ar71xx: add linux 3.10

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37214 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10
new file mode 100644 (file)
index 0000000..71a8a72
--- /dev/null
+++ b/target/linux/ar71xx/config-3.10
@@ -0,0 +1,264 @@
+CONFIG_AG71XX=y
+CONFIG_AG71XX_AR8216_SUPPORT=y
+# CONFIG_AG71XX_DEBUG is not set
+# CONFIG_AG71XX_DEBUG_FS is not set
+CONFIG_AR8216_PHY=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ATH79=y
+CONFIG_ATH79_DEV_AP9X_PCI=y
+CONFIG_ATH79_DEV_DSA=y
+CONFIG_ATH79_DEV_ETH=y
+CONFIG_ATH79_DEV_GPIO_BUTTONS=y
+CONFIG_ATH79_DEV_LEDS_GPIO=y
+CONFIG_ATH79_DEV_M25P80=y
+CONFIG_ATH79_DEV_NFC=y
+CONFIG_ATH79_DEV_SPI=y
+CONFIG_ATH79_DEV_USB=y
+CONFIG_ATH79_DEV_WMAC=y
+CONFIG_ATH79_MACH_ALFA_AP96=y
+CONFIG_ATH79_MACH_ALFA_NX=y
+CONFIG_ATH79_MACH_ALL0258N=y
+CONFIG_ATH79_MACH_ALL0315N=y
+CONFIG_ATH79_MACH_AP113=y
+CONFIG_ATH79_MACH_AP121=y
+CONFIG_ATH79_MACH_AP132=y
+CONFIG_ATH79_MACH_AP136=y
+CONFIG_ATH79_MACH_AP81=y
+CONFIG_ATH79_MACH_AP83=y
+CONFIG_ATH79_MACH_AP96=y
+CONFIG_ATH79_MACH_ARCHER_C7=y
+CONFIG_ATH79_MACH_AW_NR580=y
+CONFIG_ATH79_MACH_CAP4200AG=y
+CONFIG_ATH79_MACH_DB120=y
+CONFIG_ATH79_MACH_DIR_600_A1=y
+CONFIG_ATH79_MACH_DIR_615_C1=y
+CONFIG_ATH79_MACH_DIR_825_B1=y
+CONFIG_ATH79_MACH_DIR_825_C1=y
+CONFIG_ATH79_MACH_EAP7660D=y
+CONFIG_ATH79_MACH_EW_DORIN=y
+CONFIG_ATH79_MACH_HORNET_UB=y
+CONFIG_ATH79_MACH_JA76PF=y
+CONFIG_ATH79_MACH_JWAP003=y
+CONFIG_ATH79_MACH_MR600=y
+CONFIG_ATH79_MACH_MZK_W04NU=y
+CONFIG_ATH79_MACH_MZK_W300NH=y
+CONFIG_ATH79_MACH_NBG460N=y
+CONFIG_ATH79_MACH_OM2P=y
+CONFIG_ATH79_MACH_PB42=y
+CONFIG_ATH79_MACH_PB44=y
+CONFIG_ATH79_MACH_PB92=y
+# CONFIG_ATH79_MACH_RB2011 is not set
+# CONFIG_ATH79_MACH_RB4XX is not set
+# CONFIG_ATH79_MACH_RB750 is not set
+# CONFIG_ATH79_MACH_RB95X is not set
+CONFIG_ATH79_MACH_RW2458N=y
+CONFIG_ATH79_MACH_TEW_632BRP=y
+CONFIG_ATH79_MACH_TEW_673GRU=y
+CONFIG_ATH79_MACH_TEW_712BR=y
+CONFIG_ATH79_MACH_TL_MR11U=y
+CONFIG_ATH79_MACH_TL_MR3020=y
+CONFIG_ATH79_MACH_TL_MR3X20=y
+CONFIG_ATH79_MACH_TL_WA901ND=y
+CONFIG_ATH79_MACH_TL_WA901ND_V2=y
+CONFIG_ATH79_MACH_TL_WDR3500=y
+CONFIG_ATH79_MACH_TL_WDR4300=y
+CONFIG_ATH79_MACH_TL_WR1041N_V2=y
+CONFIG_ATH79_MACH_TL_WR1043ND=y
+CONFIG_ATH79_MACH_TL_WR2543N=y
+CONFIG_ATH79_MACH_TL_WR703N=y
+CONFIG_ATH79_MACH_TL_WR720N_V3=y
+CONFIG_ATH79_MACH_TL_WR741ND=y
+CONFIG_ATH79_MACH_TL_WR741ND_V4=y
+CONFIG_ATH79_MACH_TL_WR841N_V1=y
+CONFIG_ATH79_MACH_TL_WR841N_V8=y
+CONFIG_ATH79_MACH_TL_WR941ND=y
+CONFIG_ATH79_MACH_UBNT=y
+CONFIG_ATH79_MACH_UBNT_XM=y
+CONFIG_ATH79_MACH_WHR_HP_G300N=y
+CONFIG_ATH79_MACH_WLAE_AG300N=y
+CONFIG_ATH79_MACH_WNDAP360=y
+CONFIG_ATH79_MACH_WNDR3700=y
+CONFIG_ATH79_MACH_WNDR4300=y
+CONFIG_ATH79_MACH_WNR2000=y
+CONFIG_ATH79_MACH_WNR2000_V3=y
+CONFIG_ATH79_MACH_WP543=y
+CONFIG_ATH79_MACH_WPE72=y
+CONFIG_ATH79_MACH_WRT160NL=y
+CONFIG_ATH79_MACH_WRT400N=y
+CONFIG_ATH79_MACH_WZR_HP_AG300H=y
+CONFIG_ATH79_MACH_WZR_HP_G300NH=y
+CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
+CONFIG_ATH79_MACH_WZR_HP_G450H=y
+CONFIG_ATH79_MACH_ZCN_1523H=y
+CONFIG_ATH79_NVRAM=y
+CONFIG_ATH79_PCI_ATH9K_FIXUP=y
+# CONFIG_ATH79_ROUTERBOOT is not set
+# CONFIG_ATH79_WDT is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_NXP_74HC153=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_GPIO=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_SOURCE="../../root"
+CONFIG_IP17XX_PHY=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_LEDS_TRIGGER_NETDEV is not set
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_WNDR3700_USB is not set
+# CONFIG_M25PXX_USE_FAST_READ is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MICREL_PHY=y
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MYLOADER_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_TPLINK_PARTS=y
+CONFIG_MTD_WRT160NL_PARTS=y
+CONFIG_MYLOADER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6063=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+# CONFIG_NET_IP_TUNNEL is not set
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_AR724X=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366RB_PHY=y
+CONFIG_RTL8366S_PHY=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367_PHY=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_AR933X=y
+CONFIG_SERIAL_AR933X_CONSOLE=y
+CONFIG_SERIAL_AR933X_NR_UARTS=2
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_AR71XX=y
+CONFIG_SOC_AR724X=y
+CONFIG_SOC_AR913X=y
+CONFIG_SOC_AR933X=y
+CONFIG_SOC_AR934X=y
+CONFIG_SOC_QCA955X=y
+CONFIG_SPI=y
+CONFIG_SPI_AP83=y
+CONFIG_SPI_ATH79=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MASTER=y
+# CONFIG_SPI_VSC7385 is not set
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_LEDS=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_ZONE_DMA_FLAG=0

diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
index 71f0b1d..f3791e2 100644 (file)
--- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
+++ b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
@@ -131,7 +131,7 @@ static int ag71xx_phy_connect_multi(struct ag71xx *ag)
        }
 
        ag->phy_dev = phy_connect(dev, dev_name(&phydev->dev),
        }
 
        ag->phy_dev = phy_connect(dev, dev_name(&phydev->dev),

-                                 &ag71xx_phy_link_adjust, 0,
+                                 &ag71xx_phy_link_adjust,

                                  pdata->phy_if_mode);
 
        if (IS_ERR(ag->phy_dev)) {
                                  pdata->phy_if_mode);
 
        if (IS_ERR(ag->phy_dev)) {

diff --git a/target/linux/ar71xx/patches-3.10/206-spi-ath79-make-chipselect-logic-more-flexible.patch b/target/linux/ar71xx/patches-3.10/206-spi-ath79-make-chipselect-logic-more-flexible.patch
new file mode 100644 (file)
index 0000000..993fcdd
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/206-spi-ath79-make-chipselect-logic-more-flexible.patch
@@ -0,0 +1,310 @@
+From 7008284716403237f6bc7d7590b3ed073555bd56 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 11 Jan 2012 22:25:11 +0100
+Subject: [PATCH 34/34] spi/ath79: make chipselect logic more flexible
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/mach-ap121.c                       |    6 ++
+ arch/mips/ath79/mach-ap136.c                       |    6 ++
+ arch/mips/ath79/mach-ap81.c                        |    6 ++
+ arch/mips/ath79/mach-db120.c                       |    6 ++
+ arch/mips/ath79/mach-pb44.c                        |    6 ++
+ arch/mips/ath79/mach-ubnt-xm.c                     |    6 ++
+ .../include/asm/mach-ath79/ath79_spi_platform.h    |    8 ++-
+ drivers/spi/spi-ath79.c                            |   67 +++++++++++++-------
+ 8 files changed, 88 insertions(+), 23 deletions(-)
+
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -58,12 +58,18 @@ static struct gpio_keys_button ap121_gpi
+       }
+ };
+ 
++static struct ath79_spi_controller_data ap121_spi0_data = {
++      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++      .cs_line = 0,
++};
++
+ static struct spi_board_info ap121_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "mx25l1606e",
++              .controller_data = &ap121_spi0_data,
+       }
+ };
+ 
+--- a/arch/mips/ath79/mach-ap136.c
++++ b/arch/mips/ath79/mach-ap136.c
+@@ -98,12 +98,18 @@ static struct gpio_keys_button ap136_gpi
+       },
+ };
+ 
++static struct ath79_spi_controller_data ap136_spi0_data = {
++      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++      .cs_line = 0,
++};
++
+ static struct spi_board_info ap136_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "mx25l6405d",
++              .controller_data = &ap136_spi0_data,
+       }
+ };
+ 
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -67,12 +67,18 @@ static struct gpio_keys_button ap81_gpio
+       }
+ };
+ 
++static struct ath79_spi_controller_data ap81_spi0_data = {
++      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++      .cs_line = 0,
++};
++
+ static struct spi_board_info ap81_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "m25p64",
++              .controller_data = &ap81_spi0_data,
+       }
+ };
+ 
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -76,12 +76,18 @@ static struct gpio_keys_button db120_gpi
+       },
+ };
+ 
++static struct ath79_spi_controller_data db120_spi0_data = {
++      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++      .cs_line = 0,
++};
++
+ static struct spi_board_info db120_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "s25sl064a",
++              .controller_data = &db120_spi0_data,
+       }
+ };
+ 
+--- a/arch/mips/ath79/mach-pb44.c
++++ b/arch/mips/ath79/mach-pb44.c
+@@ -87,12 +87,18 @@ static struct gpio_keys_button pb44_gpio
+       }
+ };
+ 
++static struct ath79_spi_controller_data pb44_spi0_data = {
++      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++      .cs_line = 0,
++};
++
+ static struct spi_board_info pb44_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "m25p64",
++              .controller_data = &pb44_spi0_data,
+       },
+ };
+ 
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -65,12 +65,18 @@ static struct gpio_keys_button ubnt_xm_g
+       }
+ };
+ 
++static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
++      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++      .cs_line = 0,
++};
++
+ static struct spi_board_info ubnt_xm_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "mx25l6405d",
++              .controller_data = &ubnt_xm_spi0_data,
+       }
+ };
+ 
+--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+@@ -16,8 +16,14 @@ struct ath79_spi_platform_data {
+       unsigned        num_chipselect;
+ };
+ 
++enum ath79_spi_cs_type {
++      ATH79_SPI_CS_TYPE_INTERNAL,
++      ATH79_SPI_CS_TYPE_GPIO,
++};
++
+ struct ath79_spi_controller_data {
+-      unsigned        gpio;
++      enum ath79_spi_cs_type cs_type;
++      unsigned cs_line;
+ };
+ 
+ #endif /* _ATH79_SPI_PLATFORM_H */
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -35,6 +35,8 @@
+ #define ATH79_SPI_RRW_DELAY_FACTOR    12000
+ #define MHZ                           (1000 * 1000)
+ 
++#define ATH79_SPI_CS_LINE_MAX         2
++
+ struct ath79_spi {
+       struct spi_bitbang      bitbang;
+       u32                     ioc_base;
+@@ -69,6 +71,7 @@ static void ath79_spi_chipselect(struct 
+ {
+       struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+       int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active;
++      struct ath79_spi_controller_data *cdata = spi->controller_data;
+ 
+       if (is_active) {
+               /* set initial clock polarity */
+@@ -80,20 +83,24 @@ static void ath79_spi_chipselect(struct 
+               ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+       }
+ 
+-      if (spi->chip_select) {
+-              struct ath79_spi_controller_data *cdata = spi->controller_data;
+-
+-              /* SPI is normally active-low */
+-              gpio_set_value(cdata->gpio, cs_high);
+-      } else {
++      switch (cdata->cs_type) {
++      case ATH79_SPI_CS_TYPE_INTERNAL:
+               if (cs_high)
+-                      sp->ioc_base |= AR71XX_SPI_IOC_CS0;
++                      sp->ioc_base |= AR71XX_SPI_IOC_CS(cdata->cs_line);
+               else
+-                      sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
++                      sp->ioc_base &= ~AR71XX_SPI_IOC_CS(cdata->cs_line);
+ 
+               ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+-      }
++              break;
+ 
++      case ATH79_SPI_CS_TYPE_GPIO:
++              /* SPI is normally active-low */
++              if (gpio_cansleep(cdata->cs_line))
++                      gpio_set_value_cansleep(cdata->cs_line, cs_high);
++              else
++                      gpio_set_value(cdata->cs_line, cs_high);
++              break;
++      }
+ }
+ 
+ static void ath79_spi_enable(struct ath79_spi *sp)
+@@ -120,24 +127,30 @@ static void ath79_spi_disable(struct ath
+ static int ath79_spi_setup_cs(struct spi_device *spi)
+ {
+       struct ath79_spi_controller_data *cdata;
++      unsigned long flags;
+       int status;
+ 
+       cdata = spi->controller_data;
+-      if (spi->chip_select && !cdata)
++      if (!cdata)
+               return -EINVAL;
+ 
+       status = 0;
+-      if (spi->chip_select) {
+-              unsigned long flags;
++      switch (cdata->cs_type) {
++      case ATH79_SPI_CS_TYPE_INTERNAL:
++              if (cdata->cs_line > ATH79_SPI_CS_LINE_MAX)
++                      status = -EINVAL;
++              break;
+ 
++      case ATH79_SPI_CS_TYPE_GPIO:
+               flags = GPIOF_DIR_OUT;
+               if (spi->mode & SPI_CS_HIGH)
+                       flags |= GPIOF_INIT_HIGH;
+               else
+                       flags |= GPIOF_INIT_LOW;
+ 
+-              status = gpio_request_one(cdata->gpio, flags,
++              status = gpio_request_one(cdata->cs_line, flags,
+                                         dev_name(&spi->dev));
++              break;
+       }
+ 
+       return status;
+@@ -145,9 +158,19 @@ static int ath79_spi_setup_cs(struct spi
+ 
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
+ {
+-      if (spi->chip_select) {
+-              struct ath79_spi_controller_data *cdata = spi->controller_data;
+-              gpio_free(cdata->gpio);
++      struct ath79_spi_controller_data *cdata;
++
++      cdata = spi->controller_data;
++      if (!cdata)
++              return;
++
++      switch (cdata->cs_type) {
++      case ATH79_SPI_CS_TYPE_INTERNAL:
++              /* nothing to do */
++              break;
++      case ATH79_SPI_CS_TYPE_GPIO:
++              gpio_free(cdata->cs_line);
++              break;
+       }
+ }
+ 
+@@ -155,6 +178,9 @@ static int ath79_spi_setup(struct spi_de
+ {
+       int status = 0;
+ 
++      if (spi->controller_data == NULL)
++              return -EINVAL;
++
+       if (spi->bits_per_word > 32)
+               return -EINVAL;
+ 
+@@ -215,6 +241,10 @@ static int ath79_spi_probe(struct platfo
+       unsigned long rate;
+       int ret;
+ 
++      pdata = pdev->dev.platform_data;
++      if (!pdata)
++              return -EINVAL;
++
+       master = spi_alloc_master(&pdev->dev, sizeof(*sp));
+       if (master == NULL) {
+               dev_err(&pdev->dev, "failed to allocate spi master\n");
+@@ -224,14 +254,10 @@ static int ath79_spi_probe(struct platfo
+       sp = spi_master_get_devdata(master);
+       platform_set_drvdata(pdev, sp);
+ 
+-      pdata = pdev->dev.platform_data;
+-
+       master->setup = ath79_spi_setup;
+       master->cleanup = ath79_spi_cleanup;
+-      if (pdata) {
+-              master->bus_num = pdata->bus_num;
+-              master->num_chipselect = pdata->num_chipselect;
+-      }
++      master->bus_num = pdata->bus_num;
++      master->num_chipselect = pdata->num_chipselect;
+ 
+       sp->bitbang.master = spi_master_get(master);
+       sp->bitbang.chipselect = ath79_spi_chipselect;

diff --git a/target/linux/ar71xx/patches-3.10/213-MIPS-ath79-fix-ar933x-wmac-reset.patch b/target/linux/ar71xx/patches-3.10/213-MIPS-ath79-fix-ar933x-wmac-reset.patch
new file mode 100644 (file)
index 0000000..e0821a7
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/213-MIPS-ath79-fix-ar933x-wmac-reset.patch
@@ -0,0 +1,31 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -62,10 +62,27 @@ static void __init ar913x_wmac_setup(voi
+ 
+ static int ar933x_wmac_reset(void)
+ {
++      int retries = 20;
++
+       ath79_device_reset_set(AR933X_RESET_WMAC);
+       ath79_device_reset_clear(AR933X_RESET_WMAC);
+ 
+-      return 0;
++      while (1) {
++              u32 bootstrap;
++
++              bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++              if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0)
++                      return 0;
++
++              if (retries-- == 0)
++                      break;
++
++              udelay(10000);
++              retries++;
++      }
++
++      pr_err("ar933x: WMAC reset timed out");
++      return -ETIMEDOUT;
+ }
+ 
+ static int ar933x_r1_get_wmac_revision(void)

diff --git a/target/linux/ar71xx/patches-3.10/220-add_cpu_feature_overrides.patch b/target/linux/ar71xx/patches-3.10/220-add_cpu_feature_overrides.patch
new file mode 100644 (file)
index 0000000..05406f2
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/220-add_cpu_feature_overrides.patch
@@ -0,0 +1,28 @@
+--- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
++++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
+@@ -36,6 +36,7 @@
+ #define cpu_has_mdmx          0
+ #define cpu_has_mips3d                0
+ #define cpu_has_smartmips     0
++#define cpu_has_rixi          0
+ 
+ #define cpu_has_mips32r1      1
+ #define cpu_has_mips32r2      1
+@@ -45,6 +46,7 @@
+ #define cpu_has_dsp           0
+ #define cpu_has_dsp2          0
+ #define cpu_has_mipsmt                0
++#define cpu_has_userlocal     0
+ 
+ #define cpu_has_64bits                0
+ #define cpu_has_64bit_zero_reg        0
+@@ -53,5 +55,9 @@
+ 
+ #define cpu_dcache_line_size()        32
+ #define cpu_icache_line_size()        32
++#define cpu_has_vtag_icache   0
++#define cpu_has_dc_aliases    1
++#define cpu_has_ic_fills_f_dc 0
++#define cpu_has_pindexed_dcache       0
+ 
+ #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */

diff --git a/target/linux/ar71xx/patches-3.10/310-lib-add-rle-decompression.patch b/target/linux/ar71xx/patches-3.10/310-lib-add-rle-decompression.patch
new file mode 100644 (file)
index 0000000..5c43ae2
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/310-lib-add-rle-decompression.patch
@@ -0,0 +1,114 @@
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -197,6 +197,9 @@ config LZMA_COMPRESS
+ config LZMA_DECOMPRESS
+     tristate
+ 
++config RLE_DECOMPRESS
++      tristate
++
+ #
+ # These all provide a common interface (hence the apparent duplication with
+ # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -89,6 +89,7 @@ obj-$(CONFIG_XZ_DEC) += xz/
+ obj-$(CONFIG_RAID6_PQ) += raid6/
+ obj-$(CONFIG_LZMA_COMPRESS) += lzma/
+ obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
++obj-$(CONFIG_RLE_DECOMPRESS) += rle.o
+ 
+ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+ lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+--- /dev/null
++++ b/include/linux/rle.h
+@@ -0,0 +1,8 @@
++#ifndef _RLE_H_
++#define _RLE_H_
++
++int rle_decode(const unsigned char *src, size_t srclen,
++             unsigned char *dst, size_t dstlen,
++             size_t *src_done, size_t *dst_done);
++
++#endif /* _RLE_H_ */
+--- /dev/null
++++ b/lib/rle.c
+@@ -0,0 +1,78 @@
++/*
++ *  RLE decoding routine
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/rle.h>
++
++int rle_decode(const unsigned char *src, size_t srclen,
++             unsigned char *dst, size_t dstlen,
++             size_t *src_done, size_t *dst_done)
++{
++      size_t srcpos, dstpos;
++      int ret;
++
++      srcpos = 0;
++      dstpos = 0;
++      ret = -EINVAL;
++
++      /* sanity checks */
++      if (!src || !srclen || !dst || !dstlen)
++              goto out;
++
++      while (1) {
++              char count;
++
++              if (srcpos >= srclen)
++                      break;
++
++              count = (char) src[srcpos++];
++              if (count == 0) {
++                      ret = 0;
++                      break;
++              }
++
++              if (count > 0) {
++                      unsigned char c;
++
++                      if (srcpos >= srclen)
++                              break;
++
++                      c = src[srcpos++];
++
++                      while (count--) {
++                              if (dstpos >= dstlen)
++                                      break;
++
++                              dst[dstpos++] = c;
++                      }
++              } else {
++                      count *= -1;
++
++                      while (count--) {
++                              if (srcpos >= srclen)
++                                      break;
++                              if (dstpos >= dstlen)
++                                      break;
++                              dst[dstpos++] = src[srcpos++];
++                      }
++              }
++      }
++
++out:
++      if (src_done)
++              *src_done = srcpos;
++      if (dst_done)
++              *dst_done = dstpos;
++
++      return ret;
++}
++
++EXPORT_SYMBOL_GPL(rle_decode);

diff --git a/target/linux/ar71xx/patches-3.10/401-mtd-physmap-add-lock-unlock.patch b/target/linux/ar71xx/patches-3.10/401-mtd-physmap-add-lock-unlock.patch
new file mode 100644 (file)
index 0000000..953ae58
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/401-mtd-physmap-add-lock-unlock.patch
@@ -0,0 +1,94 @@
+--- a/drivers/mtd/maps/physmap.c
++++ b/drivers/mtd/maps/physmap.c
+@@ -31,6 +31,66 @@ struct physmap_flash_info {
+       int                     vpp_refcnt;
+ };
+ 
++static struct platform_device *physmap_map2pdev(struct map_info *map)
++{
++      return (struct platform_device *) map->map_priv_1;
++}
++
++static void physmap_lock(struct map_info *map)
++{
++      struct platform_device *pdev;
++      struct physmap_flash_data *physmap_data;
++
++      pdev = physmap_map2pdev(map);
++      physmap_data = pdev->dev.platform_data;
++      physmap_data->lock(pdev);
++}
++
++static void physmap_unlock(struct map_info *map)
++{
++      struct platform_device *pdev;
++      struct physmap_flash_data *physmap_data;
++
++      pdev = physmap_map2pdev(map);
++      physmap_data = pdev->dev.platform_data;
++      physmap_data->unlock(pdev);
++}
++
++static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs)
++{
++      map_word ret;
++
++      physmap_lock(map);
++      ret = inline_map_read(map, ofs);
++      physmap_unlock(map);
++
++      return ret;
++}
++
++static void physmap_flash_write_lock(struct map_info *map, map_word d,
++                                   unsigned long ofs)
++{
++      physmap_lock(map);
++      inline_map_write(map, d, ofs);
++      physmap_unlock(map);
++}
++
++static void physmap_flash_copy_from_lock(struct map_info *map, void *to,
++                                       unsigned long from, ssize_t len)
++{
++      physmap_lock(map);
++      inline_map_copy_from(map, to, from, len);
++      physmap_unlock(map);
++}
++
++static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to,
++                                     const void *from, ssize_t len)
++{
++      physmap_lock(map);
++      inline_map_copy_to(map, to, from, len);
++      physmap_unlock(map);
++}
++
+ static int physmap_flash_remove(struct platform_device *dev)
+ {
+       struct physmap_flash_info *info;
+@@ -154,6 +214,13 @@ static int physmap_flash_probe(struct pl
+ 
+               simple_map_init(&info->map[i]);
+ 
++              if (physmap_data->lock && physmap_data->unlock) {
++                      info->map[i].read = physmap_flash_read_lock;
++                      info->map[i].write = physmap_flash_write_lock;
++                      info->map[i].copy_from = physmap_flash_copy_from_lock;
++                      info->map[i].copy_to = physmap_flash_copy_to_lock;
++              }
++
+               probe_type = rom_probe_types;
+               if (physmap_data->probe_type == NULL) {
+                       for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
+--- a/include/linux/mtd/physmap.h
++++ b/include/linux/mtd/physmap.h
+@@ -26,6 +26,8 @@ struct physmap_flash_data {
+       unsigned int            width;
+       int                     (*init)(struct platform_device *);
+       void                    (*exit)(struct platform_device *);
++      void                    (*lock)(struct platform_device *);
++      void                    (*unlock)(struct platform_device *);
+       void                    (*set_vpp)(struct platform_device *, int);
+       unsigned int            nr_parts;
+       unsigned int            pfow_base;

diff --git a/target/linux/ar71xx/patches-3.10/402-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-3.10/402-mtd-SST39VF6401B-support.patch
new file mode 100644 (file)
index 0000000..246abd5
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/402-mtd-SST39VF6401B-support.patch
@@ -0,0 +1,29 @@
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
+@@ -148,6 +148,7 @@
+ #define SST39LF160    0x2782
+ #define SST39VF1601   0x234b
+ #define SST39VF3201   0x235b
++#define SST39VF6401B  0x236d
+ #define SST39WF1601   0x274b
+ #define SST39WF1602   0x274a
+ #define SST39LF512    0x00D4
+@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec
+                       ERASEINFO(0x10000,64),
+               }
+       }, {
++              .mfr_id         = CFI_MFR_SST,
++              .dev_id         = SST39VF6401B,
++              .name           = "SST 39VF6401B",
++              .devtypes       = CFI_DEVICETYPE_X16,
++              .uaddr          = MTD_UADDR_0xAAAA_0x5555,
++              .dev_size       = SIZE_8MiB,
++              .cmd_set        = P_ID_AMD_STD,
++              .nr_regions     = 1,
++              .regions        = {
++                      ERASEINFO(0x10000,128)
++              }
++      }, {
+               .mfr_id         = CFI_MFR_ST,
+               .dev_id         = M29F800AB,
+               .name           = "ST M29F800AB",

diff --git a/target/linux/ar71xx/patches-3.10/403-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-3.10/403-mtd_fix_cfi_cmdset_0002_status_check.patch
new file mode 100644 (file)
index 0000000..88d3ab7
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/403-mtd_fix_cfi_cmdset_0002_status_check.patch
@@ -0,0 +1,69 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1306,8 +1306,8 @@ static int __xipram do_write_oneword(str
+                       break;
+               }
+ 
+-              if (chip_ready(map, adr))
+-                      break;
++              if (chip_good(map, adr, datum))
++                      goto enable_xip;
+ 
+               /* Latency issues. Drop the lock, wait a while and retry */
+               UDELAY(map, chip, adr, 1);
+@@ -1323,6 +1323,8 @@ static int __xipram do_write_oneword(str
+ 
+               ret = -EIO;
+       }
++
++ enable_xip:
+       xip_enable(map, chip, adr);
+  op_done:
+       chip->state = FL_READY;
+@@ -1893,7 +1895,6 @@ static int cfi_amdstd_panic_write(struct
+       return 0;
+ }
+ 
+-
+ /*
+  * Handle devices with one erase region, that only implement
+  * the chip erase command.
+@@ -1957,8 +1958,8 @@ static int __xipram do_erase_chip(struct
+                       chip->erase_suspended = 0;
+               }
+ 
+-              if (chip_ready(map, adr))
+-                      break;
++              if (chip_good(map, adr, map_word_ff(map)))
++                      goto op_done;
+ 
+               if (time_after(jiffies, timeo)) {
+                       printk(KERN_WARNING "MTD %s(): software timeout\n",
+@@ -1978,6 +1979,7 @@ static int __xipram do_erase_chip(struct
+               ret = -EIO;
+       }
+ 
++ op_done:
+       chip->state = FL_READY;
+       xip_enable(map, chip, adr);
+       DISABLE_VPP(map);
+@@ -2046,9 +2048,9 @@ static int __xipram do_erase_oneblock(st
+                       chip->erase_suspended = 0;
+               }
+ 
+-              if (chip_ready(map, adr)) {
++              if (chip_good(map, adr, map_word_ff(map))) {
+                       xip_enable(map, chip, adr);
+-                      break;
++                      goto op_done;
+               }
+ 
+               if (time_after(jiffies, timeo)) {
+@@ -2070,6 +2072,7 @@ static int __xipram do_erase_oneblock(st
+               ret = -EIO;
+       }
+ 
++ op_done:
+       chip->state = FL_READY;
+       DISABLE_VPP(map);
+       put_chip(map, chip, adr);

diff --git a/target/linux/ar71xx/patches-3.10/404-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-3.10/404-mtd-wrt160nl-trx-parser.patch
new file mode 100644 (file)
index 0000000..307033f
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/404-mtd-wrt160nl-trx-parser.patch
@@ -0,0 +1,25 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -163,6 +163,12 @@ config MTD_BCM47XX_PARTS
+         This provides partitions parser for devices based on BCM47xx
+         boards.
+ 
++config MTD_WRT160NL_PARTS
++      tristate "Linksys WRT160NL partitioning support"
++      depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
++      ---help---
++         Linksys WRT160NL partitioning support
++
+ config MTD_MYLOADER_PARTS
+       tristate "MyLoader partition parsing"
+       depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)  += ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS)       += bcm63xxpart.o
+ obj-$(CONFIG_MTD_BCM47XX_PARTS)       += bcm47xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
++obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
+ 
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_BLKDEVS)     += mtd_blkdevs.o

diff --git a/target/linux/ar71xx/patches-3.10/405-mtd-tp-link-partition-parser.patch b/target/linux/ar71xx/patches-3.10/405-mtd-tp-link-partition-parser.patch
new file mode 100644 (file)
index 0000000..2e9cde5
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/405-mtd-tp-link-partition-parser.patch
@@ -0,0 +1,34 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -165,7 +165,7 @@ config MTD_BCM47XX_PARTS
+ 
+ config MTD_WRT160NL_PARTS
+       tristate "Linksys WRT160NL partitioning support"
+-      depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
++      depends on ATH79_MACH_WRT160NL
+       ---help---
+          Linksys WRT160NL partitioning support
+ 
+@@ -185,6 +185,12 @@ config MTD_MYLOADER_PARTS
+         You will still need the parsing functions to be called by the driver
+         for your particular device. It won't happen automatically.
+ 
++config MTD_TPLINK_PARTS
++      tristate "TP-Link AR7XXX/AR9XXX partitioning support"
++      depends on ATH79
++      ---help---
++        TBD.
++
+ comment "User Modules And Translation Layers"
+ 
+ config MTD_BLKDEVS
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)  += ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS)       += bcm63xxpart.o
+ obj-$(CONFIG_MTD_BCM47XX_PARTS)       += bcm47xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
++obj-$(CONFIG_MTD_TPLINK_PARTS)        += tplinkpart.o
+ obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
+ 
+ # 'Users' - code which presents functionality to userspace.

diff --git a/target/linux/ar71xx/patches-3.10/406-mtd-m25p80-allow-to-specify-max-read-size.patch b/target/linux/ar71xx/patches-3.10/406-mtd-m25p80-allow-to-specify-max-read-size.patch
new file mode 100644 (file)
index 0000000..3f9c182
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/406-mtd-m25p80-allow-to-specify-max-read-size.patch
@@ -0,0 +1,109 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -93,6 +93,7 @@ struct m25p {
+       u8                      erase_opcode;
+       u8                      *command;
+       bool                    fast_read;
++      size_t                  max_read_len;
+ };
+ 
+ static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
+@@ -344,6 +345,7 @@ static int m25p80_read(struct mtd_info *
+       struct spi_transfer t[2];
+       struct spi_message m;
+       uint8_t opcode;
++      loff_t ofs;
+ 
+       pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+                       __func__, (u32)from, len);
+@@ -359,19 +361,10 @@ static int m25p80_read(struct mtd_info *
+       t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0);
+       spi_message_add_tail(&t[0], &m);
+ 
+-      t[1].rx_buf = buf;
+-      t[1].len = len;
+       spi_message_add_tail(&t[1], &m);
+ 
+       mutex_lock(&flash->lock);
+ 
+-      /* Wait till previous write/erase is done. */
+-      if (wait_till_ready(flash)) {
+-              /* REVISIT status return?? */
+-              mutex_unlock(&flash->lock);
+-              return 1;
+-      }
+-
+       /* FIXME switch to OPCODE_FAST_READ.  It's required for higher
+        * clocks; and at this writing, every chip this driver handles
+        * supports that opcode.
+@@ -380,13 +373,43 @@ static int m25p80_read(struct mtd_info *
+       /* Set up the write data buffer. */
+       opcode = flash->fast_read ? OPCODE_FAST_READ : OPCODE_NORM_READ;
+       flash->command[0] = opcode;
+-      m25p_addr2cmd(flash, from, flash->command);
++      ofs = 0;
++      while (len) {
++              size_t readlen;
++              size_t done;
++              int ret;
++
++              ret = wait_till_ready(flash);
++              if (ret) {
++                      mutex_unlock(&flash->lock);
++                      return 1;
++              }
++
++              if (flash->max_read_len > 0 &&
++                  flash->max_read_len < len)
++                      readlen = flash->max_read_len;
++              else
++                      readlen = len;
++
++              t[1].rx_buf = buf + ofs;
++              t[1].len = readlen;
++
++              m25p_addr2cmd(flash, from + ofs, flash->command);
++
++              spi_sync(flash->spi, &m);
+ 
+-      spi_sync(flash->spi, &m);
++              done = m.actual_length - m25p_cmdsz(flash) -
++                     (flash->fast_read ? 1 : 0);
++              if (done != readlen) {
++                      mutex_unlock(&flash->lock);
++                      return 1;
++              }
+ 
+-      *retlen = m.actual_length - m25p_cmdsz(flash) -
+-                      (flash->fast_read ? 1 : 0);
++              ofs += done;
++              len -= done;
++      }
+ 
++      *retlen = ofs;
+       mutex_unlock(&flash->lock);
+ 
+       return 0;
+@@ -1021,6 +1044,12 @@ static int m25p_probe(struct spi_device 
+               flash->mtd._unlock = m25p80_unlock;
+       }
+ 
++      if (data && data->max_read_len) {
++              flash->max_read_len = data->max_read_len;
++              dev_warn(&spi->dev, "max_read_len set to %d bytes\n",
++                      flash->max_read_len);
++      }
++
+       /* sst flash chips use AAI word program */
+       if (info->flags & SST_WRITE)
+               flash->mtd._write = sst_write;
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -25,6 +25,7 @@ struct flash_platform_data {
+ 
+       char            *type;
+ 
++      size_t          max_read_len;
+       /* we'll likely add more ... use JEDEC IDs, etc */
+ };
+ 

diff --git a/target/linux/ar71xx/patches-3.10/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch b/target/linux/ar71xx/patches-3.10/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch
new file mode 100644 (file)
index 0000000..5da93a4
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch
@@ -0,0 +1,23 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -1121,7 +1121,9 @@ static int m25p_probe(struct spi_device 
+       /* partitions should match sector boundaries; and it may be good to
+        * use readonly partitions for writeprotected sectors (BP2..BP0).
+        */
+-      return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
++      return mtd_device_parse_register(&flash->mtd,
++                      data ? data->part_probes : NULL,
++                      &ppdata,
+                       data ? data->parts : NULL,
+                       data ? data->nr_parts : 0);
+ }
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -24,6 +24,7 @@ struct flash_platform_data {
+       unsigned int    nr_parts;
+ 
+       char            *type;
++      const char      **part_probes;
+ 
+       size_t          max_read_len;
+       /* we'll likely add more ... use JEDEC IDs, etc */

diff --git a/target/linux/ar71xx/patches-3.10/408-mtd-redboot_partition_scan.patch b/target/linux/ar71xx/patches-3.10/408-mtd-redboot_partition_scan.patch
new file mode 100644 (file)
index 0000000..cd41e7c
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/408-mtd-redboot_partition_scan.patch
@@ -0,0 +1,44 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -76,12 +76,18 @@ static int parse_redboot_partitions(stru
+       static char nullstring[] = "unallocated";
+ #endif
+ 
++      buf = vmalloc(master->erasesize);
++      if (!buf)
++              return -ENOMEM;
++
++ restart:
+       if ( directory < 0 ) {
+               offset = master->size + directory * master->erasesize;
+               while (mtd_block_isbad(master, offset)) {
+                       if (!offset) {
+                       nogood:
+                               printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++                              vfree(buf);
+                               return -EIO;
+                       }
+                       offset -= master->erasesize;
+@@ -94,10 +100,6 @@ static int parse_redboot_partitions(stru
+                               goto nogood;
+               }
+       }
+-      buf = vmalloc(master->erasesize);
+-
+-      if (!buf)
+-              return -ENOMEM;
+ 
+       printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+              master->name, offset);
+@@ -170,6 +172,11 @@ static int parse_redboot_partitions(stru
+       }
+       if (i == numslots) {
+               /* Didn't find it */
++              if (offset + master->erasesize < master->size) {
++                      /* not at the end of the flash yet, maybe next block :) */
++                      directory++;
++                      goto restart;
++              }
+               printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+                      master->name);
+               ret = 0;

diff --git a/target/linux/ar71xx/patches-3.10/409-mtd-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-3.10/409-mtd-rb4xx_nand_driver.patch
new file mode 100644 (file)
index 0000000..e8ea200
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/409-mtd-rb4xx_nand_driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -544,4 +544,8 @@ config MTD_NAND_XWAY
+         Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
+         to the External Bus Unit (EBU).
+ 
++config MTD_NAND_RB4XX
++      tristate "NAND flash driver for RouterBoard 4xx series"
++      depends on MTD_NAND && ATH79_MACH_RB4XX
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)               += cmx27
+ obj-$(CONFIG_MTD_NAND_PXA3xx)         += pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO)           += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)               += plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB4XX)          += rb4xx_nand.o
+ obj-$(CONFIG_MTD_ALAUDA)              += alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)         += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)          += orion_nand.o

diff --git a/target/linux/ar71xx/patches-3.10/410-mtd-rb750-nand-driver.patch b/target/linux/ar71xx/patches-3.10/410-mtd-rb750-nand-driver.patch
new file mode 100644 (file)
index 0000000..bf84807
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/410-mtd-rb750-nand-driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -548,4 +548,8 @@ config MTD_NAND_RB4XX
+       tristate "NAND flash driver for RouterBoard 4xx series"
+       depends on MTD_NAND && ATH79_MACH_RB4XX
+ 
++config MTD_NAND_RB750
++      tristate "NAND flash driver for the RouterBoard 750"
++      depends on MTD_NAND && ATH79_MACH_RB750
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -32,6 +32,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx)                += pxa3xx
+ obj-$(CONFIG_MTD_NAND_TMIO)           += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)               += plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX)          += rb4xx_nand.o
++obj-$(CONFIG_MTD_NAND_RB750)          += rb750_nand.o
+ obj-$(CONFIG_MTD_ALAUDA)              += alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)         += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)          += orion_nand.o

diff --git a/target/linux/ar71xx/patches-3.10/411-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-3.10/411-mtd-cfi_cmdset_0002-force-word-write.patch
new file mode 100644 (file)
index 0000000..58485d0
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/411-mtd-cfi_cmdset_0002-force-word-write.patch
@@ -0,0 +1,61 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -41,7 +41,7 @@
+ #include <linux/mtd/xip.h>
+ 
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+ 
+ #define MAX_WORD_RETRIES 3
+ 
+@@ -52,7 +52,9 @@
+ 
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -192,6 +194,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
+ 
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+       struct map_info *map = mtd->priv;
+@@ -201,6 +204,7 @@ static void fixup_use_write_buffers(stru
+               mtd->_write = cfi_amdstd_write_buffers;
+       }
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1463,6 +1467,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+  * FIXME: interleaved mode not tested, and probably not supported!
+  */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+                                   unsigned long adr, const u_char *buf,
+                                   int len)
+@@ -1587,7 +1592,6 @@ static int __xipram do_write_buffer(stru
+       return ret;
+ }
+ 
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+                                   size_t *retlen, const u_char *buf)
+ {
+@@ -1662,6 +1666,7 @@ static int cfi_amdstd_write_buffers(stru
+ 
+       return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /*
+  * Wait for the flash chip to become ready to write data

diff --git a/target/linux/ar71xx/patches-3.10/412-mtd-m25p80-zero-partition-parser-data.patch b/target/linux/ar71xx/patches-3.10/412-mtd-m25p80-zero-partition-parser-data.patch
new file mode 100644 (file)
index 0000000..3c987d9
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/412-mtd-m25p80-zero-partition-parser-data.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -1071,6 +1071,7 @@ static int m25p_probe(struct spi_device 
+       if (info->flags & M25P_NO_ERASE)
+               flash->mtd.flags |= MTD_NO_ERASE;
+ 
++      memset(&ppdata, '\0', sizeof(ppdata));
+       ppdata.of_node = spi->dev.of_node;
+       flash->mtd.dev.parent = &spi->dev;
+       flash->page_size = info->page_size;

diff --git a/target/linux/ar71xx/patches-3.10/413-mtd-ar934x-nand-driver.patch b/target/linux/ar71xx/patches-3.10/413-mtd-ar934x-nand-driver.patch
new file mode 100644 (file)
index 0000000..d7107b0
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/413-mtd-ar934x-nand-driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -552,4 +552,8 @@ config MTD_NAND_RB750
+       tristate "NAND flash driver for the RouterBoard 750"
+       depends on MTD_NAND && ATH79_MACH_RB750
+ 
++config MTD_NAND_AR934X
++      tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
++      depends on (SOC_AR934X || SOC_QCA955X)
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_AMS_DELTA)     += ams-
+ obj-$(CONFIG_MTD_NAND_DENALI)         += denali.o
+ obj-$(CONFIG_MTD_NAND_DENALI_PCI)     += denali_pci.o
+ obj-$(CONFIG_MTD_NAND_DENALI_DT)      += denali_dt.o
++obj-$(CONFIG_MTD_NAND_AR934X)         += ar934x_nfc.o
+ obj-$(CONFIG_MTD_NAND_AU1550)         += au1550nd.o
+ obj-$(CONFIG_MTD_NAND_BF5XX)          += bf5xx_nand.o
+ obj-$(CONFIG_MTD_NAND_S3C2410)                += s3c2410.o

diff --git a/target/linux/ar71xx/patches-3.10/420-net-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-3.10/420-net-ar71xx_mac_driver.patch
new file mode 100644 (file)
index 0000000..b6f8109
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/420-net-ar71xx_mac_driver.patch
@@ -0,0 +1,28 @@
+--- a/drivers/net/ethernet/atheros/Kconfig
++++ b/drivers/net/ethernet/atheros/Kconfig
+@@ -5,7 +5,7 @@
+ config NET_VENDOR_ATHEROS
+       bool "Atheros devices"
+       default y
+-      depends on PCI
++      depends on (PCI || ATH79)
+       ---help---
+         If you have a network (Ethernet) card belonging to this class, say Y
+         and read the Ethernet-HOWTO, available from
+@@ -85,4 +85,6 @@ config ALX
+         To compile this driver as a module, choose M here.  The module
+         will be called alx.
+ 
++source drivers/net/ethernet/atheros/ag71xx/Kconfig
++
+ endif # NET_VENDOR_ATHEROS
+--- a/drivers/net/ethernet/atheros/Makefile
++++ b/drivers/net/ethernet/atheros/Makefile
+@@ -2,6 +2,7 @@
+ # Makefile for the Atheros network device drivers.
+ #
+ 
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_ATL1) += atlx/
+ obj-$(CONFIG_ATL2) += atlx/
+ obj-$(CONFIG_ATL1E) += atl1e/

diff --git a/target/linux/ar71xx/patches-3.10/422-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-3.10/422-dsa-trailer-tag-validation-fix.patch
new file mode 100644 (file)
index 0000000..3e3902b
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/422-dsa-trailer-tag-validation-fix.patch
@@ -0,0 +1,11 @@
+--- a/net/dsa/tag_trailer.c
++++ b/net/dsa/tag_trailer.c
+@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s
+ 
+       trailer = skb_tail_pointer(skb) - 4;
+       if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
+-          (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
++          (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
+               goto out_drop;
+ 
+       source_port = trailer[1] & 7;

diff --git a/target/linux/ar71xx/patches-3.10/423-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-3.10/423-dsa-add-88e6063-driver.patch
new file mode 100644 (file)
index 0000000..1348cd9
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/423-dsa-add-88e6063-driver.patch
@@ -0,0 +1,24 @@
+--- a/drivers/net/dsa/Kconfig
++++ b/drivers/net/dsa/Kconfig
+@@ -13,6 +13,13 @@ config NET_DSA_MV88E6060
+         This enables support for the Marvell 88E6060 ethernet switch
+         chip.
+ 
++config NET_DSA_MV88E6063
++      bool "Marvell 88E6063 ethernet switch chip support"
++      select NET_DSA_TAG_TRAILER
++      ---help---
++        This enables support for the Marvell 88E6063 ethernet switch
++        chip
++
+ config NET_DSA_MV88E6XXX_NEED_PPU
+       bool
+       default n
+--- a/drivers/net/dsa/Makefile
++++ b/drivers/net/dsa/Makefile
+@@ -1,4 +1,5 @@
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
+ obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
+ mv88e6xxx_drv-y += mv88e6xxx.o
+ ifdef CONFIG_NET_DSA_MV88E6123_61_65

diff --git a/target/linux/ar71xx/patches-3.10/430-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-3.10/430-drivers-link-spi-before-mtd.patch
new file mode 100644 (file)
index 0000000..ca4bd47
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/430-drivers-link-spi-before-mtd.patch
@@ -0,0 +1,12 @@
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -63,8 +63,8 @@ obj-$(CONFIG_IDE)            += ide/
+ obj-$(CONFIG_SCSI)            += scsi/
+ obj-$(CONFIG_ATA)             += ata/
+ obj-$(CONFIG_TARGET_CORE)     += target/
+-obj-$(CONFIG_MTD)             += mtd/
+ obj-$(CONFIG_SPI)             += spi/
++obj-$(CONFIG_MTD)             += mtd/
+ obj-y                         += hsi/
+ obj-y                         += net/
+ obj-$(CONFIG_ATM)             += atm/

diff --git a/target/linux/ar71xx/patches-3.10/431-spi-add-various-flags.patch b/target/linux/ar71xx/patches-3.10/431-spi-add-various-flags.patch
new file mode 100644 (file)
index 0000000..dca3366
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/431-spi-add-various-flags.patch
@@ -0,0 +1,19 @@
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -519,6 +519,8 @@ struct spi_transfer {
+       dma_addr_t      rx_dma;
+ 
+       unsigned        cs_change:1;
++      unsigned        verify:1;
++      unsigned        fast_write:1;
+       u8              bits_per_word;
+       u16             delay_usecs;
+       u32             speed_hz;
+@@ -560,6 +562,7 @@ struct spi_message {
+       struct spi_device       *spi;
+ 
+       unsigned                is_dma_mapped:1;
++      unsigned                fast_read:1;
+ 
+       /* REVISIT:  we might want a flag affecting the behavior of the
+        * last transfer ... allowing things like "read 16 bit length L"

diff --git a/target/linux/ar71xx/patches-3.10/432-spi-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-3.10/432-spi-rb4xx-spi-driver.patch
new file mode 100644 (file)
index 0000000..9be59fc
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/432-spi-rb4xx-spi-driver.patch
@@ -0,0 +1,25 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -354,6 +354,12 @@ config SPI_RSPI
+       help
+         SPI driver for Renesas RSPI blocks.
+ 
++config SPI_RB4XX
++      tristate "Mikrotik RB4XX SPI master"
++      depends on SPI_MASTER && ATH79_MACH_RB4XX
++      help
++        SPI controller driver for the Mikrotik RB4xx series boards.
++
+ config SPI_S3C24XX
+       tristate "Samsung S3C24XX series SPI"
+       depends on ARCH_S3C24XX
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -55,6 +55,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_
+ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA)  += spi-pxa2xx-dma.o
+ obj-$(CONFIG_SPI_PXA2XX)              += spi-pxa2xx-platform.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)          += spi-pxa2xx-pci.o
++obj-$(CONFIG_SPI_RB4XX)                       += spi-rb4xx.o
+ obj-$(CONFIG_SPI_RSPI)                        += spi-rspi.o
+ obj-$(CONFIG_SPI_S3C24XX)             += spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y                      := spi-s3c24xx.o

diff --git a/target/linux/ar71xx/patches-3.10/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-3.10/433-spi-rb4xx-cpld-driver.patch
new file mode 100644 (file)
index 0000000..ceff740
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/433-spi-rb4xx-cpld-driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -546,6 +546,13 @@ config SPI_TLE62X0
+         sysfs interface, with each line presented as a kind of GPIO
+         exposing both switch control and diagnostic feedback.
+ 
++config SPI_RB4XX_CPLD
++      tristate "MikroTik RB4XX CPLD driver"
++      depends on ATH79_MACH_RB4XX
++      help
++        SPI driver for the Xilinx CPLD chip present on the
++        MikroTik RB4xx boards.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -56,6 +56,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_
+ obj-$(CONFIG_SPI_PXA2XX)              += spi-pxa2xx-platform.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)          += spi-pxa2xx-pci.o
+ obj-$(CONFIG_SPI_RB4XX)                       += spi-rb4xx.o
++obj-$(CONFIG_SPI_RB4XX_CPLD)          += spi-rb4xx-cpld.o
+ obj-$(CONFIG_SPI_RSPI)                        += spi-rspi.o
+ obj-$(CONFIG_SPI_S3C24XX)             += spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y                      := spi-s3c24xx.o

diff --git a/target/linux/ar71xx/patches-3.10/434-spi-ap83_spi_controller.patch b/target/linux/ar71xx/patches-3.10/434-spi-ap83_spi_controller.patch
new file mode 100644 (file)
index 0000000..37b52e0
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/434-spi-ap83_spi_controller.patch
@@ -0,0 +1,27 @@
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_SPIDEV)             += spidev.o
+ # SPI master controller drivers (bus)
+ obj-$(CONFIG_SPI_ALTERA)              += spi-altera.o
+ obj-$(CONFIG_SPI_ATMEL)                       += spi-atmel.o
++obj-$(CONFIG_SPI_AP83)                        += spi-ap83.o
+ obj-$(CONFIG_SPI_ATH79)                       += spi-ath79.o
+ obj-$(CONFIG_SPI_AU1550)              += spi-au1550.o
+ obj-$(CONFIG_SPI_BCM2835)             += spi-bcm2835.o
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -60,6 +60,14 @@ config SPI_ALTERA
+       help
+         This is the driver for the Altera SPI Controller.
+ 
++config SPI_AP83
++      tristate "Atheros AP83 specific SPI Controller"
++      depends on SPI_MASTER && ATH79_MACH_AP83
++      select SPI_BITBANG
++      help
++        This is a specific SPI controller driver for the Atheros AP83
++        reference board.
++
+ config SPI_ATH79
+       tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
+       depends on ATH79 && GPIOLIB

diff --git a/target/linux/ar71xx/patches-3.10/435-spi-vsc7385_driver.patch b/target/linux/ar71xx/patches-3.10/435-spi-vsc7385_driver.patch
new file mode 100644 (file)
index 0000000..61385a1
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/435-spi-vsc7385_driver.patch
@@ -0,0 +1,23 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -561,6 +561,11 @@ config SPI_RB4XX_CPLD
+         SPI driver for the Xilinx CPLD chip present on the
+         MikroTik RB4xx boards.
+ 
++config SPI_VSC7385
++      tristate "Vitesse VSC7385 ethernet switch driver"
++      help
++        SPI driver for the Vitesse VSC7385 ethernet switch.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -76,5 +76,6 @@ obj-$(CONFIG_SPI_TI_SSP)             += spi-ti-ssp.
+ obj-$(CONFIG_SPI_TLE62X0)             += spi-tle62x0.o
+ obj-$(CONFIG_SPI_TOPCLIFF_PCH)                += spi-topcliff-pch.o
+ obj-$(CONFIG_SPI_TXX9)                        += spi-txx9.o
++obj-$(CONFIG_SPI_VSC7385)             += spi-vsc7385.o
+ obj-$(CONFIG_SPI_XCOMM)               += spi-xcomm.o
+ obj-$(CONFIG_SPI_XILINX)              += spi-xilinx.o

diff --git a/target/linux/ar71xx/patches-3.10/440-leds-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-3.10/440-leds-wndr3700-usb-led-driver.patch
new file mode 100644 (file)
index 0000000..3b4e4a5
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/440-leds-wndr3700-usb-led-driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -479,6 +479,13 @@ config LEDS_BLINKM
+         This option enables support for the BlinkM RGB LED connected
+         through I2C. Say Y to enable support for the BlinkM LED.
+ 
++config LEDS_WNDR3700_USB
++      tristate "NETGEAR WNDR3700 USB LED driver"
++      depends on LEDS_CLASS && ATH79_MACH_WNDR3700
++      help
++        This option enables support for the USB LED found on the
++        NETGEAR WNDR3700 board.
++
+ comment "LED Triggers"
+ source "drivers/leds/trigger/Kconfig"
+ 
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -40,6 +40,7 @@ obj-$(CONFIG_LEDS_DA9052)            += leds-da905
+ obj-$(CONFIG_LEDS_WM831X_STATUS)      += leds-wm831x-status.o
+ obj-$(CONFIG_LEDS_WM8350)             += leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM)                        += leds-pwm.o
++obj-${CONFIG_LEDS_WNDR3700_USB}               += leds-wndr3700-usb.o
+ obj-$(CONFIG_LEDS_REGULATOR)          += leds-regulator.o
+ obj-$(CONFIG_LEDS_INTEL_SS4200)               += leds-ss4200.o
+ obj-$(CONFIG_LEDS_LT3593)             += leds-lt3593.o

diff --git a/target/linux/ar71xx/patches-3.10/441-leds-rb750-led-driver.patch b/target/linux/ar71xx/patches-3.10/441-leds-rb750-led-driver.patch
new file mode 100644 (file)
index 0000000..8c3652b
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/441-leds-rb750-led-driver.patch
@@ -0,0 +1,23 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -486,6 +486,10 @@ config LEDS_WNDR3700_USB
+         This option enables support for the USB LED found on the
+         NETGEAR WNDR3700 board.
+ 
++config LEDS_RB750
++      tristate "LED driver for the Mikrotik RouterBOARD 750"
++      depends on LEDS_CLASS && ATH79_MACH_RB750
++
+ comment "LED Triggers"
+ source "drivers/leds/trigger/Kconfig"
+ 
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -47,6 +47,7 @@ obj-$(CONFIG_LEDS_LT3593)            += leds-lt359
+ obj-$(CONFIG_LEDS_ADP5520)            += leds-adp5520.o
+ obj-$(CONFIG_LEDS_DELL_NETBOOKS)      += dell-led.o
+ obj-$(CONFIG_LEDS_MC13783)            += leds-mc13783.o
++obj-$(CONFIG_LEDS_RB750)              += leds-rb750.o
+ obj-$(CONFIG_LEDS_NS2)                        += leds-ns2.o
+ obj-$(CONFIG_LEDS_NETXBIG)            += leds-netxbig.o
+ obj-$(CONFIG_LEDS_ASIC3)              += leds-asic3.o

diff --git a/target/linux/ar71xx/patches-3.10/450-gpio-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-3.10/450-gpio-nxp-74hc153-gpio-chip-driver.patch
new file mode 100644 (file)
index 0000000..eb13b87
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/450-gpio-nxp-74hc153-gpio-chip-driver.patch
@@ -0,0 +1,25 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -717,4 +717,12 @@ config GPIO_VIPERBOARD
+           River Tech's viperboard.h for detailed meaning
+           of the module parameters.
+ 
++comment "Other GPIO expanders"
++
++config GPIO_NXP_74HC153
++      tristate "NXP 74HC153 Dual 4-input multiplexer"
++      help
++        Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
++        provides a GPIO interface supporting input mode only.
++
+ endif
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -50,6 +50,7 @@ obj-$(CONFIG_GPIO_MSM_V2)    += gpio-msm-v2
+ obj-$(CONFIG_GPIO_MVEBU)        += gpio-mvebu.o
+ obj-$(CONFIG_GPIO_MXC)                += gpio-mxc.o
+ obj-$(CONFIG_GPIO_MXS)                += gpio-mxs.o
++obj-$(CONFIG_GPIO_NXP_74HC153)        += gpio-nxp-74hc153.o
+ obj-$(CONFIG_ARCH_OMAP)               += gpio-omap.o
+ obj-$(CONFIG_GPIO_PCA953X)    += gpio-pca953x.o
+ obj-$(CONFIG_GPIO_PCF857X)    += gpio-pcf857x.o

diff --git a/target/linux/ar71xx/patches-3.10/460-spi-bitbang-export-spi_bitbang_bufs.patch b/target/linux/ar71xx/patches-3.10/460-spi-bitbang-export-spi_bitbang_bufs.patch
new file mode 100644 (file)
index 0000000..919b85c
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/460-spi-bitbang-export-spi_bitbang_bufs.patch
@@ -0,0 +1,28 @@
+--- a/drivers/spi/spi-bitbang.c
++++ b/drivers/spi/spi-bitbang.c
+@@ -234,13 +234,14 @@ void spi_bitbang_cleanup(struct spi_devi
+ }
+ EXPORT_SYMBOL_GPL(spi_bitbang_cleanup);
+ 
+-static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
++int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
+ {
+       struct spi_bitbang_cs   *cs = spi->controller_state;
+       unsigned                nsecs = cs->nsecs;
+ 
+       return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t);
+ }
++EXPORT_SYMBOL_GPL(spi_bitbang_bufs);
+ 
+ /*----------------------------------------------------------------------*/
+ 
+--- a/include/linux/spi/spi_bitbang.h
++++ b/include/linux/spi/spi_bitbang.h
+@@ -44,6 +44,7 @@ extern void spi_bitbang_cleanup(struct s
+ extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
+ extern int spi_bitbang_setup_transfer(struct spi_device *spi,
+                                     struct spi_transfer *t);
++extern int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t);
+ 
+ /* start or stop queue processing */
+ extern int spi_bitbang_start(struct spi_bitbang *spi);

diff --git a/target/linux/ar71xx/patches-3.10/461-spi-add-type-field-to-spi_transfer.patch b/target/linux/ar71xx/patches-3.10/461-spi-add-type-field-to-spi_transfer.patch
new file mode 100644 (file)
index 0000000..c99ff1b
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/461-spi-add-type-field-to-spi_transfer.patch
@@ -0,0 +1,23 @@
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -422,6 +422,12 @@ extern struct spi_master *spi_busnum_to_
+ 
+ /*---------------------------------------------------------------------------*/
+ 
++enum spi_transfer_type {
++      SPI_TRANSFER_GENERIC = 0,
++      SPI_TRANSFER_FLASH_READ_CMD,
++      SPI_TRANSFER_FLASH_READ_DATA,
++};
++
+ /*
+  * I/O INTERFACE between SPI controller and protocol drivers
+  *
+@@ -524,6 +530,7 @@ struct spi_transfer {
+       u8              bits_per_word;
+       u16             delay_usecs;
+       u32             speed_hz;
++      enum spi_transfer_type type;
+ 
+       struct list_head transfer_list;
+ };

diff --git a/target/linux/ar71xx/patches-3.10/462-mtd-m25p80-set-spi-transfer-type.patch b/target/linux/ar71xx/patches-3.10/462-mtd-m25p80-set-spi-transfer-type.patch
new file mode 100644 (file)
index 0000000..e1ceb66
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/462-mtd-m25p80-set-spi-transfer-type.patch
@@ -0,0 +1,15 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -357,10 +357,12 @@ static int m25p80_read(struct mtd_info *
+        * OPCODE_FAST_READ (if available) is faster.
+        * Should add 1 byte DUMMY_BYTE.
+        */
++      t[0].type = SPI_TRANSFER_FLASH_READ_CMD;
+       t[0].tx_buf = flash->command;
+       t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0);
+       spi_message_add_tail(&t[0], &m);
+ 
++      t[1].type = SPI_TRANSFER_FLASH_READ_DATA;
+       spi_message_add_tail(&t[1], &m);
+ 
+       mutex_lock(&flash->lock);

diff --git a/target/linux/ar71xx/patches-3.10/463-spi-ath79-add-fast-flash-read.patch b/target/linux/ar71xx/patches-3.10/463-spi-ath79-add-fast-flash-read.patch
new file mode 100644 (file)
index 0000000..e861644
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/463-spi-ath79-add-fast-flash-read.patch
@@ -0,0 +1,185 @@
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -37,6 +37,11 @@
+ 
+ #define ATH79_SPI_CS_LINE_MAX         2
+ 
++enum ath79_spi_state {
++      ATH79_SPI_STATE_WAIT_CMD = 0,
++      ATH79_SPI_STATE_WAIT_READ,
++};
++
+ struct ath79_spi {
+       struct spi_bitbang      bitbang;
+       u32                     ioc_base;
+@@ -44,6 +49,11 @@ struct ath79_spi {
+       void __iomem            *base;
+       struct clk              *clk;
+       unsigned                rrw_delay;
++
++      enum ath79_spi_state    state;
++      u32                     clk_div;
++      unsigned long           read_addr;
++      unsigned long           ahb_rate;
+ };
+ 
+ static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
+@@ -111,9 +121,6 @@ static void ath79_spi_enable(struct ath7
+       /* save CTRL register */
+       sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL);
+       sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC);
+-
+-      /* TODO: setup speed? */
+-      ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
+ }
+ 
+ static void ath79_spi_disable(struct ath79_spi *sp)
+@@ -232,6 +239,110 @@ static u32 ath79_spi_txrx_mode0(struct s
+       return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
+ }
+ 
++static int ath79_spi_do_read_flash_data(struct spi_device *spi,
++                                      struct spi_transfer *t)
++{
++      struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++
++      /* disable GPIO mode */
++      ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
++
++      memcpy_fromio(t->rx_buf, sp->base + sp->read_addr, t->len);
++
++      /* enable GPIO mode */
++      ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
++
++      /* restore IOC register */
++      ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
++
++      return t->len;
++}
++
++static int ath79_spi_do_read_flash_cmd(struct spi_device *spi,
++                                     struct spi_transfer *t)
++{
++      struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++      int len;
++      const u8 *p;
++
++      sp->read_addr = 0;
++
++      len = t->len - 1;
++      p = t->tx_buf;
++
++      while (len--) {
++              p++;
++              sp->read_addr <<= 8;
++              sp->read_addr |= *p;
++      }
++
++      return t->len;
++}
++
++static bool ath79_spi_is_read_cmd(struct spi_device *spi,
++                               struct spi_transfer *t)
++{
++      return t->type == SPI_TRANSFER_FLASH_READ_CMD;
++}
++
++static bool ath79_spi_is_data_read(struct spi_device *spi,
++                                struct spi_transfer *t)
++{
++      return t->type == SPI_TRANSFER_FLASH_READ_DATA;
++}
++
++static int ath79_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
++{
++      struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++      int ret;
++
++      switch (sp->state) {
++      case ATH79_SPI_STATE_WAIT_CMD:
++              if (ath79_spi_is_read_cmd(spi, t)) {
++                      ret = ath79_spi_do_read_flash_cmd(spi, t);
++                      sp->state = ATH79_SPI_STATE_WAIT_READ;
++              } else {
++                      ret = spi_bitbang_bufs(spi, t);
++              }
++              break;
++
++      case ATH79_SPI_STATE_WAIT_READ:
++              if (ath79_spi_is_data_read(spi, t)) {
++                      ret = ath79_spi_do_read_flash_data(spi, t);
++              } else {
++                      dev_warn(&spi->dev, "flash data read expected\n");
++                      ret = -EIO;
++              }
++              sp->state = ATH79_SPI_STATE_WAIT_CMD;
++              break;
++
++      default:
++              BUG();
++      }
++
++      return ret;
++}
++
++static int ath79_spi_setup_transfer(struct spi_device *spi,
++                                  struct spi_transfer *t)
++{
++      struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++      struct ath79_spi_controller_data *cdata;
++      int ret;
++
++      ret = spi_bitbang_setup_transfer(spi, t);
++      if (ret)
++              return ret;
++
++      cdata = spi->controller_data;
++      if (cdata->is_flash)
++              sp->bitbang.txrx_bufs = ath79_spi_txrx_bufs;
++      else
++              sp->bitbang.txrx_bufs = spi_bitbang_bufs;
++
++      return ret;
++}
++
+ static int ath79_spi_probe(struct platform_device *pdev)
+ {
+       struct spi_master *master;
+@@ -254,6 +365,8 @@ static int ath79_spi_probe(struct platfo
+       sp = spi_master_get_devdata(master);
+       platform_set_drvdata(pdev, sp);
+ 
++      sp->state = ATH79_SPI_STATE_WAIT_CMD;
++
+       master->setup = ath79_spi_setup;
+       master->cleanup = ath79_spi_cleanup;
+       master->bus_num = pdata->bus_num;
+@@ -262,7 +375,7 @@ static int ath79_spi_probe(struct platfo
+       sp->bitbang.master = spi_master_get(master);
+       sp->bitbang.chipselect = ath79_spi_chipselect;
+       sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0;
+-      sp->bitbang.setup_transfer = spi_bitbang_setup_transfer;
++      sp->bitbang.setup_transfer = ath79_spi_setup_transfer;
+       sp->bitbang.flags = SPI_CS_HIGH;
+ 
+       r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+@@ -287,7 +400,8 @@ static int ath79_spi_probe(struct platfo
+       if (ret)
+               goto err_clk_put;
+ 
+-      rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
++      sp->ahb_rate = clk_get_rate(sp->clk);
++      rate = DIV_ROUND_UP(sp->ahb_rate, MHZ);
+       if (!rate) {
+               ret = -EINVAL;
+               goto err_clk_disable;
+--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+@@ -24,6 +24,7 @@ enum ath79_spi_cs_type {
+ struct ath79_spi_controller_data {
+       enum ath79_spi_cs_type cs_type;
+       unsigned cs_line;
++      bool is_flash;
+ };
+ 
+ #endif /* _ATH79_SPI_PLATFORM_H */

diff --git a/target/linux/ar71xx/patches-3.10/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ar71xx/patches-3.10/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
new file mode 100644 (file)
index 0000000..520c652
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
@@ -0,0 +1,111 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
+@@ -0,0 +1,37 @@
++/*
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
++ *      Copyright (C) 2003, 2004 Ralf Baechle
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
++#define __ASM_MACH_ATH79_MANGLE_PORT_H
++
++#ifdef CONFIG_PCI
++extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
++extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
++#else
++#define ath79_pci_swizzle_b(port) (port)
++#define ath79_pci_swizzle_w(port) (port)
++#endif
++
++#define __swizzle_addr_b(port)        ath79_pci_swizzle_b(port)
++#define __swizzle_addr_w(port)        ath79_pci_swizzle_w(port)
++#define __swizzle_addr_l(port)        (port)
++#define __swizzle_addr_q(port)        (port)
++
++# define ioswabb(a, x)           (x)
++# define __mem_ioswabb(a, x)     (x)
++# define ioswabw(a, x)           (x)
++# define __mem_ioswabw(a, x)     cpu_to_le16(x)
++# define ioswabl(a, x)           (x)
++# define __mem_ioswabl(a, x)     cpu_to_le32(x)
++# define ioswabq(a, x)           (x)
++# define __mem_ioswabq(a, x)     cpu_to_le64(x)
++
++#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -13,6 +13,7 @@
+  */
+ 
+ #include <linux/init.h>
++#include <linux/export.h>
+ #include <linux/pci.h>
+ #include <linux/resource.h>
+ #include <linux/platform_device.h>
+@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(st
+ static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
+ static unsigned ath79_pci_nr_irqs __initdata;
+ 
++static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
++static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
++
+ static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
+       {
+               .slot   = 17,
+@@ -212,12 +216,50 @@ ath79_register_pci_ar724x(int id,
+       return pdev;
+ }
+ 
++static inline bool ar71xx_is_pci_addr(unsigned long port)
++{
++      unsigned long phys = CPHYSADDR(port);
++
++      return (phys >= AR71XX_PCI_MEM_BASE &&
++              phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
++}
++
++static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
++{
++      return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
++}
++
++static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
++{
++      return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
++}
++
++unsigned long ath79_pci_swizzle_b(unsigned long port)
++{
++      if (__ath79_pci_swizzle_b)
++              return __ath79_pci_swizzle_b(port);
++
++      return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_b);
++
++unsigned long ath79_pci_swizzle_w(unsigned long port)
++{
++      if (__ath79_pci_swizzle_w)
++              return __ath79_pci_swizzle_w(port);
++
++      return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_w);
++
+ int __init ath79_register_pci(void)
+ {
+       struct platform_device *pdev = NULL;
+ 
+       if (soc_is_ar71xx()) {
+               pdev = ath79_register_pci_ar71xx();
++              __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
++              __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
+       } else if (soc_is_ar724x()) {
+               pdev = ath79_register_pci_ar724x(-1,
+                                                AR724X_PCI_CFG_BASE,

diff --git a/target/linux/ar71xx/patches-3.10/480-ar913x_wmac_external_reset.patch b/target/linux/ar71xx/patches-3.10/480-ar913x_wmac_external_reset.patch
new file mode 100644 (file)
index 0000000..9b704a3
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/480-ar913x_wmac_external_reset.patch
@@ -0,0 +1,31 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -44,7 +44,7 @@ static struct platform_device ath79_wmac
+       },
+ };
+ 
+-static void __init ar913x_wmac_setup(void)
++static int ar913x_wmac_reset(void)
+ {
+       /* reset the WMAC */
+       ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
+@@ -53,10 +53,19 @@ static void __init ar913x_wmac_setup(voi
+       ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
+       mdelay(10);
+ 
++      return 0;
++}
++
++static void __init ar913x_wmac_setup(void)
++{
++      ar913x_wmac_reset();
++
+       ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
+       ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
+       ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
+       ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
++
++      ath79_wmac_data.external_reset = ar913x_wmac_reset;
+ }
+ 
+ 

diff --git a/target/linux/ar71xx/patches-3.10/490-usb-ehci-add-quirks-for-qca-socs.patch b/target/linux/ar71xx/patches-3.10/490-usb-ehci-add-quirks-for-qca-socs.patch
new file mode 100644 (file)
index 0000000..d22528b
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/490-usb-ehci-add-quirks-for-qca-socs.patch
@@ -0,0 +1,101 @@
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -249,6 +249,37 @@ static int ehci_reset (struct ehci_hcd *
+       command |= CMD_RESET;
+       dbg_cmd (ehci, "reset", command);
+       ehci_writel(ehci, command, &ehci->regs->command);
++
++      if (ehci->qca_force_host_mode) {
++              u32 usbmode;
++
++              udelay(1000);
++
++              usbmode = ehci_readl(ehci, &ehci->regs->usbmode);
++              usbmode |= USBMODE_CM_HC | (1 << 4);
++              ehci_writel(ehci, usbmode, &ehci->regs->usbmode);
++
++              ehci_dbg(ehci, "forced host mode, usbmode: %08x\n",
++                       ehci_readl(ehci, &ehci->regs->usbmode));
++      }
++
++      if (ehci->qca_force_16bit_ptw) {
++              u32 port_status;
++
++              udelay(1000);
++
++              /* enable 16-bit UTMI interface */
++              port_status = ehci_readl(ehci, &ehci->regs->port_status[0]);
++              port_status |= BIT(28);
++              ehci_writel(ehci, port_status, &ehci->regs->port_status[0]);
++
++              ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n",
++                       ehci_readl(ehci, &ehci->regs->port_status[0]));
++      }
++
++      if (ehci->reset_notifier)
++              ehci->reset_notifier(ehci_to_hcd(ehci));
++
+       ehci->rh_state = EHCI_RH_HALTED;
+       ehci->next_statechange = jiffies;
+       retval = handshake (ehci, &ehci->regs->command,
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -201,6 +201,10 @@ struct ehci_hcd {                 /* one per controlle
+       unsigned                frame_index_bug:1; /* MosChip (AKA NetMos) */
+       unsigned                need_oc_pp_cycle:1; /* MPC834X port power */
+       unsigned                ignore_oc:1;
++      unsigned                qca_force_host_mode:1;
++      unsigned                qca_force_16bit_ptw:1; /* force 16 bit UTMI */
++
++      void (*reset_notifier)(struct usb_hcd *hcd);
+ 
+       /* required for usb32 quirk */
+       #define OHCI_CTRL_HCFS          (3 << 6)
+--- a/include/linux/usb/ehci_pdriver.h
++++ b/include/linux/usb/ehci_pdriver.h
+@@ -43,6 +43,8 @@ struct usb_ehci_pdata {
+       unsigned        big_endian_mmio:1;
+       unsigned        no_io_watchdog:1;
+       unsigned        ignore_oc:1;
++      unsigned        qca_force_host_mode:1;
++      unsigned        qca_force_16bit_ptw:1;
+ 
+       /* Turn on all power and clocks */
+       int (*power_on)(struct platform_device *pdev);
+@@ -51,6 +53,7 @@ struct usb_ehci_pdata {
+       /* Turn on only VBUS suspend power and hotplug detection,
+        * turn off everything else */
+       void (*power_suspend)(struct platform_device *pdev);
++      void (*reset_notifier)(struct platform_device *pdev);
+ };
+ 
+ #endif /* __USB_CORE_EHCI_PDRIVER_H */
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -36,6 +36,14 @@
+ 
+ static const char hcd_name[] = "ehci-platform";
+ 
++static void ehci_platform_reset_notifier(struct usb_hcd *hcd)
++{
++      struct platform_device *pdev = to_platform_device(hcd->self.controller);
++      struct usb_ehci_pdata *pdata = pdev->dev.platform_data;
++
++      pdata->reset_notifier(pdev);
++}
++
+ static int ehci_platform_reset(struct usb_hcd *hcd)
+ {
+       struct platform_device *pdev = to_platform_device(hcd->self.controller);
+@@ -48,6 +56,11 @@ static int ehci_platform_reset(struct us
+       ehci->big_endian_desc = pdata->big_endian_desc;
+       ehci->big_endian_mmio = pdata->big_endian_mmio;
+       ehci->ignore_oc = pdata->ignore_oc;
++      ehci->qca_force_host_mode = pdata->qca_force_host_mode;
++      ehci->qca_force_16bit_ptw = pdata->qca_force_16bit_ptw;
++
++      if (pdata->reset_notifier)
++              ehci->reset_notifier = ehci_platform_reset_notifier;
+ 
+       ehci->caps = hcd->regs + pdata->caps_offset;
+       retval = ehci_setup(hcd);

diff --git a/target/linux/ar71xx/patches-3.10/500-MIPS-fw-myloader.patch b/target/linux/ar71xx/patches-3.10/500-MIPS-fw-myloader.patch
new file mode 100644 (file)
index 0000000..999b466
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/500-MIPS-fw-myloader.patch
@@ -0,0 +1,22 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -183,6 +183,7 @@ endif
+ #
+ libs-$(CONFIG_FW_ARC)         += arch/mips/fw/arc/
+ libs-$(CONFIG_FW_CFE)         += arch/mips/fw/cfe/
++libs-$(CONFIG_MYLOADER)               += arch/mips/fw/myloader/
+ libs-$(CONFIG_FW_SNIPROM)     += arch/mips/fw/sni/
+ libs-y                                += arch/mips/fw/lib/
+ 
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -993,6 +993,9 @@ config MIPS_MSC
+ config MIPS_NILE4
+       bool
+ 
++config MYLOADER
++      bool
++
+ config SYNC_R4K
+       bool
+ 

diff --git a/target/linux/ar71xx/patches-3.10/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch b/target/linux/ar71xx/patches-3.10/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch
new file mode 100644 (file)
index 0000000..d9b8682
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch
@@ -0,0 +1,81 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -15,6 +15,7 @@
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/irq.h>
++#include <linux/etherdevice.h>
+ #include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
+ 
+@@ -22,6 +23,7 @@
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include "dev-wmac.h"
+ 
++static u8 ath79_wmac_mac[ETH_ALEN];
+ static struct ath9k_platform_data ath79_wmac_data;
+ 
+ static struct resource ath79_wmac_resources[] = {
+@@ -160,7 +162,7 @@ static void qca955x_wmac_setup(void)
+               ath79_wmac_data.is_clk_25mhz = true;
+ }
+ 
+-void __init ath79_register_wmac(u8 *cal_data)
++void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+       if (soc_is_ar913x())
+               ar913x_wmac_setup();
+@@ -177,5 +179,10 @@ void __init ath79_register_wmac(u8 *cal_
+               memcpy(ath79_wmac_data.eeprom_data, cal_data,
+                      sizeof(ath79_wmac_data.eeprom_data));
+ 
++      if (mac_addr) {
++              memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac));
++              ath79_wmac_data.macaddr = ath79_wmac_mac;
++      }
++
+       platform_device_register(&ath79_wmac_device);
+ }
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -12,6 +12,6 @@
+ #ifndef _ATH79_DEV_WMAC_H
+ #define _ATH79_DEV_WMAC_H
+ 
+-void ath79_register_wmac(u8 *cal_data);
++void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
+ 
+ #endif /* _ATH79_DEV_WMAC_H */
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -98,7 +98,7 @@ static void __init ap81_setup(void)
+                                       ap81_gpio_keys);
+       ath79_register_spi(&ap81_spi_data, ap81_spi_info,
+                          ARRAY_SIZE(ap81_spi_info));
+-      ath79_register_wmac(cal_data);
++      ath79_register_wmac(cal_data, NULL);
+       ath79_register_usb();
+ }
+ 
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -134,7 +134,7 @@ static void __init db120_setup(void)
+       ath79_register_spi(&db120_spi_data, db120_spi_info,
+                          ARRAY_SIZE(db120_spi_info));
+       ath79_register_usb();
+-      ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
++      ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
+       db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
+ }
+ 
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -91,7 +91,7 @@ static void __init ap121_setup(void)
+       ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+                          ARRAY_SIZE(ap121_spi_info));
+       ath79_register_usb();
+-      ath79_register_wmac(cal_data);
++      ath79_register_wmac(cal_data, NULL);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",

diff --git a/target/linux/ar71xx/patches-3.10/502-MIPS-ath79-export-ath79_gpio_base.patch b/target/linux/ar71xx/patches-3.10/502-MIPS-ath79-export-ath79_gpio_base.patch
new file mode 100644 (file)
index 0000000..73eb8e1
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/502-MIPS-ath79-export-ath79_gpio_base.patch
@@ -0,0 +1,23 @@
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -25,7 +25,9 @@
+ #include <asm/mach-ath79/ath79.h>
+ #include "common.h"
+ 
+-static void __iomem *ath79_gpio_base;
++void __iomem *ath79_gpio_base;
++EXPORT_SYMBOL_GPL(ath79_gpio_base);
++
+ static unsigned long ath79_gpio_count;
+ static DEFINE_SPINLOCK(ath79_gpio_lock);
+ 
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -116,6 +116,7 @@ static inline int soc_is_qca955x(void)
+ }
+ 
+ extern void __iomem *ath79_ddr_base;
++extern void __iomem *ath79_gpio_base;
+ extern void __iomem *ath79_pll_base;
+ extern void __iomem *ath79_reset_base;
+ 

diff --git a/target/linux/ar71xx/patches-3.10/503-MIPS-ath79-add-flash-acquire-release.patch b/target/linux/ar71xx/patches-3.10/503-MIPS-ath79-add-flash-acquire-release.patch
new file mode 100644 (file)
index 0000000..06f7902
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/503-MIPS-ath79-add-flash-acquire-release.patch
@@ -0,0 +1,37 @@
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -22,6 +22,7 @@
+ #include "common.h"
+ 
+ static DEFINE_SPINLOCK(ath79_device_reset_lock);
++static DEFINE_MUTEX(ath79_flash_mutex);
+ 
+ u32 ath79_cpu_freq;
+ EXPORT_SYMBOL_GPL(ath79_cpu_freq);
+@@ -111,3 +112,16 @@ void ath79_device_reset_clear(u32 mask)
+       spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
+ }
+ EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
++
++void ath79_flash_acquire(void)
++{
++      mutex_lock(&ath79_flash_mutex);
++}
++EXPORT_SYMBOL_GPL(ath79_flash_acquire);
++
++void ath79_flash_release(void)
++{
++      mutex_unlock(&ath79_flash_mutex);
++}
++EXPORT_SYMBOL_GPL(ath79_flash_release);
++
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -143,4 +143,7 @@ static inline u32 ath79_reset_rr(unsigne
+ void ath79_device_reset_set(u32 mask);
+ void ath79_device_reset_clear(u32 mask);
+ 
++void ath79_flash_acquire(void);
++void ath79_flash_release(void);
++
+ #endif /* __ASM_MACH_ATH79_H */

diff --git a/target/linux/ar71xx/patches-3.10/504-MIPS-ath79-add-ath79_device_reset_get.patch b/target/linux/ar71xx/patches-3.10/504-MIPS-ath79-add-ath79_device_reset_get.patch
new file mode 100644 (file)
index 0000000..024a85d
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/504-MIPS-ath79-add-ath79_device_reset_get.patch
@@ -0,0 +1,45 @@
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -142,6 +142,7 @@ static inline u32 ath79_reset_rr(unsigne
+ 
+ void ath79_device_reset_set(u32 mask);
+ void ath79_device_reset_clear(u32 mask);
++u32 ath79_device_reset_get(u32 mask);
+ 
+ void ath79_flash_acquire(void);
+ void ath79_flash_release(void);
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -113,6 +113,32 @@ void ath79_device_reset_clear(u32 mask)
+ }
+ EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
+ 
++u32 ath79_device_reset_get(u32 mask)
++{
++      unsigned long flags;
++      u32 reg;
++      u32 ret;
++
++      if (soc_is_ar71xx())
++              reg = AR71XX_RESET_REG_RESET_MODULE;
++      else if (soc_is_ar724x())
++              reg = AR724X_RESET_REG_RESET_MODULE;
++      else if (soc_is_ar913x())
++              reg = AR913X_RESET_REG_RESET_MODULE;
++      else if (soc_is_ar933x())
++              reg = AR933X_RESET_REG_RESET_MODULE;
++      else if (soc_is_ar934x())
++              reg = AR934X_RESET_REG_RESET_MODULE;
++      else
++              BUG();
++
++      spin_lock_irqsave(&ath79_device_reset_lock, flags);
++      ret = ath79_reset_rr(reg);
++      spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
++      return ret;
++}
++EXPORT_SYMBOL_GPL(ath79_device_reset_get);
++
+ void ath79_flash_acquire(void)
+ {
+       mutex_lock(&ath79_flash_mutex);

diff --git a/target/linux/ar71xx/patches-3.10/505-MIPS-ath79-add-ath79_gpio_function_select.patch b/target/linux/ar71xx/patches-3.10/505-MIPS-ath79-add-ath79_gpio_function_select.patch
new file mode 100644 (file)
index 0000000..9e11381
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/505-MIPS-ath79-add-ath79_gpio_function_select.patch
@@ -0,0 +1,47 @@
+--- a/arch/mips/ath79/common.h
++++ b/arch/mips/ath79/common.h
+@@ -26,6 +26,7 @@ void ath79_ddr_wb_flush(unsigned int reg
+ void ath79_gpio_function_enable(u32 mask);
+ void ath79_gpio_function_disable(u32 mask);
+ void ath79_gpio_function_setup(u32 set, u32 clear);
++void ath79_gpio_output_select(unsigned gpio, u8 val);
+ void ath79_gpio_init(void);
+ 
+ #endif /* __ATH79_COMMON_H */
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -180,6 +180,34 @@ void ath79_gpio_function_disable(u32 mas
+       ath79_gpio_function_setup(0, mask);
+ }
+ 
++void __init ath79_gpio_output_select(unsigned gpio, u8 val)
++{
++      void __iomem *base = ath79_gpio_base;
++      unsigned long flags;
++      unsigned int reg;
++      u32 t, s;
++
++      BUG_ON(!soc_is_ar934x());
++
++      if (gpio >= AR934X_GPIO_COUNT)
++              return;
++
++      reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4);
++      s = 8 * (gpio % 4);
++
++      spin_lock_irqsave(&ath79_gpio_lock, flags);
++
++      t = __raw_readl(base + reg);
++      t &= ~(0xff << s);
++      t |= val << s;
++      __raw_writel(t, base + reg);
++
++      /* flush write */
++      (void) __raw_readl(base + reg);
++
++      spin_unlock_irqrestore(&ath79_gpio_lock, flags);
++}
++
+ void __init ath79_gpio_init(void)
+ {
+       int err;

diff --git a/target/linux/ar71xx/patches-3.10/506-MIPS-ath79-prom-parse-redboot-args.patch b/target/linux/ar71xx/patches-3.10/506-MIPS-ath79-prom-parse-redboot-args.patch
new file mode 100644 (file)
index 0000000..aab959b
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/506-MIPS-ath79-prom-parse-redboot-args.patch
@@ -0,0 +1,86 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -19,6 +19,8 @@
+ 
+ #include "common.h"
+ 
++static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata;
++
+ static inline int is_valid_ram_addr(void *addr)
+ {
+       if (((u32) addr > KSEG0) &&
+@@ -32,6 +34,41 @@ static inline int is_valid_ram_addr(void
+       return 0;
+ }
+ 
++static void __init ath79_prom_append_cmdline(const char *name,
++                                            const char *value)
++{
++      snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf),
++               " %s=%s", name, value);
++      strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
++}
++
++static const char * __init ath79_prom_find_env(char **envp, const char *name)
++{
++      const char *ret = NULL;
++      int len;
++      char **p;
++
++      if (!is_valid_ram_addr(envp))
++              return NULL;
++
++      len = strlen(name);
++      for (p = envp; is_valid_ram_addr(*p); p++) {
++              if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') {
++                      ret = *p + len + 1;
++                      break;
++              }
++
++              /* RedBoot env comes in pointer pairs - key, value */
++              if (strncmp(name, *p, len) == 0 && (*p)[len] == 0)
++                      if (is_valid_ram_addr(*(++p))) {
++                              ret = *p;
++                              break;
++                      }
++      }
++
++      return ret;
++}
++
+ static __init void ath79_prom_init_cmdline(int argc, char **argv)
+ {
+       int i;
+@@ -48,7 +85,32 @@ static __init void ath79_prom_init_cmdli
+ 
+ void __init prom_init(void)
+ {
++      const char *env;
++      char **envp;
++
+       ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
++
++      envp = (char **)fw_arg2;
++      if (!strstr(arcs_cmdline, "ethaddr=")) {
++              env = ath79_prom_find_env(envp, "ethaddr");
++              if (env)
++                      ath79_prom_append_cmdline("ethaddr", env);
++      }
++
++      if (!strstr(arcs_cmdline, "board=")) {
++              env = ath79_prom_find_env(envp, "board");
++              if (env) {
++                      /* Workaround for buggy bootloaders */
++                      if (strcmp(env, "RouterStation") == 0 ||
++                          strcmp(env, "Ubiquiti AR71xx-based board") == 0)
++                              env = "UBNT-RS";
++
++                      if (strcmp(env, "RouterStation PRO") == 0)
++                              env = "UBNT-RSPRO";
++
++                      ath79_prom_append_cmdline("board", env);
++              }
++      }
+ }
+ 
+ void __init prom_free_prom_memory(void)

diff --git a/target/linux/ar71xx/patches-3.10/507-MIPS-ath79-prom-add-myloader-support.patch b/target/linux/ar71xx/patches-3.10/507-MIPS-ath79-prom-add-myloader-support.patch
new file mode 100644 (file)
index 0000000..67c1faf
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/507-MIPS-ath79-prom-add-myloader-support.patch
@@ -0,0 +1,58 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -16,6 +16,7 @@
+ 
+ #include <asm/bootinfo.h>
+ #include <asm/addrspace.h>
++#include <asm/fw/myloader/myloader.h>
+ 
+ #include "common.h"
+ 
+@@ -69,6 +70,37 @@ static const char * __init ath79_prom_fi
+       return ret;
+ }
+ 
++static int __init ath79_prom_init_myloader(void)
++{
++      struct myloader_info *mylo;
++      char mac_buf[32];
++      unsigned char *mac;
++
++      mylo = myloader_get_info();
++      if (!mylo)
++              return 0;
++
++      switch (mylo->did) {
++      case DEVID_COMPEX_WP543:
++              ath79_prom_append_cmdline("board", "WP543");
++              break;
++      case DEVID_COMPEX_WPE72:
++              ath79_prom_append_cmdline("board", "WPE72");
++              break;
++      default:
++              pr_warn("prom: unknown device id: %x\n", mylo->did);
++              return 0;
++      }
++
++      mac = mylo->macs[0];
++      snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x",
++               mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
++
++      ath79_prom_append_cmdline("ethaddr", mac_buf);
++
++      return 1;
++}
++
+ static __init void ath79_prom_init_cmdline(int argc, char **argv)
+ {
+       int i;
+@@ -88,6 +120,9 @@ void __init prom_init(void)
+       const char *env;
+       char **envp;
+ 
++      if (ath79_prom_init_myloader())
++              return;
++
+       ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
+ 
+       envp = (char **)fw_arg2;

diff --git a/target/linux/ar71xx/patches-3.10/508-MIPS-ath79-prom-image-command-line-hack.patch b/target/linux/ar71xx/patches-3.10/508-MIPS-ath79-prom-image-command-line-hack.patch
new file mode 100644 (file)
index 0000000..72a3b56
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/508-MIPS-ath79-prom-image-command-line-hack.patch
@@ -0,0 +1,57 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -70,6 +70,35 @@ static const char * __init ath79_prom_fi
+       return ret;
+ }
+ 
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++extern char __image_cmdline[];
++
++static int __init ath79_use_image_cmdline(void)
++{
++      char *p = __image_cmdline;
++      int replace = 0;
++
++      if (*p == '-') {
++              replace = 1;
++              p++;
++      }
++
++      if (*p == '\0')
++              return 0;
++
++      if (replace) {
++              strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
++      } else {
++              strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
++              strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
++      }
++
++      return 1;
++}
++#else
++static inline int ath79_use_image_cmdline(void) { return 0; }
++#endif
++
+ static int __init ath79_prom_init_myloader(void)
+ {
+       struct myloader_info *mylo;
+@@ -98,6 +127,8 @@ static int __init ath79_prom_init_myload
+ 
+       ath79_prom_append_cmdline("ethaddr", mac_buf);
+ 
++      ath79_use_image_cmdline();
++
+       return 1;
+ }
+ 
+@@ -105,6 +136,9 @@ static __init void ath79_prom_init_cmdli
+ {
+       int i;
+ 
++      if (ath79_use_image_cmdline())
++              return;
++
+       if (!is_valid_ram_addr(argv))
+               return;
+ 

diff --git a/target/linux/ar71xx/patches-3.10/509-MIPS-ath79-process-board-kernel-option.patch b/target/linux/ar71xx/patches-3.10/509-MIPS-ath79-process-board-kernel-option.patch
new file mode 100644 (file)
index 0000000..fa6170c
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/509-MIPS-ath79-process-board-kernel-option.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -218,6 +218,8 @@ void __init plat_time_init(void)
+       mips_hpt_frequency = clk_get_rate(clk) / 2;
+ }
+ 
++__setup("board=", mips_machtype_setup);
++
+ static int __init ath79_setup(void)
+ {
+       ath79_gpio_init();

diff --git a/target/linux/ar71xx/patches-3.10/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch b/target/linux/ar71xx/patches-3.10/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch
new file mode 100644 (file)
index 0000000..2d2235e
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch
@@ -0,0 +1,14 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -24,7 +24,10 @@
+ #include "dev-wmac.h"
+ 
+ static u8 ath79_wmac_mac[ETH_ALEN];
+-static struct ath9k_platform_data ath79_wmac_data;
++
++static struct ath9k_platform_data ath79_wmac_data = {
++      .led_pin = -1,
++};
+ 
+ static struct resource ath79_wmac_resources[] = {
+       {

diff --git a/target/linux/ar71xx/patches-3.10/520-MIPS-ath79-enable-UART-function.patch b/target/linux/ar71xx/patches-3.10/520-MIPS-ath79-enable-UART-function.patch
new file mode 100644 (file)
index 0000000..1cb407f
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/520-MIPS-ath79-enable-UART-function.patch
@@ -0,0 +1,18 @@
+--- a/arch/mips/ath79/dev-common.c
++++ b/arch/mips/ath79/dev-common.c
+@@ -87,6 +87,15 @@ void __init ath79_register_uart(void)
+       if (IS_ERR(clk))
+               panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
+ 
++      if (soc_is_ar71xx())
++              ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN);
++      else if (soc_is_ar724x())
++              ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN);
++      else if (soc_is_ar913x())
++              ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN);
++      else if (soc_is_ar933x())
++              ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN);
++
+       if (soc_is_ar71xx() ||
+           soc_is_ar724x() ||
+           soc_is_ar913x() ||

diff --git a/target/linux/ar71xx/patches-3.10/521-MIPS-ath79-enable-UART-for-early_serial.patch b/target/linux/ar71xx/patches-3.10/521-MIPS-ath79-enable-UART-for-early_serial.patch
new file mode 100644 (file)
index 0000000..a6e84c5
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/521-MIPS-ath79-enable-UART-for-early_serial.patch
@@ -0,0 +1,61 @@
+--- a/arch/mips/ath79/early_printk.c
++++ b/arch/mips/ath79/early_printk.c
+@@ -56,6 +56,46 @@ static void prom_putchar_dummy(unsigned 
+       /* nothing to do */
+ }
+ 
++static void prom_enable_uart(u32 id)
++{
++      void __iomem *gpio_base;
++      u32 uart_en;
++      u32 t;
++
++      switch (id) {
++      case REV_ID_MAJOR_AR71XX:
++              uart_en = AR71XX_GPIO_FUNC_UART_EN;
++              break;
++
++      case REV_ID_MAJOR_AR7240:
++      case REV_ID_MAJOR_AR7241:
++      case REV_ID_MAJOR_AR7242:
++              uart_en = AR724X_GPIO_FUNC_UART_EN;
++              break;
++
++      case REV_ID_MAJOR_AR913X:
++              uart_en = AR913X_GPIO_FUNC_UART_EN;
++              break;
++
++      case REV_ID_MAJOR_AR9330:
++      case REV_ID_MAJOR_AR9331:
++              uart_en = AR933X_GPIO_FUNC_UART_EN;
++              break;
++
++      case REV_ID_MAJOR_AR9341:
++      case REV_ID_MAJOR_AR9342:
++      case REV_ID_MAJOR_AR9344:
++              /* TODO */
++      default:
++              return;
++      }
++
++      gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE));
++      t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC);
++      t |= uart_en;
++      __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC);
++}
++
+ static void prom_putchar_init(void)
+ {
+       void __iomem *base;
+@@ -86,8 +126,10 @@ static void prom_putchar_init(void)
+ 
+       default:
+               _prom_putchar = prom_putchar_dummy;
+-              break;
++              return;
+       }
++
++      prom_enable_uart(id);
+ }
+ 
+ void prom_putchar(unsigned char ch)

diff --git a/target/linux/ar71xx/patches-3.10/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch b/target/linux/ar71xx/patches-3.10/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch
new file mode 100644 (file)
index 0000000..74928e6
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch
@@ -0,0 +1,21 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -189,3 +189,9 @@ void __init ath79_register_wmac(u8 *cal_
+ 
+       platform_device_register(&ath79_wmac_device);
+ }
++
++void __init ath79_register_wmac_simple(void)
++{
++      ath79_register_wmac(NULL, NULL);
++      ath79_wmac_data.eeprom_name = "soc_wmac.eeprom";
++}
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -13,5 +13,6 @@
+ #define _ATH79_DEV_WMAC_H
+ 
+ void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
++void ath79_register_wmac_simple(void);
+ 
+ #endif /* _ATH79_DEV_WMAC_H */

diff --git a/target/linux/ar71xx/patches-3.10/523-MIPS-ath79-OTP-support.patch b/target/linux/ar71xx/patches-3.10/523-MIPS-ath79-OTP-support.patch
new file mode 100644 (file)
index 0000000..0672cf1
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/523-MIPS-ath79-OTP-support.patch
@@ -0,0 +1,166 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -165,6 +165,137 @@ static void qca955x_wmac_setup(void)
+               ath79_wmac_data.is_clk_25mhz = true;
+ }
+ 
++static bool __init
++ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
++{
++      int timeout = 1000;
++      u32 val;
++
++      __raw_readl(base + AR9300_OTP_BASE + (4 * addr));
++      while (timeout--) {
++              val = __raw_readl(base + AR9300_OTP_STATUS);
++              if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID)
++                      break;
++
++              udelay(10);
++      }
++
++      if (!timeout)
++              return false;
++
++      *data = __raw_readl(base + AR9300_OTP_READ_DATA);
++      return true;
++}
++
++static bool __init
++ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len)
++{
++      u32 data;
++      int i;
++
++      for (i = 0; i < len; i++) {
++              int offset = 8 * ((addr - i) % 4);
++
++              if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data))
++                      return false;
++
++              dest[i] = (data >> offset) & 0xff;
++      }
++
++      return true;
++}
++
++static bool __init
++ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest,
++                         int dest_start, int dest_len)
++{
++      int dest_bytes = 0;
++      int offset = 0;
++      int end = addr - len;
++      u8 hdr[2];
++
++      while (addr > end) {
++              if (!ar93xx_wmac_otp_read(base, addr, hdr, 2))
++                      return false;
++
++              addr -= 2;
++              offset += hdr[0];
++
++              if (offset <= dest_start + dest_len &&
++                  offset + len >= dest_start) {
++                      int data_offset = 0;
++                      int dest_offset = 0;
++                      int copy_len;
++
++                      if (offset < dest_start)
++                              data_offset = dest_start - offset;
++                      else
++                              dest_offset = offset - dest_start;
++
++                      copy_len = len - data_offset;
++                      if (copy_len > dest_len - dest_offset)
++                              copy_len = dest_len - dest_offset;
++
++                      ar93xx_wmac_otp_read(base, addr - data_offset,
++                                           dest + dest_offset,
++                                           copy_len);
++
++                      dest_bytes += copy_len;
++              }
++              addr -= hdr[1];
++      }
++      return !!dest_bytes;
++}
++
++bool __init ar93xx_wmac_read_mac_address(u8 *dest)
++{
++      void __iomem *base;
++      bool ret = false;
++      int addr = 0x1ff;
++      unsigned int len;
++      u32 hdr_u32;
++      u8 *hdr = (u8 *) &hdr_u32;
++      u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 };
++      int mac_start = 2, mac_end = 8;
++
++      BUG_ON(!soc_is_ar933x() && !soc_is_ar934x());
++      base = ioremap_nocache(AR933X_WMAC_BASE, AR933X_WMAC_SIZE);
++      while (addr > sizeof(hdr)) {
++              if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr)))
++                      break;
++
++              if (hdr_u32 == 0 || hdr_u32 == ~0)
++                      break;
++
++              len = (hdr[1] << 4) | (hdr[2] >> 4);
++              addr -= 4;
++
++              switch (hdr[0] >> 5) {
++              case 0:
++                      if (len < mac_end)
++                              break;
++
++                      ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6);
++                      ret = true;
++                      break;
++              case 3:
++                      ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac,
++                                                        mac_start, 6);
++                      break;
++              default:
++                      break;
++              }
++
++              addr -= len + 2;
++      }
++
++      iounmap(base);
++      if (ret)
++              memcpy(dest, mac, 6);
++
++      return ret;
++}
++
+ void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+       if (soc_is_ar913x())
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -14,5 +14,6 @@
+ 
+ void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
+ void ath79_register_wmac_simple(void);
++bool ar93xx_wmac_read_mac_address(u8 *dest);
+ 
+ #endif /* _ATH79_DEV_WMAC_H */
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -113,6 +113,14 @@
+ #define QCA955X_EHCI1_BASE    0x1b400000
+ #define QCA955X_EHCI_SIZE     0x1000
+ 
++#define AR9300_OTP_BASE               0x14000
++#define AR9300_OTP_STATUS     0x15f18
++#define AR9300_OTP_STATUS_TYPE                0x7
++#define AR9300_OTP_STATUS_VALID               0x4
++#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
++#define AR9300_OTP_STATUS_SM_BUSY     0x1
++#define AR9300_OTP_READ_DATA  0x15f1c
++
+ /*
+  * DDR_CTRL block
+  */

diff --git a/target/linux/ar71xx/patches-3.10/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch b/target/linux/ar71xx/patches-3.10/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch
new file mode 100644 (file)
index 0000000..7b4b6ef
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch
@@ -0,0 +1,31 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -296,6 +296,16 @@ bool __init ar93xx_wmac_read_mac_address
+       return ret;
+ }
+ 
++void __init ath79_wmac_disable_2ghz(void)
++{
++      ath79_wmac_data.disable_2ghz = true;
++}
++
++void __init ath79_wmac_disable_5ghz(void)
++{
++      ath79_wmac_data.disable_5ghz = true;
++}
++
+ void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+       if (soc_is_ar913x())
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -14,6 +14,9 @@
+ 
+ void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
+ void ath79_register_wmac_simple(void);
++void ath79_wmac_disable_2ghz(void);
++void ath79_wmac_disable_5ghz(void);
++
+ bool ar93xx_wmac_read_mac_address(u8 *dest);
+ 
+ #endif /* _ATH79_DEV_WMAC_H */

diff --git a/target/linux/ar71xx/patches-3.10/525-MIPS-ath79-enable-qca-usb-quirks.patch b/target/linux/ar71xx/patches-3.10/525-MIPS-ath79-enable-qca-usb-quirks.patch
new file mode 100644 (file)
index 0000000..ede8035
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/525-MIPS-ath79-enable-qca-usb-quirks.patch
@@ -0,0 +1,86 @@
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -182,14 +182,34 @@ static void __init ar933x_usb_setup(void
+                          &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+ }
+ 
+-static void __init ar934x_usb_setup(void)
++static void enable_tx_tx_idp_violation_fix(unsigned base)
+ {
+-      u32 bootstrap;
++      void __iomem *phy_reg;
++      u32 t;
++
++      phy_reg = ioremap(base, 4);
++      if (!phy_reg)
++              return;
++
++      t = ioread32(phy_reg);
++      t &= ~0xff;
++      t |= 0x58;
++      iowrite32(t, phy_reg);
++
++      iounmap(phy_reg);
++}
+ 
+-      bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+-      if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
++static void ar934x_usb_reset_notifier(struct platform_device *pdev)
++{
++      if (pdev->id != -1)
+               return;
+ 
++      enable_tx_tx_idp_violation_fix(0x18116c94);
++      dev_info(&pdev->dev, "TX-TX IDP fix enabled\n");
++}
++
++static void __init ar934x_usb_setup(void)
++{
+       ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
+       udelay(1000);
+ 
+@@ -202,14 +222,44 @@ static void __init ar934x_usb_setup(void
+       ath79_device_reset_clear(AR934X_RESET_USB_HOST);
+       udelay(1000);
+ 
++      ath79_ehci_pdata_v2.qca_force_host_mode = 1;
++      ath79_ehci_pdata_v2.qca_force_16bit_ptw = 1;
++      if (ath79_soc_rev >= 3)
++              ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier;
++
+       ath79_usb_register("ehci-platform", -1,
+                          AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
+                          ATH79_CPU_IRQ(3),
+                          &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+ }
+ 
++static void qca955x_usb_reset_notifier(struct platform_device *pdev)
++{
++      u32 base;
++
++      switch (pdev->id) {
++      case 0:
++              base = 0x18116c94;
++              break;
++
++      case 1:
++              base = 0x18116e54;
++              break;
++
++      default:
++              return;
++      }
++
++      enable_tx_tx_idp_violation_fix(base);
++      dev_info(&pdev->dev, "TX-TX IDP fix enabled\n");
++}
++
+ static void __init qca955x_usb_setup(void)
+ {
++      ath79_ehci_pdata_v2.qca_force_host_mode = 1;
++      ath79_ehci_pdata_v2.qca_force_16bit_ptw = 1;
++      ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier;
++
+       ath79_usb_register("ehci-platform", 0,
+                          QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
+                          ATH79_IP3_IRQ(0),

diff --git a/target/linux/ar71xx/patches-3.10/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-3.10/601-MIPS-ath79-add-more-register-defines.patch
new file mode 100644 (file)
index 0000000..014c769
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/601-MIPS-ath79-add-more-register-defines.patch
@@ -0,0 +1,354 @@
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -21,6 +21,10 @@
+ #include <linux/bitops.h>
+ 
+ #define AR71XX_APB_BASE               0x18000000
++#define AR71XX_GE0_BASE               0x19000000
++#define AR71XX_GE0_SIZE               0x10000
++#define AR71XX_GE1_BASE               0x1a000000
++#define AR71XX_GE1_SIZE               0x10000
+ #define AR71XX_EHCI_BASE      0x1b000000
+ #define AR71XX_EHCI_SIZE      0x1000
+ #define AR71XX_OHCI_BASE      0x1c000000
+@@ -40,6 +44,8 @@
+ #define AR71XX_PLL_SIZE               0x100
+ #define AR71XX_RESET_BASE     (AR71XX_APB_BASE + 0x00060000)
+ #define AR71XX_RESET_SIZE     0x100
++#define AR71XX_MII_BASE               (AR71XX_APB_BASE + 0x00070000)
++#define AR71XX_MII_SIZE               0x100
+ 
+ #define AR71XX_PCI_MEM_BASE   0x10000000
+ #define AR71XX_PCI_MEM_SIZE   0x07000000
+@@ -82,15 +88,21 @@
+ 
+ #define AR933X_UART_BASE      (AR71XX_APB_BASE + 0x00020000)
+ #define AR933X_UART_SIZE      0x14
++#define AR933X_GMAC_BASE      (AR71XX_APB_BASE + 0x00070000)
++#define AR933X_GMAC_SIZE      0x04
+ #define AR933X_WMAC_BASE      (AR71XX_APB_BASE + 0x00100000)
+ #define AR933X_WMAC_SIZE      0x20000
+ #define AR933X_EHCI_BASE      0x1b000000
+ #define AR933X_EHCI_SIZE      0x1000
+ 
++#define AR934X_GMAC_BASE      (AR71XX_APB_BASE + 0x00070000)
++#define AR934X_GMAC_SIZE      0x14
+ #define AR934X_WMAC_BASE      (AR71XX_APB_BASE + 0x00100000)
+ #define AR934X_WMAC_SIZE      0x20000
+ #define AR934X_EHCI_BASE      0x1b000000
+ #define AR934X_EHCI_SIZE      0x200
++#define AR934X_NFC_BASE               0x1b000200
++#define AR934X_NFC_SIZE               0xb8
+ #define AR934X_SRIF_BASE      (AR71XX_APB_BASE + 0x00116000)
+ #define AR934X_SRIF_SIZE      0x1000
+ 
+@@ -107,11 +119,15 @@
+ #define QCA955X_PCI_CTRL_BASE1        (AR71XX_APB_BASE + 0x00280000)
+ #define QCA955X_PCI_CTRL_SIZE 0x100
+ 
++#define QCA955X_GMAC_BASE     (AR71XX_APB_BASE + 0x00070000)
++#define QCA955X_GMAC_SIZE     0x40
+ #define QCA955X_WMAC_BASE     (AR71XX_APB_BASE + 0x00100000)
+ #define QCA955X_WMAC_SIZE     0x20000
+ #define QCA955X_EHCI0_BASE    0x1b000000
+ #define QCA955X_EHCI1_BASE    0x1b400000
+ #define QCA955X_EHCI_SIZE     0x1000
++#define QCA955X_NFC_BASE      0x1b800200
++#define QCA955X_NFC_SIZE      0xb8
+ 
+ #define AR9300_OTP_BASE               0x14000
+ #define AR9300_OTP_STATUS     0x15f18
+@@ -175,6 +191,9 @@
+ #define AR71XX_AHB_DIV_SHIFT          20
+ #define AR71XX_AHB_DIV_MASK           0x7
+ 
++#define AR71XX_ETH0_PLL_SHIFT         17
++#define AR71XX_ETH1_PLL_SHIFT         19
++
+ #define AR724X_PLL_REG_CPU_CONFIG     0x00
+ #define AR724X_PLL_REG_PCIE_CONFIG    0x18
+ 
+@@ -187,6 +206,8 @@
+ #define AR724X_DDR_DIV_SHIFT          22
+ #define AR724X_DDR_DIV_MASK           0x3
+ 
++#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c
++
+ #define AR913X_PLL_REG_CPU_CONFIG     0x00
+ #define AR913X_PLL_REG_ETH_CONFIG     0x04
+ #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
+@@ -199,6 +220,9 @@
+ #define AR913X_AHB_DIV_SHIFT          19
+ #define AR913X_AHB_DIV_MASK           0x1
+ 
++#define AR913X_ETH0_PLL_SHIFT         20
++#define AR913X_ETH1_PLL_SHIFT         22
++
+ #define AR933X_PLL_CPU_CONFIG_REG     0x00
+ #define AR933X_PLL_CLOCK_CTRL_REG     0x08
+ 
+@@ -220,6 +244,8 @@
+ #define AR934X_PLL_CPU_CONFIG_REG             0x00
+ #define AR934X_PLL_DDR_CONFIG_REG             0x04
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG               0x08
++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG   0x24
++#define AR934X_PLL_ETH_XMII_CONTROL_REG               0x2c
+ 
+ #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT     0
+ #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK      0x3f
+@@ -252,9 +278,13 @@
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL        BIT(21)
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL        BIT(24)
+ 
++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL  BIT(6)
++
+ #define QCA955X_PLL_CPU_CONFIG_REG            0x00
+ #define QCA955X_PLL_DDR_CONFIG_REG            0x04
+ #define QCA955X_PLL_CLK_CTRL_REG              0x08
++#define QCA955X_PLL_ETH_XMII_CONTROL_REG      0x28
++#define QCA955X_PLL_ETH_SGMII_CONTROL_REG     0x48
+ 
+ #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT    0
+ #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK     0x3f
+@@ -379,16 +409,83 @@
+ #define AR913X_RESET_USB_HOST         BIT(5)
+ #define AR913X_RESET_USB_PHY          BIT(4)
+ 
++#define AR933X_RESET_GE1_MDIO         BIT(23)
++#define AR933X_RESET_GE0_MDIO         BIT(22)
++#define AR933X_RESET_GE1_MAC          BIT(13)
+ #define AR933X_RESET_WMAC             BIT(11)
++#define AR933X_RESET_GE0_MAC          BIT(9)
+ #define AR933X_RESET_USB_HOST         BIT(5)
+ #define AR933X_RESET_USB_PHY          BIT(4)
+ #define AR933X_RESET_USBSUS_OVERRIDE  BIT(3)
+ 
++#define AR934X_RESET_HOST             BIT(31)
++#define AR934X_RESET_SLIC             BIT(30)
++#define AR934X_RESET_HDMA             BIT(29)
++#define AR934X_RESET_EXTERNAL         BIT(28)
++#define AR934X_RESET_RTC              BIT(27)
++#define AR934X_RESET_PCIE_EP_INT      BIT(26)
++#define AR934X_RESET_CHKSUM_ACC               BIT(25)
++#define AR934X_RESET_FULL_CHIP                BIT(24)
++#define AR934X_RESET_GE1_MDIO         BIT(23)
++#define AR934X_RESET_GE0_MDIO         BIT(22)
++#define AR934X_RESET_CPU_NMI          BIT(21)
++#define AR934X_RESET_CPU_COLD         BIT(20)
++#define AR934X_RESET_HOST_RESET_INT   BIT(19)
++#define AR934X_RESET_PCIE_EP          BIT(18)
++#define AR934X_RESET_UART1            BIT(17)
++#define AR934X_RESET_DDR              BIT(16)
++#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
++#define AR934X_RESET_NANDF            BIT(14)
++#define AR934X_RESET_GE1_MAC          BIT(13)
++#define AR934X_RESET_ETH_SWITCH_ANALOG        BIT(12)
+ #define AR934X_RESET_USB_PHY_ANALOG   BIT(11)
++#define AR934X_RESET_HOST_DMA_INT     BIT(10)
++#define AR934X_RESET_GE0_MAC          BIT(9)
++#define AR934X_RESET_ETH_SWITCH               BIT(8)
++#define AR934X_RESET_PCIE_PHY         BIT(7)
++#define AR934X_RESET_PCIE             BIT(6)
+ #define AR934X_RESET_USB_HOST         BIT(5)
+ #define AR934X_RESET_USB_PHY          BIT(4)
+ #define AR934X_RESET_USBSUS_OVERRIDE  BIT(3)
++#define AR934X_RESET_LUT              BIT(2)
++#define AR934X_RESET_MBOX             BIT(1)
++#define AR934X_RESET_I2S              BIT(0)
++
++#define QCA955X_RESET_HOST            BIT(31)
++#define QCA955X_RESET_SLIC            BIT(30)
++#define QCA955X_RESET_HDMA            BIT(29)
++#define QCA955X_RESET_EXTERNAL                BIT(28)
++#define QCA955X_RESET_RTC             BIT(27)
++#define QCA955X_RESET_PCIE_EP_INT     BIT(26)
++#define QCA955X_RESET_CHKSUM_ACC      BIT(25)
++#define QCA955X_RESET_FULL_CHIP               BIT(24)
++#define QCA955X_RESET_GE1_MDIO                BIT(23)
++#define QCA955X_RESET_GE0_MDIO                BIT(22)
++#define QCA955X_RESET_CPU_NMI         BIT(21)
++#define QCA955X_RESET_CPU_COLD                BIT(20)
++#define QCA955X_RESET_HOST_RESET_INT  BIT(19)
++#define QCA955X_RESET_PCIE_EP         BIT(18)
++#define QCA955X_RESET_UART1           BIT(17)
++#define QCA955X_RESET_DDR             BIT(16)
++#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
++#define QCA955X_RESET_NANDF           BIT(14)
++#define QCA955X_RESET_GE1_MAC         BIT(13)
++#define QCA955X_RESET_SGMII_ANALOG    BIT(12)
++#define QCA955X_RESET_USB_PHY_ANALOG  BIT(11)
++#define QCA955X_RESET_HOST_DMA_INT    BIT(10)
++#define QCA955X_RESET_GE0_MAC         BIT(9)
++#define QCA955X_RESET_SGMII           BIT(8)
++#define QCA955X_RESET_PCIE_PHY                BIT(7)
++#define QCA955X_RESET_PCIE            BIT(6)
++#define QCA955X_RESET_USB_HOST                BIT(5)
++#define QCA955X_RESET_USB_PHY         BIT(4)
++#define QCA955X_RESET_USBSUS_OVERRIDE BIT(3)
++#define QCA955X_RESET_LUT             BIT(2)
++#define QCA955X_RESET_MBOX            BIT(1)
++#define QCA955X_RESET_I2S             BIT(0)
+ 
++#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
++#define AR933X_BOOTSTRAP_EEPBUSY      BIT(4)
+ #define AR933X_BOOTSTRAP_REF_CLK_40   BIT(0)
+ 
+ #define AR934X_BOOTSTRAP_SW_OPTION8   BIT(23)
+@@ -530,6 +627,12 @@
+ #define AR71XX_GPIO_REG_INT_ENABLE    0x24
+ #define AR71XX_GPIO_REG_FUNC          0x28
+ 
++#define AR934X_GPIO_REG_OUT_FUNC0     0x2c
++#define AR934X_GPIO_REG_OUT_FUNC1     0x30
++#define AR934X_GPIO_REG_OUT_FUNC2     0x34
++#define AR934X_GPIO_REG_OUT_FUNC3     0x38
++#define AR934X_GPIO_REG_OUT_FUNC4     0x3c
++#define AR934X_GPIO_REG_OUT_FUNC5     0x40
+ #define AR934X_GPIO_REG_FUNC          0x6c
+ 
+ #define AR71XX_GPIO_COUNT             16
+@@ -561,4 +664,144 @@
+ #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT        13
+ #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
+ 
++#define AR71XX_GPIO_FUNC_STEREO_EN            BIT(17)
++#define AR71XX_GPIO_FUNC_SLIC_EN              BIT(16)
++#define AR71XX_GPIO_FUNC_SPI_CS2_EN           BIT(13)
++#define AR71XX_GPIO_FUNC_SPI_CS1_EN           BIT(12)
++#define AR71XX_GPIO_FUNC_UART_EN              BIT(8)
++#define AR71XX_GPIO_FUNC_USB_OC_EN            BIT(4)
++#define AR71XX_GPIO_FUNC_USB_CLK_EN           BIT(0)
++
++#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN               BIT(19)
++#define AR724X_GPIO_FUNC_SPI_EN                       BIT(18)
++#define AR724X_GPIO_FUNC_SPI_CS_EN2           BIT(14)
++#define AR724X_GPIO_FUNC_SPI_CS_EN1           BIT(13)
++#define AR724X_GPIO_FUNC_CLK_OBS5_EN          BIT(12)
++#define AR724X_GPIO_FUNC_CLK_OBS4_EN          BIT(11)
++#define AR724X_GPIO_FUNC_CLK_OBS3_EN          BIT(10)
++#define AR724X_GPIO_FUNC_CLK_OBS2_EN          BIT(9)
++#define AR724X_GPIO_FUNC_CLK_OBS1_EN          BIT(8)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN   BIT(7)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN   BIT(6)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN   BIT(5)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN   BIT(4)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN   BIT(3)
++#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN      BIT(2)
++#define AR724X_GPIO_FUNC_UART_EN              BIT(1)
++#define AR724X_GPIO_FUNC_JTAG_DISABLE         BIT(0)
++
++#define AR913X_GPIO_FUNC_WMAC_LED_EN          BIT(22)
++#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN               BIT(21)
++#define AR913X_GPIO_FUNC_I2S_REFCLKEN         BIT(20)
++#define AR913X_GPIO_FUNC_I2S_MCKEN            BIT(19)
++#define AR913X_GPIO_FUNC_I2S1_EN              BIT(18)
++#define AR913X_GPIO_FUNC_I2S0_EN              BIT(17)
++#define AR913X_GPIO_FUNC_SLIC_EN              BIT(16)
++#define AR913X_GPIO_FUNC_UART_RTSCTS_EN               BIT(9)
++#define AR913X_GPIO_FUNC_UART_EN              BIT(8)
++#define AR913X_GPIO_FUNC_USB_CLK_EN           BIT(4)
++
++#define AR933X_GPIO_FUNC_SPDIF2TCK            BIT(31)
++#define AR933X_GPIO_FUNC_SPDIF_EN             BIT(30)
++#define AR933X_GPIO_FUNC_I2SO_22_18_EN                BIT(29)
++#define AR933X_GPIO_FUNC_I2S_MCK_EN           BIT(27)
++#define AR933X_GPIO_FUNC_I2SO_EN              BIT(26)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL  BIT(25)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL  BIT(24)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT   BIT(23)
++#define AR933X_GPIO_FUNC_SPI_EN                       BIT(18)
++#define AR933X_GPIO_FUNC_SPI_CS_EN2           BIT(14)
++#define AR933X_GPIO_FUNC_SPI_CS_EN1           BIT(13)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN   BIT(7)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN   BIT(6)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN   BIT(5)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN   BIT(4)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN   BIT(3)
++#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN      BIT(2)
++#define AR933X_GPIO_FUNC_UART_EN              BIT(1)
++#define AR933X_GPIO_FUNC_JTAG_DISABLE         BIT(0)
++
++#define AR934X_GPIO_FUNC_CLK_OBS7_EN          BIT(9)
++#define AR934X_GPIO_FUNC_CLK_OBS6_EN          BIT(8)
++#define AR934X_GPIO_FUNC_CLK_OBS5_EN          BIT(7)
++#define AR934X_GPIO_FUNC_CLK_OBS4_EN          BIT(6)
++#define AR934X_GPIO_FUNC_CLK_OBS3_EN          BIT(5)
++#define AR934X_GPIO_FUNC_CLK_OBS2_EN          BIT(4)
++#define AR934X_GPIO_FUNC_CLK_OBS1_EN          BIT(3)
++#define AR934X_GPIO_FUNC_CLK_OBS0_EN          BIT(2)
++#define AR934X_GPIO_FUNC_JTAG_DISABLE         BIT(1)
++
++#define AR934X_GPIO_OUT_GPIO          0
++#define AR934X_GPIO_OUT_LED_LINK0     41
++#define AR934X_GPIO_OUT_LED_LINK1     42
++#define AR934X_GPIO_OUT_LED_LINK2     43
++#define AR934X_GPIO_OUT_LED_LINK3     44
++#define AR934X_GPIO_OUT_LED_LINK4     45
++
++/*
++ * MII_CTRL block
++ */
++#define AR71XX_MII_REG_MII0_CTRL      0x00
++#define AR71XX_MII_REG_MII1_CTRL      0x04
++
++#define AR71XX_MII_CTRL_IF_MASK               3
++#define AR71XX_MII_CTRL_SPEED_SHIFT   4
++#define AR71XX_MII_CTRL_SPEED_MASK    3
++#define AR71XX_MII_CTRL_SPEED_10      0
++#define AR71XX_MII_CTRL_SPEED_100     1
++#define AR71XX_MII_CTRL_SPEED_1000    2
++
++#define AR71XX_MII0_CTRL_IF_GMII      0
++#define AR71XX_MII0_CTRL_IF_MII               1
++#define AR71XX_MII0_CTRL_IF_RGMII     2
++#define AR71XX_MII0_CTRL_IF_RMII      3
++
++#define AR71XX_MII1_CTRL_IF_RGMII     0
++#define AR71XX_MII1_CTRL_IF_RMII      1
++
++/*
++ * AR933X GMAC interface
++ */
++#define AR933X_GMAC_REG_ETH_CFG               0x00
++
++#define AR933X_ETH_CFG_RGMII_GE0      BIT(0)
++#define AR933X_ETH_CFG_MII_GE0                BIT(1)
++#define AR933X_ETH_CFG_GMII_GE0               BIT(2)
++#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3)
++#define AR933X_ETH_CFG_MII_GE0_SLAVE  BIT(4)
++#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5)
++#define AR933X_ETH_CFG_SW_PHY_SWAP    BIT(7)
++#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP       BIT(8)
++#define AR933X_ETH_CFG_RMII_GE0               BIT(9)
++#define AR933X_ETH_CFG_RMII_GE0_SPD_10        0
++#define AR933X_ETH_CFG_RMII_GE0_SPD_100       BIT(10)
++
++/*
++ * AR934X GMAC Interface
++ */
++#define AR934X_GMAC_REG_ETH_CFG               0x00
++
++#define AR934X_ETH_CFG_RGMII_GMAC0    BIT(0)
++#define AR934X_ETH_CFG_MII_GMAC0      BIT(1)
++#define AR934X_ETH_CFG_GMII_GMAC0     BIT(2)
++#define AR934X_ETH_CFG_MII_GMAC0_MASTER       BIT(3)
++#define AR934X_ETH_CFG_MII_GMAC0_SLAVE        BIT(4)
++#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN       BIT(5)
++#define AR934X_ETH_CFG_SW_ONLY_MODE   BIT(6)
++#define AR934X_ETH_CFG_SW_PHY_SWAP    BIT(7)
++#define AR934X_ETH_CFG_SW_APB_ACCESS  BIT(9)
++#define AR934X_ETH_CFG_RMII_GMAC0     BIT(10)
++#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11)
++#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
++#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST       BIT(13)
++
++/*
++ * QCA955X GMAC Interface
++ */
++
++#define QCA955X_GMAC_REG_ETH_CFG      0x00
++
++#define QCA955X_ETH_CFG_RGMII_EN      BIT(0)
++#define QCA955X_ETH_CFG_GE0_SGMII     BIT(6)
++
+ #endif /* __ASM_MACH_AR71XX_REGS_H */

diff --git a/target/linux/ar71xx/patches-3.10/602-MIPS-ath79-add-openwrt-stuff.patch b/target/linux/ar71xx/patches-3.10/602-MIPS-ath79-add-openwrt-stuff.patch
new file mode 100644 (file)
index 0000000..da284e2
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/602-MIPS-ath79-add-openwrt-stuff.patch
@@ -0,0 +1,76 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -106,6 +106,20 @@ config SOC_QCA955X
+       select PCI_AR724X if PCI
+       def_bool n
+ 
++config ATH79_DEV_M25P80
++      select ATH79_DEV_SPI
++      def_bool n
++
++config ATH79_DEV_AP9X_PCI
++      select ATH79_PCI_ATH9K_FIXUP
++      def_bool n
++
++config ATH79_DEV_DSA
++      def_bool n
++
++config ATH79_DEV_ETH
++      def_bool n
++
+ config PCI_AR724X
+       def_bool n
+ 
+@@ -115,6 +129,10 @@ config ATH79_DEV_GPIO_BUTTONS
+ config ATH79_DEV_LEDS_GPIO
+       def_bool n
+ 
++config ATH79_DEV_NFC
++      depends on (SOC_AR934X || SOC_QCA955X)
++      def_bool n
++
+ config ATH79_DEV_SPI
+       def_bool n
+ 
+@@ -125,4 +143,13 @@ config ATH79_DEV_WMAC
+       depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
+       def_bool n
+ 
++config ATH79_NVRAM
++      def_bool n
++
++config ATH79_PCI_ATH9K_FIXUP
++      def_bool n
++
++config ATH79_ROUTERBOOT
++      def_bool n
++
+ endif
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -17,13 +17,25 @@ obj-$(CONFIG_PCI)                  += pci.o
+ # Devices
+ #
+ obj-y                                 += dev-common.o
++obj-$(CONFIG_ATH79_DEV_AP9X_PCI)      += dev-ap9x-pci.o
++obj-$(CONFIG_ATH79_DEV_DSA)           += dev-dsa.o
++obj-$(CONFIG_ATH79_DEV_ETH)           += dev-eth.o
+ obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS)  += dev-gpio-buttons.o
+ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO)     += dev-leds-gpio.o
++obj-$(CONFIG_ATH79_DEV_M25P80)                += dev-m25p80.o
++obj-$(CONFIG_ATH79_DEV_NFC)           += dev-nfc.o
+ obj-$(CONFIG_ATH79_DEV_SPI)           += dev-spi.o
+ obj-$(CONFIG_ATH79_DEV_USB)           += dev-usb.o
+ obj-$(CONFIG_ATH79_DEV_WMAC)          += dev-wmac.o
+ 
+ #
++# Miscellaneous objects
++#
++obj-$(CONFIG_ATH79_NVRAM)             += nvram.o
++obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP)   += pci-ath9k-fixup.o
++obj-$(CONFIG_ATH79_ROUTERBOOT)                += routerboot.o
++
++#
+ # Machines
+ #
+ obj-$(CONFIG_ATH79_MACH_AP121)                += mach-ap121.o

diff --git a/target/linux/ar71xx/patches-3.10/603-MIPS-ath79-ap121-fixes.patch b/target/linux/ar71xx/patches-3.10/603-MIPS-ath79-ap121-fixes.patch
new file mode 100644 (file)
index 0000000..b385b9e
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/603-MIPS-ath79-ap121-fixes.patch
@@ -0,0 +1,163 @@
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -1,19 +1,21 @@
+ /*
+  *  Atheros AP121 board support
+  *
+- *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+  *  by the Free Software Foundation.
+  */
+ 
+-#include "machtypes.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
++#include "machtypes.h"
+ 
+ #define AP121_GPIO_LED_WLAN           0
+ #define AP121_GPIO_LED_USB            1
+@@ -24,7 +26,14 @@
+ #define AP121_KEYS_POLL_INTERVAL      20      /* msecs */
+ #define AP121_KEYS_DEBOUNCE_INTERVAL  (3 * AP121_KEYS_POLL_INTERVAL)
+ 
+-#define AP121_CAL_DATA_ADDR   0x1fff1000
++#define AP121_MAC0_OFFSET             0x0000
++#define AP121_MAC1_OFFSET             0x0006
++#define AP121_CALDATA_OFFSET          0x1000
++#define AP121_WMAC_MAC_OFFSET         0x1002
++
++#define AP121_MINI_GPIO_LED_WLAN      0
++#define AP121_MINI_GPIO_BTN_JUMPSTART 12
++#define AP121_MINI_GPIO_BTN_RESET     11
+ 
+ static struct gpio_led ap121_leds_gpio[] __initdata = {
+       {
+@@ -58,41 +67,78 @@ static struct gpio_keys_button ap121_gpi
+       }
+ };
+ 
+-static struct ath79_spi_controller_data ap121_spi0_data = {
+-      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-      .cs_line = 0,
++static struct gpio_led ap121_mini_leds_gpio[] __initdata = {
++      {
++              .name           = "ap121:green:wlan",
++              .gpio           = AP121_MINI_GPIO_LED_WLAN,
++              .active_low     = 0,
++      },
+ };
+ 
+-static struct spi_board_info ap121_spi_info[] = {
++static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = {
+       {
+-              .bus_num        = 0,
+-              .chip_select    = 0,
+-              .max_speed_hz   = 25000000,
+-              .modalias       = "mx25l1606e",
+-              .controller_data = &ap121_spi0_data,
++              .desc           = "jumpstart button",
++              .type           = EV_KEY,
++              .code           = KEY_WPS_BUTTON,
++              .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++              .gpio           = AP121_MINI_GPIO_BTN_JUMPSTART,
++              .active_low     = 1,
++      },
++      {
++              .desc           = "reset button",
++              .type           = EV_KEY,
++              .code           = KEY_RESTART,
++              .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++              .gpio           = AP121_MINI_GPIO_BTN_RESET,
++              .active_low     = 1,
+       }
+ };
+ 
+-static struct ath79_spi_platform_data ap121_spi_data = {
+-      .bus_num        = 0,
+-      .num_chipselect = 1,
+-};
++static void __init ap121_common_setup(void)
++{
++      u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++      ath79_register_m25p80(NULL);
++      ath79_register_wmac(art + AP121_CALDATA_OFFSET,
++                          art + AP121_WMAC_MAC_OFFSET);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0);
++      ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0);
++
++      ath79_register_mdio(0, 0x0);
++
++      /* LAN ports */
++      ath79_register_eth(1);
++
++      /* WAN port */
++      ath79_register_eth(0);
++}
+ 
+ static void __init ap121_setup(void)
+ {
+-      u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
++      ap121_common_setup();
+ 
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
+                                ap121_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(ap121_gpio_keys),
+                                       ap121_gpio_keys);
+-
+-      ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+-                         ARRAY_SIZE(ap121_spi_info));
+       ath79_register_usb();
+-      ath79_register_wmac(cal_data, NULL);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
+            ap121_setup);
++
++static void __init ap121_mini_setup(void)
++{
++      ap121_common_setup();
++
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio),
++                               ap121_mini_leds_gpio);
++      ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
++                                      ARRAY_SIZE(ap121_mini_gpio_keys),
++                                      ap121_mini_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI",
++           ap121_mini_setup);
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi
+ config ATH79_MACH_AP121
+       bool "Atheros AP121 reference board"
+       select SOC_AR933X
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+-      select ATH79_DEV_SPI
++      select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       help
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -17,6 +17,7 @@
+ enum ath79_mach_type {
+       ATH79_MACH_GENERIC = 0,
+       ATH79_MACH_AP121,               /* Atheros AP121 reference board */
++      ATH79_MACH_AP121_MINI,          /* Atheros AP121-MINI reference board */
+       ATH79_MACH_AP136_010,           /* Atheros AP136-010 reference board */
+       ATH79_MACH_AP81,                /* Atheros AP81 reference board */
+       ATH79_MACH_DB120,               /* Atheros DB120 reference board */

diff --git a/target/linux/ar71xx/patches-3.10/604-MIPS-ath79-ap81-fixes.patch b/target/linux/ar71xx/patches-3.10/604-MIPS-ath79-ap81-fixes.patch
new file mode 100644 (file)
index 0000000..bbfdd49
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/604-MIPS-ath79-ap81-fixes.patch
@@ -0,0 +1,128 @@
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -9,12 +9,16 @@
+  *  by the Free Software Foundation.
+  */
+ 
+-#include "machtypes.h"
+-#include "dev-wmac.h"
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
+ #include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
+ 
+ #define AP81_GPIO_LED_STATUS  1
+ #define AP81_GPIO_LED_AOSS    3
+@@ -29,6 +33,37 @@
+ 
+ #define AP81_CAL_DATA_ADDR    0x1fff1000
+ 
++static struct mtd_partition ap81_partitions[] = {
++      {
++              .name           = "u-boot",
++              .offset         = 0,
++              .size           = 0x040000,
++              .mask_flags     = MTD_WRITEABLE,
++      }, {
++              .name           = "u-boot-env",
++              .offset         = 0x040000,
++              .size           = 0x010000,
++      }, {
++              .name           = "rootfs",
++              .offset         = 0x050000,
++              .size           = 0x500000,
++      }, {
++              .name           = "uImage",
++              .offset         = 0x550000,
++              .size           = 0x100000,
++      }, {
++              .name           = "ART",
++              .offset         = 0x650000,
++              .size           = 0x1b0000,
++              .mask_flags     = MTD_WRITEABLE,
++      }
++};
++
++static struct flash_platform_data ap81_flash_data = {
++      .parts          = ap81_partitions,
++      .nr_parts       = ARRAY_SIZE(ap81_partitions),
++};
++
+ static struct gpio_led ap81_leds_gpio[] __initdata = {
+       {
+               .name           = "ap81:green:status",
+@@ -67,26 +102,6 @@ static struct gpio_keys_button ap81_gpio
+       }
+ };
+ 
+-static struct ath79_spi_controller_data ap81_spi0_data = {
+-      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-      .cs_line = 0,
+-};
+-
+-static struct spi_board_info ap81_spi_info[] = {
+-      {
+-              .bus_num        = 0,
+-              .chip_select    = 0,
+-              .max_speed_hz   = 25000000,
+-              .modalias       = "m25p64",
+-              .controller_data = &ap81_spi0_data,
+-      }
+-};
+-
+-static struct ath79_spi_platform_data ap81_spi_data = {
+-      .bus_num        = 0,
+-      .num_chipselect = 1,
+-};
+-
+ static void __init ap81_setup(void)
+ {
+       u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
+@@ -96,10 +111,24 @@ static void __init ap81_setup(void)
+       ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(ap81_gpio_keys),
+                                       ap81_gpio_keys);
+-      ath79_register_spi(&ap81_spi_data, ap81_spi_info,
+-                         ARRAY_SIZE(ap81_spi_info));
++      ath79_register_m25p80(&ap81_flash_data);
+       ath79_register_wmac(cal_data, NULL);
+       ath79_register_usb();
++
++      ath79_register_mdio(0, 0x0);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0);
++      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++      ath79_eth0_data.speed = SPEED_100;
++      ath79_eth0_data.duplex = DUPLEX_FULL;
++      ath79_eth0_data.has_ar8216 = 1;
++
++      ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1);
++      ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++      ath79_eth1_data.phy_mask = 0x10;
++
++      ath79_register_eth(0);
++      ath79_register_eth(1);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -30,9 +30,10 @@ config ATH79_MACH_AP136
+ config ATH79_MACH_AP81
+       bool "Atheros AP81 reference board"
+       select SOC_AR913X
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+-      select ATH79_DEV_SPI
++      select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       help

diff --git a/target/linux/ar71xx/patches-3.10/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-3.10/605-MIPS-ath79-db120-fixes.patch
new file mode 100644 (file)
index 0000000..44f2b03
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/605-MIPS-ath79-db120-fixes.patch
@@ -0,0 +1,209 @@
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -2,7 +2,7 @@
+  * Atheros DB120 reference board support
+  *
+  * Copyright (c) 2011 Qualcomm Atheros
+- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+  *
+  * Permission to use, copy, modify, and/or distribute this software for any
+  * purpose with or without fee is hereby granted, provided that the above
+@@ -19,16 +19,26 @@
+  */
+ 
+ #include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
+ 
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-nfc.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
+-#include "pci.h"
++#include "machtypes.h"
+ 
++#define DB120_GPIO_LED_USB            11
+ #define DB120_GPIO_LED_WLAN_5G                12
+ #define DB120_GPIO_LED_WLAN_2G                13
+ #define DB120_GPIO_LED_STATUS         14
+@@ -39,8 +49,10 @@
+ #define DB120_KEYS_POLL_INTERVAL      20      /* msecs */
+ #define DB120_KEYS_DEBOUNCE_INTERVAL  (3 * DB120_KEYS_POLL_INTERVAL)
+ 
+-#define DB120_WMAC_CALDATA_OFFSET 0x1000
+-#define DB120_PCIE_CALDATA_OFFSET 0x5000
++#define DB120_MAC0_OFFSET             0
++#define DB120_MAC1_OFFSET             6
++#define DB120_WMAC_CALDATA_OFFSET     0x1000
++#define DB120_PCIE_CALDATA_OFFSET     0x5000
+ 
+ static struct gpio_led db120_leds_gpio[] __initdata = {
+       {
+@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[]
+               .gpio           = DB120_GPIO_LED_WLAN_2G,
+               .active_low     = 1,
+       },
++      {
++              .name           = "db120:green:usb",
++              .gpio           = DB120_GPIO_LED_USB,
++              .active_low     = 1,
++      }
+ };
+ 
+ static struct gpio_keys_button db120_gpio_keys[] __initdata = {
+@@ -76,66 +93,85 @@ static struct gpio_keys_button db120_gpi
+       },
+ };
+ 
+-static struct ath79_spi_controller_data db120_spi0_data = {
+-      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-      .cs_line = 0,
++static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
++      .mode = AR8327_PAD_MAC_RGMII,
++      .txclk_delay_en = true,
++      .rxclk_delay_en = true,
++      .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++      .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+ };
+ 
+-static struct spi_board_info db120_spi_info[] = {
+-      {
+-              .bus_num        = 0,
+-              .chip_select    = 0,
+-              .max_speed_hz   = 25000000,
+-              .modalias       = "s25sl064a",
+-              .controller_data = &db120_spi0_data,
+-      }
++static struct ar8327_led_cfg db120_ar8327_led_cfg = {
++      .led_ctrl0 = 0x00000000,
++      .led_ctrl1 = 0xc737c737,
++      .led_ctrl2 = 0x00000000,
++      .led_ctrl3 = 0x00c30c00,
++      .open_drain = true,
+ };
+ 
+-static struct ath79_spi_platform_data db120_spi_data = {
+-      .bus_num        = 0,
+-      .num_chipselect = 1,
++static struct ar8327_platform_data db120_ar8327_data = {
++      .pad0_cfg = &db120_ar8327_pad0_cfg,
++      .port0_cfg = {
++              .force_link = 1,
++              .speed = AR8327_PORT_SPEED_1000,
++              .duplex = 1,
++              .txpause = 1,
++              .rxpause = 1,
++      },
++      .led_cfg = &db120_ar8327_led_cfg,
+ };
+ 
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data db120_ath9k_data;
+-
+-static int db120_pci_plat_dev_init(struct pci_dev *dev)
+-{
+-      switch (PCI_SLOT(dev->devfn)) {
+-      case 0:
+-              dev->dev.platform_data = &db120_ath9k_data;
+-              break;
+-      }
+-
+-      return 0;
+-}
+-
+-static void __init db120_pci_init(u8 *eeprom)
+-{
+-      memcpy(db120_ath9k_data.eeprom_data, eeprom,
+-             sizeof(db120_ath9k_data.eeprom_data));
+-
+-      ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
+-      ath79_register_pci();
+-}
+-#else
+-static inline void db120_pci_init(void) {}
+-#endif /* CONFIG_PCI */
++static struct mdio_board_info db120_mdio0_info[] = {
++      {
++              .bus_id = "ag71xx-mdio.0",
++              .phy_addr = 0,
++              .platform_data = &db120_ar8327_data,
++      },
++};
+ 
+ static void __init db120_setup(void)
+ {
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ 
++      ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
++      ath79_register_m25p80(NULL);
++
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
+                                db120_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(db120_gpio_keys),
+                                       db120_gpio_keys);
+-      ath79_register_spi(&db120_spi_data, db120_spi_info,
+-                         ARRAY_SIZE(db120_spi_info));
+       ath79_register_usb();
+       ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
+-      db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
++      ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
++
++      ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
++                                 AR934X_ETH_CFG_SW_ONLY_MODE);
++
++      ath79_register_mdio(1, 0x0);
++      ath79_register_mdio(0, 0x0);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
++
++      mdiobus_register_board_info(db120_mdio0_info,
++                                  ARRAY_SIZE(db120_mdio0_info));
++
++      /* GMAC0 is connected to an AR8327 switch */
++      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++      ath79_eth0_data.phy_mask = BIT(0);
++      ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++      ath79_eth0_pll_data.pll_1000 = 0x06000000;
++      ath79_register_eth(0);
++
++      /* GMAC1 is connected to the internal switch */
++      ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
++      ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++      ath79_eth1_data.speed = SPEED_1000;
++      ath79_eth1_data.duplex = DUPLEX_FULL;
++
++      ath79_register_eth(1);
++
++      ath79_register_nfc();
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -43,9 +43,12 @@ config ATH79_MACH_AP81
+ config ATH79_MACH_DB120
+       bool "Atheros DB120 reference board"
+       select SOC_AR934X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+-      select ATH79_DEV_SPI
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_NFC
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       help

diff --git a/target/linux/ar71xx/patches-3.10/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-3.10/606-MIPS-ath79-pb44-fixes.patch
new file mode 100644 (file)
index 0000000..b38b461
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/606-MIPS-ath79-pb44-fixes.patch
@@ -0,0 +1,153 @@
+--- a/arch/mips/ath79/mach-pb44.c
++++ b/arch/mips/ath79/mach-pb44.c
+@@ -8,23 +8,48 @@
+  *  by the Free Software Foundation.
+  */
+ 
++#include <linux/delay.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c.h>
+ #include <linux/i2c-gpio.h>
+ #include <linux/i2c/pcf857x.h>
++#include <linux/i2c/pcf857x.h>
++#include <linux/spi/flash.h>
++#include <linux/spi/vsc7385.h>
+ 
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
++#include "machtypes.h"
+ #include "pci.h"
+ 
+ #define PB44_GPIO_I2C_SCL     0
+ #define PB44_GPIO_I2C_SDA     1
+ 
++#define PB44_PCF8757_VSC7395_CS       0
++#define PB44_PCF8757_STEREO_CS        1
++#define PB44_PCF8757_SLIC_CS0 2
++#define PB44_PCF8757_SLIC_TEST        3
++#define PB44_PCF8757_SLIC_INT0        4
++#define PB44_PCF8757_SLIC_INT1        5
++#define PB44_PCF8757_SW_RESET 6
++#define PB44_PCF8757_SW_JUMP  8
++#define PB44_PCF8757_LED_JUMP1        9
++#define PB44_PCF8757_LED_JUMP2        10
++#define PB44_PCF8757_TP24     11
++#define PB44_PCF8757_TP25     12
++#define PB44_PCF8757_TP26     13
++#define PB44_PCF8757_TP27     14
++#define PB44_PCF8757_TP28     15
++
+ #define PB44_GPIO_EXP_BASE    16
++#define PB44_GPIO_VSC7395_CS  (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
+ #define PB44_GPIO_SW_RESET    (PB44_GPIO_EXP_BASE + 6)
+ #define PB44_GPIO_SW_JUMP     (PB44_GPIO_EXP_BASE + 8)
+ #define PB44_GPIO_LED_JUMP1   (PB44_GPIO_EXP_BASE + 9)
+@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data 
+       .cs_line = 0,
+ };
+ 
++static struct ath79_spi_controller_data pb44_spi1_data = {
++      .cs_type = ATH79_SPI_CS_TYPE_GPIO,
++      .cs_line = PB44_GPIO_VSC7395_CS,
++};
++
++static void pb44_vsc7395_reset(void)
++{
++      ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
++      udelay(10);
++      ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
++      mdelay(50);
++}
++
++static struct vsc7385_platform_data pb44_vsc7395_data = {
++      .reset          = pb44_vsc7395_reset,
++      .ucode_name     = "vsc7395_ucode_pb44.bin",
++      .mac_cfg = {
++              .tx_ipg         = 6,
++              .bit2           = 1,
++              .clk_sel        = 0,
++      },
++};
++
++static const char *pb44_part_probes[] = {
++      "RedBoot",
++      NULL,
++};
++
++static struct flash_platform_data pb44_flash_data = {
++      .part_probes    = pb44_part_probes,
++};
++
+ static struct spi_board_info pb44_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "m25p64",
++              .platform_data  = &pb44_flash_data,
+               .controller_data = &pb44_spi0_data,
+       },
++      {
++              .bus_num        = 0,
++              .chip_select    = 1,
++              .max_speed_hz   = 25000000,
++              .modalias       = "spi-vsc7385",
++              .platform_data  = &pb44_vsc7395_data,
++              .controller_data = &pb44_spi1_data,
++      }
+ };
+ 
+ static struct ath79_spi_platform_data pb44_spi_data = {
+       .bus_num                = 0,
+-      .num_chipselect         = 1,
++      .num_chipselect         = 2,
+ };
+ 
++#define PB44_WAN_PHYMASK      BIT(0)
++#define PB44_LAN_PHYMASK      0
++#define PB44_MDIO_PHYMASK     (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
++
+ static void __init pb44_init(void)
+ {
+       i2c_register_board_info(0, pb44_i2c_board_info,
+@@ -122,6 +192,22 @@ static void __init pb44_init(void)
+                          ARRAY_SIZE(pb44_spi_info));
+       ath79_register_usb();
+       ath79_register_pci();
++
++      ath79_register_mdio(0, ~PB44_MDIO_PHYMASK);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++      ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK;
++
++      ath79_register_eth(0);
++
++      ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++      ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++      ath79_eth1_data.speed = SPEED_1000;
++      ath79_eth1_data.duplex = DUPLEX_FULL;
++      ath79_eth1_pll_data.pll_1000 = 0x110000;
++
++      ath79_register_eth(1);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -58,6 +58,7 @@ config ATH79_MACH_DB120
+ config ATH79_MACH_PB44
+       bool "Atheros PB44 reference board"
+       select SOC_AR71XX
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_SPI

diff --git a/target/linux/ar71xx/patches-3.10/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-3.10/607-MIPS-ath79-ubnt-xm-fixes.patch
new file mode 100644 (file)
index 0000000..cbbe20b
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/607-MIPS-ath79-ubnt-xm-fixes.patch
@@ -0,0 +1,109 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -70,9 +70,10 @@ config ATH79_MACH_PB44
+ config ATH79_MACH_UBNT_XM
+       bool "Ubiquiti Networks XM (rev 1.0) board"
+       select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+-      select ATH79_DEV_SPI
++      select ATH79_DEV_M25P80
+       help
+         Say 'Y' here if you want your kernel to support the
+         Ubiquiti Networks XM (rev 1.0) board.
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -16,10 +16,11 @@
+ 
+ #include <asm/mach-ath79/irq.h>
+ 
+-#include "machtypes.h"
++#include "dev-ap9x-pci.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
+ #include "pci.h"
+ 
+ #define UBNT_XM_GPIO_LED_L1           0
+@@ -32,7 +33,7 @@
+ #define UBNT_XM_KEYS_POLL_INTERVAL    20
+ #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL        (3 * UBNT_XM_KEYS_POLL_INTERVAL)
+ 
+-#define UBNT_XM_EEPROM_ADDR           (u8 *) KSEG1ADDR(0x1fff1000)
++#define UBNT_XM_EEPROM_ADDR           0x1fff1000
+ 
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+       {
+@@ -65,54 +66,10 @@ static struct gpio_keys_button ubnt_xm_g
+       }
+ };
+ 
+-static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
+-      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-      .cs_line = 0,
+-};
+-
+-static struct spi_board_info ubnt_xm_spi_info[] = {
+-      {
+-              .bus_num        = 0,
+-              .chip_select    = 0,
+-              .max_speed_hz   = 25000000,
+-              .modalias       = "mx25l6405d",
+-              .controller_data = &ubnt_xm_spi0_data,
+-      }
+-};
+-
+-static struct ath79_spi_platform_data ubnt_xm_spi_data = {
+-      .bus_num                = 0,
+-      .num_chipselect         = 1,
+-};
+-
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ubnt_xm_eeprom_data;
+-
+-static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
+-{
+-      switch (PCI_SLOT(dev->devfn)) {
+-      case 0:
+-              dev->dev.platform_data = &ubnt_xm_eeprom_data;
+-              break;
+-      }
+-
+-      return 0;
+-}
+-
+-static void __init ubnt_xm_pci_init(void)
+-{
+-      memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+-             sizeof(ubnt_xm_eeprom_data.eeprom_data));
+-
+-      ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
+-      ath79_register_pci();
+-}
+-#else
+-static inline void ubnt_xm_pci_init(void) {}
+-#endif /* CONFIG_PCI */
+-
+ static void __init ubnt_xm_init(void)
+ {
++      u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
++
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+                                ubnt_xm_leds_gpio);
+ 
+@@ -120,10 +77,8 @@ static void __init ubnt_xm_init(void)
+                                       ARRAY_SIZE(ubnt_xm_gpio_keys),
+                                       ubnt_xm_gpio_keys);
+ 
+-      ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
+-                         ARRAY_SIZE(ubnt_xm_spi_info));
+-
+-      ubnt_xm_pci_init();
++      ath79_register_m25p80(NULL);
++      ap91_pci_init(eeprom, NULL);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,

diff --git a/target/linux/ar71xx/patches-3.10/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-3.10/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
new file mode 100644 (file)
index 0000000..2e8fbdc
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
@@ -0,0 +1,343 @@
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -12,16 +12,22 @@
+ 
+ #include <linux/init.h>
+ #include <linux/pci.h>
++#include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/etherdevice.h>
++#include <linux/ar8216_platform.h>
+ 
+ #include <asm/mach-ath79/irq.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
+ 
+ #include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
+ #include "machtypes.h"
+-#include "pci.h"
+ 
+ #define UBNT_XM_GPIO_LED_L1           0
+ #define UBNT_XM_GPIO_LED_L2           1
+@@ -37,19 +43,19 @@
+ 
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+       {
+-              .name           = "ubnt-xm:red:link1",
++              .name           = "ubnt:red:link1",
+               .gpio           = UBNT_XM_GPIO_LED_L1,
+               .active_low     = 0,
+       }, {
+-              .name           = "ubnt-xm:orange:link2",
++              .name           = "ubnt:orange:link2",
+               .gpio           = UBNT_XM_GPIO_LED_L2,
+               .active_low     = 0,
+       }, {
+-              .name           = "ubnt-xm:green:link3",
++              .name           = "ubnt:green:link3",
+               .gpio           = UBNT_XM_GPIO_LED_L3,
+               .active_low     = 0,
+       }, {
+-              .name           = "ubnt-xm:green:link4",
++              .name           = "ubnt:green:link4",
+               .gpio           = UBNT_XM_GPIO_LED_L4,
+               .active_low     = 0,
+       },
+@@ -66,9 +72,13 @@ static struct gpio_keys_button ubnt_xm_g
+       }
+ };
+ 
++#define UBNT_M_WAN_PHYMASK    BIT(4)
++
+ static void __init ubnt_xm_init(void)
+ {
+       u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
++      u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++      u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
+ 
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+                                ubnt_xm_leds_gpio);
+@@ -79,9 +89,242 @@ static void __init ubnt_xm_init(void)
+ 
+       ath79_register_m25p80(NULL);
+       ap91_pci_init(eeprom, NULL);
++
++      ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++      ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++      ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++      ath79_register_eth(0);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+            "UBNT-XM",
+            "Ubiquiti Networks XM (rev 1.0) board",
+            ubnt_xm_init);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
++           ubnt_xm_init);
++
++static void __init ubnt_rocket_m_setup(void)
++{
++      ubnt_xm_init();
++      ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
++           ubnt_rocket_m_setup);
++
++static void __init ubnt_nano_m_setup(void)
++{
++      ubnt_xm_init();
++      ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
++           ubnt_nano_m_setup);
++
++static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
++      {
++              .name           = "ubnt:green:globe",
++              .gpio           = 0,
++              .active_low     = 1,
++      }, {
++              .name           = "ubnt:green:power",
++              .gpio           = 11,
++              .active_low     = 1,
++              .default_state  = LEDS_GPIO_DEFSTATE_ON,
++      }
++};
++
++static void __init ubnt_airrouter_setup(void)
++{
++      u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++      u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++      ath79_register_m25p80(NULL);
++      ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++      ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
++
++      ath79_register_eth(1);
++      ath79_register_eth(0);
++      ath79_register_usb();
++
++      ap91_pci_init(ee, NULL);
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
++                               ubnt_airrouter_leds_gpio);
++
++      ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
++           ubnt_airrouter_setup);
++
++static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
++      {
++              .name           = "ubnt:orange:dome",
++              .gpio           = 1,
++              .active_low     = 0,
++      }, {
++              .name           = "ubnt:green:dome",
++              .gpio           = 0,
++              .active_low     = 0,
++      }
++};
++
++static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = {
++      {
++              .name           = "ubnt:orange:front",
++              .gpio           = 1,
++              .active_low     = 0,
++      }, {
++              .name           = "ubnt:green:front",
++              .gpio           = 0,
++              .active_low     = 0,
++      }
++};
++
++static void __init ubnt_unifi_setup(void)
++{
++      u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
++      u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++      ath79_register_m25p80(NULL);
++
++      ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++      ath79_register_eth(0);
++
++      ap91_pci_init(ee, NULL);
++
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
++                               ubnt_unifi_leds_gpio);
++
++      ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
++           ubnt_unifi_setup);
++
++
++#define UBNT_UNIFIOD_PRI_PHYMASK      BIT(4)
++#define UBNT_UNIFIOD_2ND_PHYMASK      (BIT(0) | BIT(1) | BIT(2) | BIT(3))
++
++static void __init ubnt_unifi_outdoor_setup(void)
++{
++      u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++      u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++      u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++      ath79_register_m25p80(NULL);
++
++      ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
++                               UBNT_UNIFIOD_2ND_PHYMASK));
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++      ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++      ath79_register_eth(0);
++      ath79_register_eth(1);
++
++      ap91_pci_init(ee, NULL);
++
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio),
++                               ubnt_unifi_outdoor_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20",
++           "Ubiquiti UniFiAP Outdoor",
++           ubnt_unifi_outdoor_setup);
++
++static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
++      {
++              .name           = "ubnt:white:dome",
++              .gpio           = 12,
++      }, {
++              .name           = "ubnt:blue:dome",
++              .gpio           = 13,
++      }
++};
++
++static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = {
++      {
++              .desc                   = "reset",
++              .type                   = EV_KEY,
++              .code                   = KEY_RESTART,
++              .debounce_interval      = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
++              .gpio                   = 17,
++              .active_low             = 1,
++      }
++};
++
++static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = {
++      .mode = AR8327_PAD_MAC_RGMII,
++      .txclk_delay_en = true,
++      .rxclk_delay_en = true,
++      .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++      .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_platform_data uap_pro_ar8327_data = {
++      .pad0_cfg = &uap_pro_ar8327_pad0_cfg,
++      .port0_cfg = {
++              .force_link = 1,
++              .speed = AR8327_PORT_SPEED_1000,
++              .duplex = 1,
++              .txpause = 1,
++              .rxpause = 1,
++      },
++};
++
++static struct mdio_board_info uap_pro_mdio0_info[] = {
++      {
++              .bus_id = "ag71xx-mdio.0",
++              .phy_addr = 0,
++              .platform_data = &uap_pro_ar8327_data,
++      },
++};
++
++#define UAP_PRO_MAC0_OFFSET           0x0000
++#define UAP_PRO_MAC1_OFFSET           0x0006
++#define UAP_PRO_WMAC_CALDATA_OFFSET   0x1000
++#define UAP_PRO_PCI_CALDATA_OFFSET    0x5000
++
++static void __init ubnt_uap_pro_setup(void)
++{
++      u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++
++      ath79_register_m25p80(NULL);
++
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds),
++                               ubnt_uap_pro_gpio_leds);
++      ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(uap_pro_gpio_keys),
++                                        uap_pro_gpio_keys);
++
++      ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
++      ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
++
++      ath79_register_mdio(0, 0x0);
++      mdiobus_register_board_info(uap_pro_mdio0_info,
++                                  ARRAY_SIZE(uap_pro_mdio0_info));
++
++      ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++      ath79_init_mac(ath79_eth0_data.mac_addr,
++                     eeprom + UAP_PRO_MAC0_OFFSET, 0);
++
++      /* GMAC0 is connected to an AR8327 switch */
++      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++      ath79_eth0_data.phy_mask = BIT(0);
++      ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++      ath79_eth0_pll_data.pll_1000 = 0x06000000;
++      ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
++           ubnt_uap_pro_setup);
++
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -68,12 +68,16 @@ config ATH79_MACH_PB44
+         Atheros PB44 reference board.
+ 
+ config ATH79_MACH_UBNT_XM
+-      bool "Ubiquiti Networks XM (rev 1.0) board"
++      bool "Ubiquiti Networks XM/UniFi boards"
+       select SOC_AR724X
++      select SOC_AR934X
+       select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
+       help
+         Say 'Y' here if you want your kernel to support the
+         Ubiquiti Networks XM (rev 1.0) board.
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -22,6 +22,13 @@ enum ath79_mach_type {
+       ATH79_MACH_AP81,                /* Atheros AP81 reference board */
+       ATH79_MACH_DB120,               /* Atheros DB120 reference board */
+       ATH79_MACH_PB44,                /* Atheros PB44 reference board */
++      ATH79_MACH_UBNT_AIRROUTER,      /* Ubiquiti AirRouter */
++      ATH79_MACH_UBNT_BULLET_M,       /* Ubiquiti Bullet M */
++      ATH79_MACH_UBNT_NANO_M,         /* Ubiquiti NanoStation M */
++      ATH79_MACH_UBNT_ROCKET_M,       /* Ubiquiti Rocket M */
++      ATH79_MACH_UBNT_UAP_PRO,        /* Ubiquiti UniFi AP Pro */
++      ATH79_MACH_UBNT_UNIFI,          /* Ubiquiti Unifi */
++      ATH79_MACH_UBNT_UNIFI_OUTDOOR,  /* Ubiquiti UnifiAP Outdoor */
+       ATH79_MACH_UBNT_XM,             /* Ubiquiti Networks XM board rev 1.0 */
+ };
+ 

diff --git a/target/linux/ar71xx/patches-3.10/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.10/609-MIPS-ath79-ap136-fixes.patch
new file mode 100644 (file)
index 0000000..4b530a7
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/609-MIPS-ath79-ap136-fixes.patch
@@ -0,0 +1,329 @@
+--- a/arch/mips/ath79/mach-ap136.c
++++ b/arch/mips/ath79/mach-ap136.c
+@@ -18,23 +18,29 @@
+  *
+  */
+ 
+-#include <linux/pci.h>
+-#include <linux/ath9k_platform.h>
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
+ 
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "pci.h"
++#include "dev-ap9x-pci.h"
+ #include "dev-gpio-buttons.h"
++#include "dev-eth.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
++#include "dev-nfc.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
+-#include "pci.h"
++#include "machtypes.h"
+ 
+-#define AP136_GPIO_LED_STATUS_RED     14
+-#define AP136_GPIO_LED_STATUS_GREEN   19
+ #define AP136_GPIO_LED_USB            4
+-#define AP136_GPIO_LED_WLAN_2G                13
+ #define AP136_GPIO_LED_WLAN_5G                12
++#define AP136_GPIO_LED_WLAN_2G                13
++#define AP136_GPIO_LED_STATUS_RED     14
+ #define AP136_GPIO_LED_WPS_RED                15
++#define AP136_GPIO_LED_STATUS_GREEN   19
+ #define AP136_GPIO_LED_WPS_GREEN      20
+ 
+ #define AP136_GPIO_BTN_WPS            16
+@@ -43,37 +49,39 @@
+ #define AP136_KEYS_POLL_INTERVAL      20      /* msecs */
+ #define AP136_KEYS_DEBOUNCE_INTERVAL  (3 * AP136_KEYS_POLL_INTERVAL)
+ 
+-#define AP136_WMAC_CALDATA_OFFSET 0x1000
+-#define AP136_PCIE_CALDATA_OFFSET 0x5000
++#define AP136_MAC0_OFFSET             0
++#define AP136_MAC1_OFFSET             6
++#define AP136_WMAC_CALDATA_OFFSET     0x1000
++#define AP136_PCIE_CALDATA_OFFSET     0x5000
+ 
+ static struct gpio_led ap136_leds_gpio[] __initdata = {
+       {
+-              .name           = "qca:green:status",
++              .name           = "ap136:green:status",
+               .gpio           = AP136_GPIO_LED_STATUS_GREEN,
+               .active_low     = 1,
+       },
+       {
+-              .name           = "qca:red:status",
++              .name           = "ap136:red:status",
+               .gpio           = AP136_GPIO_LED_STATUS_RED,
+               .active_low     = 1,
+       },
+       {
+-              .name           = "qca:green:wps",
++              .name           = "ap136:green:wps",
+               .gpio           = AP136_GPIO_LED_WPS_GREEN,
+               .active_low     = 1,
+       },
+       {
+-              .name           = "qca:red:wps",
++              .name           = "ap136:red:wps",
+               .gpio           = AP136_GPIO_LED_WPS_RED,
+               .active_low     = 1,
+       },
+       {
+-              .name           = "qca:red:wlan-2g",
++              .name           = "ap136:red:wlan-2g",
+               .gpio           = AP136_GPIO_LED_WLAN_2G,
+               .active_low     = 1,
+       },
+       {
+-              .name           = "qca:red:usb",
++              .name           = "ap136:red:usb",
+               .gpio           = AP136_GPIO_LED_USB,
+               .active_low     = 1,
+       }
+@@ -98,65 +106,169 @@ static struct gpio_keys_button ap136_gpi
+       },
+ };
+ 
+-static struct ath79_spi_controller_data ap136_spi0_data = {
+-      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-      .cs_line = 0,
++static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg;
++static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg;
++
++static struct ar8327_platform_data ap136_ar8327_data = {
++      .pad0_cfg = &ap136_ar8327_pad0_cfg,
++      .pad6_cfg = &ap136_ar8327_pad6_cfg,
++      .port0_cfg = {
++              .force_link = 1,
++              .speed = AR8327_PORT_SPEED_1000,
++              .duplex = 1,
++              .txpause = 1,
++              .rxpause = 1,
++      },
++      .port6_cfg = {
++              .force_link = 1,
++              .speed = AR8327_PORT_SPEED_1000,
++              .duplex = 1,
++              .txpause = 1,
++              .rxpause = 1,
++      },
+ };
+ 
+-static struct spi_board_info ap136_spi_info[] = {
++static struct mdio_board_info ap136_mdio0_info[] = {
+       {
+-              .bus_num        = 0,
+-              .chip_select    = 0,
+-              .max_speed_hz   = 25000000,
+-              .modalias       = "mx25l6405d",
+-              .controller_data = &ap136_spi0_data,
+-      }
++              .bus_id = "ag71xx-mdio.0",
++              .phy_addr = 0,
++              .platform_data = &ap136_ar8327_data,
++      },
+ };
+ 
+-static struct ath79_spi_platform_data ap136_spi_data = {
+-      .bus_num        = 0,
+-      .num_chipselect = 1,
+-};
++static void __init ap136_gmac_setup(void)
++{
++      void __iomem *base;
++      u32 t;
+ 
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ap136_ath9k_data;
++      base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
+ 
+-static int ap136_pci_plat_dev_init(struct pci_dev *dev)
+-{
+-      if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
+-              dev->dev.platform_data = &ap136_ath9k_data;
++      t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
+ 
+-      return 0;
+-}
++      t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
++      t |= QCA955X_ETH_CFG_RGMII_EN;
+ 
+-static void __init ap136_pci_init(u8 *eeprom)
+-{
+-      memcpy(ap136_ath9k_data.eeprom_data, eeprom,
+-             sizeof(ap136_ath9k_data.eeprom_data));
++      __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
+ 
+-      ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
+-      ath79_register_pci();
++      iounmap(base);
+ }
+-#else
+-static inline void ap136_pci_init(void) {}
+-#endif /* CONFIG_PCI */
+ 
+-static void __init ap136_setup(void)
++static void __init ap136_common_setup(void)
+ {
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ 
++      ath79_register_m25p80(NULL);
++
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
+                                ap136_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(ap136_gpio_keys),
+                                       ap136_gpio_keys);
+-      ath79_register_spi(&ap136_spi_data, ap136_spi_info,
+-                         ARRAY_SIZE(ap136_spi_info));
++
+       ath79_register_usb();
+-      ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
+-      ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
++      ath79_register_nfc();
++
++      ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
++
++      ap136_gmac_setup();
++
++      ath79_register_mdio(0, 0x0);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
++
++      mdiobus_register_board_info(ap136_mdio0_info,
++                                  ARRAY_SIZE(ap136_mdio0_info));
++
++      /* GMAC0 is connected to the RMGII interface */
++      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++      ath79_eth0_data.phy_mask = BIT(0);
++      ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++      ath79_register_eth(0);
++
++      /* GMAC1 is connected tot eh SGMII interface */
++      ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++      ath79_eth1_data.speed = SPEED_1000;
++      ath79_eth1_data.duplex = DUPLEX_FULL;
++
++      ath79_register_eth(1);
++}
++
++static void __init ap136_010_setup(void)
++{
++      u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++      /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */
++      ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
++      ap136_ar8327_pad0_cfg.txclk_delay_en = true;
++      ap136_ar8327_pad0_cfg.rxclk_delay_en = true;
++      ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
++      ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
++
++      /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */
++      ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
++      ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
++      ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
++
++      ath79_eth0_pll_data.pll_1000 = 0xa6000000;
++      ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++      ap136_common_setup();
++      ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
+            "Atheros AP136-010 reference board",
+-           ap136_setup);
++           ap136_010_setup);
++
++static void __init ap136_020_common_setup(void)
++{
++      /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
++      ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
++      ap136_ar8327_pad0_cfg.sgmii_delay_en = true;
++
++      /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
++      ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII;
++      ap136_ar8327_pad6_cfg.txclk_delay_en = true;
++      ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
++      ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
++      ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
++
++      ath79_eth0_pll_data.pll_1000 = 0x56000000;
++      ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++      ap136_common_setup();
++}
++
++static void __init ap136_020_setup(void)
++{
++      u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++      ap136_020_common_setup();
++      ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020",
++           "Atheros AP136-020 reference board",
++           ap136_020_setup);
++
++/*
++ * AP135-020 is similar to AP136-020, any future AP135 specific init
++ * code can be added here.
++ */
++static void __init ap135_020_setup(void)
++{
++      ap136_leds_gpio[0].name = "ap135:green:status";
++      ap136_leds_gpio[1].name = "ap135:red:status";
++      ap136_leds_gpio[2].name = "ap135:green:wps";
++      ap136_leds_gpio[3].name = "ap135:red:wps";
++      ap136_leds_gpio[4].name = "ap135:red:wlan-2g";
++      ap136_leds_gpio[5].name = "ap135:red:usb";
++
++      ap136_020_common_setup();
++      ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020",
++           "Atheros AP135-020 reference board",
++           ap135_020_setup);
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -18,7 +18,9 @@ enum ath79_mach_type {
+       ATH79_MACH_GENERIC = 0,
+       ATH79_MACH_AP121,               /* Atheros AP121 reference board */
+       ATH79_MACH_AP121_MINI,          /* Atheros AP121-MINI reference board */
++      ATH79_MACH_AP135_020,           /* Atheros AP135-020 reference board */
+       ATH79_MACH_AP136_010,           /* Atheros AP136-010 reference board */
++      ATH79_MACH_AP136_020,           /* Atheros AP136-020 reference board */
+       ATH79_MACH_AP81,                /* Atheros AP81 reference board */
+       ATH79_MACH_DB120,               /* Atheros DB120 reference board */
+       ATH79_MACH_PB44,                /* Atheros PB44 reference board */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -16,16 +16,17 @@ config ATH79_MACH_AP121
+         Atheros AP121 reference board.
+ 
+ config ATH79_MACH_AP136
+-      bool "Atheros AP136 reference board"
++      bool "Atheros AP136/AP135 reference board"
+       select SOC_QCA955X
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_NFC
+       select ATH79_DEV_SPI
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       help
+         Say 'Y' here if you want your kernel to support the
+-        Atheros AP136 reference board.
++        Atheros AP136 or AP135 reference boards.
+ 
+ config ATH79_MACH_AP81
+       bool "Atheros AP81 reference board"

diff --git a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
new file mode 100644 (file)
index 0000000..d2dbb59
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
@@ -0,0 +1,951 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -16,22 +16,124 @@
+ 
+ enum ath79_mach_type {
+       ATH79_MACH_GENERIC = 0,
++      ATH79_MACH_ALFA_AP96,           /* ALFA Network AP96 board */
++      ATH79_MACH_ALFA_NX,             /* ALFA Network N2/N5 board */
++      ATH79_MACH_ALL0258N,            /* Allnet ALL0258N */
++      ATH79_MACH_ALL0305,             /* Allnet ALL0305 */
++      ATH79_MACH_ALL0315N,            /* Allnet ALL0315N */
++      ATH79_MACH_AP113,               /* Atheros AP113 reference board */
+       ATH79_MACH_AP121,               /* Atheros AP121 reference board */
+       ATH79_MACH_AP121_MINI,          /* Atheros AP121-MINI reference board */
++      ATH79_MACH_AP132,               /* Atheros AP132 reference board */
+       ATH79_MACH_AP135_020,           /* Atheros AP135-020 reference board */
+       ATH79_MACH_AP136_010,           /* Atheros AP136-010 reference board */
+       ATH79_MACH_AP136_020,           /* Atheros AP136-020 reference board */
+       ATH79_MACH_AP81,                /* Atheros AP81 reference board */
++      ATH79_MACH_AP83,                /* Atheros AP83 */
++      ATH79_MACH_AP96,                /* Atheros AP96 */
++      ATH79_MACH_ARCHER_C7,           /* TP-LINK Archer C7 board */
++      ATH79_MACH_AW_NR580,            /* AzureWave AW-NR580 */
++      ATH79_MACH_CAP4200AG,           /* Senao CAP4200AG */
+       ATH79_MACH_DB120,               /* Atheros DB120 reference board */
+       ATH79_MACH_PB44,                /* Atheros PB44 reference board */
++      ATH79_MACH_DIR_600_A1,          /* D-Link DIR-600 rev. A1 */
++      ATH79_MACH_DIR_615_C1,          /* D-Link DIR-615 rev. C1 */
++      ATH79_MACH_DIR_615_E4,          /* D-Link DIR-615 rev. E4 */
++      ATH79_MACH_DIR_825_B1,          /* D-Link DIR-825 rev. B1 */
++      ATH79_MACH_DIR_825_C1,          /* D-Link DIR-825 rev. C1 */
++      ATH79_MACH_DIR_835_A1,          /* D-Link DIR-835 rev. A1 */
++      ATH79_MACH_EW_DORIN,            /* embedded wireless Dorin Platform */
++      ATH79_MACH_EW_DORIN_ROUTER,     /* embedded wireless Dorin Router Platform */
++      ATH79_MACH_EAP7660D,            /* Senao EAP7660D */
++      ATH79_MACH_JA76PF,              /* jjPlus JA76PF */
++      ATH79_MACH_JA76PF2,             /* jjPlus JA76PF2 */
++      ATH79_MACH_JWAP003,             /* jjPlus JWAP003 */
++      ATH79_MACH_HORNET_UB,           /* ALFA Networks Hornet-UB */
++      ATH79_MACH_MR600V2,             /* OpenMesh MR600v2 */
++      ATH79_MACH_MR600,               /* OpenMesh MR600 */
++      ATH79_MACH_MZK_W04NU,           /* Planex MZK-W04NU */
++      ATH79_MACH_MZK_W300NH,          /* Planex MZK-W300NH */
++      ATH79_MACH_NBG460N,             /* Zyxel NBG460N/550N/550NH */
++      ATH79_MACH_OM2P_HS,             /* OpenMesh OM2P-HS */
++      ATH79_MACH_OM2P_LC,             /* OpenMesh OM2P-LC */
++      ATH79_MACH_OM2P,                /* OpenMesh OM2P */
++      ATH79_MACH_PB42,                /* Atheros PB42 */
++      ATH79_MACH_PB92,                /* Atheros PB92 */
++      ATH79_MACH_RB_411,              /* MikroTik RouterBOARD 411/411A/411AH */
++      ATH79_MACH_RB_411U,             /* MikroTik RouterBOARD 411U */
++      ATH79_MACH_RB_433,              /* MikroTik RouterBOARD 433/433AH */
++      ATH79_MACH_RB_433U,             /* MikroTik RouterBOARD 433UAH */
++      ATH79_MACH_RB_435G,             /* MikroTik RouterBOARD 435G */
++      ATH79_MACH_RB_450G,             /* MikroTik RouterBOARD 450G */
++      ATH79_MACH_RB_450,              /* MikroTik RouterBOARD 450 */
++      ATH79_MACH_RB_493,              /* Mikrotik RouterBOARD 493/493AH */
++      ATH79_MACH_RB_493G,             /* Mikrotik RouterBOARD 493G */
++      ATH79_MACH_RB_750,              /* MikroTik RouterBOARD 750 */
++      ATH79_MACH_RB_750G_R3,          /* MikroTik RouterBOARD 750GL */
++      ATH79_MACH_RB_751,              /* MikroTik RouterBOARD 751 */
++      ATH79_MACH_RB_751G,             /* Mikrotik RouterBOARD 751G */
++      ATH79_MACH_RB_951G,             /* Mikrotik RouterBOARD 951G */
++      ATH79_MACH_RB_2011G,            /* Mikrotik RouterBOARD 2011UAS-2HnD */
++      ATH79_MACH_RB_2011L,            /* Mikrotik RouterBOARD 2011L */
++      ATH79_MACH_RB_2011US,           /* Mikrotik RouterBOARD 2011UAS */
++      ATH79_MACH_RW2458N,             /* Redwave RW2458N */
++      ATH79_MACH_TEW_632BRP,          /* TRENDnet TEW-632BRP */
++      ATH79_MACH_TEW_673GRU,          /* TRENDnet TEW-673GRU */
++      ATH79_MACH_TEW_712BR,           /* TRENDnet TEW-712BR */
++      ATH79_MACH_TL_MR11U,            /* TP-LINK TL-MR11U */
++      ATH79_MACH_TL_MR3020,           /* TP-LINK TL-MR3020 */
++      ATH79_MACH_TL_MR3040,           /* TP-LINK TL-MR3040 */
++      ATH79_MACH_TL_MR3220,           /* TP-LINK TL-MR3220 */
++      ATH79_MACH_TL_MR3220_V2,        /* TP-LINK TL-MR3220 v2 */
++      ATH79_MACH_TL_MR3420,           /* TP-LINK TL-MR3420 */
++      ATH79_MACH_TL_MR3420_V2,        /* TP-LINK TL-MR3420 v2 */
++      ATH79_MACH_TL_WA7510N_V1,       /* TP-LINK TL-WA7510N v1*/
++      ATH79_MACH_TL_WA901ND,          /* TP-LINK TL-WA901ND */
++      ATH79_MACH_TL_WA901ND_V2,       /* TP-LINK TL-WA901ND v2 */
++      ATH79_MACH_TL_WDR3500,          /* TP-LINK TL-WDR3500 */
++      ATH79_MACH_TL_WDR4300,          /* TP-LINK TL-WDR4300 */
++      ATH79_MACH_TL_WR1041N_V2,       /* TP-LINK TL-WR1041N v2 */
++      ATH79_MACH_TL_WR1043ND,         /* TP-LINK TL-WR1043ND */
++      ATH79_MACH_TL_WR2543N,          /* TP-LINK TL-WR2543N/ND */
++      ATH79_MACH_TL_WR703N,           /* TP-LINK TL-WR703N */
++      ATH79_MACH_TL_WR720N_V3,        /* TP-LINK TL-WR720N v3 */
++      ATH79_MACH_TL_WR741ND,          /* TP-LINK TL-WR741ND */
++      ATH79_MACH_TL_WR741ND_V4,       /* TP-LINK TL-WR741ND  v4*/
++      ATH79_MACH_TL_WR841N_V1,        /* TP-LINK TL-WR841N v1 */
++      ATH79_MACH_TL_WR841N_V7,        /* TP-LINK TL-WR841N/ND v7 */
++      ATH79_MACH_TL_WR841N_V8,        /* TP-LINK TL-WR841N/ND v8 */
++      ATH79_MACH_TL_WR941ND,          /* TP-LINK TL-WR941ND */
+       ATH79_MACH_UBNT_AIRROUTER,      /* Ubiquiti AirRouter */
+       ATH79_MACH_UBNT_BULLET_M,       /* Ubiquiti Bullet M */
++      ATH79_MACH_UBNT_LSSR71,         /* Ubiquiti LS-SR71 */
++      ATH79_MACH_UBNT_LSX,            /* Ubiquiti LSX */
+       ATH79_MACH_UBNT_NANO_M,         /* Ubiquiti NanoStation M */
+       ATH79_MACH_UBNT_ROCKET_M,       /* Ubiquiti Rocket M */
++      ATH79_MACH_UBNT_RSPRO,          /* Ubiquiti RouterStation Pro */
++      ATH79_MACH_UBNT_RS,             /* Ubiquiti RouterStation */
+       ATH79_MACH_UBNT_UAP_PRO,        /* Ubiquiti UniFi AP Pro */
+       ATH79_MACH_UBNT_UNIFI,          /* Ubiquiti Unifi */
+       ATH79_MACH_UBNT_UNIFI_OUTDOOR,  /* Ubiquiti UnifiAP Outdoor */
+       ATH79_MACH_UBNT_XM,             /* Ubiquiti Networks XM board rev 1.0 */
++      ATH79_MACH_WHR_G301N,           /* Buffalo WHR-G301N */
++      ATH79_MACH_WHR_HP_G300N,        /* Buffalo WHR-HP-G300N */
++      ATH79_MACH_WHR_HP_GN,           /* Buffalo WHR-HP-GN */
++      ATH79_MACH_WLAE_AG300N,         /* Buffalo WLAE-AG300N */
++      ATH79_MACH_WNDAP360,            /* NETGEAR WNDAP360 */
++      ATH79_MACH_WNDR3700,            /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
++      ATH79_MACH_WNDR4300,            /* NETGEAR WNDR4300 */
++      ATH79_MACH_WNR2000,             /* NETGEAR WNR2000 */
++      ATH79_MACH_WNR2000_V3,          /* NETGEAR WNR2000 v3 */
++      ATH79_MACH_WP543,               /* Compex WP543 */
++      ATH79_MACH_WPE72,               /* Compex WPE72 */
++      ATH79_MACH_WRT160NL,            /* Linksys WRT160NL */
++      ATH79_MACH_WRT400N,             /* Linksys WRT400N */
++      ATH79_MACH_WZR_HP_AG300H,       /* Buffalo WZR-HP-AG300H */
++      ATH79_MACH_WZR_HP_G300NH,       /* Buffalo WZR-HP-G300NH */
++      ATH79_MACH_WZR_HP_G300NH2,      /* Buffalo WZR-HP-G300NH2 */
++      ATH79_MACH_WZR_HP_G450H,        /* Buffalo WZR-HP-G450H */
++      ATH79_MACH_ZCN_1523H_2,         /* Zcomax ZCN-1523H-2-xx */
++      ATH79_MACH_ZCN_1523H_5,         /* Zcomax ZCN-1523H-5-xx */
+ };
+ 
+ #endif /* _ATH79_MACHTYPE_H */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -2,6 +2,61 @@ if ATH79
+ 
+ menu "Atheros AR71XX/AR724X/AR913X machine selection"
+ 
++config ATH79_MACH_ALFA_AP96
++      bool "ALFA Network AP96 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_SPI
++      select ATH79_DEV_USB
++
++config ATH79_MACH_HORNET_UB
++      bool "ALFA Network Hornet-UB board support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_ALFA_NX
++      bool "ALFA Network N2/N5 board support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_ALL0258N
++      bool "Allnet ALL0258N support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_ALL0315N
++      bool "Allnet ALL0315N support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_AP113
++      bool "Atheros AP113 board support"
++      select SOC_AR724X
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_PB9X_PCI if PCI
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_USB
++      select ATH79_DEV_ETH
++
+ config ATH79_MACH_AP121
+       bool "Atheros AP121 reference board"
+       select SOC_AR933X
+@@ -15,6 +70,18 @@ config ATH79_MACH_AP121
+         Say 'Y' here if you want your kernel to support the
+         Atheros AP121 reference board.
+ 
++config ATH79_MACH_AP132
++      bool "Atheros AP132 reference board"
++      select SOC_QCA955X
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_SPI
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++      help
++        Say 'Y' here if you want your kernel to support the
++        Atheros AP132 reference boards.
++
+ config ATH79_MACH_AP136
+       bool "Atheros AP136/AP135 reference board"
+       select SOC_QCA955X
+@@ -41,6 +108,24 @@ config ATH79_MACH_AP81
+         Say 'Y' here if you want your kernel to support the
+         Atheros AP81 reference board.
+ 
++config ATH79_MACH_AP83
++      bool "Atheros AP83 board support"
++      select SOC_AR913X
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_AP96
++      bool "Atheros AP96 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
+ config ATH79_MACH_DB120
+       bool "Atheros DB120 reference board"
+       select SOC_AR934X
+@@ -56,6 +141,13 @@ config ATH79_MACH_DB120
+         Say 'Y' here if you want your kernel to support the
+         Atheros DB120 reference board.
+ 
++config ATH79_MACH_PB42
++      bool "Atheros PB42 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_M25P80
++
+ config ATH79_MACH_PB44
+       bool "Atheros PB44 reference board"
+       select SOC_AR71XX
+@@ -68,6 +160,561 @@ config ATH79_MACH_PB44
+         Say 'Y' here if you want your kernel to support the
+         Atheros PB44 reference board.
+ 
++config ATH79_MACH_PB92
++      bool "Atheros PB92 board support"
++      select SOC_AR724X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_PB9X_PCI if PCI
++      select ATH79_DEV_USB
++
++config ATH79_MACH_AW_NR580
++      bool "AzureWave AW-NR580 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_WHR_HP_G300N
++      bool "Buffalo WHR-HP-G300N board support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_WLAE_AG300N
++      bool "Buffalo WLAE-AG300N board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_WZR_HP_AG300H
++      bool "Buffalo WZR-HP-AG300H board support"
++      select SOC_AR71XX
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_WZR_HP_G300NH
++      bool "Buffalo WZR-HP-G300NH board support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++      select RTL8366_SMI
++
++config ATH79_MACH_WZR_HP_G300NH2
++      bool "Buffalo WZR-HP-G300NH2 board support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_WZR_HP_G450H
++      bool "Buffalo WZR-HP-G450H board support"
++      select SOC_AR724X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_WP543
++      bool "Compex WP543/WPJ543 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select MYLOADER
++
++config ATH79_MACH_WPE72
++      bool "Compex WPE72/WPE72NX board support"
++      select SOC_AR724X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select MYLOADER
++
++config ATH79_MACH_DIR_600_A1
++      bool "D-Link DIR-600 A1/DIR-615 E4 support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_NVRAM
++
++config ATH79_MACH_DIR_615_C1
++      bool "D-Link DIR-615 rev. C1 support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++      select ATH79_NVRAM
++
++config ATH79_MACH_DIR_825_B1
++      bool "D-Link DIR-825 rev. B1 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_DIR_825_C1
++      bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support"
++      select SOC_AR934X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_EW_DORIN
++      bool "embedded wireless Dorin Platform support"
++      select SOC_AR933X
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_WMAC
++      select ATH79_DEV_ETH
++      help
++        Say 'Y' here if you want your kernel to support the
++        Dorin Platform from www.80211.de .
++
++config ATH79_MACH_JA76PF
++      bool "jjPlus JA76PF board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_JWAP003
++      bool "jjPlus JWAP003 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_WRT160NL
++      bool "Linksys WRT160NL board support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++      select ATH79_NVRAM
++
++config ATH79_MACH_WRT400N
++      bool "Linksys WRT400N board support"
++      select SOC_AR71XX
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_RB4XX
++      bool "MikroTik RouterBOARD 4xx series support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_USB
++
++config ATH79_MACH_RB750
++      bool "MikroTik RouterBOARD 750 support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_USB
++      select ATH79_ROUTERBOOT
++      select RLE_DECOMPRESS
++
++config ATH79_MACH_RB95X
++       bool "MikroTik RouterBOARD 95X support"
++       select SOC_AR934x
++       select ATH79_DEV_ETH
++       select ATH79_DEV_NFC
++       select ATH79_DEV_WMAC
++       select ATH79_DEV_USB
++       select ATH79_ROUTERBOOT
++       select RLE_DECOMPRESS
++
++config ATH79_MACH_RB2011
++      bool "MikroTik RouterBOARD 2011 support"
++      select SOC_AR934x
++      select ATH79_DEV_ETH
++      select ATH79_DEV_NFC
++      select ATH79_DEV_WMAC
++      select ATH79_ROUTERBOOT
++
++config ATH79_MACH_WNDAP360
++      bool "NETGEAR WNDAP360 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_WNDR3700
++      bool "NETGEAR WNDR3700 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_WNDR4300
++      bool "NETGEAR WNDR4300 board support"
++      select SOC_AR934X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_NFC
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_WNR2000
++      bool "NETGEAR WNR2000 board support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_WNR2000_V3
++      bool "NETGEAR WNR2000 V3 board support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_OM2P
++      bool "OpenMesh OM2P board support"
++      select SOC_AR724X
++      select SOC_AR933X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_MR600
++      bool "OpenMesh MR600 board support"
++      select SOC_AR934X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_MZK_W04NU
++      bool "Planex MZK-W04NU board support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_MZK_W300NH
++      bool "Planex MZK-W300NH board support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_RW2458N
++      bool "Redwave RW2458N board support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_CAP4200AG
++      bool "Senao CAP4200AG support"
++      select SOC_AR934X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_EAP7660D
++      bool "Senao EAP7660D support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_ARCHER_C7
++      bool "TP-LINK Archer C7 board support"
++      select SOC_QCA955X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_SPI
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR11U
++      bool "TP-LINK TL-MR11U/TL-MR3040 support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR3020
++      bool "TP-LINK TL-MR3020 support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR3X20
++      bool "TP-LINK TL-MR3220/3420 support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_TL_WA901ND
++      bool "TP-LINK TL-WA901ND/TL-WA7510N support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WA901ND_V2
++      bool "TP-LINK TL-WA901ND v2 support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WDR3500
++      bool "TP-LINK TL-WDR3500 board support"
++      select SOC_AR934X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WDR4300
++      bool "TP-LINK TL-WDR3600/4300/4310 board support"
++      select SOC_AR934X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR703N
++      bool "TP-LINK TL-WR703N support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR720N_V3
++      bool "TP-LINK TL-WR720N v3 support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR741ND
++      bool "TP-LINK TL-WR741ND support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WR741ND_V4
++      bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR841N_V1
++      bool "TP-LINK TL-WR841N v1 support"
++      select SOC_AR71XX
++      select ATH79_DEV_DSA
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WR841N_V8
++      bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support"
++      select SOC_AR934X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR941ND
++      bool "TP-LINK TL-WR941ND support"
++      select SOC_AR913X
++      select ATH79_DEV_DSA
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR1041N_V2
++      bool "TP-LINK TL-WR1041N v2 support"
++      select SOC_AR934X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR1043ND
++      bool "TP-LINK TL-WR1043ND support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR2543N
++      bool "TP-LINK TL-WR2543N/ND support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
++config ATH79_MACH_TEW_632BRP
++      bool "TRENDnet TEW-632BRP support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++      select ATH79_NVRAM
++
++config ATH79_MACH_TEW_673GRU
++      bool "TRENDnet TEW-673GRU support"
++      select SOC_AR71XX
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_NVRAM
++
++config ATH79_MACH_TEW_712BR
++      bool "TRENDnet TEW-712BR support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++      select ATH79_NVRAM
++
++config ATH79_MACH_UBNT
++      bool "Ubiquiti AR71xx based boards support"
++      select SOC_AR71XX
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
+ config ATH79_MACH_UBNT_XM
+       bool "Ubiquiti Networks XM/UniFi boards"
+       select SOC_AR724X
+@@ -83,6 +730,24 @@ config ATH79_MACH_UBNT_XM
+         Say 'Y' here if you want your kernel to support the
+         Ubiquiti Networks XM (rev 1.0) board.
+ 
++config ATH79_MACH_ZCN_1523H
++      bool "Zcomax ZCN-1523H support"
++      select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++
++config ATH79_MACH_NBG460N
++      bool "Zyxel NBG460N/550N/550NH board support"
++      select SOC_AR913X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++
+ endmenu
+ 
+ config SOC_AR71XX
+@@ -132,7 +797,10 @@ config ATH79_DEV_DSA
+ config ATH79_DEV_ETH
+       def_bool n
+ 
+-config PCI_AR724X
++config ATH79_DEV_DSA
++      def_bool n
++
++config ATH79_DEV_ETH
+       def_bool n
+ 
+ config ATH79_DEV_GPIO_BUTTONS
+@@ -164,4 +832,7 @@ config ATH79_PCI_ATH9K_FIXUP
+ config ATH79_ROUTERBOOT
+       def_bool n
+ 
++config PCI_AR724X
++      def_bool n
++
+ endif
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -38,9 +38,78 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)              += route
+ #
+ # Machines
+ #
++obj-$(CONFIG_ATH79_MACH_ALFA_AP96)    += mach-alfa-ap96.o
++obj-$(CONFIG_ATH79_MACH_ALFA_NX)      += mach-alfa-nx.o
++obj-$(CONFIG_ATH79_MACH_ALL0258N)     += mach-all0258n.o
++obj-$(CONFIG_ATH79_MACH_ALL0315N)     += mach-all0315n.o
++obj-$(CONFIG_ATH79_MACH_AP113)                += mach-ap113.o
+ obj-$(CONFIG_ATH79_MACH_AP121)                += mach-ap121.o
++obj-$(CONFIG_ATH79_MACH_AP132)                += mach-ap132.o
+ obj-$(CONFIG_ATH79_MACH_AP136)                += mach-ap136.o
+ obj-$(CONFIG_ATH79_MACH_AP81)         += mach-ap81.o
++obj-$(CONFIG_ATH79_MACH_AP83)         += mach-ap83.o
++obj-$(CONFIG_ATH79_MACH_AP96)         += mach-ap96.o
++obj-$(CONFIG_ATH79_MACH_ARCHER_C7)    += mach-archer-c7.o
++obj-$(CONFIG_ATH79_MACH_AW_NR580)     += mach-aw-nr580.o
++obj-$(CONFIG_ATH79_MACH_CAP4200AG)    += mach-cap4200ag.o
+ obj-$(CONFIG_ATH79_MACH_DB120)                += mach-db120.o
++obj-$(CONFIG_ATH79_MACH_DIR_600_A1)   += mach-dir-600-a1.o
++obj-$(CONFIG_ATH79_MACH_DIR_615_C1)   += mach-dir-615-c1.o
++obj-$(CONFIG_ATH79_MACH_DIR_825_B1)   += mach-dir-825-b1.o
++obj-$(CONFIG_ATH79_MACH_DIR_825_C1)   += mach-dir-825-c1.o
++obj-$(CONFIG_ATH79_MACH_EW_DORIN)     += mach-ew-dorin.o
++obj-$(CONFIG_ATH79_MACH_EAP7660D)     += mach-eap7660d.o
++obj-$(CONFIG_ATH79_MACH_JA76PF)               += mach-ja76pf.o
++obj-$(CONFIG_ATH79_MACH_JWAP003)      += mach-jwap003.o
++obj-$(CONFIG_ATH79_MACH_HORNET_UB)    += mach-hornet-ub.o
++obj-$(CONFIG_ATH79_MACH_MR600)                += mach-mr600.o
++obj-$(CONFIG_ATH79_MACH_MZK_W04NU)    += mach-mzk-w04nu.o
++obj-$(CONFIG_ATH79_MACH_MZK_W300NH)   += mach-mzk-w300nh.o
++obj-$(CONFIG_ATH79_MACH_NBG460N)      += mach-nbg460n.o
++obj-$(CONFIG_ATH79_MACH_OM2P)         += mach-om2p.o
++obj-$(CONFIG_ATH79_MACH_PB42)         += mach-pb42.o
+ obj-$(CONFIG_ATH79_MACH_PB44)         += mach-pb44.o
++obj-$(CONFIG_ATH79_MACH_PB92)         += mach-pb92.o
++obj-$(CONFIG_ATH79_MACH_RB4XX)                += mach-rb4xx.o
++obj-$(CONFIG_ATH79_MACH_RB750)                += mach-rb750.o
++obj-$(CONFIG_ATH79_MACH_RB95X)                += mach-rb95x.o
++obj-$(CONFIG_ATH79_MACH_RB2011)               += mach-rb2011.o
++obj-$(CONFIG_ATH79_MACH_RW2458N)      += mach-rw2458n.o
++obj-$(CONFIG_ATH79_MACH_TEW_632BRP)   += mach-tew-632brp.o
++obj-$(CONFIG_ATH79_MACH_TEW_673GRU)   += mach-tew-673gru.o
++obj-$(CONFIG_ATH79_MACH_TEW_712BR)    += mach-tew-712br.o
++obj-$(CONFIG_ATH79_MACH_TL_MR11U)     += mach-tl-mr11u.o
++obj-$(CONFIG_ATH79_MACH_TL_MR3020)    += mach-tl-mr3020.o
++obj-$(CONFIG_ATH79_MACH_TL_MR3X20)    += mach-tl-mr3x20.o
++obj-$(CONFIG_ATH79_MACH_TL_WA901ND)   += mach-tl-wa901nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2)        += mach-tl-wa901nd-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WDR3500)     += mach-tl-wdr3500.o
++obj-$(CONFIG_ATH79_MACH_TL_WDR4300)     += mach-tl-wdr4300.o
++obj-$(CONFIG_ATH79_MACH_TL_WR741ND)   += mach-tl-wr741nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4)        += mach-tl-wr741nd-v4.o
++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o
++obj-$(CONFIG_ATH79_MACH_TL_WR941ND)   += mach-tl-wr941nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2)        += mach-tl-wr1041n-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WR1043ND)  += mach-tl-wr1043nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR2543N)   += mach-tl-wr2543n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR703N)    += mach-tl-wr703n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o
++obj-$(CONFIG_ATH79_MACH_UBNT)         += mach-ubnt.o
+ obj-$(CONFIG_ATH79_MACH_UBNT_XM)      += mach-ubnt-xm.o
++obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
++obj-$(CONFIG_ATH79_MACH_WLAE_AG300N)  += mach-wlae-ag300n.o
++obj-$(CONFIG_ATH79_MACH_WNDAP360)     += mach-wndap360.o
++obj-$(CONFIG_ATH79_MACH_WNDR3700)     += mach-wndr3700.o
++obj-$(CONFIG_ATH79_MACH_WNDR4300)     += mach-wndr4300.o
++obj-$(CONFIG_ATH79_MACH_WNR2000)      += mach-wnr2000.o
++obj-$(CONFIG_ATH79_MACH_WNR2000_V3)   += mach-wnr2000-v3.o
++obj-$(CONFIG_ATH79_MACH_WP543)                += mach-wp543.o
++obj-$(CONFIG_ATH79_MACH_WPE72)                += mach-wpe72.o
++obj-$(CONFIG_ATH79_MACH_WRT160NL)     += mach-wrt160nl.o
++obj-$(CONFIG_ATH79_MACH_WRT400N)      += mach-wrt400n.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH)        += mach-wzr-hp-g300nh.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2)       += mach-wzr-hp-g300nh2.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H)        += mach-wzr-hp-ag300h.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
++obj-$(CONFIG_ATH79_MACH_ZCN_1523H)    += mach-zcn-1523h.o
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -180,6 +180,11 @@ void __init prom_init(void)
+                       ath79_prom_append_cmdline("board", env);
+               }
+       }
++
++      if (strstr(arcs_cmdline, "board=750Gr3") ||
++          strstr(arcs_cmdline, "board=951G") ||
++          strstr(arcs_cmdline, "board=2011L"))
++              ath79_prom_append_cmdline("console", "ttyS0,115200");
+ }
+ 
+ void __init prom_free_prom_memory(void)

diff --git a/target/linux/ar71xx/patches-3.10/901-mdio_bitbang_ignore_ta_value.patch b/target/linux/ar71xx/patches-3.10/901-mdio_bitbang_ignore_ta_value.patch
new file mode 100644 (file)
index 0000000..39584aa
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/901-mdio_bitbang_ignore_ta_value.patch
@@ -0,0 +1,20 @@
+--- a/drivers/net/phy/mdio-bitbang.c
++++ b/drivers/net/phy/mdio-bitbang.c
+@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *b
+ 
+       ctrl->ops->set_mdio_dir(ctrl, 0);
+ 
+-      /* check the turnaround bit: the PHY should be driving it to zero */
+-      if (mdiobb_get_bit(ctrl) != 0) {
+-              /* PHY didn't drive TA low -- flush any bits it
+-               * may be trying to send.
+-               */
+-              for (i = 0; i < 32; i++)
+-                      mdiobb_get_bit(ctrl);
+-
+-              return 0xffff;
+-      }
++      mdiobb_get_bit(ctrl);
+ 
+       ret = mdiobb_get_num(ctrl, 16);
+       mdiobb_get_bit(ctrl);

diff --git a/target/linux/ar71xx/patches-3.10/902-unaligned_access_hacks.patch b/target/linux/ar71xx/patches-3.10/902-unaligned_access_hacks.patch
new file mode 100644 (file)
index 0000000..4e7af8d
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/902-unaligned_access_hacks.patch
@@ -0,0 +1,904 @@
+--- a/arch/mips/include/asm/checksum.h
++++ b/arch/mips/include/asm/checksum.h
+@@ -104,26 +104,30 @@ static inline __sum16 ip_fast_csum(const
+       const unsigned int *stop = word + ihl;
+       unsigned int csum;
+       int carry;
++      unsigned int w;
+ 
+-      csum = word[0];
+-      csum += word[1];
+-      carry = (csum < word[1]);
++      csum = net_hdr_word(word++);
++
++      w = net_hdr_word(word++);
++      csum += w;
++      carry = (csum < w);
+       csum += carry;
+ 
+-      csum += word[2];
+-      carry = (csum < word[2]);
++      w = net_hdr_word(word++);
++      csum += w;
++      carry = (csum < w);
+       csum += carry;
+ 
+-      csum += word[3];
+-      carry = (csum < word[3]);
++      w = net_hdr_word(word++);
++      csum += w;
++      carry = (csum < w);
+       csum += carry;
+ 
+-      word += 4;
+       do {
+-              csum += *word;
+-              carry = (csum < *word);
++              w = net_hdr_word(word++);
++              csum += w;
++              carry = (csum < w);
+               csum += carry;
+-              word++;
+       } while (word != stop);
+ 
+       return csum_fold(csum);
+@@ -192,69 +196,4 @@ static inline __sum16 ip_compute_csum(co
+       return csum_fold(csum_partial(buff, len, 0));
+ }
+ 
+-#define _HAVE_ARCH_IPV6_CSUM
+-static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+-                                        const struct in6_addr *daddr,
+-                                        __u32 len, unsigned short proto,
+-                                        __wsum sum)
+-{
+-      __asm__(
+-      "       .set    push            # csum_ipv6_magic\n"
+-      "       .set    noreorder       \n"
+-      "       .set    noat            \n"
+-      "       addu    %0, %5          # proto (long in network byte order)\n"
+-      "       sltu    $1, %0, %5      \n"
+-      "       addu    %0, $1          \n"
+-
+-      "       addu    %0, %6          # csum\n"
+-      "       sltu    $1, %0, %6      \n"
+-      "       lw      %1, 0(%2)       # four words source address\n"
+-      "       addu    %0, $1          \n"
+-      "       addu    %0, %1          \n"
+-      "       sltu    $1, %0, %1      \n"
+-
+-      "       lw      %1, 4(%2)       \n"
+-      "       addu    %0, $1          \n"
+-      "       addu    %0, %1          \n"
+-      "       sltu    $1, %0, %1      \n"
+-
+-      "       lw      %1, 8(%2)       \n"
+-      "       addu    %0, $1          \n"
+-      "       addu    %0, %1          \n"
+-      "       sltu    $1, %0, %1      \n"
+-
+-      "       lw      %1, 12(%2)      \n"
+-      "       addu    %0, $1          \n"
+-      "       addu    %0, %1          \n"
+-      "       sltu    $1, %0, %1      \n"
+-
+-      "       lw      %1, 0(%3)       \n"
+-      "       addu    %0, $1          \n"
+-      "       addu    %0, %1          \n"
+-      "       sltu    $1, %0, %1      \n"
+-
+-      "       lw      %1, 4(%3)       \n"
+-      "       addu    %0, $1          \n"
+-      "       addu    %0, %1          \n"
+-      "       sltu    $1, %0, %1      \n"
+-
+-      "       lw      %1, 8(%3)       \n"
+-      "       addu    %0, $1          \n"
+-      "       addu    %0, %1          \n"
+-      "       sltu    $1, %0, %1      \n"
+-
+-      "       lw      %1, 12(%3)      \n"
+-      "       addu    %0, $1          \n"
+-      "       addu    %0, %1          \n"
+-      "       sltu    $1, %0, %1      \n"
+-
+-      "       addu    %0, $1          # Add final carry\n"
+-      "       .set    pop"
+-      : "=r" (sum), "=r" (proto)
+-      : "r" (saddr), "r" (daddr),
+-        "0" (htonl(len)), "1" (htonl(proto)), "r" (sum));
+-
+-      return csum_fold(sum);
+-}
+-
+ #endif /* _ASM_CHECKSUM_H */
+--- a/include/uapi/linux/ip.h
++++ b/include/uapi/linux/ip.h
+@@ -102,7 +102,7 @@ struct iphdr {
+       __be32  saddr;
+       __be32  daddr;
+       /*The options start here. */
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ struct ip_auth_hdr {
+--- a/include/uapi/linux/ipv6.h
++++ b/include/uapi/linux/ipv6.h
+@@ -125,7 +125,7 @@ struct ipv6hdr {
+ 
+       struct  in6_addr        saddr;
+       struct  in6_addr        daddr;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ /* index values for the variables in ipv6_devconf */
+--- a/include/uapi/linux/tcp.h
++++ b/include/uapi/linux/tcp.h
+@@ -54,7 +54,7 @@ struct tcphdr {
+       __be16  window;
+       __sum16 check;
+       __be16  urg_ptr;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ /*
+  *    The union cast uses a gcc extension to avoid aliasing problems
+@@ -64,7 +64,7 @@ struct tcphdr {
+ union tcp_word_hdr { 
+       struct tcphdr hdr;
+       __be32            words[5];
+-}; 
++} __attribute__((packed, aligned(2)));
+ 
+ #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
+ 
+--- a/include/uapi/linux/udp.h
++++ b/include/uapi/linux/udp.h
+@@ -24,7 +24,7 @@ struct udphdr {
+       __be16  dest;
+       __be16  len;
+       __sum16 check;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ /* UDP socket options */
+ #define UDP_CORK      1       /* Never send partially complete segments */
+--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
++++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+@@ -40,8 +40,8 @@ static bool ipv4_pkt_to_tuple(const stru
+       if (ap == NULL)
+               return false;
+ 
+-      tuple->src.u3.ip = ap[0];
+-      tuple->dst.u3.ip = ap[1];
++      tuple->src.u3.ip = net_hdr_word(ap++);
++      tuple->dst.u3.ip = net_hdr_word(ap);
+ 
+       return true;
+ }
+--- a/include/uapi/linux/icmp.h
++++ b/include/uapi/linux/icmp.h
+@@ -80,7 +80,7 @@ struct icmphdr {
+               __be16  mtu;
+       } frag;
+   } un;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ /*
+--- a/include/uapi/linux/in6.h
++++ b/include/uapi/linux/in6.h
+@@ -36,7 +36,7 @@ struct in6_addr {
+ #define s6_addr                       in6_u.u6_addr8
+ #define s6_addr16             in6_u.u6_addr16
+ #define s6_addr32             in6_u.u6_addr32
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ struct sockaddr_in6 {
+       unsigned short int      sin6_family;    /* AF_INET6 */
+--- a/net/ipv6/af_inet6.c
++++ b/net/ipv6/af_inet6.c
+@@ -60,6 +60,7 @@
+ #endif
+ 
+ #include <asm/uaccess.h>
++#include <asm/unaligned.h>
+ #include <linux/mroute6.h>
+ 
+ MODULE_AUTHOR("Cast of dozens");
+@@ -687,7 +688,7 @@ bool ipv6_opt_accepted(const struct sock
+               if ((opt->hop && (np->rxopt.bits.hopopts ||
+                                 np->rxopt.bits.ohopopts)) ||
+                   ((IPV6_FLOWINFO_MASK &
+-                    *(__be32 *)skb_network_header(skb)) &&
++                    net_hdr_word(skb_network_header(skb))) &&
+                    np->rxopt.bits.rxflow) ||
+                   (opt->srcrt && (np->rxopt.bits.srcrt ||
+                    np->rxopt.bits.osrcrt)) ||
+--- a/net/ipv6/tcp_ipv6.c
++++ b/net/ipv6/tcp_ipv6.c
+@@ -64,6 +64,7 @@
+ #include <net/secure_seq.h>
+ #include <net/tcp_memcontrol.h>
+ 
++#include <asm/unaligned.h>
+ #include <asm/uaccess.h>
+ 
+ #include <linux/proc_fs.h>
+@@ -763,10 +764,10 @@ static void tcp_v6_send_response(struct 
+       topt = (__be32 *)(t1 + 1);
+ 
+       if (tsecr) {
+-              *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
+-                              (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
+-              *topt++ = htonl(tsval);
+-              *topt++ = htonl(tsecr);
++              put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++                              (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++);
++              put_unaligned_be32(tsval, topt++);
++              put_unaligned_be32(tsecr, topt++);
+       }
+ 
+ #ifdef CONFIG_TCP_MD5SIG
+--- a/include/linux/ipv6.h
++++ b/include/linux/ipv6.h
+@@ -4,6 +4,7 @@
+ #include <uapi/linux/ipv6.h>
+ 
+ #define ipv6_optlen(p)  (((p)->hdrlen+1) << 3)
++
+ /*
+  * This structure contains configuration options per IPv6 link.
+  */
+--- a/net/ipv6/datagram.c
++++ b/net/ipv6/datagram.c
+@@ -365,7 +365,7 @@ int ipv6_recv_error(struct sock *sk, str
+                               ipv6_iface_scope_id(&sin->sin6_addr,
+                                                   IP6CB(skb)->iif);
+               } else {
+-                      ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
++                      ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset),
+                                              &sin->sin6_addr);
+                       sin->sin6_scope_id = 0;
+               }
+@@ -687,12 +687,12 @@ int ip6_datagram_send_ctl(struct net *ne
+                       }
+ 
+                       if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
+-                              if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
++                              if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) {
+                                       err = -EINVAL;
+                                       goto exit_f;
+                               }
+                       }
+-                      fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
++                      fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg));
+                       break;
+ 
+               case IPV6_2292HOPOPTS:
+--- a/net/ipv6/ip6_gre.c
++++ b/net/ipv6/ip6_gre.c
+@@ -391,7 +391,7 @@ static void ip6gre_err(struct sk_buff *s
+ 
+       t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr,
+                               flags & GRE_KEY ?
+-                              *(((__be32 *)p) + (grehlen / 4) - 1) : 0,
++                              net_hdr_word(((__be32 *)p) + (grehlen / 4) - 1) : 0,
+                               p[1]);
+       if (t == NULL)
+               return;
+@@ -483,11 +483,11 @@ static int ip6gre_rcv(struct sk_buff *sk
+                       offset += 4;
+               }
+               if (flags&GRE_KEY) {
+-                      key = *(__be32 *)(h + offset);
++                      key = net_hdr_word(h + offset);
+                       offset += 4;
+               }
+               if (flags&GRE_SEQ) {
+-                      seqno = ntohl(*(__be32 *)(h + offset));
++                      seqno = ntohl(net_hdr_word(h + offset));
+                       offset += 4;
+               }
+       }
+@@ -747,7 +747,7 @@ static netdev_tx_t ip6gre_xmit2(struct s
+ 
+               if (tunnel->parms.o_flags&GRE_SEQ) {
+                       ++tunnel->o_seqno;
+-                      *ptr = htonl(tunnel->o_seqno);
++                      net_hdr_word(ptr) = htonl(tunnel->o_seqno);
+                       ptr--;
+               }
+               if (tunnel->parms.o_flags&GRE_KEY) {
+@@ -841,9 +841,9 @@ static inline int ip6gre_xmit_ipv6(struc
+ 
+       dsfield = ipv6_get_dsfield(ipv6h);
+       if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)
+-              fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK);
++              fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_TCLASS_MASK;
+       if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL)
+-              fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_FLOWLABEL_MASK);
++              fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_FLOWLABEL_MASK;
+       if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
+               fl6.flowi6_mark = skb->mark;
+ 
+--- a/net/ipv6/ip6_tunnel.c
++++ b/net/ipv6/ip6_tunnel.c
+@@ -1122,9 +1122,9 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
+ 
+       dsfield = ipv6_get_dsfield(ipv6h);
+       if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)
+-              fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK);
++              fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_TCLASS_MASK;
+       if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL)
+-              fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_FLOWLABEL_MASK);
++              fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_FLOWLABEL_MASK;
+       if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
+               fl6.flowi6_mark = skb->mark;
+ 
+--- a/net/ipv6/exthdrs.c
++++ b/net/ipv6/exthdrs.c
+@@ -579,7 +579,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
+               goto drop;
+       }
+ 
+-      pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
++      pkt_len = ntohl(net_hdr_word(nh + optoff + 2));
+       if (pkt_len <= IPV6_MAXPLEN) {
+               IP6_INC_STATS_BH(net, ipv6_skb_idev(skb),
+                                IPSTATS_MIB_INHDRERRORS);
+--- a/include/linux/types.h
++++ b/include/linux/types.h
+@@ -212,5 +212,11 @@ struct callback_head {
+ };
+ #define rcu_head callback_head
+ 
++struct net_hdr_word {
++       u32 words[1];
++} __attribute__((packed, aligned(2)));
++
++#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0])
++
+ #endif /*  __ASSEMBLY__ */
+ #endif /* _LINUX_TYPES_H */
+--- a/net/ipv4/af_inet.c
++++ b/net/ipv4/af_inet.c
+@@ -1383,8 +1383,8 @@ static struct sk_buff **inet_gro_receive
+       if (unlikely(ip_fast_csum((u8 *)iph, 5)))
+               goto out_unlock;
+ 
+-      id = ntohl(*(__be32 *)&iph->id);
+-      flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id ^ IP_DF));
++      id = ntohl(net_hdr_word(&iph->id));
++      flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id ^ IP_DF));
+       id >>= 16;
+ 
+       for (p = *head; p; p = p->next) {
+--- a/net/ipv4/route.c
++++ b/net/ipv4/route.c
+@@ -461,7 +461,7 @@ static struct neighbour *ipv4_neigh_look
+       else if (skb)
+               pkey = &ip_hdr(skb)->daddr;
+ 
+-      n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey);
++      n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey));
+       if (n)
+               return n;
+       return neigh_create(&arp_tbl, pkey, dev);
+--- a/net/ipv4/tcp_output.c
++++ b/net/ipv4/tcp_output.c
+@@ -412,48 +412,53 @@ static void tcp_options_write(__be32 *pt
+       u16 options = opts->options;    /* mungable copy */
+ 
+       if (unlikely(OPTION_MD5 & options)) {
+-              *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
+-                             (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
++              net_hdr_word(ptr++) =
++                      htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++                            (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
+               /* overload cookie hash location */
+               opts->hash_location = (__u8 *)ptr;
+               ptr += 4;
+       }
+ 
+       if (unlikely(opts->mss)) {
+-              *ptr++ = htonl((TCPOPT_MSS << 24) |
+-                             (TCPOLEN_MSS << 16) |
+-                             opts->mss);
++              net_hdr_word(ptr++) =
++                      htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) |
++                            opts->mss);
+       }
+ 
+       if (likely(OPTION_TS & options)) {
+               if (unlikely(OPTION_SACK_ADVERTISE & options)) {
+-                      *ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
+-                                     (TCPOLEN_SACK_PERM << 16) |
+-                                     (TCPOPT_TIMESTAMP << 8) |
+-                                     TCPOLEN_TIMESTAMP);
++                      net_hdr_word(ptr++) =
++                              htonl((TCPOPT_SACK_PERM << 24) |
++                                    (TCPOLEN_SACK_PERM << 16) |
++                                    (TCPOPT_TIMESTAMP << 8) |
++                                    TCPOLEN_TIMESTAMP);
+                       options &= ~OPTION_SACK_ADVERTISE;
+               } else {
+-                      *ptr++ = htonl((TCPOPT_NOP << 24) |
+-                                     (TCPOPT_NOP << 16) |
+-                                     (TCPOPT_TIMESTAMP << 8) |
+-                                     TCPOLEN_TIMESTAMP);
++                      net_hdr_word(ptr++) =
++                              htonl((TCPOPT_NOP << 24) |
++                                    (TCPOPT_NOP << 16) |
++                                    (TCPOPT_TIMESTAMP << 8) |
++                                    TCPOLEN_TIMESTAMP);
+               }
+-              *ptr++ = htonl(opts->tsval);
+-              *ptr++ = htonl(opts->tsecr);
++              net_hdr_word(ptr++) = htonl(opts->tsval);
++              net_hdr_word(ptr++) = htonl(opts->tsecr);
+       }
+ 
+       if (unlikely(OPTION_SACK_ADVERTISE & options)) {
+-              *ptr++ = htonl((TCPOPT_NOP << 24) |
+-                             (TCPOPT_NOP << 16) |
+-                             (TCPOPT_SACK_PERM << 8) |
+-                             TCPOLEN_SACK_PERM);
++              net_hdr_word(ptr++) =
++                      htonl((TCPOPT_NOP << 24) |
++                            (TCPOPT_NOP << 16) |
++                            (TCPOPT_SACK_PERM << 8) |
++                            TCPOLEN_SACK_PERM);
+       }
+ 
+       if (unlikely(OPTION_WSCALE & options)) {
+-              *ptr++ = htonl((TCPOPT_NOP << 24) |
+-                             (TCPOPT_WINDOW << 16) |
+-                             (TCPOLEN_WINDOW << 8) |
+-                             opts->ws);
++              net_hdr_word(ptr++) =
++                      htonl((TCPOPT_NOP << 24) |
++                            (TCPOPT_WINDOW << 16) |
++                            (TCPOLEN_WINDOW << 8) |
++                            opts->ws);
+       }
+ 
+       if (unlikely(opts->num_sack_blocks)) {
+@@ -461,16 +466,17 @@ static void tcp_options_write(__be32 *pt
+                       tp->duplicate_sack : tp->selective_acks;
+               int this_sack;
+ 
+-              *ptr++ = htonl((TCPOPT_NOP  << 24) |
+-                             (TCPOPT_NOP  << 16) |
+-                             (TCPOPT_SACK <<  8) |
+-                             (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
++              net_hdr_word(ptr++) =
++                      htonl((TCPOPT_NOP << 24) |
++                            (TCPOPT_NOP << 16) |
++                            (TCPOPT_SACK << 8) |
++                            (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
+                                                    TCPOLEN_SACK_PERBLOCK)));
+ 
+               for (this_sack = 0; this_sack < opts->num_sack_blocks;
+                    ++this_sack) {
+-                      *ptr++ = htonl(sp[this_sack].start_seq);
+-                      *ptr++ = htonl(sp[this_sack].end_seq);
++                      net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq);
++                      net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq);
+               }
+ 
+               tp->rx_opt.dsack = 0;
+@@ -479,9 +485,10 @@ static void tcp_options_write(__be32 *pt
+       if (unlikely(OPTION_FAST_OPEN_COOKIE & options)) {
+               struct tcp_fastopen_cookie *foc = opts->fastopen_cookie;
+ 
+-              *ptr++ = htonl((TCPOPT_EXP << 24) |
+-                             ((TCPOLEN_EXP_FASTOPEN_BASE + foc->len) << 16) |
+-                             TCPOPT_FASTOPEN_MAGIC);
++              net_hdr_word(ptr++) =
++                      htonl((TCPOPT_EXP << 24) |
++                            ((TCPOLEN_EXP_FASTOPEN_BASE + foc->len) << 16) |
++                            TCPOPT_FASTOPEN_MAGIC);
+ 
+               memcpy(ptr, foc->val, foc->len);
+               if ((foc->len & 3) == 2) {
+--- a/net/ipv4/igmp.c
++++ b/net/ipv4/igmp.c
+@@ -470,7 +470,7 @@ static struct sk_buff *add_grec(struct s
+               if (!skb)
+                       return NULL;
+               psrc = (__be32 *)skb_put(skb, sizeof(__be32));
+-              *psrc = psf->sf_inaddr;
++              net_hdr_word(psrc) = psf->sf_inaddr;
+               scount++; stotal++;
+               if ((type == IGMPV3_ALLOW_NEW_SOURCES ||
+                    type == IGMPV3_BLOCK_OLD_SOURCES) && psf->sf_crcount) {
+--- a/include/uapi/linux/igmp.h
++++ b/include/uapi/linux/igmp.h
+@@ -32,7 +32,7 @@ struct igmphdr {
+       __u8 code;              /* For newer IGMP */
+       __sum16 csum;
+       __be32 group;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ /* V3 group record types [grec_type] */
+ #define IGMPV3_MODE_IS_INCLUDE                1
+@@ -48,7 +48,7 @@ struct igmpv3_grec {
+       __be16  grec_nsrcs;
+       __be32  grec_mca;
+       __be32  grec_src[0];
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ struct igmpv3_report {
+       __u8 type;
+@@ -57,7 +57,7 @@ struct igmpv3_report {
+       __be16 resv2;
+       __be16 ngrec;
+       struct igmpv3_grec grec[0];
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ struct igmpv3_query {
+       __u8 type;
+@@ -78,7 +78,7 @@ struct igmpv3_query {
+       __u8 qqic;
+       __be16 nsrcs;
+       __be32 srcs[0];
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ #define IGMP_HOST_MEMBERSHIP_QUERY    0x11    /* From RFC1112 */
+ #define IGMP_HOST_MEMBERSHIP_REPORT   0x12    /* Ditto */
+--- a/net/core/flow_dissector.c
++++ b/net/core/flow_dissector.c
+@@ -152,7 +152,7 @@ ipv6:
+               nhoff += poff;
+               ports = skb_header_pointer(skb, nhoff, sizeof(_ports), &_ports);
+               if (ports)
+-                      flow->ports = *ports;
++                      flow->ports = net_hdr_word(ports);
+       }
+ 
+       flow->thoff = (u16) nhoff;
+--- a/include/uapi/linux/icmpv6.h
++++ b/include/uapi/linux/icmpv6.h
+@@ -76,7 +76,7 @@ struct icmp6hdr {
+ #define icmp6_addrconf_other  icmp6_dataun.u_nd_ra.other
+ #define icmp6_rt_lifetime     icmp6_dataun.u_nd_ra.rt_lifetime
+ #define icmp6_router_pref     icmp6_dataun.u_nd_ra.router_pref
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ #define ICMPV6_ROUTER_PREF_LOW                0x3
+--- a/include/net/ndisc.h
++++ b/include/net/ndisc.h
+@@ -76,7 +76,7 @@ struct ra_msg {
+         struct icmp6hdr               icmph;
+       __be32                  reachable_time;
+       __be32                  retrans_timer;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ struct rd_msg {
+       struct icmp6hdr icmph;
+@@ -148,10 +148,10 @@ static inline u32 ndisc_hashfn(const voi
+ {
+       const u32 *p32 = pkey;
+ 
+-      return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) +
+-              (p32[1] * hash_rnd[1]) +
+-              (p32[2] * hash_rnd[2]) +
+-              (p32[3] * hash_rnd[3]));
++      return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) +
++              (net_hdr_word(&p32[1]) * hash_rnd[1]) +
++              (net_hdr_word(&p32[2]) * hash_rnd[2]) +
++              (net_hdr_word(&p32[3]) * hash_rnd[3]));
+ }
+ 
+ static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey)
+@@ -168,8 +168,10 @@ static inline struct neighbour *__ipv6_n
+            n = rcu_dereference_bh(n->next)) {
+               u32 *n32 = (u32 *) n->primary_key;
+               if (n->dev == dev &&
+-                  ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
+-                   (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0)
++                  ((n32[0] ^ net_hdr_word(&p32[0])) |
++                       (n32[1] ^ net_hdr_word(&p32[1])) |
++                   (n32[2] ^ net_hdr_word(&p32[2])) |
++                       (n32[3] ^ net_hdr_word(&p32[3]))) == 0)
+                       return n;
+       }
+ 
+--- a/net/sched/cls_u32.c
++++ b/net/sched/cls_u32.c
+@@ -142,7 +142,7 @@ next_knode:
+                       data = skb_header_pointer(skb, toff, 4, &hdata);
+                       if (!data)
+                               goto out;
+-                      if ((*data ^ key->val) & key->mask) {
++                      if ((net_hdr_word(data) ^ key->val) & key->mask) {
+                               n = n->next;
+                               goto next_knode;
+                       }
+@@ -193,8 +193,8 @@ check_terminal:
+                                                 &hdata);
+                       if (!data)
+                               goto out;
+-                      sel = ht->divisor & u32_hash_fold(*data, &n->sel,
+-                                                        n->fshift);
++                      sel = ht->divisor & u32_hash_fold(net_hdr_word(data),
++                                                        &n->sel, n->fshift);
+               }
+               if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT)))
+                       goto next_ht;
+--- a/net/ipv6/ip6_offload.c
++++ b/net/ipv6/ip6_offload.c
+@@ -199,7 +199,7 @@ static struct sk_buff **ipv6_gro_receive
+                       continue;
+ 
+               iph2 = ipv6_hdr(p);
+-              first_word = *(__be32 *)iph ^ *(__be32 *)iph2 ;
++              first_word = net_hdr_word(iph) ^ net_hdr_word(iph2);
+ 
+               /* All fields must match except length and Traffic Class. */
+               if (nlen != skb_network_header_len(p) ||
+--- a/include/net/addrconf.h
++++ b/include/net/addrconf.h
+@@ -43,7 +43,7 @@ struct prefix_info {
+       __be32                  reserved2;
+ 
+       struct in6_addr         prefix;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ #include <linux/netdevice.h>
+--- a/include/net/inet_ecn.h
++++ b/include/net/inet_ecn.h
+@@ -115,13 +115,13 @@ static inline int IP6_ECN_set_ce(struct 
+ {
+       if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
+               return 0;
+-      *(__be32*)iph |= htonl(INET_ECN_CE << 20);
++      net_hdr_word(iph) |= htonl(INET_ECN_CE << 20);
+       return 1;
+ }
+ 
+ static inline void IP6_ECN_clear(struct ipv6hdr *iph)
+ {
+-      *(__be32*)iph &= ~htonl(INET_ECN_MASK << 20);
++      net_hdr_word(iph) &= ~htonl(INET_ECN_MASK << 20);
+ }
+ 
+ static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner)
+--- a/include/net/ipv6.h
++++ b/include/net/ipv6.h
+@@ -107,7 +107,7 @@ struct frag_hdr {
+       __u8    reserved;
+       __be16  frag_off;
+       __be32  identification;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ #define       IP6_MF  0x0001
+ 
+@@ -386,8 +386,8 @@ static inline void __ipv6_addr_set_half(
+       }
+ #endif
+ #endif
+-      addr[0] = wh;
+-      addr[1] = wl;
++      net_hdr_word(&addr[0]) = wh;
++      net_hdr_word(&addr[1]) = wl;
+ }
+ 
+ static inline void ipv6_addr_set(struct in6_addr *addr, 
+@@ -446,6 +446,8 @@ static inline bool ipv6_prefix_equal(con
+       const __be32 *a1 = addr1->s6_addr32;
+       const __be32 *a2 = addr2->s6_addr32;
+       unsigned int pdw, pbi;
++      /* Used for last <32-bit fraction of prefix */
++      u32 pbia1, pbia2;
+ 
+       /* check complete u32 in prefix */
+       pdw = prefixlen >> 5;
+@@ -454,7 +456,9 @@ static inline bool ipv6_prefix_equal(con
+ 
+       /* check incomplete u32 in prefix */
+       pbi = prefixlen & 0x1f;
+-      if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
++      pbia1 = net_hdr_word(&a1[pdw]);
++      pbia2 = net_hdr_word(&a2[pdw]);
++      if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi))))
+               return false;
+ 
+       return true;
+@@ -587,13 +591,13 @@ static inline void ipv6_addr_set_v4mappe
+  */
+ static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
+ {
+-      const __be32 *a1 = token1, *a2 = token2;
++      const struct in6_addr *a1 = token1, *a2 = token2;
+       int i;
+ 
+       addrlen >>= 2;
+ 
+       for (i = 0; i < addrlen; i++) {
+-              __be32 xb = a1[i] ^ a2[i];
++              __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i];
+               if (xb)
+                       return i * 32 + 31 - __fls(ntohl(xb));
+       }
+@@ -657,12 +661,13 @@ extern void ipv6_select_ident(struct fra
+ static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
+                               __be32 flowlabel)
+ {
+-      *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel;
++      net_hdr_word((__be32 *)hdr) =
++              htonl(0x60000000 | (tclass << 20)) | flowlabel;
+ }
+ 
+ static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr)
+ {
+-      return *(__be32 *)hdr & IPV6_FLOWINFO_MASK;
++      return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK;
+ }
+ 
+ /*
+--- a/include/net/secure_seq.h
++++ b/include/net/secure_seq.h
+@@ -2,6 +2,7 @@
+ #define _NET_SECURE_SEQ
+ 
+ #include <linux/types.h>
++#include <linux/in6.h>
+ 
+ extern void net_secret_init(void);
+ extern __u32 secure_ip_id(__be32 daddr);
+--- a/include/uapi/linux/in.h
++++ b/include/uapi/linux/in.h
+@@ -55,7 +55,7 @@ enum {
+ /* Internet address. */
+ struct in_addr {
+       __be32  s_addr;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ #define IP_TOS                1
+ #define IP_TTL                2
+--- a/net/core/secure_seq.c
++++ b/net/core/secure_seq.c
+@@ -41,10 +41,11 @@ __u32 secure_tcpv6_sequence_number(const
+       u32 secret[MD5_MESSAGE_BYTES / 4];
+       u32 hash[MD5_DIGEST_WORDS];
+       u32 i;
++      const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
+ 
+       memcpy(hash, saddr, 16);
+       for (i = 0; i < 4; i++)
+-              secret[i] = net_secret[i] + (__force u32)daddr[i];
++              secret[i] = net_secret[i] + (__force u32)daddr6->s6_addr32[i];
+       secret[4] = net_secret[4] +
+               (((__force u16)sport << 16) + (__force u16)dport);
+       for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
+@@ -62,10 +63,11 @@ u32 secure_ipv6_port_ephemeral(const __b
+       u32 secret[MD5_MESSAGE_BYTES / 4];
+       u32 hash[MD5_DIGEST_WORDS];
+       u32 i;
++      const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
+ 
+       memcpy(hash, saddr, 16);
+       for (i = 0; i < 4; i++)
+-              secret[i] = net_secret[i] + (__force u32) daddr[i];
++              secret[i] = net_secret[i] + (__force u32) daddr6->s6_addr32[i];
+       secret[4] = net_secret[4] + (__force u32)dport;
+       for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
+               secret[i] = net_secret[i];
+@@ -163,10 +165,11 @@ u64 secure_dccpv6_sequence_number(__be32
+       u32 hash[MD5_DIGEST_WORDS];
+       u64 seq;
+       u32 i;
++      const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
+ 
+       memcpy(hash, saddr, 16);
+       for (i = 0; i < 4; i++)
+-              secret[i] = net_secret[i] + daddr[i];
++              secret[i] = net_secret[i] +  daddr6->s6_addr32[i];
+       secret[4] = net_secret[4] +
+               (((__force u16)sport << 16) + (__force u16)dport);
+       for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
+--- a/net/ipv6/ip6_fib.c
++++ b/net/ipv6/ip6_fib.c
+@@ -144,7 +144,7 @@ static __inline__ __be32 addr_bit_set(co
+        * See include/asm-generic/bitops/le.h.
+        */
+       return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) &
+-             addr[fn_bit >> 5];
++             net_hdr_word(&addr[fn_bit >> 5]);
+ }
+ 
+ static __inline__ struct fib6_node * node_alloc(void)
+--- a/net/netfilter/nf_conntrack_proto_tcp.c
++++ b/net/netfilter/nf_conntrack_proto_tcp.c
+@@ -454,7 +454,7 @@ static void tcp_sack(const struct sk_buf
+ 
+       /* Fast path for timestamp-only option */
+       if (length == TCPOLEN_TSTAMP_ALIGNED
+-          && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
++          && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24)
+                                      | (TCPOPT_NOP << 16)
+                                      | (TCPOPT_TIMESTAMP << 8)
+                                      | TCPOLEN_TIMESTAMP))
+--- a/net/netfilter/xt_LOG.c
++++ b/net/netfilter/xt_LOG.c
+@@ -528,9 +528,9 @@ static void dump_ipv6_packet(struct sbuf
+       /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */
+       sb_add(m, "LEN=%Zu TC=%u HOPLIMIT=%u FLOWLBL=%u ",
+              ntohs(ih->payload_len) + sizeof(struct ipv6hdr),
+-             (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20,
++             (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20,
+              ih->hop_limit,
+-             (ntohl(*(__be32 *)ih) & 0x000fffff));
++             (ntohl(net_hdr_word(ih)) & 0x000fffff));
+ 
+       fragment = 0;
+       ptr = ip6hoff + sizeof(struct ipv6hdr);
+--- a/net/xfrm/xfrm_input.c
++++ b/net/xfrm/xfrm_input.c
+@@ -77,8 +77,8 @@ int xfrm_parse_spi(struct sk_buff *skb, 
+       if (!pskb_may_pull(skb, hlen))
+               return -EINVAL;
+ 
+-      *spi = *(__be32*)(skb_transport_header(skb) + offset);
+-      *seq = *(__be32*)(skb_transport_header(skb) + offset_seq);
++      *spi = net_hdr_word(skb_transport_header(skb) + offset);
++      *seq = net_hdr_word(skb_transport_header(skb) + offset_seq);
+       return 0;
+ }
+ 
+--- a/net/ipv4/ip_gre.c
++++ b/net/ipv4/ip_gre.c
+@@ -190,13 +190,13 @@ static int parse_gre_header(struct sk_bu
+       }
+ 
+       if (greh->flags & GRE_KEY) {
+-              tpi->key = *options;
++              tpi->key = net_hdr_word(options);
+               options++;
+       } else
+               tpi->key = 0;
+ 
+       if (unlikely(greh->flags & GRE_SEQ)) {
+-              tpi->seq = *options;
++              tpi->seq = net_hdr_word(options);
+               options++;
+       } else
+               tpi->seq = 0;
+--- a/net/ipv4/tcp_input.c
++++ b/net/ipv4/tcp_input.c
+@@ -3592,13 +3592,14 @@ static bool tcp_parse_aligned_timestamp(
+ {
+       const __be32 *ptr = (const __be32 *)(th + 1);
+ 
+-      if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
+-                        | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
++      if (net_hdr_word(ptr) ==
++          htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++                (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
+               tp->rx_opt.saw_tstamp = 1;
+               ++ptr;
+-              tp->rx_opt.rcv_tsval = ntohl(*ptr);
++              tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr);
+               ++ptr;
+-              tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
++              tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) - tp->tsoffset;
+               return true;
+       }
+       return false;

diff --git a/target/linux/ar71xx/patches-3.8/000-backport_ag71xx_phy_connect.patch b/target/linux/ar71xx/patches-3.8/000-backport_ag71xx_phy_connect.patch
new file mode 100644 (file)
index 0000000..ebc1442
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.8/000-backport_ag71xx_phy_connect.patch
@@ -0,0 +1,11 @@
+--- a/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
++++ b/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
+@@ -131,7 +131,7 @@ static int ag71xx_phy_connect_multi(stru
+       }
+ 
+       ag->phy_dev = phy_connect(dev, dev_name(&phydev->dev),
+-                                &ag71xx_phy_link_adjust,
++                                &ag71xx_phy_link_adjust, 0,
+                                 pdata->phy_if_mode);
+ 
+       if (IS_ERR(ag->phy_dev)) {