target/linux/ramips/dts/XDXRN502J.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "XDXRN502J", "ralink,rt3052-soc";
   7         model = "XDX RN502J";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
  12                         ralink,gpiomux = "mdio";
  13                         ralink,uartmux = "gpio";
  14                         ralink,wdtmux = <1>;
  15                 };
  16
  17                 gpio0: gpio@600 {
  18                         status = "okay";
  19                 };
  20         };
  21
  22         cfi@1f000000 {
  23                 compatible = "cfi-flash";
  24                 reg = <0x1f000000 0x800000>;
  25
  26                 bank-width = <2>;
  27                 device-width = <2>;
  28                 #address-cells = <1>;
  29                 #size-cells = <1>;
  30
  31                 partition@0 {
  32                         label = "u-boot";
  33                         reg = <0x0 0x30000>;
  34                         read-only;
  35                 };
  36
  37                 partition@30000 {
  38                         label = "u-boot-env";
  39                         reg = <0x30000 0x10000>;
  40                         read-only;
  41                 };
  42
  43                 factory: partition@40000 {
  44                         label = "factory";
  45                         reg = <0x40000 0x10000>;
  46                         read-only;
  47                 };
  48
  49                 partition@50000 {
  50                         label = "firmware";
  51                         reg = <0x50000 0x3b0000>;
  52                 };
  53         };
  54
  55         ethernet@10100000 {
  56                 status = "okay";
  57         };
  58
  59         esw@10110000 {
  60                 status = "okay";
  61                 ralink,portmap = <0x3e>;
  62         };
  63
  64         gpio-leds {
  65                 compatible = "gpio-leds";
  66                 wifi {
  67                         label = "xdxrn502j:green:wifi";
  68                         gpios = <&gpio0 7 1>;
  69                 };
  70                 power {
  71                         label = "xdxrn502j:green:power";
  72                         gpios = <&gpio0 9 1>;
  73                 };
  74         };
  75
  76         gpio-keys-polled {
  77                 compatible = "gpio-keys-polled";
  78                 #address-cells = <1>;
  79                 #size-cells = <0>;
  80                 poll-interval = <20>;
  81                 reset {
  82                         label = "reset";
  83                         gpios = <&gpio0 12 1>;
  84                         linux,code = <0x198>;
  85                 };
  86         };
  87
  88         wmac@10180000 {
  89                 status = "okay";
  90         };
  91
  92         otg@101c0000 {
  93                 status = "okay";
  94         };
  95 };