ramips: revert gpio regulator dts update

[openwrt.git] / target / linux / ramips / dts / FREESTATION5.dts

diff --git a/target/linux/ramips/dts/FREESTATION5.dts b/target/linux/ramips/dts/FREESTATION5.dts
index 043744e..a3cc8fc 100644 (file)
--- a/target/linux/ramips/dts/FREESTATION5.dts
+++ b/target/linux/ramips/dts/FREESTATION5.dts
@@ -3,15 +3,23 @@
 /include/ "rt3050.dtsi"
 
 / {
-       compatible = "FREESTATION5", "ralink,rt3052-soc";
+       compatible = "FREESTATION5", "ralink,rt3050-soc";
        model = "ARC FreeStation5";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
+       chosen {
+               bootargs = "console=ttyS0,115200";
        };
 
-       chosen {
-               bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
        };
 
        cfi@1f000000 {
@@ -22,6 +30,29 @@
                device-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x7b0000>;
+               };
        };
 
        ethernet@10100000 {
@@ -30,7 +61,7 @@
 
        esw@10110000 {
                status = "okay";
-               ralink,portmap = <0x3e>;
+               ralink,portmap = <0x01>;
        };
 
        wmac@10180000 {
@@ -40,4 +71,33 @@
        otg@101c0000 {
                status = "okay";
        };
+
+       gpio-export {
+               compatible = "gpio-export";
+               // Used to enable power-over-ethernet passthrough from port0 to port1.
+               // Disable passthrough by default to prevent accidental equipment damage.
+               poe {
+                       gpio-export,name = "poe-passthrough";
+                       gpio-export,output = <1>; // OUT_INIT_HIGH
+                       gpios = <&gpio0 11 1>;    // GPIO 11, ACTIVE_LOW
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               // The following leds are defined in the ArcOS firmware, but reportedly
+               // not present in the Freestation5 device.
+               wifi {
+                       label = "freestation:unknown:wifi";
+                       gpios = <&gpio0 7 1>;
+               };
+               powerg {
+                       label = "freestation:unknown:powerg";
+                       gpios = <&gpio0 9 1>;
+               };
+               usb {
+                       label = "freestation:unknown:usb";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
 };