br2684ctl: add atm-bridge disabled option
[openwrt.git] / target / linux / ramips / patches-3.18 / 0044-mtd-add-chunked-read-io-to-m25p80.patch
1 --- a/drivers/mtd/devices/m25p80.c
2 +++ b/drivers/mtd/devices/m25p80.c
3 @@ -19,6 +19,7 @@
4  #include <linux/errno.h>
5  #include <linux/module.h>
6  #include <linux/device.h>
7 +#include <linux/of.h>
8  
9  #include <linux/mtd/mtd.h>
10  #include <linux/mtd/partitions.h>
11 @@ -32,6 +33,7 @@ struct m25p {
12         struct spi_device       *spi;
13         struct spi_nor          spi_nor;
14         struct mtd_info         mtd;
15 +       u16                     chunk_size;
16         u8                      command[MAX_CMD_SIZE];
17  };
18  
19 @@ -117,25 +119,14 @@ static inline unsigned int m25p80_rx_nbi
20         }
21  }
22  
23 -/*
24 - * Read an address range from the nor chip.  The address range
25 - * may be any size provided it is within the physical boundaries.
26 - */
27 -static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
28 -                       size_t *retlen, u_char *buf)
29 +static int __m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
30 +                        size_t *retlen, u_char *buf)
31  {
32         struct m25p *flash = nor->priv;
33         struct spi_device *spi = flash->spi;
34         struct spi_transfer t[2];
35         struct spi_message m;
36         int dummy = nor->read_dummy;
37 -       int ret;
38 -
39 -       /* Wait till previous write/erase is done. */
40 -       ret = nor->wait_till_ready(nor);
41 -       if (ret)
42 -               return ret;
43 -
44         spi_message_init(&m);
45         memset(t, 0, (sizeof t));
46  
47 @@ -156,6 +147,84 @@ static int m25p80_read(struct spi_nor *n
48         *retlen = m.actual_length - m25p_cmdsz(nor) - dummy;
49         return 0;
50  }
51 +/*
52 + * Read an address range from the nor chip.  The address range
53 + * may be any size provided it is within the physical boundaries.
54 + */
55 +static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
56 +                       size_t *retlen, u_char *buf)
57 +{
58 +       int ret;
59 +
60 +       /* Wait till previous write/erase is done. */
61 +       ret = nor->wait_till_ready(nor);
62 +       if (ret)
63 +               return ret;
64 +
65 +       return __m25p80_read(nor, from, len, retlen, buf);
66 +}
67 +
68 +
69 +static void m25p80_chunked_write(struct spi_nor *nor, loff_t _from, size_t _len,
70 +                       size_t *_retlen, const u_char *_buf)
71 +{
72 +       struct m25p *flash = nor->priv;
73 +       int chunk_size;
74 +       int retlen = 0;
75 +
76 +       chunk_size = flash->chunk_size;
77 +       if (!chunk_size)
78 +               chunk_size = _len;
79 +
80 +       if (nor->addr_width > 3)
81 +               chunk_size -= nor->addr_width - 3;
82 +
83 +       while (retlen < _len) {
84 +               size_t len = min_t(int, chunk_size, _len - retlen);
85 +               const u_char *buf = _buf + retlen;
86 +               loff_t from = _from + retlen;
87 +
88 +               nor->wait_till_ready(nor);
89 +               nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
90 +
91 +               m25p80_write(nor, from, len, &retlen, buf);
92 +       }
93 +       *_retlen += retlen;
94 +}
95 +
96 +static int m25p80_chunked_read(struct spi_nor *nor, loff_t _from, size_t _len,
97 +                       size_t *_retlen, u_char *_buf)
98 +{
99 +       struct m25p *flash = nor->priv;
100 +       int chunk_size;
101 +       int ret;
102 +
103 +       /* Wait till previous write/erase is done. */
104 +       ret = nor->wait_till_ready(nor);
105 +       if (ret)
106 +               return ret;
107 +
108 +       chunk_size = flash->chunk_size;
109 +       if (!chunk_size)
110 +               chunk_size = _len;
111 +
112 +       *_retlen = 0;
113 +
114 +       while (*_retlen < _len) {
115 +               size_t len = min_t(int, chunk_size, _len - *_retlen);
116 +               u_char *buf = _buf + *_retlen;
117 +               loff_t from = _from + *_retlen;
118 +               int retlen = 0;
119 +               int ret = __m25p80_read(nor, from, len, &retlen, buf);
120 +
121 +               if (ret)
122 +                       return ret;
123 +
124 +               *_retlen += retlen;
125 +       }
126 +
127 +       return 0;
128 +}
129  
130  static int m25p80_erase(struct spi_nor *nor, loff_t offset)
131  {
132 @@ -197,6 +266,7 @@ static int m25p_probe(struct spi_device
133         struct spi_nor *nor;
134         enum read_mode mode = SPI_NOR_NORMAL;
135         char *flash_name = NULL;
136 +       u32 val;
137         int ret;
138  
139         data = dev_get_platdata(&spi->dev);
140 @@ -244,6 +314,14 @@ static int m25p_probe(struct spi_device
141         if (ret)
142                 return ret;
143  
144 +       if (spi->dev.of_node &&
145 +           !of_property_read_u32(spi->dev.of_node, "m25p,chunked-io", &val)) {
146 +               dev_warn(&spi->dev, "using chunked io\n");
147 +               nor->read = m25p80_chunked_read;
148 +               nor->write = m25p80_chunked_write;
149 +               flash->chunk_size = val;
150 +       }
151 +
152         ppdata.of_node = spi->dev.of_node;
153  
154         return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,