@@ -3300,8 +3300,8 @@ static int b43_chip_init(struct b43_wlde
/* Select the antennae */
if (phy->ops->set_rx_antenna)
if (phy->type == B43_PHYTYPE_B) {
value16 = b43_read16(dev, 0x005E);
-@@ -4003,7 +4003,6 @@ static int b43_op_config(struct ieee8021
+@@ -4001,7 +4001,6 @@ static int b43_op_config(struct ieee8021
struct b43_wldev *dev = wl->current_dev;
struct b43_phy *phy = &dev->phy;
struct ieee80211_conf *conf = &hw->conf;
int err = 0;
mutex_lock(&wl->mutex);
-@@ -4046,11 +4045,9 @@ static int b43_op_config(struct ieee8021
+@@ -4044,11 +4043,9 @@ static int b43_op_config(struct ieee8021
}
/* Antennas for RX and management frame TX. */
if (wl->radio_enabled != phy->radio_on) {
if (wl->radio_enabled) {
-@@ -5213,6 +5210,47 @@ static int b43_op_get_survey(struct ieee
+@@ -5209,6 +5206,47 @@ static int b43_op_get_survey(struct ieee
return 0;
}
static const struct ieee80211_ops b43_hw_ops = {
.tx = b43_op_tx,
.conf_tx = b43_op_conf_tx,
-@@ -5234,6 +5272,8 @@ static const struct ieee80211_ops b43_hw
+@@ -5230,6 +5268,8 @@ static const struct ieee80211_ops b43_hw
.sw_scan_complete = b43_op_sw_scan_complete_notifier,
.get_survey = b43_op_get_survey,
.rfkill_poll = b43_rfkill_poll,
};
/* Hard-reset the chip. Do not call this directly.
-@@ -5542,6 +5582,8 @@ static int b43_one_core_attach(struct b4
+@@ -5538,6 +5578,8 @@ static int b43_one_core_attach(struct b4
if (!wldev)
goto out;
wldev->use_pio = b43_modparam_pio;
wldev->dev = dev;
wldev->wl = wl;
-@@ -5632,6 +5674,9 @@ static struct b43_wl *b43_wireless_init(
+@@ -5628,6 +5670,9 @@ static struct b43_wl *b43_wireless_init(
hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+++ /dev/null
-When running with DT, we no longer have a board file that can set up the
-platform data for wlcore. Allow this data to be passed from DT.
-
-Since some platforms use a gpio-irq, add support for passing either the
-irq number or the gpio number. For the latter case, the driver will
-request the gpio and convert it to the irq number. If an irq is
-specified, it'll be used as is.
-
-[Arik - the pdev_data pointer does not belong to us and is freed when
-the device is released. Dereference to our private data first.]
-
-Signed-off-by: Ido Yariv <ido@wizery.com>
-Signed-off-by: Arik Nemtsov <arik@wizery.com>
----
- drivers/net/wireless/ti/wlcore/sdio.c | 71 ++++++++++++++++++++++++++++++++---
- include/linux/wl12xx.h | 3 +-
- 2 files changed, 67 insertions(+), 7 deletions(-)
-
---- a/drivers/net/wireless/ti/wlcore/sdio.c
-+++ b/drivers/net/wireless/ti/wlcore/sdio.c
-@@ -34,6 +34,7 @@
- #include <linux/wl12xx.h>
- #include <linux/pm_runtime.h>
- #include <linux/printk.h>
-+#include <linux/of.h>
-
- #include "wlcore.h"
- #include "wl12xx_80211.h"
-@@ -214,6 +215,61 @@ static struct wl1271_if_operations sdio_
- .set_block_size = wl1271_sdio_set_block_size,
- };
-
-+static const struct of_device_id wlcore_of_match[] = {
-+ {
-+ .compatible = "wlcore",
-+ },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, wlcore_of_match);
-+
-+static struct wl12xx_platform_data *get_platform_data(struct device *dev)
-+{
-+ struct wl12xx_platform_data *pdata;
-+ struct device_node *np;
-+ u32 gpio;
-+
-+ pdata = wl12xx_get_platform_data();
-+ if (!IS_ERR(pdata))
-+ return kmemdup(pdata, sizeof(*pdata), GFP_KERNEL);
-+
-+ np = of_find_matching_node(NULL, wlcore_of_match);
-+ if (!np) {
-+ dev_err(dev, "No platform data set\n");
-+ return NULL;
-+ }
-+
-+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
-+ if (!pdata) {
-+ dev_err(dev, "Can't allocate platform data\n");
-+ return NULL;
-+ }
-+
-+ if (of_property_read_u32(np, "irq", &pdata->irq)) {
-+ if (!of_property_read_u32(np, "gpio", &gpio) &&
-+ !gpio_request_one(gpio, GPIOF_IN, "wlcore_irq")) {
-+ pdata->gpio = gpio;
-+ pdata->irq = gpio_to_irq(gpio);
-+ }
-+ }
-+
-+ /* Optional fields */
-+ pdata->use_eeprom = of_property_read_bool(np, "use-eeprom");
-+ of_property_read_u32(np, "board-ref-clock", &pdata->board_ref_clock);
-+ of_property_read_u32(np, "board-tcxo-clock", &pdata->board_tcxo_clock);
-+ of_property_read_u32(np, "platform-quirks", &pdata->platform_quirks);
-+
-+ return pdata;
-+}
-+
-+static void del_platform_data(struct wl12xx_platform_data *pdata)
-+{
-+ if (pdata->gpio)
-+ gpio_free(pdata->gpio);
-+
-+ kfree(pdata);
-+}
-+
- static int wl1271_probe(struct sdio_func *func,
- const struct sdio_device_id *id)
- {
-@@ -245,10 +301,10 @@ static int wl1271_probe(struct sdio_func
- /* Use block mode for transferring over one block size of data */
- func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
-
-- pdev_data.pdata = wl12xx_get_platform_data();
-- if (IS_ERR(pdev_data.pdata)) {
-- ret = PTR_ERR(pdev_data.pdata);
-- dev_err(glue->dev, "missing wlan platform data: %d\n", ret);
-+ pdev_data.pdata = get_platform_data(&func->dev);
-+ if (!pdev_data.pdata) {
-+ ret = -EINVAL;
-+ dev_err(glue->dev, "missing wlan platform data\n");
- goto out_free_glue;
- }
-
-@@ -279,7 +335,7 @@ static int wl1271_probe(struct sdio_func
- if (!glue->core) {
- dev_err(glue->dev, "can't allocate platform_device");
- ret = -ENOMEM;
-- goto out_free_glue;
-+ goto out_free_pdata;
- }
-
- glue->core->dev.parent = &func->dev;
-@@ -313,6 +369,9 @@ static int wl1271_probe(struct sdio_func
- out_dev_put:
- platform_device_put(glue->core);
-
-+out_free_pdata:
-+ del_platform_data(pdev_data->pdata);
-+
- out_free_glue:
- kfree(glue);
-
-@@ -323,11 +382,14 @@ out:
- static void wl1271_remove(struct sdio_func *func)
- {
- struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
-+ struct wlcore_platdev_data *pdev_data = glue->core->dev.platform_data;
-+ struct wl12xx_platform_data *pdata = pdev_data->pdata;
-
- /* Undo decrement done above in wl1271_probe */
- pm_runtime_get_noresume(&func->dev);
-
- platform_device_unregister(glue->core);
-+ del_platform_data(pdata);
- kfree(glue);
- }
-
case RT5592:
*txwi_size = TXWI_DESC_SIZE_5WORDS;
*rxwi_size = RXWI_DESC_SIZE_6WORDS;
-@@ -3326,6 +3399,312 @@ static void rt2800_config_channel_rf55xx
+@@ -3302,6 +3375,312 @@ static void rt2800_config_channel_rf55xx
rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F);
}
static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev,
const unsigned int word,
const u8 value)
-@@ -3482,7 +3861,7 @@ static void rt2800_config_channel(struct
+@@ -3458,7 +3837,7 @@ static void rt2800_config_channel(struct
struct channel_info *info)
{
u32 reg;
u8 bbp, rfcsr;
info->default_power1 = rt2800_txpower_to_dev(rt2x00dev, rf->channel,
-@@ -3536,6 +3915,9 @@ static void rt2800_config_channel(struct
+@@ -3512,6 +3891,9 @@ static void rt2800_config_channel(struct
case RF5592:
rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info);
break;
default:
rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
}
-@@ -3638,7 +4020,7 @@ static void rt2800_config_channel(struct
+@@ -3614,7 +3996,7 @@ static void rt2800_config_channel(struct
else if (rt2x00_rt(rt2x00dev, RT3593) ||
rt2x00_rt(rt2x00dev, RT3883))
rt2800_bbp_write(rt2x00dev, 82, 0x82);
rt2800_bbp_write(rt2x00dev, 82, 0xf2);
if (rt2x00_rt(rt2x00dev, RT3593) ||
-@@ -3660,7 +4042,7 @@ static void rt2800_config_channel(struct
+@@ -3636,7 +4018,7 @@ static void rt2800_config_channel(struct
if (rt2x00_rt(rt2x00dev, RT3572))
rt2800_rfcsr_write(rt2x00dev, 8, 0);
switch (rt2x00dev->default_ant.tx_chain_num) {
case 3:
-@@ -3709,6 +4091,7 @@ static void rt2800_config_channel(struct
+@@ -3685,6 +4067,7 @@ static void rt2800_config_channel(struct
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-@@ -4725,6 +5108,14 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -4701,6 +5084,14 @@ void rt2800_vco_calibration(struct rt2x0
rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
break;
default:
return;
}
-@@ -5125,9 +5516,42 @@ static int rt2800_init_registers(struct
+@@ -5101,9 +5492,42 @@ static int rt2800_init_registers(struct
} else if (rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392) ||
rt2x00_rt(rt2x00dev, RT5592)) {
} else if (rt2x00_rt(rt2x00dev, RT5350)) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
} else {
-@@ -6159,6 +6583,225 @@ static void rt2800_init_bbp_5592(struct
+@@ -6135,6 +6559,225 @@ static void rt2800_init_bbp_5592(struct
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
}
static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
{
unsigned int i;
-@@ -6201,7 +6844,10 @@ static void rt2800_init_bbp(struct rt2x0
+@@ -6177,7 +6820,10 @@ static void rt2800_init_bbp(struct rt2x0
return;
case RT5390:
case RT5392:
break;
case RT5592:
rt2800_init_bbp_5592(rt2x00dev);
-@@ -7415,6 +8061,295 @@ static void rt2800_init_rfcsr_5592(struc
+@@ -7391,6 +8037,295 @@ static void rt2800_init_rfcsr_5592(struc
rt2800_led_open_drain_enable(rt2x00dev);
}
static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
{
if (rt2800_is_305x_soc(rt2x00dev)) {
-@@ -7450,7 +8385,10 @@ static void rt2800_init_rfcsr(struct rt2
+@@ -7426,7 +8361,10 @@ static void rt2800_init_rfcsr(struct rt2
rt2800_init_rfcsr_5350(rt2x00dev);
break;
case RT5390:
break;
case RT5392:
rt2800_init_rfcsr_5392(rt2x00dev);
-@@ -7882,6 +8820,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7858,6 +8796,7 @@ static int rt2800_init_eeprom(struct rt2
case RF5390:
case RF5392:
case RF5592:
break;
default:
rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n",
-@@ -8448,6 +9387,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8422,6 +9361,7 @@ static int rt2800_probe_hw_mode(struct r
case RF5372:
case RF5390:
case RF5392:
spec->num_channels = 14;
if (spec->clk_is_20mhz)
spec->channels = rf_vals_xtal20mhz_3x;
-@@ -8588,6 +9528,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8562,6 +9502,7 @@ static int rt2800_probe_hw_mode(struct r
case RF5372:
case RF5390:
case RF5392:
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -387,9 +387,14 @@ static int ath10k_download_and_run_otp(s
-
- ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result);
-
-- if (!skip_otp && result != 0) {
+@@ -391,8 +391,13 @@ static int ath10k_download_and_run_otp(s
+ if (!(skip_otp || test_bit(ATH10K_FW_FEATURE_IGNORE_OTP_RESULT,
+ ar->fw_features))
+ && result != 0) {
- ath10k_err(ar, "otp calibration failed: %d", result);
- return -EINVAL;
-+ if (!skip_otp) {
+ if (result == 2) {
+ ath10k_warn(ar, "otp stream is empty, using board.bin contents");
+ return 0;
-+ } else if (result != 0) {
++ } else {
+ ath10k_err(ar, "otp calibration failed: %d", result);
+ return -EINVAL;
+ }
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -1323,6 +1323,16 @@ int ath10k_core_register(struct ath10k *
+@@ -1422,6 +1422,16 @@ int ath10k_core_register(struct ath10k *
ar->chip_id = chip_id;
queue_work(ar->workqueue, &ar->register_work);
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -5416,6 +5416,21 @@ struct ath10k_vif *ath10k_get_arvif(stru
+@@ -6756,6 +6756,21 @@ struct ath10k_vif *ath10k_get_arvif(stru
return arvif_iter.arvif;
}
int ath10k_mac_register(struct ath10k *ar)
{
static const u32 cipher_suites[] = {
-@@ -5590,6 +5605,12 @@ int ath10k_mac_register(struct ath10k *a
+@@ -6971,6 +6986,12 @@ int ath10k_mac_register(struct ath10k *a
ar->hw->wiphy->cipher_suites = cipher_suites;
ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
+++ /dev/null
-diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
-index 02da72e..f3788e2 100644
---- a/drivers/net/wireless/ath/ath10k/core.c
-+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -675,6 +675,17 @@ static int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name)
- ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie wmi op version %d\n",
- ar->wmi.op_version);
- break;
-+ case ATH10K_FW_IE_HTT_OP_VERSION:
-+ if (ie_len != sizeof(u32))
-+ break;
-+
-+ version = (__le32 *)data;
-+
-+ ar->htt.op_version = le32_to_cpup(version);
-+
-+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie htt op version %d\n",
-+ ar->htt.op_version);
-+ break;
- default:
- ath10k_warn(ar, "Unknown FW IE: %u\n",
- le32_to_cpu(hdr->id));
-diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c
-index 4f59ab9..f782d76 100644
---- a/drivers/net/wireless/ath/ath10k/htt.c
-+++ b/drivers/net/wireless/ath/ath10k/htt.c
-@@ -22,6 +22,86 @@
- #include "core.h"
- #include "debug.h"
-
-+static const enum htt_t2h_msg_type htt_main_t2h_msg_types[] = {
-+ [HTT_MAIN_T2H_MSG_TYPE_VERSION_CONF] = HTT_T2H_MSG_TYPE_VERSION_CONF,
-+ [HTT_MAIN_T2H_MSG_TYPE_RX_IND] = HTT_T2H_MSG_TYPE_RX_IND,
-+ [HTT_MAIN_T2H_MSG_TYPE_RX_FLUSH] = HTT_T2H_MSG_TYPE_RX_FLUSH,
-+ [HTT_MAIN_T2H_MSG_TYPE_PEER_MAP] = HTT_T2H_MSG_TYPE_PEER_MAP,
-+ [HTT_MAIN_T2H_MSG_TYPE_PEER_UNMAP] = HTT_T2H_MSG_TYPE_PEER_UNMAP,
-+ [HTT_MAIN_T2H_MSG_TYPE_RX_ADDBA] = HTT_T2H_MSG_TYPE_RX_ADDBA,
-+ [HTT_MAIN_T2H_MSG_TYPE_RX_DELBA] = HTT_T2H_MSG_TYPE_RX_DELBA,
-+ [HTT_MAIN_T2H_MSG_TYPE_TX_COMPL_IND] = HTT_T2H_MSG_TYPE_TX_COMPL_IND,
-+ [HTT_MAIN_T2H_MSG_TYPE_PKTLOG] = HTT_T2H_MSG_TYPE_PKTLOG,
-+ [HTT_MAIN_T2H_MSG_TYPE_STATS_CONF] = HTT_T2H_MSG_TYPE_STATS_CONF,
-+ [HTT_MAIN_T2H_MSG_TYPE_RX_FRAG_IND] = HTT_T2H_MSG_TYPE_RX_FRAG_IND,
-+ [HTT_MAIN_T2H_MSG_TYPE_SEC_IND] = HTT_T2H_MSG_TYPE_SEC_IND,
-+ [HTT_MAIN_T2H_MSG_TYPE_TX_INSPECT_IND] =
-+ HTT_T2H_MSG_TYPE_TX_INSPECT_IND,
-+ [HTT_MAIN_T2H_MSG_TYPE_MGMT_TX_COMPL_IND] =
-+ HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION,
-+ [HTT_MAIN_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND] =
-+ HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND,
-+ [HTT_MAIN_T2H_MSG_TYPE_RX_PN_IND] = HTT_T2H_MSG_TYPE_RX_PN_IND,
-+ [HTT_MAIN_T2H_MSG_TYPE_RX_OFFLOAD_DELIVER_IND] =
-+ HTT_T2H_MSG_TYPE_RX_OFFLOAD_DELIVER_IND,
-+ [HTT_MAIN_T2H_MSG_TYPE_TEST] = HTT_T2H_MSG_TYPE_TEST,
-+};
-+
-+static const enum htt_t2h_msg_type htt_10x_t2h_msg_types[] = {
-+ [HTT_10X_T2H_MSG_TYPE_VERSION_CONF] = HTT_T2H_MSG_TYPE_VERSION_CONF,
-+ [HTT_10X_T2H_MSG_TYPE_RX_IND] = HTT_T2H_MSG_TYPE_RX_IND,
-+ [HTT_10X_T2H_MSG_TYPE_RX_FLUSH] = HTT_T2H_MSG_TYPE_RX_FLUSH,
-+ [HTT_10X_T2H_MSG_TYPE_PEER_MAP] = HTT_T2H_MSG_TYPE_PEER_MAP,
-+ [HTT_10X_T2H_MSG_TYPE_PEER_UNMAP] = HTT_T2H_MSG_TYPE_PEER_UNMAP,
-+ [HTT_10X_T2H_MSG_TYPE_RX_ADDBA] = HTT_T2H_MSG_TYPE_RX_ADDBA,
-+ [HTT_10X_T2H_MSG_TYPE_RX_DELBA] = HTT_T2H_MSG_TYPE_RX_DELBA,
-+ [HTT_10X_T2H_MSG_TYPE_TX_COMPL_IND] = HTT_T2H_MSG_TYPE_TX_COMPL_IND,
-+ [HTT_10X_T2H_MSG_TYPE_PKTLOG] = HTT_T2H_MSG_TYPE_PKTLOG,
-+ [HTT_10X_T2H_MSG_TYPE_STATS_CONF] = HTT_T2H_MSG_TYPE_STATS_CONF,
-+ [HTT_10X_T2H_MSG_TYPE_RX_FRAG_IND] = HTT_T2H_MSG_TYPE_RX_FRAG_IND,
-+ [HTT_10X_T2H_MSG_TYPE_SEC_IND] = HTT_T2H_MSG_TYPE_SEC_IND,
-+ [HTT_10X_T2H_MSG_TYPE_RC_UPDATE_IND] = HTT_T2H_MSG_TYPE_RC_UPDATE_IND,
-+ [HTT_10X_T2H_MSG_TYPE_TX_INSPECT_IND] = HTT_T2H_MSG_TYPE_TX_INSPECT_IND,
-+ [HTT_10X_T2H_MSG_TYPE_TEST] = HTT_T2H_MSG_TYPE_TEST,
-+ [HTT_10X_T2H_MSG_TYPE_CHAN_CHANGE] = HTT_T2H_MSG_TYPE_CHAN_CHANGE,
-+ [HTT_10X_T2H_MSG_TYPE_AGGR_CONF] = HTT_T2H_MSG_TYPE_AGGR_CONF,
-+ [HTT_10X_T2H_MSG_TYPE_STATS_NOUPLOAD] = HTT_T2H_MSG_TYPE_STATS_NOUPLOAD,
-+ [HTT_10X_T2H_MSG_TYPE_MGMT_TX_COMPL_IND] =
-+ HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION,
-+};
-+
-+static const enum htt_t2h_msg_type htt_tlv_t2h_msg_types[] = {
-+ [HTT_TLV_T2H_MSG_TYPE_VERSION_CONF] = HTT_T2H_MSG_TYPE_VERSION_CONF,
-+ [HTT_TLV_T2H_MSG_TYPE_RX_IND] = HTT_T2H_MSG_TYPE_RX_IND,
-+ [HTT_TLV_T2H_MSG_TYPE_RX_FLUSH] = HTT_T2H_MSG_TYPE_RX_FLUSH,
-+ [HTT_TLV_T2H_MSG_TYPE_PEER_MAP] = HTT_T2H_MSG_TYPE_PEER_MAP,
-+ [HTT_TLV_T2H_MSG_TYPE_PEER_UNMAP] = HTT_T2H_MSG_TYPE_PEER_UNMAP,
-+ [HTT_TLV_T2H_MSG_TYPE_RX_ADDBA] = HTT_T2H_MSG_TYPE_RX_ADDBA,
-+ [HTT_TLV_T2H_MSG_TYPE_RX_DELBA] = HTT_T2H_MSG_TYPE_RX_DELBA,
-+ [HTT_TLV_T2H_MSG_TYPE_TX_COMPL_IND] = HTT_T2H_MSG_TYPE_TX_COMPL_IND,
-+ [HTT_TLV_T2H_MSG_TYPE_PKTLOG] = HTT_T2H_MSG_TYPE_PKTLOG,
-+ [HTT_TLV_T2H_MSG_TYPE_STATS_CONF] = HTT_T2H_MSG_TYPE_STATS_CONF,
-+ [HTT_TLV_T2H_MSG_TYPE_RX_FRAG_IND] = HTT_T2H_MSG_TYPE_RX_FRAG_IND,
-+ [HTT_TLV_T2H_MSG_TYPE_SEC_IND] = HTT_T2H_MSG_TYPE_SEC_IND,
-+ [HTT_TLV_T2H_MSG_TYPE_RC_UPDATE_IND] = HTT_T2H_MSG_TYPE_RC_UPDATE_IND,
-+ [HTT_TLV_T2H_MSG_TYPE_TX_INSPECT_IND] = HTT_T2H_MSG_TYPE_TX_INSPECT_IND,
-+ [HTT_TLV_T2H_MSG_TYPE_MGMT_TX_COMPL_IND] =
-+ HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION,
-+ [HTT_TLV_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND] =
-+ HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND,
-+ [HTT_TLV_T2H_MSG_TYPE_RX_PN_IND] = HTT_T2H_MSG_TYPE_RX_PN_IND,
-+ [HTT_TLV_T2H_MSG_TYPE_RX_OFFLOAD_DELIVER_IND] =
-+ HTT_T2H_MSG_TYPE_RX_OFFLOAD_DELIVER_IND,
-+ [HTT_TLV_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND] =
-+ HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND,
-+ [HTT_TLV_T2H_MSG_TYPE_WDI_IPA_OP_RESPONSE] =
-+ HTT_T2H_MSG_TYPE_WDI_IPA_OP_RESPONSE,
-+ [HTT_TLV_T2H_MSG_TYPE_CHAN_CHANGE] = HTT_T2H_MSG_TYPE_CHAN_CHANGE,
-+ [HTT_TLV_T2H_MSG_TYPE_RX_OFLD_PKT_ERR] =
-+ HTT_T2H_MSG_TYPE_RX_OFLD_PKT_ERR,
-+ [HTT_TLV_T2H_MSG_TYPE_TEST] = HTT_T2H_MSG_TYPE_TEST,
-+};
-+
- int ath10k_htt_connect(struct ath10k_htt *htt)
- {
- struct ath10k_htc_svc_conn_req conn_req;
-@@ -66,6 +146,24 @@ int ath10k_htt_init(struct ath10k *ar)
- 8 + /* llc snap */
- 2; /* ip4 dscp or ip6 priority */
-
-+ switch (ar->htt.op_version) {
-+ case ATH10K_FW_HTT_OP_VERSION_10_1:
-+ ar->htt.t2h_msg_types = htt_10x_t2h_msg_types;
-+ ar->htt.t2h_msg_types_max = HTT_10X_T2H_NUM_MSGS;
-+ break;
-+ case ATH10K_FW_HTT_OP_VERSION_TLV:
-+ ar->htt.t2h_msg_types = htt_tlv_t2h_msg_types;
-+ ar->htt.t2h_msg_types_max = HTT_TLV_T2H_NUM_MSGS;
-+ break;
-+ case ATH10K_FW_HTT_OP_VERSION_MAIN:
-+ case ATH10K_FW_HTT_OP_VERSION_UNSET:
-+ ar->htt.t2h_msg_types = htt_main_t2h_msg_types;
-+ ar->htt.t2h_msg_types_max = HTT_MAIN_T2H_NUM_MSGS;
-+ break;
-+ case ATH10K_FW_HTT_OP_VERSION_MAX:
-+ WARN_ON(1);
-+ return -EINVAL;
-+ }
- return 0;
- }
-
-diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
-index 874bf44..95df742 100644
---- a/drivers/net/wireless/ath/ath10k/htt.h
-+++ b/drivers/net/wireless/ath/ath10k/htt.h
-@@ -26,6 +26,7 @@
-
- #include "htc.h"
- #include "rx_desc.h"
-+#include "hw.h"
-
- enum htt_dbg_stats_type {
- HTT_DBG_STATS_WAL_PDEV_TXRX = 1 << 0,
-@@ -271,35 +272,108 @@ enum htt_mgmt_tx_status {
-
- /*=== target -> host messages ===============================================*/
-
--enum htt_t2h_msg_type {
-- HTT_T2H_MSG_TYPE_VERSION_CONF = 0x0,
-- HTT_T2H_MSG_TYPE_RX_IND = 0x1,
-- HTT_T2H_MSG_TYPE_RX_FLUSH = 0x2,
-- HTT_T2H_MSG_TYPE_PEER_MAP = 0x3,
-- HTT_T2H_MSG_TYPE_PEER_UNMAP = 0x4,
-- HTT_T2H_MSG_TYPE_RX_ADDBA = 0x5,
-- HTT_T2H_MSG_TYPE_RX_DELBA = 0x6,
-- HTT_T2H_MSG_TYPE_TX_COMPL_IND = 0x7,
-- HTT_T2H_MSG_TYPE_PKTLOG = 0x8,
-- HTT_T2H_MSG_TYPE_STATS_CONF = 0x9,
-- HTT_T2H_MSG_TYPE_RX_FRAG_IND = 0xa,
-- HTT_T2H_MSG_TYPE_SEC_IND = 0xb,
-- HTT_T2H_MSG_TYPE_RC_UPDATE_IND = 0xc,
-- HTT_T2H_MSG_TYPE_TX_INSPECT_IND = 0xd,
-- HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION = 0xe,
-- HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND = 0xf,
-- HTT_T2H_MSG_TYPE_RX_PN_IND = 0x10,
-- HTT_T2H_MSG_TYPE_RX_OFFLOAD_DELIVER_IND = 0x11,
-- HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND = 0x12,
-+enum htt_main_t2h_msg_type {
-+ HTT_MAIN_T2H_MSG_TYPE_VERSION_CONF = 0x0,
-+ HTT_MAIN_T2H_MSG_TYPE_RX_IND = 0x1,
-+ HTT_MAIN_T2H_MSG_TYPE_RX_FLUSH = 0x2,
-+ HTT_MAIN_T2H_MSG_TYPE_PEER_MAP = 0x3,
-+ HTT_MAIN_T2H_MSG_TYPE_PEER_UNMAP = 0x4,
-+ HTT_MAIN_T2H_MSG_TYPE_RX_ADDBA = 0x5,
-+ HTT_MAIN_T2H_MSG_TYPE_RX_DELBA = 0x6,
-+ HTT_MAIN_T2H_MSG_TYPE_TX_COMPL_IND = 0x7,
-+ HTT_MAIN_T2H_MSG_TYPE_PKTLOG = 0x8,
-+ HTT_MAIN_T2H_MSG_TYPE_STATS_CONF = 0x9,
-+ HTT_MAIN_T2H_MSG_TYPE_RX_FRAG_IND = 0xa,
-+ HTT_MAIN_T2H_MSG_TYPE_SEC_IND = 0xb,
-+ HTT_MAIN_T2H_MSG_TYPE_TX_INSPECT_IND = 0xd,
-+ HTT_MAIN_T2H_MSG_TYPE_MGMT_TX_COMPL_IND = 0xe,
-+ HTT_MAIN_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND = 0xf,
-+ HTT_MAIN_T2H_MSG_TYPE_RX_PN_IND = 0x10,
-+ HTT_MAIN_T2H_MSG_TYPE_RX_OFFLOAD_DELIVER_IND = 0x11,
-+ HTT_MAIN_T2H_MSG_TYPE_TEST,
-+ /* keep this last */
-+ HTT_MAIN_T2H_NUM_MSGS
-+};
-+
-+enum htt_10x_t2h_msg_type {
-+ HTT_10X_T2H_MSG_TYPE_VERSION_CONF = 0x0,
-+ HTT_10X_T2H_MSG_TYPE_RX_IND = 0x1,
-+ HTT_10X_T2H_MSG_TYPE_RX_FLUSH = 0x2,
-+ HTT_10X_T2H_MSG_TYPE_PEER_MAP = 0x3,
-+ HTT_10X_T2H_MSG_TYPE_PEER_UNMAP = 0x4,
-+ HTT_10X_T2H_MSG_TYPE_RX_ADDBA = 0x5,
-+ HTT_10X_T2H_MSG_TYPE_RX_DELBA = 0x6,
-+ HTT_10X_T2H_MSG_TYPE_TX_COMPL_IND = 0x7,
-+ HTT_10X_T2H_MSG_TYPE_PKTLOG = 0x8,
-+ HTT_10X_T2H_MSG_TYPE_STATS_CONF = 0x9,
-+ HTT_10X_T2H_MSG_TYPE_RX_FRAG_IND = 0xa,
-+ HTT_10X_T2H_MSG_TYPE_SEC_IND = 0xb,
-+ HTT_10X_T2H_MSG_TYPE_RC_UPDATE_IND = 0xc,
-+ HTT_10X_T2H_MSG_TYPE_TX_INSPECT_IND = 0xd,
-+ HTT_10X_T2H_MSG_TYPE_TEST = 0xe,
-+ HTT_10X_T2H_MSG_TYPE_CHAN_CHANGE = 0xf,
-+ HTT_10X_T2H_MSG_TYPE_AGGR_CONF = 0x11,
-+ HTT_10X_T2H_MSG_TYPE_STATS_NOUPLOAD = 0x12,
-+ HTT_10X_T2H_MSG_TYPE_MGMT_TX_COMPL_IND = 0x13,
-+ /* keep this last */
-+ HTT_10X_T2H_NUM_MSGS
-+};
-+
-+enum htt_tlv_t2h_msg_type {
-+ HTT_TLV_T2H_MSG_TYPE_VERSION_CONF = 0x0,
-+ HTT_TLV_T2H_MSG_TYPE_RX_IND = 0x1,
-+ HTT_TLV_T2H_MSG_TYPE_RX_FLUSH = 0x2,
-+ HTT_TLV_T2H_MSG_TYPE_PEER_MAP = 0x3,
-+ HTT_TLV_T2H_MSG_TYPE_PEER_UNMAP = 0x4,
-+ HTT_TLV_T2H_MSG_TYPE_RX_ADDBA = 0x5,
-+ HTT_TLV_T2H_MSG_TYPE_RX_DELBA = 0x6,
-+ HTT_TLV_T2H_MSG_TYPE_TX_COMPL_IND = 0x7,
-+ HTT_TLV_T2H_MSG_TYPE_PKTLOG = 0x8,
-+ HTT_TLV_T2H_MSG_TYPE_STATS_CONF = 0x9,
-+ HTT_TLV_T2H_MSG_TYPE_RX_FRAG_IND = 0xa,
-+ HTT_TLV_T2H_MSG_TYPE_SEC_IND = 0xb,
-+ HTT_TLV_T2H_MSG_TYPE_RC_UPDATE_IND = 0xc, /* deprecated */
-+ HTT_TLV_T2H_MSG_TYPE_TX_INSPECT_IND = 0xd,
-+ HTT_TLV_T2H_MSG_TYPE_MGMT_TX_COMPL_IND = 0xe,
-+ HTT_TLV_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND = 0xf,
-+ HTT_TLV_T2H_MSG_TYPE_RX_PN_IND = 0x10,
-+ HTT_TLV_T2H_MSG_TYPE_RX_OFFLOAD_DELIVER_IND = 0x11,
-+ HTT_TLV_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND = 0x12,
- /* 0x13 reservd */
-- HTT_T2H_MSG_TYPE_WDI_IPA_OP_RESPONSE = 0x14,
-+ HTT_TLV_T2H_MSG_TYPE_WDI_IPA_OP_RESPONSE = 0x14,
-+ HTT_TLV_T2H_MSG_TYPE_CHAN_CHANGE = 0x15,
-+ HTT_TLV_T2H_MSG_TYPE_RX_OFLD_PKT_ERR = 0x16,
-+ HTT_TLV_T2H_MSG_TYPE_TEST,
-+ /* keep this last */
-+ HTT_TLV_T2H_NUM_MSGS
-+};
-
-- /* FIXME: Do not depend on this event id. Numbering of this event id is
-- * broken across different firmware revisions and HTT version fails to
-- * indicate this.
-- */
-+enum htt_t2h_msg_type {
-+ HTT_T2H_MSG_TYPE_VERSION_CONF,
-+ HTT_T2H_MSG_TYPE_RX_IND,
-+ HTT_T2H_MSG_TYPE_RX_FLUSH,
-+ HTT_T2H_MSG_TYPE_PEER_MAP,
-+ HTT_T2H_MSG_TYPE_PEER_UNMAP,
-+ HTT_T2H_MSG_TYPE_RX_ADDBA,
-+ HTT_T2H_MSG_TYPE_RX_DELBA,
-+ HTT_T2H_MSG_TYPE_TX_COMPL_IND,
-+ HTT_T2H_MSG_TYPE_PKTLOG,
-+ HTT_T2H_MSG_TYPE_STATS_CONF,
-+ HTT_T2H_MSG_TYPE_RX_FRAG_IND,
-+ HTT_T2H_MSG_TYPE_SEC_IND,
-+ HTT_T2H_MSG_TYPE_RC_UPDATE_IND,
-+ HTT_T2H_MSG_TYPE_TX_INSPECT_IND,
-+ HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION,
-+ HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND,
-+ HTT_T2H_MSG_TYPE_RX_PN_IND,
-+ HTT_T2H_MSG_TYPE_RX_OFFLOAD_DELIVER_IND,
-+ HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND,
-+ HTT_T2H_MSG_TYPE_WDI_IPA_OP_RESPONSE,
-+ HTT_T2H_MSG_TYPE_CHAN_CHANGE,
-+ HTT_T2H_MSG_TYPE_RX_OFLD_PKT_ERR,
-+ HTT_T2H_MSG_TYPE_AGGR_CONF,
-+ HTT_T2H_MSG_TYPE_STATS_NOUPLOAD,
- HTT_T2H_MSG_TYPE_TEST,
--
- /* keep this last */
- HTT_T2H_NUM_MSGS
- };
-@@ -1248,6 +1322,10 @@ struct ath10k_htt {
- u8 target_version_major;
- u8 target_version_minor;
- struct completion target_version_received;
-+ enum ath10k_fw_htt_op_version op_version;
-+
-+ const enum htt_t2h_msg_type *t2h_msg_types;
-+ u32 t2h_msg_types_max;
-
- struct {
- /*
-diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
-index 01a2b38..21e9253 100644
---- a/drivers/net/wireless/ath/ath10k/htt_rx.c
-+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
-@@ -1892,6 +1892,7 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
- {
- struct ath10k_htt *htt = &ar->htt;
- struct htt_resp *resp = (struct htt_resp *)skb->data;
-+ enum htt_t2h_msg_type type;
-
- /* confirm alignment */
- if (!IS_ALIGNED((unsigned long)skb->data, 4))
-@@ -1899,7 +1900,16 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
-
- ath10k_dbg(ar, ATH10K_DBG_HTT, "htt rx, msg_type: 0x%0X\n",
- resp->hdr.msg_type);
-- switch (resp->hdr.msg_type) {
-+
-+ if (resp->hdr.msg_type >= ar->htt.t2h_msg_types_max) {
-+ ath10k_dbg(ar, ATH10K_DBG_HTT, "htt rx, unsupported msg_type: 0x%0X\n max: 0x%0X",
-+ resp->hdr.msg_type, ar->htt.t2h_msg_types_max);
-+ dev_kfree_skb_any(skb);
-+ return;
-+ }
-+ type = ar->htt.t2h_msg_types[resp->hdr.msg_type];
-+
-+ switch (type) {
- case HTT_T2H_MSG_TYPE_VERSION_CONF: {
- htt->target_version_major = resp->ver_resp.major;
- htt->target_version_minor = resp->ver_resp.minor;
-@@ -1976,7 +1986,6 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
- break;
- }
- case HTT_T2H_MSG_TYPE_TEST:
-- /* FIX THIS */
- break;
- case HTT_T2H_MSG_TYPE_STATS_CONF:
- trace_ath10k_htt_stats(ar, skb->data, skb->len);
-@@ -2018,11 +2027,8 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
- return;
- }
- case HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND:
-- /* FIXME: This WMI-TLV event is overlapping with 10.2
-- * CHAN_CHANGE - both being 0xF. Neither is being used in
-- * practice so no immediate action is necessary. Nevertheless
-- * HTT may need an abstraction layer like WMI has one day.
-- */
-+ break;
-+ case HTT_T2H_MSG_TYPE_CHAN_CHANGE:
- break;
- default:
- ath10k_warn(ar, "htt event (%d) not handled\n",
-diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
-index 22c993d..c236dd3 100644
---- a/drivers/net/wireless/ath/ath10k/hw.h
-+++ b/drivers/net/wireless/ath/ath10k/hw.h
-@@ -104,6 +104,11 @@ enum ath10k_fw_ie_type {
- * FW API 4 and above.
- */
- ATH10K_FW_IE_WMI_OP_VERSION = 5,
-+
-+ /* HTT "operations" interface version, 32 bit value. Supported from
-+ * FW API 5 and above.
-+ */
-+ ATH10K_FW_IE_HTT_OP_VERSION = 6,
- };
-
- enum ath10k_fw_wmi_op_version {
-@@ -119,6 +124,20 @@ enum ath10k_fw_wmi_op_version {
- ATH10K_FW_WMI_OP_VERSION_MAX,
- };
-
-+enum ath10k_fw_htt_op_version {
-+ ATH10K_FW_HTT_OP_VERSION_UNSET = 0,
-+
-+ ATH10K_FW_HTT_OP_VERSION_MAIN = 1,
-+
-+ /* also used in 10.2 and 10.2.4 branches */
-+ ATH10K_FW_HTT_OP_VERSION_10_1 = 2,
-+
-+ ATH10K_FW_HTT_OP_VERSION_TLV = 3,
-+
-+ /* keep last */
-+ ATH10K_FW_HTT_OP_VERSION_MAX,
-+};
-+
- enum ath10k_hw_rev {
- ATH10K_HW_QCA988X,
- ATH10K_HW_QCA6174,
+++ /dev/null
-diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
-index f3788e2..1c74585d 100644
---- a/drivers/net/wireless/ath/ath10k/core.c
-+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -741,6 +741,13 @@ static int ath10k_core_fetch_firmware_files(struct ath10k *ar)
- /* calibration file is optional, don't check for any errors */
- ath10k_fetch_cal_file(ar);
-
-+ ar->fw_api = 5;
-+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
-+
-+ ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API5_FILE);
-+ if (ret == 0)
-+ goto success;
-+
- ar->fw_api = 4;
- ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
-
-diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
-index c236dd3..46e14d1 100644
---- a/drivers/net/wireless/ath/ath10k/hw.h
-+++ b/drivers/net/wireless/ath/ath10k/hw.h
-@@ -78,6 +78,9 @@ enum qca6174_chip_id_rev {
- /* added support for ATH10K_FW_IE_WMI_OP_VERSION */
- #define ATH10K_FW_API4_FILE "firmware-4.bin"
-
-+/* HTT id conflict fix for management frames over HTT */
-+#define ATH10K_FW_API5_FILE "firmware-5.bin"
-+
- #define ATH10K_FW_UTF_FILE "utf.bin"
-
- /* includes also the null byte */
-diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
-index b4aacfa..262a84f 100644
---- a/drivers/net/wireless/ath/ath10k/pci.c
-+++ b/drivers/net/wireless/ath/ath10k/pci.c
-@@ -2780,5 +2780,6 @@ MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_FW_FILE);
- MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" ATH10K_FW_API2_FILE);
- MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" ATH10K_FW_API3_FILE);
-+MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" ATH10K_FW_API5_FILE);
- MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_BOARD_DATA_FILE);
-
- /* QCA6174 2.1 firmware files */
+++ /dev/null
---- a/drivers/net/wireless/ath/ath10k/core.c
-+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -1002,6 +1002,29 @@ static int ath10k_core_init_firmware_fea
- return -EINVAL;
- }
-
-+ /* Backwards compatibility for firmwares without
-+ * ATH10K_FW_IE_HTT_OP_VERSION.
-+ */
-+ if (ar->htt.op_version == ATH10K_FW_HTT_OP_VERSION_UNSET) {
-+ switch (ar->wmi.op_version) {
-+ case ATH10K_FW_WMI_OP_VERSION_MAIN:
-+ ar->htt.op_version = ATH10K_FW_HTT_OP_VERSION_MAIN;
-+ break;
-+ case ATH10K_FW_WMI_OP_VERSION_10_1:
-+ case ATH10K_FW_WMI_OP_VERSION_10_2:
-+ case ATH10K_FW_WMI_OP_VERSION_10_2_4:
-+ ar->htt.op_version = ATH10K_FW_HTT_OP_VERSION_10_1;
-+ break;
-+ case ATH10K_FW_WMI_OP_VERSION_TLV:
-+ ar->htt.op_version = ATH10K_FW_HTT_OP_VERSION_TLV;
-+ break;
-+ case ATH10K_FW_WMI_OP_VERSION_UNSET:
-+ case ATH10K_FW_WMI_OP_VERSION_MAX:
-+ WARN_ON(1);
-+ return -EINVAL;
-+ }
-+ }
-+
- return 0;
- }
-
---- a/drivers/net/wireless/ath/ath10k/htt.c
-+++ b/drivers/net/wireless/ath/ath10k/htt.c
-@@ -156,11 +156,11 @@ int ath10k_htt_init(struct ath10k *ar)
- ar->htt.t2h_msg_types_max = HTT_TLV_T2H_NUM_MSGS;
- break;
- case ATH10K_FW_HTT_OP_VERSION_MAIN:
-- case ATH10K_FW_HTT_OP_VERSION_UNSET:
- ar->htt.t2h_msg_types = htt_main_t2h_msg_types;
- ar->htt.t2h_msg_types_max = HTT_MAIN_T2H_NUM_MSGS;
- break;
- case ATH10K_FW_HTT_OP_VERSION_MAX:
-+ case ATH10K_FW_HTT_OP_VERSION_UNSET:
- WARN_ON(1);
- return -EINVAL;
- }
include $(TOPDIR)/rules.mk
PKG_NAME:=mt76
-PKG_VERSION:=2015-06-15
+PKG_VERSION:=2015-07-06
PKG_RELEASE=1
PKG_LICENSE:=GPLv2
PKG_SOURCE_URL:=https://github.com/openwrt/mt76
PKG_SOURCE_PROTO:=git
PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=ec91841868a554375b3019bcfaa13ae6d20fe91c
+PKG_SOURCE_VERSION:=d1a6945d777d667185cb2dcddcf15fd334f80fa0
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
PKG_MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
projects / openwrt.git / commitdiff