/dts-v1/; /include/ "rt5350.dtsi" / { compatible = "MPRA2", "ralink,rt5350-soc"; model = "HAME MPR-A2"; memory@0 { reg = <0x0 0x2000000>; }; palmbus@10000000 { sysc@0 { ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; ralink,gpiomux = "jtag"; ralink,uartmux = "gpio"; ralink,wdtmux = <1>; }; gpio0: gpio@600 { status = "okay"; }; spi@b00 { status = "okay"; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "s25fl064k"; reg = <0 0>; linux,modalias = "m25p80", "s25fl064k"; spi-max-frequency = <10000000>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "firmware"; reg = <0x50000 0x7b0000>; }; }; }; }; ethernet@10100000 { status = "okay"; }; esw@10110000 { status = "okay"; ralink,portmap = <0x2f>; }; wmac@10180000 { status = "okay"; }; ehci@101c0000 { status = "okay"; }; ohci@101c1000 { status = "okay"; }; gpio-leds { compatible = "gpio-leds"; system { label = "mpr-a2:blue:system"; gpios = <&gpio0 20 1>; }; power { label = "mpr-a2:red:power"; gpios = <&gpio0 17 1>; }; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; wps { label = "reset"; gpios = <&gpio0 0 1>; linux,code = <0x198>; }; }; gpio_export { compatible = "gpio-export"; #size-cells = <0>; usb { gpio-export,name = "usb"; gpio-export,output = <1>; gpios = <&gpio0 7 0>; }; root_hub { gpio-export,name = "root_hub"; gpio-export,output = <1>; gpios = <&gpio0 12 0>; }; }; };