KERNEL_LOADADDR = 0x80060000
-DEVICE_VARS += NETGEAR_KERNEL_MAGIC NETGEAR_BOARD_ID NETGEAR_HW_ID CMDLINE CONSOLE IMAGE_SIZE BOARDNAME LOADER_FLASH_OFFS
+DEVICE_VARS += NETGEAR_KERNEL_MAGIC NETGEAR_BOARD_ID NETGEAR_HW_ID CMDLINE CONSOLE IMAGE_SIZE BOARDNAME LOADER_FLASH_OFFS LOADER_TYPE
define Build/netgear-squashfs
rm -rf $@.fs $@.squashfs
@mv $@.new $@
endef
+define Build/tplink-safeloader
+ -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
+ -B $(TPLINK_BOARD_NAME) \
+ -V $(REVISION) \
+ -k $(word 1,$^) \
+ -r $@ \
+ -o $@.new \
+ $2 \
+ -j \
+ $(if $(findstring sysupgrade,$1),-S) && mv $@.new $@ || rm -f $@
+endef
+
define Build/loader-common
rm -rf $@.src
$(MAKE) -C lzma-loader \
PKG_BUILD_DIR="$@.src" \
TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \
- KERNEL_CMDLINE="$(CMDLINE)" BOARD="$(BOARDNAME)" \
+ BOARD="$(BOARDNAME)" \
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
- $(1) compile loader.gz
- mv "$@.gz" "$@"
+ $(1) compile loader.$(LOADER_TYPE)
+ mv "$@.$(LOADER_TYPE)" "$@"
rm -rf $@.src
endef
define Build/loader-okli-compile
- $(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0)
+ $(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0 KERNEL_CMDLINE="$(CMDLINE)")
endef
define Build/loader-kernel
$(call Build/loader-common,LOADER_DATA="$@")
endef
+define Build/loader-kernel-cmdline
+ $(call Build/loader-common,LOADER_DATA="$@" KERNEL_CMDLINE="$(CMDLINE)")
+endef
+
define Build/loader-okli
dd if=$(KDIR)/loader-$(1).gz bs=7680 conv=sync of="$@.new"
cat "$@" >> "$@.new"
cat "$(1)" > "$@"
endef
-DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION
+DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION TPLINK_BOARD_NAME
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
define Device/tplink
TPLINK_HWREV := 0x1
TPLINK_HEADER_VERSION := 1
+ LOADER_TYPE := gz
KERNEL := kernel-bin | patch-cmdline | lzma
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | mktplinkfw-initramfs
IMAGES := sysupgrade.bin factory.bin
COMPILE := loader-$(1).gz
COMPILE/loader-$(1).gz := loader-okli-compile
KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1)
- KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel | mktplinkfw-initramfs
+ KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel-cmdline | mktplinkfw-initramfs
endef
define Device/tplink-4m
IMAGE_SIZE := 15872k
endef
+define Device/cpe210-220-510-520
+ MTDPARTS := spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
+ IMAGE_SIZE := 7680k
+ BOARDNAME := CPE510
+ TPLINK_BOARD_NAME := CPE510
+ LOADER_TYPE := elf
+ KERNEL := kernel-bin | patch-cmdline | lzma | loader-kernel
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+endef
+TARGET_DEVICES += cpe210-220-510-520
+
define Device/tl-wdr4300-v1
$(Device/tplink-8mlzma)
BOARDNAME = TL-WDR4300
endef
TARGET_DEVICES += minibox-v1
+define Device/omy-x1
+ $(Device/tplink-8mlzma)
+ BOARDNAME := OMY-X1
+ DEVICE_PROFILE := OMYX1
+ TPLINK_HWID := 0x06660201
+endef
+TARGET_DEVICES += omy-x1
+
define Device/onion-omega
$(Device/tplink-16mlzma)
BOARDNAME := ONION-OMEGA
endef
#
-# Embed patched lzma-compressed kernel inside lzma-loader.
-#
-# Specifying the command line via the lzma-loader doesn't work with some
-# models (like the TP-LINK CPE series), so this version first patches the
-# command line in the image and then builds the loader around it.
-#
-# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
-# $(2), suffix of target file to build, e.g. bin, gz, elf
-# $(3), kernel command line to pass from lzma-loader to kernel
-# $(4), unused here
-# $(5), suffix of kernel filename, e.g. -initramfs, or empty
-define Image/BuildLoaderPatched
- $(call PatchKernelLzma,$(1),$(3))
- -rm -rf $(KDIR)/lzma-loader
- $(LOADER_MAKE) LOADER=loader-$(1).$(2) \
- LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
- LOADER_DATA="$(KDIR_TMP)/vmlinux-$(1)$(5).bin.lzma" BOARD="$(1)" \
- compile loader.$(2)
- -$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)
-endef
-
-#
# Build lzma-loader alone which will search for lzma-compressed kernel identified by
# uImage header with magic "OKLI" at boot time.
#
cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware)
-cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
$(call sysupname,$(1),$(2))
endef
-Image/Build/TPLINK-SAFELOADER/loader = $(call Image/BuildLoaderPatched,$(1),elf,$(2) $(3))
-
-define Image/Build/TPLINK-SAFELOADER
- [ -e "$(KDIR)/loader-$(2).elf" ]
-
- -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
- -B $(5) \
- -k $(KDIR)/loader-$(2).elf \
- -r $(KDIR)/root.$(1) \
- -V $(REVISION) \
- -j \
- -o $(call factoryname,$(1),$(2))
- -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
- -B $(5) \
- -k $(KDIR)/loader-$(2).elf \
- -r $(KDIR)/root.$(1) \
- -V $(REVISION) \
- -j -S \
- -o $(call sysupname,$(1),$(2))
-endef
-
-
define Image/Build/CyberTAN
echo -n '' > $(KDIR_TMP)/empty.bin
$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout)))
-$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
-
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN))
projects / openwrt.git / blobdiff