/dts-v1/; /include/ "rt3883.dtsi" / { compatible = "OMNI-EMB-HPM", "ralink,rt3883-soc"; model = "Omnima EMB HPM"; chosen { bootargs = "console=ttyS0,115200"; }; palmbus@10000000 { spi@b00 { status = "okay"; m25p80@0 { compatible = "macronix,mx25l12805d"; spi-max-frequency = <25000000>; reg = <0>; #address-cells = <1>; #size-cells = <1>; partition@0 { reg = <0x0 0x0030000>; label = "u-boot"; read-only; }; partition@30000 { reg = <0x00030000 0x00010000>; label = "config"; read-only; }; partition@40000 { reg = <0x00040000 0x00010000>; label = "factory"; read-only; }; partition@50000 { reg = <0x00050000 0x00fb0000>; label = "firmware"; }; }; }; }; pinctrl { state_default: pinctrl0 { gpio { ralink,group = "i2c", "jtag", "uartf"; ralink,function = "gpio"; }; }; }; ethernet@10100000 { phy-handle = <&phy0>; phy-mode = "rgmii"; mdio-bus { status = "okay"; phy0: ethernet-phy@4 { reg = <4>; }; }; }; ehci@101c0000 { status = "okay"; }; ohci@101c1000 { status = "okay"; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <100>; reset { label = "reset"; gpios = <&gpio0 14 0>; linux,code = <0x198>; }; }; gpio-leds { compatible = "gpio-leds"; power { label = "emb:orange:power"; gpios = <&gpio0 7 1>; }; status { label = "emb:green:status"; gpios = <&gpio0 21 1>; }; eth { label = "emb:green:eth"; gpios = <&gpio0 20 1>; }; eth2 { label = "emb:red:eth"; gpios = <&gpio0 18 1>; }; wifi { label = "emb:green:wifi"; gpios = <&gpio0 17 1>; }; wifi2 { label = "emb:red:wifi"; gpios = <&gpio0 19 1>; }; }; gpio_export { compatible = "gpio-export"; #size-cells = <0>; /* gpio 12 and 13 handle the OC input */ usb0 { gpio-export,name = "usb0"; gpio-export,output = <1>; gpios = <&gpio0 2 0>; }; usb1 { gpio-export,name = "usb1"; gpio-export,output = <1>; gpios = <&gpio0 1 0>; }; }; };