ramips: Change all '/include/' clauses to '#include' so preprocessing can be done...
[openwrt.git] / target / linux / ramips / dts / WNCE2001.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 / {
6         compatible = "WNCE2001", "ralink,rt3052-soc";
7         model = "Netgear WNCE2001";
8
9         chosen {
10                 bootargs = "console=ttyS0,115200";
11         };
12
13         palmbus@10000000 {
14                 spi@b00 {
15                         status = "okay";
16
17                         m25p80@0 {
18                                 #address-cells = <1>;
19                                 #size-cells = <1>;
20                                 compatible = "jedec,spi-nor";
21                                 reg = <0 0>;
22                                 linux,modalias = "m25p80", "mx25l3205d";
23                                 spi-max-frequency = <10000000>;
24
25                                 partition@0 {
26                                         label = "u-boot";
27                                         reg = <0x0 0x30000>;
28                                         read-only;
29                                 };
30
31                                 factory: partition@30000 {
32                                         label = "factory";
33                                         reg = <0x30000 0x10000>;
34                                         read-only;
35                                 };
36
37                                 partition@40000 {
38                                         label = "config";
39                                         reg = <0x40000 0x20000>;
40                                         read-only;
41                                 };
42
43                                 partition@60000 {
44                                         label = "language";
45                                         reg = <0x60000 0x30000>;
46                                         read-only;
47                                 };
48
49                                 partition@90000 {
50                                         label = "pot";
51                                         reg = <0x90000 0x10000>;
52                                         read-only;
53                                 };
54
55                                 partition@a0000 {
56                                         label = "checksum";
57                                         reg = <0xa0000 0x10000>;
58                                 };
59
60                                 partition@b0000 {
61                                         label = "firmware";
62                                         reg = <0xb0000 0x350000>;
63                                 };
64                         };
65                 };
66         };
67
68         pinctrl {
69                 state_default: pinctrl0 {
70                         gpio {
71                                 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
72                                 ralink,function = "gpio";
73                         };
74                 };
75         };
76
77         ethernet@10100000 {
78                 mtd-mac-address = <&factory 0x28>;
79         };
80
81         wmac@10180000 {
82                 ralink,mtd-eeprom = <&factory 0>;
83         };
84
85         gpio-leds {
86                 compatible = "gpio-leds";
87
88                 power-green {
89                         label = "wnce2001:green:power";
90                         gpios = <&gpio0 8 1>;
91                 };
92
93                 power-red {
94                         label = "wnce2001:red:power";
95                         gpios = <&gpio0 9 1>;
96                 };
97
98                 wlan-green {
99                         label = "wnce2001:green:wlan";
100                         gpios = <&gpio0 12 0>;
101                 };
102
103                 wlan-red {
104                         label = "wnce2001:red:wlan";
105                         gpios = <&gpio0 13 0>;
106                 };
107         };
108
109         gpio-keys-polled {
110                 compatible = "gpio-keys-polled";
111                 #address-cells = <1>;
112                 #size-cells = <0>;
113                 poll-interval = <20>;
114
115                 reset {
116                         label = "reset";
117                         gpios = <&gpio0 10 1>;
118                         linux,code = <0x198>;
119                 };
120
121                 wps {
122                         label = "wps";
123                         gpios = <&gpio0 0 1>;
124                         linux,code = <0x211>;
125                 };
126
127                 rt {
128                         label = "rt";
129                         gpios = <&gpio0 11 1>;
130                         linux,code = <0x100>;
131                 };
132
133                 ap {
134                         label = "ap";
135                         gpios = <&gpio0 7 1>;
136                         linux,code = <0x101>;
137                 };
138         };
139 };