target/linux/ramips/dts/WL341V3.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WL341V3", "ralink,rt3052-soc";
   7         model = "Sitecom WL-341 v3";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         chosen {
  14                 bootargs = "mtdparts=1f000000.cfi:128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,3776k@0x40000(firmware)";
  15         };
  16
  17         palmbus@10000000 {
  18                 sysc@0 {
  19                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  20                         ralink,uartmux = "gpio";
  21                         ralink,wdtmux = <1>;
  22                 };
  23
  24                 gpio0: gpio@600 {
  25                         status = "okay";
  26                 };
  27         };
  28
  29         cfi@1f000000 {
  30                 compatible = "cfi-flash";
  31                 reg = <0x1f000000 0x800000>;
  32
  33                 bank-width = <2>;
  34                 device-width = <2>;
  35                 #address-cells = <1>;
  36                 #size-cells = <1>;
  37
  38                 partition@0 {
  39                         label = "u-boot";
  40                         reg = <0x0 0x20000>;
  41                         read-only;
  42                 };
  43
  44                 partition@20000 {
  45                         label = "board-nvram";
  46                         reg = <0x20000 0x10000>;
  47                         read-only;
  48                 };
  49
  50                 partition@30000 {
  51                         label = "u-boot-env";
  52                         reg = <0x30000 0x10000>;
  53                         read-only;
  54                 };
  55
  56                 partition@40000 {
  57                         label = "firmware";
  58                         reg = <0x40000 0x3b0000>;
  59                 };
  60         };
  61
  62         ethernet@10100000 {
  63                 status = "okay";
  64         };
  65
  66         esw@10110000 {
  67                 status = "okay";
  68                 ralink,portmap = <0x3e>;
  69         };
  70
  71         gpio-leds {
  72                 compatible = "gpio-leds";
  73                 first {
  74                         label = "wl341v3:amber:first";
  75                         gpios = <&gpio0 9 1>;
  76                 };
  77                 first2 {
  78                         label = "wl341v3:blue:first";
  79                         gpios = <&gpio0 13 1>;
  80                 };
  81                 third {
  82                         label = "wl341v3:amber:third";
  83                         gpios = <&gpio0 11 1>;
  84                 };
  85                 third2 {
  86                         label = "wl341v3:blue:third";
  87                         gpios = <&gpio0 14 1>;
  88                 };
  89                 fourth {
  90                         label = "wl341v3:blue:fourth";
  91                         gpios = <&gpio0 10 1>;
  92                 };
  93                 fifth {
  94                         label = "wl341v3:amber:fifth";
  95                         gpios = <&gpio0 12 1>;
  96                 };
  97                 fifth2 {
  98                         label = "wl341v3:blue:fifth";
  99                         gpios = <&gpio0 8 1>;
 100                 };
 101         };
 102
 103         gpio-keys-polled {
 104                 compatible = "gpio-keys-polled";
 105                 #address-cells = <1>;
 106                 #size-cells = <0>;
 107                 poll-interval = <20>;
 108                 reset {
 109                         label = "reset";
 110                         gpios = <&gpio0 7 1>;
 111                         linux,code = <0x198>;
 112                 };
 113                 wps {
 114                         label = "wps";
 115                         gpios = <&gpio0 5 1>;
 116                         linux,code = <0x211>;
 117                 };
 118         };
 119
 120         wmac@10180000 {
 121                 status = "okay";
 122         };
 123
 124         otg@101c0000 {
 125                 status = "okay";
 126         };
 127 };