Many of the Gateworks Ventana boards use a PLX PEX860X PCIe Switch
and utilize its GPIO outputs as PERST# for downstream ports.  This
patch configures them appropriately during enumeration.

Additionally many of the Ventana boards use CKO1 as the clock input for
an analog audio codec which is setup here.

--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -25,6 +25,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/opp.h>
+#include <linux/pci.h>
 #include <linux/phy.h>
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
@@ -145,6 +146,42 @@ static void __init imx6q_sabrelite_init(
 	imx6q_sabrelite_cko1_setup();
 }
 
+/*
+ * fixup for PEX 8909 bridge to configure GPIO1-7 as output High
+ * as they are used for slots1-7 PERST#
+ */
+static void mx6_ventana_pciesw_early_fixup(struct pci_dev *dev)
+{
+	u32 dw;
+
+	if (!of_machine_is_compatible("gw,ventana"))
+		return;
+
+	if (dev->devfn != 0)
+		return;
+
+	pci_read_config_dword(dev, 0x62c, &dw);
+	dw |= 0xaaa8; // GPIO1-7 outputs
+	pci_write_config_dword(dev, 0x62c, dw);
+
+	pci_read_config_dword(dev, 0x644, &dw);
+	dw |= 0xfe;   // GPIO1-7 output high
+	pci_write_config_dword(dev, 0x644, dw);
+
+	mdelay(100);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609,
+	mx6_ventana_pciesw_early_fixup);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606,
+	mx6_ventana_pciesw_early_fixup);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604,
+	mx6_ventana_pciesw_early_fixup);
+
+static void __init imx6q_ventana_init(void)
+{
+	imx6q_sabrelite_cko1_setup();
+}
+
 static void __init imx6q_1588_init(void)
 {
 	struct regmap *gpr;
@@ -163,6 +200,9 @@ static void __init imx6q_usb_init(void)
 
 static void __init imx6q_init_machine(void)
 {
+	if (of_machine_is_compatible("gw,ventana"))
+		imx6q_ventana_init();
+
 	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
 		imx6q_sabrelite_init();