ralink: dts fixes

[openwrt.git] / target / linux / ramips / dts / DIR-600-B1.dts

diff --git a/target/linux/ramips/dts/DIR-600-B1.dts b/target/linux/ramips/dts/DIR-600-B1.dts
index 519583b..aa9309f 100644 (file)
--- a/target/linux/ramips/dts/DIR-600-B1.dts
+++ b/target/linux/ramips/dts/DIR-600-B1.dts
@@ -3,28 +3,15 @@
 /include/ "rt3050.dtsi"
 
 / {
-       #address-cells = <1>;
-       #size-cells = <1>;
        compatible = "DIR-600-B1", "ralink,rt3050-soc";
        model = "D-Link DIR-600 B1";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
-       };
-
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+                               ralink,function = "gpio";
+                       };
                };
        };
 
@@ -36,14 +23,36 @@
                device-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "devdata";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "devconf";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x3b0000>;
+               };
        };
 
        ethernet@10100000 {
-               status = "okay";
+               mtd-mac-address = <&factory 0x4004>;
        };
 
        esw@10110000 {
-               status = "okay";
                ralink,portmap = <0x2f>;
        };
 
@@ -64,10 +73,6 @@
                };
        };
 
-       wmac@10180000 {
-               status = "okay";
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
                status {