/dts-v1/;

/include/ "mt7620a.dtsi"

/ {
	compatible = "ralink,mt7620a-soc";
	model = "Planex MZK-EX300NP";

	palmbus@10000000 {
		gpio1: gpio@638 {
			status = "okay";
		};

		gpio3: gpio@688 {
			status = "okay";
		};

		spi@b00 {
			status = "okay";

			m25p80@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "jedec,spi-nor";
				reg = <0 0>;
				linux,modalias = "m25p80", "w25q64";
				spi-max-frequency = <10000000>;

				partition@0 {
					label = "u-boot";
					reg = <0x0 0x30000>;
					read-only;
				};

				partition@30000 {
					label = "u-boot-env";
					reg = <0x30000 0x10000>;
					read-only;
				};

				factory: partition@40000 {
					label = "factory";
					reg = <0x40000 0x10000>;
					read-only;
				};

				partition@50000 {
					label = "firmware";
					reg = <0x50000 0x730000>;
				};

				partition@780000 {
					label = "Udata";
					reg = <0x780000 0x80000>;
				};
			};
		};
	};

	pinctrl {
		state_default: pinctrl0 {
			gpio {
				ralink,group = "i2c", "spi refclk", "rgmii1", "wled";
				ralink,function = "gpio";
			};
		};
	};

	ethernet@10100000 {
		pinctrl-names = "default";
		pinctrl-0 = <&ephy_pins>;
		mtd-mac-address = <&factory 0x4>;
		mediatek,portmap = "llllw";
	};

	wmac@10180000 {
		ralink,mtd-eeprom = <&factory 0>;
	};

	gpio-leds {
		compatible = "gpio-leds";

		wifi {
			label = "mzk-ex300np:green:wifi";
			gpios = <&gpio3 0 1>;
		};

		wps {
			label = "mzk-ex300np:green:wps";
			gpios = <&gpio1 5 1>;
		};

		rep {
			label = "mzk-ex300np:blue:rep";
			gpios = <&gpio1 4 1>;
		};

		wifi1 {
			label = "mzk-ex300np:blue:wifi1";
			gpios = <&gpio1 1 1>;
		};

		wifi2 {
			label = "mzk-ex300np:blue:wifi2";
			gpios = <&gpio1 2 1>;
		};

		wifi3 {
			label = "mzk-ex300np:blue:wifi3";
			gpios = <&gpio1 0 1>;
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;

		reset {
			label = "reset";
			gpios = <&gpio0 1 1>;
			linux,code = <0x198>;
		};

		wps {
			label = "wps";
			gpios = <&gpio1 3 0>;
			linux,code = <0x211>;
		};
	};
};