+commit 8d804f1af11e4e058b1e8453327777d73a585cb8
+Author: Felix Fietkau <nbd@openwrt.org>
+Date: Sun Mar 9 11:25:43 2014 +0100
+
+ ath9k: clean up and enhance ANI debugfs file
+
+ Unify scnprintf calls and include the current OFDM/CCK immunity level.
+
+ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+commit 22e298b5a3a8a49e33805d4e351965123dede35b
+Author: Felix Fietkau <nbd@openwrt.org>
+Date: Sun Mar 9 10:58:47 2014 +0100
+
+ ath9k: fix ready time of the multicast buffer queue
+
+ qi->tqi_readyTime is written directly to registers that expect
+ microseconds as unit instead of TU.
+ When setting the CABQ ready time, cur_conf->beacon_interval is in TU, so
+ convert it to microseconds before passing it to ath9k_hw.
+
+ This should hopefully fix some Tx DMA issues with buffered multicast
+ frames in AP mode.
+
+ Cc: stable@vger.kernel.org
+ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+commit fcb064fdd5a27bec8d24099bc0172468f34c97cb
+Author: Felix Fietkau <nbd@openwrt.org>
+Date: Sun Mar 9 09:43:09 2014 +0100
+
+ ath9k_hw: fix unreachable code in baseband hang detection code
+
+ The commit "ath9k: reduce baseband hang detection false positive rate"
+ added a delay in the loop checking the baseband state, however it was
+ unreachable due to previous 'continue' statements.
+
+ Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
+ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+commit 31959d8df39319e32c6d5ba9c135727be90cfad7
+Author: Michal Kazior <michal.kazior@tieto.com>
+Date: Fri Mar 7 08:09:38 2014 +0100
+
+ mac80211: fix possible NULL dereference
+
+ If chanctx is missing on a given vif then the band
+ is assumed to be 2GHz. However if hw doesn't
+ support 2GHz band then mac80211 ended up with a
+ NULL dereference.
+
+ This fixes a splat:
+
+ [ 4605.207223] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
+ [ 4605.210789] IP: [<ffffffffa07b5635>] ieee80211_parse_bitrates+0x65/0x110 [mac80211]
+
+ The splat was preceeded by WARN_ON(!chanctx_conf)
+ in ieee80211_get_sdata_band().
+
+ Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
+
+commit 6c5a3ffa0a2d22c091a2717f427259bacf77ac5e
+Author: Michael Braun <michael-dev@fami-braun.de>
+Date: Thu Mar 6 15:08:43 2014 +0100
+
+ mac80211: fix WPA with VLAN on AP side with ps-sta again
+
+ commit de74a1d9032f4d37ea453ad2a647e1aff4cd2591
+ "mac80211: fix WPA with VLAN on AP side with ps-sta"
+ fixed an issue where queued multicast packets would
+ be sent out encrypted with the key of an other bss.
+
+ commit "7cbf9d017dbb5e3276de7d527925d42d4c11e732"
+ "mac80211: fix oops on mesh PS broadcast forwarding"
+ essentially reverted it, because vif.type cannot be AP_VLAN
+ due to the check to vif.type in ieee80211_get_buffered_bc before.
+
+ As the later commit intended to fix the MESH case, fix it
+ by checking for IFTYPE_AP instead of IFTYPE_AP_VLAN.
+
+ Fixes: 7cbf9d017dbb
+ Cc: <stable@vger.kernel.org> # 3.10.x
+ Cc: <stable@vger.kernel.org> # 3.11.x
+ Cc: <stable@vger.kernel.org> # 3.12.x
+ Cc: <stable@vger.kernel.org> # 3.13.x
+ Cc: <linux-wireless@vger.kernel.org>
+ Cc: <projekt-wlan@fem.tu-ilmenau.de>
+ Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
+
+commit 9d6ab9bdb9b368a6cf9519f0f92509b5b2c297ec
+Author: Johannes Berg <johannes.berg@intel.com>
+Date: Mon Mar 3 14:19:08 2014 +0100
+
+ cfg80211: remove racy beacon_interval assignment
+
+ In case of AP mode, the beacon interval is already reset to
+ zero inside cfg80211_stop_ap(), and in the other modes it
+ isn't relevant. Remove the assignment to remove a potential
+ race since the assignment isn't properly locked.
+
+ Reported-by: Michal Kazior <michal.kazior@tieto.com>
+ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+
+commit 1abdeca3c6fb9cf1f84f85e78ed8d1c33bd69db0
+Author: Felix Fietkau <nbd@openwrt.org>
+Date: Fri Feb 28 18:52:56 2014 +0100
+
+ ath9k_hw: tweak noise immunity thresholds for older chipsets
+
+ Older chipsets are more sensitive to high PHY error counts, and the
+ current noise immunity thresholds were based on tests run at QCA with
+ newer chipsets.
+
+ This patch brings back the values from the old ANI implementation for
+ old chipsets, and it also disables weak signal detection on an earlier
+ noise immunity level, to improve overall radio stability on affected
+ devices.
+
+ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+commit 431e506da5953adc3b65af25f4b90873d528c115
+Author: Felix Fietkau <nbd@openwrt.org>
+Date: Fri Feb 28 18:44:13 2014 +0100
+
+ ath9k_hw: toggle weak signal detection in AP mode on older chipsets
+
+ The commit 80b4205b "ath9k: Fix OFDM weak signal detection for AP mode"
+ prevented weak signal detection changes from taking effect in AP mode on
+ all chipsets, claiming it is "not allowed".
+
+ The main reason for not disabling weak signal detection in AP mode is
+ that typically beacon RSSI is used to track whether it is needed to
+ boost range, and this is unavailable in AP mode for obvious reasons.
+
+ The problem with not disabling weak signal detection is that older
+ chipsets are very sensitive to high PHY error counts. When faced with
+ heavy noise, this can lead to an excessive amount of "Failed to stop
+ TX DMA" errors in the field.
+
+ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+commit 98d1a6c5b14688ed030e81b889f607be308e0df9
+Author: Felix Fietkau <nbd@openwrt.org>
+Date: Mon Feb 24 22:20:32 2014 +0100
+
+ ath9k: fix invalid descriptor discarding
+
+ Only set sc->rx.discard_next to rx_stats->rs_more when actually
+ discarding the current descriptor.
+
+ Also, fix a detection of broken descriptors:
+ First the code checks if the current descriptor is not done.
+ Then it checks if the next descriptor is done.
+ Add a check that afterwards checks the first descriptor again, because
+ it might have been completed in the mean time.
+
+ This fixes a regression introduced in
+ commit 723e711356b5a8a95728a890e254e8b0d47b55cf
+ "ath9k: fix handling of broken descriptors"
+
+ Cc: stable@vger.kernel.org
+ Reported-by: Marco André Dinis <marcoandredinis@gmail.com>
+ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+commit 52a46300e782fe6994466523eb2b0b59091ea59f
+Author: Felix Fietkau <nbd@openwrt.org>
+Date: Mon Feb 24 11:43:50 2014 +0100
+
+ ath9k: reduce baseband hang detection false positive rate
+
+ Check if the baseband state remains stable, and add a small delay
+ between register reads.
+
+ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+commit 118945bb12082e9d4edddc868d88143164e0f440
+Author: Felix Fietkau <nbd@openwrt.org>
+Date: Sat Feb 22 14:55:23 2014 +0100
+
+ ath5k: set SURVEY_INFO_IN_USE on get_survey
+
+ Only one channel is returned - the one currently being used.
+
+ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+commit ee41f72476e1ea44283dfe1cbf75b9543a1e15c8
+Author: Felix Fietkau <nbd@openwrt.org>
+Date: Sat Feb 22 14:44:52 2014 +0100
+
+ ath9k: make some hardware reset log messages debug-only
+
+ On some chips, baseband watchdog hangs are more common than others, and
+ the driver has support for handling them.
+ Interrupts even after a watchdog hang are also quite common, so there's
+ not much point in spamming the user's logfiles.
+
+ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+commit b14fbb554fc65a2e0b5c41a319269b0350f187e7
+Author: Felix Fietkau <nbd@openwrt.org>
+Date: Sat Feb 22 14:35:25 2014 +0100
+
+ ath9k: do not set half/quarter channel flags in AR_PHY_MODE
+
+ 5/10 MHz channel bandwidth is configured via the PLL clock, instead of
+ the AR_PHY_MODE register. Using that register is AR93xx specific, and
+ makes the mode incompatible with earlier chipsets.
+
+ In some early versions, these flags were apparently applied at the wrong
+ point in time and thus did not cause connectivity issues, however now
+ they are causing problems, as pointed out in this OpenWrt ticket:
+
+ https://dev.openwrt.org/ticket/14916
+
+ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+commit 0f1cb7be2551b30b02cd54c897e0e29e483cfda5
+Author: Felix Fietkau <nbd@openwrt.org>
+Date: Sat Feb 22 13:43:29 2014 +0100
+
+ ath9k: fix ps-poll responses under a-mpdu sessions
+
+ When passing tx frames to the U-APSD queue for powersave poll responses,
+ the ath_atx_tid pointer needs to be passed to ath_tx_setup_buffer for
+ proper sequence number accounting.
+
+ This fixes high latency and connection stability issues with ath9k
+ running as AP and a few kinds of mobile phones as client, when PS-Poll
+ is heavily used
+
+ Cc: stable@vger.kernel.org
+ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+commit d5d87a37bbd6066b2c3c5d0bd0fe2a6e2ea45cc5
+Author: Felix Fietkau <nbd@openwrt.org>
+Date: Fri Feb 21 11:39:59 2014 +0100
+
+ ath9k: list more reset causes in debugfs
+
+ Number of MAC hangs and stuck beacons were missing
+
+ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+commit d84856012e0f10fe598a5ad3b7b869397a089e07
+Author: Johannes Berg <johannes.berg@intel.com>
+Date: Thu Feb 20 11:19:58 2014 +0100
+
+ mac80211: fix station wakeup powersave race
+
+ Consider the following (relatively unlikely) scenario:
+ 1) station goes to sleep while frames are buffered in driver
+ 2) driver blocks wakeup (until no more frames are buffered)
+ 3) station wakes up again
+ 4) driver unblocks wakeup
+
+ In this case, the current mac80211 code will do the following:
+ 1) WLAN_STA_PS_STA set
+ 2) WLAN_STA_PS_DRIVER set
+ 3) - nothing -
+ 4) WLAN_STA_PS_DRIVER cleared
+
+ As a result, no frames will be delivered to the client, even
+ though it is awake, until it sends another frame to us that
+ triggers ieee80211_sta_ps_deliver_wakeup() in sta_ps_end().
+
+ Since we now take the PS spinlock, we can fix this while at
+ the same time removing the complexity with the pending skb
+ queue function. This was broken since my commit 50a9432daeec
+ ("mac80211: fix powersaving clients races") due to removing
+ the clearing of WLAN_STA_PS_STA in the RX path.
+
+ While at it, fix a cleanup path issue when a station is
+ removed while the driver is still blocking its wakeup.
+
+ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+
+commit 798f2786602cbe93e6b928299614aa36ebf50692
+Author: Johannes Berg <johannes.berg@intel.com>
+Date: Mon Feb 17 20:49:03 2014 +0100
+
+ mac80211: insert stations before adding to driver
+
+ There's a race condition in mac80211 because we add stations
+ to the internal lists after adding them to the driver, which
+ means that (for example) the following can happen:
+ 1. a station connects and is added
+ 2. first, it is added to the driver
+ 3. then, it is added to the mac80211 lists
+
+ If the station goes to sleep between steps 2 and 3, and the
+ firmware/hardware records it as being asleep, mac80211 will
+ never instruct the driver to wake it up again as it never
+ realized it went to sleep since the RX path discarded the
+ frame as a "spurious class 3 frame", no station entry was
+ present yet.
+
+ Fix this by adding the station in software first, and only
+ then adding it to the driver. That way, any state that the
+ driver changes will be reflected properly in mac80211's
+ station state. The problematic part is the roll-back if the
+ driver fails to add the station, in that case a bit more is
+ needed. To not make that overly complex prevent starting BA
+ sessions in the meantime.
+
+ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+
+commit b9ba6a520cb07ab3aa7aaaf9ce4a0bc7a6bc06fe
+Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
+Date: Thu Feb 20 09:22:11 2014 +0200
+
+ mac80211: fix AP powersave TX vs. wakeup race
+
+ There is a race between the TX path and the STA wakeup: while
+ a station is sleeping, mac80211 buffers frames until it wakes
+ up, then the frames are transmitted. However, the RX and TX
+ path are concurrent, so the packet indicating wakeup can be
+ processed while a packet is being transmitted.
+
+ This can lead to a situation where the buffered frames list
+ is emptied on the one side, while a frame is being added on
+ the other side, as the station is still seen as sleeping in
+ the TX path.
+
+ As a result, the newly added frame will not be send anytime
+ soon. It might be sent much later (and out of order) when the
+ station goes to sleep and wakes up the next time.
+
+ Additionally, it can lead to the crash below.
+
+ Fix all this by synchronising both paths with a new lock.
+ Both path are not fastpath since they handle PS situations.
+
+ In a later patch we'll remove the extra skb queue locks to
+ reduce locking overhead.
+
+ BUG: unable to handle kernel
+ NULL pointer dereference at 000000b0
+ IP: [<ff6f1791>] ieee80211_report_used_skb+0x11/0x3e0 [mac80211]
+ *pde = 00000000
+ Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
+ EIP: 0060:[<ff6f1791>] EFLAGS: 00210282 CPU: 1
+ EIP is at ieee80211_report_used_skb+0x11/0x3e0 [mac80211]
+ EAX: e5900da0 EBX: 00000000 ECX: 00000001 EDX: 00000000
+ ESI: e41d00c0 EDI: e5900da0 EBP: ebe458e4 ESP: ebe458b0
+ DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
+ CR0: 8005003b CR2: 000000b0 CR3: 25a78000 CR4: 000407d0
+ DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
+ DR6: ffff0ff0 DR7: 00000400
+ Process iperf (pid: 3934, ti=ebe44000 task=e757c0b0 task.ti=ebe44000)
+ iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command LQ_CMD (#4e), seq: 0x0903, 92 bytes at 3[3]:9
+ Stack:
+ e403b32c ebe458c4 00200002 00200286 e403b338 ebe458cc c10960bb e5900da0
+ ff76a6ec ebe458d8 00000000 e41d00c0 e5900da0 ebe458f0 ff6f1b75 e403b210
+ ebe4598c ff723dc1 00000000 ff76a6ec e597c978 e403b758 00000002 00000002
+ Call Trace:
+ [<ff6f1b75>] ieee80211_free_txskb+0x15/0x20 [mac80211]
+ [<ff723dc1>] invoke_tx_handlers+0x1661/0x1780 [mac80211]
+ [<ff7248a5>] ieee80211_tx+0x75/0x100 [mac80211]
+ [<ff7249bf>] ieee80211_xmit+0x8f/0xc0 [mac80211]
+ [<ff72550e>] ieee80211_subif_start_xmit+0x4fe/0xe20 [mac80211]
+ [<c149ef70>] dev_hard_start_xmit+0x450/0x950
+ [<c14b9aa9>] sch_direct_xmit+0xa9/0x250
+ [<c14b9c9b>] __qdisc_run+0x4b/0x150
+ [<c149f732>] dev_queue_xmit+0x2c2/0xca0
+
+ Cc: stable@vger.kernel.org
+ Reported-by: Yaara Rozenblum <yaara.rozenblum@intel.com>
+ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
+ Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
+ [reword commit log, use a separate lock]
+ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+
+commit 80e419de0dff38436b30d363311c625766193f86
+Author: Inbal Hacohen <Inbal.Hacohen@intel.com>
+Date: Wed Feb 12 09:32:27 2014 +0200
+
+ cfg80211: bugfix in regulatory user hint process
+
+ After processing hint_user, we would want to schedule the
+ timeout work only if we are actually waiting to CRDA. This happens
+ when the status is not "IGNORE" nor "ALREADY_SET".
+
+ Signed-off-by: Inbal Hacohen <Inbal.Hacohen@intel.com>
+ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+
+commit 6514c93afede55284e2cb63359aadedb85884c80
+Author: Jouni Malinen <jouni@qca.qualcomm.com>
+Date: Tue Feb 18 20:41:08 2014 +0200
+
+ ath9k: Enable U-APSD AP mode support
+
+ mac80211 handles the actual operations, so ath9k can just indicate
+ support for this. Based on initial tests, this combination seems to
+ work fine.
+
+ Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
+
+commit a63caf0a357ad5c1f08d6b7827dc76c451445017
+Author: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed Feb 19 13:15:17 2014 +0100
+
+ ath9k: protect tid->sched check
+
+ We check tid->sched without a lock taken on ath_tx_aggr_sleep(). That
+ is race condition which can result of doing list_del(&tid->list) twice
+ (second time with poisoned list node) and cause crash like shown below:
+
+ [424271.637220] BUG: unable to handle kernel paging request at 00100104
+ [424271.637328] IP: [<f90fc072>] ath_tx_aggr_sleep+0x62/0xe0 [ath9k]
+ ...
+ [424271.639953] Call Trace:
+ [424271.639998] [<f90f6900>] ? ath9k_get_survey+0x110/0x110 [ath9k]
+ [424271.640083] [<f90f6942>] ath9k_sta_notify+0x42/0x50 [ath9k]
+ [424271.640177] [<f809cfef>] sta_ps_start+0x8f/0x1c0 [mac80211]
+ [424271.640258] [<c10f730e>] ? free_compound_page+0x2e/0x40
+ [424271.640346] [<f809e915>] ieee80211_rx_handlers+0x9d5/0x2340 [mac80211]
+ [424271.640437] [<c112f048>] ? kmem_cache_free+0x1d8/0x1f0
+ [424271.640510] [<c1345a84>] ? kfree_skbmem+0x34/0x90
+ [424271.640578] [<c10fc23c>] ? put_page+0x2c/0x40
+ [424271.640640] [<c1345a84>] ? kfree_skbmem+0x34/0x90
+ [424271.640706] [<c1345a84>] ? kfree_skbmem+0x34/0x90
+ [424271.640787] [<f809dde3>] ? ieee80211_rx_handlers_result+0x73/0x1d0 [mac80211]
+ [424271.640897] [<f80a07a0>] ieee80211_prepare_and_rx_handle+0x520/0xad0 [mac80211]
+ [424271.641009] [<f809e22d>] ? ieee80211_rx_handlers+0x2ed/0x2340 [mac80211]
+ [424271.641104] [<c13846ce>] ? ip_output+0x7e/0xd0
+ [424271.641182] [<f80a1057>] ieee80211_rx+0x307/0x7c0 [mac80211]
+ [424271.641266] [<f90fa6ee>] ath_rx_tasklet+0x88e/0xf70 [ath9k]
+ [424271.641358] [<f80a0f2c>] ? ieee80211_rx+0x1dc/0x7c0 [mac80211]
+ [424271.641445] [<f90f82db>] ath9k_tasklet+0xcb/0x130 [ath9k]
+
+ Bug report:
+ https://bugzilla.kernel.org/show_bug.cgi?id=70551
+
+ Reported-and-tested-by: Max Sydorenko <maxim.stargazer@gmail.com>
+ Cc: stable@vger.kernel.org
+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+
+commit 82ed9e3ccc02797df2ffe4b78127c4cd5f799a41
+Author: Felix Fietkau <nbd@openwrt.org>
+Date: Tue Feb 11 15:54:13 2014 +0100
+
+ mac80211: send control port protocol frames to the VO queue
+
+ Improves reliability of wifi connections with WPA, since authentication
+ frames are prioritized over normal traffic and also typically exempt
+ from aggregation.
+
+ Cc: stable@vger.kernel.org
+ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+commit d4426800f71e972feaa33e04c5801fc730627bdd
+Author: Stanislaw Gruszka <stf_xl@wp.pl>
+Date: Mon Feb 10 22:38:28 2014 +0100
+
+ rtl8187: fix regression on MIPS without coherent DMA
+
+ This patch fixes regression caused by commit a16dad77634 "MIPS: Fix
+ potencial corruption". That commit fixes one corruption scenario in
+ cost of adding another one, which actually start to cause crashes
+ on Yeeloong laptop when rtl8187 driver is used.
+
+ For correct DMA read operation on machines without DMA coherence, kernel
+ have to invalidate cache, such it will refill later with new data that
+ device wrote to memory, when that data is needed to process. We can only
+ invalidate full cache line. Hence when cache line includes both dma
+ buffer and some other data (written in cache, but not yet in main
+ memory), the other data can not hit memory due to invalidation. That
+ happen on rtl8187 where struct rtl8187_priv fields are located just
+ before and after small buffers that are passed to USB layer and DMA
+ is performed on them.
+
+ To fix the problem we align buffers and reserve space after them to make
+ them match cache line.
+
+ This patch does not resolve all possible MIPS problems entirely, for
+ that we have to assure that we always map cache aligned buffers for DMA,
+ what can be complex or even not possible. But patch fixes visible and
+ reproducible regression and seems other possible corruptions do not
+ happen in practice, since Yeeloong laptop works stable without rtl8187
+ driver.
+
+ Bug report:
+ https://bugzilla.kernel.org/show_bug.cgi?id=54391
+
+ Reported-by: Petr Pisar <petr.pisar@atlas.cz>
+ Bisected-by: Tom Li <biergaizi2009@gmail.com>
+ Reported-and-tested-by: Tom Li <biergaizi2009@gmail.com>
+ Cc: stable@vger.kernel.org
+ Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
+
+commit e2f141d67ad1e7fe10aaab61811e8a409dfb2442
+Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+Date: Fri Feb 7 10:29:55 2014 +0530
+
+ ath9k: Calculate IQ-CAL median
+
+ This patch adds a routine to calculate the median IQ correction
+ values for AR955x, which is used for outlier detection.
+ The normal method which is used for all other chips is
+ bypassed for AR955x.
+
+ Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+
+commit c52a6fce0820c8d0687443ab86058ae03b478c8f
+Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+Date: Fri Feb 7 10:29:54 2014 +0530
+
+ ath9k: Expand the IQ coefficient array
+
+ This will be used for storing data for mutiple
+ IQ calibration runs, for AR955x.
+
+ Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+
+commit 034969ff5c2b6431d10e07c1938f0b916da85cc3
+Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+Date: Fri Feb 7 10:29:53 2014 +0530
+
+ ath9k: Modify IQ calibration for AR955x
+
+ IQ calibration post-processing for AR955x is different
+ from other chips - instead of just doing it as part
+ of AGC calibration once, it is triggered 3 times and
+ a median is determined. This patch adds initial support
+ for changing the calibration behavior for AR955x.
+
+ Also, to simplify things, a helper routine to issue/poll
+ AGC calibration is used.
+
+ For non-AR955x chips, the iqcal_idx (which will be used
+ in subsequent patches) is set to zero.
+
+ Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+
+commit 9b1ed6454e6f3511f24266be99b4e403f243f6a8
+Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+Date: Fri Feb 7 10:29:52 2014 +0530
+
+ ath9k: Fix magnitude/phase calculation
+
+ Incorrect values are programmed in the registers
+ containing the IQ correction coefficients by the IQ-CAL
+ post-processing code. Fix this.
+
+ Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+
+commit 36f93484f96f79171dcecb67c5ef0c3de22531a6
+Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+Date: Fri Feb 7 10:29:51 2014 +0530
+
+ ath9k: Rename ar9003_hw_tx_iqcal_load_avg_2_passes
+
+ Use ar9003_hw_tx_iq_cal_outlier_detection instead.
+
+ Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+
+commit 3af09a7f5d21dd5fd15b973ce6a91a575da30417
+Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+Date: Fri Feb 7 10:29:50 2014 +0530
+
+ ath9k: Check explicitly for IQ calibration
+
+ In chips like AR955x, the initvals contain the information
+ whether IQ calibration is to be done in the HW when an
+ AGC calibration is triggered. Check if IQ-CAL is enabled
+ in the initvals before flagging 'txiqcal_done' as true.
+
+ Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+
+commit cb4969634b93c4643a32cc3fbd27d2b288b25771
+Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+Date: Fri Feb 7 10:29:49 2014 +0530
+
+ ath9k: Fix IQ cal post processing for SoC
+
+ Calibration data is not reused for SoC chips, so
+ call ar9003_hw_tx_iq_cal_post_proc() with the correct
+ argument. The 'is_reusable' flag is currently used
+ only for PC-OEM chips, but it makes things clearer to
+ specify it explicity.
+
+ Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+
+commit e138e0ef9560c46ce93dbb22a728a57888e94d1c
+Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+Date: Mon Feb 3 13:31:37 2014 +0530
+
+ ath9k: Fix TX power calculation
+
+ The commit, "ath9k_hw: Fix incorrect Tx control power in AR9003 template"
+ fixed the incorrect values in the eeprom templates, but if
+ boards have already been calibrated with incorrect values,
+ they would still be using the wrong TX power. Fix this by assigning
+ a default value in such cases.
+
+ Cc: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+ Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+
commit b9f268b5b01331c3c82179abca551429450e9417
Author: Michal Kazior <michal.kazior@tieto.com>
Date: Wed Jan 29 14:22:27 2014 +0100
else
udelay(100);
-@@ -2051,9 +2051,8 @@ static bool ath9k_hw_set_power_awake(str
+@@ -1534,7 +1534,7 @@ EXPORT_SYMBOL(ath9k_hw_check_nav);
+ bool ath9k_hw_check_alive(struct ath_hw *ah)
+ {
+ int count = 50;
+- u32 reg;
++ u32 reg, last_val;
+
+ if (AR_SREV_9300(ah))
+ return !ath9k_hw_detect_mac_hang(ah);
+@@ -1542,9 +1542,14 @@ bool ath9k_hw_check_alive(struct ath_hw
+ if (AR_SREV_9285_12_OR_LATER(ah))
+ return true;
+
++ last_val = REG_READ(ah, AR_OBS_BUS_1);
+ do {
+ reg = REG_READ(ah, AR_OBS_BUS_1);
++ if (reg != last_val)
++ return true;
+
++ udelay(1);
++ last_val = reg;
+ if ((reg & 0x7E7FFFEF) == 0x00702400)
+ continue;
+
+@@ -2051,9 +2056,8 @@ static bool ath9k_hw_set_power_awake(str
REG_SET_BIT(ah, AR_RTC_FORCE_WAKE,
AR_RTC_FORCE_WAKE_EN);
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
+@@ -451,7 +451,7 @@ void ath9k_tasklet(unsigned long data)
+ * interrupts are enabled in the reset routine.
+ */
+ atomic_inc(&ah->intr_ref_cnt);
+- ath_dbg(common, ANY, "FATAL: Skipping interrupts\n");
++ ath_dbg(common, RESET, "FATAL: Skipping interrupts\n");
+ goto out;
+ }
+
+@@ -471,7 +471,7 @@ void ath9k_tasklet(unsigned long data)
+ * interrupts are enabled in the reset routine.
+ */
+ atomic_inc(&ah->intr_ref_cnt);
+- ath_dbg(common, ANY,
++ ath_dbg(common, RESET,
+ "BB_WATCHDOG: Skipping interrupts\n");
+ goto out;
+ }
+@@ -484,7 +484,7 @@ void ath9k_tasklet(unsigned long data)
+ type = RESET_TYPE_TX_GTT;
+ ath9k_queue_reset(sc, type);
+ atomic_inc(&ah->intr_ref_cnt);
+- ath_dbg(common, ANY,
++ ath_dbg(common, RESET,
+ "GTT: Skipping interrupts\n");
+ goto out;
+ }
@@ -1866,7 +1866,7 @@ static void ath9k_set_coverage_class(str
static bool ath9k_has_tx_pending(struct ath_softc *sc)
__sta_info_flush(sdata, true);
ieee80211_free_keys(sdata, true);
-@@ -2638,6 +2643,24 @@ static int ieee80211_start_roc_work(stru
+@@ -1988,6 +1993,9 @@ static int ieee80211_change_bss(struct w
+
+ band = ieee80211_get_sdata_band(sdata);
+
++ if (WARN_ON(!wiphy->bands[band]))
++ return -EINVAL;
++
+ if (params->use_cts_prot >= 0) {
+ sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot;
+ changed |= BSS_CHANGED_ERP_CTS_PROT;
+@@ -2638,6 +2646,24 @@ static int ieee80211_start_roc_work(stru
INIT_DELAYED_WORK(&roc->work, ieee80211_sw_roc_work);
INIT_LIST_HEAD(&roc->dependents);
/* if there's one pending or we're scanning, queue this one */
if (!list_empty(&local->roc_list) ||
local->scanning || local->radar_detect_enabled)
-@@ -2772,24 +2795,6 @@ static int ieee80211_start_roc_work(stru
+@@ -2772,24 +2798,6 @@ static int ieee80211_start_roc_work(stru
if (!queued)
list_add_tail(&roc->list, &local->roc_list);
return 0;
}
-@@ -3004,8 +3009,10 @@ void ieee80211_csa_finalize_work(struct
+@@ -3004,8 +3012,10 @@ void ieee80211_csa_finalize_work(struct
if (!ieee80211_sdata_running(sdata))
goto unlock;
err = ieee80211_vif_change_channel(sdata, &changed);
mutex_unlock(&local->mtx);
if (WARN_ON(err < 0))
-@@ -3022,13 +3029,13 @@ void ieee80211_csa_finalize_work(struct
+@@ -3022,13 +3032,13 @@ void ieee80211_csa_finalize_work(struct
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP:
err = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon);
ieee80211_bss_info_change_notify(sdata, err);
break;
case NL80211_IFTYPE_ADHOC:
-@@ -3066,7 +3073,7 @@ int ieee80211_channel_switch(struct wiph
+@@ -3066,7 +3076,7 @@ int ieee80211_channel_switch(struct wiph
struct ieee80211_if_mesh __maybe_unused *ifmsh;
int err, num_chanctx;
return -1; /* not a robust management frame */
mmie = (struct ieee80211_mmie *)
-@@ -1311,18 +1311,15 @@ ieee80211_rx_h_sta_process(struct ieee80
+@@ -1128,6 +1128,13 @@ static void sta_ps_end(struct sta_info *
+ sta->sta.addr, sta->sta.aid);
+
+ if (test_sta_flag(sta, WLAN_STA_PS_DRIVER)) {
++ /*
++ * Clear the flag only if the other one is still set
++ * so that the TX path won't start TX'ing new frames
++ * directly ... In the case that the driver flag isn't
++ * set ieee80211_sta_ps_deliver_wakeup() will clear it.
++ */
++ clear_sta_flag(sta, WLAN_STA_PS_STA);
+ ps_dbg(sta->sdata, "STA %pM aid %d driver-ps-blocked\n",
+ sta->sta.addr, sta->sta.aid);
+ return;
+@@ -1311,18 +1318,15 @@ ieee80211_rx_h_sta_process(struct ieee80
!ieee80211_has_morefrags(hdr->frame_control) &&
!(status->rx_flags & IEEE80211_RX_DEFERRED_RELEASE) &&
(rx->sdata->vif.type == NL80211_IFTYPE_AP ||
sta_ps_end(sta);
} else {
if (ieee80211_has_pm(hdr->frame_control))
-@@ -1845,8 +1842,7 @@ static int ieee80211_drop_unencrypted_mg
+@@ -1845,8 +1849,7 @@ static int ieee80211_drop_unencrypted_mg
* having configured keys.
*/
if (unlikely(ieee80211_is_action(fc) && !rx->key &&
return 0;
return 1;
-@@ -525,9 +524,7 @@ ieee80211_tx_h_ps_buf(struct ieee80211_t
+@@ -478,6 +477,20 @@ ieee80211_tx_h_unicast_ps_buf(struct iee
+ sta->sta.addr, sta->sta.aid, ac);
+ if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER)
+ purge_old_ps_buffers(tx->local);
++
++ /* sync with ieee80211_sta_ps_deliver_wakeup */
++ spin_lock(&sta->ps_lock);
++ /*
++ * STA woke up the meantime and all the frames on ps_tx_buf have
++ * been queued to pending queue. No reordering can happen, go
++ * ahead and Tx the packet.
++ */
++ if (!test_sta_flag(sta, WLAN_STA_PS_STA) &&
++ !test_sta_flag(sta, WLAN_STA_PS_DRIVER)) {
++ spin_unlock(&sta->ps_lock);
++ return TX_CONTINUE;
++ }
++
+ if (skb_queue_len(&sta->ps_tx_buf[ac]) >= STA_MAX_TX_BUFFER) {
+ struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf[ac]);
+ ps_dbg(tx->sdata,
+@@ -492,6 +505,7 @@ ieee80211_tx_h_unicast_ps_buf(struct iee
+ info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
+ info->flags &= ~IEEE80211_TX_TEMPORARY_FLAGS;
+ skb_queue_tail(&sta->ps_tx_buf[ac], tx->skb);
++ spin_unlock(&sta->ps_lock);
+
+ if (!timer_pending(&local->sta_cleanup))
+ mod_timer(&local->sta_cleanup,
+@@ -525,9 +539,7 @@ ieee80211_tx_h_ps_buf(struct ieee80211_t
/* only deauth, disassoc and action are bufferable MMPDUs */
if (ieee80211_is_mgmt(hdr->frame_control) &&
if (tx->flags & IEEE80211_TX_UNICAST)
info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER;
return TX_CONTINUE;
-@@ -567,7 +564,7 @@ ieee80211_tx_h_select_key(struct ieee802
+@@ -567,7 +579,7 @@ ieee80211_tx_h_select_key(struct ieee802
tx->key = key;
else if (ieee80211_is_mgmt(hdr->frame_control) &&
is_multicast_ether_addr(hdr->addr1) &&
(key = rcu_dereference(tx->sdata->default_mgmt_key)))
tx->key = key;
else if (is_multicast_ether_addr(hdr->addr1) &&
-@@ -582,12 +579,12 @@ ieee80211_tx_h_select_key(struct ieee802
+@@ -582,12 +594,12 @@ ieee80211_tx_h_select_key(struct ieee802
tx->key = NULL;
else if (tx->skb->protocol == tx->sdata->control_port_protocol)
tx->key = NULL;
tx->key = NULL;
else {
I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted);
-@@ -878,7 +875,7 @@ static int ieee80211_fragment(struct iee
+@@ -878,7 +890,7 @@ static int ieee80211_fragment(struct iee
}
/* adjust first fragment's length */
return 0;
}
+@@ -2900,7 +2912,7 @@ ieee80211_get_buffered_bc(struct ieee802
+ cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+ }
+
+- if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
++ if (sdata->vif.type == NL80211_IFTYPE_AP)
+ sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
+ if (!ieee80211_tx_prepare(sdata, &tx, skb))
+ break;
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -499,7 +499,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee
/*
* There are major locking problems in nl80211/mac80211 for CSA,
* disable for all drivers until this has been reworked.
-@@ -875,8 +875,11 @@ static int cfg80211_netdev_notifier_call
+@@ -795,8 +795,6 @@ void cfg80211_leave(struct cfg80211_regi
+ default:
+ break;
+ }
+-
+- wdev->beacon_interval = 0;
+ }
+
+ static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
+@@ -875,8 +873,11 @@ static int cfg80211_netdev_notifier_call
break;
case NETDEV_DOWN:
cfg80211_update_iface_num(rdev, wdev->iftype, -1);
return;
switch (event) {
+--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
++++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+@@ -5065,6 +5065,10 @@ static u16 ar9003_hw_get_max_edge_power(
+ break;
+ }
+ }
++
++ if (is2GHz && !twiceMaxEdgePower)
++ twiceMaxEdgePower = 60;
++
+ return twiceMaxEdgePower;
+ }
+
+--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
++++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+@@ -23,10 +23,11 @@
+ #define MAX_MEASUREMENT MAX_IQCAL_MEASUREMENT
+ #define MAX_MAG_DELTA 11
+ #define MAX_PHS_DELTA 10
++#define MAXIQCAL 3
+
+ struct coeff {
+- int mag_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT];
+- int phs_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT];
++ int mag_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT][MAXIQCAL];
++ int phs_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT][MAXIQCAL];
+ int iqc_coeff[2];
+ };
+
+@@ -800,7 +801,7 @@ static bool ar9003_hw_calc_iq_corr(struc
+ if (q_q_coff > 63)
+ q_q_coff = 63;
+
+- iqc_coeff[0] = (q_q_coff * 128) + q_i_coff;
++ iqc_coeff[0] = (q_q_coff * 128) + (0x7f & q_i_coff);
+
+ ath_dbg(common, CALIBRATE, "tx chain %d: iq corr coeff=%x\n",
+ chain_idx, iqc_coeff[0]);
+@@ -831,7 +832,7 @@ static bool ar9003_hw_calc_iq_corr(struc
+ if (q_q_coff > 63)
+ q_q_coff = 63;
+
+- iqc_coeff[1] = (q_q_coff * 128) + q_i_coff;
++ iqc_coeff[1] = (q_q_coff * 128) + (0x7f & q_i_coff);
+
+ ath_dbg(common, CALIBRATE, "rx chain %d: iq corr coeff=%x\n",
+ chain_idx, iqc_coeff[1]);
+@@ -839,7 +840,8 @@ static bool ar9003_hw_calc_iq_corr(struc
+ return true;
+ }
+
+-static void ar9003_hw_detect_outlier(int *mp_coeff, int nmeasurement,
++static void ar9003_hw_detect_outlier(int mp_coeff[][MAXIQCAL],
++ int nmeasurement,
+ int max_delta)
+ {
+ int mp_max = -64, max_idx = 0;
+@@ -848,20 +850,20 @@ static void ar9003_hw_detect_outlier(int
+
+ /* find min/max mismatch across all calibrated gains */
+ for (i = 0; i < nmeasurement; i++) {
+- if (mp_coeff[i] > mp_max) {
+- mp_max = mp_coeff[i];
++ if (mp_coeff[i][0] > mp_max) {
++ mp_max = mp_coeff[i][0];
+ max_idx = i;
+- } else if (mp_coeff[i] < mp_min) {
+- mp_min = mp_coeff[i];
++ } else if (mp_coeff[i][0] < mp_min) {
++ mp_min = mp_coeff[i][0];
+ min_idx = i;
+ }
+ }
+
+ /* find average (exclude max abs value) */
+ for (i = 0; i < nmeasurement; i++) {
+- if ((abs(mp_coeff[i]) < abs(mp_max)) ||
+- (abs(mp_coeff[i]) < abs(mp_min))) {
+- mp_avg += mp_coeff[i];
++ if ((abs(mp_coeff[i][0]) < abs(mp_max)) ||
++ (abs(mp_coeff[i][0]) < abs(mp_min))) {
++ mp_avg += mp_coeff[i][0];
+ mp_count++;
+ }
+ }
+@@ -873,7 +875,7 @@ static void ar9003_hw_detect_outlier(int
+ if (mp_count)
+ mp_avg /= mp_count;
+ else
+- mp_avg = mp_coeff[nmeasurement - 1];
++ mp_avg = mp_coeff[nmeasurement - 1][0];
+
+ /* detect outlier */
+ if (abs(mp_max - mp_min) > max_delta) {
+@@ -882,15 +884,16 @@ static void ar9003_hw_detect_outlier(int
+ else
+ outlier_idx = min_idx;
+
+- mp_coeff[outlier_idx] = mp_avg;
++ mp_coeff[outlier_idx][0] = mp_avg;
+ }
+ }
+
+-static void ar9003_hw_tx_iqcal_load_avg_2_passes(struct ath_hw *ah,
+- struct coeff *coeff,
+- bool is_reusable)
++static void ar9003_hw_tx_iq_cal_outlier_detection(struct ath_hw *ah,
++ struct coeff *coeff,
++ bool is_reusable)
+ {
+ int i, im, nmeasurement;
++ int magnitude, phase;
+ u32 tx_corr_coeff[MAX_MEASUREMENT][AR9300_MAX_CHAINS];
+ struct ath9k_hw_cal_data *caldata = ah->caldata;
+
+@@ -920,21 +923,30 @@ static void ar9003_hw_tx_iqcal_load_avg_
+ if (nmeasurement > MAX_MEASUREMENT)
+ nmeasurement = MAX_MEASUREMENT;
+
+- /* detect outlier only if nmeasurement > 1 */
+- if (nmeasurement > 1) {
+- /* Detect magnitude outlier */
+- ar9003_hw_detect_outlier(coeff->mag_coeff[i],
+- nmeasurement, MAX_MAG_DELTA);
+-
+- /* Detect phase outlier */
+- ar9003_hw_detect_outlier(coeff->phs_coeff[i],
+- nmeasurement, MAX_PHS_DELTA);
++ /*
++ * Skip normal outlier detection for AR9550.
++ */
++ if (!AR_SREV_9550(ah)) {
++ /* detect outlier only if nmeasurement > 1 */
++ if (nmeasurement > 1) {
++ /* Detect magnitude outlier */
++ ar9003_hw_detect_outlier(coeff->mag_coeff[i],
++ nmeasurement,
++ MAX_MAG_DELTA);
++
++ /* Detect phase outlier */
++ ar9003_hw_detect_outlier(coeff->phs_coeff[i],
++ nmeasurement,
++ MAX_PHS_DELTA);
++ }
+ }
+
+ for (im = 0; im < nmeasurement; im++) {
++ magnitude = coeff->mag_coeff[i][im][0];
++ phase = coeff->phs_coeff[i][im][0];
+
+- coeff->iqc_coeff[0] = (coeff->mag_coeff[i][im] & 0x7f) |
+- ((coeff->phs_coeff[i][im] & 0x7f) << 7);
++ coeff->iqc_coeff[0] =
++ (phase & 0x7f) | ((magnitude & 0x7f) << 7);
+
+ if ((im % 2) == 0)
+ REG_RMW_FIELD(ah, tx_corr_coeff[im][i],
+@@ -991,7 +1003,63 @@ static bool ar9003_hw_tx_iq_cal_run(stru
+ return true;
+ }
+
+-static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah, bool is_reusable)
++static void __ar955x_tx_iq_cal_sort(struct ath_hw *ah,
++ struct coeff *coeff,
++ int i, int nmeasurement)
++{
++ struct ath_common *common = ath9k_hw_common(ah);
++ int im, ix, iy, temp;
++
++ for (im = 0; im < nmeasurement; im++) {
++ for (ix = 0; ix < MAXIQCAL - 1; ix++) {
++ for (iy = ix + 1; iy <= MAXIQCAL - 1; iy++) {
++ if (coeff->mag_coeff[i][im][iy] <
++ coeff->mag_coeff[i][im][ix]) {
++ temp = coeff->mag_coeff[i][im][ix];
++ coeff->mag_coeff[i][im][ix] =
++ coeff->mag_coeff[i][im][iy];
++ coeff->mag_coeff[i][im][iy] = temp;
++ }
++ if (coeff->phs_coeff[i][im][iy] <
++ coeff->phs_coeff[i][im][ix]) {
++ temp = coeff->phs_coeff[i][im][ix];
++ coeff->phs_coeff[i][im][ix] =
++ coeff->phs_coeff[i][im][iy];
++ coeff->phs_coeff[i][im][iy] = temp;
++ }
++ }
++ }
++ coeff->mag_coeff[i][im][0] = coeff->mag_coeff[i][im][MAXIQCAL / 2];
++ coeff->phs_coeff[i][im][0] = coeff->phs_coeff[i][im][MAXIQCAL / 2];
++
++ ath_dbg(common, CALIBRATE,
++ "IQCAL: Median [ch%d][gain%d]: mag = %d phase = %d\n",
++ i, im,
++ coeff->mag_coeff[i][im][0],
++ coeff->phs_coeff[i][im][0]);
++ }
++}
++
++static bool ar955x_tx_iq_cal_median(struct ath_hw *ah,
++ struct coeff *coeff,
++ int iqcal_idx,
++ int nmeasurement)
++{
++ int i;
++
++ if ((iqcal_idx + 1) != MAXIQCAL)
++ return false;
++
++ for (i = 0; i < AR9300_MAX_CHAINS; i++) {
++ __ar955x_tx_iq_cal_sort(ah, coeff, i, nmeasurement);
++ }
++
++ return true;
++}
++
++static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah,
++ int iqcal_idx,
++ bool is_reusable)
+ {
+ struct ath_common *common = ath9k_hw_common(ah);
+ const u32 txiqcal_status[AR9300_MAX_CHAINS] = {
+@@ -1004,10 +1072,11 @@ static void ar9003_hw_tx_iq_cal_post_pro
+ AR_PHY_CHAN_INFO_TAB_1,
+ AR_PHY_CHAN_INFO_TAB_2,
+ };
+- struct coeff coeff;
++ static struct coeff coeff;
+ s32 iq_res[6];
+ int i, im, j;
+- int nmeasurement;
++ int nmeasurement = 0;
++ bool outlier_detect = true;
+
+ for (i = 0; i < AR9300_MAX_CHAINS; i++) {
+ if (!(ah->txchainmask & (1 << i)))
+@@ -1065,17 +1134,23 @@ static void ar9003_hw_tx_iq_cal_post_pro
+ goto tx_iqcal_fail;
+ }
+
+- coeff.mag_coeff[i][im] = coeff.iqc_coeff[0] & 0x7f;
+- coeff.phs_coeff[i][im] =
++ coeff.phs_coeff[i][im][iqcal_idx] =
++ coeff.iqc_coeff[0] & 0x7f;
++ coeff.mag_coeff[i][im][iqcal_idx] =
+ (coeff.iqc_coeff[0] >> 7) & 0x7f;
+
+- if (coeff.mag_coeff[i][im] > 63)
+- coeff.mag_coeff[i][im] -= 128;
+- if (coeff.phs_coeff[i][im] > 63)
+- coeff.phs_coeff[i][im] -= 128;
++ if (coeff.mag_coeff[i][im][iqcal_idx] > 63)
++ coeff.mag_coeff[i][im][iqcal_idx] -= 128;
++ if (coeff.phs_coeff[i][im][iqcal_idx] > 63)
++ coeff.phs_coeff[i][im][iqcal_idx] -= 128;
+ }
+ }
+- ar9003_hw_tx_iqcal_load_avg_2_passes(ah, &coeff, is_reusable);
++
++ if (AR_SREV_9550(ah))
++ outlier_detect = ar955x_tx_iq_cal_median(ah, &coeff,
++ iqcal_idx, nmeasurement);
++ if (outlier_detect)
++ ar9003_hw_tx_iq_cal_outlier_detection(ah, &coeff, is_reusable);
+
+ return;
+
+@@ -1409,7 +1484,7 @@ skip_tx_iqcal:
+ }
+
+ if (txiqcal_done)
+- ar9003_hw_tx_iq_cal_post_proc(ah, is_reusable);
++ ar9003_hw_tx_iq_cal_post_proc(ah, 0, is_reusable);
+ else if (caldata && test_bit(TXIQCAL_DONE, &caldata->cal_flags))
+ ar9003_hw_tx_iq_cal_reload(ah);
+
+@@ -1455,14 +1530,38 @@ skip_tx_iqcal:
+ return true;
+ }
+
++static bool do_ar9003_agc_cal(struct ath_hw *ah)
++{
++ struct ath_common *common = ath9k_hw_common(ah);
++ bool status;
++
++ REG_WRITE(ah, AR_PHY_AGC_CONTROL,
++ REG_READ(ah, AR_PHY_AGC_CONTROL) |
++ AR_PHY_AGC_CONTROL_CAL);
++
++ status = ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
++ AR_PHY_AGC_CONTROL_CAL,
++ 0, AH_WAIT_TIMEOUT);
++ if (!status) {
++ ath_dbg(common, CALIBRATE,
++ "offset calibration failed to complete in %d ms,"
++ "noisy environment?\n",
++ AH_WAIT_TIMEOUT / 1000);
++ return false;
++ }
++
++ return true;
++}
++
+ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+ {
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_cal_data *caldata = ah->caldata;
+ bool txiqcal_done = false;
+- bool is_reusable = true, status = true;
++ bool status = true;
+ bool run_agc_cal = false, sep_iq_cal = false;
++ int i = 0;
+
+ /* Use chip chainmask only for calibration */
+ ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask);
+@@ -1485,7 +1584,12 @@ static bool ar9003_hw_init_cal_soc(struc
+ * AGC calibration. Specifically, AR9550 in SoC chips.
+ */
+ if (ah->enabled_cals & TX_IQ_ON_AGC_CAL) {
+- txiqcal_done = true;
++ if (REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_0,
++ AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL)) {
++ txiqcal_done = true;
++ } else {
++ txiqcal_done = false;
++ }
+ run_agc_cal = true;
+ } else {
+ sep_iq_cal = true;
+@@ -1512,27 +1616,37 @@ skip_tx_iqcal:
+ if (AR_SREV_9330_11(ah))
+ ar9003_hw_manual_peak_cal(ah, 0, IS_CHAN_2GHZ(chan));
+
+- /* Calibrate the AGC */
+- REG_WRITE(ah, AR_PHY_AGC_CONTROL,
+- REG_READ(ah, AR_PHY_AGC_CONTROL) |
+- AR_PHY_AGC_CONTROL_CAL);
+-
+- /* Poll for offset calibration complete */
+- status = ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
+- AR_PHY_AGC_CONTROL_CAL,
+- 0, AH_WAIT_TIMEOUT);
+- }
++ /*
++ * For non-AR9550 chips, we just trigger AGC calibration
++ * in the HW, poll for completion and then process
++ * the results.
++ *
++ * For AR955x, we run it multiple times and use
++ * median IQ correction.
++ */
++ if (!AR_SREV_9550(ah)) {
++ status = do_ar9003_agc_cal(ah);
++ if (!status)
++ return false;
+
+- if (!status) {
+- ath_dbg(common, CALIBRATE,
+- "offset calibration failed to complete in %d ms; noisy environment?\n",
+- AH_WAIT_TIMEOUT / 1000);
+- return false;
++ if (txiqcal_done)
++ ar9003_hw_tx_iq_cal_post_proc(ah, 0, false);
++ } else {
++ if (!txiqcal_done) {
++ status = do_ar9003_agc_cal(ah);
++ if (!status)
++ return false;
++ } else {
++ for (i = 0; i < MAXIQCAL; i++) {
++ status = do_ar9003_agc_cal(ah);
++ if (!status)
++ return false;
++ ar9003_hw_tx_iq_cal_post_proc(ah, i, false);
++ }
++ }
++ }
+ }
+
+- if (txiqcal_done)
+- ar9003_hw_tx_iq_cal_post_proc(ah, is_reusable);
+-
+ /* Revert chainmask to runtime parameters */
+ ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
+
+--- a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
++++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
+@@ -15,6 +15,8 @@
+ #ifndef RTL8187_H
+ #define RTL8187_H
+
++#include <linux/cache.h>
++
+ #include "rtl818x.h"
+ #include "leds.h"
+
+@@ -139,7 +141,10 @@ struct rtl8187_priv {
+ u8 aifsn[4];
+ u8 rfkill_mask;
+ struct {
+- __le64 buf;
++ union {
++ __le64 buf;
++ u8 dummy1[L1_CACHE_BYTES];
++ } ____cacheline_aligned;
+ struct sk_buff_head queue;
+ } b_tx_status; /* This queue is used by both -b and non-b devices */
+ struct mutex io_mutex;
+@@ -147,7 +152,8 @@ struct rtl8187_priv {
+ u8 bits8;
+ __le16 bits16;
+ __le32 bits32;
+- } *io_dmabuf;
++ u8 dummy2[L1_CACHE_BYTES];
++ } *io_dmabuf ____cacheline_aligned;
+ bool rfkill_off;
+ u16 seqno;
+ };
+--- a/net/mac80211/wme.c
++++ b/net/mac80211/wme.c
+@@ -154,6 +154,11 @@ u16 ieee80211_select_queue(struct ieee80
+ return IEEE80211_AC_BE;
+ }
+
++ if (skb->protocol == sdata->control_port_protocol) {
++ skb->priority = 7;
++ return ieee80211_downgrade_queue(sdata, skb);
++ }
++
+ /* use the data classifier to determine what 802.1d tag the
+ * data frame has */
+ rcu_read_lock();
+--- a/drivers/net/wireless/ath/ath9k/xmit.c
++++ b/drivers/net/wireless/ath/ath9k/xmit.c
+@@ -1444,14 +1444,16 @@ void ath_tx_aggr_sleep(struct ieee80211_
+ for (tidno = 0, tid = &an->tid[tidno];
+ tidno < IEEE80211_NUM_TIDS; tidno++, tid++) {
+
+- if (!tid->sched)
+- continue;
+-
+ ac = tid->ac;
+ txq = ac->txq;
+
+ ath_txq_lock(sc, txq);
+
++ if (!tid->sched) {
++ ath_txq_unlock(sc, txq);
++ continue;
++ }
++
+ buffered = ath_tid_has_buffered(tid);
+
+ tid->sched = false;
+@@ -1696,7 +1698,7 @@ int ath_cabq_update(struct ath_softc *sc
+
+ ath9k_hw_get_txq_props(sc->sc_ah, qnum, &qi);
+
+- qi.tqi_readyTime = (cur_conf->beacon_interval *
++ qi.tqi_readyTime = (TU_TO_USEC(cur_conf->beacon_interval) *
+ ATH_CABQ_READY_TIME) / 100;
+ ath_txq_update(sc, qnum, &qi);
+
+@@ -2184,14 +2186,15 @@ int ath_tx_start(struct ieee80211_hw *hw
+ txq->stopped = true;
+ }
+
++ if (txctl->an)
++ tid = ath_get_skb_tid(sc, txctl->an, skb);
++
+ if (info->flags & IEEE80211_TX_CTL_PS_RESPONSE) {
+ ath_txq_unlock(sc, txq);
+ txq = sc->tx.uapsdq;
+ ath_txq_lock(sc, txq);
+ } else if (txctl->an &&
+ ieee80211_is_data_present(hdr->frame_control)) {
+- tid = ath_get_skb_tid(sc, txctl->an, skb);
+-
+ WARN_ON(tid->ac->txq != txctl->txq);
+
+ if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT)
+--- a/drivers/net/wireless/ath/ath9k/init.c
++++ b/drivers/net/wireless/ath/ath9k/init.c
+@@ -943,6 +943,7 @@ static void ath9k_set_hw_capab(struct at
+ hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
+ hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ;
+ hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
++ hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
+
+ hw->queues = 4;
+ hw->max_rates = 4;
+--- a/net/mac80211/ieee80211_i.h
++++ b/net/mac80211/ieee80211_i.h
+@@ -1700,14 +1700,8 @@ void ieee80211_stop_queue_by_reason(stru
+ void ieee80211_propagate_queue_wake(struct ieee80211_local *local, int queue);
+ void ieee80211_add_pending_skb(struct ieee80211_local *local,
+ struct sk_buff *skb);
+-void ieee80211_add_pending_skbs_fn(struct ieee80211_local *local,
+- struct sk_buff_head *skbs,
+- void (*fn)(void *data), void *data);
+-static inline void ieee80211_add_pending_skbs(struct ieee80211_local *local,
+- struct sk_buff_head *skbs)
+-{
+- ieee80211_add_pending_skbs_fn(local, skbs, NULL, NULL);
+-}
++void ieee80211_add_pending_skbs(struct ieee80211_local *local,
++ struct sk_buff_head *skbs);
+ void ieee80211_flush_queues(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata);
+
+--- a/net/mac80211/sta_info.c
++++ b/net/mac80211/sta_info.c
+@@ -91,7 +91,7 @@ static int sta_info_hash_del(struct ieee
+ return -ENOENT;
+ }
+
+-static void cleanup_single_sta(struct sta_info *sta)
++static void __cleanup_single_sta(struct sta_info *sta)
+ {
+ int ac, i;
+ struct tid_ampdu_tx *tid_tx;
+@@ -99,7 +99,8 @@ static void cleanup_single_sta(struct st
+ struct ieee80211_local *local = sdata->local;
+ struct ps_data *ps;
+
+- if (test_sta_flag(sta, WLAN_STA_PS_STA)) {
++ if (test_sta_flag(sta, WLAN_STA_PS_STA) ||
++ test_sta_flag(sta, WLAN_STA_PS_DRIVER)) {
+ if (sta->sdata->vif.type == NL80211_IFTYPE_AP ||
+ sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+ ps = &sdata->bss->ps;
+@@ -109,6 +110,7 @@ static void cleanup_single_sta(struct st
+ return;
+
+ clear_sta_flag(sta, WLAN_STA_PS_STA);
++ clear_sta_flag(sta, WLAN_STA_PS_DRIVER);
+
+ atomic_dec(&ps->num_sta_ps);
+ sta_info_recalc_tim(sta);
+@@ -139,7 +141,14 @@ static void cleanup_single_sta(struct st
+ ieee80211_purge_tx_queue(&local->hw, &tid_tx->pending);
+ kfree(tid_tx);
+ }
++}
+
++static void cleanup_single_sta(struct sta_info *sta)
++{
++ struct ieee80211_sub_if_data *sdata = sta->sdata;
++ struct ieee80211_local *local = sdata->local;
++
++ __cleanup_single_sta(sta);
+ sta_info_free(local, sta);
+ }
+
+@@ -330,6 +339,7 @@ struct sta_info *sta_info_alloc(struct i
+ rcu_read_unlock();
+
+ spin_lock_init(&sta->lock);
++ spin_lock_init(&sta->ps_lock);
+ INIT_WORK(&sta->drv_unblock_wk, sta_unblock);
+ INIT_WORK(&sta->ampdu_mlme.work, ieee80211_ba_session_work);
+ mutex_init(&sta->ampdu_mlme.mtx);
+@@ -487,21 +497,26 @@ static int sta_info_insert_finish(struct
+ goto out_err;
+ }
+
+- /* notify driver */
+- err = sta_info_insert_drv_state(local, sdata, sta);
+- if (err)
+- goto out_err;
+-
+ local->num_sta++;
+ local->sta_generation++;
+ smp_mb();
+
++ /* simplify things and don't accept BA sessions yet */
++ set_sta_flag(sta, WLAN_STA_BLOCK_BA);
++
+ /* make the station visible */
+ sta_info_hash_add(local, sta);
+
+ list_add_rcu(&sta->list, &local->sta_list);
+
++ /* notify driver */
++ err = sta_info_insert_drv_state(local, sdata, sta);
++ if (err)
++ goto out_remove;
++
+ set_sta_flag(sta, WLAN_STA_INSERTED);
++ /* accept BA sessions now */
++ clear_sta_flag(sta, WLAN_STA_BLOCK_BA);
+
+ ieee80211_recalc_min_chandef(sdata);
+ ieee80211_sta_debugfs_add(sta);
+@@ -522,6 +537,12 @@ static int sta_info_insert_finish(struct
+ mesh_accept_plinks_update(sdata);
+
+ return 0;
++ out_remove:
++ sta_info_hash_del(local, sta);
++ list_del_rcu(&sta->list);
++ local->num_sta--;
++ synchronize_net();
++ __cleanup_single_sta(sta);
+ out_err:
+ mutex_unlock(&local->sta_mtx);
+ rcu_read_lock();
+@@ -1071,10 +1092,14 @@ struct ieee80211_sta *ieee80211_find_sta
+ }
+ EXPORT_SYMBOL(ieee80211_find_sta);
+
+-static void clear_sta_ps_flags(void *_sta)
++/* powersave support code */
++void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
+ {
+- struct sta_info *sta = _sta;
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
++ struct ieee80211_local *local = sdata->local;
++ struct sk_buff_head pending;
++ int filtered = 0, buffered = 0, ac;
++ unsigned long flags;
+ struct ps_data *ps;
+
+ if (sdata->vif.type == NL80211_IFTYPE_AP ||
+@@ -1085,20 +1110,6 @@ static void clear_sta_ps_flags(void *_st
+ else
+ return;
+
+- clear_sta_flag(sta, WLAN_STA_PS_DRIVER);
+- if (test_and_clear_sta_flag(sta, WLAN_STA_PS_STA))
+- atomic_dec(&ps->num_sta_ps);
+-}
+-
+-/* powersave support code */
+-void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
+-{
+- struct ieee80211_sub_if_data *sdata = sta->sdata;
+- struct ieee80211_local *local = sdata->local;
+- struct sk_buff_head pending;
+- int filtered = 0, buffered = 0, ac;
+- unsigned long flags;
+-
+ clear_sta_flag(sta, WLAN_STA_SP);
+
+ BUILD_BUG_ON(BITS_TO_LONGS(IEEE80211_NUM_TIDS) > 1);
+@@ -1109,6 +1120,8 @@ void ieee80211_sta_ps_deliver_wakeup(str
+
+ skb_queue_head_init(&pending);
+
++ /* sync with ieee80211_tx_h_unicast_ps_buf */
++ spin_lock(&sta->ps_lock);
+ /* Send all buffered frames to the station */
+ for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+ int count = skb_queue_len(&pending), tmp;
+@@ -1127,7 +1140,12 @@ void ieee80211_sta_ps_deliver_wakeup(str
+ buffered += tmp - count;
+ }
+
+- ieee80211_add_pending_skbs_fn(local, &pending, clear_sta_ps_flags, sta);
++ ieee80211_add_pending_skbs(local, &pending);
++ clear_sta_flag(sta, WLAN_STA_PS_DRIVER);
++ clear_sta_flag(sta, WLAN_STA_PS_STA);
++ spin_unlock(&sta->ps_lock);
++
++ atomic_dec(&ps->num_sta_ps);
+
+ /* This station just woke up and isn't aware of our SMPS state */
+ if (!ieee80211_smps_is_restrictive(sta->known_smps_mode,
+--- a/net/mac80211/sta_info.h
++++ b/net/mac80211/sta_info.h
+@@ -267,6 +267,7 @@ struct ieee80211_tx_latency_stat {
+ * @drv_unblock_wk: used for driver PS unblocking
+ * @listen_interval: listen interval of this station, when we're acting as AP
+ * @_flags: STA flags, see &enum ieee80211_sta_info_flags, do not use directly
++ * @ps_lock: used for powersave (when mac80211 is the AP) related locking
+ * @ps_tx_buf: buffers (per AC) of frames to transmit to this station
+ * when it leaves power saving state or polls
+ * @tx_filtered: buffers (per AC) of frames we already tried to
+@@ -356,10 +357,8 @@ struct sta_info {
+ /* use the accessors defined below */
+ unsigned long _flags;
+
+- /*
+- * STA powersave frame queues, no more than the internal
+- * locking required.
+- */
++ /* STA powersave lock and frame queues */
++ spinlock_t ps_lock;
+ struct sk_buff_head ps_tx_buf[IEEE80211_NUM_ACS];
+ struct sk_buff_head tx_filtered[IEEE80211_NUM_ACS];
+ unsigned long driver_buffered_tids;
+--- a/net/mac80211/util.c
++++ b/net/mac80211/util.c
+@@ -435,9 +435,8 @@ void ieee80211_add_pending_skb(struct ie
+ spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+ }
+
+-void ieee80211_add_pending_skbs_fn(struct ieee80211_local *local,
+- struct sk_buff_head *skbs,
+- void (*fn)(void *data), void *data)
++void ieee80211_add_pending_skbs(struct ieee80211_local *local,
++ struct sk_buff_head *skbs)
+ {
+ struct ieee80211_hw *hw = &local->hw;
+ struct sk_buff *skb;
+@@ -461,9 +460,6 @@ void ieee80211_add_pending_skbs_fn(struc
+ __skb_queue_tail(&local->pending[queue], skb);
+ }
+
+- if (fn)
+- fn(data);
+-
+ for (i = 0; i < hw->queues; i++)
+ __ieee80211_wake_queue(hw, i,
+ IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
+--- a/net/wireless/reg.c
++++ b/net/wireless/reg.c
+@@ -1700,7 +1700,7 @@ static void reg_process_hint(struct regu
+ return;
+ case NL80211_REGDOM_SET_BY_USER:
+ treatment = reg_process_hint_user(reg_request);
+- if (treatment == REG_REQ_OK ||
++ if (treatment == REG_REQ_IGNORE ||
+ treatment == REG_REQ_ALREADY_SET)
+ return;
+ schedule_delayed_work(®_timeout, msecs_to_jiffies(3142));
+--- a/drivers/net/wireless/ath/ath9k/debug.c
++++ b/drivers/net/wireless/ath/ath9k/debug.c
+@@ -138,43 +138,41 @@ static ssize_t read_file_ani(struct file
+ unsigned int len = 0, size = 1024;
+ ssize_t retval = 0;
+ char *buf;
++ int i;
++ struct {
++ const char *name;
++ unsigned int val;
++ } ani_info[] = {
++ { "ANI RESET", ah->stats.ast_ani_reset },
++ { "OFDM LEVEL", ah->ani.ofdmNoiseImmunityLevel },
++ { "CCK LEVEL", ah->ani.cckNoiseImmunityLevel },
++ { "SPUR UP", ah->stats.ast_ani_spurup },
++ { "SPUR DOWN", ah->stats.ast_ani_spurup },
++ { "OFDM WS-DET ON", ah->stats.ast_ani_ofdmon },
++ { "OFDM WS-DET OFF", ah->stats.ast_ani_ofdmoff },
++ { "MRC-CCK ON", ah->stats.ast_ani_ccklow },
++ { "MRC-CCK OFF", ah->stats.ast_ani_cckhigh },
++ { "FIR-STEP UP", ah->stats.ast_ani_stepup },
++ { "FIR-STEP DOWN", ah->stats.ast_ani_stepdown },
++ { "INV LISTENTIME", ah->stats.ast_ani_lneg_or_lzero },
++ { "OFDM ERRORS", ah->stats.ast_ani_ofdmerrs },
++ { "CCK ERRORS", ah->stats.ast_ani_cckerrs },
++ };
+
+ buf = kzalloc(size, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+- if (common->disable_ani) {
+- len += scnprintf(buf + len, size - len, "%s: %s\n",
+- "ANI", "DISABLED");
++ len += scnprintf(buf + len, size - len, "%15s: %s\n", "ANI",
++ common->disable_ani ? "DISABLED" : "ENABLED");
++
++ if (common->disable_ani)
+ goto exit;
+- }
+
+- len += scnprintf(buf + len, size - len, "%15s: %s\n",
+- "ANI", "ENABLED");
+- len += scnprintf(buf + len, size - len, "%15s: %u\n",
+- "ANI RESET", ah->stats.ast_ani_reset);
+- len += scnprintf(buf + len, size - len, "%15s: %u\n",
+- "SPUR UP", ah->stats.ast_ani_spurup);
+- len += scnprintf(buf + len, size - len, "%15s: %u\n",
+- "SPUR DOWN", ah->stats.ast_ani_spurup);
+- len += scnprintf(buf + len, size - len, "%15s: %u\n",
+- "OFDM WS-DET ON", ah->stats.ast_ani_ofdmon);
+- len += scnprintf(buf + len, size - len, "%15s: %u\n",
+- "OFDM WS-DET OFF", ah->stats.ast_ani_ofdmoff);
+- len += scnprintf(buf + len, size - len, "%15s: %u\n",
+- "MRC-CCK ON", ah->stats.ast_ani_ccklow);
+- len += scnprintf(buf + len, size - len, "%15s: %u\n",
+- "MRC-CCK OFF", ah->stats.ast_ani_cckhigh);
+- len += scnprintf(buf + len, size - len, "%15s: %u\n",
+- "FIR-STEP UP", ah->stats.ast_ani_stepup);
+- len += scnprintf(buf + len, size - len, "%15s: %u\n",
+- "FIR-STEP DOWN", ah->stats.ast_ani_stepdown);
+- len += scnprintf(buf + len, size - len, "%15s: %u\n",
+- "INV LISTENTIME", ah->stats.ast_ani_lneg_or_lzero);
+- len += scnprintf(buf + len, size - len, "%15s: %u\n",
+- "OFDM ERRORS", ah->stats.ast_ani_ofdmerrs);
+- len += scnprintf(buf + len, size - len, "%15s: %u\n",
+- "CCK ERRORS", ah->stats.ast_ani_cckerrs);
++ for (i = 0; i < ARRAY_SIZE(ani_info); i++)
++ len += scnprintf(buf + len, size - len, "%15s: %u\n",
++ ani_info[i].name, ani_info[i].val);
++
+ exit:
+ if (len > size)
+ len = size;
+@@ -866,6 +864,12 @@ static ssize_t read_file_reset(struct fi
+ "%17s: %2d\n", "PLL RX Hang",
+ sc->debug.stats.reset[RESET_TYPE_PLL_HANG]);
+ len += scnprintf(buf + len, sizeof(buf) - len,
++ "%17s: %2d\n", "MAC Hang",
++ sc->debug.stats.reset[RESET_TYPE_MAC_HANG]);
++ len += scnprintf(buf + len, sizeof(buf) - len,
++ "%17s: %2d\n", "Stuck Beacon",
++ sc->debug.stats.reset[RESET_TYPE_BEACON_STUCK]);
++ len += scnprintf(buf + len, sizeof(buf) - len,
+ "%17s: %2d\n", "MCI Reset",
+ sc->debug.stats.reset[RESET_TYPE_MCI]);
+
+--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
++++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+@@ -868,10 +868,6 @@ static void ar9003_hw_set_rfmode(struct
+
+ if (IS_CHAN_A_FAST_CLOCK(ah, chan))
+ rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE);
+- if (IS_CHAN_QUARTER_RATE(chan))
+- rfMode |= AR_PHY_MODE_QUARTER;
+- if (IS_CHAN_HALF_RATE(chan))
+- rfMode |= AR_PHY_MODE_HALF;
+
+ if (rfMode & (AR_PHY_MODE_QUARTER | AR_PHY_MODE_HALF))
+ REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL,
+--- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c
++++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
+@@ -706,6 +706,7 @@ ath5k_get_survey(struct ieee80211_hw *hw
+ survey->channel = conf->chandef.chan;
+ survey->noise = ah->ah_noise_floor;
+ survey->filled = SURVEY_INFO_NOISE_DBM |
++ SURVEY_INFO_IN_USE |
+ SURVEY_INFO_CHANNEL_TIME |
+ SURVEY_INFO_CHANNEL_TIME_BUSY |
+ SURVEY_INFO_CHANNEL_TIME_RX |
+--- a/drivers/net/wireless/ath/ath9k/recv.c
++++ b/drivers/net/wireless/ath/ath9k/recv.c
+@@ -732,11 +732,18 @@ static struct ath_rxbuf *ath_get_next_rx
+ return NULL;
+
+ /*
+- * mark descriptor as zero-length and set the 'more'
+- * flag to ensure that both buffers get discarded
++ * Re-check previous descriptor, in case it has been filled
++ * in the mean time.
+ */
+- rs->rs_datalen = 0;
+- rs->rs_more = true;
++ ret = ath9k_hw_rxprocdesc(ah, ds, rs);
++ if (ret == -EINPROGRESS) {
++ /*
++ * mark descriptor as zero-length and set the 'more'
++ * flag to ensure that both buffers get discarded
++ */
++ rs->rs_datalen = 0;
++ rs->rs_more = true;
++ }
+ }
+
+ list_del(&bf->list);
+@@ -985,32 +992,32 @@ static int ath9k_rx_skb_preprocess(struc
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_hdr *hdr;
+ bool discard_current = sc->rx.discard_next;
+- int ret = 0;
+
+ /*
+ * Discard corrupt descriptors which are marked in
+ * ath_get_next_rx_buf().
+ */
+- sc->rx.discard_next = rx_stats->rs_more;
+ if (discard_current)
+- return -EINVAL;
++ goto corrupt;
++
++ sc->rx.discard_next = false;
+
+ /*
+ * Discard zero-length packets.
+ */
+ if (!rx_stats->rs_datalen) {
+ RX_STAT_INC(rx_len_err);
+- return -EINVAL;
++ goto corrupt;
+ }
+
+- /*
+- * rs_status follows rs_datalen so if rs_datalen is too large
+- * we can take a hint that hardware corrupted it, so ignore
+- * those frames.
+- */
++ /*
++ * rs_status follows rs_datalen so if rs_datalen is too large
++ * we can take a hint that hardware corrupted it, so ignore
++ * those frames.
++ */
+ if (rx_stats->rs_datalen > (common->rx_bufsize - ah->caps.rx_status_len)) {
+ RX_STAT_INC(rx_len_err);
+- return -EINVAL;
++ goto corrupt;
+ }
+
+ /* Only use status info from the last fragment */
+@@ -1024,10 +1031,8 @@ static int ath9k_rx_skb_preprocess(struc
+ * This is different from the other corrupt descriptor
+ * condition handled above.
+ */
+- if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC) {
+- ret = -EINVAL;
+- goto exit;
+- }
++ if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC)
++ goto corrupt;
+
+ hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len);
+
+@@ -1043,18 +1048,15 @@ static int ath9k_rx_skb_preprocess(struc
+ if (ath_process_fft(sc, hdr, rx_stats, rx_status->mactime))
+ RX_STAT_INC(rx_spectral);
+
+- ret = -EINVAL;
+- goto exit;
++ return -EINVAL;
+ }
+
+ /*
+ * everything but the rate is checked here, the rate check is done
+ * separately to avoid doing two lookups for a rate for each frame.
+ */
+- if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) {
+- ret = -EINVAL;
+- goto exit;
+- }
++ if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error))
++ return -EINVAL;
+
+ if (ath_is_mybeacon(common, hdr)) {
+ RX_STAT_INC(rx_beacons);
+@@ -1064,15 +1066,11 @@ static int ath9k_rx_skb_preprocess(struc
+ /*
+ * This shouldn't happen, but have a safety check anyway.
+ */
+- if (WARN_ON(!ah->curchan)) {
+- ret = -EINVAL;
+- goto exit;
+- }
++ if (WARN_ON(!ah->curchan))
++ return -EINVAL;
+
+- if (ath9k_process_rate(common, hw, rx_stats, rx_status)) {
+- ret =-EINVAL;
+- goto exit;
+- }
++ if (ath9k_process_rate(common, hw, rx_stats, rx_status))
++ return -EINVAL;
+
+ ath9k_process_rssi(common, hw, rx_stats, rx_status);
+
+@@ -1087,9 +1085,11 @@ static int ath9k_rx_skb_preprocess(struc
+ sc->rx.num_pkts++;
+ #endif
+
+-exit:
+- sc->rx.discard_next = false;
+- return ret;
++ return 0;
++
++corrupt:
++ sc->rx.discard_next = rx_stats->rs_more;
++ return -EINVAL;
+ }
+
+ static void ath9k_rx_skb_postprocess(struct ath_common *common,
+--- a/drivers/net/wireless/ath/ath9k/ani.c
++++ b/drivers/net/wireless/ath/ath9k/ani.c
+@@ -176,16 +176,26 @@ static void ath9k_hw_set_ofdm_nil(struct
+ if (ah->opmode == NL80211_IFTYPE_STATION &&
+ BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_HIGH)
+ weak_sig = true;
+-
+ /*
+- * OFDM Weak signal detection is always enabled for AP mode.
++ * Newer chipsets are better at dealing with high PHY error counts -
++ * keep weak signal detection enabled when no RSSI threshold is
++ * available to determine if it is needed (mode != STA)
+ */
+- if (ah->opmode != NL80211_IFTYPE_AP &&
+- aniState->ofdmWeakSigDetect != weak_sig) {
+- ath9k_hw_ani_control(ah,
+- ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+- entry_ofdm->ofdm_weak_signal_on);
+- }
++ else if (AR_SREV_9300_20_OR_LATER(ah) &&
++ ah->opmode != NL80211_IFTYPE_STATION)
++ weak_sig = true;
++
++ /* Older chipsets are more sensitive to high PHY error counts */
++ else if (!AR_SREV_9300_20_OR_LATER(ah) &&
++ aniState->ofdmNoiseImmunityLevel >= 8)
++ weak_sig = false;
++
++ if (aniState->ofdmWeakSigDetect != weak_sig)
++ ath9k_hw_ani_control(ah, ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
++ weak_sig);
++
++ if (!AR_SREV_9300_20_OR_LATER(ah))
++ return;
+
+ if (aniState->ofdmNoiseImmunityLevel >= ATH9K_ANI_OFDM_DEF_LEVEL) {
+ ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
+@@ -483,10 +493,17 @@ void ath9k_hw_ani_init(struct ath_hw *ah
+
+ ath_dbg(common, ANI, "Initialize ANI\n");
+
+- ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
+- ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW;
+- ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH;
+- ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW;
++ if (AR_SREV_9300_20_OR_LATER(ah)) {
++ ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
++ ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW;
++ ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH;
++ ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW;
++ } else {
++ ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_OLD;
++ ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_OLD;
++ ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH_OLD;
++ ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW_OLD;
++ }
+
+ ani->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL;
+ ani->firstepLevel = ATH9K_ANI_FIRSTEP_LVL;
+--- a/drivers/net/wireless/ath/ath9k/ani.h
++++ b/drivers/net/wireless/ath/ath9k/ani.h
+@@ -22,12 +22,16 @@
+ /* units are errors per second */
+ #define ATH9K_ANI_OFDM_TRIG_HIGH 3500
+ #define ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI 1000
++#define ATH9K_ANI_OFDM_TRIG_HIGH_OLD 500
+
+ #define ATH9K_ANI_OFDM_TRIG_LOW 400
+ #define ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI 900
++#define ATH9K_ANI_OFDM_TRIG_LOW_OLD 200
+
+ #define ATH9K_ANI_CCK_TRIG_HIGH 600
++#define ATH9K_ANI_CCK_TRIG_HIGH_OLD 200
+ #define ATH9K_ANI_CCK_TRIG_LOW 300
++#define ATH9K_ANI_CCK_TRIG_LOW_OLD 100
+
+ #define ATH9K_ANI_SPUR_IMMUNE_LVL 3
+ #define ATH9K_ANI_FIRSTEP_LVL 2