ARCH:=mipsel
BOARD:=ramips
-BOARDNAME:=Ralink RT288x/RT305x
-SUBTARGETS:=rt288x rt305x
+BOARDNAME:=Ralink RT288x/RT3xxx
+SUBTARGETS:=rt288x rt305x rt3883
CFLAGS:=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves
FEATURES:=squashfs
kmod-rt2800-pci wpad-mini maccalc
define Target/Description
- Build firmware images for Ralink RT288x/RT305x based boards.
+ Build firmware images for Ralink RT288x/RT3xxx based boards.
endef
$(eval $(call BuildTarget))
--- /dev/null
+/*
+ * Platform data definition for the built-in NAND controller of the
+ * Ralink RT305X/RT3662/RT3883 SoCs
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RAMIPS_NAND_PLATFORM_H
+#define _RAMIPS_NAND_PLATFORM_H
+
+#define RAMIPS_NAND_DRIVER_NAME "ramips-nand"
+
+struct ramips_nand_platform_data {
+ const char *name;
+ struct mtd_partition *parts;
+ int nr_parts;
+};
+
+#endif /* _RAMIPS_NAND_PLATFORM_H */
--- /dev/null
+/*
+ * Ralink RT3662/RT3883 SoC specific definitions
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RT3883_H_
+#define _RT3883_H_
+
+#include <linux/init.h>
+#include <linux/io.h>
+
+void rt3883_detect_sys_type(void);
+
+#define RT3883_MEM_SIZE_MIN (2 * 1024 * 1024)
+#define RT3883_MEM_SIZE_MAX (256 * 1024 * 1024)
+
+#define RT3883_CPU_IRQ_BASE 0
+#define RT3883_CPU_IRQ_COUNT 8
+#define RT3883_INTC_IRQ_BASE (RT3883_CPU_IRQ_BASE + RT3883_CPU_IRQ_COUNT)
+#define RT3883_INTC_IRQ_COUNT 32
+#define RT3883_GPIO_IRQ_BASE (RT3883_INTC_IRQ_BASE + RT3883_INTC_IRQ_COUNT)
+
+#define RT3883_CPU_IRQ_INTC (RT3883_CPU_IRQ_BASE + 2)
+#define RT3883_CPU_IRQ_PCI (RT3883_CPU_IRQ_BASE + 4)
+#define RT3883_CPU_IRQ_FE (RT3883_CPU_IRQ_BASE + 5)
+#define RT3883_CPU_IRQ_WLAN (RT3883_CPU_IRQ_BASE + 6)
+#define RT3883_CPU_IRQ_COUNTER (RT3883_CPU_IRQ_BASE + 7)
+
+#define RT3883_INTC_IRQ_SYSCTL (RT3883_INTC_IRQ_BASE + 0)
+#define RT3883_INTC_IRQ_TIMER0 (RT3883_INTC_IRQ_BASE + 1)
+#define RT3883_INTC_IRQ_TIMER1 (RT3883_INTC_IRQ_BASE + 2)
+#define RT3883_INTC_IRQ_IA (RT3883_INTC_IRQ_BASE + 3)
+#define RT3883_INTC_IRQ_PCM (RT3883_INTC_IRQ_BASE + 4)
+#define RT3883_INTC_IRQ_UART0 (RT3883_INTC_IRQ_BASE + 5)
+#define RT3883_INTC_IRQ_PIO (RT3883_INTC_IRQ_BASE + 6)
+#define RT3883_INTC_IRQ_DMA (RT3883_INTC_IRQ_BASE + 7)
+#define RT3883_INTC_IRQ_NAND (RT3883_INTC_IRQ_BASE + 8)
+#define RT3883_INTC_IRQ_PERFC (RT3883_INTC_IRQ_BASE + 9)
+#define RT3883_INTC_IRQ_I2S (RT3883_INTC_IRQ_BASE + 10)
+#define RT3883_INTC_IRQ_UART1 (RT3883_INTC_IRQ_BASE + 12)
+#define RT3883_INTC_IRQ_UHST (RT3883_INTC_IRQ_BASE + 18)
+#define RT3883_INTC_IRQ_UDEV (RT3883_INTC_IRQ_BASE + 19)
+
+extern void __iomem *rt3883_sysc_base;
+extern void __iomem *rt3883_memc_base;
+
+static inline void rt3883_sysc_wr(u32 val, unsigned reg)
+{
+ __raw_writel(val, rt3883_sysc_base + reg);
+}
+
+static inline u32 rt3883_sysc_rr(unsigned reg)
+{
+ return __raw_readl(rt3883_sysc_base + reg);
+}
+
+static inline void rt3883_memc_wr(u32 val, unsigned reg)
+{
+ __raw_writel(val, rt3883_memc_base + reg);
+}
+
+static inline u32 rt3883_memc_rr(unsigned reg)
+{
+ return __raw_readl(rt3883_memc_base + reg);
+}
+
+#define RT3883_GPIO_I2C_SD 1
+#define RT3883_GPIO_I2C_SCLK 2
+#define RT3883_GPIO_SPI_CS0 3
+#define RT3883_GPIO_SPI_CLK 4
+#define RT3883_GPIO_SPI_MOSI 5
+#define RT3883_GPIO_SPI_MISO 6
+/* GPIO 7-14 is shared between UART0, PCM and I2S interfaces */
+#define RT3883_GPIO_7 7
+#define RT3883_GPIO_8 8
+#define RT3883_GPIO_9 9
+#define RT3883_GPIO_10 10
+#define RT3883_GPIO_11 11
+#define RT3883_GPIO_12 12
+#define RT3883_GPIO_13 13
+#define RT3883_GPIO_14 14
+#define RT3883_GPIO_UART1_TXD 15
+#define RT3883_GPIO_UART1_RXD 16
+#define RT3883_GPIO_JTAG_TDO 17
+#define RT3883_GPIO_JTAG_TDI 18
+#define RT3883_GPIO_JTAG_TMS 19
+#define RT3883_GPIO_JTAG_TCLK 20
+#define RT3883_GPIO_JTAG_TRST_N 21
+#define RT3883_GPIO_MDIO_MDC 22
+#define RT3883_GPIO_MDIO_MDIO 23
+#define RT3883_GPIO_LNA_PE_A0 32
+#define RT3883_GPIO_LNA_PE_A1 33
+#define RT3883_GPIO_LNA_PE_A2 34
+#define RT3883_GPIO_LNA_PE_G0 35
+#define RT3883_GPIO_LNA_PE_G1 36
+#define RT3883_GPIO_LNA_PE_G2 37
+#define RT3883_GPIO_PCI_AD0 40
+#define RT3883_GPIO_PCI_AD31 71
+#define RT3883_GPIO_GE2_TXD0 72
+#define RT3883_GPIO_GE2_TXD1 73
+#define RT3883_GPIO_GE2_TXD2 74
+#define RT3883_GPIO_GE2_TXD3 75
+#define RT3883_GPIO_GE2_TXEN 76
+#define RT3883_GPIO_GE2_TXCLK 77
+#define RT3883_GPIO_GE2_RXD0 78
+#define RT3883_GPIO_GE2_RXD1 79
+#define RT3883_GPIO_GE2_RXD2 80
+#define RT3883_GPIO_GE2_RXD3 81
+#define RT3883_GPIO_GE2_RXDV 82
+#define RT3883_GPIO_GE2_RXCLK 83
+#define RT3883_GPIO_GE1_TXD0 84
+#define RT3883_GPIO_GE1_TXD1 85
+#define RT3883_GPIO_GE1_TXD2 86
+#define RT3883_GPIO_GE1_TXD3 87
+#define RT3883_GPIO_GE1_TXEN 88
+#define RT3883_GPIO_GE1_TXCLK 89
+#define RT3883_GPIO_GE1_RXD0 90
+#define RT3883_GPIO_GE1_RXD1 91
+#define RT3883_GPIO_GE1_RXD2 92
+#define RT3883_GPIO_GE1_RXD3 93
+#define RT3883_GPIO_GE1_RXDV 94
+#define RT3883_GPIO_GE1_RXCLK 95
+
+void rt3883_gpio_init(u32 mode);
+
+#endif /* _RT3883_H_ */
--- /dev/null
+/*
+ * Ralink RT3662/RT3883 specific CPU feature overrides
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: include/asm-mips/cpu-features.h
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_sb1_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+#define cpu_has_watch 1
+#define cpu_has_divec 1
+
+#define cpu_has_prefetch 1
+#define cpu_has_ejtag 1
+#define cpu_has_llsc 1
+
+#define cpu_has_mips16 1
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+
+#define cpu_has_mips32r1 1
+#define cpu_has_mips32r2 1
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_64bit_gp_regs 0
+#define cpu_has_64bit_addresses 0
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+
+#endif /* __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H */
--- /dev/null
+/*
+ * Ralink RT3662/RT3883 specific SOC defines
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RT3883_RALINK_SOC_H
+#define _RT3883_RALINK_SOC_H
+
+#define RALINK_SOC_SDRAM_BASE 0
+#define RALINK_SOC_MEM_SIZE_MIN (2 * 1024 * 1024)
+#define RALINK_SOC_MEM_SIZE_MAX (256 * 1024 * 1024)
+
+#endif /* _RT3883_RALINK_SOC_H */
--- /dev/null
+/*
+ * Platform data definition for built-in EHCI controller of the
+ * Ralink RT3662/RT3883 SoCs
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RT3883_EHCI_PLATFORM_H
+#define _RT3883_EHCI_PLATFORM_H
+
+struct rt3883_ehci_platform_data {
+ void (*start_hw)(void);
+ void (*stop_hw)(void);
+};
+
+#endif /* _RT3883_EHCI_PLATFORM_H */
--- /dev/null
+/*
+ * Platform data definition for built-in OHCI controller of the
+ * Ralink RT3662/RT3883 SoCs
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RT3883_OHCI_PLATFORM_H
+#define _RT3883_OHCI_PLATFORM_H
+
+struct rt3883_ohci_platform_data {
+ void (*start_hw)(void);
+ void (*stop_hw)(void);
+};
+
+#endif /* _RT3883_OHCI_PLATFORM_H */
--- /dev/null
+/*
+ * Ralink RT3662/RT3883 SoC register definitions
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RT3883_REGS_H_
+#define _RT3883_REGS_H_
+
+#include <linux/bitops.h>
+
+#define RT3883_SDRAM_BASE 0x00000000
+#define RT3883_SYSC_BASE 0x10000000
+#define RT3883_TIMER_BASE 0x10000100
+#define RT3883_INTC_BASE 0x10000200
+#define RT3883_MEMC_BASE 0x10000300
+#define RT3883_UART0_BASE 0x10000500
+#define RT3883_PIO_BASE 0x10000600
+#define RT3883_FSCC_BASE 0x10000700
+#define RT3883_NANDC_BASE 0x10000810
+#define RT3883_I2C_BASE 0x10000900
+#define RT3883_I2S_BASE 0x10000a00
+#define RT3883_SPI_BASE 0x10000b00
+#define RT3883_UART1_BASE 0x10000c00
+#define RT3883_PCM_BASE 0x10002000
+#define RT3883_GDMA_BASE 0x10002800
+#define RT3883_CODEC1_BASE 0x10003000
+#define RT3883_CODEC2_BASE 0x10003800
+#define RT3883_FE_BASE 0x10100000
+#define RT3883_ROM_BASE 0x10118000
+#define RT3883_USBDEV_BASE 0x10112000
+#define RT3883_PCI_BASE 0x10140000
+#define RT3883_WLAN_BASE 0x10180000
+#define RT3883_USBHOST_BASE 0x101c0000
+#define RT3883_BOOT_BASE 0x1c000000
+#define RT3883_SRAM_BASE 0x1e000000
+#define RT3883_PCIMEM_BASE 0x20000000
+
+#define RT3883_EHCI_BASE (RT3883_USBHOST_BASE)
+#define RT3883_OHCI_BASE (RT3883_USBHOST_BASE + 0x1000)
+
+#define RT3883_SYSC_SIZE 0x100
+#define RT3883_TIMER_SIZE 0x100
+#define RT3883_INTC_SIZE 0x100
+#define RT3883_MEMC_SIZE 0x100
+#define RT3883_UART0_SIZE 0x100
+#define RT3883_UART1_SIZE 0x100
+#define RT3883_PIO_SIZE 0x100
+#define RT3883_FSCC_SIZE 0x100
+#define RT3883_NANDC_SIZE 0x0f0
+#define RT3883_I2C_SIZE 0x100
+#define RT3883_I2S_SIZE 0x100
+#define RT3883_SPI_SIZE 0x100
+#define RT3883_PCM_SIZE 0x800
+#define RT3883_GDMA_SIZE 0x800
+#define RT3883_CODEC1_SIZE 0x800
+#define RT3883_CODEC2_SIZE 0x800
+#define RT3883_FE_SIZE 0x10000
+#define RT3883_ROM_SIZE 0x4000
+#define RT3883_USBDEV_SIZE 0x4000
+#define RT3883_PCI_SIZE 0x40000
+#define RT3883_WLAN_SIZE 0x40000
+#define RT3883_USBHOST_SIZE 0x40000
+#define RT3883_BOOT_SIZE (32 * 1024 * 1024)
+#define RT3883_SRAM_SIZE (32 * 1024 * 1024)
+
+/* SYSC registers */
+#define RT3883_SYSC_REG_CHIPID0_3 0x00 /* Chip ID 0 */
+#define RT3883_SYSC_REG_CHIPID4_7 0x04 /* Chip ID 1 */
+#define RT3883_SYSC_REG_REVID 0x0c /* Chip Revision Identification */
+#define RT3883_SYSC_REG_SYSCFG0 0x10 /* System Configuration 0 */
+#define RT3883_SYSC_REG_SYSCFG1 0x14 /* System Configuration 1 */
+#define RT3883_SYSC_REG_CLKCFG0 0x2c /* Clock Configuration 0 */
+#define RT3883_SYSC_REG_CLKCFG1 0x30 /* Clock Configuration 1 */
+#define RT3883_SYSC_REG_RSTCTRL 0x34 /* Reset Control*/
+#define RT3883_SYSC_REG_RSTSTAT 0x38 /* Reset Status*/
+#define RT3883_SYSC_REG_USB_PS 0x5c /* USB Power saving control */
+#define RT3883_SYSC_REG_GPIO_MODE 0x60 /* GPIO Purpose Select */
+#define RT3883_SYSC_REG_PMU 0x88
+#define RT3883_SYSC_REG_PMU1 0x8c
+
+#define RT3883_REVID_VER_ID_MASK 0x0f
+#define RT3883_REVID_VER_ID_SHIFT 8
+#define RT3883_REVID_ECO_ID_MASK 0x0f
+
+#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17)
+#define RT3883_SYSCFG0_CPUCLK_SHIFT 8
+#define RT3883_SYSCFG0_CPUCLK_MASK 0x3
+#define RT3883_SYSCFG0_CPUCLK_250 0x0
+#define RT3883_SYSCFG0_CPUCLK_384 0x1
+#define RT3883_SYSCFG0_CPUCLK_480 0x2
+#define RT3883_SYSCFG0_CPUCLK_500 0x3
+
+#define RT3883_SYSCFG1_USB0_HOST_MODE BIT(10)
+#define RT3883_SYSCFG1_GPIO2_AS_WDT_OUT BIT(2)
+
+#define RT3883_CLKCFG1_UPHY1_CLK_EN BIT(20)
+#define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18)
+
+#define RT3883_GPIO_MODE_I2C BIT(0)
+#define RT3883_GPIO_MODE_SPI BIT(1)
+#define RT3883_GPIO_MODE_UART0_SHIFT 2
+#define RT3883_GPIO_MODE_UART0_MASK 0x7
+#define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT)
+#define RT3883_GPIO_MODE_UARTF 0x0
+#define RT3883_GPIO_MODE_PCM_UARTF 0x1
+#define RT3883_GPIO_MODE_PCM_I2S 0x2
+#define RT3883_GPIO_MODE_I2S_UARTF 0x3
+#define RT3883_GPIO_MODE_PCM_GPIO 0x4
+#define RT3883_GPIO_MODE_GPIO_UARTF 0x5
+#define RT3883_GPIO_MODE_GPIO_I2S 0x6
+#define RT3883_GPIO_MODE_GPIO 0x7
+#define RT3883_GPIO_MODE_UART1 BIT(5)
+#define RT3883_GPIO_MODE_JTAG BIT(6)
+#define RT3883_GPIO_MODE_MDIO BIT(7)
+#define RT3883_GPIO_MODE_GE1 BIT(9)
+#define RT3883_GPIO_MODE_GE2 BIT(10)
+#define RT3883_GPIO_MODE_PCI_SHIFT 11
+#define RT3883_GPIO_MODE_PCI_MASK 0x7
+#define RT3883_GPIO_MODE_PCI(_x) ((_x) << RT3883_GPIO_MODE_PCI_SHIFT)
+#define RT3883_GPIO_MODE_PCI_DEV 0
+#define RT3883_GPIO_MODE_PCI_HOST2 1
+#define RT3883_GPIO_MODE_PCI_HOST1 2
+#define RT3883_GPIO_MODE_PCI_FNC 3
+#define RT3883_GPIO_MODE_PCI_GPIO 7
+#define RT3883_GPIO_MODE_LNA_A_SHIFT 16
+#define RT3883_GPIO_MODE_LNA_A_MASK 0x3
+#define RT3883_GPIO_MODE_LNA_A(_x) ((_x) << RT3883_GPIO_MODE_LNA_A_SHIFT)
+#define RT3883_GPIO_MODE_LNA_A_GPIO 0x3
+#define RT3883_GPIO_MODE_LNA_G_SHIFT 18
+#define RT3883_GPIO_MODE_LNA_G_MASK 0x3
+#define RT3883_GPIO_MODE_LNA_G(_x) ((_x) << RT3883_GPIO_MODE_LNA_G_SHIFT)
+#define RT3883_GPIO_MODE_LNA_G_GPIO 0x3
+
+#define RT3883_RSTCTRL_PCIE_PCI_PDM BIT(27)
+#define RT3883_RSTCTRL_FLASH BIT(26)
+#define RT3883_RSTCTRL_UDEV BIT(25)
+#define RT3883_RSTCTRL_PCI BIT(24)
+#define RT3883_RSTCTRL_PCIE BIT(23)
+#define RT3883_RSTCTRL_UHST BIT(22)
+#define RT3883_RSTCTRL_FE BIT(21)
+#define RT3883_RSTCTRL_WLAN BIT(20)
+#define RT3883_RSTCTRL_UART1 BIT(29)
+#define RT3883_RSTCTRL_SPI BIT(18)
+#define RT3883_RSTCTRL_I2S BIT(17)
+#define RT3883_RSTCTRL_I2C BIT(16)
+#define RT3883_RSTCTRL_NAND BIT(15)
+#define RT3883_RSTCTRL_DMA BIT(14)
+#define RT3883_RSTCTRL_PIO BIT(13)
+#define RT3883_RSTCTRL_UART BIT(12)
+#define RT3883_RSTCTRL_PCM BIT(11)
+#define RT3883_RSTCTRL_MC BIT(10)
+#define RT3883_RSTCTRL_INTC BIT(9)
+#define RT3883_RSTCTRL_TIMER BIT(8)
+#define RT3883_RSTCTRL_SYS BIT(0)
+
+#define RT3883_INTC_INT_SYSCTL BIT(0)
+#define RT3883_INTC_INT_TIMER0 BIT(1)
+#define RT3883_INTC_INT_TIMER1 BIT(2)
+#define RT3883_INTC_INT_IA BIT(3)
+#define RT3883_INTC_INT_PCM BIT(4)
+#define RT3883_INTC_INT_UART0 BIT(5)
+#define RT3883_INTC_INT_PIO BIT(6)
+#define RT3883_INTC_INT_DMA BIT(7)
+#define RT3883_INTC_INT_NAND BIT(8)
+#define RT3883_INTC_INT_PERFC BIT(9)
+#define RT3883_INTC_INT_I2S BIT(10)
+#define RT3883_INTC_INT_UART1 BIT(12)
+#define RT3883_INTC_INT_UHST BIT(18)
+#define RT3883_INTC_INT_UDEV BIT(19)
+
+/* FLASH/SRAM/Codec Controller registers */
+#define RT3883_FSCC_REG_FLASH_CFG0 0x00
+#define RT3883_FSCC_REG_FLASH_CFG1 0x04
+#define RT3883_FSCC_REG_CODEC_CFG0 0x40
+#define RT3883_FSCC_REG_CODEC_CFG1 0x44
+
+#define RT3883_FLASH_CFG_WIDTH_SHIFT 26
+#define RT3883_FLASH_CFG_WIDTH_MASK 0x3
+#define RT3883_FLASH_CFG_WIDTH_8BIT 0x0
+#define RT3883_FLASH_CFG_WIDTH_16BIT 0x1
+#define RT3883_FLASH_CFG_WIDTH_32BIT 0x2
+
+
+/* UART registers */
+#define RT3883_UART_REG_RX 0
+#define RT3883_UART_REG_TX 1
+#define RT3883_UART_REG_IER 2
+#define RT3883_UART_REG_IIR 3
+#define RT3883_UART_REG_FCR 4
+#define RT3883_UART_REG_LCR 5
+#define RT3883_UART_REG_MCR 6
+#define RT3883_UART_REG_LSR 7
+
+#endif /* _RT3883_REGS_H_ */
bool "RT305x"
select SOC_RT305X
+ config RALINK_RT3883
+ bool "RT3883"
+ select SOC_RT3883
+
endchoice
source "arch/mips/ralink/rt288x/Kconfig"
source "arch/mips/ralink/rt305x/Kconfig"
+source "arch/mips/ralink/rt3883/Kconfig"
config SOC_RT288X
bool
select MIPS_MACHINE
select USB_ARCH_HAS_HCD
+config SOC_RT3883
+ bool
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select ARCH_REQUIRE_GPIOLIB
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
+ select MIPS_MACHINE
+ select USB_ARCH_HAS_OHCI
+ select USB_ARCH_HAS_EHCI
+
config RALINK_DEV_GPIO_BUTTONS
def_bool n
core-$(CONFIG_RALINK_RT305X) += arch/mips/ralink/rt305x/
cflags-$(CONFIG_RALINK_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
load-$(CONFIG_RALINK_RT305X) += 0xffffffff80000000
+
+#
+# Ralink RT3883
+#
+core-$(CONFIG_RALINK_RT3883) += arch/mips/ralink/rt3883/
+cflags-$(CONFIG_RALINK_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883
+load-$(CONFIG_RALINK_RT3883) += 0xffffffff80000000
--- /dev/null
+if RALINK_RT3883
+
+menu "Ralink RT3662/RT3883 machine selection"
+
+endmenu
+
+endif
--- /dev/null
+#
+# Makefile for the Ralink RT3662/RT3883 SoC specific parts of the kernel
+#
+# Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.
+
+obj-y := irq.o setup.o devices.o rt3883.o clock.o
+
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
--- /dev/null
+/*
+ * Ralink RT3662/RT3883 clock API
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/mach-ralink/common.h>
+#include <asm/mach-ralink/rt3883.h>
+#include <asm/mach-ralink/rt3883_regs.h>
+#include "common.h"
+
+struct clk {
+ unsigned long rate;
+};
+
+static struct clk rt3883_cpu_clk;
+static struct clk rt3883_sys_clk;
+static struct clk rt3883_wdt_clk;
+static struct clk rt3883_uart_clk;
+
+void __init rt3883_clocks_init(void)
+{
+ u32 syscfg0;
+ u32 clksel;
+ u32 ddr2;
+
+ syscfg0 = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG0);
+ clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) &
+ RT3883_SYSCFG0_CPUCLK_MASK);
+ ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2;
+
+ switch (clksel) {
+ case RT3883_SYSCFG0_CPUCLK_250:
+ rt3883_cpu_clk.rate = 250000000;
+ rt3883_sys_clk.rate = (ddr2) ? 125000000 : 83000000;
+ break;
+ case RT3883_SYSCFG0_CPUCLK_384:
+ rt3883_cpu_clk.rate = 384000000;
+ rt3883_sys_clk.rate = (ddr2) ? 128000000 : 96000000;
+ break;
+ case RT3883_SYSCFG0_CPUCLK_480:
+ rt3883_cpu_clk.rate = 480000000;
+ rt3883_sys_clk.rate = (ddr2) ? 160000000 : 120000000;
+ break;
+ case RT3883_SYSCFG0_CPUCLK_500:
+ rt3883_cpu_clk.rate = 500000000;
+ rt3883_sys_clk.rate = (ddr2) ? 166000000 : 125000000;
+ break;
+ }
+
+ rt3883_wdt_clk.rate = rt3883_sys_clk.rate;
+ rt3883_uart_clk.rate = 40000000;
+}
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ if (!strcmp(id, "sys"))
+ return &rt3883_sys_clk;
+
+ if (!strcmp(id, "cpu"))
+ return &rt3883_cpu_clk;
+
+ if (!strcmp(id, "wdt"))
+ return &rt3883_wdt_clk;
+
+ if (!strcmp(id, "uart"))
+ return &rt3883_uart_clk;
+
+ return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
--- /dev/null
+/*
+ * Ralink RT3662/RT3883 SoC common defines
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RT3883_COMMON_H
+#define _RT3883_COMMON_H
+
+void rt3883_clocks_init(void);
+
+#endif /* _RT3883_COMMON_H */
\ No newline at end of file
--- /dev/null
+/*
+ * Ralink RT3662/RT3883 SoC platform device registration
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/rt2x00_platform.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/mach-ralink/rt3883.h>
+#include <asm/mach-ralink/rt3883_regs.h>
+#include <asm/mach-ralink/rt3883_ehci_platform.h>
+#include <asm/mach-ralink/rt3883_ohci_platform.h>
+#include <asm/mach-ralink/ramips_nand_platform.h>
+#include "devices.h"
+
+#include <ramips_eth_platform.h>
+
+static struct resource rt3883_flash0_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = RT3883_BOOT_BASE,
+ .end = RT3883_BOOT_BASE + RT3883_BOOT_SIZE - 1,
+ },
+};
+
+struct physmap_flash_data rt3883_flash0_data;
+static struct platform_device rt3883_flash0_device = {
+ .name = "physmap-flash",
+ .resource = rt3883_flash0_resources,
+ .num_resources = ARRAY_SIZE(rt3883_flash0_resources),
+ .dev = {
+ .platform_data = &rt3883_flash0_data,
+ },
+};
+
+static struct resource rt3883_flash1_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = RT3883_SRAM_BASE,
+ .end = RT3883_SRAM_BASE + RT3883_SRAM_SIZE - 1,
+ },
+};
+
+struct physmap_flash_data rt3883_flash1_data;
+static struct platform_device rt3883_flash1_device = {
+ .name = "physmap-flash",
+ .resource = rt3883_flash1_resources,
+ .num_resources = ARRAY_SIZE(rt3883_flash1_resources),
+ .dev = {
+ .platform_data = &rt3883_flash1_data,
+ },
+};
+
+static int rt3883_flash_instance __initdata;
+void __init rt3883_register_pflash(unsigned int id)
+{
+ struct platform_device *pdev;
+ struct physmap_flash_data *pdata;
+ void __iomem *fscc_base;
+ u32 t;
+ int reg;
+
+ switch (id) {
+ case 0:
+ pdev = &rt3883_flash0_device;
+ reg = RT3883_FSCC_REG_FLASH_CFG0;
+ break;
+ case 1:
+ pdev = &rt3883_flash1_device;
+ reg = RT3883_FSCC_REG_FLASH_CFG1;
+ break;
+ default:
+ return;
+ }
+
+ pdata = pdev->dev.platform_data;
+
+ fscc_base = ioremap(RT3883_FSCC_BASE, RT3883_FSCC_SIZE);
+ if (!fscc_base)
+ panic("RT3883: ioremap failed for FSCC");
+
+ t = __raw_readl(fscc_base + reg);
+ iounmap(fscc_base);
+
+ t = (t >> RT3883_FLASH_CFG_WIDTH_SHIFT) & RT3883_FLASH_CFG_WIDTH_MASK;
+ switch (t) {
+ case RT3883_FLASH_CFG_WIDTH_8BIT:
+ pdata->width = 1;
+ break;
+ case RT3883_FLASH_CFG_WIDTH_16BIT:
+ pdata->width = 2;
+ break;
+ case RT3883_FLASH_CFG_WIDTH_32BIT:
+ if (id == 1) {
+ pdata->width = 4;
+ break;
+ }
+ /* fallthrough */
+ default:
+ pr_warn("RT3883: flash bank%d: invalid width detected\n", id);
+ return;
+ }
+
+ pdev->id = rt3883_flash_instance;
+
+ platform_device_register(pdev);
+ rt3883_flash_instance++;
+}
+
+static atomic_t rt3883_usb_use_count = ATOMIC_INIT(0);
+
+static void rt3883_usb_host_start(void)
+{
+ u32 t;
+
+ if (atomic_inc_return(&rt3883_usb_use_count) != 1)
+ return;
+
+ t = rt3883_sysc_rr(RT3883_SYSC_REG_USB_PS);
+
+#if 0
+ /* put the HOST controller into reset */
+ t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL);
+ t |= RT3883_RSTCTRL_UHST;
+ rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL);
+#endif
+
+ /* enable clock for port0's and port1's phys */
+ t = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1);
+ t = t | RT3883_CLKCFG1_UPHY0_CLK_EN | RT3883_CLKCFG1_UPHY1_CLK_EN;
+ rt3883_sysc_wr(t, RT3883_SYSC_REG_CLKCFG1);
+ mdelay(500);
+
+ /* pull USBHOST and USBDEV out from reset */
+ t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL);
+ t &= ~(RT3883_RSTCTRL_UHST | RT3883_RSTCTRL_UDEV);
+ rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL);
+ mdelay(500);
+
+ /* enable host mode */
+ t = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1);
+ t |= RT3883_SYSCFG1_USB0_HOST_MODE;
+ rt3883_sysc_wr(t, RT3883_SYSC_REG_SYSCFG1);
+
+ t = rt3883_sysc_rr(RT3883_SYSC_REG_USB_PS);
+}
+
+static void rt3883_usb_host_stop(void)
+{
+ u32 t;
+
+ if (atomic_dec_return(&rt3883_usb_use_count) != 0)
+ return;
+
+ /* put USBHOST and USBDEV into reset */
+ t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL);
+ t |= RT3883_RSTCTRL_UHST | RT3883_RSTCTRL_UDEV;
+ rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL);
+ udelay(10000);
+
+ /* disable clock for port0's and port1's phys*/
+ t = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1);
+ t &= ~(RT3883_CLKCFG1_UPHY0_CLK_EN | RT3883_CLKCFG1_UPHY1_CLK_EN);
+ rt3883_sysc_wr(t, RT3883_SYSC_REG_CLKCFG1);
+ udelay(10000);
+}
+
+static struct rt3883_ehci_platform_data rt3883_ehci_data = {
+ .start_hw = rt3883_usb_host_start,
+ .stop_hw = rt3883_usb_host_stop,
+};
+
+static struct resource rt3883_ehci_resources[] = {
+ {
+ .start = RT3883_EHCI_BASE,
+ .end = RT3883_EHCI_BASE + PAGE_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = RT3883_INTC_IRQ_UHST,
+ .end = RT3883_INTC_IRQ_UHST,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 rt3883_ehci_dmamask = DMA_BIT_MASK(32);
+static struct platform_device rt3883_ehci_device = {
+ .name = "rt3883-ehci",
+ .id = -1,
+ .resource = rt3883_ehci_resources,
+ .num_resources = ARRAY_SIZE(rt3883_ehci_resources),
+ .dev = {
+ .dma_mask = &rt3883_ehci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &rt3883_ehci_data,
+ },
+};
+
+static struct resource rt3883_ohci_resources[] = {
+ {
+ .start = RT3883_OHCI_BASE,
+ .end = RT3883_OHCI_BASE + PAGE_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = RT3883_INTC_IRQ_UHST,
+ .end = RT3883_INTC_IRQ_UHST,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct rt3883_ohci_platform_data rt3883_ohci_data = {
+ .start_hw = rt3883_usb_host_start,
+ .stop_hw = rt3883_usb_host_stop,
+};
+
+static u64 rt3883_ohci_dmamask = DMA_BIT_MASK(32);
+static struct platform_device rt3883_ohci_device = {
+ .name = "rt3883-ohci",
+ .id = -1,
+ .resource = rt3883_ohci_resources,
+ .num_resources = ARRAY_SIZE(rt3883_ohci_resources),
+ .dev = {
+ .dma_mask = &rt3883_ohci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &rt3883_ohci_data,
+ },
+};
+
+void __init rt3883_register_usbhost(void)
+{
+ platform_device_register(&rt3883_ehci_device);
+ platform_device_register(&rt3883_ohci_device);
+}
+
+static void rt3883_fe_reset(void)
+{
+ u32 t;
+
+ t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL);
+ t |= RT3883_RSTCTRL_FE;
+ rt3883_sysc_wr(t , RT3883_SYSC_REG_RSTCTRL);
+
+ t &= ~RT3883_RSTCTRL_FE;
+ rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL);
+}
+
+static struct resource rt3883_eth_resources[] = {
+ {
+ .start = RT3883_FE_BASE,
+ .end = RT3883_FE_BASE + PAGE_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = RT3883_CPU_IRQ_FE,
+ .end = RT3883_CPU_IRQ_FE,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct ramips_eth_platform_data rt3883_eth_data = {
+ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
+ .reset_fe = rt3883_fe_reset,
+ .min_pkt_len = 64,
+};
+
+static struct platform_device rt3883_eth_device = {
+ .name = "ramips_eth",
+ .resource = rt3883_eth_resources,
+ .num_resources = ARRAY_SIZE(rt3883_eth_resources),
+ .dev = {
+ .platform_data = &rt3883_eth_data,
+ }
+};
+
+void __init rt3883_register_ethernet(void)
+{
+ struct clk *clk;
+
+ clk = clk_get(NULL, "sys");
+ if (IS_ERR(clk))
+ panic("unable to get SYS clock, err=%ld", PTR_ERR(clk));
+
+ rt3883_eth_data.sys_freq = clk_get_rate(clk);
+
+ platform_device_register(&rt3883_eth_device);
+}
+
+static struct resource rt3883_wlan_resources[] = {
+ {
+ .start = RT3883_WLAN_BASE,
+ .end = RT3883_WLAN_BASE + 0x3FFFF,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = RT3883_CPU_IRQ_WLAN,
+ .end = RT3883_CPU_IRQ_WLAN,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct rt2x00_platform_data rt3883_wlan_data = {
+ .eeprom_file_name = "rt3883.eeprom",
+};
+
+static struct platform_device rt3883_wlan_device = {
+ .name = "rt2800_wmac",
+ .resource = rt3883_wlan_resources,
+ .num_resources = ARRAY_SIZE(rt3883_wlan_resources),
+ .dev = {
+ .platform_data = &rt3883_wlan_data,
+ }
+};
+
+void __init rt3883_register_wlan(void)
+{
+ platform_device_register(&rt3883_wlan_device);
+}
+
+static struct resource rt3883_wdt_resources[] = {
+ {
+ .start = RT3883_TIMER_BASE,
+ .end = RT3883_TIMER_BASE + RT3883_TIMER_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device rt3883_wdt_device = {
+ .name = "ramips-wdt",
+ .id = -1,
+ .resource = rt3883_wdt_resources,
+ .num_resources = ARRAY_SIZE(rt3883_wdt_resources),
+};
+
+void __init rt3883_register_wdt(bool enable_reset)
+{
+ if (enable_reset) {
+ u32 t;
+
+ /* enable WDT reset output on GPIO 2 */
+ t = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1);
+ t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT;
+ rt3883_sysc_wr(t, RT3883_SYSC_REG_SYSCFG1);
+ }
+
+ platform_device_register(&rt3883_wdt_device);
+}
+
+static struct resource rt3883_nand_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = RT3883_NANDC_BASE,
+ .end = RT3883_NANDC_BASE + RT3883_NANDC_SIZE - 1,
+ },
+};
+
+static struct ramips_nand_platform_data rt3883_nand_data;
+
+static struct platform_device rt3883_nand_device = {
+ .name = RAMIPS_NAND_DRIVER_NAME,
+ .id = -1,
+ .resource = rt3883_nand_resources,
+ .num_resources = ARRAY_SIZE(rt3883_nand_resources),
+ .dev = {
+ .platform_data = &rt3883_nand_data,
+ },
+};
+
+void __init rt3883_register_nand(struct mtd_partition *parts, int nr_parts)
+{
+ rt3883_nand_data.parts = parts;
+ rt3883_nand_data.nr_parts = nr_parts;
+ platform_device_register(&rt3883_nand_device);
+}
--- /dev/null
+/*
+ * Ralink RT3662/3883 SoC specific platform device definitions
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RT3883_DEVICES_H
+#define _RT3883_DEVICES_H
+
+struct physmap_flash_data;
+
+extern struct physmap_flash_data rt3883_flash0_data;
+extern struct physmap_flash_data rt3883_flash1_data;
+void rt3883_register_pflash(unsigned int id);
+
+struct mtd_partition;
+void rt3883_register_nand(struct mtd_partition *parts, int nr_parts);
+
+extern struct ramips_eth_platform_data rt3883_eth_data;
+void rt3883_register_ethernet(void);
+void rt3883_register_usbhost(void);
+void rt3883_register_wlan(void);
+void rt3883_register_wdt(bool enable_reset);
+
+#endif /* _RT3883_DEVICES_H */
--- /dev/null
+/*
+ * Ralink RT3662/RT3883 SoC early printk support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/serial_reg.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/mach-ralink/rt3883_regs.h>
+
+#define UART_READ(r) \
+ __raw_readl((void __iomem *)(KSEG1ADDR(RT3883_UART1_BASE) + 4 * (r)))
+
+#define UART_WRITE(r, v) \
+ __raw_writel((v), (void __iomem *)(KSEG1ADDR(RT3883_UART1_BASE) + 4 * (r)))
+
+void prom_putchar(unsigned char ch)
+{
+ while (((UART_READ(RT3883_UART_REG_LSR)) & UART_LSR_THRE) == 0);
+ UART_WRITE(RT3883_UART_REG_TX, ch);
+ while (((UART_READ(RT3883_UART_REG_LSR)) & UART_LSR_THRE) == 0);
+}
--- /dev/null
+/*
+ * Ralink RT3662/RT3883 SoC specific interrupt handling
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+
+#include <asm/mach-ralink/common.h>
+#include <asm/mach-ralink/rt3883.h>
+#include <asm/mach-ralink/rt3883_regs.h>
+
+static void rt3883_intc_irq_dispatch(void)
+{
+ u32 pending;
+
+ pending = ramips_intc_get_status();
+
+ if (pending & RT3883_INTC_INT_TIMER0)
+ do_IRQ(RT3883_INTC_IRQ_TIMER0);
+
+ else if (pending & RT3883_INTC_INT_TIMER1)
+ do_IRQ(RT3883_INTC_IRQ_TIMER1);
+
+ else if (pending & RT3883_INTC_INT_UART0)
+ do_IRQ(RT3883_INTC_IRQ_UART0);
+
+ else if (pending & RT3883_INTC_INT_UART1)
+ do_IRQ(RT3883_INTC_IRQ_UART1);
+
+ else if (pending & RT3883_INTC_INT_PERFC)
+ do_IRQ(RT3883_INTC_IRQ_PERFC);
+
+ else if (pending & RT3883_INTC_INT_UHST)
+ do_IRQ(RT3883_INTC_IRQ_UHST);
+
+ /* TODO: handle PIO interrupts as well */
+
+ else
+ spurious_interrupt();
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned long pending;
+
+ pending = read_c0_status() & read_c0_cause() & ST0_IM;
+
+ if (pending & STATUSF_IP7)
+ do_IRQ(RT3883_CPU_IRQ_COUNTER);
+
+ else if (pending & STATUSF_IP5)
+ do_IRQ(RT3883_CPU_IRQ_FE);
+
+ else if (pending & STATUSF_IP6)
+ do_IRQ(RT3883_CPU_IRQ_WLAN);
+
+ else if (pending & STATUSF_IP4)
+ do_IRQ(RT3883_CPU_IRQ_PCI);
+
+ else if (pending & STATUSF_IP2)
+ rt3883_intc_irq_dispatch();
+
+ else
+ spurious_interrupt();
+}
+
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init();
+ ramips_intc_irq_init(RT3883_INTC_BASE, RT3883_CPU_IRQ_INTC,
+ RT3883_INTC_IRQ_BASE);
+ cp0_perfcount_irq = RT3883_INTC_IRQ_PERFC;
+}
--- /dev/null
+/*
+ * Ralink RT3662/RT3883 SoC specific setup
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mach-ralink/common.h>
+#include <asm/mach-ralink/ramips_gpio.h>
+#include <asm/mach-ralink/rt3883.h>
+#include <asm/mach-ralink/rt3883_regs.h>
+
+void __iomem * rt3883_sysc_base;
+void __iomem * rt3883_memc_base;
+
+void __init rt3883_detect_sys_type(void)
+{
+ u32 n0;
+ u32 n1;
+ u32 id;
+
+ n0 = rt3883_sysc_rr(RT3883_SYSC_REG_CHIPID0_3);
+ n1 = rt3883_sysc_rr(RT3883_SYSC_REG_CHIPID4_7);
+ id = rt3883_sysc_rr(RT3883_SYSC_REG_REVID);
+
+ snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN,
+ "Ralink %c%c%c%c%c%c%c%c ver:%u eco:%u",
+ (char) (n0 & 0xff), (char) ((n0 >> 8) & 0xff),
+ (char) ((n0 >> 16) & 0xff), (char) ((n0 >> 24) & 0xff),
+ (char) (n1 & 0xff), (char) ((n1 >> 8) & 0xff),
+ (char) ((n1 >> 16) & 0xff), (char) ((n1 >> 24) & 0xff),
+ (id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
+ (id & RT3883_REVID_ECO_ID_MASK));
+}
+
+static struct ramips_gpio_chip rt3883_gpio_chips[] = {
+ {
+ .chip = {
+ .label = "RT3883-GPIO0",
+ .base = 0,
+ .ngpio = 24,
+ },
+ .regs = {
+ [RAMIPS_GPIO_REG_INT] = 0x00,
+ [RAMIPS_GPIO_REG_EDGE] = 0x04,
+ [RAMIPS_GPIO_REG_RENA] = 0x08,
+ [RAMIPS_GPIO_REG_FENA] = 0x0c,
+ [RAMIPS_GPIO_REG_DATA] = 0x20,
+ [RAMIPS_GPIO_REG_DIR] = 0x24,
+ [RAMIPS_GPIO_REG_POL] = 0x28,
+ [RAMIPS_GPIO_REG_SET] = 0x2c,
+ [RAMIPS_GPIO_REG_RESET] = 0x30,
+ [RAMIPS_GPIO_REG_TOGGLE] = 0x34,
+ },
+ .map_base = RT3883_PIO_BASE,
+ .map_size = RT3883_PIO_SIZE,
+ },
+ {
+ .chip = {
+ .label = "RT3883-GPIO1",
+ .base = 24,
+ .ngpio = 16,
+ },
+ .regs = {
+ [RAMIPS_GPIO_REG_INT] = 0x38,
+ [RAMIPS_GPIO_REG_EDGE] = 0x3c,
+ [RAMIPS_GPIO_REG_RENA] = 0x40,
+ [RAMIPS_GPIO_REG_FENA] = 0x44,
+ [RAMIPS_GPIO_REG_DATA] = 0x48,
+ [RAMIPS_GPIO_REG_DIR] = 0x4c,
+ [RAMIPS_GPIO_REG_POL] = 0x50,
+ [RAMIPS_GPIO_REG_SET] = 0x54,
+ [RAMIPS_GPIO_REG_RESET] = 0x58,
+ [RAMIPS_GPIO_REG_TOGGLE] = 0x5c,
+ },
+ .map_base = RT3883_PIO_BASE,
+ .map_size = RT3883_PIO_SIZE,
+ },
+ {
+ .chip = {
+ .label = "RT3883-GPIO2",
+ .base = 40,
+ .ngpio = 32,
+ },
+ .regs = {
+ [RAMIPS_GPIO_REG_INT] = 0x60,
+ [RAMIPS_GPIO_REG_EDGE] = 0x64,
+ [RAMIPS_GPIO_REG_RENA] = 0x68,
+ [RAMIPS_GPIO_REG_FENA] = 0x6c,
+ [RAMIPS_GPIO_REG_DATA] = 0x70,
+ [RAMIPS_GPIO_REG_DIR] = 0x74,
+ [RAMIPS_GPIO_REG_POL] = 0x78,
+ [RAMIPS_GPIO_REG_SET] = 0x7c,
+ [RAMIPS_GPIO_REG_RESET] = 0x80,
+ [RAMIPS_GPIO_REG_TOGGLE] = 0x84,
+ },
+ .map_base = RT3883_PIO_BASE,
+ .map_size = RT3883_PIO_SIZE,
+ },
+ {
+ .chip = {
+ .label = "RT3883-GPIO3",
+ .base = 72,
+ .ngpio = 24,
+ },
+ .regs = {
+ [RAMIPS_GPIO_REG_INT] = 0x88,
+ [RAMIPS_GPIO_REG_EDGE] = 0x8c,
+ [RAMIPS_GPIO_REG_RENA] = 0x90,
+ [RAMIPS_GPIO_REG_FENA] = 0x94,
+ [RAMIPS_GPIO_REG_DATA] = 0x98,
+ [RAMIPS_GPIO_REG_DIR] = 0x9c,
+ [RAMIPS_GPIO_REG_POL] = 0xa0,
+ [RAMIPS_GPIO_REG_SET] = 0xa4,
+ [RAMIPS_GPIO_REG_RESET] = 0xa8,
+ [RAMIPS_GPIO_REG_TOGGLE] = 0xac,
+ },
+ .map_base = RT3883_PIO_BASE,
+ .map_size = RT3883_PIO_SIZE,
+ },
+};
+
+static struct ramips_gpio_data rt3883_gpio_data = {
+ .chips = rt3883_gpio_chips,
+ .num_chips = ARRAY_SIZE(rt3883_gpio_chips),
+};
+
+static void rt3883_gpio_reserve(int first, int last)
+{
+ for (; first <= last; first++)
+ gpio_request(first, "reserved");
+}
+
+void __init rt3883_gpio_init(u32 mode)
+{
+ u32 t;
+
+ rt3883_sysc_wr(mode, RT3883_SYSC_REG_GPIO_MODE);
+
+ ramips_gpio_init(&rt3883_gpio_data);
+ if ((mode & RT3883_GPIO_MODE_I2C) == 0)
+ rt3883_gpio_reserve(RT3883_GPIO_I2C_SD, RT3883_GPIO_I2C_SCLK);
+
+ if ((mode & RT3883_GPIO_MODE_SPI) == 0)
+ rt3883_gpio_reserve(RT3883_GPIO_SPI_CS0, RT3883_GPIO_SPI_CLK);
+
+ t = mode >> RT3883_GPIO_MODE_UART0_SHIFT;
+ t &= RT3883_GPIO_MODE_UART0_MASK;
+ switch (t) {
+ case RT3883_GPIO_MODE_UARTF:
+ case RT3883_GPIO_MODE_PCM_UARTF:
+ case RT3883_GPIO_MODE_PCM_I2S:
+ case RT3883_GPIO_MODE_I2S_UARTF:
+ rt3883_gpio_reserve(RT3883_GPIO_7, RT3883_GPIO_14);
+ break;
+ case RT3883_GPIO_MODE_PCM_GPIO:
+ rt3883_gpio_reserve(RT3883_GPIO_11, RT3883_GPIO_14);
+ break;
+ case RT3883_GPIO_MODE_GPIO_UARTF:
+ case RT3883_GPIO_MODE_GPIO_I2S:
+ rt3883_gpio_reserve(RT3883_GPIO_7, RT3883_GPIO_10);
+ break;
+ }
+
+ if ((mode & RT3883_GPIO_MODE_UART1) == 0)
+ rt3883_gpio_reserve(RT3883_GPIO_UART1_TXD,
+ RT3883_GPIO_UART1_RXD);
+
+ if ((mode & RT3883_GPIO_MODE_JTAG) == 0)
+ rt3883_gpio_reserve(RT3883_GPIO_JTAG_TDO,
+ RT3883_GPIO_JTAG_TCLK);
+
+ if ((mode & RT3883_GPIO_MODE_MDIO) == 0)
+ rt3883_gpio_reserve(RT3883_GPIO_MDIO_MDC,
+ RT3883_GPIO_MDIO_MDIO);
+
+ if ((mode & RT3883_GPIO_MODE_GE1) == 0)
+ rt3883_gpio_reserve(RT3883_GPIO_GE1_TXD0,
+ RT3883_GPIO_GE1_RXCLK);
+
+ if ((mode & RT3883_GPIO_MODE_GE2) == 0)
+ rt3883_gpio_reserve(RT3883_GPIO_GE2_TXD0,
+ RT3883_GPIO_GE2_RXCLK);
+
+ t = mode >> RT3883_GPIO_MODE_PCI_SHIFT;
+ t &= RT3883_GPIO_MODE_PCI_MASK;
+ if (t != RT3883_GPIO_MODE_PCI_GPIO)
+ rt3883_gpio_reserve(RT3883_GPIO_PCI_AD0,
+ RT3883_GPIO_PCI_AD31);
+
+ t = mode >> RT3883_GPIO_MODE_LNA_A_SHIFT;
+ t &= RT3883_GPIO_MODE_LNA_A_MASK;
+ if (t != RT3883_GPIO_MODE_LNA_A_GPIO)
+ rt3883_gpio_reserve(RT3883_GPIO_LNA_PE_A0,
+ RT3883_GPIO_LNA_PE_A2);
+
+ t = mode >> RT3883_GPIO_MODE_LNA_G_SHIFT;
+ t &= RT3883_GPIO_MODE_LNA_G_MASK;
+ if (t != RT3883_GPIO_MODE_LNA_G_GPIO)
+ rt3883_gpio_reserve(RT3883_GPIO_LNA_PE_G0,
+ RT3883_GPIO_LNA_PE_G2);
+}
--- /dev/null
+/*
+ * Ralink RT3662/RT3883 SoC specific setup
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/mips_machine.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+
+#include <asm/mach-ralink/common.h>
+#include <asm/mach-ralink/rt3883.h>
+#include <asm/mach-ralink/rt3883_regs.h>
+#include "common.h"
+
+static void rt3883_restart(char *command)
+{
+ rt3883_sysc_wr(RT3883_RSTCTRL_SYS, RT3883_SYSC_REG_RSTCTRL);
+ while (1)
+ if (cpu_wait)
+ cpu_wait();
+}
+
+static void rt3883_halt(void)
+{
+ while (1)
+ if (cpu_wait)
+ cpu_wait();
+}
+
+unsigned int __cpuinit get_c0_compare_irq(void)
+{
+ return CP0_LEGACY_COMPARE_IRQ;
+}
+
+void __init ramips_soc_setup(void)
+{
+ struct clk *clk;
+
+ rt3883_sysc_base = ioremap_nocache(RT3883_SYSC_BASE, PAGE_SIZE);
+ rt3883_memc_base = ioremap_nocache(RT3883_MEMC_BASE, PAGE_SIZE);
+
+ rt3883_detect_sys_type();
+ rt3883_clocks_init();
+
+ clk = clk_get(NULL, "cpu");
+ if (IS_ERR(clk))
+ panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
+
+ printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type,
+ clk_get_rate(clk) / 1000000,
+ (clk_get_rate(clk) % 1000000) * 100 / 1000000);
+
+ _machine_restart = rt3883_restart;
+ _machine_halt = rt3883_halt;
+ pm_power_off = rt3883_halt;
+
+ clk = clk_get(NULL, "uart");
+ if (IS_ERR(clk))
+ panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
+
+ ramips_early_serial_setup(0, RT3883_UART0_BASE, clk_get_rate(clk),
+ RT3883_INTC_IRQ_UART0);
+ ramips_early_serial_setup(1, RT3883_UART1_BASE, clk_get_rate(clk),
+ RT3883_INTC_IRQ_UART1);
+}
+
+void __init plat_time_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_get(NULL, "cpu");
+ if (IS_ERR(clk))
+ panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
+
+ mips_hpt_frequency = clk_get_rate(clk) / 2;
+}
--- /dev/null
+/*
+ * Bus Glue for the built-in EHCI controller of the Ralink RT3662/RT3883 SoCs
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach-ralink/rt3883.h>
+#include <asm/mach-ralink/rt3883_ehci_platform.h>
+
+static int ehci_rt3883_init(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int ret;
+
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs +
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+ dbg_hcs_params(ehci, "reset");
+ dbg_hcc_params(ehci, "reset");
+
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+ ehci->sbrn = 0x20;
+
+ ehci_reset(ehci);
+
+ ret = ehci_init(hcd);
+ if (ret)
+ return ret;
+
+ ehci_port_power(ehci, 0);
+
+ return 0;
+}
+
+static const struct hc_driver ehci_rt3883_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "Ralink RT3883 built-in EHCI controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ .reset = ehci_rt3883_init,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+
+ .get_frame_number = ehci_get_frame,
+
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_rt3883_probe(struct platform_device *pdev)
+{
+ struct rt3883_ehci_platform_data *pdata;
+ struct usb_hcd *hcd;
+ struct resource *res;
+ int irq;
+ int ret;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_dbg(&pdev->dev, "no IRQ specified for %s\n",
+ dev_name(&pdev->dev));
+ return -ENODEV;
+ }
+ irq = res->start;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_dbg(&pdev->dev, "no base address specified for %s\n",
+ dev_name(&pdev->dev));
+ return -ENODEV;
+ }
+
+ hcd = usb_create_hcd(&ehci_rt3883_hc_driver, &pdev->dev,
+ dev_name(&pdev->dev));
+ if (!hcd)
+ return -ENOMEM;
+
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = res->end - res->start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ dev_dbg(&pdev->dev, "controller already in use\n");
+ ret = -EBUSY;
+ goto err_put_hcd;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ dev_dbg(&pdev->dev, "error mapping memory\n");
+ ret = -EFAULT;
+ goto err_release_region;
+ }
+
+ pdata = pdev->dev.platform_data;
+ if (pdata && pdata->start_hw)
+ pdata->start_hw();
+
+ ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (ret)
+ goto err_iounmap;
+
+ return 0;
+
+err_iounmap:
+ iounmap(hcd->regs);
+
+err_release_region:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_put_hcd:
+ usb_put_hcd(hcd);
+ return ret;
+}
+
+static int ehci_rt3883_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct rt3883_ehci_platform_data *pdata;
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+
+ pdata = pdev->dev.platform_data;
+ if (pdata && pdata->stop_hw)
+ pdata->stop_hw();
+
+ return 0;
+}
+
+static struct platform_driver ehci_rt3883_driver = {
+ .probe = ehci_rt3883_probe,
+ .remove = ehci_rt3883_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "rt3883-ehci",
+ }
+};
+
+MODULE_ALIAS("platform:rt3883-ehci");
--- /dev/null
+/*
+ * Bus Glue for the built-in OHCI controller of the Ralink RT3662/RT3883 SoCs
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach-ralink/rt3883.h>
+#include <asm/mach-ralink/rt3883_ohci_platform.h>
+
+static int __devinit ohci_rt3883_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int ret;
+
+ ret = ohci_init(ohci);
+ if (ret < 0)
+ return ret;
+
+ ret = ohci_run(ohci);
+ if (ret < 0)
+ goto err;
+
+ return 0;
+
+err:
+ ohci_stop(hcd);
+ return ret;
+}
+
+static const struct hc_driver ohci_rt3883_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "Ralink RT3883 built-in OHCI controller",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ .start = ohci_rt3883_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ohci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+ .start_port_reset = ohci_start_port_reset,
+};
+
+static int ohci_rt3883_probe(struct platform_device *pdev)
+{
+ struct rt3883_ohci_platform_data *pdata;
+ struct usb_hcd *hcd;
+ struct resource *res;
+ int irq;
+ int ret;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_dbg(&pdev->dev, "no IRQ specified for %s\n",
+ dev_name(&pdev->dev));
+ return -ENODEV;
+ }
+ irq = res->start;
+
+ hcd = usb_create_hcd(&ohci_rt3883_hc_driver,
+ &pdev->dev, dev_name(&pdev->dev));
+ if (!hcd)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_dbg(&pdev->dev, "no base address specified for %s\n",
+ dev_name(&pdev->dev));
+ ret = -ENODEV;
+ goto err_put_hcd;
+ }
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = res->end - res->start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ dev_dbg(&pdev->dev, "controller already in use\n");
+ ret = -EBUSY;
+ goto err_put_hcd;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ dev_dbg(&pdev->dev, "error mapping memory\n");
+ ret = -EFAULT;
+ goto err_release_region;
+ }
+
+ pdata = pdev->dev.platform_data;
+ if (pdata && pdata->start_hw)
+ pdata->start_hw();
+
+ ohci_hcd_init(hcd_to_ohci(hcd));
+
+ ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (ret)
+ goto err_stop_hcd;
+
+ return 0;
+
+err_stop_hcd:
+ iounmap(hcd->regs);
+err_release_region:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_put_hcd:
+ usb_put_hcd(hcd);
+ return ret;
+}
+
+static int ohci_rt3883_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct rt3883_ohci_platform_data *pdata;
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+
+ pdata = pdev->dev.platform_data;
+ if (pdata && pdata->stop_hw)
+ pdata->stop_hw();
+
+ return 0;
+}
+
+static struct platform_driver ohci_rt3883_driver = {
+ .probe = ohci_rt3883_probe,
+ .remove = ohci_rt3883_remove,
+ .shutdown = usb_hcd_platform_shutdown,
+ .driver = {
+ .name = "rt3883-ohci",
+ .owner = THIS_MODULE,
+ },
+};
+
+MODULE_ALIAS("platform:rt3883-ohci");
--- /dev/null
+From patchwork Tue Nov 8 14:59:01 2011
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: MIPS: Kernel hangs occasionally during boot.
+Date: Tue, 08 Nov 2011 13:59:01 -0000
+From: Al Cooper <alcooperx@gmail.com>
+X-Patchwork-Id: 2911
+Message-Id: <1320764341-4275-1-git-send-email-alcooperx@gmail.com>
+To: ralf@linux-mips.org, linux-mips@linux-mips.org,
+ linux-kernel@vger.kernel.org
+Cc: "Al Cooper" <alcooperx@gmail.com>
+
+The Kernel hangs occasionally during boot after
+"Calibrating delay loop..". This is caused by the
+c0_compare_int_usable() routine in cevt-r4k.c returning false which
+causes the system to disable the timer and hang later. The false
+return happens because the routine is using a series of four calls to
+irq_disable_hazard() as a delay while it waits for the timer changes
+to propagate to the cp0 cause register. On newer MIPS cores, like the 74K,
+the series of irq_disable_hazard() calls turn into ehb instructions and
+can take as little as a few clock ticks for all 4 instructions. This
+is not enough of a delay, so the routine thinks the timer is not working.
+This fix uses up to a max number of cycle counter ticks for the delay
+and uses back_to_back_c0_hazard() instead of irq_disable_hazard() to
+handle the hazard condition between cp0 writes and cp0 reads.
+
+Signed-off-by: Al Cooper <alcooperx@gmail.com>
+
+---
+arch/mips/kernel/cevt-r4k.c | 38 +++++++++++++++++++-------------------
+ 1 files changed, 19 insertions(+), 19 deletions(-)
+
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -103,19 +103,10 @@ static int c0_compare_int_pending(void)
+
+ /*
+ * Compare interrupt can be routed and latched outside the core,
+- * so a single execution hazard barrier may not be enough to give
+- * it time to clear as seen in the Cause register. 4 time the
+- * pipeline depth seems reasonably conservative, and empirically
+- * works better in configurations with high CPU/bus clock ratios.
++ * so wait up to worst case number of cycle counter ticks for timer interrupt
++ * changes to propagate to the cause register.
+ */
+-
+-#define compare_change_hazard() \
+- do { \
+- irq_disable_hazard(); \
+- irq_disable_hazard(); \
+- irq_disable_hazard(); \
+- irq_disable_hazard(); \
+- } while (0)
++#define COMPARE_INT_SEEN_TICKS 50
+
+ int c0_compare_int_usable(void)
+ {
+@@ -126,8 +117,12 @@ int c0_compare_int_usable(void)
+ * IP7 already pending? Try to clear it by acking the timer.
+ */
+ if (c0_compare_int_pending()) {
+- write_c0_compare(read_c0_count());
+- compare_change_hazard();
++ cnt = read_c0_count();
++ write_c0_compare(cnt);
++ back_to_back_c0_hazard();
++ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
++ if (!c0_compare_int_pending())
++ break;
+ if (c0_compare_int_pending())
+ return 0;
+ }
+@@ -136,7 +131,7 @@ int c0_compare_int_usable(void)
+ cnt = read_c0_count();
+ cnt += delta;
+ write_c0_compare(cnt);
+- compare_change_hazard();
++ back_to_back_c0_hazard();
+ if ((int)(read_c0_count() - cnt) < 0)
+ break;
+ /* increase delta if the timer was already expired */
+@@ -145,12 +140,17 @@ int c0_compare_int_usable(void)
+ while ((int)(read_c0_count() - cnt) <= 0)
+ ; /* Wait for expiry */
+
+- compare_change_hazard();
++ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
++ if (c0_compare_int_pending())
++ break;
+ if (!c0_compare_int_pending())
+ return 0;
+-
+- write_c0_compare(read_c0_count());
+- compare_change_hazard();
++ cnt = read_c0_count();
++ write_c0_compare(cnt);
++ back_to_back_c0_hazard();
++ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
++ if (!c0_compare_int_pending())
++ break;
+ if (c0_compare_int_pending())
+ return 0;
+
cards. If unsure, say N.
+config SERIAL_8250_RT288X
-+ bool "Ralink RT288x/RT305x serial port support"
-+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X)
++ bool "Ralink RT288x/RT305x/RT3883 serial port support"
++ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
+ help
+ If you have a Ralink RT288x/RT305x SoC based board and want to use the
+ serial port, say Y to this option. The driver can handle up to 2 serial
+config RAMIPS_WDT
+ tristate "Ralink RT288X/RT305X Watchdog Timer"
-+ depends on SOC_RT288X || SOC_RT305X
++ depends on SOC_RT288X || SOC_RT305X || SOC_RT3883
+ help
+ Hardware driver for the built-in watchdog timer on the
+ Ralink RT288X/RT305X SoCs.
--- /dev/null
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -202,6 +202,15 @@ config USB_CNS3XXX_EHCI
+ It is needed for high-speed (480Mbit/sec) USB 2.0 device
+ support.
+
++config USB_EHCI_RT3883
++ bool "EHCI support for Ralink RT3662/RT3883 SoCs"
++ depends on USB_EHCI_HCD && SOC_RT3883
++ select USB_EHCI_ROOT_HUB_TT
++ default y
++ ---help---
++ Enables support for the built-in EHCI controller present
++ on the Ralink RT3883 SoC.
++
+ config USB_OXU210HP_HCD
+ tristate "OXU210HP HCD support"
+ depends on USB
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1267,6 +1267,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER tegra_ehci_driver
+ #endif
+
++#ifdef CONFIG_USB_EHCI_RT3883
++#include "ehci-rt3883.c"
++#define PLATFORM_DRIVER ehci_rt3883_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+ !defined(XILINX_OF_PLATFORM_DRIVER)
--- /dev/null
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -296,6 +296,14 @@ config USB_OHCI_HCD_OMAP3
+ Enables support for the on-chip OHCI controller on
+ OMAP3 and later chips.
+
++config USB_OHCI_RT3883
++ bool "USB OHCI support for the Ralink RT3883 SoCs"
++ depends on USB_OHCI_HCD && SOC_RT3883
++ default y
++ help
++ Enables support for the built-in OHCI controller present on the
++ Ralink RT3883 SoC.
++
+ config USB_OHCI_HCD_PPC_SOC
+ bool "OHCI support for on-chip PPC USB controller"
+ depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1107,6 +1107,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver
+ #endif
+
++#ifdef CONFIG_USB_OHCI_RT3883
++#include "ohci-rt3883.c"
++#define PLATFORM_DRIVER ohci_rt3883_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && \
+ !defined(PLATFORM_DRIVER) && \
+ !defined(OMAP1_PLATFORM_DRIVER) && \
cards. If unsure, say N.
+config SERIAL_8250_RT288X
-+ bool "Ralink RT288x/RT305x serial port support"
-+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X)
++ bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
++ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
+ help
+ If you have a Ralink RT288x/RT305x SoC based board and want to use the
+ serial port, say Y to this option. The driver can handle up to 2 serial
+config RAMIPS_WDT
+ tristate "Ralink RT288X/RT305X Watchdog Timer"
-+ depends on SOC_RT288X || SOC_RT305X
++ depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883)
+ help
+ Hardware driver for the built-in watchdog timer on the
+ Ralink RT288X/RT305X SoCs.
--- /dev/null
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -217,6 +217,15 @@ config USB_EHCI_ATH79
+ Enables support for the built-in EHCI controller present
+ on the Atheros AR7XXX/AR9XXX SoCs.
+
++config USB_EHCI_RT3883
++ bool "EHCI support for Ralink RT3662/RT3883 SoCs"
++ depends on USB_EHCI_HCD && SOC_RT3883
++ select USB_EHCI_ROOT_HUB_TT
++ default y
++ ---help---
++ Enables support for the built-in EHCI controller present
++ on the Ralink RT3883 SoC.
++
+ config USB_OXU210HP_HCD
+ tristate "OXU210HP HCD support"
+ depends on USB
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1329,6 +1329,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ehci_xls_driver
+ #endif
+
++#ifdef CONFIG_USB_EHCI_RT3883
++#include "ehci-rt3883.c"
++#define PLATFORM_DRIVER ehci_rt3883_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+ !defined(XILINX_OF_PLATFORM_DRIVER)
--- /dev/null
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -319,6 +319,14 @@ config USB_OHCI_ATH79
+ Enables support for the built-in OHCI controller present on the
+ Atheros AR71XX/AR7240 SoCs.
+
++config USB_OHCI_RT3883
++ bool "USB OHCI support for the Ralink RT3883 SoCs"
++ depends on USB_OHCI_HCD && SOC_RT3883
++ default y
++ help
++ Enables support for the built-in OHCI controller present on the
++ Ralink RT3883 SoC.
++
+ config USB_OHCI_HCD_PPC_SOC
+ bool "OHCI support for on-chip PPC USB controller"
+ depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1116,6 +1116,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ohci_xls_driver
+ #endif
+
++#ifdef CONFIG_USB_OHCI_RT3883
++#include "ohci-rt3883.c"
++#define PLATFORM_DRIVER ohci_rt3883_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && \
+ !defined(PLATFORM_DRIVER) && \
+ !defined(OMAP1_PLATFORM_DRIVER) && \
--- /dev/null
+--- a/drivers/usb/host/ehci-rt3883.c
++++ b/drivers/usb/host/ehci-rt3883.c
+@@ -21,7 +21,7 @@ static int ehci_rt3883_init(struct usb_h
+
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs +
+- HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
++ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
+ dbg_hcs_params(ehci, "reset");
+ dbg_hcc_params(ehci, "reset");
+
CONFIG_RALINK_DEV_GPIO_LEDS=y
CONFIG_RALINK_RT288X=y
# CONFIG_RALINK_RT305X is not set
+# CONFIG_RALINK_RT3883 is not set
# CONFIG_RAMIPS_ETH_DEBUG is not set
CONFIG_RAMIPS_WDT=y
CONFIG_RT288X_MACH_F5D8235_V1=y
CONFIG_RALINK_DEV_GPIO_LEDS=y
CONFIG_RALINK_RT288X=y
# CONFIG_RALINK_RT305X is not set
+# CONFIG_RALINK_RT3883 is not set
# CONFIG_RAMIPS_ETH_DEBUG is not set
CONFIG_RAMIPS_WDT=y
CONFIG_RT288X_MACH_F5D8235_V1=y
CONFIG_RALINK_DEV_GPIO_LEDS=y
# CONFIG_RALINK_RT288X is not set
CONFIG_RALINK_RT305X=y
+# CONFIG_RALINK_RT3883 is not set
# CONFIG_RAMIPS_ETH_DEBUG is not set
CONFIG_RAMIPS_WDT=y
CONFIG_RT305X_MACH_ALL0256N=y
CONFIG_RALINK_DEV_GPIO_LEDS=y
# CONFIG_RALINK_RT288X is not set
CONFIG_RALINK_RT305X=y
+# CONFIG_RALINK_RT3883 is not set
# CONFIG_RAMIPS_ETH_DEBUG is not set
CONFIG_RAMIPS_WDT=y
CONFIG_RT305X_MACH_ALL0256N=y
--- /dev/null
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ATH79 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_FSNOTIFY is not set
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_RANDOM=m
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+# CONFIG_LEDS_GPIO is not set
+CONFIG_LOONGSON_UART_BASE=y
+# CONFIG_MII is not set
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MIPS_RALINK=y
+CONFIG_MIPS_RAMIPS_NET=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_QUOTACTL is not set
+CONFIG_RALINK_DEV_GPIO_BUTTONS=y
+CONFIG_RALINK_DEV_GPIO_LEDS=y
+# CONFIG_RALINK_RT288X is not set
+# CONFIG_RALINK_RT305X is not set
+CONFIG_RALINK_RT3883=y
+# CONFIG_RAMIPS_ETH_DEBUG is not set
+CONFIG_RAMIPS_WDT=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_RT3883=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+# CONFIG_TINY_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_XZ_DEC=y
+CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ATH79 is not set
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_RANDOM=m
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+# CONFIG_LANTIQ is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_MII is not set
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MIPS_RALINK=y
+CONFIG_MIPS_RAMIPS_NET=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_QUOTACTL is not set
+CONFIG_RALINK_DEV_GPIO_BUTTONS=y
+CONFIG_RALINK_DEV_GPIO_LEDS=y
+# CONFIG_RALINK_RT288X is not set
+# CONFIG_RALINK_RT305X is not set
+CONFIG_RALINK_RT3883=y
+# CONFIG_RAMIPS_ETH_DEBUG is not set
+CONFIG_RAMIPS_WDT=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_RT3883=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XZ_DEC=y
+CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Default
+ NAME:=Default Profile
+ PACKAGES:=
+endef
+
+define Profile/Default/Description
+ Default package set compatible with most boards.
+endef
+$(eval $(call Profile,Default))
--- /dev/null
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+
+SUBTARGET:=rt3883
+BOARDNAME:=RT3662/RT3883 based boards
+
+define Target/Description
+ Build firmware images for Ralink RT3662/RT3883 based boards.
+endef
+
projects / openwrt.git / commitdiff