ramips: move ESW reset to preinit on RT305x/RT5350

[openwrt.git] / target / linux / ramips / base-files / etc / uci-defaults / 02_network

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 5fb52bb..747a83d 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -13,7 +13,6 @@ ramips_setup_rt3x5x_vlans()
        fi
        local wanports=""
        local lanports=""
-       swconfig dev rt305x set reset 1
        for port in 5 4 3 2 1 0; do
                if [ `swconfig dev rt305x port $port get disable` = "1" ]; then
                        continue
@@ -38,14 +37,17 @@ ramips_setup_interfaces()
 
        case $board in
        3g300m | \
+       w150m | \
        all0256n | \
        all5002 | \
-       broadway)
+       all5003 | \
+       broadway | \
+       wnce2001)
                ucidef_add_switch "switch0" "1" "0"
                ucidef_set_interface_lan "eth0"
                ;;
 
-       dir-615-h1 | \
+       3g-6200nl | \
        wl-330n)
                ucidef_set_interface_lan "eth0.1"
                ;;
@@ -61,6 +63,12 @@ ramips_setup_interfaces()
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ;;
 
+       asl26555)
+               ucidef_set_interface_lan "eth0.1"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
+               ;;
+
        dir-645)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
@@ -68,6 +76,7 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "0 6t"
                ;;
 
+       dir-615-h1 | \
        mzk-w300nh2)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
@@ -77,6 +86,13 @@ ramips_setup_interfaces()
 
        f5d8235-v1 | \
        f5d8235-v2 | \
+       ur-326n4g)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
+               ucidef_add_switch_vlan "switch0" "2" "0 6t"
+               ;;
+
        ur-336un)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ;;
@@ -112,11 +128,11 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "0t 5"
                ;;
 
-       freestation5 | \
        wcr-150gn)
                ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
                ;;
 
+       d105 | \
        omni-emb-hpm|\
        wli-tx4-ag300n)
                ucidef_set_interface_lan "eth0"
@@ -147,12 +163,15 @@ ramips_setup_macs()
                ;;
        3g-6200n | \
        3g300m | \
+       w150m | \
        air3gii | \
        argus-atp52b | \
        bc2 | \
        br6425 | \
        broadway | \
+       dir-620-d1 | \
        f5d8235-v1 | \
+       mpr-a2 | \
        mzk-w300nh2 | \
        nw718 | \
        psr-680w | \
@@ -163,6 +182,10 @@ ramips_setup_macs()
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
 
+       asl26555)
+               lan_mac=$(mtd_get_mac_binary devdata 16388)
+               ;;
+
        w306r-v20)
                lan_mac=$(mtd_get_mac_binary factory 4)
                wan_mac=$(macaddr_add "$lan_mac" 5)
@@ -193,6 +216,7 @@ ramips_setup_macs()
                ;;
 
        esr-9753 | \
+       ur-326n4g | \
        ur-336un)
                lan_mac=$(mtd_get_mac_binary devdata 16388)
                wan_mac=$(macaddr_add "$lan_mac" 1)
@@ -230,7 +254,9 @@ ramips_setup_macs()
 
        all0239-3g | \
        carambola | \
-       w502u)
+       freestation5 | \
+       w502u | \
+       wnce2001)
                lan_mac=$(mtd_get_mac_binary factory 40)
                wan_mac=$(mtd_get_mac_binary factory 46)
                ;;
@@ -240,6 +266,7 @@ ramips_setup_macs()
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
 
+       d105 | \
        wli-tx4-ag300n)
                lan_mac=$(mtd_get_mac_binary factory 4)
                ;;