[lantiq] add devicetrees

[openwrt.git] / target / linux / lantiq / image / EASY80920.dtsi

diff --git a/target/linux/lantiq/image/EASY80920.dtsi b/target/linux/lantiq/image/EASY80920.dtsi
index 332df3d..660f3cf 100644 (file)
--- a/target/linux/lantiq/image/EASY80920.dtsi
+++ b/target/linux/lantiq/image/EASY80920.dtsi
@@ -23,25 +23,50 @@
                        
                };
 
-               sflash@E100800 {
-                       compatible = "lantiq,sflash";
+               spi@E100800 {
+                       compatible = "lantiq,spi-xway-broken";
                        reg = <0xE100800 0x100>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <22 23 24>;
                        #address-cells = <1>;
                        #size-cells = <1>;
-       
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x10000>;
-                       };
 
-                       partition@10000 {
-                               label = "uboot_env";
-                               reg = <0x10000 0x10000>;
-                       };
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "s25fl129p0";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l3205d";
+                               spi-max-frequency = <1000000>;
+
+                               partition@0 {
+                                       reg = <0x0 0x20000>;
+                                       label = "SPI (RO) U-Boot Image";
+                                       read-only;
+                               };
 
-                       partition@20000 {
-                               label = "linux";
-                               reg = <0x20000 0x1d0000>;
+                               partition@20000 {
+                                       reg = <0x20000 0x10000>;
+                                       label = "ENV_MAC";
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       reg = <0x30000 0x10000>;
+                                       label = "DPF";
+                                       read-only;
+                               };
+
+                               partition@40000 {
+                                       reg = <0x40000 0x10000>;
+                                       label = "NVRAM";
+                                       read-only;
+                               };
+
+                               partition@500000 {
+                                       reg = <0x50000 0x003a0000>;
+                                       label = "kernel";
+                               };
                        };
                };
 
@@ -58,14 +83,18 @@
                        reg = <0xE100B10 0xA0>;
 
                        state_default: pinmux {
+                               exin3 {
+                                       lantiq,groups = "exin3";
+                                       lantiq,function = "exin";
+                               };
                                stp {
                                        lantiq,groups = "stp";
                                        lantiq,function = "stp";
                                };
-                               /*spi {
+                               spi {
                                        lantiq,groups = "spi", "spi_cs4";
                                        lantiq,function = "spi";
-                               };*/
+                               };
                                nand {
                                        lantiq,groups = "nand cle", "nand ale",
                                                        "nand rd", "nand rdy";
@@ -79,18 +108,19 @@
                                        lantiq,groups = "gnt1", "req1";
                                        lantiq,function = "pci";
                                };
-                               exin {
-                                       lantiq,groups = "exin3";
-                                       lantiq,function = "exin";
-                               };
                                conf_out {
                                        lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
                                                        "io4", "io5", "io6", /* stp */
-                                                       "io17", "io18", /* spi dout & clk */
-                                                       "io21", /* pci-rst */
-                                                       "io38"; /* pcie-rst */
+                                                       "io21",
+                                                       "io33";
                                        lantiq,open-drain;
                                        lantiq,pull = <0>;
+                                       lantiq,output = <1>;
+                               };
+                               pcie-rst {
+                                       lantiq,pins = "io38";
+                                       lantiq,pull = <0>;
+                                       lantiq,output = <1>;
                                };
                                conf_in {
                                        lantiq,pins = "io39", /* exin3 */
@@ -100,7 +130,7 @@
                        };
                };
 
-               eth@0xE108000 {
+               eth@E108000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "lantiq,xrx200-net";
@@ -137,12 +167,6 @@
                                        phy-mode = "gmii";
                                        phy-handle = <&phy11>;
                                };
-                               ethernet@4 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <4>;
-                                       phynmode0 = "gmii";
-                                       phy-handle = <&phy13>;
-                               };
                        };
 
                        wan: interface@1 {
@@ -151,7 +175,7 @@
                                #size-cells = <0>;
                                reg = <1>;
                                mac-address = [ 00 11 22 33 44 56 ];
-
+                               lantiq,wan;
                                ethernet@5 {
                                        compatible = "lantiq,xrx200-pdi-port";
                                        reg = <5>;
@@ -160,6 +184,20 @@
                                };
                        };
 
+                       test: interface@2 {
+                               compatible = "lantiq,xrx200-pdi";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               reg = <2>;
+                               mac-address = [ 00 11 22 33 44 57 ];
+                               ethernet@4 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <4>;
+                                       phynmode0 = "gmii";
+                                       phy-handle = <&phy13>;
+                               };
+                       };
+
                        mdio@0 {
                                #address-cells = <1>;
                                #size-cells = <0>;
@@ -205,7 +243,12 @@
                        lantiq,phy2 = <0x7>;
                        /* lantiq,rising; */
                };
-               
+
+               ifxhcd@E101000 {
+                       status = "okay";
+                       gpios = <&gpio 33 0>;
+               };      
+
                pci@E105400 {
                        #address-cells = <3>;
                        #size-cells = <2>;
@@ -229,12 +272,6 @@
                };
        };
 
-       ifxhcd {
-               compatible = "lantiq,ifxhcd";
-               interrupt-parent = <&icu0>;
-               interrupts = <62 91>;
-       };
-
        gphy-xrx200 {
                compatible = "lantiq,phy-xrx200";
                firmware = "lantiq/vr9_phy11g_a2x.bin";
@@ -248,7 +285,7 @@
                poll-interval = <100>;
                reset {
                        label = "Reset";
-                       gpios = <&gpio 7 0>;
+                       gpios = <&gpio 7 1>;
                        linux,code = <0x100>;
                };
                paging {
@@ -261,7 +298,7 @@
 /*     gpio-keys {
                compatible = "gpio-keys";
                wps {
-                       gpios = <&gpio 39 0>;
+                       gpios = <&gpio 2 0>;
                        linux,code = <0x100>;
                };
        };*/
@@ -269,50 +306,42 @@
        gpio-leds {
                compatible = "gpio-leds";
                
-               led0 {
-                       label = "led0";
+               power {
+                       label = "power";
                        gpios = <&stp 9 0>;
                        default-state = "on";
                };
                warning {
                        label = "warning";
                        gpios = <&stp 22 0>;
-                       default-state = "on";
                };
                fxs1 {
                        label = "fxs1";
                        gpios = <&stp 21 0>;
-                       default-state = "on";
                };
                fxs2 {
                        label = "fxs2";
                        gpios = <&stp 20 0>;
-                       default-state = "on";
                };
                fxo {
                        label = "fxo";
                        gpios = <&stp 19 0>;
-                       default-state = "on";
                };
                usb1 {
                        label = "usb1";
                        gpios = <&stp 18 0>;
-                       default-state = "on";
                };
                usb2 {
                        label = "usb2";
                        gpios = <&stp 15 0>;
-                       default-state = "on";
                };
                sd {
                        label = "sd";
                        gpios = <&stp 14 0>;
-                       default-state = "on";
                };
                wps {
                        label = "wps";
                        gpios = <&stp 12 0>;
-                       default-state = "on";
                };
        };
 };