ar71xx: adjust ew-dorin platform for LAN+WAN setup

[openwrt.git] / target / linux / ar71xx / base-files / etc / uci-defaults / 02_network

diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index bdf37ee..9a1a285 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -22,15 +22,15 @@ ubnt-unifi-outdoor)
        ucidef_set_interface_lan "eth0 eth1"
        ;;
 
-ap132)
+ap132 |\
+wlr8100)
        ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" "1" "1"
        ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
        ucidef_add_switch_vlan "switch0" "2" "0t 1"
        ;;
 
-ap136-010 |\
-wlr8100)
+ap136-010)
        ucidef_set_interfaces_lan_wan "eth0" "eth1"
        ucidef_add_switch "switch0" "1" "1"
        ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
@@ -38,14 +38,16 @@ wlr8100)
        ;;
 
 ap136-020 |\
-ap135-020)
+ap135-020 |\
+tl-wr1043nd-v2)
        ucidef_set_interfaces_lan_wan "eth1" "eth0"
        ucidef_add_switch "switch0" "1" "1"
        ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
        ucidef_add_switch_vlan "switch0" "2" "5 6"
        ;;
 
-archer-c7)
+archer-c7 |\
+tl-wdr4900-v2)
        ucidef_set_interfaces_lan_wan "eth1" "eth0"
        ucidef_add_switch "switch0" "1" "1"
        ucidef_add_switch_vlan "switch0" "1" "0 2 3 4 5"
@@ -169,6 +171,7 @@ tl-wr941nd)
 
 tl-mr3420-v2 |\
 tl-wr841n-v8 |\
+tl-wr842n-v2 |\
 wnr2000-v3 |\
 wnr2200 |\
 wnr612-v2)
@@ -205,12 +208,26 @@ dir-825-c1)
        [ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
        ;;
 
+mynet-n750)
+       local mac
+       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+       ucidef_add_switch "switch0" "1" "1"
+       ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
+       ucidef_add_switch_vlan "switch0" "2" "0t 5"
+       mac=$(mtd_get_mac_ascii devdata "wanmac")
+       [ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
+       ;;
+
 dir-835-a1 |\
 wndr4300)
        ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" "1" "1"
        ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
        ucidef_add_switch_vlan "switch0" "2" "0t 5"
+       mac_lan=$(mtd_get_mac_binary caldata 0)
+       [ -n "$mac_lan" ] && ucidef_set_interface_macaddr "lan" "$mac_lan"
+       mac_wan=$(mtd_get_mac_binary caldata 6)
+       [ -n "$mac_wan" ] && ucidef_set_interface_macaddr "wan" "$mac_wan"
        ;;
 
 all0305 |\
@@ -227,8 +244,12 @@ tl-mr13u |\
 tl-mr3020 |\
 tl-mr3040 |\
 tl-mr3040-v2 |\
+tl-wa750re |\
+tl-wa850re |\
+tl-wa801nd-v2 |\
 tl-wa901nd |\
 tl-wa901nd-v2 |\
+tl-wa901nd-v3 |\
 tl-wr703n |\
 wndap360 |\
 mynet-rext |\
@@ -290,9 +311,10 @@ wzr-hp-g450h)
        ;;
 
 ew-dorin)
-       ucidef_set_interface_lan "eth0"
+       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" "1" "1"
-       ucidef_add_switch_vlan "switch0" "1" "0 1 2 3"
+       ucidef_add_switch_vlan "switch0" "1" "0t 1 2"
+       ucidef_add_switch_vlan "switch0" "2" "0t 3"
        ;;
 
 ew-dorin-router)
@@ -301,6 +323,46 @@ ew-dorin-router)
        ucidef_add_switch_vlan "switch0" "1" "0 2 3"
        ;;
 
+wndr3700)
+       ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+       ucidef_add_switch "switch0" "1" "1"
+       ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+       # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+       uci set network.@switch[-1].blinkrate='2'
+
+       ucidef_add_switch_port "switch0" "1"
+       # Port 1 controls the GREEN configuration of LEDs for
+       # the switch and the section does not correspond to a real
+       # switch port.
+       #
+       # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+       # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+       # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+       # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+       # 14: Link (master); 15: separate register
+       uci set network.@switch_port[-1].led='6'
+
+       ucidef_add_switch_port "switch0" "2"
+       # Port 2 controls the ORANGE configuration of LEDs for
+       # the switch and the section does not correspond to a real
+       # switch port.
+       #
+       # See the key above for switch port 1 for the meaning of the
+       # 'led' setting below.
+       uci set network.@switch_port[-1].led='9'
+
+       ucidef_add_switch_port "switch0" "5"
+       # Port 5 controls the configuration of the WAN LED and the
+       # section does not correspond to a real switch port.
+       #
+       # To toggle the use of green or orange LEDs for the WAN port,
+       # see the LED setting for wndr3700:green:wan in /etc/config/system.
+       #
+       # See the key above for switch port 1 for the meaning of the
+       # 'led' setting below.
+       uci set network.@switch_port[-1].led='2'
+       ;;
+
 *)
        ucidef_set_interfaces_lan_wan "eth0" "eth1"
        ;;