[ixp4xx]: move fixed mapping of internal devices into vmalloc region

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34158 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ixp4xx/patches-3.3/000-adjust_virtual_addresses.patch b/target/linux/ixp4xx/patches-3.3/000-adjust_virtual_addresses.patch
new file mode 100644 (file)
index 0000000..883b734
--- /dev/null
+++ b/target/linux/ixp4xx/patches-3.3/000-adjust_virtual_addresses.patch
@@ -0,0 +1,76 @@
+The current fixed physical/virtual mappings for the internal peripherals
+of the ixp4xx SoC devices is using a virtual address outside of the vmalloc
+region. This results in kernel warnings like this on the boot console:
+
+  BUG: mapping for 0xc8000000 at 0xffbeb000 out of vmalloc space
+  BUG: mapping for 0xc4000000 at 0xffbfe000 out of vmalloc space
+  BUG: mapping for 0xc0000000 at 0xffbff000 out of vmalloc space
+
+The virtual kernel memory layout lists this for the vmalloc region:
+
+    ...
+    vmalloc : 0xc2800000 - 0xff000000   ( 968 MB)
+    ...
+
+With a little adjustment to the virtual address used we can map these
+internal devices in the vmalloc region.
+
+Signed-off-by: Greg Ungerer <gerg@uclinux.org>
+
+---
+arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h |   14 +++++++-------
+ 1 files changed, 7 insertions(+), 7 deletions(-)
+
+diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+index 97c530f..ad66605 100644
+--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
++++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+@@ -32,11 +32,11 @@
+  *
+  * 0x6000000  0x00004000      ioremap'd       QMgr
+  *
+- * 0xC0000000 0x00001000      0xffbff000      PCI CFG
++ * 0xC0000000 0x00001000      0xfebff000      PCI CFG
+  *
+- * 0xC4000000 0x00001000      0xffbfe000      EXP CFG
++ * 0xC4000000 0x00001000      0xfebfe000      EXP CFG
+  *
+- * 0xC8000000 0x00013000      0xffbeb000      On-Chip Peripherals
++ * 0xC8000000 0x00013000      0xfebeb000      On-Chip Peripherals
+  */
+ 
+ /*
+@@ -49,21 +49,21 @@
+  * Expansion BUS Configuration registers
+  */
+ #define IXP4XX_EXP_CFG_BASE_PHYS      (0xC4000000)
+-#define IXP4XX_EXP_CFG_BASE_VIRT      (0xFFBFE000)
++#define IXP4XX_EXP_CFG_BASE_VIRT      (0xFEBFE000)
+ #define IXP4XX_EXP_CFG_REGION_SIZE    (0x00001000)
+ 
+ /*
+  * PCI Config registers
+  */
+ #define IXP4XX_PCI_CFG_BASE_PHYS      (0xC0000000)
+-#define       IXP4XX_PCI_CFG_BASE_VIRT        (0xFFBFF000)
++#define       IXP4XX_PCI_CFG_BASE_VIRT        (0xFEBFF000)
+ #define IXP4XX_PCI_CFG_REGION_SIZE    (0x00001000)
+ 
+ /*
+  * Peripheral space
+  */
+ #define IXP4XX_PERIPHERAL_BASE_PHYS   (0xC8000000)
+-#define IXP4XX_PERIPHERAL_BASE_VIRT   (0xFFBEB000)
++#define IXP4XX_PERIPHERAL_BASE_VIRT   (0xFEBEB000)
+ #define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000)
+ 
+ /*
+@@ -73,7 +73,7 @@
+  * aligned so that it * can be used with the low-level debug code.
+  */
+ #define       IXP4XX_DEBUG_UART_BASE_PHYS     (0xC8000000)
+-#define       IXP4XX_DEBUG_UART_BASE_VIRT     (0xffb00000)
++#define       IXP4XX_DEBUG_UART_BASE_VIRT     (0xfeb00000)
+ #define       IXP4XX_DEBUG_UART_REGION_SIZE   (0x00001000)
+ 
+ #define IXP4XX_EXP_CS0_OFFSET 0x00