+++ /dev/null
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -54,6 +54,7 @@
- #include <asm/types.h>
- #include <asm/stacktrace.h>
- #include <asm/uasm.h>
-+#include <asm/time.h>
-
- extern void check_wait(void);
- extern asmlinkage void r4k_wait(void);
-@@ -1583,6 +1584,8 @@ void __cpuinit per_cpu_trap_init(void)
- if (cpu_has_mips_r2) {
- cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
- cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
-+ if (get_c0_compare_irq)
-+ cp0_compare_irq = get_c0_compare_irq();
- cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
- if (cp0_perfcount_irq == cp0_compare_irq)
- cp0_perfcount_irq = -1;
---- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
- */
- #ifdef CONFIG_CEVT_R4K_LIB
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- extern int r4k_clockevent_init(void);
- #endif
-
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1627,7 +1627,7 @@ static int __xipram do_erase_chip(struct
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr))
-+ if (chip_good(map, adr, map_word_ff(map)))
- break;
-
- if (time_after(jiffies, timeo)) {
-@@ -1715,7 +1715,7 @@ static int __xipram do_erase_oneblock(st
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr)) {
-+ if (chip_good(map, adr, map_word_ff(map))) {
- xip_enable(map, chip, adr);
- break;
- }
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -39,7 +39,7 @@
- #include <linux/mtd/xip.h>
-
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-
- #define MAX_WORD_RETRIES 3
-
-@@ -50,7 +50,9 @@
-
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -183,6 +185,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
-
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd)
- {
- struct map_info *map = mtd->priv;
-@@ -192,6 +195,7 @@ static void fixup_use_write_buffers(stru
- mtd->write = cfi_amdstd_write_buffers;
- }
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd)
-@@ -1372,6 +1376,7 @@ static int cfi_amdstd_write_words(struct
- /*
- * FIXME: interleaved mode not tested, and probably not supported!
- */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- unsigned long adr, const u_char *buf,
- int len)
-@@ -1483,7 +1488,6 @@ static int __xipram do_write_buffer(stru
- return ret;
- }
-
--
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
- {
-@@ -1562,6 +1566,7 @@ static int cfi_amdstd_write_buffers(stru
-
- return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
-
-
- /*
+++ /dev/null
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -87,6 +87,9 @@ config ATH79
- help
- Support for the Atheros AR71XX/AR724X/AR913X SoCs.
-
-+config MIPS_RALINK
-+ bool "Ralink MIPS SoC based boards"
-+
- config BCM47XX
- bool "Broadcom BCM47XX based boards"
- select CEVT_R4K
-@@ -794,6 +797,7 @@ source "arch/mips/jz4740/Kconfig"
- source "arch/mips/lantiq/Kconfig"
- source "arch/mips/lasat/Kconfig"
- source "arch/mips/pmc-sierra/Kconfig"
-+source "arch/mips/ralink/Kconfig"
- source "arch/mips/powertv/Kconfig"
- source "arch/mips/sgi-ip27/Kconfig"
- source "arch/mips/sibyte/Kconfig"
-@@ -1143,7 +1147,7 @@ config BOOT_ELF32
-
- config MIPS_L1_CACHE_SHIFT
- int
-- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
-+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X
- default "6" if MIPS_CPU_SCACHE
- default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
- default "5"
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -21,6 +21,7 @@ platforms += pmc-sierra
- platforms += pnx833x
- platforms += pnx8550
- platforms += powertv
-+platforms += ralink
- platforms += rb532
- platforms += sgi-ip22
- platforms += sgi-ip27
+++ /dev/null
---- a/drivers/tty/serial/8250.c
-+++ b/drivers/tty/serial/8250.c
-@@ -318,9 +318,9 @@ static const struct serial8250_config ua
- },
- };
-
--#if defined(CONFIG_MIPS_ALCHEMY)
-+#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X)
-
--/* Au1x00 UART hardware has a weird register layout */
-+/* Au1x00 and RT288x UART hardware has a weird register layout */
- static const u8 au_io_in_map[] = {
- [UART_RX] = 0,
- [UART_IER] = 2,
-@@ -542,8 +542,8 @@ static inline void _serial_dl_write(stru
- serial_outp(up, UART_DLM, value >> 8 & 0xff);
- }
-
--#if defined(CONFIG_MIPS_ALCHEMY)
--/* Au1x00 haven't got a standard divisor latch */
-+#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X)
-+/* Au1x00 and RT288x haven't got a standard divisor latch */
- static int serial_dl_read(struct uart_8250_port *up)
- {
- if (up->port.iotype == UPIO_AU)
-@@ -750,22 +750,19 @@ static int size_fifo(struct uart_8250_po
- */
- static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
- {
-- unsigned char old_dll, old_dlm, old_lcr;
-+ unsigned char old_lcr;
-+ unsigned int old_dl;
- unsigned int id;
-
- old_lcr = serial_inp(p, UART_LCR);
- serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A);
-
-- old_dll = serial_inp(p, UART_DLL);
-- old_dlm = serial_inp(p, UART_DLM);
-+ old_dl = serial_dl_read(p);
-
-- serial_outp(p, UART_DLL, 0);
-- serial_outp(p, UART_DLM, 0);
-+ serial_dl_write(p, 0);
-+ id = serial_dl_read(p);
-
-- id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
--
-- serial_outp(p, UART_DLL, old_dll);
-- serial_outp(p, UART_DLM, old_dlm);
-+ serial_dl_write(p, old_dl);
- serial_outp(p, UART_LCR, old_lcr);
-
- return id;
-@@ -891,7 +888,7 @@ static int broken_efr(struct uart_8250_p
- /*
- * Exar ST16C2550 "A2" devices incorrectly detect as
- * having an EFR, and report an ID of 0x0201. See
-- * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
-+ * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
- */
- if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
- return 1;
---- a/drivers/tty/serial/Kconfig
-+++ b/drivers/tty/serial/Kconfig
-@@ -258,6 +258,14 @@ config SERIAL_8250_ACORN
- system, say Y to this option. The driver can handle 1, 2, or 3 port
- cards. If unsure, say N.
-
-+config SERIAL_8250_RT288X
-+ bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
-+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
-+ help
-+ If you have a Ralink RT288x/RT305x SoC based board and want to use the
-+ serial port, say Y to this option. The driver can handle up to 2 serial
-+ ports. If unsure, say N.
-+
- config SERIAL_8250_RM9K
- bool "Support for MIPS RM9xxx integrated serial port"
- depends on SERIAL_8250 != n && SERIAL_RM9000
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -317,7 +317,7 @@ struct uart_port {
- #define UPIO_HUB6 (1)
- #define UPIO_MEM (2)
- #define UPIO_MEM32 (3)
--#define UPIO_AU (4) /* Au1x00 type IO */
-+#define UPIO_AU (4) /* Au1x00 and RT288x type IO */
- #define UPIO_TSI (5) /* Tsi108/109 type IO */
- #define UPIO_RM9000 (6) /* RM9000 type IO */
-
+++ /dev/null
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
- obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
- ops-bcm63xx.o
- obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
-+obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o
-
- #
- # These are still pretty much in the old state, watch, go blind.
+++ /dev/null
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -143,6 +143,7 @@ source "drivers/net/ethernet/packetengin
- source "drivers/net/ethernet/pasemi/Kconfig"
- source "drivers/net/ethernet/qlogic/Kconfig"
- source "drivers/net/ethernet/racal/Kconfig"
-+source "drivers/net/ethernet/ramips/Kconfig"
- source "drivers/net/ethernet/realtek/Kconfig"
- source "drivers/net/ethernet/renesas/Kconfig"
- source "drivers/net/ethernet/rdc/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -53,6 +53,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
- obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
- obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
- obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
-+obj-$(CONFIG_NET_RAMIPS) += ramips/
- obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
- obj-$(CONFIG_SH_ETH) += renesas/
- obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
+++ /dev/null
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1020,6 +1020,13 @@ config LANTIQ_WDT
- help
- Hardware driver for the Lantiq SoC Watchdog Timer.
-
-+config RAMIPS_WDT
-+ tristate "Ralink RT288X/RT305X Watchdog Timer"
-+ depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883)
-+ help
-+ Hardware driver for the built-in watchdog timer on the
-+ Ralink RT288X/RT305X SoCs.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -131,6 +131,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
- obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
- octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
- obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
-+obj-$(CONFIG_RAMIPS_WDT) += ramips_wdt.o
-
- # PARISC Architecture
-
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -289,6 +289,12 @@ config SPI_PXA2XX
- config SPI_PXA2XX_PCI
- def_bool SPI_PXA2XX && X86_32 && PCI
-
-+config SPI_RAMIPS
-+ tristate "Ralink RT288x/RT305x SPI Controller"
-+ depends on (SOC_RT288X || SOC_RT305X) && SPI_MASTER
-+ help
-+ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C2410 && EXPERIMENTAL
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o
- obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
- obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
- obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
-+obj-$(CONFIG_SPI_RAMIPS) += spi-ramips.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y := spi-s3c24xx.o
- spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
+++ /dev/null
---- a/drivers/usb/Kconfig
-+++ b/drivers/usb/Kconfig
-@@ -181,4 +181,6 @@ source "drivers/usb/gadget/Kconfig"
-
- source "drivers/usb/otg/Kconfig"
-
-+source "drivers/usb/dwc_otg/Kconfig"
-+
- endif # USB_SUPPORT
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -49,6 +49,8 @@ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early
- obj-$(CONFIG_USB_ATM) += atm/
- obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
-
-+obj-$(CONFIG_DWC_OTG) += dwc_otg/
-+
- obj-$(CONFIG_USB_MUSB_HDRC) += musb/
- obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/
- obj-$(CONFIG_USB_OTG_UTILS) += otg/
+++ /dev/null
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
- ops-bcm63xx.o
- obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
- obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o
-+obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
-
- #
- # These are still pretty much in the old state, watch, go blind.
+++ /dev/null
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -217,6 +217,15 @@ config USB_EHCI_ATH79
- Enables support for the built-in EHCI controller present
- on the Atheros AR7XXX/AR9XXX SoCs.
-
-+config USB_EHCI_RT3883
-+ bool "EHCI support for Ralink RT3662/RT3883 SoCs"
-+ depends on USB_EHCI_HCD && SOC_RT3883
-+ select USB_EHCI_ROOT_HUB_TT
-+ default y
-+ ---help---
-+ Enables support for the built-in EHCI controller present
-+ on the Ralink RT3883 SoC.
-+
- config USB_OXU210HP_HCD
- tristate "OXU210HP HCD support"
- depends on USB
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1329,6 +1329,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ehci_xls_driver
- #endif
-
-+#ifdef CONFIG_USB_EHCI_RT3883
-+#include "ehci-rt3883.c"
-+#define PLATFORM_DRIVER ehci_rt3883_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
- !defined(XILINX_OF_PLATFORM_DRIVER)
+++ /dev/null
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -319,6 +319,14 @@ config USB_OHCI_ATH79
- Enables support for the built-in OHCI controller present on the
- Atheros AR71XX/AR7240 SoCs.
-
-+config USB_OHCI_RT3883
-+ bool "USB OHCI support for the Ralink RT3883 SoCs"
-+ depends on USB_OHCI_HCD && SOC_RT3883
-+ default y
-+ help
-+ Enables support for the built-in OHCI controller present on the
-+ Ralink RT3883 SoC.
-+
- config USB_OHCI_HCD_PPC_SOC
- bool "OHCI support for on-chip PPC USB controller"
- depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1116,6 +1116,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ohci_xls_driver
- #endif
-
-+#ifdef CONFIG_USB_OHCI_RT3883
-+#include "ohci-rt3883.c"
-+#define PLATFORM_DRIVER ohci_rt3883_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && \
- !defined(PLATFORM_DRIVER) && \
- !defined(OMAP1_PLATFORM_DRIVER) && \
+++ /dev/null
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ATH79 is not set
-CONFIG_BCMA_POSSIBLE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=m
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-# CONFIG_LANTIQ is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_MII is not set
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MIPS_RALINK=y
-# CONFIG_MLX4_CORE is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RAMIPS=y
-# CONFIG_NET_RAMIPS_DEBUG is not set
-# CONFIG_NET_RAMIPS_DEBUG_FS is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_QUOTACTL is not set
-CONFIG_RALINK_DEV_GPIO_BUTTONS=y
-CONFIG_RALINK_DEV_GPIO_LEDS=y
-CONFIG_RALINK_RT288X=y
-# CONFIG_RALINK_RT305X is not set
-# CONFIG_RALINK_RT3883 is not set
-CONFIG_RAMIPS_WDT=y
-CONFIG_RT288X_MACH_F5D8235_V1=y
-CONFIG_RT288X_MACH_RT_N15=y
-CONFIG_RT288X_MACH_V11ST_FE=y
-CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
-CONFIG_RT288X_MACH_WZR_AGL300NH=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_RT288X=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_XZ_DEC=y
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ATH79 is not set
-CONFIG_BCMA_POSSIBLE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DWC_OTG is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_RANDOM=m
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-# CONFIG_LANTIQ is not set
-# CONFIG_LEDS_GPIO is not set
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MII is not set
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MIPS_RALINK=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RAMIPS=y
-# CONFIG_NET_RAMIPS_DEBUG is not set
-# CONFIG_NET_RAMIPS_DEBUG_FS is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_QUOTACTL is not set
-CONFIG_RALINK_DEV_GPIO_BUTTONS=y
-CONFIG_RALINK_DEV_GPIO_LEDS=y
-# CONFIG_RALINK_RT288X is not set
-CONFIG_RALINK_RT305X=y
-# CONFIG_RALINK_RT3883 is not set
-CONFIG_RAMIPS_WDT=y
-CONFIG_RT305X_MACH_ALL0256N=y
-CONFIG_RT305X_MACH_ARGUS_ATP52B=y
-CONFIG_RT305X_MACH_BC2=y
-CONFIG_RT305X_MACH_DIR_300_REVB=y
-CONFIG_RT305X_MACH_ESR_9753=y
-CONFIG_RT305X_MACH_F5D8235_V2=y
-CONFIG_RT305X_MACH_FONERA20N=y
-CONFIG_RT305X_MACH_FREESTATION5=y
-CONFIG_RT305X_MACH_HW550_3G=y
-CONFIG_RT305X_MACH_MOFI3500_3GN=y
-CONFIG_RT305X_MACH_NBG_419N=y
-CONFIG_RT305X_MACH_NW718=y
-CONFIG_RT305X_MACH_OMNI_EMB=y
-CONFIG_RT305X_MACH_PWH2004=y
-CONFIG_RT305X_MACH_RT_G32_REVB=y
-CONFIG_RT305X_MACH_RT_N10_PLUS=y
-CONFIG_RT305X_MACH_SL_R7205=y
-CONFIG_RT305X_MACH_V22RW_2X2=y
-CONFIG_RT305X_MACH_W306R_V20=y
-CONFIG_RT305X_MACH_W502U=y
-CONFIG_RT305X_MACH_WCR150GN=y
-CONFIG_RT305X_MACH_WHR_G300N=y
-CONFIG_RT305X_MACH_WL341V3=y
-CONFIG_RT305X_MACH_WL351=y
-CONFIG_RT305X_MACH_WL_330N=y
-CONFIG_RT305X_MACH_WR512_3GN=y
-CONFIG_RT305X_MACH_WR6202=y
-CONFIG_RT305X_MACH_XDX_RN502J=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_RT305X=y
-CONFIG_SPI=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_RAMIPS=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_XHCI is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_XZ_DEC=y
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ATH79 is not set
-CONFIG_BCMA_POSSIBLE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=m
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-# CONFIG_LANTIQ is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_MII is not set
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MIPS_RALINK=y
-# CONFIG_MLX4_CORE is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RAMIPS=y
-# CONFIG_NET_RAMIPS_DEBUG is not set
-# CONFIG_NET_RAMIPS_DEBUG_FS is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_QUOTACTL is not set
-CONFIG_RALINK_DEV_GPIO_BUTTONS=y
-CONFIG_RALINK_DEV_GPIO_LEDS=y
-# CONFIG_RALINK_RT288X is not set
-# CONFIG_RALINK_RT305X is not set
-CONFIG_RALINK_RT3883=y
-CONFIG_RAMIPS_WDT=y
-CONFIG_RT3883_MACH_RT_N56U=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_RT3883=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XZ_DEC=y
-CONFIG_ZONE_DMA_FLAG=0
projects / openwrt.git / commitdiff