/dts-v1/; /include/ "danube.dtsi" / { model = "ARV4510QW - Wippies Homebox"; chosen { bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; }; memory@0 { reg = <0x0 0x2000000>; }; sram@1F000000 { vmmc@107000 { status = "okay"; }; }; fpi@10000000 { localbus@0 { nor-boot@0 { compatible = "lantiq,nor"; bank-width = <2>; reg = <0 0x0 0x1000000>; #address-cells = <1>; #size-cells = <1>; lantiq,noxip; partition@0 { label = "uboot"; reg = <0x00000 0x20000>; read-only; }; partition@20000 { label = "uboot_env"; reg = <0x20000 0x20000>; read-only; }; partition@240000 { label = "linux"; reg = <0x40000 0xf00000>; }; partition@fe0000 { label = "boardconfig"; reg = <0xfe0000 0x10000>; read-only; }; }; mac_addr { compatible = "lantiq,eth-mac"; reg = <0 0xff0016 0x6>; mac-increment = <2>; }; }; gpio: pinmux@E100B10 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; state_default: pinmux { stp { lantiq,groups = "stp"; lantiq,function = "stp"; }; exin { lantiq,groups = "exin2"; lantiq,function = "exin"; }; pci_in { lantiq,groups = "req1", "req2"; lantiq,function = "pci"; lantiq,open-drain = <1>; lantiq,pull = <2>; lantiq,output = <0>; }; pci_out { lantiq,groups = "gnt1"; lantiq,function = "pci"; lantiq,output = <1>; }; pci_rst { lantiq,pins = "io21"; lantiq,pull = <0>; lantiq,output = <1>; }; }; }; gpios: stp@E100BB0 { status = "okay"; }; etop@E180000 { phy-mode = "rmii"; }; pci@E105400 { status = "okay"; lantiq,external-clock; interrupt-map = < 0x7000 0 0 1 &icu0 30 0x7800 0 0 1 &icu0 135 0x7800 0 0 2 &icu0 135 0x7800 0 0 3 &icu0 135 >; gpio-reset = <&gpio 21 0>; req-mask = <0x3>; }; }; };