target/linux/sunxi/patches-3.14/105-dt-sun4i-add-linksprite-pcduino.patch

   1 From 2fc6dcd5e7c76c203d2e174e70ef21393a231163 Mon Sep 17 00:00:00 2001
   2 From: Zoltan HERPAI <wigyori@uid0.hu>
   3 Date: Mon, 13 Jan 2014 14:15:01 +0100
   4 Subject: [PATCH] ARM: sun4i: dt: Add basic board support for LinkSprite
   5  pcDuino
   6
   7 This patch will add a basic board support DT for the
   8 LinkSprite pcDuino board.
   9
  10 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
  11 Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
  12 ---
  13  arch/arm/boot/dts/Makefile              |  1 +
  14  arch/arm/boot/dts/sun4i-a10-pcduino.dts | 48 +++++++++++++++++++++++++++++++++
  15  2 files changed, 49 insertions(+)
  16  create mode 100644 arch/arm/boot/dts/sun4i-a10-pcduino.dts
  17
  18 --- a/arch/arm/boot/dts/Makefile
  19 +++ b/arch/arm/boot/dts/Makefile
  20 @@ -284,6 +284,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
  21         sun4i-a10-cubieboard.dtb \
  22         sun4i-a10-mini-xplus.dtb \
  23         sun4i-a10-hackberry.dtb \
  24 +       sun4i-a10-pcduino.dtb \
  25         sun5i-a10s-olinuxino-micro.dtb \
  26         sun5i-a13-olinuxino.dtb \
  27         sun5i-a13-olinuxino-micro.dtb \
  28 --- /dev/null
  29 +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
  30 @@ -0,0 +1,48 @@
  31 +/*
  32 + * Copyright 2014 Zoltan HERPAI
  33 + * Zoltan HERPAI <wigyori@uid0.hu>
  34 + *
  35 + * The code contained herein is licensed under the GNU General Public
  36 + * License. You may obtain a copy of the GNU General Public License
  37 + * Version 2 or later at the following locations:
  38 + *
  39 + * http://www.opensource.org/licenses/gpl-license.html
  40 + * http://www.gnu.org/copyleft/gpl.html
  41 + */
  42 +
  43 +/dts-v1/;
  44 +/include/ "sun4i-a10.dtsi"
  45 +
  46 +/ {
  47 +       model = "LinkSprite pcDuino";
  48 +       compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
  49 +
  50 +       soc@01c00000 {
  51 +               emac: ethernet@01c0b000 {
  52 +                       pinctrl-names = "default";
  53 +                       pinctrl-0 = <&emac_pins_a>;
  54 +                       phy = <&phy1>;
  55 +                       status = "okay";
  56 +               };
  57 +
  58 +               mdio@01c0b080 {
  59 +                       status = "okay";
  60 +
  61 +                       phy1: ethernet-phy@1 {
  62 +                               reg = <1>;
  63 +                       };
  64 +               };
  65 +
  66 +               uart0: serial@01c28000 {
  67 +                       pinctrl-names = "default";
  68 +                       pinctrl-0 = <&uart0_pins_a>;
  69 +                       status = "okay";
  70 +               };
  71 +
  72 +               i2c0: i2c@01c2ac00 {
  73 +                       pinctrl-names = "default";
  74 +                       pinctrl-0 = <&i2c0_pins_a>;
  75 +                       status = "okay";
  76 +               };
  77 +       };
  78 +};