goldfish: R.I.P.
[openwrt.git] / target / linux / s3c24xx / files-2.6.30 / arch / arm / mach-s3c2442 / gta02-pm-gps.c
1 /*
2  * GPS Power Management code for the Openmoko Freerunner GSM Phone
3  *
4  * (C) 2007-2009 by Openmoko Inc.
5  * Author: Harald Welte <laforge@openmoko.org>
6  * All rights reserved.
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation
11  *
12  */
13
14 #include <linux/module.h>
15 #include <linux/init.h>
16 #include <linux/kernel.h>
17 #include <linux/delay.h>
18 #include <linux/platform_device.h>
19
20 #include <mach/hardware.h>
21 #include <mach/cpu.h>
22
23 #include <asm/mach-types.h>
24
25 #include <mach/gta02.h>
26 #include <linux/mfd/pcf50633/core.h>
27 #include <linux/mfd/pcf50633/pmic.h>
28
29 #include <linux/regulator/consumer.h>
30 #include <linux/err.h>
31
32 struct gta02_pm_gps_data {
33 #ifdef CONFIG_PM
34         int keep_on_in_suspend;
35 #endif
36         int power_was_on;
37         struct regulator *regulator;
38 };
39
40 static struct gta02_pm_gps_data gta02_gps;
41
42 int gta02_pm_gps_is_on(void)
43 {
44         return gta02_gps.power_was_on;
45 }
46 EXPORT_SYMBOL_GPL(gta02_pm_gps_is_on);
47
48 /* This is the POWERON pin */
49 static void gps_pwron_set(int on)
50 {
51         if (on) {
52                 /* return UART pins to being UART pins */
53                 s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_TXD1);
54                 /* remove pulldown now it won't be floating any more */
55                 s3c2410_gpio_pullup(S3C2410_GPH5, 0);
56
57                 if (!gta02_gps.power_was_on)
58                         regulator_enable(gta02_gps.regulator);
59         } else {
60                 /*
61                  * take care not to power unpowered GPS from UART TX
62                  * return them to GPIO and force low
63                  */
64                 s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP);
65                 s3c2410_gpio_setpin(S3C2410_GPH4, 0);
66                 /* don't let RX from unpowered GPS float */
67                 s3c2410_gpio_pullup(S3C2410_GPH5, 1);
68                 if (gta02_gps.power_was_on)
69                         regulator_disable(gta02_gps.regulator);
70         }
71 }
72
73 static int gps_pwron_get(void)
74 {
75         return regulator_is_enabled(gta02_gps.regulator);
76 }
77
78 #ifdef CONFIG_PM
79 /* This is the flag for keeping gps ON during suspend */
80 static void gps_keep_on_in_suspend_set(int on)
81 {
82         gta02_gps.keep_on_in_suspend = on;
83 }
84
85 static int gps_keep_on_in_suspend_get(void)
86 {
87         return gta02_gps.keep_on_in_suspend;
88 }
89 #endif
90
91 static ssize_t power_gps_read(struct device *dev,
92                               struct device_attribute *attr, char *buf)
93 {
94         int ret = 0;
95
96         if (!strcmp(attr->attr.name, "power_on") ||
97             !strcmp(attr->attr.name, "pwron")) {
98                 ret = gps_pwron_get();
99 #ifdef CONFIG_PM
100         } else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
101                 ret = gps_keep_on_in_suspend_get();
102 #endif
103         }
104         if (ret)
105                 return strlcpy(buf, "1\n", 3);
106         else
107                 return strlcpy(buf, "0\n", 3);
108 }
109
110 static ssize_t power_gps_write(struct device *dev,
111                                struct device_attribute *attr, const char *buf,
112                                size_t count)
113 {
114         unsigned long on = simple_strtoul(buf, NULL, 10);
115
116         if (!strcmp(attr->attr.name, "power_on") ||
117             !strcmp(attr->attr.name, "pwron")) {
118                 gps_pwron_set(on);
119                 gta02_gps.power_was_on = !!on;
120 #ifdef CONFIG_PM
121         } else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
122                 gps_keep_on_in_suspend_set(on);
123 #endif
124         }
125         return count;
126 }
127
128 #ifdef CONFIG_PM
129 static int gta02_pm_gps_suspend(struct platform_device *pdev,
130                                 pm_message_t state)
131 {
132         if (!gta02_gps.keep_on_in_suspend ||
133                 !gta02_gps.power_was_on)
134                 gps_pwron_set(0);
135         else
136                 dev_warn(&pdev->dev, "GTA02: keeping gps ON "
137                          "during suspend\n");
138         return 0;
139 }
140
141 static int gta02_pm_gps_resume(struct platform_device *pdev)
142 {
143         if (!gta02_gps.keep_on_in_suspend && gta02_gps.power_was_on)
144                 gps_pwron_set(1);
145
146         return 0;
147 }
148
149 static DEVICE_ATTR(keep_on_in_suspend, 0644, power_gps_read, power_gps_write);
150 #else
151 #define gta02_pm_gps_suspend    NULL
152 #define gta02_pm_gps_resume     NULL
153 #endif
154
155 static DEVICE_ATTR(power_on, 0644, power_gps_read, power_gps_write);
156
157 static struct attribute *gta02_gps_sysfs_entries[] = {
158         &dev_attr_power_on.attr,
159 #ifdef CONFIG_PM
160         &dev_attr_keep_on_in_suspend.attr,
161 #endif
162         NULL
163 };
164
165 static struct attribute_group gta02_gps_attr_group = {
166         .name   = NULL,
167         .attrs  = gta02_gps_sysfs_entries,
168 };
169
170 static int __init gta02_pm_gps_probe(struct platform_device *pdev)
171 {
172         gta02_gps.regulator = regulator_get(&pdev->dev, "RF_3V");
173         if (IS_ERR(gta02_gps.regulator)) {
174                 dev_err(&pdev->dev, "probe failed %ld\n",
175                         PTR_ERR(gta02_gps.regulator));
176
177                 return PTR_ERR(gta02_gps.regulator);
178         }
179
180         dev_info(&pdev->dev, "starting\n");
181
182         /*
183          * Here we should call the code that handles the set GPS power
184          * off action.  But, the regulator API does not allow us to
185          * reassert regulator state, and when we read the regulator API
186          * logical state, it can differ from the actual state,  So
187          * a workaround for this is to just set the regulator off in the
188          * PMU directly.  Because that's different from normal flow, we
189          * have to reproduce other things from the OFF action here too.
190          */
191
192         /*
193          * u-boot enables LDO5 (GPS), which doesn't make sense and
194          * causes confusion. We therefore disable the regulator here.
195          */
196         pcf50633_reg_write(gta02_pcf, PCF50633_REG_LDO5ENA, 0);
197
198         /*
199          * take care not to power unpowered GPS from UART TX
200          * return them to GPIO and force low
201          */
202         s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP);
203         s3c2410_gpio_setpin(S3C2410_GPH4, 0);
204         /* don't let RX from unpowered GPS float */
205         s3c2410_gpio_pullup(S3C2410_GPH5, 1);
206
207         return sysfs_create_group(&pdev->dev.kobj,
208                                   &gta02_gps_attr_group);
209 }
210
211 static int gta02_pm_gps_remove(struct platform_device *pdev)
212 {
213         regulator_put(gta02_gps.regulator);
214         sysfs_remove_group(&pdev->dev.kobj, &gta02_gps_attr_group);
215         return 0;
216 }
217
218 static struct platform_driver gta02_pm_gps_driver = {
219         .probe          = gta02_pm_gps_probe,
220         .remove         = gta02_pm_gps_remove,
221         .suspend        = gta02_pm_gps_suspend,
222         .resume         = gta02_pm_gps_resume,
223         .driver         = {
224                 .name           = "gta02-pm-gps",
225         },
226 };
227
228 static int __devinit gta02_pm_gps_init(void)
229 {
230         return platform_driver_register(&gta02_pm_gps_driver);
231 }
232
233 static void gta02_pm_gps_exit(void)
234 {
235         platform_driver_unregister(&gta02_pm_gps_driver);
236 }
237
238 module_init(gta02_pm_gps_init);
239 module_exit(gta02_pm_gps_exit);
240
241 MODULE_LICENSE("GPL");
242 MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");