/dts-v1/;

/include/ "amazonse.dtsi"

/ {
	chosen {
		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
	};

	memory@0 {
		reg = <0x0 0x1000000>;
	};

	fpi@10000000 {
		#address-cells = <1>;
		#size-cells = <1>;

		gpio: pinmux@E100B10 {
			compatible = "lantiq,pinctrl-ase";
			pinctrl-names = "default";
			pinctrl-0 = <&state_default>;

			#gpio-cells = <2>;
			gpio-controller;
			reg = <0xE100B10 0xA0>;

			state_default: pinmux {
				spi {
					lantiq,groups = "spi", "spi_cs1";
					lantiq,function = "spi";
				};
				asc {
					lantiq,groups = "asc";
					lantiq,function = "asc";
				};
				exin {
					lantiq,groups = "exin1", "exin2";
					lantiq,function = "exin";
				};
				conf_in {
					lantiq,pins = "io0", "io29"; /* nand rdy */
					lantiq,pull = <2>;
				};
			};
		};

		adsl: dsl@E116000 {
			compatible = "lantiq,dsl-xway";
			interrupt-parent = <&icu0>;
			interrupts = <63 96>;
		};

		etop@E180000 {
			compatible = "lantiq,etop-xway";
			reg = <0xE180000 0x40000>;
			interrupt-parent = <&icu0>;
			interrupts = <105 109>;
			phy-mode = "ephy";
			mac-address = [ 00 11 22 33 44 55 ];
		};

		spi@E100800 {
			compatible = "lantiq,spi-xway";
			reg = <0xE100800 0x100>;
			interrupt-parent = <&icu0>;
			interrupts = <24 25 26>;
			#address-cells = <1>;
			#size-cells = <1>;

			m25p80@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "s25fl129p0";
				reg = <0 0>;
				linux,modalias = "m25p80", "mx25l3205d";
				spi-max-frequency = <5000000>;

				partition@0 {
					reg = <0x0 0x20000>;
					label = "SPI (RO) U-Boot Image";
					read-only;
				};
	
				partition@20000 {
					reg = <0x20000 0x10000>;
					label = "ENV_MAC";
					read-only;
				};

				partition@30000 {
					reg = <0x30000 0x10000>;
					label = "DPF";
					read-only;
				};

				partition@40000 {
					reg = <0x40000 0x10000>;
					label = "NVRAM";
					read-only;
				};

				partition@500000 {
					reg = <0x50000 0x003a0000>;
					label = "kernel";
				};
			};
		};
	};
	
	/* missing button on <&gpio 25 0> */
/*	gpio-keys {
		compatible = "gpio-keys";
		interrupt-parent = <&icu0>;
		interrupts = <30 31>;
		reset {
			label = "Reset";
			gpios = <&gpio 0 0>;
			gpio-key,wakeup;
			linux,code = <0x100>;
		};
		wps {
			label = "WPS";
			gpios = <&gpio 29 1>;
			gpio-key,wakeup;
			linux,code = <0x100>;
		};
	};
*/
	gpio-leds {
		compatible = "gpio-leds";
		festnetz {
			label = "DSL";
			gpios = <&gpio 1 1>;
			default-state = "on";
		};
		internet1 {
			label = "Internet1";
			gpios = <&gpio 2 1>;
			default-state = "on";
		};
		internet2 {
			label = "Internet2";
			gpios = <&gpio 3 1>;
			default-state = "on";
		};
		wps {
			label = "WPS";
			gpios = <&gpio 4 1>;
			default-state = "on";
		};
		power {
			label = "power";
			gpios = <&gpio 13 1>;
			default-state = "on";
		};
	};
};