target/linux/ramips/dts/WL-341V3.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WL-341V3", "ralink,rt3052-soc";
   7         model = "Sitecom WL-341 v3";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12                 bank-width = <2>;
  13                 device-width = <2>;
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16
  17                 partition@0 {
  18                         label = "u-boot";
  19                         reg = <0x0 0x20000>;
  20                         read-only;
  21                 };
  22
  23                 boardnvram: partition@20000 {
  24                         label = "board-nvram";
  25                         reg = <0x20000 0x10000>;
  26                         read-only;
  27                 };
  28
  29                 partition@30000 {
  30                         label = "u-boot-env";
  31                         reg = <0x30000 0x10000>;
  32                         read-only;
  33                 };
  34
  35                 partition@40000 {
  36                         label = "firmware";
  37                         reg = <0x40000 0x3b0000>;
  38                 };
  39         };
  40
  41         pinctrl {
  42                 state_default: pinctrl0 {
  43                         gpio {
  44                                 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  45                                 ralink,function = "gpio";
  46                         };
  47                 };
  48         };
  49
  50         ethernet@10100000 {
  51                 mtd-mac-address = <&boardnvram 0xffa0>;
  52         };
  53
  54         esw@10110000 {
  55                 mediatek,portmap = <0x3e>;
  56         };
  57
  58         wmac@10180000 {
  59                 ralink,mtd-eeprom = <&boardnvram 0xfd70>;
  60         };
  61
  62         gpio-leds {
  63                 compatible = "gpio-leds";
  64
  65                 first {
  66                         label = "wl-341v3:amber:first";
  67                         gpios = <&gpio0 9 1>;
  68                 };
  69
  70                 first2 {
  71                         label = "wl-341v3:blue:first";
  72                         gpios = <&gpio0 13 1>;
  73                 };
  74
  75                 third {
  76                         label = "wl-341v3:amber:third";
  77                         gpios = <&gpio0 11 1>;
  78                 };
  79
  80                 third2 {
  81                         label = "wl-341v3:blue:third";
  82                         gpios = <&gpio0 14 1>;
  83                 };
  84
  85                 fourth {
  86                         label = "wl-341v3:blue:fourth";
  87                         gpios = <&gpio0 10 1>;
  88                 };
  89
  90                 fifth {
  91                         label = "wl-341v3:amber:fifth";
  92                         gpios = <&gpio0 12 1>;
  93                 };
  94
  95                 fifth2 {
  96                         label = "wl-341v3:blue:fifth";
  97                         gpios = <&gpio0 8 1>;
  98                 };
  99         };
 100
 101         gpio-keys-polled {
 102                 compatible = "gpio-keys-polled";
 103                 #address-cells = <1>;
 104                 #size-cells = <0>;
 105                 poll-interval = <20>;
 106
 107                 reset {
 108                         label = "reset";
 109                         gpios = <&gpio0 7 1>;
 110                         linux,code = <0x198>;
 111                 };
 112
 113                 wps {
 114                         label = "wps";
 115                         gpios = <&gpio0 5 1>;
 116                         linux,code = <0x211>;
 117                 };
 118         };
 119
 120         otg@101c0000 {
 121                 status = "okay";
 122         };
 123 };