/dts-v1/; /include/ "rt5350.dtsi" / { compatible = "A5-V11", "ralink,rt5350-soc"; model = "A5-V11"; palmbus@10000000 { spi@b00 { status = "okay"; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0 0>; linux,modalias = "m25p80", "pm25lq032"; spi-max-frequency = <10000000>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "firmware"; reg = <0x50000 0x3b0000>; }; }; }; gpio1: gpio@660 { status = "okay"; }; }; pinctrl { state_default: pinctrl0 { gpio { ralink,group = "i2c", "jtag", "uartf", "led"; ralink,function = "gpio"; }; }; }; ethernet@10100000 { mtd-mac-address = <&factory 0x4>; }; esw@10110000 { mediatek,portmap = <0x1>; mediatek,portdisable = <0x3e>; }; wmac@10180000 { ralink,mtd-eeprom = <&factory 0>; }; ehci@101c0000 { status = "okay"; }; ohci@101c1000 { status = "okay"; }; gpio-leds { compatible = "gpio-leds"; system { label = "a5-v11:blue:system"; gpios = <&gpio0 20 1>; }; power { label = "a5-v11:red:power"; gpios = <&gpio0 17 1>; }; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; reset { label = "reset"; gpios = <&gpio0 0 1>; linux,code = <0x198>; }; }; gpio_export { compatible = "gpio-export"; #size-cells = <0>; usb { gpio-export,name = "usb"; gpio-export,output = <1>; gpios = <&gpio0 7 0>; }; root_hub { gpio-export,name = "root_hub"; gpio-export,output = <1>; gpios = <&gpio0 12 0>; }; }; };