CPU revision is: 00029007 Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. Primary data cache 4kB, 2-way, linesize 16 bytes. Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Fri Mar 25 12:39:57 CET 2005 Determined physical RAM map: memory: 02000000 @ 00000000 (usable) On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200 CPU: BCM5365 rev 1 at 200 MHz Using 100.000 MHz high precision timer. Calibrating delay loop... 199.47 BogoMIPS Memory: 30304k/32768k available (1463k kernel code, 2464k reserved, 104k data, 88k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Setting latency timer of device 01:00.0 to 64 PCI: Fixing up bus 1 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 3) is a 16550A ttyS01 at 0xb8000400 (irq = 0) is a 16550A Software Watchdog Timer: 0.05, timer margin: 60 sec loop: loaded (max 8 devices) Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 Amd/Fujitsu Extended Query Table v1.1 at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling fast programming due to code brokenness. Flash device: 0x400000 at 0x1c000000 Creating 4 MTD partitions on "Physically mapped flash": 0x00000000-0x00040000 : "pmon" 0x00040000-0x003f0000 : "linux" 0x000f0000-0x003f0000 : "rootfs" 0x003f0000-0x00400000 : "nvram" sflash: found no supported devices Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) ip_conntrack version 2.1 (256 buckets, 2048 max) - 288 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 Bridge firewalling registered 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller VFS: Mounted root (jffs2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 88k freed Algorithmics/MIPS FPU Emulator v1.5 diag boardtype: 00000000 using v2 hardware jffs2.bbc: SIZE compression mode activated. PCI: Setting latency timer of device 00:01.0 to 64 5325E phy=0 5325E VLAN programming for BCM5325E-MDIO I/F switch eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 PCI: Setting latency timer of device 01:03.0 to 64 PCI: Enabling device 01:03.0 (0004 -> 0006) eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 device eth0 entered promiscuous mode vlan0: add 01:00:5e:00:00:01 mcast address to master interface device eth1 entered promiscuous mode eth1: attempt to add interface with same source address. br0: port 2(eth1) entering listening state br0: port 1(vlan0) entering listening state br0: port 2(eth1) entering learning state br0: port 1(vlan0) entering learning state br0: port 2(eth1) entering forwarding state br0: topology change detected, propagating br0: port 1(vlan0) entering forwarding state br0: topology change detected, propagating vlan1: add 01:00:5e:00:00:01 mcast address to master interface