target/linux/ramips/dts/WL-351.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "WL-351", "ralink,rt3052-soc";
   9         model = "Sitecom WL-351 v1 002";
  10
  11         memorydetect {
  12                 ralink,memory = <0x0 0x200000 0x4000000>;
  13         };
  14
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
  18         };
  19
  20         palmbus@10000000 {
  21                 sysc@0 {
  22                         ralink,pinmmux = "uartlite", "jtag", "sdram", "rgmii";
  23                         ralink,gpiommux = "i2c", "spi", "mdio";
  24                         ralink,uartmux = "gpio";
  25                         ralink,wdtmux = <1>;
  26                 };
  27
  28                 gpio0: gpio@600 {
  29                         status = "okay";
  30                 };
  31
  32         };
  33
  34         cfi@1f000000 {
  35                 compatible = "cfi-flash";
  36                 reg = <0x1f000000 0x800000>;
  37
  38                 bank-width = <2>;
  39                 device-width = <2>;
  40                 #address-cells = <1>;
  41                 #size-cells = <1>;
  42         };
  43
  44         ethernet@10100000 {
  45                 status = "okay";
  46         };
  47
  48         esw@10110000 {
  49                 status = "okay";
  50                 ralink,portmap = <0x3f>;
  51                 ralink,fct2 = <0x0002500c>;
  52                 /*
  53                  * ext phy base addr 31, rx/tx clock skew 0,
  54                  * turbo mii off, rgmi 3.3v off, port 5 polling off
  55                  * port5: enabled, gige, full-duplex, rx/tx-flow-control
  56                  * port6: enabled, gige, full-duplex, rx/tx-flow-control
  57                 */
  58                 ralink,fpa2 = <0x1f003fff>;
  59         };
  60
  61         wmac@10180000 {
  62                 status = "okay";
  63         };
  64
  65         otg@101c0000 {
  66                 status = "okay";
  67         };
  68
  69         gpio-leds {
  70                 compatible = "gpio-leds";
  71                 power {
  72                         label = "wl-351:amber:power";
  73                         gpio = <&gpio0 8 1>;
  74                 };
  75                 unpopulated {
  76                         label = "wl-351:amber:unpopulated";
  77                         gpio = <&gpio0 12 1>;
  78                 };
  79                 unpopulated2 {
  80                         label = "wl-351:blue:unpopulated";
  81                         gpio = <&gpio0 13 1>;
  82                 };
  83         };
  84
  85         gpio-keys-polled {
  86                 compatible = "gpio-keys-polled";
  87                 #address-cells = <1>;
  88                 #size-cells = <0>;
  89                 poll-interval = <20>;
  90                 reset {
  91                         label = "reset";
  92                         gpio = <&gpio0 10 1>;
  93                         linux,code = <0x198>;
  94                 };
  95                 wps {
  96                         label = "wps";
  97                         gpio = <&gpio0 0 1>;
  98                         linux,code = <0x211>;
  99                 };
 100         };
 101
 102         rtl8366rb {
 103                 compatible = "rtl8367rb";
 104                 gpio-sda = <&gpio0 1 0>;
 105                 gpio-sck = <&gpio0 2 0>;
 106         };
 107 };