target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch

   1 From 3e7fc7d394db0783996519f2d5affde5152a628e Mon Sep 17 00:00:00 2001
   2 From: Chen-Yu Tsai <wens@csie.org>
   3 Date: Thu, 26 Dec 2013 17:14:33 +0800
   4 Subject: [PATCH] ARM: dts: sun7i: add WiFi module to Cubietruck DTS
   5
   6 The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The WiFi
   7 part is a BCM43362 IC connected to MMC2 in the A20 SoC via SDIO.
   8 The IC also takes a 32.768 KHz low power clock input, and a power
   9 enable signal via GPIO.
  10
  11 The WiFi module supports out-of-band interrupt signaling via GPIO,
  12 but this is not supported in this patch.
  13 ---
  14  arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 47 ++++++++++++++++++++++++++++++
  15  1 file changed, 47 insertions(+)
  16
  17 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
  18 +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
  19 @@ -28,6 +28,23 @@
  20                         status = "okay";
  21                 };
  22
  23 +               mmc3: mmc@01c12000 {
  24 +                       pinctrl-names = "default", "default";
  25 +                       pinctrl-0 = <&mmc3_pins_a>;
  26 +                       pinctrl-1 = <&wifi_host_wake_pin>;
  27 +                       vmmc-supply = <&reg_vmmc3>;
  28 +                       non-removable;
  29 +                       status = "okay";
  30 +
  31 +                       brcmf: bcrmf@0 {
  32 +                               /* out of band interrupt not working */
  33 +                               /* compatible = "broadcom,bcm43362"; */
  34 +                               interrupt-parent = <&pio>;
  35 +                               interrupts = <10 2>; /* EINT10 */
  36 +                               status = "okay";
  37 +                       };
  38 +               };
  39 +
  40                 usbphy: phy@01c13400 {
  41                         usb1_vbus-supply = <&reg_usb1_vbus>;
  42                         usb2_vbus-supply = <&reg_usb2_vbus>;
  43 @@ -56,6 +73,18 @@
  44                 };
  45
  46                 pinctrl@01c20800 {
  47 +                       mmc3_pins_a: mmc3@0 {
  48 +                               /* AP6210 requires pull-up */
  49 +                               allwinner,pull = <1>;
  50 +                       };
  51 +
  52 +                       vmmc3_pin_cubietruck: vmmc3_pin@0 {
  53 +                               allwinner,pins = "PH9";
  54 +                               allwinner,function = "gpio_out";
  55 +                               allwinner,drive = <0>;
  56 +                               allwinner,pull = <0>;
  57 +                       };
  58 +
  59                         ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
  60                                 allwinner,pins = "PH12";
  61                                 allwinner,function = "gpio_out";
  62 @@ -83,6 +112,13 @@
  63                                         allwinner,drive = <0>;
  64                                         allwinner,pull = <2>;
  65                         };
  66 +
  67 +                       wifi_host_wake_pin: wifi_host_wake_pin@0 {
  68 +                               allwinner,pins = "PH10";
  69 +                               allwinner,function = "gpio_in";
  70 +                               allwinner,drive = <0>;
  71 +                               allwinner,pull = <0>;
  72 +                       };
  73                 };
  74
  75                 uart0: serial@01c28000 {
  76 @@ -171,4 +207,15 @@
  77         reg_usb2_vbus: usb2-vbus {
  78                 status = "okay";
  79         };
  80 +
  81 +       reg_vmmc3: vmmc3 {
  82 +               compatible = "regulator-fixed";
  83 +               pinctrl-names = "default";
  84 +               pinctrl-0 = <&vmmc3_pin_cubietruck>;
  85 +               regulator-name = "vmmc3";
  86 +               regulator-min-microvolt = <3300000>;
  87 +               regulator-max-microvolt = <3300000>;
  88 +               enable-active-high;
  89 +               gpio = <&pio 7 9 0>;
  90 +       };
  91  };