X-Git-Url: https://git.archive.openwrt.org/?p=openwrt.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FW306R_V20.dts;h=421dea046ca9a821fa043962d9e3925c5502acdb;hp=a28e705c8dd932865daab6afc29f431b4fd09778;hb=eef423040eff9c1d6ae56e4b73239e2653e33546;hpb=af6f122ebdc85469a44781f807b7a808190792aa

diff --git a/target/linux/ramips/dts/W306R_V20.dts b/target/linux/ramips/dts/W306R_V20.dts
index a28e705c8d..421dea046c 100644
--- a/target/linux/ramips/dts/W306R_V20.dts
+++ b/target/linux/ramips/dts/W306R_V20.dts
@@ -1,23 +1,14 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
 
 / {
 	compatible = "W306R_V20", "ralink,rt3052-soc";
 	model = "Tenda W306R V2.0";
 
-	memorydetect {
-		ralink,memory = <0x0 0x200000 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
-	};
-
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -47,33 +38,35 @@
 		};
 	};
 
-	palmbus@10000000 {
-		sysc@0 {
-			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-			ralink,uartmux = "gpio";
-			ralink,wdtmux = <1>;
-		};
-
-		gpio0: gpio@600 {
-			status = "okay";
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+				ralink,function = "gpio";
+			};
 		};
 	};
 
 	ethernet@10100000 {
-		status = "okay";
+		mtd-mac-address = <&factory 0x28>;
 	};
 
 	esw@10110000 {
-		status = "okay";
-		ralink,portmap = <0x3e>;
+		mediatek,portmap = <0x3e>;
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
 	};
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		sys {
 			label = "w306r-v20:green:sys";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wps {
 			label = "w306r-v20:green:wps";
 			gpios = <&gpio0 13 1>;
@@ -85,14 +78,11 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "RESET/WPS";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
 	};
-
-	wmac@10180000 {
-		status = "okay";
-	};
 };