target/linux/ramips/dts/WIZFI630A.dts

   1 /dts-v1/;
   2
   3 /include/ "rt5350.dtsi"
   4
   5 / {
   6         compatible = "wizfi630a", "ralink,rt5350-soc";
   7         model = "WIZnet WizFi630A";
   8
   9         chosen {
  10                 bootargs = "console=ttyS1,115200";
  11         };
  12
  13         palmbus@10000000 {
  14                 gpio1: gpio@660 {
  15                         status = "okay";
  16                 };
  17
  18                 spi@b00 {
  19                         status = "okay";
  20
  21                         m25p80@0 {
  22                                 #address-cells = <1>;
  23                                 #size-cells = <1>;
  24                                 compatible = "jedec,spi-nor";
  25                                 reg = <0>;
  26                                 linux,modalias = "m25p80", "w25q128";
  27                                 spi-max-frequency = <10000000>;
  28
  29                                 partition@0 {
  30                                         label = "uboot";
  31                                         reg = <0x0 0x30000>;
  32                                         read-only;
  33                                 };
  34
  35                                 partition@30000 {
  36                                         label = "uboot-env";
  37                                         reg = <0x30000 0x10000>;
  38                                         read-only;
  39                                 };
  40
  41                                 factory: partition@40000 {
  42                                         label = "factory";
  43                                         reg = <0x40000 0x10000>;
  44                                         read-only;
  45                                 };
  46
  47                                 partition@50000 {
  48                                         label = "firmware";
  49                                         reg = <0x50000 0xfb0000>;
  50                                 };
  51                         };
  52                 };
  53
  54                 uart@500 {
  55                         compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
  56                         reg = <0x500 0x100>;
  57                         resets = <&rstctrl 12>;
  58                         reset-names = "uart";
  59                         interrupt-parent = <&intc>;
  60                         interrupts = <5>;
  61                         reg-shift = <2>;
  62                         pinctrl-names = "default";
  63                         pinctrl-0 = <&uartf_pins>;
  64                         status = "okay";
  65                 };
  66
  67                 uartlite@c00 {
  68                         compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
  69                         reg = <0xc00 0x100>;
  70                         resets = <&rstctrl 19>;
  71                         reset-names = "uartl";
  72                         interrupt-parent = <&intc>;
  73                         interrupts = <12>;
  74                         reg-shift = <2>;
  75                         pinctrl-names = "default";
  76                         pinctrl-0 = <&uartlite_pins>;
  77                 };
  78         };
  79
  80         pinctrl {
  81                 state_default: pinctrl0 {
  82                         gpio {
  83                                 ralink,group = "i2c", "jtag" ;
  84                                 ralink,function = "gpio";
  85                         };
  86                 };
  87
  88                 uartf_gpio_pins: uartf_gpio {
  89                         uartf_gpio {
  90                                 ralink,group = "uartf";
  91                                 ralink,function = "uartf";
  92                         };
  93                 };
  94
  95                 uartlite_pins: uartlite {
  96                         uart {
  97                                 ralink,group = "uartlite";
  98                                 ralink,function = "uartlite";
  99                         };
 100                 };
 101         };
 102
 103         ethernet@10100000 {
 104                 mtd-mac-address = <&factory 0x4>;
 105         };
 106
 107         esw@10110000 {
 108                 mediatek,portmap = <0x17>;
 109         };
 110
 111         wmac@10180000 {
 112                 ralink,mtd-eeprom = <&factory 0>;
 113         };
 114
 115         ehci@101c0000 {
 116                 status = "okay";
 117         };
 118
 119         ohci@101c1000 {
 120                 status = "okay";
 121         };
 122
 123         gpio-export {
 124                 compatible = "gpio-export";
 125                 #size-cells = <0>;
 126         };
 127
 128         gpio-leds {
 129                 compatible = "gpio-leds";
 130
 131                 run {
 132                         label = "wizfi630a::run";
 133                         gpios = <&gpio0 1 1>;
 134                 };
 135
 136                 wps {
 137                         label = "wizfi630a::wps";
 138                         gpios = <&gpio0 20 1>;
 139                 };
 140
 141                 uart1 {
 142                         label = "wizfi630a::uart1";
 143                         gpios = <&gpio0 18 1>;
 144                 };
 145
 146                 uart2 {
 147                         label = "wizfi630a::uart2";
 148                         gpios = <&gpio0 21 1>;
 149                 };
 150         };
 151
 152         gpio-keys-polled {
 153                 compatible = "gpio-keys-polled";
 154                 #address-cells = <1>;
 155                 #size-cells = <0>;
 156                 poll-interval = <20>;
 157
 158                 reset {
 159                         label = "reset";
 160                         gpios = <&gpio0 17 1>;
 161                         linux,code = <0x198>;
 162                 };
 163
 164                 wps {
 165                         label = "wps";
 166                         gpios = <&gpio0 0 1>;
 167                         linux,code = <0x211>;
 168                 };
 169
 170                 scm1 {
 171                         label = "SCM1";
 172                         gpios = <&gpio0 19 1>;
 173                         linux,code = <0x100>;
 174                 };
 175
 176                 scm2 {
 177                         label = "SCM2";
 178                         gpios = <&gpio0 2 1>;
 179                         linux,code = <0x101>;
 180                 };
 181         };
 182 };