#
-# Copyright (C) 2006-2012 OpenWrt.org
+# Copyright (C) 2006-2014 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
KCONFIG:=CONFIG_USB CONFIG_XPS_USB_HCD_XILINX=n CONFIG_USB_FHCI_HCD=n
FILES:= \
$(LINUX_DIR)/drivers/usb/core/usbcore.ko \
- $(LINUX_DIR)/drivers/usb/usb-common.ko
+ $(LINUX_DIR)/drivers/usb/common/usb-common.ko
AUTOLOAD:=$(call AutoLoad,20,usb-common usbcore,1)
$(call AddDepends/nls)
endef
endef
-define KernelPackage/musb-hdrc
+define KernelPackage/usb-musb-hdrc
TITLE:=Support for Mentor Graphics silicon dual role USB
KCONFIG:= \
CONFIG_USB_MUSB_HDRC \
- CONFIG_MUSB_PIO_ONLY=n \
+ CONFIG_USB_INVENTRA_DMA=n \
+ CONFIG_USB_TI_CPPI41_DMA=n \
+ CONFIG_MUSB_PIO_ONLY=y \
CONFIG_USB_MUSB_DUAL_ROLE=y \
+ CONFIG_USB_MUSB_GADGET=n \
+ CONFIG_USB_MUSB_HOST=n \
CONFIG_USB_MUSB_DEBUG=y
- DEPENDS:=@TARGET_omap24xx
+ DEPENDS:= \
+ @(TARGET_omap||TARGET_omap24xx) +kmod-usb-gadget \
+ +TARGET_omap24xx:kmod-usb-musb-tusb6010
FILES:=$(LINUX_DIR)/drivers/usb/musb/musb_hdrc.ko
AUTOLOAD:=$(call AutoLoad,46,musb_hdrc)
$(call AddDepends/usb)
endef
-define KernelPackage/musb-hdrc/description
+define KernelPackage/usb-musb-hdrc/description
Kernel support for Mentor Graphics silicon dual role USB device.
endef
-$(eval $(call KernelPackage,musb-hdrc))
-
+$(eval $(call KernelPackage,usb-musb-hdrc))
-define KernelPackage/nop-usb-xceiv
- TITLE:=Support for USB OTG NOP transceiver
+define KernelPackage/usb-musb-platformglue
+ TITLE:=MUSB platform glue layer
KCONFIG:= \
- CONFIG_NOP_USB_XCEIV
+ CONFIG_USB_MUSB_TUSB6010=n \
+ CONFIG_USB_MUSB_OMAP2PLUS=n \
+ CONFIG_USB_MUSB_AM35X=n \
+ CONFIG_USB_MUSB_DSPS \
+ CONFIG_USB_MUSB_UX500=n
+ DEPENDS:=@TARGET_omap +kmod-usb-phy-nop +kmod-usb-musb-hdrc +kmod-usb-phy-am335x
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/musb/musb_dsps.ko \
+ $(LINUX_DIR)/drivers/usb/musb/musb_am335x.ko
+ AUTOLOAD:=$(call AutoLoad,45,phy-omap-control musb_dsps musb_am335x)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-musb-platformglue/description
+ MUSB platform glue modules
+endef
+
+$(eval $(call KernelPackage,usb-musb-platformglue))
+
+
+define KernelPackage/usb-musb-tusb6010
+ TITLE:=Support for TUSB 6010
+ KCONFIG:=CONFIG_USB_MUSB_TUSB6010
DEPENDS:=@TARGET_omap24xx
- FILES:=$(LINUX_DIR)/drivers/usb/otg/nop-usb-xceiv.ko
- AUTOLOAD:=$(call AutoLoad,45,nop-usb-xceiv)
$(call AddDepends/usb)
endef
-define KernelPackage/nop-usb-xceiv/description
- Support for USB OTG NOP transceiver
+define KernelPackage/usb-musb-tusb6010/description
+ TUSB6010 support
endef
-$(eval $(call KernelPackage,nop-usb-xceiv))
+$(eval $(call KernelPackage,usb-musb-tusb6010))
+
+
+define KernelPackage/usb-phy-nop
+ TITLE:=Support for USB NOP transceiver
+ KCONFIG:=CONFIG_NOP_USB_XCEIV
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-generic.ko
+ AUTOLOAD:=$(call AutoLoad,43,phy-generic)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-nop/description
+ Support for USB NOP transceiver
+endef
+
+$(eval $(call KernelPackage,usb-phy-nop))
+
+
+define KernelPackage/usb-phy-am335x
+ TITLE:=Support for AM335x USB PHY
+ KCONFIG:= \
+ CONFIG_AM335X_PHY_USB \
+ CONFIG_AM335X_CONTROL_USB
+ DEPENDS:=@TARGET_omap +kmod-usb-phy-nop
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/phy/phy-am335x.ko \
+ $(LINUX_DIR)/drivers/usb/phy/phy-am335x-control.ko
+ AUTOLOAD:=$(call AutoLoad,44,phy-am335x)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-am335x/description
+ Support for AM335x USB PHY
+endef
+
+$(eval $(call KernelPackage,usb-phy-am335x))
+
+
+define KernelPackage/usb-phy-omap-usb2
+ TITLE:=Support for OMAP2 USB PHY
+ KCONFIG:= \
+ CONFIG_OMAP_USB2 \
+ CONFIG_OMAP_CONTROL_PHY
+ DEPENDS:=@TARGET_omap
+ FILES:= \
+ $(LINUX_DIR)/drivers/phy/phy-omap-usb2.ko \
+ $(LINUX_DIR)/drivers/phy/phy-omap-control.ko
+ AUTOLOAD:=$(call AutoLoad,45,phy-omap-control phy-omap-usb2)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-omap-usb2/description
+ Support for AM335x USB PHY
+endef
+
+$(eval $(call KernelPackage,usb-phy-omap-usb2))
+
+
+define KernelPackage/usb-phy-omap-usb3
+ TITLE:=Support for OMAP USB3 PHY
+ KCONFIG:=CONFIG_OMAP_USB3
+ DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2
+ FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-omap-usb3.ko
+ AUTOLOAD:=$(call AutoLoad,45,phy-omap-usb3)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-omap-usb3/description
+ Support for OMAP USB3 PHY
+endef
+
+$(eval $(call KernelPackage,usb-phy-omap-usb3))
+
+
+define KernelPackage/usb-phy-twl4030
+ TITLE:=Support for TWL4030 OTG PHY
+ KCONFIG:=CONFIG_TWL4030_USB
+ DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2 +kmod-usb-musb-hdrc
+ FILES:=$(LINUX_DIR)/drivers/phy/phy-twl4030-usb.ko
+ AUTOLOAD:=$(call AutoLoad,45,phy-twl4030-usb)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-twl4030/description
+ Support for TWL4030/TWL5030/TPS659x0 OTG PHY
+endef
+
+$(eval $(call KernelPackage,usb-phy-twl4030))
+
+
+define KernelPackage/usb-phy-twl6030
+ TITLE:=Support for TWL6030 OTG PHY
+ KCONFIG:=CONFIG_TWL6030_USB
+ DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2 +kmod-usb-musb-hdrc
+ FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-twl6030-usb.ko
+ AUTOLOAD:=$(call AutoLoad,45,phy-twl6030-usb)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-twl6030/description
+ Support for TWL6030 OTG PHY
+endef
+
+$(eval $(call KernelPackage,usb-phy-twl6030))
define KernelPackage/usb-gadget
TITLE:=USB Gadget support
KCONFIG:=CONFIG_USB_GADGET
- FILES:=$(LINUX_DIR)/drivers/usb/gadget/udc-core.ko
+ FILES:=\
+ $(LINUX_DIR)/drivers/usb/gadget/udc/udc-core.ko
AUTOLOAD:=$(call AutoLoad,45,udc-core)
DEPENDS:=@USB_GADGET_SUPPORT
$(call AddDepends/usb)
define KernelPackage/usb-lib-composite
TITLE:=USB lib composite
KCONFIG:=CONFIG_USB_LIBCOMPOSITE
- DEPENDS:=+kmod-usb-gadget +kmod-fs-configfs @!LINUX_3_3 @!LINUX_3_6
+ DEPENDS:=+kmod-usb-gadget +kmod-fs-configfs
FILES:=$(LINUX_DIR)/drivers/usb/gadget/libcomposite.ko
AUTOLOAD:=$(call AutoLoad,50,libcomposite)
$(call AddDepends/usb)
KCONFIG:= \
CONFIG_USB_ETH \
CONFIG_USB_ETH_RNDIS=y \
- CONFIG_USB_ETH_EEM=y
- DEPENDS:=+kmod-usb-gadget +(!LINUX_3_3&&!LINUX_3_6):kmod-usb-lib-composite
-ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/gadget/u_ether.ko),)
+ CONFIG_USB_ETH_EEM=n
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
FILES:= \
- $(LINUX_DIR)/drivers/usb/gadget/u_ether.ko \
- $(LINUX_DIR)/drivers/usb/gadget/u_rndis.ko \
- $(LINUX_DIR)/drivers/usb/gadget/usb_f_rndis.ko \
- $(LINUX_DIR)/drivers/usb/gadget/usb_f_eem.ko \
- $(LINUX_DIR)/drivers/usb/gadget/g_ether.ko
- AUTOLOAD:=$(call AutoLoad,52,g_ether)
-else
- FILES:=$(LINUX_DIR)/drivers/usb/gadget/g_ether.ko
- AUTOLOAD:=$(call AutoLoad,52,g_ether)
-endif
+ $(LINUX_DIR)/drivers/usb/gadget/function/u_ether.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm_subset.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_rndis.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_ether.ko
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_ecm g_ether)
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usb-eth-gadget))
+define KernelPackage/usb-serial-gadget
+ TITLE:=USB Serial Gadget support
+ KCONFIG:=CONFIG_USB_G_SERIAL
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/gadget/function/u_serial.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_acm.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_obex.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_serial.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_serial.ko
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_acm g_serial)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-serial-gadget/description
+ Kernel support for USB Serial Gadget.
+endef
+
+$(eval $(call KernelPackage,usb-serial-gadget))
+
+define KernelPackage/usb-mass-storage-gadget
+ TITLE:=USB Mass Storage support
+ KCONFIG:=CONFIG_USB_MASS_STORAGE
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_mass_storage.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_mass_storage.ko
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_mass_storage g_mass_storage)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-mass-storage-gadget/description
+ Kernel support for USB Gadget Mass Storage
+endef
+
+$(eval $(call KernelPackage,usb-mass-storage-gadget))
+
+
+define KernelPackage/usb-storage-gadget
+ TITLE:=USB Mass Storage Gadget support
+ KCONFIG:=CONFIG_USB_F_MASS_STORAGE
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_mass_storage.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_storage.ko
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_mass_storage g_storage)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-storage-gadget/description
+ Kernel support for USB Mass Storage Gadget.
+endef
+
+$(eval $(call KernelPackage,usb-storage-gadget))
+
+
define KernelPackage/usb-uhci
TITLE:=Support for UHCI controllers
KCONFIG:= \
define KernelPackage/usb-ohci
TITLE:=Support for OHCI controllers
- DEPENDS:=+TARGET_brcm47xx:kmod-usb-brcm47xx
+ DEPENDS:= \
+ +TARGET_bcm53xx:kmod-usb-bcma \
+ +TARGET_brcm47xx:kmod-usb-bcma \
+ +TARGET_brcm47xx:kmod-usb-ssb
KCONFIG:= \
CONFIG_USB_OHCI \
CONFIG_USB_OHCI_HCD \
CONFIG_USB_OHCI_ATH79=y \
+ CONFIG_USB_OHCI_HCD_AT91=y \
CONFIG_USB_OHCI_BCM63XX=y \
CONFIG_USB_OCTEON_OHCI=y \
CONFIG_USB_OHCI_HCD_OMAP3=y \
CONFIG_USB_OHCI_HCD_PLATFORM=y
- FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko
- AUTOLOAD:=$(call AutoLoad,50,ohci-hcd,1)
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko \
+ $(LINUX_DIR)/drivers/usb/host/ohci-platform.ko
+ ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ohci-at91.ko),)
+ FILES+=$(LINUX_DIR)/drivers/usb/host/ohci-at91.ko
+ endif
+ AUTOLOAD:=$(call AutoLoad,50,ohci-hcd ohci-platform ohci-at91,1)
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usb-ohci,1))
+define KernelPackage/usb-ohci-pci
+ TITLE:=Support for PCI OHCI controllers
+ DEPENDS:=@PCI_SUPPORT +kmod-usb-ohci
+ KCONFIG:=CONFIG_USB_OHCI_HCD_PCI
+ FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-pci.ko
+ AUTOLOAD:=$(call AutoLoad,51,ohci-pci,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-ohci-pci/description
+ Kernel support for PCI OHCI controllers
+endef
+
+$(eval $(call KernelPackage,usb-ohci-pci))
+
+
define KernelPackage/usb2-fsl
TITLE:=Support for Freescale USB2 controllers
DEPENDS:=@TARGET_mpc85xx
- KCONFIG:=\
- CONFIG_USB_FSL_MPH_DR_OF \
- CONFIG_USB_EHCI_FSL=y
+ HIDDEN:=1
+ KCONFIG:=CONFIG_USB_FSL_MPH_DR_OF
FILES:=$(LINUX_DIR)/drivers/usb/host/fsl-mph-dr-of.ko
AUTOLOAD:=$(call AutoLoad,39,fsl-mph-dr-of,1)
$(call AddDepends/usb)
$(eval $(call KernelPackage,usb2-fsl))
+define KernelPackage/usb2-omap
+ TITLE:=Support for USB2 for OMAP
+ DEPENDS:=@TARGET_omap +kmod-usb-phy-nop +kmod-usb-phy-am335x +kmod-usb2
+ KCONFIG:=\
+ CONFIG_MFD_OMAP_USB_HOST=y \
+ CONFIG_USB_EHCI_HCD_OMAP
+ FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-omap.ko
+ AUTOLOAD:=$(call AutoLoad,39,ehci-omap)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb2-omap/description
+ Kernel support for OMAP USB2 (EHCI) controllers
+endef
+
+$(eval $(call KernelPackage,usb2-omap))
+
+define KernelPackage/usb-bcma
+ TITLE:=Support for BCMA USB controllers
+ DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx||TARGET_bcm53xx
+ HIDDEN:=1
+ KCONFIG:=CONFIG_USB_HCD_BCMA
+ FILES:= \
+ $(if $(CONFIG_USB_HCD_BCMA),$(LINUX_DIR)/drivers/usb/host/bcma-hcd.ko)
+ AUTOLOAD:=$(call AutoLoad,19,$(if $(CONFIG_USB_HCD_BCMA),bcma-hcd),1)
+ $(call AddDepends/usb)
+endef
+$(eval $(call KernelPackage,usb-bcma))
+
+define KernelPackage/usb-ssb
+ TITLE:=Support for SSB USB controllers
+ DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx
+ HIDDEN:=1
+ KCONFIG:=CONFIG_USB_HCD_SSB
+ FILES:= \
+ $(if $(CONFIG_USB_HCD_SSB),$(LINUX_DIR)/drivers/usb/host/ssb-hcd.ko)
+ AUTOLOAD:=$(call AutoLoad,19,$(if $(CONFIG_USB_HCD_SSB),ssb-hcd),1)
+ $(call AddDepends/usb)
+endef
+$(eval $(call KernelPackage,usb-ssb))
+
define KernelPackage/usb2
TITLE:=Support for USB2 controllers
DEPENDS:=\
- +TARGET_brcm47xx:kmod-usb-brcm47xx \
+ +TARGET_brcm47xx:kmod-usb-bcma \
+ +TARGET_brcm47xx:kmod-usb-ssb \
+ +TARGET_bcm53xx:kmod-usb-bcma \
+TARGET_mpc85xx:kmod-usb2-fsl
KCONFIG:=\
CONFIG_USB_EHCI_HCD \
CONFIG_USB_EHCI_MXC=y \
CONFIG_USB_OCTEON_EHCI=y \
CONFIG_USB_EHCI_HCD_ORION=y \
- CONFIG_USB_EHCI_HCD_PLATFORM=y
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,3.8.0)),1)
+ CONFIG_USB_EHCI_HCD_PLATFORM=y \
+ CONFIG_USB_EHCI_HCD_AT91=y \
+ CONFIG_USB_EHCI_FSL
FILES:= \
$(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko \
$(LINUX_DIR)/drivers/usb/host/ehci-platform.ko
- AUTOLOAD:=$(call AutoLoad,40,ehci-hcd ehci-platform,1)
-else
- FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko
- AUTOLOAD:=$(call AutoLoad,40,ehci-hcd,1)
-endif
+ ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-orion.ko),)
+ FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-orion.ko
+ endif
+ ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-atmel.ko),)
+ FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-atmel.ko
+ endif
+ ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-fsl.ko),)
+ FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-fsl.ko
+ endif
+ AUTOLOAD:=$(call AutoLoad,40,ehci-hcd ehci-platform ehci-orion ehci-atmel ehci-fsl,1)
$(call AddDepends/usb)
endef
define KernelPackage/usb2-pci
TITLE:=Support for PCI USB2 controllers
- DEPENDS:=@PCI_SUPPORT @(!LINUX_3_3&&!LINUX_3_6) +kmod-usb2
+ DEPENDS:=@PCI_SUPPORT +kmod-usb2
KCONFIG:=CONFIG_USB_EHCI_PCI
FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-pci.ko
AUTOLOAD:=$(call AutoLoad,42,ehci-pci,1)
define KernelPackage/usb-dwc2
TITLE:=DWC2 USB controller driver
- DEPENDS:=@(!LINUX_3_3&&!LINUX_3_6&&!LINUX_3_8&&!LINUX_3_9)
+ DEPENDS:=+(TARGET_brcm2708||TARGET_at91||TARGET_brcm63xx||TARGET_mxs||TARGET_imx6||TARGET_omap||TARGET_socfpga):kmod-usb-gadget
KCONFIG:= \
CONFIG_USB_DWC2 \
+ CONFIG_USB_DWC2_PCI \
+ CONFIG_USB_DWC2_PLATFORM \
CONFIG_USB_DWC2_DEBUG=n \
CONFIG_USB_DWC2_VERBOSE=n \
- CONFIG_USB_DWC2_TRACK_MISSED_SOFS=n
+ CONFIG_USB_DWC2_TRACK_MISSED_SOFS=n \
+ CONFIG_USB_DWC2_DEBUG_PERIODIC=n
+ CONFIG_USB_DWC2_DUAL_ROLE=y
FILES:= \
- $(LINUX_DIR)/drivers/staging/dwc2/dwc2.ko \
- $(LINUX_DIR)/drivers/staging/dwc2/dwc2_platform.ko
- AUTOLOAD:=$(call AutoLoad,54,dwc2 dwc2_platform,1)
+ $(LINUX_DIR)/drivers/usb/dwc2/dwc2.ko \
+ $(LINUX_DIR)/drivers/usb/dwc2/dwc2_platform.ko@lt4.3
+ AUTOLOAD:=$(call AutoLoad,54,dwc2 dwc2_platform@lt4.3,1)
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usb-dwc2))
+define KernelPackage/usb2-oxnas
+ TITLE:=OXNAS USB controller driver
+ DEPENDS:=@TARGET_oxnas +kmod-usb2
+ KCONFIG:=CONFIG_USB_EHCI_OXNAS
+ FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-oxnas.ko
+ AUTOLOAD:=$(call AutoLoad,55,ehci-oxnas,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb2-oxnas/description
+ This driver provides USB Device Controller support for the
+ EHCI USB host built-in to the PLXTECH NAS782x SoC
+endef
+
+$(eval $(call KernelPackage,usb2-oxnas))
+
+
+define KernelPackage/usb-dwc3
+ TITLE:=DWC3 USB controller driver
+ KCONFIG:= \
+ CONFIG_USB_DWC3 \
+ CONFIG_USB_DWC3_HOST=y \
+ CONFIG_USB_DWC3_GADGET=n \
+ CONFIG_USB_DWC3_DUAL_ROLE=n \
+ CONFIG_USB_DWC3_DEBUG=n \
+ CONFIG_USB_DWC3_VERBOSE=n
+ FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3.ko
+ AUTOLOAD:=$(call AutoLoad,54,dwc3,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-dwc3/description
+ This driver provides support for the Dual Role SuperSpeed
+ USB Controller based on the Synopsys DesignWare USB3 IP Core
+endef
+
+$(eval $(call KernelPackage,usb-dwc3))
+
+
define KernelPackage/usb-acm
TITLE:=Support for modems/isdn controllers
KCONFIG:=CONFIG_USB_ACM
TITLE:=Support for USB audio devices
KCONFIG:= \
CONFIG_USB_AUDIO \
+ CONFIG_SND_USB=y \
CONFIG_SND_USB_AUDIO
$(call AddDepends/usb)
$(call AddDepends/sound)
-# For Linux 2.6.35+
-ifneq ($(wildcard $(LINUX_DIR)/sound/usb/snd-usbmidi-lib.ko),)
FILES:= \
$(LINUX_DIR)/sound/usb/snd-usbmidi-lib.ko \
$(LINUX_DIR)/sound/usb/snd-usb-audio.ko
AUTOLOAD:=$(call AutoProbe,snd-usbmidi-lib snd-usb-audio)
-else
- FILES:= \
- $(LINUX_DIR)/sound/usb/snd-usb-lib.ko \
- $(LINUX_DIR)/sound/usb/snd-usb-audio.ko
- AUTOLOAD:=$(call AutoProbe,snd-usb-lib snd-usb-audio)
-endif
endef
define KernelPackage/usb-audio/description
$(eval $(call KernelPackage,usb-serial-ftdi))
+define KernelPackage/usb-serial-garmin
+ TITLE:=Support for Garmin GPS devices
+ KCONFIG:=CONFIG_USB_SERIAL_GARMIN
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/garmin_gps.ko
+ AUTOLOAD:=$(call AutoProbe,garmin_gps)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-garmin/description
+ Should work with most Garmin GPS devices which have a native USB port.
+endef
+
+$(eval $(call KernelPackage,usb-serial-garmin))
+
+
+define KernelPackage/usb-serial-simple
+ TITLE:=USB Serial Simple (Motorola phone)
+ KCONFIG:=CONFIG_USB_SERIAL_SIMPLE
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/usb-serial-simple.ko
+ AUTOLOAD:=$(call AutoProbe,usb-serial-simple)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-simple/description
+ Kernel support for "very simple devices".
+
+Specifically, it supports:
+ - Suunto ANT+ USB device.
+ - Medtronic CareLink USB device (3.18)
+ - Fundamental Software dongle.
+ - Google USB serial devices (3.19)
+ - HP4x calculators
+ - a number of Motorola phones
+ - Novatel Wireless GPS receivers (3.18)
+ - Siemens USB/MPI adapter.
+ - ViVOtech ViVOpay USB device.
+ - Infineon Modem Flashloader USB interface
+ - ZIO Motherboard USB serial interface
+endef
+
+$(eval $(call KernelPackage,usb-serial-simple))
+
+
define KernelPackage/usb-serial-ti-usb
TITLE:=Support for TI USB 3410/5052
KCONFIG:=CONFIG_USB_SERIAL_TI
$(eval $(call KernelPackage,usb-serial-sierrawireless))
-define KernelPackage/usb-serial-motorola-phone
- TITLE:=Support for Motorola usb phone
- KCONFIG:=CONFIG_USB_SERIAL_MOTOROLA
- FILES:=$(LINUX_DIR)/drivers/usb/serial/moto_modem.ko
- AUTOLOAD:=$(call AutoProbe,moto_modem)
- $(call AddDepends/usb-serial)
-endef
-
-define KernelPackage/usb-serial-motorola-phone/description
- Kernel support for Motorola usb phone
-endef
-
-$(eval $(call KernelPackage,usb-serial-motorola-phone))
-
-
define KernelPackage/usb-serial-visor
TITLE:=Support for Handspring Visor devices
KCONFIG:=CONFIG_USB_SERIAL_VISOR
define KernelPackage/usb-net
TITLE:=Kernel modules for USB-to-Ethernet convertors
- KCONFIG:=CONFIG_USB_USBNET CONFIG_MII=y
+ DEPENDS:=+kmod-mii
+ KCONFIG:=CONFIG_USB_USBNET \
+ CONFIG_USB_NET_DRIVERS
AUTOLOAD:=$(call AutoProbe,usbnet)
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),lt,3.12.0)),1)
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/usbnet.ko
-else
- FILES:=\
- $(LINUX_DIR)/drivers/$(USBNET_DIR)/usbnet.ko \
- $(LINUX_DIR)/drivers/net/mii.ko
-endif
$(call AddDepends/usb)
endef
define KernelPackage/usb-net-asix
TITLE:=Kernel module for USB-to-Ethernet Asix convertors
- DEPENDS:=+!LINUX_3_3:kmod-libphy
+ DEPENDS:=+kmod-libphy
KCONFIG:=CONFIG_USB_NET_AX8817X
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/asix.ko
AUTOLOAD:=$(call AutoProbe,asix)
$(eval $(call KernelPackage,usb-net-asix))
+define KernelPackage/usb-net-asix-ax88179
+ TITLE:=Kernel module for USB-to-Gigabit-Ethernet Asix convertors
+ DEPENDS:=+kmod-libphy
+ KCONFIG:=CONFIG_USB_NET_AX88179_178A
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/ax88179_178a.ko
+ AUTOLOAD:=$(call AutoProbe,ax88179_178a)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-asix-ax88179/description
+ Kernel module for USB-to-Ethernet ASIX AX88179 based USB 3.0/2.0
+ to Gigabit Ethernet adapters.
+endef
+
+$(eval $(call KernelPackage,usb-net-asix-ax88179))
+
+
define KernelPackage/usb-net-hso
TITLE:=Kernel module for Option USB High Speed Mobile Devices
KCONFIG:=CONFIG_USB_HSO
$(eval $(call KernelPackage,usb-net-mcs7830))
+define KernelPackage/usb-net-smsc95xx
+ TITLE:=SMSC LAN95XX based USB 2.0 10/100 ethernet devices
+ KCONFIG:=CONFIG_USB_NET_SMSC95XX
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/smsc95xx.ko
+ AUTOLOAD:=$(call AutoProbe,smsc95xx)
+ $(call AddDepends/usb-net, +kmod-lib-crc16)
+endef
+
+define KernelPackage/usb-net-smsc95xx/description
+ Kernel module for SMSC LAN95XX based devices
+endef
+
+$(eval $(call KernelPackage,usb-net-smsc95xx))
+
+
define KernelPackage/usb-net-dm9601-ether
TITLE:=Support for DM9601 ethernet connections
KCONFIG:=CONFIG_USB_NET_DM9601
$(eval $(call KernelPackage,usb-net-cdc-ether))
+define KernelPackage/usb-net-cdc-eem
+ TITLE:=Support for CDC EEM connections
+ KCONFIG:=CONFIG_USB_NET_CDC_EEM
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_eem.ko
+ AUTOLOAD:=$(call AutoProbe,cdc_eem)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-cdc-eem/description
+ Kernel support for USB CDC EEM
+endef
+
+$(eval $(call KernelPackage,usb-net-cdc-eem))
+
+
+define KernelPackage/usb-net-cdc-subset
+ TITLE:=Support for CDC Ethernet subset connections
+ KCONFIG:= \
+ CONFIG_USB_NET_CDC_SUBSET \
+ CONFIG_USB_ARMLINUX
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_subset.ko
+ AUTOLOAD:=$(call AutoProbe,cdc_subset)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-cdc-subset/description
+ Kernel support for Simple USB Network Links (CDC Ethernet subset)
+endef
+
+$(eval $(call KernelPackage,usb-net-cdc-subset))
+
+
define KernelPackage/usb-net-qmi-wwan
TITLE:=QMI WWAN driver
KCONFIG:=CONFIG_USB_NET_QMI_WWAN
$(eval $(call KernelPackage,usb-net-qmi-wwan))
+define KernelPackage/usb-net-rtl8150
+ TITLE:=Kernel module for USB-to-Ethernet Realtek convertors
+ KCONFIG:=CONFIG_USB_RTL8150
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/rtl8150.ko
+ AUTOLOAD:=$(call AutoProbe,rtl8150)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-rtl8150/description
+ Kernel module for USB-to-Ethernet Realtek 8150 convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-rtl8150))
+
+
+define KernelPackage/usb-net-rtl8152
+ TITLE:=Kernel module for USB-to-Ethernet Realtek convertors
+ KCONFIG:=CONFIG_USB_RTL8152
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/r8152.ko
+ AUTOLOAD:=$(call AutoProbe,r8152)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-rtl8152/description
+ Kernel module for USB-to-Ethernet Realtek 8152 USB2.0/3.0 convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-rtl8152))
+
+
+define KernelPackage/usb-net-sr9700
+ TITLE:=Support for CoreChip SR9700 ethernet devices
+ KCONFIG:=CONFIG_USB_NET_SR9700
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/sr9700.ko
+ AUTOLOAD:=$(call AutoProbe,sr9700)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-sr9700/description
+ Kernel module for CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices
+endef
+
+$(eval $(call KernelPackage,usb-net-sr9700))
+
+
define KernelPackage/usb-net-rndis
TITLE:=Support for RNDIS connections
KCONFIG:=CONFIG_USB_NET_RNDIS_HOST
$(eval $(call KernelPackage,usb-net-cdc-ncm))
+define KernelPackage/usb-net-huawei-cdc-ncm
+ TITLE:=Support for Huawei CDC NCM connections
+ KCONFIG:=CONFIG_USB_NET_HUAWEI_CDC_NCM
+ FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/huawei_cdc_ncm.ko
+ AUTOLOAD:=$(call AutoProbe,huawei_cdc_ncm)
+ $(call AddDepends/usb-net,+kmod-usb-net-cdc-ncm +kmod-usb-wdm)
+endef
+
+define KernelPackage/usb-net-huawei-cdc-ncm/description
+ Kernel support for Huawei CDC NCM connections
+endef
+
+$(eval $(call KernelPackage,usb-net-huawei-cdc-ncm))
+
+
define KernelPackage/usb-net-sierrawireless
TITLE:=Support for Sierra Wireless devices
KCONFIG:=CONFIG_USB_SIERRA_NET
define KernelPackage/usb-hid
TITLE:=Support for USB Human Input Devices
KCONFIG:=CONFIG_HID_SUPPORT=y CONFIG_USB_HID CONFIG_USB_HIDDEV=y
+ DEPENDS:=+kmod-hid +kmod-hid-generic +kmod-input-evdev
FILES:=$(LINUX_DIR)/drivers/$(USBHID_DIR)/usbhid.ko
AUTOLOAD:=$(call AutoProbe,usbhid)
$(call AddDepends/usb)
- $(call AddDepends/hid)
- $(call AddDepends/input,+kmod-input-evdev)
endef
define KernelPackage/usb-hid/description
define KernelPackage/usb-yealink
TITLE:=USB Yealink VOIP phone
+ DEPENDS:=+kmod-input-evdev
KCONFIG:=CONFIG_USB_YEALINK CONFIG_INPUT_YEALINK CONFIG_INPUT=m CONFIG_INPUT_MISC=y
FILES:=$(LINUX_DIR)/drivers/$(USBINPUT_DIR)/yealink.ko
AUTOLOAD:=$(call AutoProbe,yealink)
$(call AddDepends/usb)
- $(call AddDepends/input,+kmod-input-evdev)
endef
define KernelPackage/usb-yealink/description
define KernelPackage/usb-cm109
TITLE:=Support for CM109 device
+ DEPENDS:=+kmod-input-evdev
KCONFIG:=CONFIG_USB_CM109 CONFIG_INPUT_CM109 CONFIG_INPUT=m CONFIG_INPUT_MISC=y
FILES:=$(LINUX_DIR)/drivers/$(USBINPUT_DIR)/cm109.ko
AUTOLOAD:=$(call AutoProbe,cm109)
$(call AddDepends/usb)
- $(call AddDepends/input,+kmod-input-evdev)
endef
define KernelPackage/usb-cm109/description
KCONFIG:= \
CONFIG_USBIP_CORE \
CONFIG_USBIP_DEBUG=n
- FILES:=$(LINUX_DIR)/drivers/staging/usbip/usbip-core.ko
+ FILES:=$(LINUX_DIR)/drivers/usb/usbip/usbip-core.ko
AUTOLOAD:=$(call AutoProbe,usbip-core)
$(call AddDepends/usb)
endef
TITLE := USB-over-IP client driver
DEPENDS := +kmod-usbip
KCONFIG := CONFIG_USBIP_VHCI_HCD
- FILES := $(LINUX_DIR)/drivers/staging/usbip/vhci-hcd.$(LINUX_KMOD_SUFFIX)
+ FILES :=$(LINUX_DIR)/drivers/usb/usbip/vhci-hcd.ko
AUTOLOAD := $(call AutoProbe,vhci-hcd)
$(call AddDepends/usb)
endef
TITLE := USB-over-IP host driver
DEPENDS := +kmod-usbip
KCONFIG := CONFIG_USBIP_HOST
- FILES := $(LINUX_DIR)/drivers/staging/usbip/usbip-host.ko
+ FILES :=$(LINUX_DIR)/drivers/usb/usbip/usbip-host.ko
AUTOLOAD := $(call AutoProbe,usbip-host)
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usbip-server))
-define KernelPackage/usb-chipidea
+define KernelPackage/usb-chipidea-imx
TITLE:=Support for ChipIdea controllers
- DEPENDS:=+kmod-usb2
+ DEPENDS:=@TARGET_imx6||TARGET_mxs +kmod-usb2 +USB_GADGET_SUPPORT:kmod-usb-gadget
KCONFIG:=\
CONFIG_USB_CHIPIDEA \
CONFIG_USB_CHIPIDEA_HOST=y \
- CONFIG_USB_CHIPIDEA_UDC=n \
+ CONFIG_USB_CHIPIDEA_UDC=y \
CONFIG_USB_CHIPIDEA_DEBUG=y
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),lt,3.11.0)),1)
- FILES:=\
- $(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc.ko \
- $(if $(CONFIG_OF_DEVICE),$(LINUX_DIR)/drivers/usb/chipidea/ci13xxx_imx.ko) \
- $(if $(CONFIG_OF_DEVICE),$(LINUX_DIR)/drivers/usb/chipidea/usbmisc_imx$(if $(call kernel_patchver_le,3.9),6q).ko)
- AUTOLOAD:=$(call AutoLoad,51,ci_hdrc $(if $(CONFIG_OF_DEVICE),ci13xxx_imx usbmisc_imx$(if $(call kernel_patchver_le,3.9),6q)),1)
-else
FILES:=\
$(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc.ko \
$(if $(CONFIG_OF),$(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc_imx.ko) \
$(if $(CONFIG_OF),$(LINUX_DIR)/drivers/usb/chipidea/usbmisc_imx.ko)
AUTOLOAD:=$(call AutoLoad,51,ci_hdrc $(if $(CONFIG_OF),ci_hdrc_imx usbmisc_imx),1)
-endif
$(call AddDepends/usb)
endef
-
-define KernelPackage/usb-chipidea/description
+
+define KernelPackage/usb-chipidea-imx/description
Kernel support for USB ChipIdea controllers
endef
-$(eval $(call KernelPackage,usb-chipidea,1))
+$(eval $(call KernelPackage,usb-chipidea-imx,1))
define KernelPackage/usb-mxs-phy
TITLE:=Support for Freescale MXS USB PHY
- DEPENDS:=@TARGET_imx6
+ DEPENDS:=@TARGET_imx6||TARGET_mxs +TARGET_mxs:kmod-usb-chipidea-imx
KCONFIG:=CONFIG_USB_MXS_PHY
FILES:=\
$(LINUX_DIR)/drivers/usb/phy/phy-mxs-usb.ko
$(eval $(call KernelPackage,usbmon))
+XHCI_MODULES := xhci-hcd xhci-pci xhci-plat-hcd
+ifdef CONFIG_TARGET_ramips_mt7621
+ XHCI_MODULES += xhci-mtk
+endif
+XHCI_FILES := $(wildcard $(patsubst %,$(LINUX_DIR)/drivers/usb/host/%.ko,$(XHCI_MODULES)))
+XHCI_AUTOLOAD := $(patsubst $(LINUX_DIR)/drivers/usb/host/%.ko,%,$(XHCI_FILES))
define KernelPackage/usb3
TITLE:=Support for USB3 controllers
+ DEPENDS:= \
+ +TARGET_bcm53xx:kmod-usb-bcma \
+ +TARGET_omap:kmod-usb-phy-omap-usb3
KCONFIG:= \
CONFIG_USB_XHCI_HCD \
+ CONFIG_USB_XHCI_PCI \
+ CONFIG_USB_XHCI_PLATFORM \
+ CONFIG_USB_XHCI_MVEBU=y \
+ CONFIG_USB_XHCI_MTK \
CONFIG_USB_XHCI_HCD_DEBUGGING=n
FILES:= \
- $(LINUX_DIR)/drivers/usb/host/xhci-hcd.ko
- AUTOLOAD:=$(call AutoLoad,54,xhci-hcd,1)
+ $(XHCI_FILES)
+ AUTOLOAD:=$(call AutoLoad,54,$(XHCI_AUTOLOAD),1)
$(call AddDepends/usb)
endef
projects / openwrt.git / blobdiff