target/linux/ramips/dts/WL-351.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WL-351", "ralink,rt3052-soc";
   7         model = "Sitecom WL-351 v1 002";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
  16         };
  17
  18         palmbus@10000000 {
  19                 sysc@0 {
  20                         ralink,pinmux = "uartlite", "jtag", "sdram", "rgmii";
  21                         ralink,gpiomux = "i2c", "spi", "mdio";
  22                         ralink,uartmux = "gpio";
  23                         ralink,wdtmux = <1>;
  24                 };
  25
  26                 gpio0: gpio@600 {
  27                         status = "okay";
  28                 };
  29
  30         };
  31
  32         cfi@1f000000 {
  33                 compatible = "cfi-flash";
  34                 reg = <0x1f000000 0x800000>;
  35
  36                 bank-width = <2>;
  37                 device-width = <2>;
  38                 #address-cells = <1>;
  39                 #size-cells = <1>;
  40
  41                 partition@0 {
  42                         label = "u-boot";
  43                         reg = <0x0 0x30000>;
  44                         read-only;
  45                 };
  46
  47                 partition@30000 {
  48                         label = "u-boot-env";
  49                         reg = <0x30000 0x10000>;
  50                         read-only;
  51                 };
  52
  53                 factory: partition@40000 {
  54                         label = "factory";
  55                         reg = <0x40000 0x10000>;
  56                         read-only;
  57                 };
  58
  59                 partition@50000 {
  60                         label = "firmware";
  61                         reg = <0x50000 0x3b0000>;
  62                 };
  63         };
  64
  65         ethernet@10100000 {
  66                 status = "okay";
  67         };
  68
  69         esw@10110000 {
  70                 status = "okay";
  71                 ralink,portmap = <0x3f>;
  72                 ralink,fct2 = <0x0002500c>;
  73                 /*
  74                  * ext phy base addr 31, rx/tx clock skew 0,
  75                  * turbo mii off, rgmi 3.3v off, port 5 polling off
  76                  * port5: enabled, gige, full-duplex, rx/tx-flow-control
  77                  * port6: enabled, gige, full-duplex, rx/tx-flow-control
  78                 */
  79                 ralink,fpa2 = <0x1f003fff>;
  80         };
  81
  82         wmac@10180000 {
  83                 status = "okay";
  84         };
  85
  86         otg@101c0000 {
  87                 status = "okay";
  88         };
  89
  90         gpio-leds {
  91                 compatible = "gpio-leds";
  92                 power {
  93                         label = "wl-351:amber:power";
  94                         gpios = <&gpio0 8 1>;
  95                 };
  96                 unpopulated {
  97                         label = "wl-351:amber:unpopulated";
  98                         gpios = <&gpio0 12 1>;
  99                 };
 100                 unpopulated2 {
 101                         label = "wl-351:blue:unpopulated";
 102                         gpios = <&gpio0 13 1>;
 103                 };
 104         };
 105
 106         gpio-keys-polled {
 107                 compatible = "gpio-keys-polled";
 108                 #address-cells = <1>;
 109                 #size-cells = <0>;
 110                 poll-interval = <20>;
 111                 reset {
 112                         label = "reset";
 113                         gpios = <&gpio0 10 1>;
 114                         linux,code = <0x198>;
 115                 };
 116                 wps {
 117                         label = "wps";
 118                         gpios = <&gpio0 0 1>;
 119                         linux,code = <0x211>;
 120                 };
 121         };
 122
 123         rtl8366rb {
 124                 compatible = "rtl8367rb";
 125                 gpio-sda = <&gpio0 1 0>;
 126                 gpio-sck = <&gpio0 2 0>;
 127         };
 128 };