ralink: fix mt7628 ehci support

[openwrt.git] / target / linux / ramips / patches-4.3 / 0029-phy-usb-add-ralink-phy.patch

diff --git a/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch
index cc61c29..30db4ab 100644 (file)
--- a/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch
+++ b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch
@@ -38,7 +38,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +};
 --- a/drivers/phy/Kconfig
 +++ b/drivers/phy/Kconfig
-@@ -331,6 +331,14 @@ config PHY_XGENE
+@@ -331,6 +331,14 @@
        help
          This option enables support for APM X-Gene SoC multi-purpose PHY.
  
@@ -55,14 +55,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
        depends on RESET_CONTROLLER
 --- a/drivers/phy/Makefile
 +++ b/drivers/phy/Makefile
-@@ -46,3 +46,4 @@ obj-$(CONFIG_PHY_QCOM_UFS)   += phy-qcom-
+@@ -46,3 +46,4 @@
  obj-$(CONFIG_PHY_TUSB1210)            += phy-tusb1210.o
  obj-$(CONFIG_PHY_BRCMSTB_SATA)                += phy-brcmstb-sata.o
  obj-$(CONFIG_PHY_PISTACHIO_USB)               += phy-pistachio-usb.o
 +obj-$(CONFIG_PHY_RALINK_USB)          += phy-ralink-usb.o
 --- /dev/null
 +++ b/drivers/phy/phy-ralink-usb.c
-@@ -0,0 +1,175 @@
+@@ -0,0 +1,228 @@
 +/*
 + * Allwinner ralink USB phy driver
 + *
@@ -99,6 +99,20 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#define RT_SYSC_REG_CLKCFG1           0x030
 +#define RT_SYSC_REG_USB_PHY_CFG               0x05c
 +
++#define OFS_U2_PHY_AC0                  0x00
++#define OFS_U2_PHY_AC1                  0x04
++#define OFS_U2_PHY_AC2                  0x08
++#define OFS_U2_PHY_ACR0                 0x10
++#define OFS_U2_PHY_ACR1                 0x14
++#define OFS_U2_PHY_ACR2                 0x18
++#define OFS_U2_PHY_ACR3                 0x1C
++#define OFS_U2_PHY_ACR4                 0x20
++#define OFS_U2_PHY_AMON0                0x24
++#define OFS_U2_PHY_DCR0                 0x60
++#define OFS_U2_PHY_DCR1                 0x64
++#define OFS_U2_PHY_DTM0                 0x68
++#define OFS_U2_PHY_DTM1                 0x6C
++
 +#define RT_RSTCTRL_UDEV                       BIT(25)
 +#define RT_RSTCTRL_UHST                       BIT(22)
 +#define RT_SYSCFG1_USB0_HOST_MODE     BIT(10)
@@ -116,8 +130,40 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +      struct reset_control    *rsthost;
 +      u32                     clk;
 +      struct phy              *phy;
++      void __iomem            *base;
 +};
 +
++static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg)
++{
++      iowrite32(val, phy->base + reg);
++}
++
++static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg)
++{
++      return ioread32(phy->base + reg);
++}
++
++static void
++u2_phy_init(struct ralink_usb_phy *phy)
++{
++      u2_phy_r32(phy, OFS_U2_PHY_AC2);
++      u2_phy_r32(phy, OFS_U2_PHY_ACR0);
++      u2_phy_r32(phy, OFS_U2_PHY_DCR0);
++
++      u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0);
++      u2_phy_r32(phy, OFS_U2_PHY_DCR0);
++      u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0);
++      u2_phy_r32(phy, OFS_U2_PHY_DCR0);
++      u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0);
++      u2_phy_r32(phy, OFS_U2_PHY_DCR0);
++      u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0);
++      u2_phy_r32(phy, OFS_U2_PHY_DCR0);
++      u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0);
++      u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1);
++      u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3);
++      u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0);
++}
++
 +static int ralink_usb_phy_power_on(struct phy *_phy)
 +{
 +      struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
@@ -139,6 +185,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +       */
 +      mdelay(10);
 +
++      if (!IS_ERR(phy->base))
++              u2_phy_init(phy);
++
 +      /* print some status info */
 +      t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
 +      dev_info(&phy->phy->dev, "remote usb device wakeup %s\n",
@@ -155,13 +204,13 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +{
 +      struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
 +
-+      /* disable the phy */
-+      rt_sysc_m32(phy->clk, 0, RT_SYSC_REG_CLKCFG1);
-+
 +      /* assert the reset lines */
 +      reset_control_assert(phy->rstdev);
 +      reset_control_assert(phy->rsthost);
 +
++      /* disable the phy */
++      rt_sysc_m32(phy->clk, 0, RT_SYSC_REG_CLKCFG1);
++
 +      return 0;
 +}
 +
@@ -187,6 +236,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 +static int ralink_usb_phy_probe(struct platform_device *pdev)
 +{
++      struct resource *res;
 +      struct device *dev = &pdev->dev;
 +      struct phy_provider *phy_provider;
 +      const struct of_device_id *match;
@@ -202,6 +252,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 +      phy->clk = (int) match->data;
 +
++      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++      phy->base = devm_ioremap_resource(&pdev->dev, res);
++
 +      phy->rsthost = devm_reset_control_get(&pdev->dev, "host");
 +      if (IS_ERR(phy->rsthost)) {
 +              dev_err(dev, "host reset is missing\n");