imx6: use upstream gateworks board names

[openwrt.git] / target / linux / imx6 / config-3.10

diff --git a/target/linux/imx6/config-3.10 b/target/linux/imx6/config-3.10
index 0df9fab..e73c80c 100644 (file)
--- a/target/linux/imx6/config-3.10
+++ b/target/linux/imx6/config-3.10
@@ -1,3 +1,4 @@
+CONFIG_AHCI_IMX=y
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_ARCH_BCM is not set
 CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
@@ -26,6 +27,7 @@ CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 # CONFIG_ARCH_WM8850 is not set
 CONFIG_ARM=y
 # CONFIG_ARM_APPENDED_DTB is not set
+# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
 # CONFIG_ARM_CPU_SUSPEND is not set
 CONFIG_ARM_ERRATA_754322=y
 CONFIG_ARM_ERRATA_764369=y
@@ -33,6 +35,7 @@ CONFIG_ARM_ERRATA_775420=y
 # CONFIG_ARM_EXYNOS4210_CPUFREQ is not set
 # CONFIG_ARM_EXYNOS4X12_CPUFREQ is not set
 # CONFIG_ARM_EXYNOS5250_CPUFREQ is not set
+# CONFIG_ARM_EXYNOS5440_CPUFREQ is not set
 CONFIG_ARM_GIC=y
 CONFIG_ARM_IMX6Q_CPUFREQ=y
 # CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
@@ -44,7 +47,9 @@ CONFIG_ARM_PATCH_PHYS_VIRT=y
 CONFIG_ARM_THUMB=y
 # CONFIG_ARM_THUMBEE is not set
 CONFIG_ARM_VIRT_EXT=y
+CONFIG_ATA=y
 CONFIG_ATAGS=y
+# CONFIG_ATA_SFF is not set
 CONFIG_AUTO_ZRELADDR=y
 # CONFIG_CACHE_L2X0 is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -68,13 +73,14 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_HAS_ASID=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
@@ -122,6 +128,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CPUFREQ_CPU0=y
 CONFIG_GENERIC_IDLE_POLL_SETUP=y
 CONFIG_GENERIC_IO=y
 CONFIG_GENERIC_IRQ_CHIP=y
@@ -186,6 +193,7 @@ CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_HAVE_UID16=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
 # CONFIG_IMX2_WDT is not set
 # CONFIG_IMX_DMA is not set
@@ -274,7 +282,7 @@ CONFIG_PINCTRL_IMX=y
 CONFIG_PINCTRL_IMX6Q=y
 # CONFIG_PINCTRL_SINGLE is not set
 CONFIG_PINMUX=y
-# CONFIG_PM_OPP is not set
+CONFIG_PM_OPP=y
 CONFIG_PPS=y
 # CONFIG_PREEMPT_RCU is not set
 CONFIG_PROC_DEVICETREE=y
@@ -293,6 +301,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_ANATOP=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_PFUZE100=y
 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_RFKILL_REGULATOR is not set
@@ -301,8 +310,9 @@ CONFIG_RPS=y
 # CONFIG_SAMSUNG_USB2PHY is not set
 # CONFIG_SAMSUNG_USB3PHY is not set
 # CONFIG_SAMSUNG_USBPHY is not set
+CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SMP=y