target/linux/ramips/dts/WZR-AGL300NH.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "WZR-AGL300NH", "ralink,rt2880-soc";
   9         model = "Buffalo WZR-AGL300NH";
  10
  11         palmbus@300000 {
  12                 gpio0: gpio@600 {
  13                         status = "okay";
  14                 };
  15         };
  16
  17         pinctrl {
  18                 state_default: pinctrl0 {
  19                         gpio {
  20                                 ralink,group = "i2c", "uartlite", "mdio";
  21                                 ralink,function = "gpio";
  22                         };
  23                 };
  24         };
  25
  26         cfi@1f000000 {
  27                 compatible = "cfi-flash";
  28                 reg = <0x1f000000 0x800000>;
  29                 bank-width = <2>;
  30                 device-width = <2>;
  31                 #address-cells = <1>;
  32                 #size-cells = <1>;
  33
  34                 partition@0 {
  35                         label = "uboot";
  36                         reg = <0x0 0x30000>;
  37                         read-only;
  38                 };
  39
  40                 partition@30000 {
  41                         label = "uboot-env";
  42                         reg = <0x30000 0x10000>;
  43                         read-only;
  44                 };
  45
  46                 factory: partition@40000 {
  47                         label = "factory";
  48                         reg = <0x40000 0x10000>;
  49                         read-only;
  50                 };
  51
  52                 partition@50000 {
  53                         label = "firmware";
  54                         reg = <0x50000 0x3b0000>;
  55                 };
  56         };
  57
  58         ethernet@400000 {
  59                 status = "okay";
  60                 mtd-mac-address = <&factory 0x4>;
  61
  62                 port@0 {
  63                         mediatek,fixed-link = <1000 1 1 1>;
  64                 };
  65
  66                 mdio-bus {
  67                         status = "okay";
  68
  69                         phy0: ethernet-phy@0 {
  70                                 phy-mode = "mii";
  71                                 reg = <0>;
  72                         };
  73                 };
  74         };
  75
  76         rtl8366s {
  77                 compatible = "realtek,rtl8366s";
  78                 gpio-sda = <&gpio0 1 0>;
  79                 gpio-sck = <&gpio0 2 0>;
  80         };
  81
  82         wmac@480000 {
  83                 ralink,mtd-eeprom = <&factory 0>;
  84         };
  85
  86         gpio-keys-polled {
  87                 compatible = "gpio-keys-polled";
  88                 #address-cells = <1>;
  89                 #size-cells = <0>;
  90                 poll-interval = <100>;
  91
  92                 wps {
  93                         label = "wps";
  94                         gpios = <&gpio0 0 1>;
  95                         linux,code = <0x211>;
  96                 };
  97
  98                 router {
  99                         label = "router_switch";
 100                         gpios = <&gpio0 7 0>;
 101                         linux,code = <0x100>;
 102                 };
 103
 104                 reset {
 105                         label = "reset";
 106                         gpios = <&gpio0 9 1>;
 107                         linux,code = <0x198>;
 108                 };
 109         };
 110
 111         gpio-leds {
 112                 compatible = "gpio-leds";
 113
 114                 router {
 115                         label = "wzr-agl300nh:green:router";
 116                         gpios = <&gpio0 8 1>;
 117                 };
 118
 119                 diag {
 120                         label = "wzr-agl300nh:red:diag";
 121                         gpios = <&gpio0 12 1>;
 122                 };
 123
 124                 security_g {
 125                         label = "wzr-agl300nh:orange:security_g";
 126                         gpios = <&gpio0 11 1>;
 127                 };
 128
 129                 security_n {
 130                         label = "wzr-agl300nh:orange:security_n";
 131                         gpios = <&gpio0 13 1>;
 132                 };
 133         };
 134
 135
 136         pcibus0: pci@00440000 {
 137                 compatible = "ralink,rt288x-pci";
 138                 reg = <0x00440000 0x20000>;
 139                 #address-cells = <1>;
 140                 #size-cells = <1>;
 141                 status = "ok";
 142         };
 143 };