[ramips] move memory detect node to dtsi files
[openwrt.git] / target / linux / ramips / dts / WR512-3GN-4M.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6         compatible = "WR512-3GN", "ralink,rt3052-soc";
7         model = "WR512-3GN-like router";
8
9         palmbus@10000000 {
10                 sysc@0 {
11                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
12                         ralink,gpiomux = "mdio";
13                         ralink,uartmux = "gpio";
14                         ralink,wdtmux = <1>;
15                 };
16
17                 gpio0: gpio@600 {
18                         status = "okay";
19                 };
20         };
21
22         cfi@1f000000 {
23                 compatible = "cfi-flash";
24                 reg = <0x1f000000 0x800000>;
25
26                 bank-width = <2>;
27                 device-width = <2>;
28                 #address-cells = <1>;
29                 #size-cells = <1>;
30
31                 partition@0 {
32                         label = "u-boot";
33                         reg = <0x0 0x30000>;
34                         read-only;
35                 };
36
37                 partition@30000 {
38                         label = "u-boot-env";
39                         reg = <0x30000 0x10000>;
40                         read-only;
41                 };
42
43                 factory: partition@40000 {
44                         label = "factory";
45                         reg = <0x40000 0x10000>;
46                         read-only;
47                 };
48
49                 partition@50000 {
50                         label = "firmware";
51                         reg = <0x50000 0x3c8000>;
52                 };
53         };
54
55         ethernet@10100000 {
56                 status = "okay";
57         };
58
59         esw@10110000 {
60                 status = "okay";
61                 ralink,portmap = <0x2f>;
62         };
63
64         gpio-leds {
65                 compatible = "gpio-leds";
66                 3g {
67                         label = "wr512:green:3g";
68                         gpios = <&gpio0 9 1>;
69                 };
70                 gateway {
71                         label = "wr512:green:gateway";
72                         gpios = <&gpio0 11 1>;
73                 };
74                 ap {
75                         label = "wr512:green:ap";
76                         gpios = <&gpio0 12 1>;
77                 };
78                 wps {
79                         label = "wr512:green:wps";
80                         gpios = <&gpio0 14 1>;
81                 };
82                 station {
83                         label = "wr512:green:station";
84                         gpios = <&gpio0 13 1>;
85                 };
86         };
87
88         gpio-keys-polled {
89                 compatible = "gpio-keys-polled";
90                 #address-cells = <1>;
91                 #size-cells = <0>;
92                 poll-interval = <20>;
93                 reset_wps {
94                         label = "reset_wps";
95                         gpios = <&gpio0 10 1>;
96                         linux,code = <0x198>;
97                 };
98                 mode {
99                         label = "mode";
100                         gpios = <&gpio0 7 1>;
101                         linux,code = <0x32>;
102                 };
103         };
104
105         wmac@10180000 {
106                 status = "okay";
107         };
108
109         otg@101c0000 {
110                 status = "okay";
111         };
112 };